BIS - LIMS (Laboratory Information Management System)

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE, KOLKATA

111 &112, B. T. ROAD, KOLKATA, 24 PARAGANAS NORTH, West Bengal, 700108

9433304462 dctc-er@dcmsme.gov.in

Scope List

Reset

82 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 1783 : Part 2 (2014)

Drums large, fixed ends - Specification: Part 2 grade B drums (Fourth Revision)

Grade B Type-1 & 2

14400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Capacity)	-	600	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1900	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1900	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1900	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1900	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1900	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1900	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1900	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1900	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1900	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1900	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1900	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1900	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1900	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1900	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1900	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1900	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1900	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1900	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1900	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1900	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1900	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1900	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1900	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1900	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1900	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1900	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1900	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1900	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1900	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1900	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1900	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1900	-
7(Construction)	-	600	-
7.1(Construction)	-	600	-
7.2(Construction)	-	600	-
7.3(Construction)	-	600	-
7.4(Construction)	-	600	-
7.5(Construction)	-	600	-
7.7(Construction)	-	600	-
8(Finish )	-	600	-
9.1(Leakage at air pressure )	-	1300	-
9.2(Drop Test)	-	2500	-
9.3(Hydraulic Pressure Test)	-	1300	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1900	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1900	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1900	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1900	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1900	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1900	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1900	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1900	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1900	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1900	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1900	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1900	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1900	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1900	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1900	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1900	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1900	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1900	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1900	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1900	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1900	-
6(Material)	-	5000	-
6(Material)	-	5000	-
6(Material)	-	5000	-

Complete

31 Dec, 2023

Renewed w.e.f. 28-02-2022.

IS 2074 (2023)

Ready Mixed Paint Air Drying Red Oxide Zinc Chrome Priming -Specification (Fourth Revision)

All

15250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(The smell of the material shall not be objectionable during application)	-	500	-
Cl-5.1 (a)(Pigment)	-	750	-
Cl-5.1 (b)(Driers)	-	500	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	375	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	375	-
Cl-5.1.1 (c)(Suitable extenders)	-	500	-
Cl-5.1.2(volatile vehicle)	-	750	-
Cl-5.2(Material)	-	500	-
Cl-5.3(Compatibility with Thinner)	-	750	-
Cl-5.4(Freedom from Objectionable Impurities)	-	750	-
Cl-5.5(Lead Restriction)	-	750	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	750	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	750	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	750	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	750	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	750	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	750	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	750	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	750	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	750	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	750	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	750	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	750	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	750	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	750	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	2000	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	1500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	499.99	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	500	-
Cl-5.7, Table-2 (i)(Consistency)	-	750	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	500	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	750	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	750	-
Cl-4(The smell of the material shall not be objectionable during application)	-	500	-
Cl-5.1 (a)(Pigment)	-	750	-
Cl-5.1 (b)(Driers)	-	500	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	375	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	375	-
Cl-5.1.1 (c)(Suitable extenders)	-	750	-
Cl-5.1.2(volatile vehicle)	-	750	-
Cl-5.2(Material)	-	500	-
Cl-5.3(Compatibility with Thinner)	-	750	-
Cl-5.4(Freedom from Objectionable Impurities)	-	750	-
Cl-5.5(Lead Restriction)	-	750	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	750	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	750	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	750	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	750	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	750	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	750	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	750	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	750	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	750	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	750	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	750	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	750	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	750	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	750	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	2000	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	1500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	500	-
Cl-5.7, Table-2 (i)(Consistency)	-	750	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	500	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	750	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	750	-

Complete

31 Dec, 2023

Included w.e.f 10.10.2024

IS 6528 (1995)

Stainless steel wire - Specification (First Revision)

X04Cr13, X12Cr13, X20Cr13, X30Cr13, X02Cr18Ni, X04Cr18N

10250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nitrogen)	-	1000	Test Charge for total Chemical Composition = Rs. 5000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Titanium)	-	1000	Test Charge for total Chemical Composition = Rs. 5000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Vanadium)	-	1000	Test Charge for total Chemical Composition = Rs. 5000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Boron)	-	1000	Test Charge for total Chemical Composition = Rs. 5000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Copper)	-	1000	Test Charge for total Chemical Composition = Rs. 5000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Molybdenum)	-	1000	Test Charge for total Chemical Composition = Rs. 5000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nickel)	-	1000	Test Charge for total Chemical Composition = Rs. 5000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Chromium)	-	1000	Test Charge for total Chemical Composition = Rs. 5000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Aluminium)	-	1000	Test Charge for total Chemical Composition = Rs. 5000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Silicon)	-	1000	Test Charge for total Chemical Composition = Rs. 5000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Manganese)	-	1000	Test Charge for total Chemical Composition = Rs. 5000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Phosphorous)	-	1000	Test Charge for total Chemical Composition = Rs. 5000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Sulphor)	-	1000	Test Charge for total Chemical Composition = Rs. 5000
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Carbon)	-	1000	Test Charge for total Chemical Composition = Rs. 5000
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	1250	Dimension
Cl 6(Workmanship)	-	625	Freedom from Defect
Cl 10(UTM)	-	3375	Tensile Strength, Yield Stress, Elongation Percent, Reduction of Area Percent
10.2(Reverse bend test-IS 1716)	-	800	Range : 0.3 - 10 mm
10.3(Torsion test- IS 1717)	-	800	Range : 0 - 5 mm
10.4(Wrapping test-IS 1755)	-	800	Range : 0 - 5 mm
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nitrogen)	-	1000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Titanium)	-	1000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Vanadium)	-	1000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Boron)	-	1000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Copper)	-	1000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Molybdenum)	-	1000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nickel)	-	1000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Chromium)	-	1000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Aluminium)	-	1000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Silicon)	-	1000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Manganese)	-	1000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Phosphorous)	-	1000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Sulphor)	-	1000	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Carbon)	-	1000	-
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	1000	-
Cl 6(Workmanship)	-	625	-
Cl 10(UTM)	-	1250	-
10.2(Reverse bend test-IS 1716)	-	1875	-
10.3(Torsion test- IS 1717)	-	1250	-
10.4(Wrapping test-IS 1755)	-	1250	-

Complete

31 Dec, 2023

Renewed w.e.f. 28-02-2022.

IS 3975 (1999)

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)

Type 1 & 2

4050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Dimensions)	-	1250	-
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	1000	-
8.2(Mechanical Properties (as per IS 1717))	-	1300	-
8.3(Mechanical Properties (as per IS 1755))	-	1300	-
8.4(Mechanical Properties (as perIS 10810(Part- 42)))	-	600	-
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	1600	-
6.2(Phosphorus %)	-	1000	-
6.2(Sulphur %)	-	1000	-
9.1(Galvanizing Requirements )	-	1000	-
9.2(Galvanizing Requirements )	-	500	-
9.3(Galvanizing Requirements )	-	500	-
11(Freedom from defects)	-	500	-
14 (a)(Marking)	-	500	-
14 (b)(Marking)	-	500	-
14 (c)(Marking)	-	500	-
14 (d)(Marking)	-	500	-
14 (e)(Marking)	-	500	-
14 (f)(Marking)	-	500	-
14 (g)(Marking)	-	500	-

Complete

31 Dec, 2023

IS 7181 (1986)

Specification for horizontally cast iron double flanged pipes for water, gas and sewage (First Revision)

NIL

9688 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Manufacture)	-	600	-
3.3(Manufacture)	-	600	-
3.4(Manufacture)	-	600	-
5.1(Tensile Test)	-	1600	-
6.1(Hydrostatic Test)	-	2500	-
7.1(Sizes and Mass)	-	600	-
7.2(Sizes and Mass)	-	600	-
7.3(Sizes and Mass)	-	600	-
7.4(Sizes and Mass Dimensions of Flange)	-	600	-
8.5(Permissible Deviation from a Straight Line)	-	600	-
9(Coating)	-	2000	-

Complete

31 Dec, 2023

Renewed w.e.f. 28-02-2022.

