BIS - LIMS (Laboratory Information Management System)

NAYRA LABORATORIES (INDIA) LLP

G-974,DSIDC Industrial Area, Delhi, North West, Delhi, 110040

9891987394 nayralaboratories@gmail.com

Scope List

Reset

4 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.4(SHAPE AND DESIGN)	-	100	-
Cl. No.5("SIZE AND FITTINGS ")	-	200	-
Cl. No.6("CONSTRUCTION ")	-	100	-
Cl. No.7(MATERIAL)	-	300	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	500	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	500	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	1000	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	500	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	600	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	600	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	500	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	600	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	600	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	500	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	200	-
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	700	-
Cl. No.8.4,Table no. 5(i)(Density)	-	200	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	600	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	700	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	500	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	500	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	500	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	500	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	500	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	500	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	500	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	2100	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	600	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	500	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	1200	-
Cl. No.9.(MARKING AND PACKING)	-	300	-
Cl-5 ((Amendment No-1)(Category And Type)	-	300	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	500	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	500	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	2100	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	600	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	500	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	1200	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	600	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	700	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	1000	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	1200	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	600	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	500	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	200	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	700	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	200	-
Cl-10 (Amendment No-1)(Marking)	-	300	-

10 Sep, 2028

-
Exclusion: Cl. No.8. ("Requirement of Complete Sandal and Slipper (Chemical Requirements) ") Cl. No.8.6.1,Table 1 of IS 17011(i) (Allergenic and carcinogenic disperse dyes) Cl. No.8.6.1,Table 1 of IS 17011(ii) (Aromatic amines released from Azo dyes (each individual amine)) Cl. No.8.6.1,Table 1 of IS 17011(iii) (Aromatic amines released from Azo dyes (each individual amine)) Cl. No.8.6.1,Table 1 of IS 17011(iv) (Chromium (VI)) Cl. No.8.6.1,Table 1 of IS 17011(ix) (PCP-TeCP-TriCP polychlorophenols) Cl. No.8.6.1,Table 1 of IS 17011(v) (Dimethyl fumarate (DMFU)) Cl. No.8.6.1,Table 1 of IS 17011(vi) (Formaldehyde (free or released by partial hydrolysis)) Cl. No.8.6.1,Table 1 of IS 17011(vii) (Formaldehyde) Cl. No.8.6.1,Table 1 of IS 17011(viii) (Organotin compounds) Cl. No.8.6.1,Table 1 of IS 17011(x) (pH) Cl. No.8.6.1,Table 1 of IS 17011(xi) (Phthalates (each individual phthalate)) Cl. No.8.6.1,Table 1 of IS 17011(xii) (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB)) Cl. No.8.6.2 (Lead content) Cl.8 - Table No 1 - Sl. No.-xiv (pH- IS 1390:2022) Cl.8 - Table No 1 - Sl. No.-xv ("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988") Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1) (Chemical Requirements) Cl.8 Table-1 S.No 1, (xv) (Amendment No-1) (Lead content (as Pb)7 ppm)

