BIS - LIMS (Laboratory Information Management System)

Basil Quality Testing lab Private Limited

Plot No. 6, Udyog Vihar, Phase 1, Guruhram, Gurugram, Haryana, 122016

9289723427 quality.in@basilrl.com

Scope List

Reset

3 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 9873 : Part 4 (2017)

Safety of toys: Part 4 swings, slides and similar activity toys for indoor and outdoor family domestic use

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 and 6.2.1( Strength of toys other than swings)	-	500	As per Standard Requirements
4.1.2 and A.4.1.2(Maximum height)	-	500	As per Standard Requirements
4.1.3 and A.4.1.3(Corners and edges on moving parts)	-	500	As per Standard Requirements
4.1.3 and A.4.1.3(Corners and edges other than moving parts)	-	500	As per Standard Requirements
4.1.4.1 and 6.7.1 and Fig.6(Protruding parts)	-	500	As per Standard Requirements
4.1.4.2 and 6.7.1 and Fig.7(All protrusions)	-	500	As per Standard Requirements
4.1.4.3 and 6.7.1 and Fig.8(Upright protrusions)	-	500	As per Standard Requirements
4.1.4.4 and 6.7.2 (Motion rides)	-	500	As per Standard Requirements
4.1.4.5 and 6.7.1.2 and Fig.9(Slides)	-	500	As per Standard Requirements
4.1.4.5 (Slides)	-	500	As per Standard Requirements
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	500	As per Standard Requirements
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	500	As per Standard Requirements
4.1.6 (Open tubing IS 9873 -1 / ISO 8124-1.)	-	500	As per Standard Requirements
4.2 and A.4.2.(Barriers-Barriers for platforms from 760 mm to 1 000 mm above the ground)	-	500	As per Standard Requirements
4.2 and A.4.2.(Barriers-Barriers for platforms greater than 1 000 mm and up to 1 830 mm above the ground)	-	500	As per Standard Requirements
4.2 and A.4.2.(Barriers for platforms more than 1 830 mm above the ground)	-	500	As per Standard Requirements
4.2 and A.4.2.(Barriers for platforms from 760 mm to 1 000 mm above the ground shall have a maximum vertical opening of 610 mm between the lowermost member of the barrier and the platform that it surrounds.)	-	500	As per Standard Requirements
4.2 and A.4.2.(Barriers for platforms more than 1 000 mm above the ground shall be designed to minimize the likelihood of climbing. Openings within these barriers or between the barrier and the platform surface shall not permit the passage of the torso probe defined in 6.5.1)	-	500	As per Standard Requirements
4.2 and A.4.2. and 4.6.2 and 4.6.3(For barriers with an uneven top design)	-	500	As per Standard Requirements
4.2 and A.4.2. and 6.3(Dynamic strength of barriers and handrails)	-	500	As per Standard Requirements
4.3(Rung ladders, stepladders and stairways)	-	500	As per Standard Requirements
4.3 a and Fig.10(The rung or tread shall have a substantial horizontal stepping surface with a lateral width of 240 mm or more)	-	500	As per Standard Requirements
4.3 b and Fig.10(The distance between the upper surface of the rungs or treads on rung ladders or stepladders shall not be more than 310 mm and on stairways not more 230 mm when measured vertically in accordance with Figure 10.)	-	500	As per Standard Requirements
4.3 c(The surface of the tread shall not be slippery)	-	500	As per Standard Requirements
4.3 d(The diameter or cross-sectional dimension of the rungs on rung ladders)	-	500	As per Standard Requirements
4.3.e(The depth of treads on stepladders with closed risers or stairways)	-	500	As per Standard Requirements
4.3 f(The inclination of stairways)	-	500	As per Standard Requirements
4.3 f(The inclination of stepladders)	-	500	As per Standard Requirements
4.3 f(The inclination of rung ladders)	-	500	As per Standard Requirements
4.3 g(Stairways and stepladders with a height of 1 200 mm or more above the ground shall be provided with a means of continuous hand support from a height of 760 mm)	-	500	As per Standard Requirements
4.3 g(A means of continuous hand support from a height of 760 mm)	-	500	As per Standard Requirements
