BIS - LIMS (Laboratory Information Management System)

INTERNATIONAL TESTING AND COMPLIANCE (OPC) PRIVATE LIMITED

VILLAGE BUDHENA SECTOR-86 FARIDABAD, NEAR SHIV MANDIR , FARIDABAD, HARYANA, 121002, Faridabad, Faridabad, Haryana, 121002

9811499209 ceo@itclab.in

Scope List

Reset

18 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 302 : Part 2 : Sec 23 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 23 appliances for skin or hair care (First Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation ,Toxicity and similar hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat & Fire)	-	2000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	2000	-
28(Screws & Connection)	-	2000	-
27(Provision For Earthing)	-	2000	-
26(Terminals For External Conductors)	-	2000	-
25(Supply Connection & External Flexible Cables and Cords)	-	2000	-
24(Component)	-	2000	-
23(Internal wiring)	-	2000	-
22(Construction)	-	2000	-
21(Mechanical strength)	-	2000	-
20(Stability & Mechanical Hazards)	-	2000	-
19(Abnormal Operation)	-	2000	-
18(Endurance)	-	2000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	2000	-
16(Leakage Current and Electric Strength)	-	2000	-
15(Moisture Resistance)	-	2000	-
14(Transient Over Voltage)	-	2000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	2000	-
11(Temperature Rise/Heating)	-	2000	-
10(Power Input & Current)	-	2000	-
9(Starting Of Motor Operated Appliances)	-	500	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	2000	-
7(Marking/ Marking & Instructions)	-	1000	-
6(Classification)	-	500	-
22.32(CONSTRUCTION)	-	2000	-
19.11.4.1(Electrostatic discharges)	-	5000	-
19.11.4.3(Fast transient bursts)	-	5000	-
19.11.4.4(Surge immunity test)	-	5000	-
19.11.4.7(Harmonics)	-	5000	-

08 Sep, 2028

-
Included w.e.f.29.09.2025 Exclusion 24 (Component) 19.11.4.2 (Radiated fields) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions)

IS 302 : Part 2 : Sec 32 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 32 massage appliances

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 32 302-2-32 : 1994(Radiation Hazards)	-	1000	-
Cl. 31 302-2-32 : 1994(Resistance to Rusting)	-	1000	-
Cl. 30 302-2-32 : 1994(Resistance to Heat Fire & Tracking )	-	2000	-
Cl. 29 302-2-32 : 1994(Clearances, Creepage Distances & Solid insulation )	-	2000	-
Cl. 28 302-2-32 : 1994(Screws & Connections)	-	2000	-
Cl. 27 302-2-32 : 1994(Provision for Earthing )	-	2000	-
Cl. 26 302-2-32 : 1994(Terminals for External conductors )	-	2000	-
Cl. 25 302-2-32 : 1994(Supply Connection & External Flexible Cords)	-	2000	-
Cl. 24 302-2-32 : 1994(Components)	-	1000	-
Cl. 23 302-2-32 : 1994(Internal Wiring)	-	2000	-
Cl. 22 302-2-32 : 1994(Construction )	-	2000	-
Cl. 21 302-2-32 : 1994(Mechanical strength)	-	2000	-
Cl. 20 302-2-32 : 1994(Stability & Mechanical Hazards)	-	2000	-
Cl. 19 302-2-32 : 1994(Abnormal Operation )	-	2000	-
Cl. 18 302-2-32 : 1994(Endurance)	-	500	-
Cl. 17 302-2-32 : 1994(Overload Protection of Transformers and Associated Circuit)	-	2000	-
Cl. 16 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	2000	-
Cl. 15 302-2-32: 1994(Moisture Resistance Test )	-	2000	-
Cl. 14 302-2-32 : 1994(Radio and television interference suppression / Transient over voltages)	-	500	-
Cl. 13 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
Cl. 11 302-2-32 : 1994(Temperature Rise)	-	2000	-
Cl. 10 302-2-32 : 1994(Power Input and Current )	-	2000	-
Cl. 9 302-2-32 : 1994(Protection Against Electric Shock)	-	2000	-
Cl. 8 302-2-32 : 1994(Starting of motor operated appliances)	-	500	-
Cl. 7 302-2-32 : 1994(Marking)	-	500	-
(CI. 6 IS 302-2-32 : 1994(Classification )	-	500	-
19.11.4.1(Electrostatic discharges)	-	5000	-
19.11.4.3(Fast transient bursts)	-	5000	-
19.11.4.4(Surge immunity test)	-	5000	-
19.11.4.7(Harmonics)	-	5000	-

08 Sep, 2028

-
Included w.e.f.29.09.2025 Exclusion 19.11.4.2 (Radiated fields) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions)

IS 302 : Part 2 : Sec 2 (1997)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 2 vacuum cleaners and water suction cleaning appliances

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	500	-
6(Classification)	-	500	-
7(Marking)	-	1000	-
8(Protection against Access to Live Parts)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	500	-
10("Power Input & Current")	-	2000	-
11(Temperature Rise/ Heating)	-	2000	-
12(OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	500	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	2000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	0	-
15(MOISTURE RESISTANCE)	-	3000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( AFTER HUMIDITY TREATMENT ))	-	2000	-
17(OVERLOAD PROTECTION)	-	1000	-
19(ABNORMAL OPERATION)	-	1000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(Construction)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	2500	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	3500	-
31(RESISTANCE TO RUSTING)	-	2000	-
32(RADIATION HAZARDS)	-	500	-
19.11.4.7(Harmonics)	-	5000	-
19.11.4.4(Surge immunity test)	-	5000	-
19.11.4.3(Fast transient bursts)	-	5000	-
19.11.4.1(Electrostatic discharges)	-	5000	-

08 Sep, 2028

-
Included w.e.f.29.09.2025 Exclusion 24 (COMPONENTS) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.2 (Radiated fields)

