BIS - LIMS (Laboratory Information Management System)

Korba Laboratory

Indian Oil Corporation Limited, Korba Terminal, Gopalpur, Katghora, Korba, Chhattisgarh 495450, Korba, Korba, Chhattisgarh, 495450

9431821905 gayenc@indianoil.in

Scope List

Reset

8 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 17021 (2018)

E 20 fuel - Admixture of anhydrous ethanol and gasoline - As fuel for spark ignited engine powered vehicles - Specification

12763 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2-Table 1-i)(Appearance)	-	200	-
4.2-Table 1-ii)(Colour)	-	200	-
4.2-Table 1-iii)(Density at 15°C, kg/m3)	-	1113	-
4.2-Table 1-iv)(Distillation a) percent evaporated at 70 °C (E70 °C), percent v/v b) percent evaporated at 100 °C (E100 °C), percent v/v c) percent evaporated at 150 °C (E150 °C ), percent v/v, Min d) Final Boiling Point, °C, Max e) Residue, percent by volume, Max)	-	2650	-
4.2-Table 1-vii)(Gum content (Solvent washed), g/m3 , Max)	-	2070	-
4.2-Table 1-viii)(Total Sulphur, mg/kg, Max)	-	4710	-
4.2-Table 1-xiii)(Copper strip corrosion (3 h at 50 °C), Max)	-	1130	-
4.2-Table 1-xx)(Ethanol content6), percent, v/v)	-	690	-

26 Nov, 2028

-
Exclusion: 4.1 (Description) 4.2-Table 1-v) (Research Octane Number (RON), Min) 4.2-Table 1-vi) (Motor Octane Number (MON), Min) 4.2-Table 1-ix) (Lead Content (as Pb), g/l, Max) 4.2-Table 1-x) (Reid Vapour pressure at 38°C, kPa, Max) 4.2-Table 1-xi) (Vapour Lock Index (VLI), Max a) Summer) b) Other Months) 4.2-Table 1-xii) (Benzene content, percent by volume, Max) 4.2-Table 1-xiv) (Water tolerance of gasoline-alcohol blends, temperature for phase separation, °C, Max a) other months b) Winter)) 4.2-Table 1-xv) (Engine intake system cleanliness) 4.2-Table 1-xvi) (Olefin content, percent by volume, Max) 4.2-Table 1-xvii) (Oxidation stability, minutes, Min) 4.2-Table 1-xviii) (Aromatic content), percent by volume, Max) 4.2-Table 1-xix) (Oxygen content, percent by mass, Max) 4.2-Table 1-xxi) (Oxygenates percent by volume, Max a) Ethers containing 5 or more “C” atoms per molecules such as MTBE, ETBE or TAME b) Any other oxygenates) 4.2-Table 1-xxii) (Motor Gasoline Content, percent, v/v) 4.4 (Organic Oxygenates) 4.5 (Phosphorous) 6.1 (Packing) 6.2 (Marking) 4.3 (Ethanol Content) 4.2-Table 1-xxiii (Amendment No.3) (Water content)

IS 15607 (2022)

Biodiesel B-100 - Fatty Acid Methyl Esters FAME Specification Second Revision

13023 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4(CFPP - ASTM D6371 / EN 16329 / IS 1448 P:110 b) Winter)	-	0	-
4.4(CFPP - ASTM D6371 / EN 16329 / IS 1448 P:110 a) Summer)	-	0	-
4.4(Copper corrosion - IS 1448 P:15 / ISO 2160)	-	0	-
4.4(Sulphur - ISO 20846 / ASTM D5453)	-	0	-
4.4(Flash point (PMCC) - IS 1448 P:21 )	-	0	-
4.4(Kinematic viscosity at 40°C - IS 1448 P:25/ ISO3104)	-	0	-
4.4(Density at 15 oC - IS 1448 P:16/ ISO 3675/ ISO 12185/ ASTM D4052)	-	0	-
4.4-Table 1-i)(Appearance, visual)	-	200	-
4.4-Table 1-ii)(Colour, visual)	-	200	-
4.4-Table 1-iii)(Density at 15 °C, kg/m3)	-	1113	-
4.4-Table 1-iv)(Kinematic viscosity at 40 °C, cSt)	-	2270	-
4.4-Table 1-v)(Flash point (PMCC)1) °C, Min)	-	1900	-
4.4-Table 1-vi)(Total Sulphur, mg/kg, Max)	-	4710	-
4.4-Table 1-xi)(Copper strip corrosion, 3 h at 50 °C, Max)	-	1130	-
4.4-Table 1-xxvi)(Cold filter plugging point (CFPP), °C Max a) summer 18 – Part 110 b) winter3))	-	1900	-