IS 4038 (1986)

Foot Valves For Water Works Purposes

FG 200,LTB 2

7375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(MANUFACTURE- Housings)	-	212	-
4.1(MANUFACTURE-Type)	-	211	-
4.2(MANUFACTURE)	-	212	-
4.4(MANUFACTURE- Flanges)	-	212	-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-Size)	-	212	-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-D)	-	212	-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-Rhickness of flange)	-	212	-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-C)	-	212	-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-A)	-	212	-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-d)	-	212	-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-Dia of bolt)	-	212	-
4.5(MANUFACTURE- Screwed Ends-screwed-ends Polygon side)	-	212	-
4.5-Table 3(MANUFACTURE- Screwed Ends-screwed-DIMENSIONS OF SCREWED-END FOOT VALVES-Nominal Size)	-	212	-
4.5-Table 3(MANUFACTURE- Screwed Ends-screwed-DIMENSIONS OF SCREWED-END FOOT VALVES-L)	-	212	-
4.5.1-Table 3(MANUFACTURE- Screwed Ends-screwed-DIMENSIONS OF SCREWED-END FOOT VALVES-H)	-	212	-
4.5.2-Table 4(MANUFACTURE- Screwed Ends-screwed-DIMENSIONS OF SCREWED-END FOOT VALVES-Nominal size)	-	212	-
4.5.2-Table 4(MANUFACTURE- Screwed Ends-screwed-DIMENSIONS OF SCREWED-END FOOT VALVES-D)	-	212	-
4.6(MANUFACTURE- Strainers )	-	212	-
4.6(MANUFACTURE- Strainers -Thickness)	-	2122	-
4.6-Table 5(MANUFACTURE- Strainers -DIMENSIONS OF STRAINER HOLES -Nominal Size)	-	212	-
4.6-Table 5(MANUFACTURE- Strainers -DIMENSIONS OF STRAINER HOLES -Maximum dia of Hole(Ciecular))	-	212	-
4.6-Table 5(MANUFACTURE- Strainers -DIMENSIONS OF STRAINER HOLES -MAXIMUM VALUE FOR THE Small dimension of the hole(Non-circular))	-	212	-
4.7(MANUFACTURE-Bolts and Nuts-)	-	212	-
6.1.1(Seat Test)	-	1250	-
6.1.2(Housing Test)	-	1250	-

Complete

31 Dec, 2023

Renewed w.e.f. 28-02-2022.. Hydrostatic Test up 300 mm, above 300 mm test can be carried at Unit Premises

IS 14394 (1996)

Industrial fasteners - Hexagon nuts of product grade C - Hot - Dip galvanized - Specification (Size Range M12 To M36)

M12,16,20,22,27,30,33,36 Cl 5&8

2813 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3(Dimensions)	-	2813		-

Complete

31 Dec, 2023

Renewed w.e.f. 28-02-2022.

IS 1536 (2001)

Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage - Specification (Fourth Revision)

11125 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.2, annex-A(Tensile Test ( for pipes over 300mm))	-	1600	-
11.3(Brinell Hardness Test)	-	1900	-
12.1(Hydrostatic Test)	-	1250	-
13.3 Table 3 (DE)	-	100	-
13.3 Table 3 (DI)	-	100	-
13.3 Table 3 (p)	-	100	-
13.3 Table 3 (g)	-	100	-
13.3 Table 3 (h)	-	100	-
13.3 Table 3 (a(optional))	-	100	-
13.3 Table 3 (K)	-	100	-
13.3 Table 3 (L)	-	100	-
13.3 Table 3 (M)	-	100	-
13.3 Table 3 (N)	-	100	-
13.3 Table 3 (f)	-	100	-
13.3 Table 4(DE)	-	100	-
13.3 Table 4(X)	-	100	-
13.3 Table 4(DI)	-	100	-
13.3 Table 4(P)	-	100	-
13.3 Table 4(Q)	-	100	-
13.3 Table 4(I)	-	100	-
13.3 Table 4(J)	-	100	-
13.3 Table 4(K)	-	100	-
13.3 Table 4(N)	-	100	-
13.3 Table 4(O)	-	100	-
13.3 Table 4(S)	-	100	-
13.3 Table 4(T)	-	100	-
13.3 Table 4(L)	-	100	-
13.3 Table 4(M)	-	100	-
13.4 Table 5(c)	-	100	-
13.4 Table 5(D)	-	100	-
13.4 Table 5(E)	-	100	-
13.4 Table 5(b)	-	100	-
13.4 Table 5(a)	-	100	-
13.4 Table 5(r)	-	100	-
13.4 Table 5(f)	-	100	-
13.4 Table 5(s)	-	100	-
13.4 Table 5(Holes Number)	-	100	-
13.4 Table 5(Holes Diameter)	-	100	-
13.4 Table 5(Diameter of Bolts)	-	100	-
13.5 Table 6 to 8(DE Lead joint)	-	100	-
13.5 Table 6 to 8(DE Push on joint)	-	100	-
13.5 Table 6 to 8(e)	-	100	-
11.2, annex-A(Tensile Test ( for pipes over 300mm))	-	1600	-
11.3(Brinell Hardness Test)	-	1900	-
12.1(Hydrostatic Test)	-	1250	-

Complete

31 Dec, 2023

Renewed w.e.f. 28-02-2022.

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

35600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	1500	Clause No. 6.1-Freedom From Defects Charge Rs. 500.00 Clause No. 4.2 - Density charge Rs. 1000.00 Total Rs. 1500.00
7.1 Table-1(Dimensional measurement of wires)	-	500	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	25000	3 Wire Al Conductor-5000 7 Wire Al Conductor-6250 13 Wire Al Conductor-7500 19Wire Al Conductor-10000 37Wire Al Conductor-15000 49Wire Al Conductor-18750 54Wire Al Conductor-22500 61Wire Al Conductor-25000
8.1(Joints in wires-Conductors Containing Seven Wires)	-	600	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	600	-
9.1(Stranding)	-	500	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	500	-
9.3(Direction of Lay)	-	500	-
9.4(Multiple layers of wires)	-	500	-
11(Packing and Marking)	-	600	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	1600	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	1600	-
12.3 Table 1(Elongation Test- Before Stranding)	-	1200	-
12.3 Table 1(Elongation Test- After Stranding)	-	1200	-
12.4 Table 1(Resistance of Aluminium wire)	-	25000	3 Wire Al Conductor-5000 7 Wire Al Conductor-6250 13 Wire Al Conductor-7500 19Wire Al Conductor-10000 37Wire Al Conductor-15000 49Wire Al Conductor-18750 54Wire Al Conductor-22500 61Wire Al Conductor-25000
9.2(Lay Ratio 24 wire layer)	-	500	-
9.2(Lay Ratio 18 wire layer)	-	500	-
9.2(Lay Ratio 12 wire layer)	-	500	-
9.2(Lay Ratio 3/6 wire layer)	-	500	-
7.2.1(Sizes)	-	500	-
6.1(Freedom from Defects)	-	1500	Clause No. 6.1-Freedom From Defects Charge Rs. 500.00 Clause No. 4.2 - Density charge Rs. 1000.00 Total Rs. 1500.00
7.1 Table-1(Dimensional measurement of wires)	-	500	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	25000	3 Wire Al Conductor-5000 7 Wire Al Conductor-6250 13 Wire Al Conductor-7500 19Wire Al Conductor-10000 37Wire Al Conductor-15000 49Wire Al Conductor-18750 54Wire Al Conductor-22500 61Wire Al Conductor-25000
8.1(Joints in wires-Conductors Containing Seven Wires)	-	600	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	600	-
9.1(Stranding)	-	500	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	500	-
9.3(Direction of Lay)	-	500	-
9.4(Multiple layers of wires)	-	500	-
11(Packing and Marking)	-	600	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	1600	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	1600	-
12.3 Table 1(Elongation Test- Before Stranding)	-	1200	-
12.3 Table 1(Elongation Test- After Stranding)	-	1200	-
12.4 Table 1(Resistance of Aluminium wire)	-	25000	3 Wire Al Conductor-5000 7 Wire Al Conductor-6250 13 Wire Al Conductor-7500 19Wire Al Conductor-10000 37Wire Al Conductor-15000 49Wire Al Conductor-18750 54Wire Al Conductor-22500 61Wire Al Conductor-25000
9.2(Lay Ratio 24 wire layer)	-	500	-
9.2(Lay Ratio 18 wire layer)	-	500	-
9.2(Lay Ratio 12 wire layer)	-	500	-
9.2(Lay Ratio 3/6 wire layer)	-	500	-
7.2.1(Sizes)	-	500	-

Complete

31 Dec, 2023

Included w.e.f. 01.08.2024 For actual area upto 288mm Sq. only.

