BIS - LIMS (Laboratory Information Management System)

Global Scientific Solutions (P) Ltd.

Plot no. 37, Pocket-N, Sec-2, DSIIDC Indl. Complex, Bawana, New Delhi-110039, Delhi, North, Delhi, 110039

8920965487 director@gsspllabs.com

Scope List

Reset

10 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

Their rated voltage being not more than 250 V for single phase appliances and 480 V for other appliances.

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32.0(Radiation, Toxicity and Similar Hazards)	-	500	-
31.0(Resistance To Rusting)	-	500	-
30.0(Resistance To Heat and Fire)	-	2000	-
29.0(Creepage Distances and Clearances)	-	1000	-
28.0(Screws and Connections)	-	1000	-
27.0(Provision For Earthing)	-	1000	-
26.0(Terminals for external conductors)	-	1000	-
25.0(Supply Connection and External Flexible Cords)	-	1000	-
24.0(Components)	-	1000	-
23.0(Internal Wiring)	-	1000	-
22.0(Construction)	-	1000	-
21.0(Mechanical Strength)	-	1000	-
20.0(Stability and mechanical hazards)	-	1000	-
19.0(Abnormal Operation)	-	1000	-
17.0(Overload Protection of transformer and associated circuit)	-	1000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	2000	-
15.0(Moisture resistance)	-	2000	-
14.0(Transient Overvoltage)	-	1000	-
13.0(Leakage Current and electric strength at operating temperature)	-	2000	-
11.0(Heating)	-	1000	-
10.0(Input and Current)	-	1000	-
8.0(Protection against access to live parts)	-	1000	-
7.0(Classification)	-	1000	-
6.0(Marking and Instructions)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(GENERAL REQUIREMENT)	-	500	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-