4.4.1 (Head and neck entrapment)	-	500	As per Standard Requirements
4.4.2(Entrapment of clothing and hair)	-	500	As per Standard Requirements
4.4.3(Entrapment of feet)	-	500	As per Standard Requirements
4.4.4(Entrapment of fingers)	-	500	As per Standard Requirements
4.5.1(Stability of activity toys other than slides, swings and toys with crossbeams - General)	-	500	As per Standard Requirements
4.5.2(Stability of activity toys with a free height of fall of 600 mm or less)	-	500	As per Standard Requirements
4.5.3(Stability of activity toys with a free height of fall of more than 600 mm)	-	500	As per Standard Requirements
4.6.1 and A.4.6.(Stability of slides)	-	500	As per Standard Requirements
4.6.2 a and A.4.6.(Retaining sides for slides -For slides with a height of more than 1 000 mm above the ground, the height, h, of the retaining sides shall be 100 mm or more)	-	500	As per Standard Requirements
4.6.2 b and A.4.6.(Retaining sides for slides - For slides with a height of 1 000 mm or less above the ground, the height, h, of the retaining sides shall be 50 mm or more.)	-	500	As per Standard Requirements
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	500	As per Standard Requirements
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	500	As per Standard Requirements
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	500	As per Standard Requirements
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	500	As per Standard Requirements
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	500	As per Standard Requirements
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	500	As per Standard Requirements
4.6.3 c and A.4.6.(Starting, sliding and run-out section on slides)	-	500	As per Standard Requirements
4.6.3 d and A.4.6.(The angle of inclination to the horizontal of the sliding section)	-	500	As per Standard Requirements
4.6.3 e and A.4.6.(The run-out section for the slide)	-	500	As per Standard Requirements
5.4(Warnings)	-	500	As per Standard Requirements
5.3(Maintenance instructions)	-	500	As per Standard Requirements
5.2(Assembly and installation instructions)	-	500	As per Standard Requirements
4.6.3 e and A.4.6.(The run-out section for the slide)	-	500	As per Standard Requirements
5.1(Labelling)	-	500	As per Standard Requirements
4.11.3(Paddling pools with inflatable walls)	-	500	As per Standard Requirements
4.11.3(Paddling pools with inflatable walls)	-	500	As per Standard Requirements
4.11.2(Edges, points, and small parts)	-	500	As per Standard Requirements
4.6.3 e and A.4.6.(The run-out section for the slide)	-	500	As per Standard Requirements
4.11.2(Edges, points, and small parts)	-	500	As per Standard Requirements
4.11.1(Paddling pools - General)	-	500	As per Standard Requirements
4.6.3 f and A.4.6.(The finishing end of the run-out section shall have a radius of 25 mm or more through at least 90°)	-	500	As per Standard Requirements
4.10.4.4 b and A.4.10(the opening of any tunnel or squeeze point under any platform shall not be reduced in height by more than 50 % within 30 s.)	-	500	As per Standard Requirements
4.6.4 and A.4.6.(Roller slides)	-	500	As per Standard Requirements
4.6.4 and A.4.6.(Roller slides)	-	500	As per Standard Requirements
4.6.4 and A.4.6.(Roller slides)	-	500	As per Standard Requirements
4.6.4 and A.4.6.(Roller slides)	-	500	As per Standard Requirements
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	500	As per Standard Requirements
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	500	As per Standard Requirements
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	500	As per Standard Requirements
4.7.1.2 and A.4.7.(Swings with crossbeams more than 1 200 mm above the ground)	-	500	As per Standard Requirements
4.7.1.3 and A.4.7.(Swings intended for children under 36 months with crossbeams 1 200 mm or less above the ground)	-	500	As per Standard Requirements
4.7.2 and A.4.7.2(Strength of crossbeams, swing devices, suspension connectors and suspension couplings)	-	500	As per Standard Requirements
