BIS - LIMS (Laboratory Information Management System)

PROMINENT TESTING CENTRE LLP

E-43, Focal Point, Patiala, Patiala, Patiala, Punjab, 147001

7986829057 prominenttesting@gmail.com

Scope List

Reset

14 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 12823 (2025)

Prelaminated Medium Density Particle Boards from Wood and other Lignocellulosic Material Specification (Second Revision)

All

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 5(Material - IS 3087)	-	0	-
As per Clause 8 Table 2(Length -IS 2380 (Part 2))	-	200	10% Discount to BIS
As per Clause 8 Table 2(Width - IS 2380 (Part 2))	-	200	10% Discount to BIS
As per Clause 8 Table 2(Thickness - IS 2380 (Part 2))	-	200	10% Discount to BIS
As per Clause 8 Table 2(Squareness, Max -IS 2380 (Part 2))	-	200	10% Discount to BIS
As per Clause 8 Table 2(Edge Straighness, Max - IS 2380 (Part 2))	-	200	10% Discount to BIS
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	500	10% Discount to BIS
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	500	10% Discount to BIS
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	500	10% Discount to BIS
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	1500	10% Discount to BIS
As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	1500	10% Discount to BIS
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	500	10% Discount to BIS
As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	1000	10% Discount to BIS
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	500	10% Discount to BIS
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	500	10% Discount to BIS
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	1000	10% Discount to BIS
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	1000	10% Discount to BIS
As per Clause 9.1 , Table 8(Abrasion resistance in number of revolutions Min. --Annex. B)	-	500	10% Discount to BIS
As per Clause 9.1 , Table 8(Resiatnce to stream/water vapour - Annex. C)	-	500	10% Discount to BIS
As per Clause 9.1 , Table 8(Resitance to crack -Annex. D)	-	500	10% Discount to BIS
As per Clause 9.1 , Table 8(Resistance to cigarette burn -Annex. E)	-	500	10% Discount to BIS
As per Clause 9.1 , Table 8(Resiatnce to stain - Annex. F)	-	500	10% Discount to BIS
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	4500	10% Discount to BIS

27 Oct, 2028

-
Included w.e.f. 03.11.2025 As per Clause 9.1 , Table 9 (Steady-state formaldehyde emission, Fc, mg/m3 (optional test))

IS 14587 (2025)

Prelaminated Medium Density Fibre Boards of Wood and Other Lignocellulosic Materials - Specification ( Second Revision )

All

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 8 Table 2(Length -IS 2380 (Part 2))	-	200	10% Discount to BIS
As per Clause 8 Table 2(Width - IS 2380 (Part 2))	-	200	10% Discount to BIS
As per Clause 8 Table 2(Thickness - IS 2380 (Part 2))	-	200	10% Discount to BIS
As per Clause 8 Table 2(Squareness, Max -IS 2380 (Part 2))	-	200	10% Discount to BIS
As per Clause 8 Table 2(Edge Straighness, Max - IS 2380 (Part 2))	-	200	10% Discount to BIS
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	500	10% Discount to BIS
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	500	10% Discount to BIS
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	500	10% Discount to BIS
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	1500	10% Discount to BIS
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	1500	10% Discount to BIS
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	500	10% Discount to BIS
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	1000	10% Discount to BIS
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	1000	10% Discount to BIS
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	1000	10% Discount to BIS
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	500	10% Discount to BIS
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	500	10% Discount to BIS
As per Clause 9.1 , Table 8(Abrasion resistance in number of revolutions Min. --Annex. B)	-	500	10% Discount to BIS
As per Clause 9.1 , Table 8(Resiatnce to stream/water vapour - Annex. C)	-	500	10% Discount to BIS
As per Clause 9.1 , Table 8(Resitance to crack -Annex. D)	-	500	10% Discount to BIS
As per Clause 9.1 , Table 8(Resistance to cigarette burn -Annex. E)	-	500	10% Discount to BIS
As per Clause 9.1 , Table 8(Resiatnce to stain - Annex. F)	-	500	10% Discount to BIS
As per Clause 9.1 , Table 8(Resiatnce to stain - Annex. F)	-	500	10% Discount to BIS
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	4500	10% Discount to BIS