26 Nov, 2028

-
Exclusion: 4.1 (General) 4.2 (Additives) 4.3 (The materials shall be free from grit) 4.4-Table 1-vii) (Carbon residue (MCR) 2) percent by mass, Max) 4.4-Table 1-viii) (Sulfated ash, percent by mass, Max) 4.4-Table 1-ix) (Water content mg/kg, Max) 4.4-Table 1-x) (Total contamination, mg/kg, Max) 4.4-Table 1-xii) (Cetane No., Min) 4.4-Table 1-xiii) (Acid value, mg KOH/g, Max) 4.4-Table 1-xiv) (Methanol, percent by mass, Max)4.4-Table 1-xv) (Ester content, percent by mass, Min) 4.4-Table 1-xvi) (Monoglycerides content, percent by mass, Max) 4.4-Table 1-xvii) (Diglyceride content, percent by mass, Max) 4.4-Table 1-xviii) (Triglyceride content, percent by mass, Max) 4.4-Table 1-xix) (Free Glycerol percent by mass, Max) 4.4-Table 1-xx) (Total Glycerol percent by mass, Max) 4.4-Table 1-xxi) (Phosphorous mg/kg, Max) 4.4-Table 1-xxii) (Sodium + Potassium mg/kg, Max) 4.4-Table 1-xxiii) (Calcium + Magnesium mg/kg, Max) 4.4-Table 1-xxiv) (Iodine value, gm iodine/100 gm, Max) 4.4-Table 1-xxv) (Oxidation stability, at 110 °C, Min hrs. Accelerated) 4.4-Table 1-xxvii) (Linolenic acid methyl ester, percent m/m, Max) 4.4-Table 1-xxviii) (Polyunsaturated (>_ 4 double bonds) methyl ester percent m/m, Max) 5.1 (Packing) 5.2 (Marking)

IS 15464 (2022)

ANHYDROUS ETHANOL FOR USE AS BLENDING COMPONENT IN MOTOR GASOLINE SPECIFICATION First Revision

12513 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4-Table 1-i)(Appearance)	-	200	-
4.4-Table 1-ii)(Relative density at 15.6/15.6 °C, Max)	-	1113	-
4.4-Table 1-iii)(Ethanol, percent, v/v, Min1)). (excluding denaturant))	-	1340	-
4.4-Table 1-iv)(Ethanol, percent, v/v, Min1). (excluding denaturant))	-	0	-
4.4-Table 1-vii)(Residue on evaporation, percent by mass, Max.)	-	2070	-
4.4-Table 1-viii)(Acidity (as CH3 COOH), mg/kg, Max.)	-	400	-
4.4-Table 1-ix)(Alkalinity, mg/kg, Max.)	-	400	-
4.4-Table 1-x)(Aldehyde (as CH3 CHO) content, mg/l, Max)	-	1900	-
4.4-Table 1-xv)(Sulfur content, mg/kg, Max.)	-	4710	-
4.4-Table 1-xix)(Miscibility with water)	-	380	-

26 Nov, 2028

-
Exclusion: 4.1 (Description) 4.2 (Denaturant) 4.3 (Acidity) 4.4-Table 1-v) (Higher saturated alcohols (C3-C5), percent, v/v, Max) 4.4-Table 1-vi) (Boiling point, °C, Min.) 4.4-Table 1-xi) (Electrical conductivity, µS/m, Max) 4.4-Table 1-xii) (Copper, mg/kg, Max.) 4.4-Table 1-xiii) (pHe) 4.4-Table 1-xiv) (Inorganic chloride, mg/kg, Max.) 4.4-Table 1-xvi) (Sulphate content, mg/kg Max.) 4.4-Table 1-xvii) (Water content, percent v/v, Max.) 4.4-Table 1-xviii) (Hydrocarbons, percent v/v) 5.1 (Packing) 5.2 (Marking) 4.4-Table 1-iv) (Ethanol, percent, v/v, Min1). (excluding denaturant)) 4.4-Table 1 iv (Methanol)

IS 1459 (2018)

Kerosene - Specification (Fourth Revision)