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.32(Verification)	-	1000	-
Cl.31(Verification)	-	1000	-
Cl.30(Verification)	-	1000	-
CL.29(Verification)	-	1000	-
Cl.28(Verification)	-	1000	-
Cl.27(Verification)	-	1000	-
Cl.26(Verification)	-	1000	-
Cl.25(Verification)	-	1000	-
Cl.24(Verification)	-	1000	-
Cl.23(Verification)	-	1000	-
Cl.22(Verification)	-	1000	-
Cl.21(Verification)	-	1000	-
Cl.20(Verification)	-	1000	-
Cl.19(Verification)	-	1000	-
Cl. 16(Verification)	-	1000	-
Cl.15(Verification)	-	1000	-
Cl.14(Verification)	-	1000	-
Cl.13(Verification)	-	1000	-
Cl.11(Verification)	-	1000	-
Cl.10(Verification)	-	1000	-
Cl.8(Verification)	-	1000	-
Cl. 7(Verification)	-	1000	-
Cl. 6(Verification)	-	1000	-
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	1000	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	1000	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	1000	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	1000	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	1000	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	1000	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	1000	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	1000	-
Cl. 24 IS 302-2-9(Components)	-	1000	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	1000	-
Cl. 22 IS 302-2-9(Construction )	-	1000	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	1000	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	1000	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	1000	-
Cl. 18 IS 302-2-9(Endurance)	-	1000	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	1000	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	1000	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	1000	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	1000	-
Cl. 13 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl. 11 IS 302-2-9(Heating)	-	1000	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	1000	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	1000	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	1000	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	1000	-
Cl. 6 IS 302-2-9(Classification)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	1000	-
31(Resistance to rusting)	-	1000	-
31(Resistance to rusting)	-	1000	-
30.2.4(Resistance to heat and fire)	-	1000	-
30.2(Resistance to heat and fire)	-	1000	-
30.1(Resistance to heat and fire)	-	1000	-
29.3(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
28.2 to 28.4(Screws and connections)	-	1000	-
28.1, Table No.-14(Screws and connections)	-	1000	-
27.6(Provision for earthing)	-	1000	-
27.5(Provision for earthing)	-	1000	-
27.1 to 27.4(Provision for earthing)	-	1000	-
26.10 & 26.11(Terminals for external conductors)	-	1000	-
26.9(Terminals for external conductors)	-	1000	-
26.1 to 26.8(Terminals for external conductors)	-	1000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	1000	-
25.15(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	1000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	1000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	1000	-
25.4(Supply connection and external flexible cords)	-	1000	-
25.3(Supply connection and external flexible cords)	-	1000	-
25.2(Supply connection and external flexible cords)	-	1000	-
25.1(Supply connection and external flexible cords)	-	1000	-
24.101(Components)	-	1000	-
24.101(Components)	-	1000	-
24.2 to 24.6(Components)	-	1000	-
24.1(Components)	-	1000	-
23.6 to 23.10(Internal wiring)	-	1000	-
23.5(Internal wiring)	-	1000	-
23.4(Internal wiring)	-	1000	-
23.3(Internal wiring)	-	1000	-
23.1 & 23.2(Internal wiring)	-	1000	-
22.111(Constructions)	-	1000	-
22.111(Constructions)	-	1000	-
22.11o(Constructions)	-	1000	-
22.109(Constructions)	-	1000	-
22.108(Constructions)	-	1000	-
22.101 to 22.107(Constructions)	-	1000	-
22.13 to 22.48(Constructions)	-	1000	-
22.12(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.7 to 22.10(Constructions)	-	1000	-
22.6(Constructions)	-	1000	-
22.5(Constructions)	-	1000	-
22.4(Constructions)	-	1000	-
22.3(Constructions)	-	1000	-
22.2(Constructions)	-	1000	-
22.1(Constructions)	-	1000	-
21.101(MECHANICAL STRENGTH)	-	1000	-
21.101(MECHANICAL STRENGTH)	-	1000	-
21.2(MECHANICAL STRENGTH)	-	1000	-
21.1(MECHANICAL STRENGTH)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
19.104(ABNORMAL OPERATION)	-	1000	-
19.103(ABNORMAL OPERATION)	-	1000	-
19.102(ABNORMAL OPERATION)	-	1000	-
19.101(ABNORMAL OPERATION)	-	1000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16.3(Insulation resistance test)	-	1000	-
16.3(Electric strength test)	-	1000	-
16.1 & 16.2(Leakage current test)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.1(Moisture resistance)	-	1000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	1000	-
13.3 and Table No.- 4(Electric strength test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
11.101(Heating)	-	1000	-
11.1 to 11.8, Table No.-3(Heating)	-	1000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	1000	-
8.1.5(Protection against access to live parts)	-	1000	-
8.1.4(Protection against access to live parts)	-	1000	-
8.1.3(Protection against access to live parts)	-	1000	-
8.1.2(Protection against access to live parts)	-	1000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	1000	-
7.14(Legibility & Durability of Markings test)	-	1000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	1000	-
31(Resistance to rusting)	-	1000	-
31(Resistance to rusting)	-	1000	-
30.2.4(Resistance to heat and fire)	-	1000	-
30.2(Resistance to heat and fire)	-	1000	-
30.1(Resistance to heat and fire)	-	1000	-
29.3(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
28.2 to 28.4(Screws and connections)	-	1000	-
28.1, Table No.-14(Screws and connections)	-	1000	-
27.6(Provision for earthing)	-	1000	-
27.5(Provision for earthing)	-	1000	-
27.1 to 27.4(Provision for earthing)	-	1000	-
26.10 & 26.11(Terminals for external conductors)	-	1000	-
26.9(Terminals for external conductors)	-	1000	-
26.1 to 26.8(Terminals for external conductors)	-	1000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	1000	-
25.15(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	1000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	1000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	1000	-
25.4(Supply connection and external flexible cords)	-	1000	-
25.3(Supply connection and external flexible cords)	-	1000	-
25.2(Supply connection and external flexible cords)	-	1000	-
25.1(Supply connection and external flexible cords)	-	1000	-
24.101(Components)	-	1000	-
24.101(Components)	-	1000	-
24.2 to 24.6(Components)	-	1000	-
24.1(Components)	-	1000	-
23.6 to 23.10(Internal wiring)	-	1000	-
23.5(Internal wiring)	-	1000	-
23.4(Internal wiring)	-	1000	-
23.3(Internal wiring)	-	1000	-
23.1 & 23.2(Internal wiring)	-	1000	-
22.111(Constructions)	-	1000	-
22.111(Constructions)	-	1000	-
22.11o(Constructions)	-	1000	-
22.109(Constructions)	-	1000	-
22.108(Constructions)	-	1000	-
22.101 to 22.107(Constructions)	-	1000	-
22.13 to 22.48(Constructions)	-	1000	-
22.12(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.7 to 22.10(Constructions)	-	1000	-
22.6(Constructions)	-	1000	-
22.5(Constructions)	-	1000	-
22.4(Constructions)	-	1000	-
22.3(Constructions)	-	1000	-
22.2(Constructions)	-	1000	-
22.1(Constructions)	-	1000	-
21.101(MECHANICAL STRENGTH)	-	1000	-
21.101(MECHANICAL STRENGTH)	-	1000	-
21.2(MECHANICAL STRENGTH)	-	1000	-
21.1(MECHANICAL STRENGTH)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
19.104(ABNORMAL OPERATION)	-	1000	-
19.103(ABNORMAL OPERATION)	-	1000	-
19.102(ABNORMAL OPERATION)	-	1000	-
19.101(ABNORMAL OPERATION)	-	1000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16.3(Insulation resistance test)	-	1000	-
16.3(Electric strength test)	-	1000	-
16.1 & 16.2(Leakage current test)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.1(Moisture resistance)	-	1000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	1000	-
13.3 and Table No.- 4(Electric strength test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
11.101(Heating)	-	1000	-
11.1 to 11.8, Table No.-3(Heating)	-	1000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	1000	-
8.1.5(Protection against access to live parts)	-	1000	-
8.1.4(Protection against access to live parts)	-	1000	-
8.1.3(Protection against access to live parts)	-	1000	-
8.1.2(Protection against access to live parts)	-	1000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	1000	-
7.14(Legibility & Durability of Markings test)	-	1000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	1000	-
32(Radiation ,Toxicity and similar hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat & Fire)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
28(Screws & Connections)	-	1000	-
27(Provision For Earthing)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
25(Supply Connection & External Flexible Cords)	-	1000	-
24(Components)	-	1000	-
23(Internal wiring)	-	1000	-
22(Construction)	-	1000	-
21(Mechanical strength)	-	1000	-
20(Stability & Mechanical Hazards)	-	1000	-
19(Abnormal Operation)	-	1000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	-
16(Leakage Current and Electric Strength)	-	1000	-
15(Moisture Resistance)	-	1000	-
14(Transient Over Voltage)	-	1000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	-
11(Temperature Rise/ Heating)	-	1000	-
10(Power Input & Current)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	1000	-
8(Protection against access to live parts)	-	1000	-
32(Radiation ,Toxicity and similar hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat & Fire)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
28(Screws & Connections)	-	1000	-
27(Provision For Earthing)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
25(Supply Connection & External Flexible Cords)	-	1000	-
24(Components)	-	1000	-
23(Internal wiring)	-	1000	-
22(Construction)	-	1000	-
21(Mechanical strength)	-	1000	-
20(Stability & Mechanical Hazards)	-	1000	-
19(Abnormal Operation)	-	1000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	-
16(Leakage Current and Electric Strength)	-	1000	-
15(Moisture Resistance)	-	1000	-
14(Transient Over Voltage)	-	1000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	-
11(Temperature Rise/ Heating)	-	1000	-
10(Power Input & Current)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	1000	-
8(Protection against access to live parts)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-

