BIS - LIMS (Laboratory Information Management System)

Indianoil Corporation Ltd (IOCL), Southern Region Smart Laboratory

KORUKKUPET TERMINAL, KATHIVAKKAM HIGH ROAD, KORUKKUPET, CHENNAI, Chennai, Tamil Nadu, 600021

9486471332 adennis@indianoil.in

Scope List

Reset

9 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 17021 (2018)

E 20 fuel - Admixture of anhydrous ethanol and gasoline - As fuel for spark ignited engine powered vehicles - Specification

34790 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2-Table 1-i)(Appearance)	-	200	excluding GST
4.2-Table 1-ii)(Colour)	-	200	excluding GST
4.2-Table 1-iii)(Density at 15°C, kg/m3)	-	1130	excluding GST
4.2-Table 1-iv)(Distillation a) percent evaporated at 70 °C (E70 °C), percent v/v b) percent evaporated at 100 °C (E100 °C), percent v/v c) percent evaporated at 150 °C (E150 °C ), percent v/v, Min d) Final Boiling Point, °C, Max e) Residue, percent by volume, Max)	-	2650	excluding GST
4.2-Table 1-v)(Research Octane Number (RON), Min)	-	18210	excluding GST
4.2-Table 1-vii)(Gum content (Solvent washed), g/m3 , Max)	-	2070	excluding GST
4.2-Table 1-viii)(Total Sulphur, mg/kg, Max)	-	4710	excluding GST
4.2-Table 1-x)(Reid Vapour pressure at 38°C, kPa, Max)	-	1900	excluding GST
4.2-Table 1-xi)(Vapour Lock Index (VLI), Max a) Summer2) b) Other Months)	-	1900	excluding GST
4.2-Table 1-xiii)(Copper strip corrosion (3 h at 50 °C), Max)	-	1130	excluding GST
4.2-Table 1-xx)(Ethanol content6), percent, v/v)	-	690	excluding GST
4.3(Ethanol Content)	-	690	excluding GST
4.2-Table 1-xxiii (Amendment No.3)(Water content)	-	4760	excluding GST

26 Dec, 2028

-
4.1 (Description) 4.2-Table 1-ix) (Lead Content (as Pb), g/l, Max) 4.2-Table 1-ix) (Lead Content (as Pb), g/l, Max) 4.2-Table 1-vi) (Motor Octane Number (MON), Min) 4.2-Table 1-xii) (Benzene content, percent by volume, Max) 4.2-Table 1-xiv) (Water tolerance of gasoline-alcohol blends, temperature for phase separation, °C, Max a) other months b) Winter3)) 4.2-Table 1-xix) (Oxygen content, percent by mass, Max) 4.2-Table 1-xv) (Engine intake system cleanliness) 4.2-Table 1-xvi) (Olefin content, percent by volume, Max) 4.2-Table 1-xvii) (Oxidation stability, minutes, Min) 4.2-Table 1-xviii) (Aromatic content5), percent by volume, Max) 4.2-Table 1-xxi) (Oxygenates percent by volume, Max a) Ethers containing 5 or more “C” atoms per molecules such as MTBE, ETBE or TAME b) Any other oxygenates) 4.2-Table 1-xxii) (Motor Gasoline Content, percent, v/v) 4.4 (Organic Oxygenates) 4.5 (Phosphorous) 6.1 (Packing) 6.2 (Marking)

IS 1593 (2018)

Fuel oils - Specification (Third Revision)

