BIS - LIMS (Laboratory Information Management System)

Havells India Limited (Havells Research & Development Laboratory)

Plot No. 6, Site-IV, Industrial Area, Sahibabad, Ghaziabad, Uttar Pradesh, 201010

9958238383 satyabrata.tripathy@havells.com

Scope List

Reset

4 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS/IEC 60947 : Part 5 : Sec 1 (2016)

Low-Voltage Switchgear And Control Gear : Part 5-1 Control Circuit Devices And Switching Elements Electromechanical Control Circuit Devices

Control Circuit Devices and Switching Elements

2065000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1(Marking : General ")	-	10000	Only for internal testing
5.2.2(Terminal identification and marking)	-	10000	Only for internal testing
5.2.3(Functional markings)	-	0	Only for internal testing
5.2.5(Operating diagram)	-	0	Only for internal testing
5.2.5.2(Terminal markings for operating diagrams)	-	0	Only for internal testing
5.2.6(Time delay markings)	-	0	Only for internal testing
5.3(Instructions for installation, operation and maintenance)	-	0	Only for internal testing
7.1.2.2(Glow-wire testing)	-	15000	Only for internal testing
7.1.3(Current-carrying parts and their connections)	-	0	Only for internal testing
7.1.4(Clearances and creepage distances)	-	10000	Only for internal testing
7.2.3(Dielectric properties)	-	20000	Only for internal testing
8.2.1.1(Test of resistance to abnormal heat and fire)	-	15000	Only for internal testing
8.2.1.1.1(Glow-wire test)	-	15000	Only for internal testing
8.2.3(Enclosures for equipment)	-	0	Only for internal testing
8.2.4(Mechanical and electrical properties of terminals)	-	30000	Only for internal testing
8.2.4.2(Tests of mechanical strength of terminals)	-	30000	Only for internal testing
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	30000	Only for internal testing
8.2.4.4(Pull-out test)	-	30000	Only for internal testing
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	0	Only for internal testing
8.2.6(Verification of limitation of rotation (of a rotary switch))	-	30000	Only for internal testing
8.3.3.3(Temperature rise)	-	30000	Only for internal testing
8.3.3.4(Dielectric properties)	-	20000	Only for internal testing
8.3.3.2(Operating limits of contactor relays)	-	20000	Only for internal testing
8.3.4.3(Test circuit and test quantities)	-	0	Only for internal testing
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	200000	Only for internal testing as per each rating
8.3.4.4 b)(Condition of the switching element after the test)	-	20000	Only for internal testing
8.3.4.4 a)(Condition of the switching element after the test)	-	20000	Only for internal testing
8.3.1(Degree of protection of enclosed control circuit devices)	-	15000	Only for internal testing
5.2.1(" Marking : General ")	-	0	Only for internal testing
5.2.2(Terminal identification and marking)	-	10000	Only for internal testing
5.2.3(Functional markings)	-	0	Only for internal testing
5.2.5(Operating diagram)	-	0	Only for internal testing
5.2.5.2(Terminal markings for operating diagrams)	-	0	Only for internal testing
5.2.6(Time delay markings)	-	0	Only for internal testing
5.3(Instructions for installation, operation and maintenance)	-	0	Only for internal testing
7.1.2.2(Glow-wire testing)	-	15000	Only for internal testing
7.1.3(Current-carrying parts and their connections)	-	0	Only for internal testing
7.1.4 of IEC 60947-1:2007 (Sequence 6)(Measurement of Clearances and creepage distances)	-	20000	Only for internal testing
8.3.3.2(Operating limits of contactor relays)	-	20000	Only for internal testing
7.2.3(Dielectric properties)	-	20000	Only for internal testing
8.3.3.4(Dielectric properties)	-	20000	Only for internal testing
8.3.3.3(Temperature rise)	-	30000	Only for internal testing
8.2.6 (Sequence 6)(Verification of limitation of rotation (of a rotary switch))	-	30000	Only for internal testing
8.2.1.1(Test of resistance to abnormal heat and fire)	-	15000	Only for internal testing
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	30000	Only for internal testing
8.2.1.1.1(Glow-wire test)	-	15000	Only for internal testing
8.2.4.4(Pull-out test)	-	30000	Only for internal testing
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	30000	Only for internal testing
8.2.4.2(Tests of mechanical strength of terminals)	-	30000	Only for internal testing
8.2.4(Mechanical and electrical properties of terminals)	-	30000	Only for internal testing
8.2.3(Enclosures for equipment)	-	0	Only for internal testing
8.3.3.5.6 b(Dielectric verification)	-	20000	Only for internal testing
8.3.4.1(General conditions for short-circuit tests)	-	200000	Only for internal testing as per each rating
Annex C of IEC 60947-1:2007 (Sequence 5)(Degree of protection of enclosed control circuit devices)	-	15000	Only for internal testing
8.3.4.4 a)(Condition of the switching element after the test)	-	20000	Only for internal testing
8.3.4.4 b)(Condition of the switching element after the test)	-	20000	Only for internal testing
8.3.4.1(General conditions for short-circuit tests)	-	200000	Only for internal testing as per each rating
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	200000	Only for internal testing as per each rating
8.3.4.3(Test circuit and test quantities)	-	200000	Only for internal testing as per each rating
8.3.4(Performance under Conditional Short-Circuit Current)	-	200000	Only for internal testing as per each rating