IS 398 : Part 3 (1976)

Specification for aluminium conductors for overhead transmission purposes: Part 3 aluminium conductors, aluminized steel reinforced (Second Revision)

41600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.6(Aluminizing Test)	-	3000	Clause No. 12.6 of Amndt 3 - Aluminizing Test Charge Rs. 2000.00 Clause No. 3.2 & 4.1 - density charge Rs. 1000.00
7.2.2 Table 3(Resistance test-Aluminium wire Calculated Resistance)	-	25000	3 Wire Al Conductor-5000 7 Wire Al Conductor-6250 13 Wire Al Conductor-7500 19Wire Al Conductor-10000 37Wire Al Conductor-15000 49Wire Al Conductor-18750 54Wire Al Conductor-22500 61Wire Al Conductor-25000
12.5 Table 1(Resistance test-Aluminium wire after stranding)	-	25000	3 Wire Al Conductor-5000 7 Wire Al Conductor-6250 13 Wire Al Conductor-7500 19Wire Al Conductor-10000 37Wire Al Conductor-15000 49Wire Al Conductor-18750 54Wire Al Conductor-22500 61Wire Al Conductor-25000
12.5 Table 1(Resistance test-Aluminium wire before Stranding)	-	25000	3 Wire Al Conductor-5000 7 Wire Al Conductor-6250 13 Wire Al Conductor-7500 19Wire Al Conductor-10000 37Wire Al Conductor-15000 49Wire Al Conductor-18750 54Wire Al Conductor-22500 61Wire Al Conductor-25000
12.4.2(Wrapping TestAluminized Steel Wires After Stranding)	-	1200	-
12.4.2(Wrapping Test Aluminized Steel Wires Before Stranding)	-	1200	-
12.4.1(Wrapping Test Aluminium Wires After Stranding)	-	1200	-
12.4.1(Wrapping Test Aluminium Wires Before Stranding)	-	1200	-
12.3.2(Ductility by Elongation Test after stranding)	-	1200	-
12.3.2(Ductility by Elongation Test before stranding)	-	1200	-
12.3.1(Ductility by Torsion Test after stranding)	-	1200	-
12.3.1(Ductility by Torsion Test after stranding)	-	1200	-
12.3.1(Ductility by Torsion Test before stranding)	-	1200	-
12.3.1(Ductility by Torsion Test before stranding)	-	1200	-
12.2 Table 2(Breaking Load of aluminized steel wires After Stranding)	-	1600	-
12.2 Table 1(Breaking Load of Aluminium Wires After Stranding)	-	1600	-
12.2 Table 2(Breaking Load of aluminized steel wires Before Stranding)	-	1600	-
12.2 Table 1(Breaking Load of Aluminium Wires Before Stranding)	-	1600	-
9.5(STRANDING)	-	500	-
9.4(STRANDING)	-	500	-
9.3 Table 4(STRANDING)	-	500	-
9.2 Table 4(STRANDING : Lay Ratio For Steel Core)	-	500	-
9.2 Table 4(STRANDING : Lay Ratio For Aluminium Wire)	-	500	-
9.2 Table 4(STRANDING : Lay Ratio For Aluminium Wire)	-	500	-
9.2 Table 4(STRANDING : Lay Ratio For Aluminium Wire)	-	500	-
8.2(JOINTS IN WIRES : Aluminized Steel Wires)	-	600	-
8.1(JOINTS IN WIRES : Aluminium Wires)	-	600	-
7.1.2.2 Table 2(Diameter of Alumized Steel Wires After Stranding)	-	500	-
7.1.2.1 Table-1(Diameter of Aluminium Wires After Stranding)	-	500	-
7.1.2.2 Table 2(Diameter of Alumized Steel Wires Before Stranding)	-	500	-
7.1.2.1 Table-1(Diameter of Aluminium Wires Before Stranding)	-	1600	Cl. 7, 7.1.1, 10, Table 1, Table2, Table 3 - Dimension, Size & Mass Charge Rs. 1100.00 Cl. 6 - Freedom From Defects charge Rs. 500
12.6(Aluminizing Test)	-	3000	Clause No. 12.6 of Amndt 3 - Aluminizing Test Charge Rs. 2000.00 Clause No. 3.2 & 4.1 - density charge Rs. 1000.00
7.2.2 Table 3(Resistance test-Aluminium wire Calculated Resistance)	-	25000	3 Wire Al Conductor-5000 7 Wire Al Conductor-6250 13 Wire Al Conductor-7500 19Wire Al Conductor-10000 37Wire Al Conductor-15000 49Wire Al Conductor-18750 54Wire Al Conductor-22500 61Wire Al Conductor-25000
12.5 Table 1(Resistance test-Aluminium wire after stranding)	-	25000	3 Wire Al Conductor-5000 7 Wire Al Conductor-6250 13 Wire Al Conductor-7500 19Wire Al Conductor-10000 37Wire Al Conductor-15000 49Wire Al Conductor-18750 54Wire Al Conductor-22500 61Wire Al Conductor-25000
12.5 Table 1(Resistance test-Aluminium wire before Stranding)	-	25000	3 Wire Al Conductor-5000 7 Wire Al Conductor-6250 13 Wire Al Conductor-7500 19Wire Al Conductor-10000 37Wire Al Conductor-15000 49Wire Al Conductor-18750 54Wire Al Conductor-22500 61Wire Al Conductor-25000
12.4.2(Wrapping TestAluminized Steel Wires After Stranding)	-	1200	-
12.4.2(Wrapping Test Aluminized Steel Wires Before Stranding)	-	1200	-
12.4.1(Wrapping Test Aluminium Wires After Stranding)	-	1200	-
12.4.1(Wrapping Test Aluminium Wires Before Stranding)	-	1200	-
12.3.2(Ductility by Elongation Test after stranding)	-	1200	-
12.3.2(Ductility by Elongation Test before stranding)	-	1200	-
12.3.1(Ductility by Torsion Test after stranding)	-	1200	-
12.3.1(Ductility by Torsion Test after stranding)	-	1200	-
12.3.1(Ductility by Torsion Test before stranding)	-	1200	-
12.3.1(Ductility by Torsion Test before stranding)	-	1200	-
12.2 Table 2(Breaking Load of aluminized steel wires After Stranding)	-	1600	-
12.2 Table 1(Breaking Load of Aluminium Wires After Stranding)	-	1600	-
12.2 Table 2(Breaking Load of aluminized steel wires Before Stranding)	-	1600	-
12.2 Table 1(Breaking Load of Aluminium Wires Before Stranding)	-	1600	-
9.5(STRANDING)	-	500	-
9.4(STRANDING)	-	500	-
9.3 Table 4(STRANDING)	-	500	-
9.2 Table 4(STRANDING : Lay Ratio For Steel Core)	-	500	-
9.2 Table 4(STRANDING : Lay Ratio For Aluminium Wire)	-	500	-
9.2 Table 4(STRANDING : Lay Ratio For Aluminium Wire)	-	500	-
9.2 Table 4(STRANDING : Lay Ratio For Aluminium Wire)	-	500	-
8.2(JOINTS IN WIRES : Aluminized Steel Wires)	-	600	-
8.1(JOINTS IN WIRES : Aluminium Wires)	-	600	-
7.1.2.2 Table 2(Diameter of Alumized Steel Wires After Stranding)	-	500	-
7.1.2.1 Table-1(Diameter of Aluminium Wires After Stranding)	-	500	-
7.1.2.2 Table 2(Diameter of Alumized Steel Wires Before Stranding)	-	500	-
7.1.2.1 Table-1(Diameter of Aluminium Wires Before Stranding)	-	1600	Cl. 7, 7.1.1, 10, Table 1, Table2, Table 3 - Dimension, Size & Mass Charge Rs. 1100.00 Cl. 6 - Freedom From Defects charge Rs. 500

Complete

31 Dec, 2023

Included w.e.f. 01.08.2024 For nominal area upto 400mm Sq. only.

IS 2932 (2013)

Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification (Fourth Revision)