27 Oct, 2028

-
Included w.e.f. 03.11.2025 As per Clause 9.1 , Table 9 (Steady-state formaldehyde emission, Fc, mg/m3 (optional test))

IS 12406 (2025)

Medium Density Fibre Boards of Wood and Other Lignocellulosic Materials for General Purpose - Specification ( Third Revision )

All

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	100	10% Discount to BIS
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	100	10% Discount to BIS
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	100	10% Discount to BIS
As per Clause 8, Table 2(Thickness - IS 2380 (Part 2))	-	100	10% Discount to BIS
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	200	10% Discount to BIS
As per Clause 8, Table 2(Edge straightness, Max.)	-	200	10% Discount to BIS
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	500	10% Discount to BIS
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	500	10% Discount to BIS
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	500	10% Discount to BIS
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	2500	10% Discount to BIS
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	2500	10% Discount to BIS
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	500	10% Discount to BIS
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	500	10% Discount to BIS
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	500	10% Discount to BIS
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	1500	10% Discount to BIS
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	1000	10% Discount to BIS
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	1000	10% Discount to BIS
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	4500	10% Discount to BIS
Cl-5.1(Wood and Any Other Lignocellulosic Material)	-	0	-
Cl-5.2(Adhesive)	-	8000	10% Discount to BIS
Cl-5.3(Sizing Material)	-	0	-
Cl-5.4(Preservative Treatment)	-	0	-
Cl-6(MANUFACTURE)	-	0	-

27 Oct, 2028

-
Included w.e.f. 03.11.2025 As per Clause 9.1 , Table 9 (Steady-state formaldehyde emission, Fc, mg/m3 (optional test))

IS 848 (2025)

Synthetic Resin Adhesives for Plywood (Phenolic, Aminoplastic and Bio-Materials Based) - Specification ( Third Revision )

MR, BWR & BWP Grade

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 4 Table 1(TYPES)	-	200	10% Discount to BIS
As per Clause 6.6(SETTING TIMES AND CONDITIONS)	-	0	-
As per Clause 7.3.2 Table 1(i)(Cyclic Test For BWP Type)	-	7000	10% Discount to BIS
As per Clause 7.3.2 Table 1(ii)(Cyclic Test For BWR Type)	-	7000	10% Discount to BIS
As per Clause 7.3.2 Table 1(iii)(Cyclic Test For MR Type)	-	7000	10% Discount to BIS
As per Clause 7.4(Acidity And Alkalinity (pH))	-	800	10% Discount to BIS
As per Clause 9(Marking)	-	0	-

27 Oct, 2028

-
Included w.e.f. 03.11.2025

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

CS/ CSC/ CSFF

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Timber)	-	100	10% Discount to BIS
Cl-5.2(Adhesives for Bonding of Veneers)	-	100	10% Discount to BIS
Cl-6.1(Manufacture)	-	0	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	100	10% Discount to BIS
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	-
Cl-6.5(Manufacture (Scarf joints))	-	100	10% Discount to BIS
Cl-6.6(Manufacture ( Preservative treatment))	-	0	-
Cl-7.1(Dimensions -length)	-	300	10% Discount to BIS
Cl-7.2(Thickness)	-	300	10% Discount to BIS
Cl-7.3(Squareness)	-	300	10% Discount to BIS
Cl-8.1, 8.2(Workmanship and finish)	-	500	10% Discount to BIS
Cl-10.3(Moisture Content)	-	500	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength)	-	500	10% Discount to BIS
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	500	10% Discount to BIS
Cl-10.5, 10.5.1(Resistance to Water Test)	-	500	10% Discount to BIS
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	500	10% Discount to BIS
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	500	10% Discount to BIS
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	500	10% Discount to BIS
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	1000	10% Discount to BIS
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	500	10% Discount to BIS
Cl-10.8(Tensile Strength)	-	1000	10% Discount to BIS
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	1000	10% Discount to BIS
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	1000	10% Discount to BIS
Cl-10.10, Table-4 (i) a(Wet Bending Strength -Modulus of Elasticity (MOE),- Average)	-	1000	10% Discount to BIS
Cl-10.10, Table-4 (i) b(Wet Bending Strength - Modulus of Elasticity (MOE),- Minimum individual)	-	1000	10% Discount to BIS
Cl-10.11(Retention of Preservative)	-	3500	10% Discount to BIS
Cl-10.12(Formaldehyde Content Test)	-	4500	10% Discount to BIS
Cl-10.10, Table-4 (ii) a(Wet Bending Strength:- Modulus of Rupture (MOR),- Average)	-	1000	10% Discount to BIS
Cl-10.10, Table-4, (ii) b(Wet Bending Strength; Modulus of Rupture (MOR),- Minimum individual)	-	1000	10% Discount to BIS
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Wood Failure)	-	500	10% Discount to BIS
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Failure Load, N- Resistance to Water)	-	1000	10% Discount to BIS
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Failure Load, N - Resistance to Micro-Organisms)	-	1000	10% Discount to BIS
Cl-10.8 (a)(Tensile strength)	-	1000	10% Discount to BIS
Cl-10.8 (b)(Tensile strength)	-	1000	10% Discount to BIS
Cl-10.8 (c)(Tensile strengths in both directions)	-	1000	10% Discount to BIS
Cl-7.1(Dimensions (width))	-	300	10% Discount to BIS
Cl-7.3(Edge Straightness)	-	300	10% Discount to BIS
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Failure Load, N -Dry State)	-	1000	10% Discount to BIS