07 Aug, 2028

-
-

IS/IEC 60947 : Part 4 : Sec 1 (2018)

Low-Voltage switchgear and controlgear : Part 4-1 Contactors and motor starters electromechanical contactors and motor-Starters

Contactors and Motor-Starters

2235000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.2(Materials)	-	0	Only for internal testing
8.1.2.1(General materials requirements)	-	0	Only for internal testing
8.1.2.2(Glow wire testing)	-	15000	Only for internal testing
8.1.3(Current-carrying parts and their connections)	-	0	Only for internal testing
8.1.4(Clearances and creepage distances)	-	20000	Only for internal testing
8.1.5.1(Insulation)	-	10000	Only for internal testing
8.1.5.2(Direction of movement)	-	10000	Only for internal testing
8.1.5.3(Mounting)	-	10000	Only for internal testing
8.1.5.4(Protection)	-	0	Only for internal testing
8.1.8(Terminals)	-	10000	Only for internal testing
8.1.8.1(General)	-	10000	Only for internal testing
8.1.8.2(Terminal identification and marking)	-	10000	Only for internal testing
8.1.10(Provisions for protective earthing)	-	0	Only for internal testing
8.1.11(Enclosures for equipment)	-	20000	Only for internal testing
8.1.11.1(Design)	-	0	Only for internal testing
8.1.11.2(Insulation)	-	10000	Only for internal testing
8.1.12(Degrees of protection of enclosed equipment)	-	30000	Only for internal testing
8.1.14(Limited energy source)	-	10000	Only for internal testing
8.1.14.1(General)	-	0	Only for internal testing
8.1.14.2(Limited energy source with galvanic separation)	-	0	Only for internal testing
8.1.16(Fault and abnormal conditions)	-	10000	Only for internal testing
8.1.17(Short-circuit and overload protection of ports)	-	10000	Only for internal testing
8.2(Performance requirements)	-	0	Only for internal testing
8.2.1(Operating conditions)	-	0	Only for internal testing
8.2.1.1.1(General conditions)	-	0	Only for internal testing
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	10000	Only for internal testing
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	10000	Only for internal testing
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	10000	Only for internal testing
8.2.1.5(Limits of operation of current sensing relays and releases)	-	10000	Only for internal testing
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	10000	Only for internal testing
8.2.1.5.1.1(General tripping requirements of overload relays)	-	20000	Only for internal testing
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	20000	Only for internal testing
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	10000	Only for internal testing
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	10000	Only for internal testing
8.2.1.5.4.1(Limits of operation of under-current relays)	-	10000	Only for internal testing
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	10000	Only for internal testing
8.2.2(Temperature-rise)	-	30000	Only for internal testing
8.2.2.3(Accessible parts)	-	10000	Only for internal testing
8.2.2.4(Ambient air temperature)	-	10000	Only for internal testing
8.2.2.5(Main circuit)	-	0	Only for internal testing
8.2.2.6(Control circuits)	-	0	Only for internal testing
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	10000	Only for internal testing
8.2.3(Dielectric properties)	-	20000	Only for internal testing
8.2.3.2(Voltage limiting components between circuits)	-	0	Only for internal testing
8.2.4.3.1(Mechanical durability)	-	20000	Only for internal testing
8.2.4.3.2(Electrical durability)	-	20000	Only for internal testing
8.2.4.4(Overload current withstand capability of contactors)	-	30000	Only for internal testing
8.2.4.5(Coil power consumption)	-	30000	Only for internal testing
8.2.4.6(Pole impedance)	-	30000	Only for internal testing
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	100000	Only for internal testing
8.2.5.1(Performance under short-circuit conditions)	-	200000	Only for internal testing, as per each rating
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	200000	Only for internal testing, as per each rating
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	200000	200000
9.1.5.2(Environment tests)	-	0	Only for internal testing
9.2.4(Limited energy source test)	-	10000	Only for internal testing
9.3.3.2(Operating limits)	-	20000	Only for internal testing
9.3.3.2.1.2(Coil power consumption)	-	30000	Only for internal testing
9.3.3.2.1.3(Pole impedance)	-	30000	Only for internal testing
9.3.3.2.2(Relays and releases)	-	20000	Only for internal testing
9.3.3.3.1(Ambient air temperature)	-	0	Only for internal testing
9.3.3.3.2(Measurement of the temperature of parts)	-	30000	Only for internal testing
9.3.3.3.3(Temperature-rise of a part)	-	30000	Only for internal testing
9.3.3.3.4(Temperature-rise of the main circuit)	-	30000	Only for internal testing
9.3.3.3.5(Temperature-rise of control circuits)	-	30000	Only for internal testing
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	30000	Only for internal testing
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	30000	Only for internal testing
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	30000	Only for internal testing
9.3.3.6(Operational performance capability)	-	80000	Only for internal testing
9.3.4.2.2(prospective current)	-	200000	Only for internal testing, as per each rating
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	200000	Only for internal testing, as per each rating
9.3.5(Overload current withstand capability of contactors)	-	30000	Only for internal testing
9.3.6.2(Operation and operating limits)	-	30000	Only for internal testing
9.3.6.3(Dielectric tests)	-	20000	Only for internal testing
9.3.6.4(Mechanical operation tests of a MPSD)	-	90000	Only for internal testing
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	30000	Only for internal testing
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	30000	Only for internal testing

07 Aug, 2028

-
-

IS/IEC 60947 : Part 2 (2016)

Low - Voltage switchgear and controlgear: Part 2 circuit - Breakers (First Revision)