4.7.3.1(Swings intended for children under 36 months)	-	500	As per Standard Requirements
4.10.4.4 a and A.4.10(When tested in accordance with 6.9 the minimum time taken for the test load to reach its lowest point )	-	500	As per Standard Requirements
4.10.4.4 and A.4.10(Safe collapse)	-	500	As per Standard Requirements
4.10.4.3 and A.4.10(The remaining length of slopes greater than 30° that are 760 mm or more above the ground shall be provided with containing walls with a minimum height of 900 mm.)	-	500	As per Standard Requirements
4.10.4.3 and A.4.10(The first metre at the top of slopes)	-	500	As per Standard Requirements
4.10.4.3 and A.4.10(Slopes shall be treated as a platform.)	-	500	As per Standard Requirements
4.10.4.2 and A.4.10(Permanently roofed Containment walls)	-	500	As per Standard Requirements
4.10.4.2 and A.4.10(Containment walls with a minimum height )	-	500	As per Standard Requirements
4.10.4.2 and A.4.10(Platforms - Any platform intended for sitting or standing)	-	500	As per Standard Requirements
4.10.4.1 and A.4.10(Containment - General)	-	500	As per Standard Requirements
4.10.4.1 and A.4.10(Containment - General)	-	500	As per Standard Requirements
4.10.4.1 and A.4.10(Containment - General)	-	500	As per Standard Requirements
4.10.4.1 and A.4.10(Containment - General)	-	500	As per Standard Requirements
4.10.3 and A.4.10(Connection tubes for continuous inflation)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.1 and A.4.10(Inflatable activity toys - General)	-	500	As per Standard Requirements
4.9(Free height of fall for carousels and rocking toys)	-	500	As per Standard Requirements
4.9(Carousels and rocking toys)	-	500	As per Standard Requirements
4.9(Carousels and rocking toys)	-	500	As per Standard Requirements
4.8(Seesaws )	-	500	As per Standard Requirements
4.8(Seesaws - The sitting or standing position of the seesaw may swing out of the horizontal)	-	500	As per Standard Requirements
4.8(Seesaws - The central point of the sitting or standing position of the seesaw shall not exceed a height)	-	500	As per Standard Requirements
4.7.8 f and A.4.7.8(Suspension connectors and means of suspension)	-	500	As per Standard Requirements
4.7.8 e and A.4.7.8(Suspension connectors and means of suspension)	-	500	As per Standard Requirements
4.7.3.1(Swings intended for children under 36 months)	-	500	As per Standard Requirements
4.7.3.2(Toddler swings without a crossbeam)	-	500	As per Standard Requirements
4.7.4(Impact from swing elements - swing elements shall not impart an average peak value of acceleration)	-	500	As per Standard Requirements
4.7.4(Impact from swing elements - Average surface compression)	-	500	As per Standard Requirements
4.7.5(Minimum clearance between swing elements, and similar equipment and adjacent structures)	-	500	As per Standard Requirements
4.7.5(Free swinging elements)	-	500	As per Standard Requirements
4.7.5(Elements excluding free swinging)	-	500	As per Standard Requirements
4.7.6 and A.4.7.6(Lateral stability of swing elements - The minimum distance between the suspension points of a swing measured along the crossbeam)	-	500	As per Standard Requirements
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with flexible means of suspension where the crossbeam height is greater than 1 200 mm)	-	500	As per Standard Requirements
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with rigid means of suspension where the crossbeam height is greater than 1 200 mm)	-	500	As per Standard Requirements
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements where the crossbeam height is 1 200 mm or less)	-	500	As per Standard Requirements
4.7.7(Minimum clearance between swing elements and the ground - Footrests of swing elements)	-	500	As per Standard Requirements
4.7.8 a and A.4.7.8(Suspension connectors and means of suspension)	-	500	As per Standard Requirements
4.7.8 b and A.4.7.8(Suspension connectors and means of suspension)	-	500	As per Standard Requirements
