BIS - LIMS (Laboratory Information Management System)

Indian Oil Corporation Ltd (IOCL) Panipat Marketing Complex Laboratory

Indian Oil Corporation Ltd. Panipat Marketing Complex, Baholi, Panipat, Panipat, Haryana, 132140

9289901556 psanjayk@indianoil.in

Scope List

Reset

9 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 17021 (2018)

E 20 fuel - Admixture of anhydrous ethanol and gasoline - As fuel for spark ignited engine powered vehicles - Specification

E 20 fuel - Admixture of anhydrous ethanol and gasoline

12580 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2-Table 1-viii)(Total Sulphur, mg/kg, Max)	-	4710	-
4.2-Table 1-iii)(Density at 15°C, kg/m3)	-	1130	-
4.2-Table 1-xiii)(Copper strip corrosion (3 h at 50 °C), Max)	-	1130	-
4.2-Table 1-iv)(Distillation a) percent evaporated at 70 °C (E70 °C), percent v/v b) percent evaporated at 100 °C (E100 °C), percent v/v c) percent evaporated at 150 °C (E150 °C ), percent v/v, Min d) Final Boiling Point, °C, Max e) Residue, percent by volume, Max)	-	2650	-
4.3(Ethanol Content)	-	690	-
4.2-Table 1-vii)(Gum content (Solvent washed), g/m3 , Max)	-	2070	-
4.2-Table 1-i)(Appearance)	-	200	-
4.2-Table 1-xx)(Ethanol content6), percent, v/v)	-	690	-

06 Nov, 2028

-
Exclusion: 4.1 (Description) 4.2-Table 1-ii) (Colour) 4.2-Table 1-ix) (Lead Content (as Pb), g/l, Max) 4.2-Table 1-v) (Research Octane Number (RON), Min) 4.2-Table 1-vi) (Motor Octane Number (MON), Min) 4.2-Table 1-x) (Reid Vapour pressure at 38°C, kPa, Max) 4.2-Table 1-xi) (Vapour Lock Index (VLI), Max a) Summer2) b) Other Months) 4.2-Table 1-xii) (Benzene content, percent by volume, Max) 4.2-Table 1-xiv) (Water tolerance of gasoline-alcohol blends, temperature for phase separation, °C, Max a) other months b) Winter3)) 4.2-Table 1-xix) (Oxygen content, percent by mass, Max) 4.2-Table 1-xv) (Engine intake system cleanliness) 4.2-Table 1-xvi) (Olefin content, percent by volume, Max) 4.2-Table 1-xvii) (Oxidation stability, minutes, Min) 4.2-Table 1-xviii) (Aromatic content5), percent by volume, Max) 4.2-Table 1-xxi) (Oxygenates percent by volume, Max a) Ethers containing 5 or more “C” atoms per molecules such as MTBE, ETBE or TAME b) Any other oxygenates) 4.2-Table 1-xxii) (Motor Gasoline Content, percent, v/v) 4.2-Table 1-xxiii (Amendment No.3) (Water content) 4.4 (Organic Oxygenates) 4.5 (Phosphorous) 6.1 (Packing) 6.2 (Marking)

IS 73 (2013)

Paving bitumen - Specification (Fourth Revision)