08 Sep, 2028

-
Included .w.e.f.29.09.2025 Exclusion Cl.24 (Verification) Cl. 24 IS 302-2-9 (Components) 24.101 (Components) 24.2 to 24.6 (Components) 19.11.4.2 (Radiated fields) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions)

IS 302 : Part 2 : Sec 7 (2024)

Safety of Household And Similar Electrical Appliances Part 2 Particular Requirements Section 7: Domestic Electric Clothes Washing Machines

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENT)	-	1000	-
6(CLASSIFICATION)	-	1000	-
7(MARKING AND INSTRUCTIONS)	-	2000	-
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	3000	-
10(POWER INPUT AND CURRENT)	-	5000	-
11(HEATING)	-	5000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	4000	-
14(TRANSIENT OVERVOLTAGES)	-	2000	-
15(MOISTURE RESISTANCE)	-	5000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	5000	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	3000	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	3000	-
18(ENDURANCE)	-	4000	-
19(ABNORMAL OPERATION)	-	2000	-
19.11.4.1(Electrostatic discharges)	-	5000	-
19.11.4.3(Fast transient bursts)	-	5000	-
19.11.4.4(Surge immunity test)	-	5000	-
19.11.4.5(Immunity to conducted discharges)	-	5000	-
19.11.4.7(Harmonics)	-	5000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	4000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	3000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	3000	-
27(PROVISION FOR EARTHING)	-	3000	-
28(SCREWS AND CONNECTIONS)	-	4000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000	-
30(RESISTANCE TO HEAT AND FIRE)	-	5000	-
31(RESISTANCE TO RUSTING)	-	5000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	5000	-
19.13(ABNORMAL OPERATION)	-	2000	-
19.101(Abnormal Operation)	-	2000	-
19.102(Abnormal Operation)	-	2000	-

08 Sep, 2028

-
Included w.e.f.29.09.2025 Exclusion 24 (COMPONENTS) 19.11.4.2 (Radiated fields) 19.11.4.6 (Class 3 Voltage dips and interruptions)

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32.0(Radiation, Toxicity and Similar Hazards)	-	1000	-
31.0(Resistance To Rusting)	-	1500	-
30.0(Resistance To Heat and Fire)	-	1000	-
29.0(Creepage Distances and Clearances)	-	2000	-
28.0(Screws and Connections)	-	500	-
27.0(Provision For Earthing)	-	2000	-
26.0(Terminals for external conductors)	-	1000	-
25.0(Supply Connection and External Flexible Cords)	-	1000	-
24.0(Components)	-	1000	-
23.0(Internal Wiring)	-	1000	-
22.0(Construction)	-	1000	-
21.0(Mechanical Strength)	-	1000	-
20.0(Stability and mechanical hazards)	-	1000	-
19.0(Abnormal Operation)	-	1000	-
17.0(Overload Protection of transformer and associated circuit)	-	1000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	1000	-
15.0(Moisture resistance)	-	1000	-
14.0(Transient Overvoltage)	-	1000	-
13.0(Leakage Current and electric strength at operating temperature)	-	1000	-
11.0(Heating)	-	1000	-
10.0(Input and Current)	-	1000	-
8.0(Protection against access to live parts)	-	1000	-
7.0(Classification)	-	1000	-
6.0(Marking and Instructions)	-	1000	-
4(GENERAL REQUIREMENT)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.5(Immunity to conducted discharges)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-

08 Sep, 2028

-
Included w.e.f. 29.09.2025 Exclusion: "24.0 (Components) 19.11.4.2 (Radiated fields) 19.11.4.6 (Class 3 Voltage dips and interruptions) "