All

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3(Freedom from Coarse Particles)	-	750	-
6.4(Skin Formation)	-	750	-
6.5(Thinning Properties)	-	750	-
6.6(Application Properties)	-	750	-
6.8(Lead Restriction)	-	750	-
6.9 Table 2 (1) a. Consistency ( Undercoating and Finishing ) )	-	750	-
6.9 Table 2 (1) b. Viscosity by ford 80-120 s )	-	750	-
6.9 Table 2 ( 2) Mass, ( Under coating ) )	-	750	-
6.9 Table 2 ( 2) Mass, (Finishing ) )	-	750	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Under coating ) )	-	750	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Finishing ) )	-	750	-
6.9 Table 2 (b) Hard dry ( Under coating ) )	-	750	-
6.9 Table 2 (b) Hard dry, (Finishing ) )	-	750	-
6.9 Table 2 (c) Tack free ( Under coating (Finishing ) )	-	750	-
6.9 Table 2 (4) a) Finish (Under coating ) )	-	750	-
6.9 Table 2 (4) a) Finish (Finishing) )	-	750	-
6.9 Table 2 (b) ) Gloss 60º (Under coating ) )	-	750	-
6.9 Table 2 (b) ) Gloss 60º (Finishing) )	-	750	-
6.9 Table 2 (5) Fineness of grind,(Under coating ))	-	750	-
6.9 Table 2 (5) Fineness of grind,(Finishing))	-	750	-
6.9 Table 2 (6) Colour , (Finishing))	-	750	-
6.9 Table 2 (7) Flexibility and adhesion: a) Scratch hardness No such scratch as to show the bare metal after Clause 3 of — (Load 1 000 g) ( Under coating & Finishing ) )	-	750	-
6.9 Table 2 (b) Bend test (with 6.25 mm 48 h of air in type 1 apparatus) ( Under coating & Finishing ) )	-	750	-
6.9 Table 2 (8) Flash point ( Under coating & Finishing ) )	-	750	-
6.9 Table 2 (9) Composition: a) Volume solids ( Under coating ))	-	750	-
6.9 Table 2 (9) Composition: a) Volume solids ( Finishing))	-	750	-
6.9 Table 2 (9) Composition:b) Phthalic anhydride content of non-volatile vehicle ( Under coating & Finishing ))	-	750	-
6.9 Table 2 (10) Resistance to acid ( Under coating & Finishing ))	-	750	-
6.9 Table 2 (11) Resistance to alkali ( Under coating & Finishing ))	-	750	-
6.9 Table 2 (12) Accelerated storage stability test ( Under coating & Finishing ))	-	1500	-
6.9 Table 2 (13) Keeping properties ( Under coating & Finishing ))	-	2500	-
6.9 Table 2 (14) Wet opacity ( Under coating & Finishing ))	-	750	-
6.3(Freedom from Coarse Particles)	-	750	-
6.4(Skin Formation)	-	750	-
6.5(Thinning Properties)	-	750	-
6.6(Application Properties)	-	750	-
6.8(Lead Restriction)	-	750	-
6.9 Table 2 (1) a. Consistency ( Undercoating and Finishing ) )	-	750	-
6.9 Table 2 (1) b. Viscosity by ford 80-120 s )	-	750	-
6.9 Table 2 ( 2) Mass, ( Under coating ) )	-	750	-
6.9 Table 2 ( 2) Mass, (Finishing ) )	-	750	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Under coating ) )	-	750	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Finishing ) )	-	750	-
6.9 Table 2 (b) Hard dry ( Under coating ) )	-	750	-
6.9 Table 2 (b) Hard dry, (Finishing ) )	-	750	-
6.9 Table 2 (c) Tack free ( Under coating (Finishing ) )	-	750	-
6.9 Table 2 (4) a) Finish (Under coating ) )	-	750	-
6.9 Table 2 (4) a) Finish (Finishing) )	-	750	-
6.9 Table 2 (b) ) Gloss 60º (Under coating ) )	-	750	-
6.9 Table 2 (b) ) Gloss 60º (Finishing) )	-	750	-
6.9 Table 2 (5) Fineness of grind,(Under coating ))	-	750	-
6.9 Table 2 (5) Fineness of grind,(Finishing))	-	750	-
6.9 Table 2 (6) Colour , (Finishing))	-	750	-
6.9 Table 2 (7) Flexibility and adhesion: a) Scratch hardness No such scratch as to show the bare metal after Clause 3 of — (Load 1 000 g) ( Under coating & Finishing ) )	-	750	-
6.9 Table 2 (b) Bend test (with 6.25 mm 48 h of air in type 1 apparatus) ( Under coating & Finishing ) )	-	750	-
6.9 Table 2 (8) Flash point ( Under coating & Finishing ) )	-	750	-
6.9 Table 2 (9) Composition: a) Volume solids ( Under coating ))	-	750	-
6.9 Table 2 (9) Composition: a) Volume solids ( Finishing))	-	750	-
6.9 Table 2 (9) Composition:b) Phthalic anhydride content of non-volatile vehicle ( Under coating & Finishing ))	-	750	-
6.9 Table 2 (10) Resistance to acid ( Under coating & Finishing ))	-	750	-
6.9 Table 2 (11) Resistance to alkali ( Under coating & Finishing ))	-	750	-
6.9 Table 2 (12) Accelerated storage stability test ( Under coating & Finishing ))	-	1500	-
6.9 Table 2 (13) Keeping properties ( Under coating & Finishing ))	-	2500	-
6.9 Table 2 (14) Wet opacity ( Under coating & Finishing ))	-	750	-
6.7.1.3(QUV apparatus)	-	3750	-
6.2(Condition in container)	-	750	-
7.2(Marking)	-	750	-
7.3(BIS Certification Marking)	-	750	-
6.7.1.3(QUV apparatus)	-	750	-
6.2(Condition in container)	-	750	-
7.2(Marking)	-	750	-
7.3(BIS Certification Marking)	-	750	-
6.7.1.3(QUV apparatus)	-	3750	-
6.2(Condition in container)	-	750	-
7.2(Marking)	-	750	-
7.3(BIS Certification Marking)	-	750	-

Complete

31 Dec, 2023

Included w.e.f. 25.07.2024

IS 2933 : Part 1 (2013)

Enamel, exterior: (A) undercoating (B) finishing - Specification: Part 1 for domestic and decorative applications (Second Revision)

All

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1.(i)Composite 6.1(Total non-volatile)	-	750	-
6.1(Pigment)	-	0	-
6.1.5(Phthalic anhydride)	-	750	-
6.2(Durability)	-	3750	-
6.4(Lead Restriction)	-	750	-
Table 2.1.(i)(a)Consistency)	-	750	-
Table 2.1.(ii)(b)Viscosity by ford cup No-4)	-	750	-
Table 2..(ii)(Mass in Kg/10L,Min.)	-	750	-
Table 2 (iii) Drying time max.(a) Surface dry)	-	750	-
Table 2 (iii) Drying time max.(b) Hard dry)	-	750	-
Table 2 (iii) Drying time max.(c) Tack free)	-	750	-
Table 2 (iv)(Wet opacity Min,m²/10L)	-	750	-
Table 2 (v)(Finish)	-	750	-
Table 2 (vi)(Fineness of grind,microns,Max.)	-	750	-
Table 2 (vii)(Colour)	-	750	-
Table 2 (vii)(Colour)	-	750	-
Table 2 (viii)(Water content)	-	750	-
Table 2 (ix) Flexibility and adhesion(a) Scratch hardness)	-	750	-
Table 2 (ix) Flexibility and adhesion(b) Bend Test,(with 6.25mm)	-	750	-
Table 2 (x)(Stripping Test)	-	750	-
Table 2 (xi)(Flash point)	-	750	-
Table 2 (xii)(Keeping properties)	-	2500	-
Table 1.(i)Composite 6.1(Total non-volatile)	-	750	-
6.1(Pigment)	-	750	-
6.1.5(Phthalic anhydride)	-	749.99	-
6.2(Durability)	-	3750	-
6.4(Lead Restriction)	-	750	-
Table 2.1.(i)(a)Consistency)	-	750	-
Table 2.1.(ii)(b)Viscosity by ford cup No-4)	-	750	-
Table 2..(ii)(Mass in Kg/10L,Min.)	-	750	-
Table 2 (iii) Drying time max.(a) Surface dry)	-	750	-
Table 2 (iii) Drying time max.(b) Hard dry)	-	750	-
Table 2 (iii) Drying time max.(c) Tack free)	-	750	-
Table 2 (iv)(Wet opacity Min,m²/10L)	-	750	-
Table 2 (v)(Finish)	-	750	-
Table 2 (vi)(Fineness of grind,microns,Max.)	-	750	-
Table 2 (vii)(Colour)	-	750	-
Table 2 (vii)(Colour)	-	750	-
Table 2 (viii)(Water content)	-	750	-
Table 2 (ix) Flexibility and adhesion(a) Scratch hardness)	-	750	-
Table 2 (ix) Flexibility and adhesion(b) Bend Test,(with 6.25mm)	-	750	-
Table 2 (x)(Stripping Test)	-	750	-
Table 2 (xi)(Flash point)	-	750	-
Table 2 (xii)(Keeping properties)	-	2500	-

Complete

31 Dec, 2023

Included w.e.f. 27.08.2024

IS 1030 (1998)

Carbon steel castings for general engineering purposes - Specification (Fifth Revision)