27 Oct, 2028

-
Cl-10.5.2 (Water Resistance Test (Alternate method)), Cl-10.13 (Steady-State Formaldehyde Emission Test)

IS 848 (2006)

Synthetic resin adhesives for plywood (Phenolic And Aminoplastic) - Specification (Second Revision)

MR,BWR,BWP

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 Table (i)(BWP (BOiling WaterProof))	-	7000	10% Discount to BIS
4 Table (i)(BWR (Boiling Water Resistant))	-	7000	10% Discount to BIS
4 Table (i)(MR (Moisture Ressistant))	-	7000	10% Discount to BIS
5,7.4(Keeping Quality (Resistance to heat Polymerization))	-	500	10% Discount to BIS
7.4(Acidity and Alkalinity ( pH))	-	1000	10% Discount to BIS

27 Oct, 2028

-
-

IS 12823 (2015)

Prelaminated Particle Boards from Wood and other Lignocellulosic Material - Specification ( First Revision )

Grade 1 & Grade 2

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Grades & Types)	-	0	-
Cl 6(Manufacture)	-	0	-
Cl 7(Finish)	-	100	-
Cl 8(Dimensions & Tolerances)	-	500	10% Discount for BIS Samples
Cl 10.2(Test For Density)	-	1000	10% Discount for BIS Samples
Cl 10.3(Test For Moisture Content)	-	1000	10% Discount for BIS Samples
Cl 10.4(For Water AbsorptionTest )	-	1000	10% Discount for BIS Samples
Cl 10.5(For Swelling in water Test )	-	1000	10% Discount for BIS Samples
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	3000	10% Discount for BIS Samples
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	1000	10% Discount for BIS Samples
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	1000	10% Discount for BIS Samples
Cl 10.9(Test For Screw Withdrawal Strength)	-	1000	10% Discount for BIS Samples
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	1000	10% Discount for BIS Samples
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	1000	10% Discount for BIS Samples
Cl 10.12 & Annex E( Test For Crack Resistance)	-	1000	10% Discount for BIS Samples
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	1000	10% Discount for BIS Samples
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	1000	10% Discount for BIS Samples
Cl 4(Grades & Types)	-	0	-
Cl 6(Manufacture)	-	0	-
Cl 7(Finish)	-	100	10% Discount for BIS Samples
Cl 8(Dimensions & Tolerances)	-	500	10% Discount for BIS Samples
Cl 10.2(Test For Density)	-	1000	10% Discount for BIS Samples
Cl 10.3(Test For Moisture Content)	-	1000	10% Discount for BIS Samples
Cl 10.4(For Water AbsorptionTest )	-	1000	10% Discount for BIS Samples
Cl 10.5(For Swelling in water Test )	-	1000	10% Discount for BIS Samples
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	3000	10% Discount for BIS Samples
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	1000	10% Discount for BIS Samples
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	1000	10% Discount for BIS Samples
Cl 10.9(Test For Screw Withdrawal Strength)	-	1000	10% Discount for BIS Samples
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	1000	10% Discount for BIS Samples
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	1000	10% Discount for BIS Samples
Cl 10.12 & Annex E( Test For Crack Resistance)	-	1000	10% Discount for BIS Samples
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	1000	10% Discount for BIS Samples
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	1000	10% Discount for BIS Samples
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	1000	10% Discount for BIS Samples
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	1000	10% Discount for BIS Samples
Cl 10.12 & Annex E( Test For Crack Resistance)	-	1000	10% Discount for BIS Samples
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	1000	10% Discount for BIS Samples
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	1000	10% Discount for BIS Samples
Cl 10.9(Test For Screw Withdrawal Strength)	-	1000	10% Discount for BIS Samples
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	1000	10% Discount for BIS Samples
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	1000	10% Discount for BIS Samples
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	1000	10% Discount for BIS Samples
Cl 10.5(For Swelling in water Test )	-	1000	10% Discount for BIS Samples
Cl 10.4(For Water AbsorptionTest )	-	1000	10% Discount for BIS Samples
Cl 10.3(Test For Moisture Content)	-	1000	10% Discount for BIS Samples
Cl 10.2(Test For Density)	-	1000	10% Discount for BIS Samples
Cl 8(Dimensions & Tolerances)	-	500	10% Discount for BIS Samples
Cl 7(Finish)	-	100	10% Discount for BIS Samples
Cl 6(Manufacture)	-	0	-
Cl 4(Grades & Types)	-	0	-
Cl 10.15(Test for Formaldehyde Content/Emission)	-	4800	10% Discount for BIS Samples
Cl-11(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-