4.7.8 c and A.4.7.8(Ropes used as means of suspension - Diameter )	-	500	As per Standard Requirements
4.7.8 d and A.4.7.8(Straps and chains - Width)	-	500	As per Standard Requirements
4.7.8 d and A.4.7.8(Accessible chains)	-	500	As per Standard Requirements
4.7.8 e and A.4.7.8(Suspension connectors and means of suspension)	-	500	As per Standard Requirements
4.7.8 f and A.4.7.8(Suspension connectors and means of suspension)	-	500	As per Standard Requirements
4.8(Seesaws - The central point of the sitting or standing position of the seesaw shall not exceed a height)	-	500	As per Standard Requirements
4.8(Seesaws - The sitting or standing position of the seesaw may swing out of the horizontal)	-	500	As per Standard Requirements
4.8(Seesaws )	-	500	As per Standard Requirements
4.9(Carousels and rocking toys)	-	500	As per Standard Requirements
4.9(Carousels and rocking toys)	-	500	As per Standard Requirements
4.9(Free height of fall for carousels and rocking toys)	-	500	As per Standard Requirements
4.10.1 and A.4.10(Inflatable activity toys - General)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.3 and A.4.10(Connection tubes for continuous inflation)	-	500	As per Standard Requirements
4.10.4.1 and A.4.10(Containment - General)	-	500	As per Standard Requirements
4.10.4.1 and A.4.10(Containment - General)	-	500	As per Standard Requirements
4.10.4.1 and A.4.10(Containment - General)	-	500	As per Standard Requirements
4.10.4.1 and A.4.10(Containment - General)	-	500	As per Standard Requirements
4.10.4.2 and A.4.10(Platforms - Any platform intended for sitting or standing)	-	500	As per Standard Requirements
4.10.4.2 and A.4.10(Containment walls with a minimum height )	-	500	As per Standard Requirements
4.10.4.2 and A.4.10(Permanently roofed Containment walls)	-	500	As per Standard Requirements
4.10.4.3 and A.4.10(Slopes shall be treated as a platform.)	-	500	As per Standard Requirements
4.10.4.3 and A.4.10(The first metre at the top of slopes)	-	500	As per Standard Requirements
4.10.4.3 and A.4.10(The remaining length of slopes greater than 30° that are 760 mm or more above the ground shall be provided with containing walls with a minimum height of 900 mm.)	-	500	As per Standard Requirements
4.10.4.4 and A.4.10(Safe collapse)	-	500	As per Standard Requirements
4.10.4.4 a and A.4.10(When tested in accordance with 6.9 the minimum time taken for the test load to reach its lowest point )	-	500	As per Standard Requirements
4.10.4.4 b and A.4.10(the opening of any tunnel or squeeze point under any platform shall not be reduced in height by more than 50 % within 30 s.)	-	500	As per Standard Requirements
4.11.1(Paddling pools - General)	-	500	As per Standard Requirements
4.11.2(Edges, points, and small parts)	-	500	As per Standard Requirements
4.11.2(Edges, points, and small parts)	-	500	As per Standard Requirements
4.11.3(Paddling pools with inflatable walls)	-	500	As per Standard Requirements
4.11.3(Paddling pools with inflatable walls)	-	500	As per Standard Requirements
5.1(Labelling)	-	500	As per Standard Requirements
5.2(Assembly and installation instructions)	-	500	As per Standard Requirements
5.3(Maintenance instructions)	-	500	As per Standard Requirements
5.4(Warnings)	-	500	As per Standard Requirements
4.1.1 and 6.2.1( Strength of toys other than swings)	-	500	As per Standard Requirements
4.1.2 and A.4.1.2(Maximum height)	-	500	As per Standard Requirements
4.1.3 and A.4.1.3(Corners and edges on moving parts)	-	500	As per Standard Requirements
4.1.3 and A.4.1.3(Corners and edges other than moving parts)	-	500	As per Standard Requirements
4.1.4.1 and 6.7.1 and Fig.6(Protruding parts)	-	500	As per Standard Requirements
4.1.4.2 and 6.7.1 and Fig.7(All protrusions)	-	500	As per Standard Requirements
4.1.4.3 and 6.7.1 and Fig.8(Upright protrusions)	-	500	As per Standard Requirements
4.1.4.4 and 6.7.2 (Motion rides)	-	500	As per Standard Requirements
4.1.4.5 and 6.7.1.2 and Fig.9(Slides)	-	500	As per Standard Requirements
