BIS - LIMS (Laboratory Information Management System)

Accumetrix Testing Solutions Pvt. Ltd.

NEW VEENA VALLEY, SALWARA, HOSHIARPUR, Hoshiarpur, Punjab, 146001

8465000026 accumetrixtestingsolutions@gmail.com

Scope List

Reset

5 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	900	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	900	-
5.4.2(a)( Aggregates Impact Value)	-	350	-
5.4.2(b)( Aggregates Impact Value)	-	350	-
5.4.3(a)( Aggregate Abrasion Value)	-	700	-
5.4.3(b)( Aggregate Abrasion Value)	-	700	-
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	350	-
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	100	-
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	100	-
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	100	-
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	100	-
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	100	-
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	100	-
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	100	-
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	100	-
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	100	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Class)	-	350	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size)	-	350	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	100	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	100	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	100	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	100	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	100	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	100	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve)	-	100	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve)	-	100	-
6.2-Table 7(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Nominal Size of aggregate)	-	350	-
6.2-Table 7(i)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 80 mm sieve)	-	100	-
6.2-Table 7(ii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 63 mm sieve)	-	100	-
6.2-Table 7(iii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 40 mm sieve)	-	100	-
6.2-Table 7(iv)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 20 mm sieve)	-	100	-
6.2-Table 7(v)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 16 mm sieve)	-	100	-
6.2-Table 7(vi)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 12.5 mm sieve)	-	100	-
6.2-Table 7(vii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 10 mm sieve)	-	100	-
6.2-Table 7(viii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 4.75 mm sieve)	-	100	-
6.2-Table 7(ix)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 2.36 mm sieve)	-	100	-
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	350	-
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	100	-
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	100	-
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	100	-
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	100	-
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	100	-
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	100	-
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	100	-
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size )	-	350	-
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve )	-	100	-
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	100	-
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	100	-
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve )	-	100	-
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve )	-	100	-
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	100	--
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	400	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	400	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	400	-
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	400	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	1500	-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	1500	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	500	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	1000	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	1000	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	1000	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	1000	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	400	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	400	-
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate))	-	400	-
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	400	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	1500	-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	1500	-
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	800	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	1000	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	1000	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	1000	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	1000	-
7.2(Bulk Density loose)	-	1000	-
7.2(Bulk Density Rodded)	-	1000	-
7.2(Bulk Density loose)	-	1000	-
7.2(Bulk Density Rodded)	-	1000	-
5.3(Elongation Index)	-	800	-
5.3(Flakiness Index)	-	800	-
5.6(Alkali Agregate Reaction )	-	1500	-
5.7 table 3(WaterAbsorption)	-	400	-
5.7 table 3(Specific Gravity)	-	400	-
5.3(Flakiness & Elongation)	-	800	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	1500	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	1500	-
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale))	-	1000	-
3.2.2 Table 3 ii) IS 1963(Basicity as CaO/SiO2)	-	1500	-
Clause 5.6(Dissolved Silica)	-	1500	-
Clause 5.6(Reduction in Alkalinity)	-	1500	-
5.5(Soundness By Magnesium Sulphate)	-	1500	-
5.5(Soundness By Magnesium Sulphate)	-	1500	-
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	400	-
Clause 5.1(General)	-	300	-
5.2- TABLE-2- (Note-3) IS-2386 (P-2)(Mica content (fine aggregate))	-	200	-
7.2(Bulking Of Fine Aggregate)	-	200	-
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	300	-

19 Sep, 2028

-
Scope restricted to Aggregates from natural Resources only.

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.1(Average Compressive Strength)	-	3000	3000 for cube compressive strength
16.1(Compressive Strength of Individual Samples )	-	3000	3000 for cube compressive strength
16.1(Compressive Strength of Individual Samples )	-	3000	3000 for cube compressive strength
16.1(Compressive Strength of Individual Samples )	-	3000	3000 for cube compressive strength
17.4(Core test)	-	3000	3000 for cube compressive strength
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	100	-
5.4-Table-1 (iv)-IS: 3025(P-32)(Chloride)	-	150	-
5.4-Table-1 (iii)-IS: 3025(P-32)(Chloride)	-	150	-
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate)	-	100	-
5.4-Table-1 (i)-IS: 3025(P-18)(In-Organic)	-	100	-
5.4-Table-1 (i)-IS: 3025(P-18)(Organic )	-	100	-
5.4.2-IS: 3025(P-11)(Ph)	-	100	-
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	100	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	100	-
Cl 5.4 Table 1 (v)(Suspended Matter)	-	100	-
Cl 5.4 Table 1 (iv)(Chloride)	-	150	-
Cl 5.4 Table 1 (iii)(Sulphate)	-	100	-
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	100	-
Cl 5.4 Table 1 (i)(Organic Solids)	-	100	-
Cl 5.4 .2(pH)	-	100	-
Cl 5.4 (b)(Alkalinity)	-	100	-
Cl 5.4 (a)(Acidity)	-	100	-