All

16175 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CI.8.1, 8.3 and 8.4.1, Table-1(Carbon)	-	500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Sulpur)	-	500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Phosphorus)	-	500	-
CI.8.1, 8.3 and 8.4.1, Table-1()	-	500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Silicon)	-	500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Chromium)	-	500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Nickel)	-	500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Molybdenum)	-	500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Copper)	-	500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Vanadium)	-	500	-
CI.13.2, Table-2(Tensile Test)	-	1200	-
CI.13.2, Table-2(Yield Stress)	-	675	-
CI.13.2, Table-2(Elongation)	-	1200	-
CI.13.4, Table-2(Bend Test)	-	1200	-
CI.13.3(Impact Test)	-	1900	-
CI.13.3(Hydraulic Test)	-	2500	-
9(Workmanship & Finish)	-	600	-
10(Freedom from defects)	-	600	-
11(Fetting and dressing)	-	600	-
14(Non-destructive tests)	-	1300	-
16(Hydraulic test)	-	2500	-
18(Marking)	-	600	-
1()	-	0	-
CI.8.1, 8.3 and 8.4.1, Table-1(Carbon)	-	500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Sulpur)	-	500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Phosphorus)	-	500	-
CI.8.1, 8.3 and 8.4.1, Table-1()	-	500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Silicon)	-	500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Chromium)	-	500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Nickel)	-	500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Molybdenum)	-	500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Copper)	-	500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Vanadium)	-	500	-
CI.13.2, Table-2(Tensile Test)	-	1200	-
CI.13.2, Table-2(Yield Stress)	-	675	-
CI.13.2, Table-2(Elongation)	-	1200	-
CI.13.4, Table-2(Bend Test)	-	1200	-
CI.13.3(Impact Test)	-	1900	-
CI.13.3(Hydraulic Test)	-	2500	-
9(Workmanship & Finish)	-	600	-
10(Freedom from defects)	-	600	-
11(Fetting and dressing)	-	600	-
14(Non-destructive tests)	-	1300	-
16(Hydraulic test)	-	2500	-
18(Marking)	-	600	-

Complete

31 Dec, 2023

Included w.e.f. 01.08.2024 Excluding: Cl.14 (Ultrasonic inspection, magnetic particle inspection and radiographic inspection)

IS 14543 (2016)

Packaged drinking water (Other Than Packaged Natural Mineral Water) - Specification (Second Revision)

All

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3 Table-4 ii (Beta emitters)	-	2500	-
5.3 Table-4 i (Alpha emitters)	-	2500	-
5.4 ii)(Total pesticied residue)	-	0	-
5.4 i)(Dieldrin)	-	0	-
5.4 i)(Aldrin)	-	0	-
5.4 i)(Malaoxon)	-	0	-
5.4 i)(Malathion)	-	0	-
5.4 i)(Methyl Paraoxon)	-	0	-
5.4 i)(Methyl Parathion)	-	0	-
5.4 i)(Atrazine)	-	0	-
5.4 i)(Alachlor)	-	0	-
5.4 i)(Isoproturon)	-	0	-
5.4 i)(Butachlor)	-	0	-
5.4 i)(2,4-D)	-	0	-
5.4 i)(phorate sulphone)	-	0	-
5.4 i)(Phorate sulphoxide)	-	0	-
5.4 i)(Phorate)	-	0	-
5.4 i)(Chlorpyrifos)	-	0	-
5.4 i)(Ethion)	-	0	-
5.4 i)(Monocrotophos)	-	0	-
5.4 i)(Endosulfan Sulphate)	-	0	-
5.4 i)(beta-Endosulfan)	-	0	-
5.4 i)(alpha-Endosulfan)	-	0	-
5.4 i)(Delta-HCH)	-	0	-
5.4 i)(beta-HCH)	-	0	-
5.4 i)(alpha-HCH)	-	0	-
5.4 i)(Gamma-HCH (Lindane))	-	0	-
5.4 i)(p,p DDD)	-	0	-
5.4 i)(o,p DDD)	-	0	-
5.4 i)(p,p DDE)	-	0	-
5.4 i)(o,p DDE)	-	0	-
5.4 i)(p,p DDT)	-	0	-
5.4 i)(o,p DDT)	-	0	-
5.3 Table-3 ix (Polynuclear aromatic hydrocarbons)	-	0	-
5.3 Table-3 viii (Polychlorinated biphenyle (PCB))	-	0	-
5.3 Table-3 vii(Nickel (as Ni))	-	0	-
5.3 Table-3 vi(Chromium (as Cr))	-	0	-
5.3 Table-3 v(Lead (as Pb))	-	0	-
5.3 Table-3 iv (Cyanide (as CN))	-	0	-
5.3 Table-3 iii(Arsenic (as As))	-	0	-
5.3 Table-3 ii(Cadmium (as Cd))	-	0	-
5.3 Table-3 i(Mercury (as Hg))	-	0	-
5.3 Table-2 xxv(Bromates (as BrO3),)	-	0	-
5.3 Table-2 xxiv(Borates (as B))	-	0	-
5.3 Table-2 xxiii(Antimony (as Sb))	-	0	-
5.3 Table-2 xxii(Sulphide (as H2S))	-	0	-
5.3 Table-2 xxi (Anionic surface active agents (as MBAS))	-	0	-
5.3 Table-2 xx(Mineral oil)	-	0	-
5.3 Table-2 xix (Phenolic compounds (as C6H5OH))	-	0	-
5.3 Table-2 xviii(Residual free chlorine)	-	0	-
5.3 Table-2 xvii(Sodium (as Na))	-	0	-
5.3 Table-2 xvi(Magnesium (as Mg))	-	0	-
5.3 Table-2 xv(Calcium (as Ca),)	-	0	-
5.3 Table-2 xiv(Alkaliniity (as HCO3))	-	0	-
5.3 Table-2 xiii(Sulphate (as SO4),)	-	0	-
5.3 Table-2 xii(Selenium (as Se),)	-	0	-
5.3 Table-2 xi(Chloride (as Cl))	-	0	-
5.3 Table-2 x(Aluminium (as Al))	-	0	-
5.3 Table-2 ix(Silver (as Ag))	-	0	-
5.3 Table-2 viii(Zinc (as Zn))	-	0	-
5.3 Table-2vii(Fluoride (as F))	-	0	-
5.3 Table-2 vi(Nitrite (as NO2))	-	0	-
5.3 Table-2 v(Nitrate (as NO3))	-	0	-
5.3 Table-2 iv(Manganese (as Mn))	-	0	-
5.3 Table-2 iii(Iron (as Fe),)	-	0	-
5.3 Table-2 ii(Copper (as Cu))	-	0	-
5.3 Table-2 i(Barium (as Ba))	-	0	-
5.3 Table-1vi(pH)	-	0	-
5.3 Table-1 v(Total dissolved solids)	-	0	-
5.3 Table-1 iv(Turbidity)	-	0	-
5.3 Table-1 iii(Taste)	-	0	-
5.3 Table-1 ii(Odour)	-	0	-
5.3 Table-1 i(Colour)	-	0	-
5.3(Description)	-	0	-
5.2.9(Vibrio parahaemolyticus)	-	0	-
5.2.9(Vibrio cholera)	-	0	-
5.2.8(Shigella)	-	0	-
5.2.8(Salmonella)	-	0	-
5.2.7(Yeast and Mould)	-	0	-
5.2.6(Aerobic Microbial Count at 37°C)	-	0	-
5.2.6(Aerobic Microbial Count at 20-22°C)	-	0	-
5.2.5(Pseudomonas Aeruginosa)	-	0	-
5.2.4(Sulphite Reducing Anaerobes)	-	0	-
5.2.3(Staphylococcus Aureus)	-	0	-
5.2.3(Faecal Streptococci)	-	0	-
5.2.2(Coliform)	-	0	-
5.2.1(Escherichia coli (or thermotolerant bacteria))	-	0	-
6(Overall Migration)	-	0	-
6(Colour Migration)	-	0	-
10.0(Water potability test-taste)	-	0	-
10.0(Water potability test - odour)	-	0	-
4.6.5(Colour Migration (cap))	-	0	-
4.6.6(Overall Migration-caps)	-	0	-
4.6.5(Overall Migration-bottles)	-	0	-
4.6.4(Drop test)	-	0	-
4.6.3( Air pressure leakage test)	-	0	-
4.6.3( Vibration leakage test )	-	0	-
4.6.3( Clousure leakage test)	-	0	-
4.6.2(Transparency)	-	0	-
4.5(Thickness- Bottom)	-	0	-
4.5(Thickness- Middle)	-	0	-
4.5(Thickness- Top)	-	0	-
4.4(Brirnful Capacity )	-	0	-
4.3(Workn-ranship, Finish & Appearance)	-	0	-
4.2.1(Peelability)	-	0	-
4.2(Design, Shape & Dimension)	-	0	-
5.4(i)(δ – HCH / USEPA 525.2-1995 (Rev 2) USEPA 508-1989 (Rev 3))	-	0	-
5.4(ii)(Total Pesticide Residues / USEPA 525.2-1995 (Rev 2) USEPA 8141A – 1994 (Rev I) USEPA 507-1989 (Rev 2) USEPA 1657A – 2000 USEPA 508-1989 (Rev 3) USEPA 515.1 – 1995 USEPA 532 – 2000 (Rev 1)	-	0	-
Table 3, x)(Uranium)	-	0	-
Table 3, x) (radioactive)(Uranium)	-	0	-
5.3 Table-3 x(Uranium)	-	0	-

Complete

31 Dec, 2023

Included w.e.f. 15.07.2024 For Alpha Emitters and Beta Emitters only.