23690 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Pour Point)	-	1900	Excluding GST
4.3(Asphaltene Content)	-	2160	Excluding GST
4.6-Table 1-ii)(Ash, percent by mass, Max)	-	2070	Excluding GST
4.6-Table 1-iii)(Carbon residue, mass percent, Max)	-	1900	Excluding GST
4.6-Table 1-iv)(Gross, calorific value)	-	780	Excluding GST
4.6-Table 1-v)(Density at 15°C kg/m3or Relative density at 15.6/15.6°C)	-	1130	Excluding GST
4.6-Table 1-vi)(Flash point (Pensky Martens (closed), °C, Min)	-	1900	Excluding GST
4.6-Table 1-vii)(Kinematic viscosity in centistokes at 50°C)	-	2270	Excluding GST
4.6-Table 1-viii)(Sediment, percent by mass, Max)	-	1740	Excluding GST
4.6-Table 1-ix)(Sulphur, total, percent by mass, Max2))	-	2650	Excluding GST
4.6-Table 1-x)(Water content, percent by volume, Max)	-	1130	Excluding GST
4.6-Table 1-i)(Acidity, inorganic)	-	960	Excluding GST
4.4(TOTAL SEDIMENT)	-	3100	Excluding GST

26 Dec, 2028

-
4.1 (General) 4.5 (Spot Test) 5.1 (Packing) 5.2 (Marking)

IS 16861 (2018)

High flash high speed diesel fuel - Specification

25770 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.3-Table 1-i)(Appearance)	-	200	excluding GST
3.3-Table 1-iii)(Ash, percent by mass, Max)	-	2070	excluding GST
3.3-Table 1-iv)(Carbon residue on the 10 percent Volume Distillation Residue, mass %, Max)	-	1900	excluding GST
3.3-Table 1-v)(Cetane index1), Min)	-	3780	excluding GST
3.3-Table 1-vi)(Pour Point2), Max a) Winter b) Summer)	-	1900	excluding GST
3.3-Table 1-vii)(Copper strip Corrosion for 3 h at 100°C)	-	1130	excluding GST
3.3-Table 1-viii)(Distillation, percent (v/v), recovered a) at 350°C, Min b) at 370°C Min)	-	2650	excluding GST
3.3-Table 1-ix)(Flash Point Pensky Martens closed cup °C, Min)	-	1900	excluding GST
3.3-Table 1-x)(Kinematic viscosity, cSt, at 40°C)	-	2270	excluding GST
3.3-Table 1-xi)(Density3) at 15°C, kg/m3 , Max)	-	1130	excluding GST
3.3-Table 1-xii)(Total sulphur4), % by mass, Max)	-	2650	excluding GST
3.3-Table 1-xiii)(Water content, ppm, max.)	-	4160	excluding GST

26 Dec, 2028

-
3.1 (General) 3.2 (Composition) 3.3-Table 1-ii) (Acid Number, mg KOH/g, Max) 3.3-Table 1-xiv) (Cold filter plugging point (CFPP), °C) 3.3-Table 1-xv) (Oxidation Stability5), g/m3 , Max) 3.3-Table 1-xvi) (Lubricity6), Corrected WSD at 60°C, microns max) 5.1 (Packing) 5.2 (Marking)

IS 1459 (2018)

Kerosene - Specification (Fourth Revision)

11920 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2-Table 1-i)(Appearance)	-	200	excluding GST
4.2-Table 1-iv)(Colour a)Saybolt (in cas of undyedKerosene)3), Min b)Visual (in case of dyed Kerosene))	-	1130	excluding GST
4.2-Table 1-v)(Copper strip corrosion for 3 h at 50°C)	-	1130	excluding GST
4.2-Table 1-vi)(Density at 15°C, kg/m3)	-	1130	excluding GST
4.2-Table 1-vii)(Distillation a)Percent recovered below200°C, percent (v/v), Min b)Final boiling point, °C, Max )	-	2650	excluding GST
4.2-Table 1-viii)(Flash point ( Abel), °C, Min)	-	1900	excluding GST
4.2-Table 1-ix)(Smoke Point4), mm, Min)	-	1130	excluding GST
4.2-Table 1-x)(Total Sulphur Content, percent, m/m, Max)	-	2650	excluding GST

26 Dec, 2028

-
4.2-Table 1-iii) (Burning quality2) a)Char Value, mg/kg of oil consumed, Max b)Bloom on glass Chimney) 5.1 (Packing) 5.2 (Marking) 4.2-Table 1-ii) (Acidity, inorganic)

IS 1604 (2022)

Aviation gasoline - Specification (fifth revision)