31 Oct, 2028

-
Cl. 19.11.4.1 to Cl. 19.11.4.7 (EMI/EMC), Cl. 32.2 as per IS 302-1

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.6 of IS 302-2-35:2017(Classification)	-	1000	-
Cl.6 of IS 302-2-35:2017(Classification)	-	1000	-
Cl.24 of IS 302-2-35:2017(Component )	-	1000	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	1000	-
Cl.10 of IS 302-2- 35:2011(Power Input & Current )	-	1000	-
Cl.11 of 302-2-35:2017(Heating)	-	1000	-
Cl.11 of 302-2-35:2017(Heating)	-	1000	-
Cl.11 of 302-2-35:2017(Heating)	-	1000	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test )	-	1000	-
Cl.11 of 302-2-35:2017(Heating)	-	1000	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	2000	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	2000	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	2000	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	2000	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	2000	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	2000	-
Cl.17 IS 302-2-35:2017(Overload Protection of Transformers & Associated circuits )	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	1000	-
Cl.20 of IS 302-2-35-2011(Stability & Mechanical Hazards )	-	1000	-
Cl.21.1 of IS 302-2-35-2011(Mechanical strength)	-	1000	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength)	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	1000	-
Cl.24 of IS 302-2-35:2017(Component )	-	1000	-
Cl.24 of IS 302-2-35:2017(Component )	-	1000	-
Cl.24 of IS 302-2-35:2017(Component )	-	1000	-
Cl.24 of IS 302-2-35:2017(Component )	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	1000	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	1000	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	1000	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	1000	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	1000	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	1000	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	1000	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	1000	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	1000	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	1000	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	1000	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	1000	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	1000	-
Cl.31 of IS 302-2-35: 2011(Resistance to Rusting )	-	1000	-
Cl.32 of IS 302-2-35: 2011(Radiation, Toxicity and Similar Hazards )	-	1000	-
Cl.10 of IS 8978 : 1992(Finish)	-	1000	-
Cl.11 of IS 8978 : 1992(Operation of flow switch)	-	1000	-
Cl.12 of IS 8978 : 1992(Endurance)	-	1000	-
Cl.12 of IS 8978 : 1992(Endurance)	-	1000	-
Cl.10 of IS 8978 : 1992(Finish)	-	1000	-
Cl.31 of IS 302-2-35: 2017(Resistance to Rusting )	-	1000	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat and Fire)	-	1000	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat and Fire)	-	1000	-
Cl.29.2 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	1000	-
Cl.29.1 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	1000	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	1000	-
Cl.27.5 of IS 302-2-35:2017(Provision for Earthing : ECR )	-	1000	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	1000	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.25.18 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	1000	-
Cl.25.12 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	1000	-
Cl.25.10 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	1000	-
Cl.25.8 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	1000	-
Cl.25.5 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Type of attachment )	-	1000	-
Cl.25.1 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : connection to the supply mains)	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.24 of IS 302-2-35:2017(Component )	-	1000	-
Cl.23 of IS 302-2-35:2017(Internal Wiring ; Colour of earthing conductor)	-	1000	-
Cl.23 of IS 302-2-35:2017(Internal Wiring)	-	1000	-
Cl.22.110 of IS 302-2-35:2017(Construction : Provision for fixing to wall )	-	1000	-
Cl.22.109 of IS 302-2-35:2017(Construction : Operation of presure switch of open outlet water heater )	-	1000	-
Cl.22.108 of IS 302-2-35:2017(Construction : Temperature of outlet water intended to supply for showring )	-	1000	-
Cl.22.107 of IS 302-2-35:2017(Construction : Temperature of outlet )	-	1000	-
Cl.22.106 of IS 302-2-35:2017(Construction : Operation of thermal cut out for closed water heater )	-	1000	-
Cl.22.104 of IS 302-2-35:2017(Construction : Pressure in open outlet water heaters )	-	1000	-
Cl.22.103 of IS 302-2-35:2017(Construction : Pressure relief device operation for closed water heater )	-	1000	-
Cl.22.102 of IS 302-2-35:2017(Construction : excessive temperature of outlet )	-	1000	-
Cl.22.101 of IS 302-2-35:2017(Construction : Rated pressure of closed water heater )	-	1000	-
Cl.22.47 of IS 302-2-35:2017(Construction : Water pressure test )	-	1000	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration )	-	1000	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	1000	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	1000	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	1000	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	1000	-
Cl.22.14 of IS 302-1:2008(Construction : Ragged or sharp edges )	-	1000	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts )	-	1000	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	1000	-
Cl.22.7 of IS 302-1:2008(Construction : safeguards against the risk of excessive pressure. )	-	1000	-
Cl.22.6 of IS 302-2-35:2017(Construction : size of drain hole )	-	1000	-
Cl.22.6 of IS 302-1:2008(Construction : effect of water on 3 insulation )	-	1000	-
Cl.22.2 of IS 302-1:2008(Construction : connection to supply mains )	-	1000	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	1000	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	1000	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	1000	-
Cl.20 of IS 302-2-35:2017(Stability & Mechanical Hazards )	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : effect on container)	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : High voltage)	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of insulation of supply cord)	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of test corner)	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Emission of flames, molten metal ,or poisonous or ignitable gas)	-	1000	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	1000	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	1000	-
Cl.15 of IS 302-2-35:2017(Moisture Resistance )	-	1000	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	1000	-
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature : High voltage )	-	1000	-
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature )	-	1000	-
Cl.11 of 302-2-35:2017(Heating : room temperature)	-	1000	-
Cl.11 of 302-2-35:2017(Heating : Insulation of supply cord)	-	1000	-
Cl.11 of 302-2-35:2017(Heating : Temperature rise of test corner)	-	1000	-
Cl.10 of IS 302-2- 35:2017(Power Input & Current )	-	1000	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	1000	-
Cl.7.102 of IS 302-2-35:2017(Marking : Standard mark)	-	1000	-
Cl.7.101 of IS 302-2-35:2017(Marking : Woter inlet and outlet idetification)	-	1000	-
Cl.7.15 of IS 302-1:2008(Marking : Position of marking)	-	1000	-
Cl.7.14 of IS 302-1:2008(Marking ; Legibility and durability)	-	1000	-
Cl.7.13 of IS 302-1:2008(Marking : Language)	-	1000	-
Cl.7.10 & 7.11 of IS 302-1:2008(Marking : Indication for direction of control)	-	1000	-
Cl.7.8 of IS 302-1:2008(Marking : Terminal for connection )	-	1000	-
Cl.7.6 of IS 302-1:2008(Marking : Symbols)	-	1000	-
Cl.7.1 of IS 302-2-35:2017(Marking : rated pressure)	-	1000	-
Cl.7.1 of IS 302-1:2008(Marking : Country of manufacture)	-	1000	-
Cl.7.1 of IS 302-1:2008(Marking : IP number )	-	1000	-
Cl.7.1 of IS 302-1:2008(Marking : Symbol for class II)	-	1000	-
Cl.7.1 of IS 302-1:2008(Marking : Molel or type)	-	1000	-
Cl.7.1 of IS 302-1:2008(Marking : Manufacture identification)	-	1000	-
Cl.7.1 of IS 302-1:2008(Marking : Rated power input)	-	1000	-
Cl.7.1 of IS 302-1:2008(Marking : Nature of supply)	-	1000	-
Cl.7.1 of IS 302-1:2008(Marking : Rated Voltage)	-	1000	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL NOTE ON TEST)	-	1000	-
Cl-19.11.4.1(Electrostatic discharge)	-	0	-
Cl-19.11.4.2(Radiated Fields)	-	0	-
Cl-19.11.4.3(Fast transient bursts)	-	0	-
Cl-19.11.4.4(Surge Immunity test)	-	0	-
Cl-19.11.4.5(Immunity to conducted discharge)	-	0	-
Cl-19.11.4.6(Voltage dips and interruptions)	-	0	-
Cl-19.11.4.7(Harmonics)	-	0	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
(Cl.7.1 of IS 302-2-35:2017)(Marking)	-	1000	-
(Cl.7.101 of IS 302-2-35:2017)(Marking)	-	1000	-
(Cl.8.1.1 of IS 8978:1992)(Marking)	-	1000	-
(Cl.19.13 of IS 302-2-35:2017)(Abnormal operation)	-	1000	-
(Cl.19.13 of IS 302-2-35:2017)(Abnormal operation)	-	1000	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	1000	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	1000	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	1000	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	1000	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	1000	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	1000	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	1000	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	1000	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	1000	-
(Cl.22 of IS 302-2-35:2017)(Construction)	-	1000	-
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	1000	-
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	1000	-
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	1000	-
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	1000	-
(Cl.24 of IS 302-2-35:2017)(Components)	-	1000	-
(Cl.24 of IS 302-2-35:2017)(Components)	-	1000	-
(Cl.24 of IS 302-2-35:2017)(Components)	-	1000	-
(Cl.24 of IS 302-2-35:2017)(Components)	-	1000	-
(Cl.24 of IS 302-2-35:2017)(Components)	-	1000	-
(Cl.25.8 of IS 302-2-35:2017)(Supply Connection and External Flexible cords)	-	1000	-
(CL.27.5 of IS 302-2-35:2017)(Provision for Earthing)	-	1000	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	1000	-