10973 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2-Table 1-i)(Appearance)	-	200	-
4.2-Table 1-iv)(Colour a)Saybolt (in cas of undyedKerosene)3), Min b)Visual (in case of dyed Kerosene))	-	200	-
4.2-Table 1-v)(Copper strip corrosion for 3 h at 50°C)	-	1130	-
4.2-Table 1-vi)(Density at 15°C, kg/m3)	-	1113	-
4.2-Table 1-vii)(Distillation a)Percent recovered below200°C, percent (v/v), Min b)Final boiling point, °C, Max )	-	2650	-
4.2-Table 1-viii)(Flash point ( Abel), °C, Min)	-	1900	-
4.2-Table 1-ix)(Smoke Point4), mm, Min)	-	1130	-
4.2-Table 1-x)(Total Sulphur Content, percent, m/m, Max)	-	2650	-

26 Nov, 2028

-
Scope restricted to dyed kerosene. Exclusion: 4.2-Table 1-ii) (Acidity, inorganic) 4.2-Table 1-iii) (Burning quality2) a)Char Value, mg/kg of oil consumed, Max b)Bloom on glass Chimney) 5.1 (Packing) 5.2 (Marking).

IS 15770 (2021)

Heating Oil(LDO) - Specification

10963 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2-Table 1-iv)(Pour Point, °C, Max a) Winter [November toFebruary (both months inclusive)], b) Summer (rest of the months in a year))	-	1900	-
3.2-Table 1-vi)(Flash point, Pensky Martens ,°C, Min)	-	1900	-
3.2-Table 1-vii)(Kinematic viscosity at 40 °C, mm2 /sec)	-	2270	-
3.2-Table 1-ix)(Density at 15 °C, Kg/m3)	-	1113	-
3.2-Table 1-x)(Water content, percent by volume, Max)	-	1130	-
3.2-Table 1-xi)(Total sulphur, percent by mass)	-	2650	-

26 Nov, 2028

-
Exclusion: 3.1 (General) 3.2-Table 1-i) (Acid number, mg KOH/gm, Max) 3.2-Table 1-ii) (Ash, percent by mass, Max) 3.2-Table 1-iii) (Carbon residue, on whole samples, percent by mass, Max) 3.2-Table 1-v) (Copper strip corrosion for 3 h at 100 °C) 3.2-Table 1-viii) (Sediment, percent by mass, Max) 5.1 (Packing) 5.2 (Marking)

IS 1593 (2018)

Fuel oils - Specification (Third Revision)

10803 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6-Table 1-viii)(Sediment, percent by mass, Max)	-	1740	-
4.6-Table 1-v)(Density at 15°C kg/m3or Relative density at 15.6/15.6°C)	-	1113	-
4.6-Table 1-vi)(Flash point (Pensky Martens (closed), °C, Min)	-	1900	-
4.6-Table 1-vii)(Kinematic viscosity in centistokes at 50°C)	-	2270	-
4.6-Table 1-ix)(Sulphur, total, percent by mass, Max2))	-	2650	-
4.6-Table 1-x)(Water content, percent by volume, Max)	-	1130	-

26 Nov, 2028

-
Exclusion: Cl 4.1 (General) 4.3 (Asphaltene Content) 4.4 (TOTAL SEDIMENT) 4.5 (Spot Test) 4.6-Table 1-i) (Acidity, inorganic) 4.6-Table 1-ii) (Ash, percent by mass, Max) 4.6-Table 1-iii) (Carbon residue, mass percent, Max) 4.6-Table 1-iv) (Gross, calorific value) 5.1 (Packing) 5.2 (Marking) 4.2 (Pour Point)

IS 2796 (2017)

Motor gasoline - Specification (Sixth Revision)

12073 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (i)(Appearance)	-	200	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iii)(Density at 15°C, kg/m³)	-	1113	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: Motor gasoline)	-	530	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: E10)	-	0	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (b)(percent evaporated at 100°C (E 100 °C), percent v/v)	-	530	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (c)(percent evaporated at 150°C (E 150 °C), percent v/v, Min)	-	530	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (e)(Residue, percent by volume, Max)	-	530	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (d)(Final boiling point, °C, Max)	-	530	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vii)(Gum content (Solvent washed), g/m3, Max)	-	2070	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (viii)(Total sulphur, mg/kg, Max)	-	4710	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiii)(Copper strip corrosion, for 3 h at 50°C, Max)	-	1130	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), a)("Colour: MG 91")	-	200	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), b)("Colour: MG 95")	-	0	-