4.1.4.5 (Slides)	-	500	As per Standard Requirements
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	500	As per Standard Requirements
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	500	As per Standard Requirements
4.1.6 (Open tubing IS 9873 -1 / ISO 8124-1.)	-	500	As per Standard Requirements
4.2 and A.4.2.(Barriers-Barriers for platforms from 760 mm to 1 000 mm above the ground)	-	500	As per Standard Requirements
4.2 and A.4.2.(Barriers-Barriers for platforms greater than 1 000 mm and up to 1 830 mm above the ground)	-	500	As per Standard Requirements
4.2 and A.4.2.(Barriers for platforms more than 1 830 mm above the ground)	-	500	As per Standard Requirements
4.2 and A.4.2.(Barriers for platforms from 760 mm to 1 000 mm above the ground shall have a maximum vertical opening of 610 mm between the lowermost member of the barrier and the platform that it surrounds.)	-	500	As per Standard Requirements
4.2 and A.4.2.(Barriers for platforms more than 1 000 mm above the ground shall be designed to minimize the likelihood of climbing. Openings within these barriers or between the barrier and the platform surface shall not permit the passage of the torso probe defined in 6.5.1)	-	500	As per Standard Requirements
4.2 and A.4.2. and 4.6.2 and 4.6.3(For barriers with an uneven top design)	-	500	As per Standard Requirements
4.2 and A.4.2. and 6.3(Dynamic strength of barriers and handrails)	-	500	As per Standard Requirements
4.3(Rung ladders, stepladders and stairways)	-	500	As per Standard Requirements
4.3 a and Fig.10(The rung or tread shall have a substantial horizontal stepping surface with a lateral width of 240 mm or more)	-	500	As per Standard Requirements
4.3 b and Fig.10(The distance between the upper surface of the rungs or treads on rung ladders or stepladders shall not be more than 310 mm and on stairways not more 230 mm when measured vertically in accordance with Figure 10.)	-	500	As per Standard Requirements
4.3 c(The surface of the tread shall not be slippery)	-	500	As per Standard Requirements
4.3 d(The diameter or cross-sectional dimension of the rungs on rung ladders)	-	500	As per Standard Requirements
4.3.e(The depth of treads on stepladders with closed risers or stairways)	-	500	As per Standard Requirements
4.3 f(The inclination of stairways)	-	500	As per Standard Requirements
4.3 f(The inclination of stepladders)	-	500	As per Standard Requirements
4.3 f(The inclination of rung ladders)	-	500	As per Standard Requirements
4.3 g(Stairways and stepladders with a height of 1 200 mm or more above the ground shall be provided with a means of continuous hand support from a height of 760 mm)	-	500	As per Standard Requirements
4.3 g(A means of continuous hand support from a height of 760 mm)	-	500	As per Standard Requirements
4.4.1 (Head and neck entrapment)	-	500	As per Standard Requirements
4.4.2(Entrapment of clothing and hair)	-	500	As per Standard Requirements
4.4.3(Entrapment of feet)	-	500	As per Standard Requirements
4.4.4(Entrapment of fingers)	-	500	As per Standard Requirements
4.5.1(Stability of activity toys other than slides, swings and toys with crossbeams - General)	-	500	As per Standard Requirements
4.6.1 and A.4.6.(Stability of slides)	-	500	As per Standard Requirements
4.5.2(Stability of activity toys with a free height of fall of 600 mm or less)	-	500	As per Standard Requirements
4.5.3(Stability of activity toys with a free height of fall of more than 600 mm)	-	500	As per Standard Requirements
4.6.2 a and A.4.6.(Retaining sides for slides -For slides with a height of more than 1 000 mm above the ground, the height, h, of the retaining sides shall be 100 mm or more)	-	500	As per Standard Requirements
4.6.2 b and A.4.6.(Retaining sides for slides - For slides with a height of 1 000 mm or less above the ground, the height, h, of the retaining sides shall be 50 mm or more.)	-	500	As per Standard Requirements
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	500	As per Standard Requirements