31 Oct, 2028

-
Cl. 19.11.4.1 to Cl. 19.11.4.7 (EMI/EMC), Cl. 24, Cl. 32.2, Cl. 15.1.1(IPX7-8), Cl 12 as per IS 302-2-35

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

Covers electric motor-driven food-mixers (grinders and liquidizers) and centrifugal juicers intended for household and similar use and designed for operation at voltages not exceeding 250 V a.c.

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	1000	-
Cl-5(General Conditions for the tests)	-	1000	-
Cl-6(Classification)	-	1000	-
Cl-7(Marking)	-	1000	-
Cl-8(Safety Requirements)	-	15000	-
Cl-9(Endurance fpr motor and base assembly)	-	2000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	2000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	2000	-
Cl-10.5(Operational Tests for Juicers)	-	2000	-
Cl-11(Temperature Withstand Test for Bowl)	-	1000	-
Cl-12.1(Test for Switches)	-	1000	-
Cl-13(Strength of Assembly)	-	1000	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	1000	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	1000	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	2000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	2000	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1000	-
Cl-19.11.4.1(Electrostatic discharges)	-	0	-
Cl-19.11.4.2(Radiated fields)	-	0	-
Cl-19.11.4.3(Fast transient bursts)	-	0	-
Cl-19.11.4.4(Surge immunity test)	-	0	-
Cl-19.11.4.5(Immunity to conducted discharges)	-	0	-
Cl-19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
Cl-19.11.4.7(Harmonics)	-	0	-
Cl-10.4(Idli Batter)	-	1000	-

31 Oct, 2028

-
Cl. 19.11.4.1 to Cl. 19.11.4.7 (EMI/EMC), Cl. 24, Cl. 32.2, Cl. 15.1.1(IPX7-8), Cl 12 as per IS 302-2-14

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

Rated voltage being not more than 250 V for single phase appliances and 480V for other appliances including direct current (DC) supplied appliances and battery-operated appliances.