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	200	-
Cl No.4.2(Construction)	-	200	-
Cl No.4.3(Whole Footwear)	-	200	-
4.3.1(Insole)	-	100	-
4.3.2(Toe spring height)	-	300	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	500	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	500	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	500	-
4.3.6(Energy Absorption at Seat Region)	-	800	-
4.3.7(Complete Shoe Flexing)	-	800	-
4.3.8(Washability)	-	800	-
4.3.9(Slip Resistance)	-	1200	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	500	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	500	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	500	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	500	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	800	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	800	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	500	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	500	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	500	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	500	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	500	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	800	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	800	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	2100	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	500	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	500	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	1200	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	500	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	500	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	800	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	800	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	200	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	800	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	800	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	800	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	800	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	200	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	1200	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	800	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	800	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	600	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	600	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	2100	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	500	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	500	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	800	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	800	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	800	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	800	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	800	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	800	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	500	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	500	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	600	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	800	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	600	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	600	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	600	-
Cl No . 5(MARKING AND PACKING)	-	200	-
Clause 4.2 - 4.2.1(Construction)	-	200	-
Clause 4.2 - 4.2.2(Construction)	-	200	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	200	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	300	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	500	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	500	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	500	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	800	-
Clause 4.4, Table 1 ii)(Tear strength)	-	500	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	800	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	800	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	500	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	500	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	500	-
Clause 4.4, Table 2 iii)(Tear strength)	-	500	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	800	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	800	-
Clause 4.5, Table 3 i)(Tear strength)	-	500	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	1200	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	800	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	800	-
Clause 4.6, Table 4 i)(Thickness)	-	200	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	800	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	800	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	800	-
Clause 4.7, Table 5 i)(Thickness)	-	200	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	1200	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	800	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	800	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	600	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	600	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	2100	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	500	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	800	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	200	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	300	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	500	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	800	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	800	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	800	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	1200	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	600	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	2100	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	500	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	500	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	800	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	800	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	500	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	500	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	500	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	500	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	1000	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	800	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	800	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	2100	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	500	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	1200	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	500	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	500	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	800	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	800	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	200	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	800	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	800	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	800	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	800	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	200	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	1200	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	800	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	800	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	600	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	2100	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	500	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	500	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	800	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	800	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	800	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	800	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	800	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	800	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	500	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	500	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	600	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	500	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	500	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	800	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	600	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	600	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	600	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	600	-

10 Sep, 2028

-
Exclusion: Cl No . 4.14 ("Chemical Requirement on Complete Product for all Types of Sports Shoe") Cl No . 4.14, Table no. 1 of IS 17011(i) (Allergenic and carcinogenic disperse dyes) Cl No . 4.14, Table no. 1 of IS 17011(ii) (Aromatic amines released from Azo dyes (each individual amine)) Cl No . 4.14, Table no. 1 of IS 17011(iii) (Aromatic amines released from Azo dyes (each individual amine)) Cl No . 4.14, Table no. 1 of IS 17011(iv) (Chromium (VI)) Cl No . 4.14, Table no. 1 of IS 17011(ix) (PCP-TeCP-TriCP polychlorophenols) Cl No . 4.14, Table no. 1 of IS 17011(v) (Dimethyl fumarate (DMFU)) Cl No . 4.14, Table no. 1 of IS 17011(vi) (Formaldehyde (free or released by partial hydrolysis)) Cl No . 4.14, Table no. 1 of IS 17011(vii) (Formaldehyde) Cl No . 4.14, Table no. 1 of IS 17011(viii) (Organotin compounds) Cl No . 4.14, Table no. 1 of IS 17011(x) (pH) Cl No . 4.14, Table no. 1 of IS 17011(xi) (Phthalates (each individual phthalate)) Cl No . 4.14, Table no. 1 of IS 17011(xii) (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB)) Cl No.4.4 , Table No. 2 , vi) ("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)") Cl-5, Table -1 S. No- (x) (Amendment No-1) (Chemical requirements) Cl-5, Table -1 S. No- (xii) (Amendment No-1) (Lead content) Cl-6, Table -2 S. No- (v),(Amendment No-1) (Colour fastness to light grey scale rate,)

IS 15844 : Part 2 (2023)