Circuit-Breakers

3874000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3.3.2(Tripping limits and characteristics)	-	100000	Only for internal testing
8.3.3.3(Test of dielectric properties)	-	65000	Only for internal testing
8.3.3.4(Mechanical operation and operational performance capability)	-	90000	Only for internal testing
8.3.3.5(Overload performance)	-	150000	Only for internal testing
8.3.3.6(Verification of dielectric withstand)	-	30000	Only for internal testing
8.3.3.7(Verification of temperature-rise)	-	25000	Only for internal testing
8.3.3.8(Verification of Overload releases)	-	4000	Only for internal testing
8.3.3.9(Verification of undervoltage and shunt releases)	-	10000	Only for internal testing
8.3.3.10(Verification of main contact position)	-	5000	Only for internal testing
8.3.4.3(Verification of operational performance capability)	-	50000	Only for internal testing
8.3.8.5(Verification of operational performance capability)	-	30000	Only for internal testing
8.4.2(Mechanical operation tests)	-	15000	Only for internal testing
8.4.3(Verification of the calibration of overcurrent releases)	-	10000	Only for internal testing
8.4.4(Verification of the operation of undervoltage and shunt releases)	-	10000	Only for internal testing
8.4.6(Dielectric tests)	-	60000	Only for internal testing
8.4.7(Test for the verifiacation of clearances less than those corresponding to case A of Table 13 of IEC 60947-1:2007)	-	3000	Only for internal testing
8.3.4.4(Verification of dielectric withstand)	-	28000	Only for internal testing
8.3.5.4(Verification of dielectric withstand)	-	28000	Only for internal testing
8.3.6.6(Verification of dielectric withstand)	-	28000	Only for internal testing
8.3.8.6(Verification of dielectric withstand)	-	28000	Only for internal testing
8.3.4.5(Verifiation of temperature-rise)	-	25000	Only for internal testing
8.3.6.4(Verification of temperature-rise)	-	25000	Only for internal testing
8.3.8.7(Verification of temperature-rise)	-	25000	Only for internal testing
8.3.4.6(Verification of Overload releases)	-	5000	Only for internal testing
8.3.5.2(Verification of Overload releases)	-	5000	Only for internal testing
8.3.5.5(Verification of Overload releases)	-	5000	Only for internal testing
8.3.6.2(Verification of Overload releases)	-	5000	Only for internal testing
8.3.6.7(Verification of Overload releases)	-	5000	Only for internal testing
8.3.8.2(Verification of Overload releases)	-	5000	Only for internal testing
8.3.8.8(Verification of Overload releases)	-	5000	Only for internal testing
8.3.4.1(General)	-	0	Only for internal testing
8.3.4.2(Test of service short circuit breaking capacity)	-	10000	Only for internal testing
8.3.5.1(General)	-	0	Only for internal testing
8.3.5.3(Rated ultimate short-circuit breaking capacity)	-	200000	Only for internal testing as per each rating
8.3.6.1(General)	-	0	Only for internal testing
8.3.6.3(Rated short-time withstand current)	-	200000	Only for internal testing as per each rating
8.3.6.5(Short-circuit breaking capacity at maximum short-time withstand current)	-	200000	Only for internal testing as per each rating
8.3.7.1(General)	-	0	Only for internal testing