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	500	As per Standard Requirements
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	500	As per Standard Requirements
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	500	As per Standard Requirements
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	500	As per Standard Requirements
4.6.3 c and A.4.6.(Starting, sliding and run-out section on slides)	-	500	As per Standard Requirements
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	500	As per Standard Requirements
4.6.3 d and A.4.6.(The angle of inclination to the horizontal of the sliding section)	-	500	As per Standard Requirements
4.6.3 e and A.4.6.(The run-out section for the slide)	-	500	As per Standard Requirements
4.6.3 e and A.4.6.(The run-out section for the slide)	-	500	As per Standard Requirements
4.6.3 e and A.4.6.(The run-out section for the slide)	-	500	As per Standard Requirements
4.6.3 f and A.4.6.(The finishing end of the run-out section shall have a radius of 25 mm or more through at least 90°)	-	500	As per Standard Requirements
4.6.4 and A.4.6.(Roller slides)	-	500	As per Standard Requirements
4.6.4 and A.4.6.(Roller slides)	-	500	As per Standard Requirements
4.6.4 and A.4.6.(Roller slides)	-	500	As per Standard Requirements
4.6.4 and A.4.6.(Roller slides)	-	500	As per Standard Requirements
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	500	As per Standard Requirements
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	500	As per Standard Requirements
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	500	As per Standard Requirements
4.7.1.2 and A.4.7.(Swings with crossbeams more than 1 200 mm above the ground)	-	500	As per Standard Requirements
4.7.1.3 and A.4.7.(Swings intended for children under 36 months with crossbeams 1 200 mm or less above the ground)	-	500	As per Standard Requirements
4.7.2 and A.4.7.2(Strength of crossbeams, swing devices, suspension connectors and suspension couplings)	-	500	As per Standard Requirements
4.7.3.1(Swings intended for children under 36 months)	-	500	As per Standard Requirements
4.7.3.2(Toddler swings without a crossbeam)	-	500	As per Standard Requirements
4.7.4(Impact from swing elements - swing elements shall not impart an average peak value of acceleration)	-	500	As per Standard Requirements
4.7.4(Impact from swing elements - Average surface compression)	-	500	As per Standard Requirements
4.7.5(Minimum clearance between swing elements, and similar equipment and adjacent structures)	-	500	As per Standard Requirements
4.7.5(Free swinging elements)	-	500	As per Standard Requirements
4.7.5(Elements excluding free swinging)	-	500	As per Standard Requirements
4.7.6 and A.4.7.6(Lateral stability of swing elements - The minimum distance between the suspension points of a swing measured along the crossbeam)	-	500	As per Standard Requirements
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with flexible means of suspension where the crossbeam height is greater than 1 200 mm)	-	500	As per Standard Requirements
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with rigid means of suspension where the crossbeam height is greater than 1 200 mm)	-	500	As per Standard Requirements
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements where the crossbeam height is 1 200 mm or less)	-	500	As per Standard Requirements
4.7.7(Minimum clearance between swing elements and the ground - Footrests of swing elements)	-	500	As per Standard Requirements
4.7.8 a and A.4.7.8(Suspension connectors and means of suspension)	-	500	As per Standard Requirements
4.7.8 b and A.4.7.8(Suspension connectors and means of suspension)	-	500	As per Standard Requirements
4.7.8 c and A.4.7.8(Ropes used as means of suspension - Diameter )	-	500	As per Standard Requirements
4.7.8 d and A.4.7.8(Straps and chains - Width)	-	500	As per Standard Requirements
4.7.3.1(Swings intended for children under 36 months)	-	500	As per Standard Requirements