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	2000	-
6(Classification- IS 302-1)	-	1000	-
5(General conditions for the tests)	-	1000	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	1000	-
18(Endurance)	-	3000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	2000	-
4(General requirement)	-	1000	-
32.1(Radiation Toxicity and Similar Hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	2000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
26(Terminals for external conductors)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
24(Components)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
22.1(Construction, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
19(Abnormal Operation)	-	2000	-
18(Endurance)	-	3000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	2000	-
16.2(Leakage Current (after Clause 15))	-	2000	-
16.1(General)	-	1000	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	2000	-
15.2(Spillage Test)	-	2000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	2000	-
15.0(Moisture resistance)	-	2000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	1000	-
11.1(General)	-	1000	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	1000	-
A.2(Earth continuity test)	-	1000	-
Annex C(Ageing test on motors)	-	2000	-
Annex D(Thermal motor protectors)	-	2000	-
15.2(Moisture resistance)	-	2000	-
19.17(Abnormal Operation, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.3(Mechanical Strength, IS 302-1)	-	1000	-
22.5(Construction)	-	1000	-
22.6(Construction, IS 302-1)	-	1000	-
22.11(Construction, IS 302-1)	-	1000	-
22.16(Construction)	-	1000	-
22.32(Construction, IS 302-1)	-	1000	-
22.42(Construction)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.5(Terminals for external conductors)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28.1(Screws and connections)	-	1000	-
22.2(Construction, IS 302-1)	-	1000	-
22.3(Construction, IS 302-1)	-	1000	-
B.22.4(Construction, IS 302-1)	-	1000	-
B.22.5(Construction, IS 302-1)	-	1000	-

31 Oct, 2028

-
Cl. 19.11.4.1 to Cl. 19.11.4.7 (EMI/EMC), Cl. 24, Cl. 32.2, Cl. 15.1.1(IPX7-8), Cl 12

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

Rated voltage being not more than 250 V.

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	1000	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl. 12 of IS 368:2014(Operation under overload conditions of appliances with heating elements)	-	1000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
Cl.13 of IS 302-2-201: 2009(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	2000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	2000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	2000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	2000	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	1000	-
Cl.18 of IS 368:2014(Endurance)	-	2000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	1000	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(GENERAL REQUIREMENT)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-

31 Oct, 2028

-
Cl. 19.11.4.1 to Cl. 19.11.4.7 (EMI/EMC), Cl. 24, Cl. 32.2, Cl. 15.1.1(IPX7-8), Cl 12 as per IS 302-2-201

IS 366 (1991)

Electric iron - Specification (Fourth Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.1 of IS 302-1))	-	500	-
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.2 of IS 302-1))	-	500	-
9.0(Protection against access to live parts (as per Cl. 8 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Power input and current (as per Cl. 10 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Transient Overvoltage (as per of Cl. 14 of IS 302-2-3 and Table 6 of IS 302-1))	-	1000	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	2000	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	2000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Staibilty and mechanical hazards (as per of Cl.20 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Mechanical strength (as per of Cl.21 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Components (as per of Cl.24 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Terminals for external conductors (as per of Cl.26 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Resistance to Heat and Fire (as per of Cl.30 of IS 302-2-3 and IS 302-1))	-	2000	-
9.0(Resistance to Rusting (as per of Cl.31 of IS 302-2-3 and IS 302-1))	-	1000	-
10.0(Measurement of Heating up time)	-	1000	-
10.0(Measurement of Heating up time)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
12.0(Measurement of Tempearture Distribution)	-	1000	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	1000	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.1 of IS 302-1))	-	1000	-
9.0(Protection against access to live parts (as per Cl. 8 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Power input and current (as per Cl. 10 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	2000	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	2000	-
9.0(Transient Overvoltage (as per of Cl. 14 of IS 302-2-3 and Table 6 of IS 302-1))	-	1000	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Staibilty and mechanical hazards (as per of Cl.20 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Mechanical strength (as per of Cl.21 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Components (as per of Cl.24 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Terminals for external conductors (as per of Cl.26 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Resistance to Heat and Fire (as per of Cl.30 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Resistance to Rusting (as per of Cl.31 of IS 302-2-3 and IS 302-1))	-	1000	-
10.0(Measurement of Heating up time)	-	1000	-
10.0(Measurement of Heating up time)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
12.0(Measurement of Tempearture Distribution)	-	1000	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	1000	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	1000	-
14.0(Measurement of Cyclic fluctuation of temperature of hottest point )	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
6(Measurement of Thermostatic staibility)	-	1000	-
15(MEASUREMENT OF TEMPERATURE DROP UNDER LOAD)	-	1000	-
17(Measurement of Thermostatic staibility)	-	1000	-
16 of IS 302-2-3(Leakage current electric strength)	-	1000	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL NOTES ON TESTS)	-	1000	-
8(Marking)	-	1000	-
(Cl.8 of IS 366:1991 )(Marking and Instructions)	-	1000	-
(Cl.8 of IS 366:1991 )(Marking and Instructions)	-	1000	-
(Cl.8 of IS 366:1991 )(Marking and Instructions)	-	1000	-
(Cl.8 of IS 366:1991 )(Marking and Instructions)	-	1000	-
(Cl.11 of IS 302-2-3 :2007)(Heating)	-	1000	-
(Cl.22 of IS 302-2-3 :2007)(Construction)	-	1000	-
(Cl.22 of IS 302-2-3 :2007)(Construction)	-	1000	-
(Cl.32 of IS 302-2-3 :2007)(Radiation, Toxicity and similar)	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
14.0(Measurement of Cyclic fluctuation of temperature of hottest point )	-	1000	-
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.2 of IS 302-1))	-	1000	-