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
9(Starting of motor operation test requirements and tests)	-	500	-
10.1(Power input)	-	1000	-
10.2(Current input)	-	1000	-
11.1(General)	-	1000	-
11.2(General)	-	1000	-
11.3(Heating)	-	1500	-
13.1(General)	-	1500	-
13.2(Leakage current at operating temperature)	-	1500	-
13.3(Electric Strength at operating temperature)	-	1000	-
14(Transient Over Voltages)	-	1500	-
15.0(General)	-	1500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1500	-
15.2(Spillage Test)	-	1500	-
15.3(Humidity Test)	-	1500	-
16.0(General)	-	1500	-
16.1(General)	-	1500	-
16.2(Leakage Current (after Clause 15))	-	1500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1500	-
17(Over Load Protection of Transformers and associated circuits)	-	1500	-
18(Endurance Test requirements and tests)	-	500	-
19(Abnormal Operation)	-	1500	-
20(Stability test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
22(Construction verification related test)	-	1000	-
23(General)	-	1000	-
24(Components)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	1500	-
28(Screw test and connections)	-	1500	-
29(clearance, creepage distances and solid insulation)	-	1500	-
30.1(Ball pressure test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
31(Resistance to Rusting)	-	1000	-
32(Radiation Toxicity and Similar Hazards)	-	1000	-
4(General requirement)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.8(Temperature rise)	-	1000	-
4(General Requirement)	-	1000	-
5(General conditions for tests)	-	1000	-
6(Classifications)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	2000	-
19.11.4.3(Fast transient bursts)	-	2000	-
19.11.4.4(Surge immunity test)	-	2000	-
19.11.4.7(Harmonics)	-	2000	-
7(Marking and instructions)	-	2000	-
8.1.1(Protection against live parts in all positions)	-	2000	-
8.1.2(Protection against live parts in openings)	-	2000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	2000	-
8.1.4(Protection against live parts against protective impedance)	-	2000	-
9(Starting of motor operation test requirements and tests)	-	2000	-
10.1(Power input)	-	2000	-
10.2(Current input)	-	2000	-
11.1(General)	-	2000	-
11.2(General)	-	2000	-
11.3(Heating)	-	2000	-
13.1(General)	-	2000	-
13.2(Leakage current at operating temperature)	-	2000	-
13.3(Electric Strength at operating temperature)	-	2000	-
14(Transient Over Voltages)	-	2000	-
15.0(General)	-	2000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	2000	-
15.2(Spillage Test)	-	2000	-
15.3(Humidity Test)	-	2000	-
16.0(General)	-	2000	-
16.1(General)	-	2000	-
16.2(Leakage Current (after Clause 15))	-	2000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	2000	-
17(Over Load Protection of Transformers and associated circuits)	-	2000	-
18(Endurance Test requirements and tests)	-	2000	-
19(Abnormal Operation)	-	2000	-
20(Stability test)	-	2000	-
21(Mechanical Strength Test)	-	2000	-
22(Construction verification related test)	-	2000	-
23(General)	-	500	-
24(Components)	-	2000	-
25(Supply connection and external flexible cords)	-	2000	-
26(Terminals for external conductors)	-	1500	-
27(Provision for earthing)	-	1500	-
28(Screw test and connections)	-	1500	-
29(clearance, creepage distances and solid insulation)	-	1500	-
30.1(Ball pressure test)	-	2000	-
30.2(Glow Wire Test)	-	2000	-
30.2(Needle Flame Test)	-	2000	-
31(Resistance to Rusting)	-	2000	-
32(Radiation Toxicity and Similar Hazards)	-	2000	-
4(General requirement)	-	500	-
16(Leakage current and electric strength)	-	4000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
18(Endurance)	-	2000	-
8.1.5(Live parts of built-in appliances)	-	2000	-
11.4(Heating appliances)	-	2000	-
11.5(Motor-operated appliances)	-	500	-
11.6(Combined appliances)	-	2000	-
11.7(Duration corresponding)	-	2000	-
11.8(Temperature rise)	-	3000	-
4(General Requirement)	-	500	-
5(General conditions for tests)	-	500	-
6(Classifications)	-	500	-
19.11.4.1(Electrostatic discharges)	-	2000	-
19.11.4.3(Fast transient bursts)	-	2000	-
19.11.4.4(Surge immunity test)	-	2000	-
19.11.4.7(Harmonics)	-	2000	-
7(Marking and instructions)	-	2000	-
8.1.1(Protection against live parts in all positions)	-	2000	-
8.1.2(Protection against live parts in openings)	-	2000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	2000	-
8.1.4(Protection against live parts against protective impedance)	-	2000	-
9(Starting of motor operation test requirements and tests)	-	2000	-
10.1(Power input)	-	2000	-
10.2(Current input)	-	2000	-
11.1(General)	-	2000	-
11.2(General)	-	2000	-
11.3(Heating)	-	2000	-
13.1(General)	-	2000	-
13.2(Leakage current at operating temperature)	-	2000	-
13.3(Electric Strength at operating temperature)	-	2000	-
14(Transient Over Voltages)	-	2000	-
15.0(General)	-	2000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	2000	-
15.2(Spillage Test)	-	2000	-
15.3(Humidity Test)	-	2000	-
16.0(General)	-	2000	-
16.1(General)	-	2000	-
16.2(Leakage Current (after Clause 15))	-	2000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	2000	-
17(Over Load Protection of Transformers and associated circuits)	-	2000	-
18(Endurance Test requirements and tests)	-	2000	-
19(Abnormal Operation)	-	2000	-
20(Stability test)	-	2000	-
21(Mechanical Strength Test)	-	2000	-
22(Construction verification related test)	-	2000	-
23(General)	-	2000	-
24(Components)	-	2000	-
25(Supply connection and external flexible cords)	-	2000	-
26(Terminals for external conductors)	-	2000	-
27(Provision for earthing)	-	2000	-
28(Screw test and connections)	-	2000	-
29(clearance, creepage distances and solid insulation)	-	2000	-
30.1(Ball pressure test)	-	2000	-
30.2(Glow Wire Test)	-	2000	-
30.2(Needle Flame Test)	-	2000	-
31(Resistance to Rusting)	-	2000	-
32(Radiation Toxicity and Similar Hazards)	-	2000	-
4(General requirement)	-	2000	-
16(Leakage current and electric strength)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
18(Endurance)	-	2000	-
8.1.5(Live parts of built-in appliances)	-	2000	-
11.4(Heating appliances)	-	2000	-
11.5(Motor-operated appliances)	-	2000	-
11.6(Combined appliances)	-	2000	-
11.7(Duration corresponding)	-	2000	-
11.8(Temperature rise)	-	2000	-
4(General Requirement)	-	500	-
5(General conditions for tests)	-	500	-
6(Classifications)	-	500	-
19.11.4.1(Electrostatic discharges)	-	2000	-
19.11.4.3(Fast transient bursts)	-	2000	-
19.11.4.4(Surge immunity test)	-	2000	-
19.11.4.7(Harmonics)	-	2000	-