08 Jan, 2029

-
-

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	500	As per Applicable
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	500	As per Applicable
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	500	As per Applicable
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	500	As per Applicable
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	500	As per Applicable
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	500	As per Applicable
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	500	As per Applicable
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	500	As per Applicable
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	500	As per Applicable
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	500	As per Applicable
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	500	As per Applicable
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	500	As per Applicable
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	500	As per Applicable
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	500	As per Applicable
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	500	As per Applicable
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	500	As per Applicable
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	500	As per Applicable
4.5-5.5(Soft-filled toys-Test for soft-filled toys )	-	500	As per Applicable
4.1(General)	-	500	As per Applicable

08 Jan, 2029

-
-

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Normal use)	-	500	As per Standard Requirement
4.2(Reasonably foreseeable abuse)	-	500	As per Standard Requirement
4.3.1(Material quality)	-	500	As per Standard Requirement
4.3.2(Expanding materials)	-	500	As per Standard Requirement
4.4.1(For children under 36 months)	-	500	As per Standard Requirement
4.4.2(For children 36 months and over but under 72 months)	-	500	As per Standard Requirement
4.5.1.2(Squeeze toys, rattles, and certain other toys and components of toys)	-	500	As per Standard Requirement
4.5.1.3(Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months)	-	500	As per Standard Requirement
4.5.1.4(Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months)	-	500	As per Standard Requirement
4.5.2(Small balls)	-	500	As per Standard Requirement
4.5.4(Pre-school playfigures)	-	500	As per Standard Requirement
4.5.5(Toy pacifiers)	-	500	As per Standard Requirement
4.5.6(Balloons)	-	500	As per Standard Requirement
4.5.7(Marbles)	-	500	As per Standard Requirement
4.5.8(Hemisphericshaped toys)	-	500	As per Standard Requirement
4.6.1(Accessible sharp edges of glass or metal)	-	500	As per Standard Requirement
4.6.2(Functional sharp edges)	-	500	As per Standard Requirement
4.6.3(Edges on metal toys)	-	500	As per Standard Requirement
4.6.4(Edges on moulded toys)	-	500	As per Standard Requirement
4.6.5(Edges on exposed bolts or threaded rods)	-	500	As per Standard Requirement
4.7.1(Accessible sharp points)	-	500	As per Standard Requirement
4.7.2(Functional sharp points)	-	500	As per Standard Requirement
4.7.3(Wooden toys)	-	500	As per Standard Requirement
4.8(Projections)	-	500	As per Standard Requirement
4.9(Metal wires and rods)	-	500	As per Standard Requirement
4.10(Plastic film or plastic bags in packaging and in toys)	-	500	As per Standard Requirement
4.11.1(General)	-	500	As per Standard Requirement
4.11.2(Cords in toys intended for children under 18 months)	-	500	As per Standard Requirement
4.11.3(Cords in toys intended for children 18 months and over but under 36 months)	-	500	As per Standard Requirement
4.11.4(Fixed loops and nooses intended for children under 36 months)	-	500	As per Standard Requirement
4.11.5(Cords on pull toys)	-	500	As per Standard Requirement
4.11.6(Electrical cables)	-	500	As per Standard Requirement
4.11.7(Diameter of certain cords intended for children under 36 months)	-	500	As per Standard Requirement
4.11.8(Self-retracting cords intended for children under 36 months)	-	500	As per Standard Requirement
4.11.9(Toys attached to or intended to be strung across, or otherwise attached to, a cradle, cot, perambulator or carriage)	-	500	As per Standard Requirement
4.11.10(Cords on toy bags)	-	500	As per Standard Requirement
4.11.11(Cords, strings and lines for flying toys)	-	500	As per Standard Requirement
4.12.1(Toy pushchairs, perambulators and similar toys)	-	500	As per Standard Requirement
4.12.2(Other toys with folding mechanisms)	-	500	As per Standard Requirement
4.12.3(Hinge-line clearance)	-	500	As per Standard Requirement
4.13.1(Circular holes in rigid materials)	-	500	As per Standard Requirement