IS 10500 (2012)

Drinking water - Specification (Second Revision)

(a) Alpha Count, Bq/L (b) Beta Count, Bq/L

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4. SL No.i)of Table I(Colour)	-	0	-
4.SL No.ii) of Table I(Odour)	-	0	-
4.SL No.iii)of Table I(pH)	-	0	-
4.SL No.v)of Table I(Turbidity, NTU, Max)	-	0	-
4.SL No.vi)of Table I(Total dissolved solids, mg/l, max)	-	0	-
table 2 sl.no 1( Aluminium (as Al), mg/l, Max)	-	0	-
table 2 sl.no 2(Ammonia (as total ammonia-N), mg/l, Max)	-	0	-
table 2 sl.no 3(Anionic detergents (as MBAS), mg/l, Max)	-	0	-
table 2 sl.no 4(Barium (as Ba), mg/l, Max)	-	0	-
table 2 sl.no 5(Boron (as B), mg/l, Max)	-	0	-
table 2 sl.no 6(Calcium (as Ca), mg/l, Max)	-	0	-
table 2 sl.no 7(Calcium (as Ca), mg/l, Max)	-	0	-
table 2 sl.no 8(Calcium (as Ca), mg/l, Max)	-	0	-
table 2 sl.no 9(Copper (as Cu), mg/l, Max)	-	0	-
table 2 sl.no 10( Fluoride (as F) mg/l, Max)	-	0	-
table 2 sl.no 11(Free residual chlorine, mg/l, Min)	-	0	-
table 2 sl.no 12(Iron (as Fe), mg/l, Max)	-	0	-
table 2 sl.no 13(Magnesium (as Mg), mg/l, Max)	-	0	-
table 2 sl.no 14(Manganese (as Mn), mg/l, Max)	-	0	-
table 2 sl.no 15(Mineral oil, mg/l, Max)	-	0	-
table 2 sl.no 16(Nitrate (as NO3), mg/l, Max)	-	0	-
table 2 sl.no 17(Phenolic compounds (as C6H5OH), mg/l, Max)	-	0	-
table 2 sl.no 18(Selenium (as Se), mg/l, Ma)	-	0	-
table 2 sl.no 19(Silver (as Ag), mg/l, Max)	-	0	-
table 2 sl.no 20(Sulphate (as SO4) mg/l, Max)	-	0	-
table 2 sl.no 21(Sulphide (as H2S), mg/l, Max)	-	0	-
table 2 sl.no 22(Total alkalinity as calcium carbonate, mg/l, Max)	-	0	-
table 2 sl.no 23(Total hardness (as CaCO3 mg/l, Max)	-	0	-
table 2 sl.no 24(Zinc (as Zn), mg/l, Max)	-	0	-
TABLE 3 sl no 1(Cadmium (as Cd), mg/l, Max)	-	0	-
TABLE 3 sl no 2(Cyanide (as CN), mg/l, Max)	-	0	-
TABLE 3 sl no 3(Lead (as Pb), mg/l, Max)	-	0	-
TABLE 3 sl no 4(Mercury (as Hg), mg/l, Max)	-	0	-
TABLE 3 sl no 5( Molybdenum (as Mo), mg/l, Max)	-	0	-
TABLE 3 sl no 6(Nickel (as Ni), mg/l, Max)	-	0	-
TABLE 3 sl no 7(Pesticides, µg/l, Max)	-	0	-
TABLE 3 sl no 8(Polychlorinated biphenyls, mg/l,)	-	0	-
TABLE 3 sl no 9(Polynuclear aromatic hydro-carbons (as PAH), mg/l, Max)	-	0	-
TABLE 3 sl no 10(Total arsenic (as As), mg/l, Max)	-	0	-
TABLE 3 sl no 11(Total chromium (as Cr), mg/l, Max)	-	0	-
TABLE 3 sl no 12(Bromoform, mg/l, Max)	-	0	-
TABLE 3 sl no 13(Dibromochloromethane,)	-	0	-
TABLE 3 sl no 14(Dibromochloromethane,mg/l, Max)	-	0	-
TABLE 3 sl no 15(Chloroform, mg/l, Max)	-	0	-
TABLE 5 sl no 1(Alachlor)	-	0	-
TABLE 5 sl no 2(Atrazine)	-	0	-
TABLE 5 sl no 3(Atrazine)	-	0	-
TABLE 5 sl no 4( Alpha HCH)	-	0	-
TABLE 5 sl no 5(Beta HCH)	-	0	-
TABLE 5 sl no 6(Butachlor)	-	0	-
TABLE 5 sl no 7(Chlorpyriphos)	-	0	-
TABLE 5 sl no 8(Delta HCH)	-	0	-
TABLE 5 sl no 9(2,4- Dichlorophenoxyacetic acid)	-	0	-
TABLE 5 sl no 10( DDT (o, p and p, p – Isomers of DDT, DDE and DDD))	-	0	-
TABLE 5 sl no 11(Endosulfan (alpha, beta, and sulphate))	-	0	-
TABLE 5 sl no 12( Ethion)	-	0	-
TABLE 5 sl no 13(Gamma — HCH (Lindane))	-	0	-
TABLE 5 sl no 14( Isoproturon)	-	0	-
TABLE 5 sl no 15(Malathion)	-	0	-
TABLE 5 sl no 16(Methyl parathion)	-	0	-
TABLE 5 sl no 17(Monocrotophos)	-	0	-
TABLE 5 sl no 18(Phorate)	-	0	-
TABLE 6 sl no 1(All water intended for drinking: a) E. coli or thermotolerant coliform bacteri)	-	0	-
TABLE 6 sl no 2(Treated water entering the distribution system: a) E. coli or thermotolerant coliform bacteria)	-	0	-
TABLE 6 sl no 3(b) Total coliform bacteria)	-	0	-
TABLE 6 sl no 4(Treated water in the distribution system: a) E. coli or thermotolerant coliform bacteria)	-	0	-
TABLE 6 sl no 5(b) Total coliform bacteria)	-	0	-
4.3.8 (Cryptosporidium )	-	0	-
4.2.7(4.2.7 MS2 phage)	-	0	-
4, table 4, i, a)(Alpha emitters)	-	1250	-
4, table 4, i, b)(Beta emitters)	-	1250	-
Table 3, x)(Uranium)	-	0	-
Table 5(Aldrin and Dieldrin )	-	0	-
Table 3 (Clause 4)xii) Trihalomethanes: (b)(Bromodichloromethane)	-	0	-
Table 1 clause(iv)(Taste)	-	0	-
4, Table 2, Sr. no. vii(Chloramines)	-	0	-
4, Table 2, Sr.no. viii(Chloride)	-	0	-
4.3.9(Giardia)	-	0	-
4 ,Table (1), (i)(Colour, Hazen units, Max)	-	0	-
4 ,Table (1), (iI)(Odour)	-	0	-
4 ,Table (1), (Iii)(pH value)	-	0	-
4 ,Table (1), (iv)(Taste)	-	0	-
4 ,Table (1), (v)(Turbidity, NTU, Max)	-	0	-
4 ,Table (1), (vi)(Total dissolved solids, mg/l,Max)	-	0	-
4, Table (2), (i)(Aluminium (as Al), mg/l, Max)	-	0	-
4, Table (2), (ii)(Ammonia (as total ammonia-N),mg/l, Max)	-	0	-
4, Table (2), (iii)(Anionic detergents (as MBAS) mg/l, Max)	-	0	-
4, Table (2), (iv)(Barium (as Ba), mg/l, Max)	-	0	-
4, Table (2), (v)(Boron (as B), mg/l, Max)	-	0	-
4, Table (2), (vi)(Calcium (as Ca), mg/l, Max)	-	0	-
4, Table (2), (vii)(Chloramines (as Cl2 ), mg/l, Max)	-	0	-
4, Table (2), (viii)(Chloride (as Cl), mg/l, Max)	-	0	-
4, Table (2), (ix)(Copper (as Cu), mg/l, Max)	-	0	-
4, Table (2), (x)(Fluoride (as F) mg/l, Max)	-	0	-
4, Table (2), (xi)(Free residual chlorine, mg/l, Min)	-	0	-
4, Table (2), (xii)(Iron (as Fe), mg/l, Max)	-	0	-