27 Oct, 2028

-
10.15.2 (Steady-State Formaldehyde Emission Test)

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

ALL

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	1200	-
8.9 table-6(Elongation at Break)	-	750	-
8.8(Tensile Strength for Butt-fusion)	-	750	-
8.7(Density)	-	500	-
8.5 (Oxidation Induction Time)	-	2500	-
8.4( Melt Flow Rate)	-	1000	-
8.2(Longitudinal Reversion Test)	-	1500	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1500	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	15000	-
7.4.1.2(Ovality)	-	250	-
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	500	-
7.2(Length)	-	500	-
6.2.1(6.1.1 Identification Stripes)	-	500	-
6.2(Colour)	-	300	-
6.1.4(PIPE DESCRIPTION)	-	0	-
6.1.3 (PIPE DESCRIPTION)	-	0	-
6, 6.1.2(PIPE DESCRIPTION)	-	0	-
6, 6.1.1(PIPE DESCRIPTION)	-	0	-
6, 6.1(PIPE DESCRIPTION)	-	0	-
8.6(Overall migration)	-	1500	-
8.3(Carbon black)	-	1000	-
5.3(e)(Carbon Black Master Batch)	-	1000	-
5.3(d)(Carbon Black Master Batch)	-	1000	-
5.3(c)(Carbon Black Master Batch)	-	1000	-
5.3 (a)(Carbon Black Master Batch)	-	1000	-
5.2(Polyethylene Resin)	-	10000	-
5, 5.1 table-1(MATERIALS)	-	10000	-
7()	-	400	-
5.2(Density)	-	750	-
5.2(MFI @ 1900C/5.0 Kg)	-	1000	-
5.2(Volatile matter Content)	-	1500	-
Clause 7.1(Visual Apperance)	-	400	-
Clause 7.3(Coiling)	-	500	-
Clause 8.3(Carbon Black content)	-	1000	-
Clause 8.3(Carbon Black Dispersion)	-	1000	-
Clause 8.6(Overall migration (stimulate))	-	1500	-
Clause 8.6(Overall migration (surface of material))	-	1500	-
7.1(Visual Appearance)	-	400	-
7.3(Coiling)	-	500	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	2500	-
Cl. 8.3(Carbon Black Content)	-	1000	-
Cl. 8.3(Carbon Black Dispersion)	-	1000	-
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	1000	-
8.7(Density-IS 7328:2020)	-	750	-
8.7(Corrected Density- IS 7328:2020)	-	750	-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	750	-
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	750	-
Cl 8.3(Carbon Black Content)	-	1000	-
Cl 8.3(Carbon Black Dispersion)	-	1000	-