18940 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.2-Table 1-i(Appearance)	-	200	excluding GST
4.1.2-Table 1-iv(Copper strip corrosion for 2 h at 100°C)	-	1130	excluding GST
4.1.2-Table 1-v(Density at 15°C, kg/m3)	-	1130	excluding GST
4.1.2-Table 1-vi(Distillation)	-	2650	excluding GST
4.1.2-Table 1-viii(Existent gum, mg/100 ml, Max)	-	2070	excluding GST
4.1.2-Table 1-ix(Freezing point, °C, Max)	-	2270	excluding GST
4.1.2-Table 1-xi(Oxidation stability, 16 h: a) Potential gum, mg/100 ml, Max b) Precipitate, mg/100 ml, Max)	-	1900	excluding GST
4.1.2-Table 1-xii(Reid vapour pressure at 38°C, kPa)	-	1900	excluding GST
4.1.2-Table 1-xiv(Total sulphur percent m/m, Max)	-	4710	excluding GST
4.1.2-Table 1-xvi(Water reaction: Volume change, ml, Max)	-	780	excluding GST
4.1.2-Table 1-ii(Colour, visual)	-	200	excluding GST

26 Dec, 2028

-
4 (Requirements) 4.1 (General) 4.1.2-Table 1-ii (Colour, visual) 4.1.2-Table 1-iii (Colour- Lovibond) 4.1.2-Table 1-vii (Electrical conductivity, pS/m) 4.1.2-Table 1-x (Knock rating: a) Lean mixture,motor method,octane number, Min b) Research, octane number, Min c) Performance number, Min) 4.1.2-Table 1-xiii (Specific energy MJ/kg, Min) 4.1.2-Table 1-xv (Tetraethyl lead, g Pb/l at 15°C, Max) 4.2 (Composition) 4.2.1 (Composition- Materials) 4.2.2.1 (Additives-Anti-oxidants) 4.2.2.2 (Antiknock additive) 4.2.2.3 (Static Dissipater Additive (SDA)) 4.2.2.4 (Dye (grade identification)) 4.2.2.5 (Fuel system icing inhibitor (FSII)) 4.2.2.6 (Corrosion inhibitor additive) 5 (Sampling) 6 (Packing and Marking)

IS 1587 (2017)

Aviation turbine fuel, high flash point type - Specification (Fourth Revision)

32220.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2-Table 1-i)(Appearance a) Visual appearance)	-	200	excluding GST
3.2-Table 1-ii)(Composition a) Total acidity, mg KOH /g, Max)	-	1140	excluding GST
3.2-Table 1-iii)(Volatility a) Distillation 1. Initial boiling point, °C)	-	2650	excluding GST for all distillation parameters (IBP, 10%,50%, 90%, FBP, Residue & Loss %)
