Indianoil Corporation Ltd (IOCL),Northeast Region Smart Laboratory, Betkuchi

Betkuchi Terminal Sawkuchi, Guwahati, Kamrup Metro, Assam, 781034
9888688955 nihard@indianoil.in
Scope List
Reset
8 Results
S.No. Indian Standard No. Product Grade / Type / Size / Designation etc. Testing Charges (Excl. Of Taxes) Validity Date Remark
1 IS 1593 (2018) Fuel oils - Specification (Third Revision) LV Grade, MV1 Grade, MV2 Grade & HV Grade 19760 View breakup
-
13 Oct, 2028 -
Exclusions: 4.1 (General) 4.3 (Asphaltene Content) 4.5 (Spot Test) 4.6-Table 1-iii) (Carbon residue, mass percent, Max) 5.1 (Packing) 5.2 (Marking) 4.6-Table 1-ii) (Ash, percent by mass, Max)
2 IS 1459 (2018) Kerosene - Specification (Fourth Revision) - 14170 View breakup
-
13 Oct, 2028 -
Scope restricted to dyed kerosene Exclusions: 4.2-Table 1-ii) (Acidity, inorganic) 4.2-Table 1-iii) (Burning quality) a)Char Value, mg/kg of oil consumed, Max b)Bloom on glass Chimney) 5.1 (Packing) 5.2 (Marking) 4.2-Table 1-iv) (Colour a)Saybolt (in case of undyed Kerosene)
3 IS 2796 (2017) Motor gasoline - Specification (Sixth Revision) - 50960 View breakup
-
13 Oct, 2028 -
Exclusions: Cl-4.1.2 (Antioxidants) Cl-4.1.3 (Metal Deactivators) Cl-4.1.5 (Motor gasoline multifunctional additives (MFA),) Cl-4.2.1 (Organic Oxygenates- Permitted Components) Cl-4.3 (Other Requirements) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), b) ("Colour: MG 95") Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (b) (Research octane number (RON), Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (a) (Motor octane number (MON),Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (b) (Motor octane number (MON),Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ix) (Lead content (as Pb ), g/l, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (a) (Reid vapour pressure (RVP) at 38°C, kPa , Max: MG(without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (b) (Reid vapour pressure (RVP) at 38°C, kPa , Max: Ethanol blended MG) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (a) (Vapour lock index (VLI),Max :- MG (without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (b) (Vapour lock index (VLI),Max :- MG (with 5 percent v/v ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (c) (Vapour lock index (VLI),Max :- E10) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xii) (Benzene content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (a) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Winter, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (b) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Other months, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xv) (Engine intake system cleanliness) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (a) (Olefin content, percent by volume, Max: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (b) (Olefin content, percent by volume, Max :MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvii) (Oxidation stability, minutes, Min) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xviii) (Aromatics content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Oxygen content, percent by mass, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xxi) (Oxygenates percent by volume, Max:- Ethers containing or more ‘C’ atoms per molecules such as MTBE, ETBE or TAME) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xxi) (Oxygenates percent by volume, Max) Cl-5.2 (Marketing) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Ethanol content, percent by volume: a) Motor gasoline)
4 IS 73 (2013) Paving bitumen - Specification (Fourth Revision) - 217740 View breakup
-
13 Oct, 2028 -
Exclusion: 6.2 Table 1 (Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 20 ) 6.2 Table 1 (Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 30 ) 6.2 Table 1 (Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 40 ) 6.2 Table 1 (Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm VG 10 ) 6.2 Table 1 (Tests on residue from rolling thin film oven test:a) Viscosity ratio at 60°C, All Grades) 6.1 (Description) 6.2 Table 1 (Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 40 )