8.3.8.1(General)	-	0	Only for internal testing
8.3.8.3(Rated short-time withstand current)	-	200000	Only for internal testing as per each rating
8.3.8.4(Rated service short-circuit breaking capacity*)	-	200000	Only for internal testing as per each rating
8.3.4.1(General)	-	0	Only for internal testing
8.3.4.2(rated short circuit breaking capacity (sequence II))	-	200000	Only for internal testing as per each rating
8.3.4.3(verification of operational performance capability (sequence II))	-	50000	Only for internal testing
8.3.4.4(verification of dielectric withstand (sequnce II))	-	28000	Only for internal testing
8.3.4.5(verification of temperature-rise (sequence II))	-	25000	Only for internal testing
8.3.4.6(verification of overload releases (sequence II))	-	5000	Only for internal testing
8.3.5.1(General)	-	0	Only for internal testing
8.3.5.2(verification of overload releases (sequence III))	-	5000	Only for internal testing
8.3.5.3(rated short circuit breaking capacity (sequence III))	-	200000	Only for internal testing as per each rating
8.3.5.4(verification of dielectric withstand (sequnce III))	-	28000	Only for internal testing
8.3.5.5(verification of overload releases (sequence III))	-	5000	Only for internal testing
8.3.6.1(General)	-	0	Only for internal testing
8.3.6.2(verification of overload releases (sequence IV))	-	5000	Only for internal testing
8.3.6.3(rated short circuit withstand current (sequence IV))	-	200000	Only for internal testing as per each rating
8.3.6.4(verification of temperature-rise (sequence IV))	-	25000	Only for internal testing
8.3.6.5(short circuit breaking capacity at maximum short time withstand current (sequence IV))	-	200000	Only for internal testing as per each rating
8.3.6.6(verification of dielectric withstand (sequence IV))	-	28000	Only for internal testing
8.3.6.7(verification of overload releases (sequence IV))	-	5000	Only for internal testing
8.3.8.1(General)	-	0	Only for internal testing
8.3.8.2(verification of overload releases (sequence VI))	-	5000	Only for internal testing
8.3.8.3(rated short time withstand current (sequence VI))	-	200000	Only for internal testing as per each rating
8.3.8.4(rated service short circuit breaking capacity (sequence VI))	-	200000	Only for internal testing as per each rating
8.3.8.5(verification of operational performance capability (sequence VI))	-	50000	Only for internal testing
8.3.8.6(verification of dielectric withstand (sequence VI))	-	28000	Only for internal testing
8.3.8.7(verification of temperature-rise (sequence VI))	-	25000	Only for internal testing
8.3.8.8(verification of overload releases (sequence VI))	-	5000	Only for internal testing
C.2(individual pole short circuit breaking capacity (Isu))	-	200000	Only for internal testing as per each rating
C.3(verification of dielectric withstand)	-	25000	Only for internal testing
C.4(verification of overload releases)	-	5000	Only for internal testing
H.2(individual pole short circuit (IIT))	-	200000	Only for internal testing as per each rating
H.3(verification of dielectric withstand)	-	28000	Only for internal testing
H.4(verification of overload releases)	-	5000	Only for internal testing