31 Oct, 2028

-
Cl. 19.11.4.1 to Cl. 19.11.4.7 (EMI/EMC), Cl. 24, Cl. 32.2, Cl. 15.1.1(IPX7-8), Cl 12 as per IS 302-2-3, Steam Iron

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
7(Marking)	-	1000	-
6(Classification )	-	500	-
6(Classification )	-	500	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	1000	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	1000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	1000	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	1000	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	1000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	2000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	2000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	2000	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	1000	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.24ofIS302-221:2011)(Component)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	1000	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	1000	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	1000	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1000	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1000	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	1000	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	1000	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	2000	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	1000	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	1000	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	1000	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	1000	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1000	-
(Cl.22 of IS 2082:2018)(Finish)	-	500	-
Cl.22 of IS 2082:2018(Finish)	-	500	-
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	1000	-
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	1000	-
Cl.19 of IS 2082:2018(Mixing Factor)	-	1000	-
Cl.18 of IS 2082:2018( Reheating Time)	-	1000	-
Cl.17 of IS 2082:2018(Hot Water Output)	-	1000	-
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	2000	-
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	1000	-
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	1000	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	1000	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	1000	-
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	1000	-
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	1000	-
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	1000	-
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	1000	-
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	1000	-
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	1000	-
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	1000	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	1000	-
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	1000	-
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	1000	-
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	1000	-
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	1000	-
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	1000	-
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	1000	-
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	1000	-
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	1000	-
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	1000	-
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	1000	-
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	1000	-
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	1000	-
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	1000	-
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	1000	-
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	1000	-
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	1000	-
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	1000	-
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	1000	-
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	1000	-
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	1000	-
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	1000	-
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	1000	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	1000	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	1000	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	1000	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	1000	-
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	1000	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	1000	-
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	1000	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	1000	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	1000	-
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	1000	-
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	1000	-
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	1000	-
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	1000	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	1000	-
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	1000	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	1000	-
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	1000	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	2000	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	2000	-
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	2000	-
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	1000	-
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	1000	-
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	1000	-
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	1000	-
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	1000	-
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	1000	-
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	1000	-
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	1000	-
7.101(Marking : Indifiction of water inlet and water outlet )	-	1000	-
7.14(Marking : Legibility and durability)	-	1000	-
7.13(Marking : Official language of Instruction )	-	1000	-
7.11(Marking : Indication of controls )	-	1000	-
7.8(Marking : Terminals )	-	1000	-
7.6(Marking : Symbol used )	-	1000	-
7.1(Marking : Warning for Open- outlet )	-	1000	-
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	1000	-
7.1(Marking : Statement for a pressure-relief device)	-	1000	-
7.1(Marking : Rated capacity)	-	1000	-
7.1(Marking : Rated pressure)	-	1000	-
7.1(Marking : Country of manufacture)	-	1000	-
7.1(Marking: IP Number)	-	1000	-
7.1(Marking: Symbol for Class II)	-	1000	-
7.1(Marking: Model or type reference)	-	1000	-
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	1000	-
7.1(Marking : Rated power input)	-	1000	-
7.1(Marking : Symbol for nature of supply )	-	1000	-
7.1(Marking : Rated Voltage )	-	1000	-
Cl.32 of IS 302-1:2008()	-	1000	-
4(GENERAL REQUIREMENT)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
12(THERMOSTAT SETTING)	-	1000	-
Cl-10(Mounting of the water heater)	-	1000	-
Cl-11(Measurements of stored water temperature)	-	1000	-
Cl-12(Thermostat setting)	-	1000	-
Cl-13(Measurement of energy consumption)	-	1000	-
Cl-14(Verification of the rated capacity)	-	1000	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.108 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.6 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.103 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.22.109 of IS 302-2-21:2018)(Constructions)	-	1000	-
(Cl.24.101 of IS 302-2-21:2018)(Components)	-	1000	-
(Cl.25 of IS 302-2-21:2018)(Supply Connection and External Flexible cords)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge Immunity Test)	-	0	-
19.11.4.5(Immunity to conductivity Discharge)	-	0	-
19.11.4.6(Class 3 voltage dips and interruptions)	-	0	-
19.11.4.7(Hormonics)	-	0	-