08 Sep, 2028

-
Included w.e.f.29.09.205 Exclusion 24 (Components) 19.11.4.2 (Radiated fields) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions)

IS 16221 : Part 2 (2015)

Safety of power converters for use in photovoltaic power systems: Part 2 particular requirements for inverters

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	100000	-
5(Marking and documentation)	-	20000	-
6(Environmental requirements and conditions)	-	10000	-
7(Protection against electric shock and energy hazards)	-	10000	-
8(Protection against Mechanical Hazards)	-	10000	-
9(Protection against Fire Hazards)	-	10000	-
10(Protection against Sonic Pressure Hazards)	-	20000	-
11(Protection against Liquid Hazards)	-	20000	-
12(Protection against Chemical Hazards)	-	21000	-
13(Physical Requirements)	-	25000	-
14(Components)	-	22000	-
14(Components)	-	15000	-
9.1.4.3(Hot flaming oil test)	-	20000	-
Clause No. 4.3(Thermal testing)	-	50000	-
Clause No. 4.4(Testing in single fault condition)	-	20000	-
4.5(Humidity preconditioning)	-	20000	-
4.6(Backfeed voltage protection)	-	10000	-
4.7(Electrical rating tests)	-	10000	-
4.8(Additional tests for grid interactive inverters)	-	20000	-
4(General Test Requirements)	-	25000	-
5(Marking and documentation)	-	15000	-
6(Environmental requirements and conditions)	-	12000	-
7(Protection against electric shock and energy hazards)	-	15000	-
8(Protection against Mechanical Hazards)	-	20000	-
9(Protection against Fire Hazards)	-	10000	-
10(Protection against Sonic Pressure Hazards)	-	10000	-
11(Protection against Liquid Hazards)	-	10000	-
12(Protection against Chemical Hazards)	-	10000	-
13(Physical Requirements)	-	10000	-
4.4.4.15.1(Fault-tolerance of residual current monitoring)	-	10000	-
4.4.4.15.2(Fault-tolerance of automatic disconnecting means)	-	10000	-
4.4.4.16(Stand-alone inverters – Load transfer test)	-	10000	-
4.4.4.17(Cooling system failure – Blanketing test)	-	10000	-
4.7.3(Measurement requirements for AC output ports for stand-alone inverters)	-	10000	-
4.7.4(Stand-alone Inverter AC output voltage and frequency)	-	10000	-
4.7.4.2(Steady state output voltage at nominal DC input)	-	10000	-
4.7.4.3(Steady state output voltage across the DC input range)	-	10000	-
4.7.4.4(Load step response of the output voltage at nominal DC input)	-	10000	-
4.7.4.5(Steady state output frequency)	-	10000	-
4.7.5(Stand-alone inverter output voltage waveform)	-	10000	-
4.7.5.2(Sinusoidal output voltage waveform requirements)	-	10000	-
4.7.5.3(Non-sinusoidal output waveform requirements)	-	10000	-
4.7.5.5(Output voltage waveform requirements for inverters for dedicated loads)	-	10000	-
4.8.2.1(Array insulation resistance detection for inverters for ungrounded arrays)	-	10000	-
4.8.2.2(Array insulation resistance detection for inverters for functionally grounded arrays)	-	10000	-
4.8.3.2(30 mA touch current type test for isolated inverters)	-	10000	-
4,8.3.3(Fire hazard residual current type test for isolated inverters)	-	10000	-
4.8.3.5(Protection by residual current monitoring)	-	10000	-
7.3.10(Additional requirements for stand-alone inverters)	-	10000	-
9.3.4(Inverter backfeed current onto the array)	-	10000	-
13.9(Fault indication)	-	10000	-
Cl.13.6.1.1(Thermal index or capability)	-	10000	-
Cl.13.6.3.1(Resistance to arcing)	-	10000	-
14(Components)	-	10000	-
Cl.14.8(Batteries)	-	10000	-

08 Sep, 2028

-
Included w.e.f.29.09.2025 Exclusion 13.6.4 (UV resistance) Annex j (Ultravoilet light conditioning test) Cl.15 (Software and firmware perfoming safety functions)

IS 16169 (2019)

Utility - Interconnected photovoltaic inverters - Test procedure of islanding prevention measures (First Revision)

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Test for single or multi-phase inverter)	-	100000	-
6 to 6.2(Test for single or multi-phase inverter to Pass/fail criteria)	-	50000	-
7(Documentation)	-	20000	-
4(Testing circuit)	-	10000	-
5(Testing equipment)	-	20000	-
6 to 6.2(Test for single or multi-phase inverter to Pass/fail criteria)	-	50000	-
7(Documentation)	-	20000	-
4(Testing circuit)	-	10000	-
5(Testing equipment)	-	20000	-
6 to 6.2(Test for single or multi-phase inverter to Pass/fail criteria)	-	5000	-
7(Documentation)	-	5000	-
4(Testing circuit)	-	5000	-
5(Testing equipment)	-	10000	-
6 to 6.2(Test for single or multi-phase inverter to Pass/fail criteria)	-	10000	-
7(Documentation)	-	10000	-
4(Testing circuit)	-	20000	-
5(Testing equipment)	-	20000	-

08 Sep, 2028

-
Included w.e.f.29.09.2025

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Components)	-	100	-
4.6(Power interface)	-	5000	-
4.7(Marking & instructions)	-	1500	-
5.1(Protection against shock and energy hazards)	-	2000	-
5.2(Requirement of auxiliary circuits)	-	5000	-
5.3(Protective earthing and bonding)	-	3000	-
5.4(AC and DC power isolation)	-	2000	-
5.5(Over current and earth fault condition)	-	2000	-
5.6(Safety interlocks)	-	1500	-
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2500	-
6.1(Wiring, connections and supply)	-	2000	-
6.2(Connection to power)	-	1800	-
6.3(Wiring terminals for external power conductors)	-	1200	-
7.1(Enclosure)	-	1500	-
7.2(STABILITY)	-	1000	-
7.3(MECHANICAL STRENGTH)	-	2000	-
7.4(Construction details)	-	1600	-
7.5(Resistance to fire)	-	1400	-
7.6(Battery location)	-	3000	-
7.7(Temperature rise)	-	2000	-
8.1(General procision for earth leakage)	-	1000	-
8.2(Electric Strength)	-	1000	-
8.3(Abnormal operating and fault conditions)	-	1000	-
9.0(Connection to telecommunication networks)	-	2000	-