07 Aug, 2028

-
-

IS/IEC 60947 : PART 3 (2020)

Low-Voltage Switchgear and Controlgear: Part 3 Switches Disconnectors Switch-Disconnectors and Fuse-Combination Units

Switches, Disconnectors, Switch- Disconnectors and Fuse-Combination Units

2593000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	0	Only for internal testing
4(Classification)	-	10000	Only for internal testing
5.3.2(Rated voltages)	-	0	Only for internal testing
5.3.2.1(Rated operational voltage)	-	0	Only for internal testing
5.3.2.2(Rated insulation voltage)	-	0	Only for internal testing
5.3.2.3(Rated impulse withstand voltage)	-	0	Only for internal testing
5.3.3(Currents)	-	0	Only for internal testing
5.3.3.2(Conventional free air thermal current)	-	0	Only for internal testing
5.3.3.3(Conventional enclosed thermal current)	-	0	Only for internal testing
5.3.3.4(Rated operational current (Ie) or rated operational power)	-	0	Only for internal testing
5.3.3.5(Rated uninterrupted current)	-	0	Only for internal testing
5.3.4(Rated frequency)	-	0	Only for internal testing
5.3.5(Rated duty)	-	0	Only for internal testing
5.3.5.2(Eight-hour duty)	-	0	Only for internal testing
5.3.5.3(Uninterrupted duty)	-	0	Only for internal testing
5.3.6.1(Ability to withstand motor switching overload currents)	-	0	Only for internal testing
5.3.6.2(Rated making capacity)	-	0	Only for internal testing
5.3.6.3(Rated breaking capacity)	-	0	Only for internal testing
5.3.7(Short-circuit characteristics)	-	0	Only for internal testing
5.3.7.1(Rated short-time withstand current)	-	0	Only for internal testing
5.3.7.2(Rated short-circuit making capacity)	-	0	Only for internal testing
5.3.7.4(Rated conditional short-circuit current)	-	0	Only for internal testing
5.4(Utilization category)	-	0	Only for internal testing
5.5(Control circuits)	-	0	Only for internal testing
5.6(Auxiliary circuits)	-	0	Only for internal testing
5.7(Relays and releases)	-	0	Only for internal testing
5.8(Co-ordination with short-circuit protective devices (SCPD))	-	0	Only for internal testing
6.2.2(Marking)	-	0	Only for internal testing
6.3(Instructions for installation, operation and maintenance, decommissioning and dismantling)	-	0	Only for internal testing
7(Normal service, mounting and transport conditions)	-	0	Only for internal testing
8.1.1(General)	-	0	Only for internal testing
8.1.2.2(Glow wire testing)	-	60000	Only for internal testing
8.1.7.1(General)	-	0	Only for internal testing
8.2.1(Operating conditions)	-	20000	Only for internal testing
8.2.1.1(General)	-	0	Only for internal testing
8.2.2(Temperature-rise)	-	25000	Only for internal testing
8.2.3(Dielectric properties)	-	20000	Only for internal testing
8.2.3.2(Impulse withstand voltage)	-	15000	Only for internal testing
8.2.3.3(Power-frequency or DC withstand voltage of the main, auxiliary and control circuits)	-	0	Only for internal testing
8.2.4(Ability to make and break under no-load, normal load and overload conditions)	-	50000	Only for internal testing
8.2.4.1(Making and breaking capacities)	-	50000	Only for internal testing
8.2.4.2(Operational performance)	-	100000	Only for internal testing
8.2.4.3(Mechanical durability)	-	90000	Only for internal testing