31 Oct, 2028

-
Cl. 19.11.4.1 to Cl. 19.11.4.7 (EMI/EMC), Cl. 24, Cl. 32.2, Cl. 15.1.1(IPX7-8), Cl 12 as per IS 302-2-21

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	1000	-
8.1,a(Marking )	-	1000	-
8.1,b(Marking )	-	1000	-
8.1,c(Marking )	-	1000	-
8.1,d(Marking )	-	1000	-
8.1,e(Marking )	-	1000	-
8.1,f(Marking )	-	1000	-
8.1,g(Marking )	-	1000	-
8.2(Marking )	-	1000	-
8.3,a(Marking )	-	1000	-
8.3,b(Marking )	-	1000	-
8.3,c(Marking )	-	1000	-
8.3,d(Marking )	-	1000	-
8.3,e(Marking )	-	1000	-
8.4(Marking )	-	1000	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	1000	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	1000	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	1000	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	1000	-
6.2(Rating)	-	500	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	1000	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	2000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	2000	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	1000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	2000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	2000	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	1000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	1000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	1000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	1000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	1000	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	1000	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	1000	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	1000	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	1000	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	1000	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	2000	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	1000	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	1000	-
10.1(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.3(Speed Regulators)	-	1000	-
10.4(Speed Regulators)	-	1000	-
10.5(Speed Regulators)	-	1000	-
10.6(Speed Regulators)	-	1000	-
10.7(Speed Regulators)	-	1000	-
10.7(Speed Regulators)	-	1000	-
10.8(Speed Regulators)	-	1000	-
11.1(Starting)	-	1000	-
11.2(Starting)	-	1000	-
12(Interchangeability)	-	1000	-
13(Silent Operation)	-	1000	-
14.3 & Table 1(Test for Air Performance)	-	2000	-
14.3 & Table 1(Test for Air Performance)	-	2000	-
14.4(Measurement of Speed of the Fan )	-	1000	-
14.5(Measurement of Power factor and Power Input)	-	1000	-
14.5(Measurement of Power factor and Power Input)	-	1000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
17(Test for Harmonic Distortion)	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	1000	-
8.1,a(Marking )	-	1000	-
8.1,b(Marking )	-	1000	-
8.1,c(Marking )	-	1000	-
8.1,d(Marking )	-	1000	-
8.1,e(Marking )	-	1000	-
8.1,f(Marking )	-	1000	-
8.1,g(Marking )	-	1000	-
8.2(Marking )	-	1000	-
8.3(Marking )	-	1000	-
8.3,a(Marking )	-	1000	-
8.3,b(Marking )	-	1000	-
8.3,c(Marking )	-	1000	-
8.3,d(Marking )	-	1000	-
8.3,e(Marking )	-	1000	-
8.4(Marking )	-	1000	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	1000	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	1000	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	1000	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	1000	-
6.2(Rating)	-	1000	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	1000	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	2000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	2000	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	1000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	2000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	2000	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	1000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	1000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	1000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	1000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	1000	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	1000	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	1000	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	1000	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	1000	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	1000	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	2000	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	1000	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	1000	-
10.1(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.3(Speed Regulators)	-	1000	-
10.4(Speed Regulators)	-	1000	-
10.5(Speed Regulators)	-	1000	-
10.6(Speed Regulators)	-	1000	-
10.7(Speed Regulators)	-	1000	-
10.7(Speed Regulators)	-	1000	-
10.8(Speed Regulators)	-	1000	-
11.1(Starting)	-	1000	-
11.2(Starting)	-	1000	-
12(Interchangeability)	-	1000	-
13(Silent Operation)	-	1000	-
14.3 & Table 1(Test for Air Performance)	-	2000	-
14.3 & Table 1(Test for Air Performance)	-	2000	-
14.4(Measurement of Speed of the Fan )	-	1000	-
14.4(Measurement of Speed of the Fan )	-	1000	-
14.5(Measurement of Power factor and Power Input)	-	1000	-
14.5(Measurement of Power factor and Power Input)	-	1000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
17(Test for Harmonic Distortion)	-	1000	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL NOTES ON TESTS)	-	1000	-
15.1, 15.2(Air delivery and service value)	-	2000	-
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	0	-
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	0	-
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	0	-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	0	-
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	0	-
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	0	-
Cl-9 (Cl-19.11.4.7 of IS 302-1)(Harmonics)	-	0	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	1000	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	1000	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	1000	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	1000	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	1000	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	1000	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	1000	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	1000	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	1000	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	1000	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	1000	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	1000	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	1000	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	1000	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	1000	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	1000	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	1000	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	1000	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	1000	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	1000	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	1000	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	1000	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	1000	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	2000	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	2000	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	1000	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	1000	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	1000	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	2000	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	2000	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	2000	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	1000	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	1000	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	1000	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	1000	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	1000	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	1000	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	1000	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	1000	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	1000	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	1000	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	1000	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	1000	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	1000	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	1000	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	1000	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	1000	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	1000	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	1000	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	1000	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	1000	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	1000	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	1000	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	1000	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	1000	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	1000	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	1000	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	1000	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	1000	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	1000	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	1000	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	1000	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	1000	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	1000	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	1000	-
14.4(Measurement of Speed of the Fan )	-	1000	-