19 Sep, 2028

-
For Construction Water only For Compressive Strength only

IS 5820 (2024)

PRECAST CONCRETE CABLE COVERS â SPECIFICATION (first revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-7.2(Dimensions)	-	2000	-
Cl-7.3(Impact Strength)	-	6000	-
Cl-7.1(cable covers)	-	2000	-

19 Sep, 2028

-
Exclusion: Materials Cl-4, Design Cl-6 (Optional)

IS 13801 (2013)

Chequered Cement Concrete Tiles -

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	-
Cl 12.1(Concavity & Convexity )	-	200	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	200	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	200	-
Cl 12.4(Water absorption)	-	500	-
Cl 12.5(Wet transverse strength)	-	1500	-
Cl 12.6(Resistance to wear)	-	2500	-
Cl 11(Finish)	-	100	-
8.3(Thickness of wearing layer)	-	200	-
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	-
Cl 12.1(Concavity & Convexity )	-	200	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	200	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	200	-
Cl 12.4(Water absorption)	-	500	-
Cl 12.5(Wet transverse strength)	-	1500	-
Cl 12.6(Resistance to wear)	-	2500	-
Cl 11(Finish)	-	100	-
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	-
Cl 12.1(Concavity & Convexity )	-	200	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	200	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	200	-
Cl 12.4(Water absorption)	-	500	-
Cl 12.5(Wet transverse strength)	-	1500	-
Cl 12.6(Resistance to wear)	-	2500	-
Cl 11(Finish)	-	100	-
Cl 11(Finish)	-	100	-
Cl 12.6(Resistance to wear)	-	2500	-
Cl 12.5(Wet transverse strength)	-	1500	-
Cl 12.4(Water absorption)	-	500	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	200	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	200	-
Cl 12.1(Concavity & Convexity )	-	200	-
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	-

19 Sep, 2028

-
-

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

15500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	500	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	500	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	500	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	500	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	500	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	500	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	400	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	400	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	400	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	400	4000 for complete dimensions test.
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	750	750 for water absorption test
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	1600	1600 for Compressive strength test
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	1200	1200 for dry abrasion strength
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	1200	1200 for wet abrasion strength
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	2400	2400 for Tensile Splitting Strength/Failure load per unit length test.
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	4800	4800 for Flexural Strength/Breaking Load Test.
Clause 7.3, Annex G(Individual Breaking Load)	-	4800	4800 for Flexural Strength/Breaking Load Test.
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	2400	2400 for Tensile Splitting Strength/Failure load per unit length test.
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	4800	4800 for Flexural Strength/Breaking Load Test.
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	2400	2400 for Tensile Splitting Strength/Failure load per unit length test.
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	1200	1200 for wet abrasion strength
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	1200	1200 for Dry abrasion strength
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	1600	1600 for Compressive strength test
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	750	750 for water absorption test
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	400	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	400	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	400	4000 for complete dimensions test.
Clause 7.3, Annex G(Average Breaking Load)	-	4800	4800 for Flexural Strength/Breaking Load Test.
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	2400	2400 for Tensile Splitting Strength/Failure load per unit length test.
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	500	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	400	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	500	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	500	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	500	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	500	4000 for complete dimensions test.
Clause 7.1.3 (Colour and Texture)	-	100	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	100	-
Clause 7.1.1 (General Quality)	-	100	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	500	4000 for complete dimensions test.
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	500	4000 for complete dimensions test.
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	500	4000 for complete dimensions test.
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	500	4000 for complete dimensions test.
Clause 3.20(Spacer nibs)	-	500	4000 for complete dimensions test.
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Indivdual Compressive strength (ii))	-	1600	1600 for Compressive Strength Test.
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Indivdual Compressive strength - (iii))	-	1600	1600 for Compressive Strength Test.
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Indivdual Compressive strength -(iv))	-	1600	1600 for Compressive Strength Test.
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Indivdual Compressive strength - (v))	-	1600	1600 for Compressive Strength Test.
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (ii))	-	4800	4800 for Flexural Strength/Breaking Load Test.
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (iii))	-	4800	4800 for Flexural Strength/Breaking Load Test.
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (ii))	-	2400	2400 for Tensile Splitting Strength/Failure load per unit length test.
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (iii))	-	2400	2400 for Tensile Splitting Strength/Failure load per unit length test.

19 Sep, 2028

-
Exclusion: Freeze Thaw durability

Bureau of Indian Standards

The National Standards Body of India

Accumetrix Testing Solutions Pvt. Ltd.

NEW VEENA VALLEY, SALWARA, HOSHIARPUR, Hoshiarpur, Punjab, 146001

8465000026 accumetrixtestingsolutions@gmail.com

Scope List