8.2.4.4(Electrical durability)	-	90000	Only for internal testing
8.2.5(Ability to make, break or withstand short-circuit currents)	-	200000	Only for internal testing as per each rating
8.2.7(Additional performance requirements for equipment suitable for isolation)	-	0	Only for internal testing
8.2.9(Overload requirements for equipment incorporating fuses)	-	0	Only for internal testing
9.1.3.2(Mechanical operation test)	-	90000	Only for internal testing
9.1.3.3(Dielectric test)	-	65000	Only for internal testing
9.1.5Special tests(Special tests)	-	100000	Only for internal testing
9.2(Compliance with constructional requirements)	-	40000	Only for internal testing
9.3.4.2(Temperature-rise)	-	25000	Only for internal testing
9.3.4.3(Test of dielectric properties)	-	65000	Only for internal testing
9.3.4.4(Making and breaking capacities)	-	60000	Only for internal testing
9.3.4.4.3(Characteristics of transient recovery voltage)	-	0	Only for internal testing
9.3.4.5(Dielectric verification)	-	28000	Only for internal testing
9.3.4.6(Leakage current)	-	25000	Only for internal testing
9.3.5.2(Operational performance test)	-	50000	Only for internal testing
9.3.6.2(Short-time withstand current test)	-	200000	Only for internal testing as per each rating
9.3.6.3(Short-circuit making capacity test)	-	200000	Only for internal testing as per each rating
9.3.7.3(Fuse protected short-circuit withstand)	-	200000	Only for internal testing as per each rating
9.3.8.2(Overload test)	-	60000	Only for internal testing
9.3.9.2(Determination of critical load current)	-	50000	Only for internal testing
9.5.2(Mechanical durability)	-	40000	Only for internal testing
9.5.3(Electrical durability)	-	70000	Only for internal testing
8.1.7.2(Additional constructional requirements)	-	40000	Only for internal testing
8.1.9(Additional requirements for equipment provided with a neutral pol)	-	40000	Only for internal testing
9.3.4.7(Temperature-rise verification)	-	25000	Only for internal testing
9.3.4.8(Strength of actuator mechanism)	-	20000	Only for internal testing
9.3.5.3(Dielectric verification)	-	30000	Only for internal testing
9.3.5.5(Temperature-rise verification)	-	25000	Only for internal testing
9.3.6.4(Dielectric verification)	-	30000	Only for internal testing
9.3.6.6(Temperature-rise verification)	-	25000	Only for internal testing
9.3.7.4(Dielectric verification)	-	30000	Only for internal testing
9.3.7.6(Temperature-rise verification)	-	25000	Only for internal testing
9.3.8.3(Dielectric verification)	-	30000	Only for internal testing
9.3.8.5(Temperature-rise verification)	-	25000	Only for internal testing
9.3.5.4(Leakage current)	-	25000	Only for internal testing
9.3.6.5(Leakage current)	-	25000	Only for internal testing
9.3.7.5(Leakage current)	-	25000	Only for internal testing
9.3.8.4(Leakage current)	-	25000	Only for internal testing
9.1.3.2(Mechanical operation test)	-	70000	Only for internal testing

07 Aug, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Havells India Limited (Havells Research & Development Laboratory)

Plot No. 6, Site-IV, Industrial Area, Sahibabad, Ghaziabad, Uttar Pradesh, 201010

9958238383 satyabrata.tripathy@havells.com

Scope List