31 Oct, 2028

-
Cl. 19.11.4.1 to Cl. 19.11.4.7 (EMI/EMC), Cl. 24, Cl. 32.2, Cl. 15.1.1(IPX7-8), Cl 12 as per IS 302-2-80, Cl. 10.7

IS 3315 (2024)

Direct Evaporative Air Cooler â Specification (Fourth Revision)

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Enclosure)	-	1000	-
Cl-5.2(Filter Pads)	-	1000	-
Cl-5.3(Sump Tank Capacities)	-	1000	-
Cl-5.4(Blower/Fan)	-	1000	-
Cl-5.4.3(Fan motor)	-	1000	-
Cl-5.5(Pump Set)	-	1000	-
Cl-5.6.1(Electrical wiring and connection)	-	1000	-
Cl-5.6.2(Suitable power cable)	-	2000	-
Cl-5.7(Switches)	-	2000	-
Cl-6(Rating Requirement)	-	1000	-
Cl-8.1(Performance Requirement)	-	40000	-
Cl-8.2(Sound Test)	-	10000	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	20000	-
Cl-8.4(Cooling Efficiency Test)	-	20000	-
Cl-8.5(Power Consumption)	-	5000	-
Cl-8.6(EER Calculation Method)	-	20000	-
Cl-8.7(Drop Test)	-	5000	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	5000	-
Cl-12.2.1(General Running Tests)	-	1000	-
Cl-12.2.2(Protection against Electric Shock)	-	1000	-
Cl-12.2.3(High Voltage Tests)	-	1000	-
Cl-12.2.4(Leakage Current)	-	1000	-
Cl-12.2.5(Provision for Earthing)	-	1000	-
Cl-12.2.6(Finish)	-	1000	-
Cl-13(Additional Requirement for ECO-Mark)	-	1000	-
Cl-14(Storage)	-	1000	-

31 Oct, 2028

-
-

IS 996 (2009)