4, Table (2), (xiii)(Magnesium (as Mg), mg/l, Max)	-	0	-
4, Table (2), (xiv)(Manganese (as Mn), mg/l, Max)	-	0	-
4, Table (2), (xv)(Mineral oil, mg/l, Max)	-	0	-
4, Table (2), (xvi)(Nitrate (as NO3), mg/l, Max )	-	0	-
4, Table (2), (xvii)(Phenolic compounds (as C6H5OH),mg/l, Max)	-	0	-
4, Table (2), (xviii)(Selenium (as Se), mg/l, Max)	-	0	-
4, Table (2), (xix)(Silver (as Ag), mg/l, Max)	-	0	-
4, Table (2), (xx)(Sulphate (as SO4 ) mg/l, Max)	-	0	-
4, Table (2), (xxi)(Sulphide (as H2 S), mg/l, Max)	-	0	-
4, Table (2), (xxii)(Total alkalinity as calcium carbonate, mg/l, Max)	-	0	-
4, Table (2), (xxiii)(Total hardness (as CaCO3 ), mg/l, Max)	-	0	-
4, Table (2), (xxiv)(Zinc (as Zn), mg/l, Max)	-	0	-
4, Table (3), (i)(Cadmium (as Cd), mg/l, Max)	-	0	-
4, Table (3), (ii)(Cyanide (as CN), mg/l, Max)	-	0	-
4, Table (3), (iii)(Lead (as Pb), mg/l, Max)	-	0	-
4, Table (3), (iv)(Mercury (as Hg), mg/l, Max)	-	0	-
4, Table (3), (v)(Molybdenum (as Mo), mg/l, Max)	-	0	-
4, Table (3), (vi)(Nickel (as Ni), mg/l, Max)	-	0	-
4, Table (3), (vii)(Pesticides, µg/l, Max)	-	0	-
4, Table (3), (viii)(Polychlorinated biphenyls, mg/l, Max)	-	0	-
4, Table (3), (ix)(Polynuclear aromatic hydro-carbons (as PAH), mg/l, Max)	-	0	-
4, Table (3), (x)(Total arsenic (as As), mg/l, Max)	-	0	-
4, Table (3), (xi)(Total chromium (as Cr), mg/l, Max)	-	0	-
4, Table (3), (xii), (a)(Bromoform, mg/l, Max)	-	0	-
4, Table (3), (xii), (b)(Dibromochloromethane, mg/l, Max)	-	0	-
4, Table (3), (xii), (c)(Bromodichloromethane, mg/l, Max)	-	0	-
4, Table (3), (xii), (d)(Chloroform, mg/l, Max)	-	0	-
4, Table (4), (i), (a)(Alpha emitters Bq/l, Max)	-	2500	-
4.3(Biological Requirements)	-	0	-
4 ,Table (1), (i)(Colour, Hazen units, Max)	-	0	-
4 ,Table (1), (iI)(Odour)	-	0	-
4 ,Table (1), (Iii)(pH value)	-	0	-
4 ,Table (1), (iv)(Taste)	-	0	-
4 ,Table (1), (v)(Turbidity, NTU, Max)	-	0	-
4 ,Table (1), (vi)(Total dissolved solids, mg/l,Max)	-	0	-
4, Table (2), (i)(Aluminium (as Al), mg/l, Max)	-	0	-
4, Table (2), (ii)(Ammonia (as total ammonia-N),mg/l, Max)	-	0	-
4, Table (2), (iii)(Anionic detergents (as MBAS) mg/l, Max)	-	0	-
4, Table (2), (iv)(Barium (as Ba), mg/l, Max)	-	0	-
4, Table (2), (v)(Boron (as B), mg/l, Max)	-	0	-
4, Table (2), (vi)(Calcium (as Ca), mg/l, Max)	-	0	-
4, Table (2), (vii)(Chloramines (as Cl2 ), mg/l, Max)	-	0	-
4, Table (2), (viii)(Chloride (as Cl), mg/l, Max)	-	0	-
4, Table (2), (ix)(Copper (as Cu), mg/l, Max)	-	0	-
4, Table (2), (x)(Fluoride (as F) mg/l, Max)	-	0	-
4, Table (2), (xi)(Free residual chlorine, mg/l, Min)	-	0	-
4, Table (2), (xii)(Iron (as Fe), mg/l, Max)	-	0	-
4, Table (2), (xiii)(Magnesium (as Mg), mg/l, Max)	-	0	-
4, Table (2), (xiv)(Manganese (as Mn), mg/l, Max)	-	0	-
4, Table (2), (xv)(Mineral oil, mg/l, Max)	-	0	-
4, Table (2), (xvi)(Nitrate (as NO3), mg/l, Max )	-	0	-
4, Table (2), (xvii)(Phenolic compounds (as C6H5OH),mg/l, Max)	-	0	-
4, Table (2), (xviii)(Selenium (as Se), mg/l, Max)	-	0	-
4, Table (2), (xix)(Silver (as Ag), mg/l, Max)	-	0	-
4, Table (2), (xx)(Sulphate (as SO4 ) mg/l, Max)	-	0	-
4, Table (2), (xxi)(Sulphide (as H2 S), mg/l, Max)	-	0	-
4, Table (2), (xxii)(Total alkalinity as calcium carbonate, mg/l, Max)	-	0	-
4, Table (2), (xxiii)(Total hardness (as CaCO3 ), mg/l, Max)	-	0	-
4, Table (2), (xxiv)(Zinc (as Zn), mg/l, Max)	-	0	-
4, Table (3), (i)(Cadmium (as Cd), mg/l, Max)	-	0	-
4, Table (3), (ii)(Cyanide (as CN), mg/l, Max)	-	0	-
4, Table (3), (iii)(Lead (as Pb), mg/l, Max)	-	0	-
4, Table (3), (iv)(Mercury (as Hg), mg/l, Max)	-	0	-
4, Table (3), (v)(Molybdenum (as Mo), mg/l, Max)	-	0	-
4, Table (3), (vi)(Nickel (as Ni), mg/l, Max)	-	0	-
4, Table (3), (vii)(Pesticides, µg/l, Max)	-	0	-
4, Table (3), (viii)(Polychlorinated biphenyls, mg/l, Max)	-	0	-
4, Table (3), (ix)(Polynuclear aromatic hydro-carbons (as PAH), mg/l, Max)	-	0	-
4, Table (3), (x)(Total arsenic (as As), mg/l, Max)	-	0	-
4, Table (3), (xi)(Total chromium (as Cr), mg/l, Max)	-	0	-
4, Table (3), (xii), (a)(Bromoform, mg/l, Max)	-	0	-
4, Table (3), (xii), (b)(Dibromochloromethane, mg/l, Max)	-	0	-
4, Table (3), (xii), (c)(Bromodichloromethane, mg/l, Max)	-	0	-
4, Table (3), (xii), (d)(Chloroform, mg/l, Max)	-	0	-
4, Table (4), (i), (a)(Alpha emitters Bq/l, Max)	-	1250	-
4, Table (4), (i), (b)(Beta emitters Bq/l, Max)	-	1250	-
4.1(Bacteriological Requirements)	-	0	-
4.2(Virological Requirements)	-	0	-
4.3(Biological Requirements)	-	0	-
4, table 4, i, a)(Alpha emitters)	-	1250	-
4, table 4, i, b)(Beta emitters)	-	1250	-
4, Table (4), (i), (a)(Alpha emitters Bq/l, Max)	-	1250	-
4, Table (4), (i), (b)(Beta emitters Bq/l, Max)	-	1250	-
4, Table (4), (i), (a)(Alpha emitters Bq/l, Max)	-	1250	-
4, table 4, i, a)(Alpha emitters)	-	1250	-
4, table 4, i, b)(Beta emitters)	-	1250	-
4, Table (4), (i), (a)(Alpha emitters Bq/l, Max)	-	1250	-
4, Table (4), (i), (b)(Beta emitters Bq/l, Max)	-	1250	-
4, Table (4), (i), (a)(Alpha emitters Bq/l, Max)	-	1250	-