27 Oct, 2028

-
5.4 (Anti oxydent), 5.3(b) (Carbon Black Master Batch), 5.3 (Toluene Extract), Cl 5.2 Table 2 Sl No V Water content, Cl 5.3(a) Higher Olefin constituent

IS 14587 (2023)

Prelaminated Medium Density Fibre Board - Specification

Grade 1 & Grade 2

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Medium Density Fibre (MDF) Board)	-	0	-
Cl-7(Finish)	-	200	10% Discount to BIS
Cl-8.1(Dimensions of prelaminated MDF)	-	500	10% Discount to BIS
Cl-8.2(Tolerances)	-	500	10% Discount to BIS
Cl-8.2.1(Edge straightness)	-	200	10% Discount to BIS
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	500	10% Discount to BIS
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	200	10% Discount to BIS
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	500	10% Discount to BIS
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	200	10% Discount to BIS
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	1000	10% Discount to BIS
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	1000	10% Discount to BIS
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	1000	10% Discount to BIS
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	1000	10% Discount to BIS
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	1000	10% Discount to BIS
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	1000	10% Discount to BIS
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	1000	10% Discount to BIS
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	5000	10% Discount to BIS
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	500	10% Discount to BIS
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	200	10% Discount to BIS
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	500	10% Discount to BIS
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	200	10% Discount to BIS
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	200	10% Discount to BIS
Cl-11.2(Specific Requirement)	-	0	-
Cl-12(Marking)	-	0	-
Cl-5.2(Impregnated Base Paper)	-	1000	10% Discount to BIS
Cl-5.3(Impregnated Overlay)	-	1000	10% Discount to BIS

27 Oct, 2028

-
Cl-9.1 S.No-(1), xii (Steady-state formaldehyde emission (Fc), mg/m3)

IS 12406 (2021)

Medium density fibre boards for general purpose - Specification

Grade 1, Grade 2

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clauses 5.2, 9 and 10.2.2(Density)	-	500	10% Discount to BIS
Clauses 5.2, 9 and 10.2.2(Density)	-	500	10% Discount to BIS
Clauses 5.2, 9 and 10.2.2(Variation from mean density)	-	200	10% Discount to BIS
Clauses 5.2, 9 and 10.2.2(Moisture Content)	-	500	10% Discount to BIS
Clauses 5.2, 9 and 10.2.2(Variation from mean moisture content)	-	200	10% Discount to BIS
Clauses 5.2, 9 and 10.2.2(Linear expansion (Thickness Swelling in Water) Due to general Absorption after 24h soaking)	-	1000	10% Discount to BIS
Clauses 5.2, 9 and 10.2.2(Internal Bond Strength)	-	500	10% Discount to BIS
Clauses 5.2, 9 and 10.2.2(Internal Bond strength (i) (After Cyclic test) (ii) (After accelerated water resistance test))	-	1000	10% Discount to BIS
Clauses 5.2, 9 and 10.2.2(Modulus of Rupture a) Avg. Value b) Min. Individual)	-	1000	10% Discount to BIS
Clauses 5.2, 9 and 10.2.2(Modulus of Elasticity a) Avg. Value b) Min. Individual)	-	1000	10% Discount to BIS
Clauses 5.2, 9 and 10.2.2(Screw withdrawl strength (i) Face (ii) Edge (For thickness >12mm))	-	1000	10% Discount to BIS
Clauses 5.2, 9 and 10.2.2(Formaldehyde Content (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	5000	10% Discount to BIS
8(DIMENSIONS AND TOLERANCES)	-	500	10% Discount to BIS
Cl-11(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-
Cl 7(Finish)	-	200	10% Discount to BIS

27 Oct, 2028

-
Clauses 5.2, 9 and 10.2.2 (Steady State Formaldehyde emission (Fc (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