08 Sep, 2028

-
Exclusion: 4.5/RD 1.5 (Components), 2.10.5.11 (SMPS/Main transformer), 2.10.6 (PCB Material), 3.2.5 (Non-rewirable plug with PVC sheathed cable), 3.2.4 (Appliances inlets/connectors), 2.10.5.4 (Semiconductor devices), 2.10.5.13 (Winding wires), 4.3.8 (Batteries), 2.10.5.6 (Thin sheet material), 5.6.1/ RD 2.8.7 (Switches & Relays), 6.1.1/ RD 3.1.4 (Insulating Conductors), Annex I.5 (Solid-state backfeed protection), I.5 (transient overvoltages), I.5 (voltage variations), I.5 (electromagnetic susceptibility), I.5 (electrostatic discharge), Annex M (Ventilation of battery compartments), 2.10.8 of RD (Tests on coated printed boards and coated components), 2.10.9 of RD (Thermal cycling), 2.10.10 of RD (Test for Pollution Degree 1 environment and for insulating compound), 2.10.11 of RD (Tests for semiconductor devices and for cemented joints), Annex L.5, Cl.3.3.3 (Non-linear loads), 4.3.13(Radiation), 4.2.8(Cathode Ray Tubes)

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

700000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Photovoltaic Energy System)	-	25000	-
Cl-4.2(Secondary Cells and Batteries)	-	25000	-
Cl-4.3(General Operating Conditions)	-	25000	-
Cl-4.3.8(Storage)	-	25000	-
Cl-4.3.9(Operating Temperature)	-	25000	-
Cl-5.1(Mechanical Endurance)	-	25000	-
Cl-5.2(Charge Efficiency)	-	25000	-
Cl-5.3(Deep Discharge Protection)	-	25000	-
Cl-5.4(Marking)	-	25000	-
Cl-5.5(Safety)	-	25000	-
Cl-5.6(Documentation)	-	25000	-
Cl-6(Functional characteristice)	-	25000	-
Cl-7(General test conditions)	-	25000	-
Cl-8.1(Capacity Test)	-	25000	-
Cl-8.2(Endurance Test)	-	250000	-
Cl-8.3(Charge Retention Test)	-	25000	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	25000	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	25000	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	5000	-
Cl-9.1(Type Tests)	-	5000	-
Cl-9.2(Acceptance Test)	-	5000	-
4.3.7.1(Specific gravity)	-	5000	-

08 Sep, 2028

-
-

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	300	-
Clause No - 5.18(linear and angular dimension)	-	300	-
Clause No - 6.2(harmfull ingress of water)	-	300	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	600	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	600	-
Clause No - 8.2(Addition)	-	600	-
Clause No - 10.1, Table No. -1(power input deviation)	-	1000	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	1000	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	1000	-
Clause No - 14(Impulse test voltage)	-	1200	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	1200	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	400	-
Clause No -21.1(Mechanical strength)	-	500	-
Clause No -22.1(construction)	-	500	-
Clause No -22.11(push force applied)	-	500	-
Clause No -24.1.2(safety isolating transformer)	-	800	-
Clause No -24.1.3(for switches)	-	800	-
Clause No -24.1.4(for automatic control)	-	800	-
Clause No -24.1.5(for innterconnection couplers)	-	800	-
Clause No -24.4(plug and socket)	-	800	-
Clause No -25.8, Table no -11(conductor resistance)	-	800	-
Clause No -25.5(dimension for pins)	-	800	-
Clause No -27.6(for circuit board)	-	800	-
Clause No -29.2(comparative tracking index)	-	1200	-
Clause No -29.3.3(dry heat test)	-	1200	-
Clause No -30.2.1(glow wire test)	-	1200	-
Clause No -30.101("incorporate combustible material")	-	1200	-
15(MOISTURE RESISTANCE)	-	1500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1200	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	-
18(ENDURANCE)	-	500	-
28(SCREWS AND CONNECTIONS)	-	500	-
31(RESISTANCE TO RUSTING)	-	800	-
22(CONSTRUCTION)	-	1000	-
24(COMPONENTS)	-	1000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	500	-
11(Heating)	-	1400	-

08 Sep, 2028

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC), Cl.15(IPX9), Cl.24(Components)

IS 302 : Part 2 : Sec 8 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 8 Shavers, Hair Clippers and Similar Appliances (First Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	-
8(Protection against access to live parts)	-	800	-
10(Power input and current)	-	1200	-
11(Heating)	-	1500	-
12(Charging of metal-ion batteries)	-	1800	-
13.1 &13.2(Leakage current test)	-	1500	-
13.1 &13.3(Electric strength test)	-	1500	-
14(Transient overvoltages)	-	1000	-
15(Moisture resistance)	-	1600	-
15.3(Moisture resistance)	-	1600	-
16.1 &16.2(Leakage current test)	-	1500	-
16.1 & 16.3(Electric strength test)	-	1500	-
17(Overload protection of transformers and associated circuits)	-	800	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	600	-
19.101(Abnormal operation)	-	600	-
20.1(Stability and mechanical hazards)	-	500	-
20.2(Stability and mechanical hazards)	-	500	-
21(Mechanical strength)	-	1000	-
21.101(Mechanical strength)	-	1000	-
21.102(Mechanical strength)	-	1000	-
21.103(Mechanical strength)	-	1000	-
23(Internal wiring)	-	1200	-
24(Components)	-	1400	-
25("Supply connection and external flexible cords")	-	1600	-
26("Terminals for external conductors")	-	1600	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-
29("Clearances, creepage distances and solid insulation")	-	1500	-
30(Resistance to heat and fire)	-	1500	-
31(Resistance to rusting)	-	1000	-
32("Radiation, toxicity and similar hazards")	-	500	-
22(Construction)	-	700	-
22.101(Construction)	-	700	-
22.102(Construction)	-	700	-
22.103(Construction)	-	700	-

08 Sep, 2028

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC), Cl.15(IPX9), Cl.22.16(Auto Cord Reel Test), Cl.24(Components), Cl.22.46(Software Test), 32.2(Radiation Hazards)