4.13.2(Accessible clearances for movable ,segments)	-	500	As per Standard Requirement
4.13.3(Chains or belts in ride-on toys)	-	500	As per Standard Requirement
4.13.4(Other driving mechanisms)	-	500	As per Standard Requirement
4.13.5(Winding keys)	-	500	As per Standard Requirement
4.14(Springs)	-	500	As per Standard Requirement
4.15.1.1(Sideways stability, feet available for stabilization)	-	500	As per Standard Requirement
4.15.1.2(Sideways stability, feet unavailable for stabilization)	-	500	As per Standard Requirement
4.15.1.3(Fore and aft stability)	-	500	As per Standard Requirement
4.15.2(Overload requirements for ride-on toys and seats)	-	500	As per Standard Requirement
4.15.3(Stability of stationary floor toys)	-	500	As per Standard Requirement
4.16.1(Ventilation)	-	500	As per Standard Requirement
4.16.2.1(Lids, doors and similar devices)	-	500	As per Standard Requirement
4.16.2.2(Lid support for toy chests and similar toys)	-	500	As per Standard Requirement
4.16.3(Toys that enclose the head)	-	500	As per Standard Requirement
4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	500	As per Standard Requirement
4.18.2(Projectiles)	-	500	As per Standard Requirement
4.18.3(Projectile toys with stored energy)	-	500	As per Standard Requirement
4.18.4(Projectile toys without stored energy)	-	500	As per Standard Requirement
4.19(Rotors and propellers)	-	500	As per Standard Requirement
4.20(Aquatic toys)	-	500	As per Standard Requirement
4.21(Braking)	-	500	As per Standard Requirement
4.22.1(Instructions for use)	-	500	As per Standard Requirement
4.22.2(Determination of maximum saddle height)	-	500	As per Standard Requirement
4.22.3(Braking requirements)	-	500	As per Standard Requirement
4.23(Speed limitation of electrically driven ride-on toys)	-	500	As per Standard Requirement
4.24(Toys containing a heat source)	-	500	As per Standard Requirement
4.25(Liquid -filled toys)	-	500	As per Standard Requirement
4.26(Mouth - actuated toys)	-	500	As per Standard Requirement
4.27(Toy roller skates, toy inline skates and toy skateboards)	-	500	As per Standard Requirement
4.28(Percussion caps specifically designed for use in toys)	-	500	As per Standard Requirement
4.29(Acoustic requirements)	-	500	As per Standard Requirement
4.30.2(Warnings and instructions for use)	-	500	As per Standard Requirement
4.30.3(Strength)	-	500	As per Standard Requirement
4.30.4(Stability)	-	500	As per Standard Requirement
4.30.5(Adjustable and folding steering tubes and handlebars)	-	500	As per Standard Requirement
4.30.6(Braking)	-	500	As per Standard Requirement
4.30.7(Wheel size)	-	500	As per Standard Requirement
4.30.8(Projections)	-	500	As per Standard Requirement
4.31.1(Magnetic/electrical experimental sets intended for children 8 years and over)	-	500	As per Standard Requirement
4.31.2(All other toys with magnets and magnetic components)	-	500	As per Standard Requirement
4.32(Yo-yo balls)	-	500	As per Standard Requirement
4.33(Straps intended to be worn fully or partially around the neck)	-	500	As per Standard Requirement
4.34(Sledges and toboggans with cords for pulling)	-	500	As per Standard Requirement
4.35(Jaw entrapment in handles and steering wheels)	-	500	As per Standard Requirement
4.1(Normal use)	-	500	As per Standard Requirement
4.2(Reasonably foreseeable abuse- Cl. 5.24.2 Drop test)	-	500	As per Standard Requirement
4.2(Reasonably foreseeable abuse- Cl. 5.24.3 Tip-over test for large and bulky toys)	-	500	As per Standard Requirement
4.2(Reasonably foreseeable abuse- Cl. 5.24.4 Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	500	As per Standard Requirement
4.2(Reasonably foreseeable abuse- Cl. 5.24.5 Torque test)	-	500	As per Standard Requirement
4.2(Reasonably foreseeable abuse- Cl. 5.24.6.1- Tension test- General)	-	500	As per Standard Requirement
4.2("Reasonably foreseeable abuse- Cl. 5.24.6.2- Tension test- Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys ")	-	500	As per Standard Requirement
4.2(Reasonably foreseeable abuse- Cl. 5.24.6.3- Tension test- Tension test for pompoms)	-	500	As per Standard Requirement
4.2(Reasonably foreseeable abuse- Cl. 5.24.6.4- Tension test- Tension test for protective components)	-	500	As per Standard Requirement
4.5.3(Pompoms)	-	500	As per Standard Requirement

08 Jan, 2029

-
-

Bureau of Indian Standards

The National Standards Body of India

Basil Quality Testing lab Private Limited

Plot No. 6, Udyog Vihar, Phase 1, Guruhram, Gurugram, Haryana, 122016

9289723427 quality.in@basilrl.com

Scope List