SPORTS FOOTWEAR PART -2 PERFORMANCE SPORTS FOOTWEAR

27000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(SAMPLING AND CONDITIONING)	-	200	-
5(DESIGN)	-	100	-
6(SIZE AND FITTINGS)	-	200	-
7.1.1(Whole Footwear)	-	200	-
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	500	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	500	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	500	-
7.1.5(Energy Absorption at Seat Region)	-	700	-
7.1.6(Complete Shoe Flexing)	-	800	-
7.1.7(Washability)	-	800	-
7.1.8(Slip Resistance)	-	1200	-
7.1.9(Heel Drop)	-	300	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	1000	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	500	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	500	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	800	-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	800	-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	500	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	500	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	500	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	500	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	1200	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	500	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	500	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	500	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	500	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	1000	-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	800	-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	800	-
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	1500	-
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	600	-
7.3 , Table No. 4 , i)(Tear strength,)	-	500	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	1200	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	500	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	600	-
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	800	-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	800	-
7.4 , Table No. 5 , i)(Thickness)	-	100	-
7.4 , Table No. 5 , ii)(Flexing index)	-	800	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	800	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	800	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	800	-
7.5 , Table No. 6 , i)(Thickness)	-	100	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	1200	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	800	-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	800	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	600	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	600	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	600	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	2100	-
7.6 , Table No. 7 , iv)(Tear strength)	-	500	-
7.6 , Table No. 7 , v)(Tensile strength)	-	500	-
7.6 , Table No. 7 , vi)(Elongation at break)	-	500	-
7.6 , Table No. 7 , vii)(Compression set)	-	600	-
7.7 , Table No. 8 , i)(Compression set)	-	600	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	500	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	600	-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	500	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	800	-
7.8 , Table No. 9 , ii)(Resilience)	-	800	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	800	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	800	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	800	-
7.8 , Table No. 9 , v)(Peel strength)	-	500	-
7.9 , Table No. 10 , i)(Peel strength)	-	700	-
7.9 , Table No. 10 , ii)(Shear strength)	-	700	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	500	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	500	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	500	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	500	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	800	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	600	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	500	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	500	-
8(MARKING AND PACKING)	-	300	-

10 Sep, 2028

-
Exclusion: 7.12 ("Chemical Requirement on Complete Product for All Types of Sports Shoe") 7.12, Table no. 1 of IS 17011,(i) (Allergenic and carcinogenic disperse dyes) 7.12, Table no. 1 of IS 17011,(ii) (Aromatic amines released from Azo dyes (each individual amine)) 7.12, Table no. 1 of IS 17011,(iii) (Aromatic amines released from Azo dyes (each individual amine)) 7.12, Table no. 1 of IS 17011,(iv) (Chromium (VI)) 7.12, Table no. 1 of IS 17011,(ix) (PCP-TeCP-TriCP polychlorophenols) 7.12, Table no. 1 of IS 17011,(v) (Dimethyl fumarate (DMFU)) 7.12, Table no. 1 of IS 17011,(vi) (Formaldehyde (free or released by partial hydrolysis)) 7.12, Table no. 1 of IS 17011,(vii) (Formaldehyde) 7.12, Table no. 1 of IS 17011,(viii) (Organotin compounds) 7.12, Table no. 1 of IS 17011,(x) (pH) 7.12, Table no. 1 of IS 17011,(xi) (Phthalates (each individual phthalate)) 7.12, Table no. 1 of IS 17011,(xii) (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB)) 7.12.2 (Amendment 1) (Lead content) 7.2 , Table No. 2 , vi) ("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)") 7.2 , Table No. 3 , viii) (Colour fastness to light grey scale rate)

IS 15844 : Part 3 (2024)