3.2-Table 1-iv)(Fluidity a) Freezing point, °C)	-	2270	excluding GST
3.2-Table 1-v)(Combustion a) Specific energy, MJ/kg,Min)	-	2480	excluding GST2470
3.2-Table 1-vi)(Corrosion a) Copper strip corrosion for 2 hrs at 100 °C)	-	1130	excluding GST
3.2-Table 1-viii)(Contaminants a) Existent Gum, mg/100 ml, Max)	-	2070	excluding GST
3.2-Table 1-i)(Appearance b) Colour)	-	200	excluding GST
3.2-Table 1-ii)(Composition b) Aromatics, % v/v)	-	2650	excluding GST
3.2-Table 1-ii)(Composition d) Sulphur Mercaptan, % m/m)	-	1900	excluding GST
3.2-Table 1-ii)(Composition c) Total Sulphur, % m/m)	-	4710	excluding GST
3.2-Table 1-ii)(Composition e) Doctor test)	-	400	excluding GST
3.2-Table 1-iii)(Volatility a) Distillation 2. 10 percent v/ v Recovery at, °C)	-	2650	excluding GST for all distillation parameters (IBP, 10%,50%, 90%, FBP, Residue & Loss %)
3.2-Table 1-iii)(Volatility a) Distillation 3. 50 percent v/ v Recovery at, °C)	-	2650	excluding GST for all distillation parameters (IBP, 10%,50%, 90%, FBP, Residue & Loss %)
3.2-Table 1-iii)(Volatility a) Distillation 4. 90 percent v/ v Recovery at, °C)	-	2650	excluding GST for all distillation parameters (IBP, 10%,50%, 90%, FBP, Residue & Loss %)
3.2-Table 1-iii)(Volatility a) Distillation 5. Final Boiling Point, °C)	-	2650	excluding GST for all distillation parameters (IBP, 10%,50%, 90%, FBP, Residue & Loss %)
3.2-Table 1-iii)(Volatility a) Distillation 6. Residue, % v / v)	-	2650	excluding GST for all distillation parameters (IBP, 10%,50%, 90%, FBP, Residue & Loss %)
3.2-Table 1-iii)(Volatility a) Distillation 7. Loss, % v / v)	-	2650	excluding GST for all distillation parameters (IBP, 10%,50%, 90%, FBP, Residue & Loss %)
3.2-Table 1-iii)(b. Flash point (PMCC), °C)	-	1900	Excluding GST
3.2-Table 1-iii)(c. Density at 15°C)	-	1130	Excluding GST
3.2-Table 1-iv(Fluidity b) Kinematic viscosity at – 20 °C)	-	2270	Excluding GST
3.2-Table 1-vi)(Combustion b) Smoke point)	-	1130	Excluding GST
3.2-Table 1-v)(Combustion Naphthalenes, % v / v)	-	2650	Excluding GST
3.2-Table 1-vi)(Corrosion b) Silver strip corrosion)	-	1340	Excluding GST