BWP/ MR

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.6(Spot test - Annexure L)	-	1500	10% Discount for BIS Samples
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	1600	10% Discount for BIS Samples
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	1600	10% Discount for BIS Samples
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	1600	10% Discount for BIS Samples
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	1600	10% Discount for BIS Samples
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	1500	10% Discount for BIS Samples
9.2.3(Adhesion of Plies - Annexure H)	-	600	10% Discount for BIS Samples
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	1000	10% Discount for BIS Samples
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	1000	10% Discount for BIS Samples
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	1000	10% Discount for BIS Samples
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	1000	10% Discount for BIS Samples
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	1000	10% Discount for BIS Samples
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	1000	10% Discount for BIS Samples
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	1000	10% Discount for BIS Samples
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	1000	10% Discount for BIS Samples
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	1000	10% Discount for BIS Samples
7.3(Dimensional Requirements - Squareness - Annexure D)	-	500	10% Discount for BIS Samples
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	500	10% Discount for BIS Samples
7.3(Dimensional Requirements - Thickness - Annexure E)	-	500	10% Discount for BIS Samples
7.3(Dimensional Requirements - Width - 8.1.4)	-	500	10% Discount for BIS Samples
7.3(Dimensional Requirements - Length - 8.1.4)	-	500	10% Discount for BIS Samples
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	500	10% Discount for BIS Samples
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	500	10% Discount for BIS Samples
9.2.6 (mechanical)(Spot test - Annexure L)	-	1500	10% Discount for BIS Samples
6.2(Core- Moisture & Width)	-	500	10% Discount for BIS Samples
6.3(Cross Bands and Faces- Moisture content)	-	500	10% Discount for BIS Samples
6.3.1(Thickness of cross band and face veneers)	-	100	10% Discount for BIS Samples
Cl-7.1(Thickness)	-	100	10% Discount for BIS Samples
Cl-7.2(Sizes)	-	200	10% Discount for BIS Samples
cl. 11(marking)	-	0	-
cl. 11.1(marking - BIS certification marking)	-	0	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-

27 Oct, 2028

-
-

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

All Grade

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Timber)	-	100	10% Discount to BIS
Cl-4.2(Adhesive)	-	100	10% Discount to BIS
Cl-5.1(Veneers)	-	100	10% Discount to BIS
Cl-5.2.1(Glueing)	-	100	10% Discount to BIS
Cl -5.2.2(Thickness of Veneers)	-	100	10% Discount to BIS
Cl - 5.2.3.1(Joint in Veneers)	-	100	10% Discount to BIS
Cl - 5.2.3.2(Edge joints)	-	100	10% Discount to BIS
Cl - 5.2.3.3(End joints)	-	100	10% Discount to BIS
Cl - 5.2.4(Grain Direction)	-	100	10% Discount to BIS
Cl-5.3(Treatment)	-	100	10% Discount to BIS
Cl-5.4(Moisture Content)	-	500	10% Discount to BIS
Cl-6.1(Dimensions (length))	-	300	10% Discount to BIS
Cl-6.2(Thickness)	-	300	10% Discount to BIS
Cl-6.3(Squareness)	-	300	10% Discount to BIS
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	300	10% Discount to BIS
Cl-9.3(Moisture Content)	-	500	10% Discount to BIS
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	500	10% Discount to BIS
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	500	10% Discount to BIS
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	500	10% Discount to BIS
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	500	10% Discount to BIS
Cl-9.5.2(Water Resistance Test)	-	0	facility not available
Cl-9.6(Tensile Strength-Along the grain)	-	1000	10% Discount to BIS
Cl-9.7(Mycological Test -Adhesion)	-	1000	10% Discount to BIS
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	10% Discount to BIS
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	10% Discount to BIS
Cl-9.9, Table-3 (i) a(Wet Bending Strength- Modulus of Elasticity (MOE)- Average)	-	1500	10% Discount to BIS
Cl-9.9, Table-3 (i) b(Wet Bending Strength- Modulus of Elasticity (MOE),-Minimum individual)	-	1500	10% Discount to BIS
Cl-9.10(Retention of Preservative)	-	2500	10% Discount to BIS
Cl-9.11(Formaldehyde Content Test)	-	4000	10% Discount to BIS
Cl-9.4.2(Adhesion of Plies)	-	100	10% Discount to BIS
5.1.1(Defects in veneers)	-	100	10% Discount to BIS
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1500	10% Discount to BIS
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1500	10% Discount to BIS
Cl-9.9, Table-3 (ii) a(Wet Bending Strength- Modulus of Rupture (MOR)-Average)	-	1500	10% Discount to BIS
Cl-9.9, Table-3 (ii) b(Wet Bending Strength- Modulus of Rupture (MOR), -Minimum individual)	-	1500	10% Discount to BIS
Cl - 5.2.3.4(Scarf joints)	-	100	10% Discount to BIS