Sports Footwear Part 3 Professional Sports Footwear

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Size and Fittings)	-	300	-
Cl-5(Design)	-	200	-
Cl-6(Size and Fittings)	-	300	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	500	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	800	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	500	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	800	-
Cl.7.1.3(Complete Shoe Flexing)	-	800	-
Cl.7.1.4(Washability)	-	800	-
Cl.7.1.5(Slip Resistance)	-	1200	-
Cl.7.1.6(Heel Drop)	-	300	-
Cl.7.2 Table-2 S.No- (i)("Flexing resistance, Min a) Dry condition b) Wet condition")	-	1000	-
Cl.7.2 Table-2 S.No- (ii)(Tear strength (average force), N, Min)	-	500	-
Cl.7.2 Table-2 S.No- (iii)("Colour fastness rubbing a-Dry b-Wet")	-	500	-
Cl.7.2 Table-2 S.No- (iv)("a) Water vapour permeability b) Water vapour coefficient")	-	800	-
Cl.7.2 Table-2 S.No- (v)(Stitch tear strength N/mm, Min)	-	500	-
Cl.7.2 Table-2 S.No- (vii)(Tensile strength)	-	500	-
Cl.7.2 Table-2 S.No- (viii)(Elongation at break, percent)	-	500	-
Cl.7.2 Table-2 S.No- (ix)("Abrasion test a) Dry b) Wet")	-	1200	-
Cl.7.2 Table-3 S.No- (i)(Breaking strength, N/mm, Min)	-	500	-
Cl.7.2 Table-3 S.No- (ii)(Elongation at break, percent, Min)	-	500	-
Cl.7.2 Table-3 S.No- (iii)(Tear strength, N, Min)	-	500	-
Cl.7.2 Table-3 S.No- (iv)(Strength at needle perforation)	-	500	-
Cl.7.2 Table-3 S.No- (v)("Flexing resistance a-Dry condition, b) Wet condition")	-	1000	-
Cl.7.2 Table-3 S.No- (vi)("a) Water vapour permeability b) Water vapour coefficient")	-	800	-
Cl.7.2 Table-3 S.No- (vii)(Hydrolysis resistance)	-	1500	-
Cl.7.2 Table-3 S.No- (ix)(Bursting strength)	-	700	-
Cl.7.3 Table-4 S.No- (i)(Tear strength, N, Min)	-	500	-
Cl.7.3 Table-4 S.No- (ii)("Abrasion resistance, a) Dry b) Wet ")	-	1200	-
Cl.7.3 Table-4 S.No- (iii)(Colour fastness to rubbing, grey scale rate with 10 rubs on dry or wet, Min)	-	500	-
Cl.7.3 Table-4 S.No- (iv)(Colour fastness to perspiration (contact method) grey scale rate, Min)	-	600	-
Cl.7.3 Table-4 S.No- (v)("a-Water vapour permeability b-Water vapour coefficient")	-	800	-
Cl.7.4 Table-5 S.No- (i)(Flexing index, Min)	-	800	-
Cl.7.4 Table-5 S.No- (ii)(Abrasion resistance)	-	800	-
Cl.7.4 Table-5 S.No- (iii)("a) Water absorption b) Water desorption")	-	800	-
Cl.7.5 Table-6 S.No- (i)("Abrasion resistance a) Dry condition b) Wet condition")	-	1200	-
Cl.7.5 Table-6 S.No- (ii)("a) Water absorption b) Water desorption")	-	800	-
Cl.7.5 Table-6 S.No- (iii)(Heat resistance shrinkage linear, percent, Max)	-	500	-
Cl.7.6 Table-7 S.No- (i)(Abrasion resistance)	-	600	-
Cl.7.6 Table-7 S.No- (ii)("Flexing resistance a) Bennewart Method b) Ross flexing method")	-	600	-
Cl.7.6 Table-7 S.No- (iii)(Hydrolysis resistance)	-	2100	-
Cl.7.6 Table-7 S.No- (iv)(Tear strength, N/mm, Min)	-	500	-
Cl.7.6 Table-7 S.No- (v)(Tensile strength)	-	500	-
Cl.7.6 Table-7 S.No- (vi)(Elongation at break percent, Min)	-	500	-
Cl.7.6 Table-7 S.No- (vii)(Compression set percent, Max)	-	700	-
Cl.7.7 Table-8 S.No- (i)("Compression set, percent, Max a) For EVA b) For all other material")	-	700	-
Cl.7.7 Table-8 S.No- (ii)(Split tear strength)	-	500	-
Cl.7.7 Table-8 S.No- (iii)(Heat shrinkage, percent, Ma)	-	500	-
Cl.7.7 Table-8 S.No- (iii)(Elongation at break, percent, Min)	-	500	-
Cl.7.7 Table-8 S.No- (iv)(Elongation at break, percent, Min)	-	500	-
Cl.7.8 Table-9 S.No- (i)(First dry collapsing load, hardness, N, Min)	-	800	-
Cl.7.8 Table-9 S.No- (ii)(Resilience, percent, Min)	-	800	-
Cl.7.8 Table-9 S.No- (iii)(Moisture resistance, percent, Min)	-	800	-
Cl.7.8 Table-9 S.No- (iv)("a) Initial dry area shape retention, percent, Min b) Area shape retention after 10th collapse, dry, percent, Min ")	-	800	-
Cl.7.8 Table-9 S.No- (v)(Peel strength, N/nm, Min)	-	500	-
Cl.7.9 Table-10 S.No- (i)("Peel strength, N/mm, Min a) Initial b) After 5 000 wear cycles")	-	700	-
Cl.7.9 Table-10 S.No- (ii)("Shear strength, kPa, Min a) Initial b) After 5 000 wear cycles")	-	700	-
Cl.7.10 Table-11 S.No- (i)(Limit of useful extension, percent, Min)	-	500	-
Cl.7.10 Table-11 S.No- (ii)(Needle strength, N/mm, Min)	-	500	-
Cl.7.11 Table-12 S.No- (i)(Breaking strength of lace)	-	500	-
Cl.7.11 Table-12 S.No- (ii)(Lace tag strength)	-	500	-
Cl.7.11 Table-12 S.No- (iii)(Lace to lace abrasion)	-	800	-
Cl.7.11 Table-12 S.No- (iv)(Colour fastness to water (for lace) (Contact method))	-	600	-
Cl.7.11 Table-12 S.No- (v)(Strength of buckle/ski hook/D-ring,)	-	500	-
Cl.7.11 Table-12 S.No- (vi)("Corrosion resistance (applicable for all including decorative metal part) ")	-	500	-
Cl.7.11 Table-13 S.No- (i)(Corrosion resistance (applicable for metallic spikes))	-	500	-
Cl- 8.1(Marking)	-	200	-