Paving bitumen

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2 Table 1(Absolute viscosity at 60°C, VG 10 )	-	5460	-
6.2 Table 1(Absolute viscosity at 60°C , VG 20 )	-	5460	-
6.2 Table 1(Absolute viscosity at 60°C, VG 30 )	-	5460	-
6.2 Table 1(Absolute viscosity at 60°C, VG 40 )	-	5460	-
6.2 Table 1(Penetration at 25°C,VG 40 )	-	4240	-
6.2 Table 1(Penetration at 25°C, VG 30 )	-	4240	-
6.2 Table 1(Penetration at 25°C, VG 20)	-	4240	-
6.2 Table 1(Penetration at 25°C, VG 10 )	-	4240	-
6.2 Table 1(Softening point (R&B) , VG 10 )	-	3030	-
6.2 Table 1(Softening point (R&B) , VG 20 )	-	3030	-
6.2 Table 1(Softening point (R&B), VG 30 )	-	3030	-
6.2 Table 1(Softening point (R&B),VG 40 )	-	3030	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 10 )	-	4240	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 20 )	-	4240	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 30 )	-	4240	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 40 )	-	4240	-
6.2 Table 1(Solubility in trichloroethylene, All Grades)	-	3030	-
6.2 Table 1(Absolute viscosity at 60°C, VG 10 )	-	5460	-
6.2 Table 1(Absolute viscosity at 60°C , VG 20 )	-	5460	-
6.2 Table 1(Absolute viscosity at 60°C, VG 30 )	-	5460	-
6.2 Table 1(Absolute viscosity at 60°C, VG 40 )	-	5460	-
6.2 Table 1(Penetration at 25°C,VG 40 )	-	4240	-
6.2 Table 1(Penetration at 25°C, VG 30 )	-	4240	-
6.2 Table 1(Penetration at 25°C, VG 10 )	-	4240	-
6.2 Table 1(Softening point (R&B) , VG 10 )	-	3030	-
6.2 Table 1(Softening point (R&B) , VG 20 )	-	3030	-
6.2 Table 1(Softening point (R&B), VG 30 )	-	3030	-
6.2 Table 1(Softening point (R&B),VG 40 )	-	3030	-
6.2 Table 1(Penetration at 25°C, VG 20)	-	4240	-
6.2 Table 1(Absolute viscosity at 60°C, VG 10 )	-	5460	-
6.2 Table 1(Absolute viscosity at 60°C , VG 20 )	-	5460	-
6.2 Table 1(Absolute viscosity at 60°C, VG 30 )	-	5460	-
6.2 Table 1(Absolute viscosity at 60°C, VG 40 )	-	5460	-
6.2 Table 1(Penetration at 25°C,VG 40 )	-	4240	-
6.2 Table 1(Softening point (R&B) , VG 10 )	-	3030	-
6.2 Table 1(Penetration at 25°C, VG 30 )	-	4240	-
6.2 Table 1(Softening point (R&B) , VG 20 )	-	3030	-
6.2 Table 1(Softening point (R&B), VG 30 )	-	3030	-
6.2 Table 1(Penetration at 25°C, VG 20)	-	4240	-
6.2 Table 1(Solubility in trichloroethylene, All Grades)	-	3030	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 10 )	-	4240	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 20 )	-	4240	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 30 )	-	4240	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 40 )	-	4240	-
6.2 Table 1(Softening point (R&B),VG 40 )	-	3030	-
6.2 Table 1(Penetration at 25°C, VG 10 )	-	4240	-
6.2 Table 1(Solubility in trichloroethylene, All Grades)	-	3030	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 10 )	-	4240	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 20 )	-	4240	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 30 )	-	4240	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 40 )	-	4240	-

06 Nov, 2028

-
Exclusion: 6.1 (Description) 6.2 Table 1 (Flash point (Cleveland open cup), All Grades) 6.2 Table 1 (Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 20 ) 6.2 Table 1 (Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 30 ) 6.2 Table 1 (Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 40 ) 6.2 Table 1 (Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm VG 10 ) 6.2 Table 1 (Tests on residue from rolling thin film oven test:a) Viscosity ratio at 60°C, All Grades)

IS 11489 (1985)

Specification for heavy petroleum stock (Hps)

Low Sulfur Heavy Stock (LSHS)

10980 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2-Table 1-i)(Pour Point,°C,Max)	-	1900	-
3.2-Table 1-ii)(Flash point, PMCC, °C, Max)	-	1900	-
3.2-Table 1-iii)( Kinematic viscosity, mm2/s at 100°C, Max)	-	2270	-
3.2-Table 1-iv)(Relative Density,at 15°/15°C)	-	1130	-
3.2-Table 1-ix)(Sulphur Total percent by mass,Max)	-	2650	-
3.2-Table 1-x)(Water Content percent by volume, Max)	-	1130	-

06 Nov, 2028

-
Exclusion: 3.1 (General) 3.2-Table 1-v) (Gross Calorific Value) 3.2-Table 1-vi) (Acidity Inorganic) 3.2-Table 1-vii) (Ash Percent by mass,Max) 3.2-Table 1-viii) (Sediment percent by mass,Max) 4.1 (Packing) 4.2 (Marking)

IS 1593 (2018)

Fuel oils - Specification (Third Revision)