27 Oct, 2028

-
Cl-9.12 (Steady-State Formaldehyde Emission Test), Cl-9.5.2 (Water Resistance Test)

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

MR/ BWR/ BWP

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	100	10% Discount to BIS
Cl-5.2, Table- 1 (i)(Blister)	-	100	10% Discount to BIS
Cl-5.2, Table- 1 (ii)(Checks)	-	100	10% Discount to BIS
Cl-5.2, Table- 1 (iii)(Discolouration)	-	100	10% Discount to BIS
Cl-5.2, Table- 1 (iv)(Dote)	-	100	10% Discount to BIS
Cl-5.2, Table- 1 (v)(Insect hole)	-	100	10% Discount to BIS
Cl-5.2, Table- 1 (vi)(Joints)	-	100	10% Discount to BIS
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	100	10% Discount to BIS
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	100	10% Discount to BIS
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	100	10% Discount to BIS
Cl-5.2, Table- 1 (x)(Knots (tight))	-	100	10% Discount to BIS
Cl-5.2, Table- 1 (xi)(Patches)	-	100	10% Discount to BIS
Cl-5.2, Table- 1 (xii)(Splits)	-	100	10% Discount to BIS
Cl-5.2, Table- 1 (xiii)(Swirl)	-	100	10% Discount to BIS
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	100	10% Discount to BIS
Cl-6.1(Timber)	-	100	10% Discount to BIS
Cl-6.2(Adhesive)	-	100	10% Discount to BIS
Cl-7.2.1(Thickness of veneers)	-	100	10% Discount to BIS
Cl-7.2.3(Grain Direction)	-	100	10% Discount to BIS
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	100	10% Discount to BIS
Cl-7.2.5.2(Splits)	-	100	10% Discount to BIS
Cl-7.2.5.3(Overlap)	-	100	10% Discount to BIS
Cl-8.1(Dimensions -length)	-	100	10% Discount to BIS
Cl-8.2(Thickness of the plywood boards)	-	100	10% Discount to BIS
Cl-8.3(Squareness)	-	100	10% Discount to BIS
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	500	10% Discount to BIS
Cl-11.3.2(Mycological Test)	-	1500	10% Discount to BIS
Cl-11.4(Moisture Content)	-	500	10% Discount to BIS
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	10% Discount to BIS
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	10% Discount to BIS
Cl-11.6(Formaldehyde Content Test)	-	5000	10% Discount to BIS
Cl-9(WORKMANSHIP AND FINISH)	-	0	-
Cl-7.2.4(Scarf Joints)	-	0	-

27 Oct, 2028

-
Cl-11.7 (Steady-State Formaldehyde Emission Test)

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

All

23000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	500	-
10.1(Surface Finish)	-	500	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	500	-
10.7(Sulphated Ash Content)	-	2000	-
5(CLASSIFICATION OF PIPES)	-	500	-
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	200	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	200	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	200	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	200	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	200	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	200	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	200	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	200	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	200	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	200	-
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	200	-
7.2.1(DIMENSIONS-Socket)	-	200	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	200	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	200	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	200	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	200	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	200	-
8(SEALING RINGS)	-	200	-
9.1(PIPE ENDS)	-	500	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	1000	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	2000	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	2000	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	1000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	20000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	5000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	20000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	5000	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	5000	-
11.2(Resistance to External Blows at 0°C)	-	2000	-
10.3(Effect on Water Test)	-	5000	-
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	500	-
7.1.4(Length)	-	500	-
7.2.1.2b(Maximum inner diameter of groove)	-	200	-
13.1(Marking)	-	200	-
cL-13.1.1(Marking)	-	200	-
Cl-13.1.2(Marking)	-	200	-

27 Oct, 2028

-
6.1.2 (PVC Resin), 6.1.1 (VCM Content)

Bureau of Indian Standards

The National Standards Body of India

PROMINENT TESTING CENTRE LLP

E-43, Focal Point, Patiala, Patiala, Patiala, Punjab, 147001

7986829057 prominenttesting@gmail.com

Scope List