26 Dec, 2028

-
1 (Lubricity Wear scar diameter, mm,Max) 1 (Marking) 1 (Packing) 3.2-Table 1-i) (Appearance c)Particulate contamination at point of manufacture, mg/l) 3.2-Table 1-i) (Appearance d) Particulate at point of manufacture. Cumulative channel particle counts) 3.2-Table 1-iii) (f) Refining component at point of manufacture 1. Hydro processed component, % vol) 3.2-Table 1-iii) (f) Refining component at point of manufacture 2. Severely hydro processed component, % vol) 3.2-Table 1-vii) (Thermal Stability JFTOT at control temperature of 260 °C a) Filter pressure differential, mm Hg, Max) 3.2-Table 1-vii) (Thermal Stability JFTOT at control temperature of 260 °C b) Tube rating) 3.2-Table 1-viii) (Contaminants b) Microseparometer rating at the point of manufacture and before addition of LIA) 3.2-Table 1-viii) (Lubricity: Wear scar diameter)

IS 1571 (2018)

Aviation turbine fuels, kerosine type, jet - A - 1 - Specification (Tenth Revision)

33200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.2.2, 3.2.6, Table-1 (a)(Visual appearance)	-	200	excluding GST
Cl-3.2.2, 3.2.6, Table-1 (B)(Colour)	-	1130	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (ii) (a)(Total acidi,t y mg KOHM/ga, x)	-	1530	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (ii) (b)("Aromatics, percent by volMumaex, or Total Aromatics, percent by volume, Max")	-	2650	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (ii) (c)(Total sulphur percent by mass, Max)	-	2650	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (ii) (d)(Sulphur mercaptan, percent m/m. Max)	-	1900	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 1)(Distillation:- Initial boiling point, °)	-	2650	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 2)(Distillation:- 10 percent recovery °Cv/,v , Max)	-	2650	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 3)(Distillation:- 50 percent recovery °C, v/v)	-	2650	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 3)(Distillation:- 50 percent recovery °C, v/v)	-	2650	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 4)(Distillation:- 90 percent recovery °C, v/v)	-	2650	excluding GST
Cl-3.2.2, 3.2.6, Table- 1, (iii) (a), 5)(Distillation:- Final boiling point,°C, Max)	-	2650	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 6)(Distillation:- Residue, percent v/v, Max)	-	2650	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 7)(Distillation:- Loss, percent v/v, Max)	-	2650	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (iii) (b)(Flash point ( Abel ), °C, Min)	-	1900	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (iii) (c)(Density at 15°C,kg/m3)	-	1130	excluding GST
Cl-3.2.2, 3.2.6, Table- 1, (iv) (a)(Fluidity:- Freezing point, °C, Max)	-	2270	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (iv) (b)(Fluidity:- Kinematic viscosity at minus 20°C, mm2/s, Max)	-	2270	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (v) (a)(Specific energy10) MJ/kg, Min)	-	2480	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (v) (b)(Smoke point, mm, Min or)	-	1130	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (v) (b) 2)(Naphthalenes, percent v/v, Max)	-	2650	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (vi) (a)(Copper strip corrosion for 2 h at 100°C)	-	1130	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (vi) (b)("Silver stripcorrosion12) classification, for 4 h at 50°C, Max")	-	1340	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (viii)(Contaminants: Existent gum, mg/100 ml, Max)	-	2070	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (ix) a)(Water reaction: Interface rating16), Max)	-	780	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (x)(Conductivity: Electrical conductivity, pS/m19))	-	1340	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (ii) (b)(Aromatics, percent by vol (Defense requirements))	-	2650	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (ii) (c)(Total sulphur percent by mass, Max (Defense requirements))	-	2650	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (ii) (d)(Sulphur mercaptan, percent m/m. (Defense requirements))	-	1900	excluding GST
Cl-3.2.2, 3.2.6, Table-1, (vi) (b)(Silver stripcorrosion12) classification, for 4 h at 50°C, (Defense requirements))	-	1340	excluding GST
Amendment No.5 Table 3 Clause G-2.5 ii(Fluidity-Freezing point)	-	2270	excluding GST
Amendment No.5 Table 3 Clause G-2.5 iii(Aromatics)	-	2650	excluding GST
Amendment No.5 Table 3 Clause G-2.5 iv(Volatility- Distillation-T50 to T10, ℃)	-	2650	excluding GST
Amendment No.5 Table 3 Clause G-2.5 iv(Volatility- Distillation-T90 to T10, ℃)	-	2650	excluding GST