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	200	-
5(General conditions for the tests)	-	200	-
6(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8(Protection against access to live parts)	-	800	-
9(Starting of motor-operated appliances)	-	500	-
10(Power input and current)	-	1200	-
11(Heating)	-	1500	-
13(Leakage current and electric strength at operating temperature)	-	1600	-
14(Transient overvoltages)	-	1000	-
15(Moisture resistance)	-	1000	-
16(Leakage current and electric strength)	-	1600	-
17(Overload protection of transformers and associated circuits)	-	1200	-
18(Endurance)	-	500	-
19(Abnormal operation)	-	900	-
20(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1200	-
22(Construction)	-	1600	-
23(Internal wiring)	-	1400	-
24(Components)	-	1000	-
29(Clearances, creepage distances and solid insulation)	-	1200	-
30(Resistance to heat and fire)	-	1500	-
31(Resistance to rusting)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	500	-
12(Charging of metal-ion batteries)	-	700	-
22.101(rated pressure)	-	500	-
22.102(Closed water heaters)	-	500	-
22.103(Addition)	-	500	-
22.104(Addition)	-	500	-
22.105(Cistern-type water heaters)	-	500	-
22.109(Addition)	-	500	-
25(Supply connection and external flexible cords)	-	700	-
26(Terminals for external conductors)	-	800	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-

08 Sep, 2028

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC), Cl.15(IPX9), Cl.22.16(Auto Cord Reel Test), Cl.24(Components), Cl.22.46(Software Test), 32.2(Radiation Hazards)

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	500	-
Cl-5(General Conditions for the tests)	-	1000	-
Cl-6(Classification)	-	1000	-
Cl-7(Marking)	-	1500	-
Cl-8(Safety Requirements)	-	1000	-
Cl-9(Endurance fpr motor and base assembly)	-	2000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	2000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	2000	-
Cl-10.4(Idli Batter)	-	2000	-
Cl-10.5(Operational Tests for Juicers)	-	2000	-
Cl-11(Temperature Withstand Test for Bowl)	-	1500	-
Cl-12.1(Test for Switches)	-	1800	-
Cl-13(Strength of Assembly)	-	1500	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	1800	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	1200	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	1500	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	1800	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	1800	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1500	-

08 Sep, 2028

-
Exclusion: 19.11.4.1 to 19.11.4.7 (EMI/EMC)

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
6(Classification )	-	500	-
6(Classification )	-	500	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	500	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	500	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	500	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	500	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	500	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	500	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	500	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	500	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	500	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	500	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	500	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	1000	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	1000	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	1000	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	1000	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	1000	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	1000	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1000	-
(Cl.22 of IS 2082:2018)(Finish)	-	1000	-
Cl.22 of IS 2082:2018(Finish)	-	1000	-
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	1000	-
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	1000	-
Cl.19 of IS 2082:2018(Mixing Factor)	-	1000	-
Cl.18 of IS 2082:2018( Reheating Time)	-	1000	-
Cl.17 of IS 2082:2018(Hot Water Output)	-	1000	-
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	1000	-
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	1000	-
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	500	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	500	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	500	-
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	500	-
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	500	-
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	500	-
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	500	-
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	500	-
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	500	-
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	500	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	500	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	500	-
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	500	-
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	500	-
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	500	-
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	500	-
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	500	-
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	500	-
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	500	-
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	500	-
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	500	-
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	500	-
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	500	-
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	500	-
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	500	-
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	500	-
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	500	-
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	500	-
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	500	-
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	500	-
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	500	-
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	500	-
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	500	-
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	500	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	500	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	500	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	500	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	500	-
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	500	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	500	-
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	500	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	500	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	500	-
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	500	-
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	500	-
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	500	-
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	500	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	500	-
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	500	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	500	-
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	500	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	500	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	500	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	500	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	500	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	500	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	500	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	500	-
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	500	-
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	500	-
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	500	-
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	500	-
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	500	-
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	500	-
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	500	-
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	500	-
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	500	-
7.101(Marking : Indifiction of water inlet and water outlet )	-	500	-
7.14(Marking : Legibility and durability)	-	500	-
7.13(Marking : Official language of Instruction )	-	500	-
7.11(Marking : Indication of controls )	-	500	-
7.8(Marking : Terminals )	-	500	-
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	500	-
7.1(Marking : Rated power input)	-	500	-
7.1(Marking : Symbol for nature of supply )	-	500	-
7.1(Marking : Rated Voltage )	-	500	-
Cl.32 of IS 302-1:2008()	-	500	-
4(GENERAL REQUIREMENT)	-	500	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
12(THERMOSTAT SETTING)	-	500	-
Cl-10(Mounting of the water heater)	-	500	-
Cl-11(Measurements of stored water temperature)	-	500	-
Cl-12(Thermostat setting)	-	1000	-
Cl-13(Measurement of energy consumption)	-	1000	-
Cl-14(Verification of the rated capacity)	-	1000	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.108 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.6 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.103 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.109 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.24.101 of IS 302-2-21:2018)(Components)	-	500	-
(Cl.25 of IS 302-2-21:2018)(Supply Connection and External Flexible cords)	-	500	-
7.6(Marking : Symbol used )	-	500	-
7.1(Marking : Warning for Open- outlet )	-	500	-
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	500	-
7.1(Marking : Statement for a pressure-relief device)	-	500	-
7.1(Marking : Rated capacity)	-	500	-
7.1(Marking : Rated pressure)	-	500	-
7.1(Marking : Country of manufacture)	-	500	-
7.1(Marking: IP Number)	-	500	-
7.1(Marking: Symbol for Class II)	-	500	-
7.1(Marking: Model or type reference)	-	500	-

08 Sep, 2028

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC), Cl.15(IPX9), Cl.24(Components)