Furnace Oil & variants

9080 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6-Table 1-v)(Density at 15°C kg/m3or Relative density at 15.6/15.6°C)	-	1130	-
4.6-Table 1-vi)(Flash point (Pensky Martens (closed), °C, Min)	-	1900	-
4.6-Table 1-vii)(Kinematic viscosity in centistokes at 50°C)	-	2270	-
4.6-Table 1-ix)(Sulphur, total, percent by mass, Max2))	-	2650	-
4.6-Table 1-x)(Water content, percent by volume, Max)	-	1130	-

06 Nov, 2028

-
Exclusion: 4.1 (General) 4.2 (Pour Point) 4.3 (Asphaltene Content) 4.4 (TOTAL SEDIMENT) 4.5 (Spot Test) 4.6-Table 1-i) (Acidity, inorganic) 4.6-Table 1-ii) (Ash, percent by mass, Max) 4.6-Table 1-iii) (Carbon residue, mass percent, Max) 4.6-Table 1-iv) (Gross, calorific value) 4.6-Table 1-viii) (Sediment, percent by mass, Max) 5.1 (Packing) 5.2 (Marking)

IS 15770 (2021)

Heating Oil(LDO) - Specification

Light Diesel Oil (LDO)

10980 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2-Table 1-iv)(Pour Point, °C, Max a) Winter [November toFebruary (both months inclusive)], b) Summer (rest of the months in a year))	-	1900	-
3.2-Table 1-vi)(Flash point, Pensky Martens ,°C, Min)	-	1900	-
3.2-Table 1-vii)(Kinematic viscosity at 40 °C, mm2 /sec)	-	2270	-
3.2-Table 1-ix)(Density at 15 °C, Kg/m3)	-	1130	-
3.2-Table 1-x)(Water content, percent by volume, Max)	-	1130	-
3.2-Table 1-xi)(Total sulphur, percent by mass)	-	2650	-

06 Nov, 2028

-
Exclusion: 3.1 (General) 3.2-Table 1-i) (Acid number, mg KOH/gm, Max) 3.2-Table 1-ii) (Ash, percent by mass, Max) 3.2-Table 1-iii) (Carbon residue, on whole samples, percent by mass, Max) 3.2-Table 1-v) (Copper strip corrosion for 3 h at 100 °C) 3.2-Table 1-viii) (Sediment, percent by mass, Max) 5.1 (Packing) 5.2 (Marking)

IS 15464 (2022)

ANHYDROUS ETHANOL FOR USE AS BLENDING COMPONENT IN MOTOR GASOLINE SPECIFICATION First Revision

Anhydrous Ethanol

11020 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4-Table 1-xv)(Sulfur content, mg/kg, Max.)	-	4710	-
4.4-Table 1-i)(Appearance)	-	200	-
4.4-Table 1-viii)(Acidity (as CH3 COOH), mg/kg, Max.)	-	960	-
4.4-Table 1-iii)(Ethanol, percent, v/v, Min1)). (excluding denaturant))	-	1340	-
4.4-Table 1-x)(Aldehyde (as CH3 CHO) content, mg/l, Max)	-	1900	-
4.4-Table 1-ix)(Alkalinity, mg/kg, Max.)	-	400	-
4.4-Table 1-ii)(Relative density at 15.6/15.6 °C, Max)	-	1130	-
4.4-Table 1-xix)(Miscibility with water)	-	380	-

06 Nov, 2028

-
Exclusion: 4.1 (Description) 4.2 (Denaturant) 4.3 (Acidity) 4.4-Table 1 iv (Methanol) 4.4-Table 1-iv) (Ethanol, percent, v/v, Min1). (excluding denaturant)) 4.4-Table 1-v) (Higher saturated alcohols (C3-C5), percent, v/v, Max) 4.4-Table 1-vi) (Boiling point, °C, Min.) 4.4-Table 1-vii) (Residue on evaporation, percent by mass, Max.) 4.4-Table 1-xi) (Electrical conductivity, µS/m, Max) 4.4-Table 1-xii) (Copper, mg/kg, Max.) 4.4-Table 1-xiii) (pHe) 4.4-Table 1-xiv) (Inorganic chloride, mg/kg, Max.) 4.4-Table 1-xvi) (Sulphate content, mg/kg Max.) 4.4-Table 1-xvii) (Water content, percent v/v, Max.) 4.4-Table 1-xviii) (Hydrocarbons, percent v/v) 5.1 (Packing) 5.2 (Marking) 7.1 (Tests shall be conducted)

