BIS - LIMS (Laboratory Information Management System)

TECHNOPOWER TECH SOLUTIONS LLP

Shed No. 11, Type-B, Block No-1, Sector 1, Govindpura Industrial Area, Bhopal, Bhopal, Madhya Pradesh, 462023

9074790634 technopower.tech.solu@gmail.com

Scope List

Reset

1 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 1180 : Part 1 (2014)

Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed (Fourth Revision)

Outdoor Type, Oil Immersed, Distribution Transformers Up to and Including 315 KVA, 11/0.433 KV.

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.2 a)(Measurement of winding resistance )	-	1000	-
21.2 b)( Measurement of voltage ratio and check of phase displacemen)	-	1000	-
21.2 c)( Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load)	-	5000	-
21.2 d)(Measurement of no-load loss and current)	-	2000	-
21.2 e)(Measurement of insulation resistance)	-	1000	-
21.2 f)(Induced over-voltage withstand test)	-	2000	-
21.2 g)( Separate-source voltage withstand test)	-	3000	-
21.5.2.3( Oil leakage test (routine test))	-	1000	-
21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA ))	-	3000	-
6.8 (50%)(Total losses at 50 % load (Watts))	-	5000	-
6.8 (100%)(Total losses at 100 % load (Watts))	-	5000	-
7.8 (50%)(Total losses at 50 % load (Watts))	-	5000	-
7.8 (100%)(Total losses at 100 % load (Watts))	-	5000	-
6.9, 7.9, 8.9(Permissible Flux Density and Over Fluxing)	-	1000	-
10(Terminal arrangment )	-	500	-
11(Minimum clearance in Air)	-	500	-
21.4 c(No load current at 112.5 percent voltage.)	-	2000	-
21.5.1.3(Oil leakage test upto 200 KVA)	-	1000	-
13.1(Marking (Rating Plates))	-	500	-
13.2(Terminal Marking Plate)	-	500	-
13.3(Marking )	-	500	-
13.4(Marking)	-	500	-
13.4.1(Marking)	-	500	-
14.1(MOUNTING ARRANGEMENT)	-	700	-
14.2(MOUNTING ARRANGEMENT)	-	700	-
14.3(MOUNTING ARRANGEMENT)	-	700	-
14.4(MOUNTING ARRANGEMENT)	-	700	-
21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA ))	-	3000	-
21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test))	-	2000	-
21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test))	-	1000	-
21.5.3.3(Oil leakage test (routine test))	-	1000	-
16(Conservator for Non-sealed type Transformers)	-	500	-
20(Fittings)	-	1000	-
8.8 (50%)(Total losses at 50 % load (Watts))	-	5000	-
8.8 (100%)(Total losses at 100 % load (Watts))	-	5000	-
10(Terminal Arrangement)	-	700	-
15.2(Pressure and Vacuum Requirements)	-	1000	-
19(Tolerances)	-	500	-
18(Efficiency and regulation)	-	1000	-
21(General )	-	3000	-
5(General )	-	3000	-
6.1(Rating)	-	5000	-
6.2(Rated frequency)	-	1000	-
6.3(Nominal system voltage)	-	1000	-
6.4(Basic Insulation level )	-	2500	-
6.5(No-Load Voltage Ratios)	-	1000	-
6.6(Winding connections and phase displacement)	-	1000	-
6.7(Tapping Range and Tapping Method)	-	2000	-
6.8(Losses and impedance values)	-	5000	-
6.9(Permissible Flux Density and Over Fluxing )	-	2000	-
11(Minimum Clearnaces air )	-	500	-
13(Marking )	-	500	-
14(Mounting arrangement)	-	500	-
16(Conservator for Non-Sealed type Transformers)	-	500	-
18(Efficiency and Regulation)	-	1000	-
19(Tolerances)	-	2000	-
20(Fittings)	-	3000	-
15.4(Gasket)	-	1000	-
15.1.1(TRANSFORMER TANK : Construction)	-	250	-
15.1.2(TRANSFORMER TANK : Construction)	-	250	-
15.1.3(TRANSFORMER TANK : Construction)	-	250	-
15.1.4(TRANSFORMER TANK : Construction)	-	250	-
15.1.5(TRANSFORMER TANK : Construction)	-	250	-
21.5.2.1(Type test : For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	500	-
21.5.2.2(routine test :For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	500	-
15(Trasnformer Tank )	-	250	-
21.5.3.3(Oil leakage test)	-	500	-

07 Aug, 2028

-
Exclusion: 21.3(a )-Lightning impulse test, 21.3(b)- Temperature rise test ,21.3(c)-Short-circuit withstand test, 21.4-special test, 9-Material testing.

Bureau of Indian Standards

The National Standards Body of India

TECHNOPOWER TECH SOLUTIONS LLP

Shed No. 11, Type-B, Block No-1, Sector 1, Govindpura Industrial Area, Bhopal, Bhopal, Madhya Pradesh, 462023

9074790634 technopower.tech.solu@gmail.com

Scope List