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	100	-
6(Classification- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	200	-
7.6(Marking- IS 302-1)	-	200	-
7.8(Marking- IS 302-1)	-	200	-
7.11(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.14(Marking- IS 302-1)	-	500	-
7.15(Marking- IS 302-1)	-	100	-
7.101(Marking)	-	100	-
8( Protection Against Electric Shock, IS 302-1)	-	800	-
10(Power Input and Current, IS 302-1)	-	1200	-
11(Heating, IS 302-1)	-	1500	-
11(Heating, IS 302-1)	-	1500	-
11(Heating, IS 302-1)	-	1500	-
11(Heating, IS 302-1)	-	1500	-
11(Heating, IS 302-1)	-	1500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1200	-
15.2(Moisture Resistance, IS 302-1)	-	1200	-
15(Moisture Resistance, IS 302-1)	-	1200	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	800	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	800	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
19.7(Abnormal Operation, IS 302-1)	-	500	-
19.8(Abnormal Operation, IS 302-1)	-	500	-
19.9(Abnormal Operation, IS 302-1)	-	500	-
19.1(Abnormal Operation, IS 302-1)	-	500	-
19.101(Abnormal Operation)	-	500	-
19.102(Abnormal Operation)	-	500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1200	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.101(Stability & Mechanical Hazards)	-	1000	-
20.102(Stability & Mechanical Hazards)	-	1000	-
20.103(Stability & Mechanical Hazards)	-	1000	-
20.104(Stability & Mechanical Hazards)	-	500	-
20.105(Stability & Mechanical Hazards)	-	500	-
20.106(Stability & Mechanical Hazards)	-	500	-
20.107(Stability & Mechanical Hazards)	-	500	-
20.108(Stability & Mechanical Hazards)	-	500	-
20.109(Stability & Mechanical Hazards)	-	500	-
20.110(Stability & Mechanical Hazards)	-	500	-
20.111(Stability & Mechanical Hazards)	-	500	-
20.112(Stability & Mechanical Hazards)	-	500	-
20.113(Stability & Mechanical Hazards)	-	500	-
20.114(Stability & Mechanical Hazards)	-	500	-
20.115(Stability & Mechanical Hazards)	-	500	-
20.116(Stability & Mechanical Hazards)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	500	-
21.2(Mechanical Strength, IS 302-1)	-	500	-
22(Construction, IS 302-1)	-	100	-
22.101(Construction)	-	100	-
22.102(Construction)	-	100	-
23.1(Internal Wiring, IS 302-1)	-	500	-
23.2(Internal Wiring, IS 302-1)	-	500	-
23.3(Internal Wiring, IS 302-1)	-	500	-
23.4(Internal Wiring, IS 302-1)	-	500	-
23.5(Internal Wiring, IS 302-1)	-	500	-
23.6(Internal Wiring, IS 302-1)	-	500	-
23.7(Internal Wiring, IS 302-1)	-	500	-
23.8(Internal Wiring, IS 302-1)	-	500	-
23.9(Internal Wiring, IS 302-1)	-	500	-
23.10(Internal Wiring, IS 302-1)	-	500	-
24.1(Components, IS 302-1)	-	500	-
24.2(Components, IS 302-1)	-	500	-
24.5(Components, IS 302-1)	-	500	-
24.6(Components, IS 302-1)	-	500	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
26(Terminals for External Conductors, IS 302-1)	-	800	-
27(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1200	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1200	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1500	-
31(Resistance of Rusting, IS 302-1)	-	1200	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	500	-
4(GENERAL REQUIREMENTS)	-	100	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	100	-
27(Provision for Earthing)	-	800	-
29(Clearances, Creepage distances and Solid Insulation)	-	1200	-
7.3(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-

08 Sep, 2028

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC), Cl.15(IPX9), Cl.25.7(PVC Test), Cl.24(Components)

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	500	-
11.4(Heating appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.8(Temperature rise)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	700	-
17(Overload protection of transformers and associated circuits)	-	600	-
16(Leakage current and electric strength)	-	500	-
31(Resistance to Rusting)	-	1200	-
6(Classification)	-	500	-
7(Marking and instructions)	-	500	-
10.1(Power input)	-	1000	-
10.2(Current input)	-	1000	-
13(Leakage current and electric strength at operating temperature)	-	600	-
13.2(Leakage current at operating temperature)	-	600	-
13.3(Electric Strength at operating temperature)	-	600	-
14(Transient Over Voltages)	-	700	-
15.0(Moisture resistance)	-	800	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	800	-
15.2(Spillage Test)	-	800	-
15.3(Humidity Test)	-	1000	-
16.0(General)	-	500	-
16.1(General)	-	500	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
18(Endurance)	-	500	-
20(Stability and mechanical hazards)	-	1000	-
21(Mechanical Strength)	-	1000	-
20.1(Stability and mechanical hazards)	-	900	-
21.2(Mechanical strength)	-	900	-
21.3(Mechanical strength)	-	900	-
8.1.4(Protection against live parts against protective impedance)	-	600	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	600	-
8.1.2(Protection against live parts in openings)	-	600	-
8.1.1(Protection against live parts in all positions)	-	600	-
11.3(Heating)	-	800	-
11.2(General)	-	800	-
11.1(General)	-	800	-
23(Internal wiring)	-	1200	-
23.3(Internal wiring)	-	1200	-
24(Components)	-	1000	-
25(Supply connection and external flexible cords)	-	1100	-
25.7(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	500	-
25.15(Supply connection and external flexible cords)	-	500	-
26(Terminals for external conductors)	-	500	-
26.5(Terminals for external conductors)	-	700	-
27(Provision for earthing)	-	900	-
27.5(Provision for earthing)	-	900	-
28(Screw test and connections)	-	600	-
28.1(Screws and connections)	-	800	-
29(clearance, creepage distances and solid insulation)	-	800	-
30.1(Ball pressure test)	-	1000	-
30.2(Glow Wire Test)	-	1200	-
30.2(Needle Flame Test)	-	1200	-
32(Radiation Toxicity and Similar Hazards)	-	800	-
22(Construction)	-	600	-
22.5(Construction)	-	400	-
22.6(Construction)	-	400	-
22.11(Construction)	-	400	-
22.16(Construction)	-	400	-
22.32(Construction)	-	400	-
22.42(Construction)	-	400	-
19(Abnormal Operation)	-	600	-
19.11.4.4(Surge immunity test)	-	600	-
19.17(Abnormal operation)	-	800	-
5(General conditions for the tests)	-	800	-
4(General requirement)	-	400	-
9(Starting of motor operation test requirements and tests)	-	600	-
A.2(Earth continuity test)	-	500	-
Annex C(Ageing test on motors)	-	500	-
Annex D(Thermal motor protectors)	-	500	-
B.22.1(Construction)	-	500	-
B.22.3(Construction)	-	500	-
B.22.4(Construction)	-	700	-
B.22.5(Construction)	-	800	-
18(Endurance)	-	600	-
17(Over Load Protection of Transformers and associated circuits)	-	800	-
15.2(Moisture resistance)	-	500	-
25(Supply connection and external flexible cords)	-	600	-

08 Sep, 2028

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC), Cl.15(IPX9), Cl.22.16(Auto Cord Reel Test), Cl.24(Components), Cl.22.46(Software Test), 32.2(Radiation Hazards)

Bureau of Indian Standards

The National Standards Body of India

INTERNATIONAL TESTING AND COMPLIANCE (OPC) PRIVATE LIMITED

VILLAGE BUDHENA SECTOR-86 FARIDABAD, NEAR SHIV MANDIR , FARIDABAD, HARYANA, 121002, Faridabad, Faridabad, Haryana, 121002

9811499209 ceo@itclab.in

Scope List