26 Dec, 2028

-
Amendment No.5 Table 3 Clause G-2.5 i (Annex B VTR) Amendment No.5 Table 3 Clause G-2.5 i (Annex C ITR or Annex D ETR, average over an area of 2.5 mm2) Amendment No.5 Table 3 Clause G-2.5 i (Pressure differential) Amendment No.5 Table 3 Clause G-2.5 i (Test temperature for 2.5 h) Amendment No.5 Table 3 Clause G-2.5 i (Thermal stability) Amendment No.5 Table 3 Clause G-2.5 i (Tube Rating) Amendment No.5 Table 3 Clause G-2.5 ii (Fluidity-Freezing point) Amendment No.5 Table 3 Clause G-2.5 ii (Fluidity-Viscosity at - 40 ℃) Amendment No.5 Table 3 Clause G-2.5 iii (Aromatics) Amendment No.5 Table 3 Clause G-2.5 iv (Volatility- Distillation-T50 to T10, ℃) Amendment No.5 Table 3 Clause G-2.5 iv (Volatility- Distillation-T90 to T10, ℃) Amendment No.5 Table 3 Clause G-2.5 v (Lubricity) Amendment No.5 Table 3 Clause G-2.5 vi (Unconverted fatty acid esters and fatty acids) Cl-3.1 (General-Material) Cl-3.2 (Composition) Cl-3.2.1 (Antioxidants) Cl-3.2.2 (Metal Deactivator Additive (MDA)) Cl-3.2.2, 3.2.6, Table- 1, (xi) (Lubricity: Wear scar diameter, mm (defense requirements)) Cl-3.2.2, 3.2.6, Table- 1, (xi) (Lubricity: Wear scar diameter, mm, Max) Cl-3.2.2, 3.2.6, Table-1 (c) (Particulate contamination, at point of 1.02) manufacture, mg/l, Max) Cl-3.2.2, 3.2.6, Table-1 (d) 1) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥ 4 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 2) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥6 μm(c) Cl-3.2.2, 3.2.6, Table-1 (d) 3) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥14 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 4) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥21 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 5) (Particulate, at point of manufacture, cumulative channel particle counts:-≥25 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 6) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥30 μm©) Cl-3.2.2, 3.2.6, Table-1, (ii) (e) (Doctor Test) Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 1) ("Refining components, at the point of manufacture8) :- Non Hydro processed Components, percent v/v") Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 2) ("Refining components, at the point of manufacture8) :- Mildly Hydro processed Components, percent v/v") Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 3) ("Refining components, at the point of manufacture8) :- Severely Hydro processed Components, percent v/v") Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 4) ("Refining components, at the point of manufacture8) :- Synthetic Components, percenvt/ v") Cl-3.2.2, 3.2.6, Table-1, (ix) b), 1) ("Micro-separometer rating18) at the point of manufacture: - MSEP without SDA, Min") Cl-3.2.2, 3.2.6, Table-1, (ix) b), 2) ("Micro-separometer rating18) at the point of manufacture: MSEP with SDA, Min") Cl-3.2.2, 3.2.6, Table-1, (vii) (a) (Filter pressure differential, mm Hg, Max) Cl-3.2.2, 3.2.6, Table-1, (vii) (b) 1) (Tube rating, visual (VTR)) Cl-3.2.2, 3.2.6, Table-1, (vii) (b) 2) (ITR or ETR, average over area of 2.5 mm2 in nm) Cl-3.2.2, 3.2.6, Table-1, (xii) (Identified Incidental Materials :- Fatty Acid Methyl Ester, mg/kg, Max) Cl-3.2.3 (Static Dissipater Additive (SDA)) Cl-3.2.4 (Lubricity Improver Additive (LIA)) Cl-3.2.5 (Fuel System Icing Inhibitor (FSII)) Cl-3.2.7 (Leak Detection Additive) Cl-5.2 (Marking)

IS 1460 (2025)

Automotive Diesel Fuel - Specification (seventh revision)

15890 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1.4 , 3.2, Table-1 (i)(Appearance)	-	200	Excluding GST for all parameters
Cl-3.1.4 , 3.2, Table-1 (vi)(Cetane index, Min)	-	3780	Excluding GST
Cl-3.1.4 , 3.2, Table-1 (xiii)(Density at 15 °C, kg/m3)	-	1130	Excluding GST
Cl-3.1.4 , 3.2, Table-1 (vii) (a)(Pour point3, °C, Max: Winter)	-	1900	Excluding GST
Cl-3.1.4 , 3.2, Table-1 (vii) (b)(Pour point3, °C, Max: Summer)	-	1900	Excluding GST
Cl-3.1.4 , 3.2, Table-1 (viii)(Copper strip corrosion for 3 h at 50 °C, Max)	-	1130	Excluding GST
Cl-3.1.4 , 3.2, Table-1 (ix)(Distillation, 95 percent v/v recovery, °C, Max)	-	2650	Excluding GST
Cl-3.1.4 , 3.2, Table-1 (x)(Flash point, Abel4, °C, Min)	-	1900	Excluding GST
Cl-3.1.4 , 3.2, Table-1 (xi)(Kinematic viscosity, mm2/s, at 40 °C)	-	2270	Excluding GST
Cl-3.1.4 , 3.2, Table-1 (xiv)(Total sulphur, mg/kg, Max)	-	4710	Excluding GST