IS 15607 (2022)

Biodiesel B-100 - Fatty Acid Methyl Esters FAME Specification Second Revision

Bio Diesel (B-100)

18560 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4-Table 1-i)(Appearance, visual)	-	200	-
4.4-Table 1-iii)(Density at 15 °C, kg/m3)	-	1130	-
4.4-Table 1-iv)(Kinematic viscosity at 40 °C, cSt)	-	2270	-
4.4-Table 1-v)(Flash point (PMCC)1) °C, Min)	-	1900	-
4.4-Table 1-vi)(Total Sulphur, mg/kg, Max)	-	4710	-
4.4-Table 1-xi)(Copper strip corrosion, 3 h at 50 °C, Max)	-	1130	-
4.4-Table 1-xiii)(Acid value, mg KOH/g, Max)	-	960	-
4.4-Table 1-xxvi)(Cold filter plugging point (CFPP), °C Max a) summer 18 – Part 110 b) winter3))	-	1900	-
4.4-Table 1-ix)(Water content mg/kg, Max)	-	4160	-
4.4-Table 1-ii)(Colour, visual)	-	200	-

06 Nov, 2028

-
Exclusion: 4.1 (General) 4.2 (Additives) 4.3 (The materials shall be free from grit) 4.4-Table 1-ii) (Colour, visual) 4.4-Table 1-vii) (Carbon residue (MCR) 2) percent by mass, Max) 4.4-Table 1-viii) (Sulfated ash, percent by mass, Max) 4.4-Table 1-x) (Total contamination, mg/kg, Max) 4.4-Table 1-xii) (Cetane No., Min) 4.4-Table 1-xiv) (Methanol, percent by mass, Max) 4.4-Table 1-xix) (Free Glycerol percent by mass, Max) 4.4-Table 1-xv) (Ester content, percent by mass, Min) 4.4-Table 1-xvi) (Monoglycerides content, percent by mass, Max) 4.4-Table 1-xvii) (Diglyceride content, percent by mass, Max) 4.4-Table 1-xviii) (Triglyceride content, percent by mass, Max) 4.4-Table 1-xx) (Total Glycerol percent by mass, Max) 4.4-Table 1-xxi) (Phosphorous mg/kg, Max) 4.4-Table 1-xxii) (Sodium + Potassium mg/kg, Max) 4.4-Table 1-xxiii) (Calcium + Magnesium mg/kg, Max) 4.4-Table 1-xxiv) (Iodine value, gm iodine/100 gm, Max) 4.4-Table 1-xxv) (Oxidation stability, at 110 °C, Min hrs. Accelerated) 4.4-Table 1-xxvii) (Linolenic acid methyl ester, percent m/m, Max) 4.4-Table 1-xxviii) (Polyunsaturated (>_ 4 double bonds) methyl ester percent m/m, Max) 5.1 (Packing) 5.2 (Marking)

IS 1460 (2025)

Automotive Diesel Fuel - Specification (seventh revision)

High Speed Diesel

15890 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1.4 , 3.2, Table-1 (i)(Appearance)	-	200	-
Cl-3.1.4 , 3.2, Table-1 (vi)(Cetane index, Min)	-	3780	-
Cl-3.1.4 , 3.2, Table-1 (vii) (a)(Pour point3, °C, Max: Winter)	-	1900	-
Cl-3.1.4 , 3.2, Table-1 (vii) (b)(Pour point3, °C, Max: Summer)	-	1900	-
Cl-3.1.4 , 3.2, Table-1 (xi)(Kinematic viscosity, mm2/s, at 40 °C)	-	2270	-
Cl-3.1.4 , 3.2, Table-1 (viii)(Copper strip corrosion for 3 h at 50 °C, Max)	-	1130	-
Cl-3.1.4 , 3.2, Table-1 (ix)(Distillation, 95 percent v/v recovery, °C, Max)	-	2650	-
Cl-3.1.4 , 3.2, Table-1 (x)(Flash point, Abel4, °C, Min)	-	1900	-
Cl-3.1.4 , 3.2, Table-1 (xiv)(Total sulphur, mg/kg, Max)	-	4710	-
Cl-3.1.4 , 3.2, Table-1 (xiii)(Density at 15 °C, kg/m3)	-	1130	-
Cl-3.1(General- Requirements)	-	0	This Clause has been included in Facilities not Available but still it is showing under Testing Charges