Single phase a.c. induction motors for general purpose (Third Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
10(Type of enclosures)	-	1000	-
11(Methods of cooling)	-	1000	-
9.1(General construction (as per Cl. 9 & F-3))	-	1000	-
9(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1000	-
9(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	1000	-
4.1(Rated Voltage)	-	1000	-
4.2(Rated Frequency)	-	1000	-
4.3(Rated Output)	-	1000	-
4.4(Rated Speed)	-	1000	-
7(Dimensions (Cl.App.F-4))	-	1000	-
9.5(Earthing)	-	1000	-
9.5(Earthing)	-	1000	-
9.5(Earthing)	-	1000	-
17.3 (a)(No load test at rated voltage and frequency )	-	1000	-
17.3 (a)(No load test at rated voltage and frequency)	-	1000	-
17.3 (a)(No load test at rated voltage and frequency)	-	1000	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1000	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1000	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1000	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	2000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	2000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	2000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	2000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	2000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	2000	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1000	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1000	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1000	-
12.7(Insulation resistance test)	-	1000	-
13.1(High voltage test)	-	1000	-
13.2(Moisture proofness)	-	2000	-
13.2(Moisture proofness)	-	2000	-
13.3(Leakage current test)	-	1000	-
12.6(Vibration Severity)	-	2000	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	2000	-
15.1.5(Noise Level)	-	1000	-
15.2(Specific Requirements)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
10(Type of enclosures)	-	1000	-
11(Methods of cooling)	-	1000	-
9.1(General construction (as per Cl. 9 & F-3))	-	1000	-
9(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1000	-
9(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	1000	-
4.1(Rated Voltage)	-	1000	-
4.2(Rated Frequency)	-	1000	-
4.3(Rated Output)	-	1000	-
4.4(Rated Speed)	-	1000	-
9.5(Earthing)	-	1000	-
9.5(Earthing)	-	1000	-
9.5(Earthing)	-	1000	-
17.3 (a)(No load test at rated voltage and frequency )	-	1000	-
17.3 (a)(No load test at rated voltage and frequency)	-	1000	-
17.3 (a)(No load test at rated voltage and frequency)	-	1000	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1000	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1000	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1000	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	1000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1000	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1000	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1000	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1000	-
12.7(Insulation resistance test)	-	1000	-
13.1(High voltage test)	-	1000	-
13.2(Moisture proofness)	-	1000	-
13.2(Moisture proofness)	-	1000	-
13.3(Leakage current test)	-	1000	-
12.6(Vibration Severity)	-	2000	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	1000	-
15.1.5(Noise Level)	-	1000	-
15.2(Specific Requirements)	-	1000	-
9.0(Observation)	-	1000	-
7.2(Dimensions)	-	1000	-
11.0(Observation)	-	1000	-
17.3 (j)(Observation)	-	1000	-
9.5(Observation)	-	1000	-
14.0(Observation)	-	1000	-
16.0(Observation)	-	1000	-
17.4 & 9.4.6.1(Observation)	-	1000	-
17.3 (k)(Current)	-	1000	-
17.3 (m)(Vibration)	-	2000	-
17.3 (g)(Insulation Resistance)	-	1000	-
17.3 (h)(Voltage)	-	1000	-
17.3 (b)(Temperature)	-	1000	-
17.3 (e)(Temperature)	-	1000	-
17.3 (f)(Torque)	-	1000	-
17.3 (c)(Current, Torque)	-	1000	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	1000	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	1000	-
14(Terminal marking)	-	1000	-
12.1.2(Momentary overload for motors)	-	1000	-
16(Observation)	-	1000	-
14(Observation)	-	1000	-
9.5(Observation)	-	1000	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	1000	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	1000	-
17.3 (c)(Current, Torque)	-	1000	-
17.3 (f)(Torque)	-	1000	-
17.3 (e)(Temperature)	-	1000	-
17.3 (b)(Temperature)	-	1000	-
17.3 (h)(Voltage)	-	1000	-
17.3 (g)(Insulation Resistance)	-	1000	-
17.3 (m)(Vibration)	-	2000	-
17.3 (j)(Observation)	-	1000	-
17.3 (k)(Current)	-	1000	-
11(Observation)	-	1000	-
17.4 & 9.4.6.1(Observation)	-	1000	-
7.2(Dimensions)	-	1000	-
9(Observation)	-	1000	-
16(Observation)	-	1000	-
14(Observation)	-	1000	-
9.5(Observation)	-	1000	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	1000	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	1000	-
17.3 (c)(Current, Torque)	-	1000	-
17.3 (f)(Torque)	-	1000	-
17.3 (e)(Temperature)	-	1000	-
17.3 (b)(Temperature)	-	1000	-
17.3 (h)(Voltage)	-	1000	-
17.3 (g)(Insulation Resistance)	-	1000	-
17.3 (m)(Vibration)	-	2000	-
17.3 (j)(Observation)	-	1000	-
17.3 (k)(Current)	-	1000	-
11(Observation)	-	1000	-
17.4 & 9.4.6.1(Observation)	-	1000	-
7.2(Dimensions)	-	1000	-
9(Observation)	-	1000	-

31 Oct, 2028

-
Above 750W

Bureau of Indian Standards

The National Standards Body of India

Global Scientific Solutions (P) Ltd.

Plot no. 37, Pocket-N, Sec-2, DSIIDC Indl. Complex, Bawana, New Delhi-110039, Delhi, North, Delhi, 110039

8920965487 director@gsspllabs.com

Scope List