26 Dec, 2028

-
Cl-3.1 (General- Requirements) Cl-3.1.4 , 3.2, Table-1 (ii) C (Total Acid Number (TAN), mg of KOH/g, Max) Cl-3.1.4 , 3.2, Table-1 (iii) (Ash, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (iv) (Carbon residue, on 10 percent residue1, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (v) (Cetane number, Min) Cl-3.1.4 , 3.2, Table-1 (xii) (Total contamination, mg/kg, Max) Cl-3.1.4 , 3.2, Table-1 (xix) (Polycyclic Aromatic Hydrocarbon (PAH), percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (xv) (Water content, mg/kg, Max) Cl-3.1.4 , 3.2, Table-1 (xvi) (a) (Cold Filter Plugging Point (CFPP)3, °C, Max: Winter) Cl-3.1.4 , 3.2, Table-1 (xvi) (a) (Cold Filter Plugging Point (CFPP)3, °C, Max: Winter) Cl-3.1.4 , 3.2, Table-1 (xvi) (b) (Cold Filter Plugging Point (CFPP)3, °C, Max: Summer) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability6, g/m3, Max) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability6, minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), hours, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xx) (Lubricity, wear scar diameter (wsd) at 60 ºC, μm, Max) Cl-3.1.4 , 3.2, Table-1 (xxi) (FAME content7, percent v/v, Max) Cl-3.2 (Composition) Cl-5.2 (Marking)

IS 2796 (2017)

Motor gasoline - Specification (Sixth Revision)

30300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (i)(Appearance)	-	200	excluding GST
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), a)("Colour: MG 91")	-	200	excluding GST
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), b)("Colour: MG 95")	-	200	excluding GST
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iii)(Density at 15°C, kg/m³)	-	1130	excluding GST
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: Motor gasoline)	-	2650	excluding GST
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: E10)	-	2650	excluding GST
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (b)(percent evaporated at 100°C (E 100 °C), percent v/v)	-	2650	excluding GST
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (c)(percent evaporated at 150°C (E 150 °C), percent v/v, Min)	-	2650	excluding GST
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (d)(Final boiling point, °C, Max)	-	2650	excluding GST
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (e)(Residue, percent by volume, Max)	-	2650	excluding GST
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (a)(Research octane number (RON), Min: MG 91)	-	18210	excluding GST
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (b)(Research octane number (RON), Min: MG 95)	-	18210	excluding GST
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vii)(Gum content (Solvent washed), g/m3, Max)	-	2070	excluding GST
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (viii)(Total sulphur, mg/kg, Max)	-	4710	excluding GST
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (a)(Reid vapour pressure (RVP) at 38°C, kPa , Max: MG(without ethanol))	-	1900	excluding GST
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (b)(Reid vapour pressure (RVP) at 38°C, kPa , Max: Ethanol blended MG)	-	1900	excluding GST
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (a)(Vapour lock index (VLI),Max :- MG (without ethanol))	-	1900	excluding GST
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiii)(Copper strip corrosion, for 3 h at 50°C, Max)	-	1130	excluding GST
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a) Motor gasoline)	-	690	excluding GST
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a):- E10)	-	690	excluding GST

26 Dec, 2028

-
Cl-4.1 (General- Requirements) Cl-4.1.2 (Antioxidants) Cl-4.1.3 (Metal Deactivators) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ix) (Lead content (as Pb ), g/l, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Oxygen content, percent by mass, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (a) (Motor octane number (MON),Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (b) (Motor octane number (MON),Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (b) (Vapour lock index (VLI),Max :- MG (with 5 percent v/v ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (c) (Vapour lock index (VLI),Max :- E10) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xii) (Benzene content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (a) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Winter, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (b) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Other months, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xv) (Engine intake system cleanliness) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (a) (Olefin content, percent by volume, Max: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (b) (Olefin content, percent by volume, Max :MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvii) (Oxidation stability, minutes, Min) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xviii) (Aromatics content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max:- Ethers containing 5 or more ‘C’ atoms per molecules such as MTBE, ETBE or TAME) Cl-4.1.5 (Motor gasoline multifunctional additives (MFA),) Cl-4.2.1 (Organic Oxygenates- Permitted Components) Cl-4.3 (Other Requirements) Cl-5.2 (Markeing)

Bureau of Indian Standards

The National Standards Body of India

Indianoil Corporation Ltd (IOCL), Southern Region Smart Laboratory

KORUKKUPET TERMINAL, KATHIVAKKAM HIGH ROAD, KORUKKUPET, CHENNAI, Chennai, Tamil Nadu, 600021

9486471332 adennis@indianoil.in

Scope List