06 Nov, 2028

-
Exclusion: Cl-3.1 (General- Requirements) Cl-3.1.4 , 3.2, Table-1 (ii) C (Total Acid Number (TAN), mg of KOH/g, Max) Cl-3.1.4 , 3.2, Table-1 (iii) (Ash, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (iv) (Carbon residue, on 10 percent residue1, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (v) (Cetane number, Min) Cl-3.1.4 , 3.2, Table-1 (xii) (Total contamination, mg/kg, Max) Cl-3.1.4 , 3.2, Table-1 (xix) (Polycyclic Aromatic Hydrocarbon (PAH), percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (xv) (Water content, mg/kg, Max) Cl-3.1.4 , 3.2, Table-1 (xvi) (a) (Cold Filter Plugging Point (CFPP)3, °C, Max: Winter) Cl-3.1.4 , 3.2, Table-1 (xvi) (b) (Cold Filter Plugging Point (CFPP)3, °C, Max: Summer) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability6, g/m3, Max) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability6, minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), hours, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xx) (Lubricity, wear scar diameter (wsd) at 60 ºC, μm, Max) Cl-3.1.4 , 3.2, Table-1 (xxi) (FAME content7, percent v/v, Max) Cl-3.2 (Composition) Cl-5.2 (Marking)

IS 2796 (2017)

Motor gasoline - Specification (Sixth Revision)

Motor Gasoline

12780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (viii)(Total sulphur, mg/kg, Max)	-	4710	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iii)(Density at 15°C, kg/m³)	-	1130	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiii)(Copper strip corrosion, for 3 h at 50°C, Max)	-	1130	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (i)(Appearance)	-	200	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), a)("Colour: MG 91")	-	200	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), b)("Colour: MG 95")	-	200	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: Motor gasoline)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: E10)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (b)(percent evaporated at 100°C (E 100 °C), percent v/v)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (c)(percent evaporated at 150°C (E 150 °C), percent v/v, Min)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (d)(Final boiling point, °C, Max)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (e)(Residue, percent by volume, Max)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vii)(Gum content (Solvent washed), g/m3, Max)	-	2070	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a) Motor gasoline)	-	690	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a):- E10)	-	690	-

06 Nov, 2028

-
Exclusion: Cl-4.1 (General- Requirements) Cl-4.1.2 (Antioxidants) Cl-4.1.3 (Metal Deactivators) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ix) (Lead content (as Pb ), g/l, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Oxygen content, percent by mass, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (a) (Research octane number (RON), Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (b) (Research octane number (RON), Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (a) (Motor octane number (MON),Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (b) (Motor octane number (MON),Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (a) (Reid vapour pressure (RVP) at 38°C, kPa , Max: MG(without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (b) (Reid vapour pressure (RVP) at 38°C, kPa , Max: Ethanol blended MG) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (a) (Vapour lock index (VLI),Max :- MG (without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (b) (Vapour lock index (VLI),Max :- MG (with 5 percent v/v ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (c) (Vapour lock index (VLI),Max :- E10) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xii) (Benzene content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (a) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Winter, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (b) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Other months, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xv) (Engine intake system cleanliness) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (a) (Olefin content, percent by volume, Max: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (b) (Olefin content, percent by volume, Max :MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvii) (Oxidation stability, minutes, Min) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xviii) (Aromatics content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max:- Ethers containing 5 or more ‘C’ atoms per molecules such as MTBE, ETBE or TAME) Cl-4.1.5 (Motor gasoline multifunctional additives (MFA),) Cl-4.2.1 (Organic Oxygenates- Permitted Components) Cl-4.3 (Other Requirements) Cl-5.2 (Markeing)

Bureau of Indian Standards

The National Standards Body of India

Indian Oil Corporation Ltd (IOCL) Panipat Marketing Complex Laboratory

Indian Oil Corporation Ltd. Panipat Marketing Complex, Baholi, Panipat, Panipat, Haryana, 132140

9289901556 psanjayk@indianoil.in

Scope List