5 IS 15607 (2022) Biodiesel B-100 - Fatty Acid Methyl Esters FAME Specification Second Revision - 22290 View breakup
-
13 Oct, 2028 -
Exclusion: 4.4 (Polyunsaturated (>4 double bonds) methyl ester - EN 15779) 4.4 (Linolenic acid methyl ester - EN14103) 4.4 (Oxidation stability, at 110°C - EN 14112 / EN 15751) 4.4 (Iodine value - EN 14111) 4.4 (Calcium +Magnesium - EN14538) 4.4 (Sodium + Potassium - EN14538) 4.4 (Phosphorous - ASTM D4951 / EN 14107) 4.4 (Total Glycerol - ASTM D6584 / EN 14105) 4.4 (Free Glycerol - ASTM D6584 / EN 14105) 4.4 (Triglyceride content - ASTM D6584 / EN 14105) 4.4 (Diglyceride content - ASTM D6584 / EN 14105) 4.4 (Monoglyceride content - ASTM D6584 / EN 14105) 4.4 (Ester content - EN 14103) 4.4 (Methanol - EN 14110) 4.4 (Cetane No. - IS 1448 P:9 / ISO 5165) 4.4 (Total contamination - EN 12662) 4.4 (Sulfated ash - ISO 3987) 4.4 (Carbon Residue (Ramsbottom) - ASTM D 4530 / ISO 10370)
6 IS 15464 (2022) ANHYDROUS ETHANOL FOR USE AS BLENDING COMPONENT IN MOTOR GASOLINE SPECIFICATION First Revision - 14950 View breakup
-
13 Oct, 2028 -
Exclusion : 4.1 (Description) 4.2 (Denaturant) 4.4-Table 1-v) (Higher saturated alcohols (C3-C5), percent, v/v, Max) 4.4-Table 1-vi) (Boiling point, °C, Min.) 4.4-Table 1-vii) (Residue on evaporation, percent by mass, Max.) 4.4-Table 1-xi) (Electrical conductivity, µS/m, Max) 4.4-Table 1-xii) (Copper, mg/kg, Max.) 4.4-Table 1-xiii) (pHe) 4.4-Table 1-xiv) (Inorganic chloride, mg/kg, Max.) 4.4-Table 1-xvi) (Sulphate content, mg/kg Max.)
7 IS 17021 (2018) E 20 fuel - Admixture of anhydrous ethanol and gasoline - As fuel for spark ignited engine powered vehicles - Specification - 32110 View breakup
-
13 Oct, 2028 -
Exclusion: 4.2-Table 1-vi) (Motor Octane Number (MON), Min) 4.2-Table 1-ix) (Lead Content (as Pb), g/l, Max) 4.2-Table 1-x) (Reid Vapour pressure at 38°C, kPa, Max) 4.2-Table 1-xi) (Vapour Lock Index (VLI), Max a) Summer) b) Other Months) 4.2-Table 1-xii) (Benzene content, percent by volume, Max) 4.2-Table 1-xv) (Engine intake system cleanliness) 4.2-Table 1-xvi) (Olefin content, percent by volume, Max) 4.2-Table 1-xvii) (Oxidation stability, minutes, Min) 4.2-Table 1-xviii) (Aromatic content), percent by volume, Max) 4.2-Table 1-xix) (Oxygen content, percent by mass, Max) 4.2-Table 1-xxi) (Oxygenates percent by volume, Max a) Ethers containing 5 or more “C” atoms per molecules such as MTBE, ETBE or TAME b) Any other oxygenates) 4.5 (Phosphorous) 4.2-Table 1-xiv) (Water tolerance of gasoline-alcohol blends, temperature for phase separation, °C, Max a) other months b) Winter3)) 4.1 (Description) 4.3 (Ethanol Content) 4.4 (Organic Oxygenates) 6.1 (Packing) 6.2 (Marking)
8 IS 1460 (2025) Automotive Diesel Fuel - Specification (seventh revision) - 50870 View breakup
-
13 Oct, 2028 -
Exclusion: Cl-3.2 (Composition) Cl-3.1.4 , 3.2, Table-1 (iii) (Ash, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (iv) (Carbon residue, on 10 percent residue1, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (v) (Cetane number, Min) Cl-3.1.4 , 3.2, Table-1 (xii) (Total contamination, mg/kg, Max) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability, g/m3, Max) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability, minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), hours, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xix) (Polycyclic Aromatic Hydrocarbon (PAH), percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (xx) (Lubricity, wear scar diameter (wsd) at 60 ºC, μm, Max) Cl-3.1.4 , 3.2, Table-1 (xxi) (FAME content, percent v/v, Max) Cl-5.2 (Marking)

Designed, Developed and Maintained by:

Arohatech IT Services (P) Ltd.

Contact for any query/support: supportlims@bis.gov.in