26 Nov, 2028

-
Exclusion:Cl-4.1 (General- Requirements) Cl-4.1.2 (Antioxidants) Cl-4.1.3 (Metal Deactivators) Cl-4.1.5 (Motor gasoline multifunctional additives (MFA),) Cl-4.2.1 (Organic Oxygenates- Permitted Components) Cl-4.3 (Other Requirements) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (a) (Research octane number (RON), Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (b) (Research octane number (RON), Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (a) (Motor octane number (MON),Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (b) (Motor octane number (MON),Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ix) (Lead content (as Pb ), g/l, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (a) (Reid vapour pressure (RVP) at 38°C, kPa , Max: MG(without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (b) (Reid vapour pressure (RVP) at 38°C, kPa , Max: Ethanol blended MG) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (a) (Vapour lock index (VLI),Max :- MG (without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (b) (Vapour lock index (VLI),Max :- MG (with 5 percent v/v ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (c) (Vapour lock index (VLI),Max :- E10) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xii) (Benzene content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (a) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Winter, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (b) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Other months, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xv) (Engine intake system cleanliness) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (a) (Olefin content, percent by volume, Max: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (b) (Olefin content, percent by volume, Max :MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvii) (Oxidation stability, minutes, Min) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xviii) (Aromatics content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Oxygen content, percent by mass, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max:- Ethers containing 5 or more ‘C’ atoms per molecules such as MTBE, ETBE or TAME) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max) Cl-5.2 (Markeing) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Ethanol content, percent by volume: a) Motor gasoline) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Ethanol content, percent by volume: a):- E10)

IS 1460 (2025)

Automotive Diesel Fuel - Specification (seventh revision)

15880 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1.4 , 3.2, Table-1 (i)(Appearance)	-	200	-
Cl-3.1.4 , 3.2, Table-1 (vi)(Cetane index, Min)	-	3770	-
Cl-3.1.4 , 3.2, Table-1 (vii) (a)(Pour point3, °C, Max: Winter)	-	1900	-
Cl-3.1.4 , 3.2, Table-1 (vii) (b)(Pour point3, °C, Max: Summer)	-	0	-
Cl-3.1.4 , 3.2, Table-1 (viii)(Copper strip corrosion for 3 h at 50 °C, Max)	-	1130	-
Cl-3.1.4 , 3.2, Table-1 (ix)(Distillation, 95 percent v/v recovery, °C, Max)	-	0	-
Cl-3.1.4 , 3.2, Table-1 (x)(Flash point, Abel4, °C, Min)	-	1900	-
Cl-3.1.4 , 3.2, Table-1 (xi)(Kinematic viscosity, mm2/s, at 40 °C)	-	2270	-
Cl-3.1.4 , 3.2, Table-1 (xiii)(Density at 15 °C, kg/m3)	-	0	-
Cl-3.1.4 , 3.2, Table-1 (xiv)(Total sulphur, mg/kg, Max)	-	4710	-

26 Nov, 2028

-
Exclusion: Cl-3.1 (General- Requirements) Cl-3.2 (Composition) Cl-3.1.4 , 3.2, Table-1 (ii) C (Total Acid Number (TAN), mg of KOH/g, Max) Cl-3.1.4 , 3.2, Table-1 (iii) (Ash, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (iv) (Carbon residue, on 10 percent residue, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (v) (Cetane number, Min) Cl-3.1.4 , 3.2, Table-1 (xii) (Total contamination, mg/kg, Max) Cl-3.1.4 , 3.2, Table-1 (xv) (Water content, mg/kg, Max) Cl-3.1.4 , 3.2, Table-1 (xvi) (a) (Cold Filter Plugging Point (CFPP), °C, Max: Winter) Cl-3.1.4 , 3.2, Table-1 (xvi) (b) (Cold Filter Plugging Point (CFPP), °C, Max: Summer) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability, g/m3, Max) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability, minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), hours, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xix) (Polycyclic Aromatic Hydrocarbon (PAH), percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (xx) (Lubricity, wear scar diameter (WSD) at 60 ºC, μm, Max) Cl-3.1.4 , 3.2, Table-1 (xxi) (FAME content, percent v/v, Max) Cl-5.2 (Marking)

Bureau of Indian Standards

The National Standards Body of India

Korba Laboratory

Indian Oil Corporation Limited, Korba Terminal, Gopalpur, Katghora, Korba, Chhattisgarh 495450, Korba, Korba, Chhattisgarh, 495450

9431821905 gayenc@indianoil.in

Scope List