10 Sep, 2028

-
Exclusion: C-7.12.1, Table no. 1 of IS 17011,(xii) (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB)) Cl.7.2 Table-2 S.No- (vi) (Colour fastness to light grey scale rate) Cl.7.2 Table-3 S.No- (viii) (Colour fastness to light grey scale rate) Cl-7.12.1, Table no. 1 of IS 17011,(i) (Allergenic and carcinogenic disperse dyes) Cl-7.12.1, Table no. 1 of IS 17011,(ii) (Aromatic amines released from Azo dyes (each individual amine)) Cl-7.12.1, Table no. 1 of IS 17011,(iii) (Aromatic amines released from Azo dyes (each individual amine)) Cl-7.12.1, Table no. 1 of IS 17011,(iv) (Chromium (VI)) Cl-7.12.1, Table no. 1 of IS 17011,(ix) (PCP-TeCP-TriCP polychlorophenols) Cl-7.12.1, Table no. 1 of IS 17011,(v) (Dimethyl fumarate (DMFU)) Cl-7.12.1, Table no. 1 of IS 17011,(vi) (Formaldehyde (free or released by partial hydrolysis)) Cl-7.12.1, Table no. 1 of IS 17011,(vii) (Formaldehyde) Cl-7.12.1, Table no. 1 of IS 17011,(viii) (Organotin compounds) Cl-7.12.1, Table no. 1 of IS 17011,(x) (pH) Cl-7.12.1, Table no. 1 of IS 17011,(xi) (Phthalates (each individual phthalate)) Cl-7.12.2 (PVC is present in sports shoe)

Bureau of Indian Standards

The National Standards Body of India

NAYRA LABORATORIES (INDIA) LLP

G-974,DSIDC Industrial Area, Delhi, North West, Delhi, 110040

9891987394 nayralaboratories@gmail.com

Scope List