Complete

31 Dec, 2023

Included w.e.f. 15.07.2024 For Alpha Emitters and Beta Emitters only.

IS 13428 (2005)

Packaged natural mineral water specification (Second Revision)

Alpha & Beta emitters

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Escherichia coli(or thermotolerant bacteria))	-	0	-
6.1.2(Coliform , bacteria)	-	0	-
6.1.3(Faecal Streptococci )	-	0	-
6.1.3(Staphylococcus Aureus)	-	0	-
6.1.4(Sulphite Reducing Anaerobes )	-	0	-
6.1.5(Pseudomonas Aeruginosa )	-	0	-
6.1.6(Yeast and Mould )	-	0	-
6.1.7(Salmonella )	-	0	-
6.1.7(Shigella)	-	0	-
6.1.8(Vibrio cholera )	-	0	-
6.1.8(Vibrio parahemolyticus)	-	0	-
6.2 Table-1 i(Colour)	-	0	-
6.2 Table-1 ii(Odour)	-	0	-
6.2 Table-1 iii(Taste)	-	0	-
6.2 Table-1 iv(Turbidity)	-	0	-
6.2 Table-1 v(Total dissolved solids)	-	0	-
6.2 Table-1 vi(pH)	-	0	-
6.2 Table-2 i(Nitrate (as NO3))	-	0	-
6.2 Table-2 ii(Nitrite (as NO2))	-	0	-
6.2 Table-2 iii(Sulphide (as H2S))	-	0	-
6.2 Table-2 iv(Manganese (as Mn))	-	0	-
6.2 Table-2 v(Copper (as Cu))	-	0	-
6.2 Table-2 vi(Zinc (as Zn))	-	0	-
6.2 Table-2 vii(Flouride (as F))	-	0	-
6.2 Table-2 viii(Barium (as Ba))	-	0	-
6.2 Table-2 ix(Antimony (as Sb))	-	0	-
6.2 Table-2 x(Borates (as B))	-	0	-
6.2 Table-2 xi(Silver (as Ag))	-	0	-
6.2 Table-2 xii(Chloride (as Cl))	-	0	-
6.2 Table-2 xiii(Sulphate (as SO4),)	-	0	-
6.2 Table-2 xiv(Magnesium (as Mg))	-	0	-
6.2 Table-2 xv(Calcium (as Ca))	-	0	-
6.2 Table-2 xvi(Sodium (as Na))	-	0	-
6.2 Table-2 xvii(Alkalinity (as HCO3))	-	0	-
6.2 Table-2 xviii(Selenium (as Se))	-	0	-
6.2 Table-2 xix(Mineral Oil)	-	0	-
6.2 Table-2 xx(Phenolic compounds (as C6H5OH))	-	0	-
6.2 Table-2 xxi(Anionic surface active agents (as MBAS))	-	0	-
6.2 Table-3 i(Arsenic (as As))	-	0	-
6.2 Table-3 ii(Cadmium (as Cd))	-	0	-
6.2 Table-3 iii(Cyanide (as CN))	-	0	-
6.2 Table-3 iv(Chromium (as Cr))	-	0	-
6.2 Table-3 v(Mercury (as Hg))	-	0	-
6.2 Table-3 vi(Lead (as Pb)	-	0	-
6.2 Table-3 vii(Nickel (as Ni))	-	0	-
6.2 Table-3 viii(Polychlorinated biphenyle (PCB))	-	0	-
6.2 Table-3 ix(Polynuclear aromatic hydrocarbons)	-	0	-
6.3(o,p DDT)	-	0	-
6.3(p,p DDT)	-	0	-
6.3(o,p DDE)	-	0	-
6.3(p, DDE)	-	0	-
6.3(o,p DDD)	-	0	-
6.3(p,p DDD)	-	0	-
6.3(γ-HCH (Lindane))	-	0	-
6.3(α-HCH)	-	0	-
6.3(β-HCH)	-	0	-
6.3(δ-HCH)	-	0	-
6.3(α Endosulfan)	-	0	-
6.3(β Endosulfan)	-	0	-
6.3(Endosulfan Sulphate)	-	0	-
6.3(Monocrotophos)	-	0	-
6.3(Ethion)	-	0	-
6.3(Chlorpyrifos)	-	0	-
6.3(Phorate)	-	0	-
6.3(Phorate sulphoxide)	-	0	-
6.3(phorate sulphone)	-	0	-
6.3(2,4-D)	-	0	-
6.3(Butachlor)	-	0	-
6.3(Isoproturon)	-	0	-
6.3(Alachlor)	-	0	-
6.3(Atrazine)	-	0	-
6.3(Methyl Parathion)	-	0	-
6.3(Methyl Paraoxon)	-	0	-
6.3(Malathion)	-	0	-
6.3(Aldrin)	-	0	-
6.3(Dieldrin)	-	0	-
6.2 Table-4 i (Alpha emitters)	-	2500	-
6.2 Table-4 iI (Beta emitters)	-	2500	-
6.2-Table 1-(v)(Total Dissolved Solids / IS : 3025 (Part 16))	-	0	-
Table 3, x)(Uranium)	-	0	-
Table 3, x) (radioactive)(Uranium)	-	0	-
(Clause 6.3)(DDT(0, P &, p, p-isomers of DDT, DOE&, DOD))	-	0	-
6.1.4(Sulphite Reducing Anaerobes)	-	0	-
6.3(Malaoxon)	-	0	-
6.2 Table-4 i (Alpha emitters)	-	2500	-
6.2 Table-4 iI (Beta emitters)	-	2500	-
6.2 Table-4 i (Alpha emitters)	-	2500	-
6.2 Table-4 iI (Beta emitters)	-	2500	-

Complete

31 Dec, 2023

Included w.e.f. 15.07.2024 For Alpha Emitters and Beta Emitters only.

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

All

46400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	500	-
10 (elec)(Stranding)	-	600	-
10 (elec)(Stranding)	-	600	-
10 (elec)(Stranding)	-	600	-
10 (mech)(Stranding)	-	600	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	1600	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	1600	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	1600	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	1600	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1200	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1200	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1200	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1200	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	1200	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	1200	-
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	1200	-
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	1200	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1200	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1200	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	25000	3 Wire Al Conductor-5000 7 Wire Al Conductor-6250 13 Wire Al Conductor-7500 19Wire Al Conductor-10000 37Wire Al Conductor-15000 49Wire Al Conductor-18750 54Wire Al Conductor-22500 61Wire Al Conductor-25000
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	25000	3 Wire Al Conductor-5000 7 Wire Al Conductor-6250 13 Wire Al Conductor-7500 19Wire Al Conductor-10000 37Wire Al Conductor-15000 49Wire Al Conductor-18750 54Wire Al Conductor-22500 61Wire Al Conductor-25000
13.7.2 (chem)(Mass of Zinc coating)	-	1000	-
13.7.2 (chem)(Uniformity of Zinc coating)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	-
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.9 (elec)(Surface condition test)	-	600	-
13.10 (elec)(Ultimate breaking load)	-	1600	-
13.11 (elec)(Stress-strain test)	-	1600	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	-
13.7.2 (elec)(Mass of Zinc coating)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1200	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1200	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1200	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1200	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1600	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	1600	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1600	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1600	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	-
13.7.2 (elec)(Mass of Zinc coating)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1200	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1200	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1200	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1200	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1600	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	1600	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1600	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	1600	-
10 (elec)(Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	500	-
4.1(Resistivity)	-	25000	3 Wire Al Conductor-5000 7 Wire Al Conductor-6250 13 Wire Al Conductor-7500 19Wire Al Conductor-10000 37Wire Al Conductor-15000 49Wire Al Conductor-18750 54Wire Al Conductor-22500 61Wire Al Conductor-25000
4.2(Density)	-	1000	-
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	1000	-
4.4(Coefficient of Linear Expansion)	-	500	-
5.1(Density)	-	1000	-
5.2(Coefficient of Linear Expansion)	-	500	-
14.2(a), 8.2.1(Sizes)	-	500	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	500	-
10 (elec)(Stranding)	-	500	-
10 (elec)(Stranding)	-	500	-
10 (elec)(Stranding)	-	500	-
10 (mech)(Stranding)	-	500	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	1600	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	1600	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	1600	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	1600	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1200	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1200	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1200	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1200	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	1200	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	1200	-
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	1200	-
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	1200	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1200	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1200	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	25000	3 Wire Al Conductor-5000 7 Wire Al Conductor-6250 13 Wire Al Conductor-7500 19Wire Al Conductor-10000 37Wire Al Conductor-15000 49Wire Al Conductor-18750 54Wire Al Conductor-22500 61Wire Al Conductor-25000
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	25000	3 Wire Al Conductor-5000 7 Wire Al Conductor-6250 13 Wire Al Conductor-7500 19Wire Al Conductor-10000 37Wire Al Conductor-15000 49Wire Al Conductor-18750 54Wire Al Conductor-22500 61Wire Al Conductor-25000
13.7.2 (chem)(Mass of Zinc coating)	-	1000	-
13.7.2 (chem)(Uniformity of Zinc coating)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	-
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.9 (elec)(Surface condition test)	-	600	-
13.10 (elec)(Ultimate breaking load)	-	1600	-
13.11 (elec)(Stress-strain test)	-	1600	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	-
13.7.2 (elec)(Mass of Zinc coating)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1200	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1200	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1200	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1200	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1600	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	1600	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1600	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1600	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	-
13.7.2 (elec)(Mass of Zinc coating)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1200	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1200	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1200	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1200	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1600	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	1600	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1600	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	1600	-
10 (elec)(Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	500	-
4.1(Resistivity)	-	25000	3 Wire Al Conductor-5000 7 Wire Al Conductor-6250 13 Wire Al Conductor-7500 19Wire Al Conductor-10000 37Wire Al Conductor-15000 49Wire Al Conductor-18750 54Wire Al Conductor-22500 61Wire Al Conductor-25000
4.2(Density)	-	1000	-
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	1000	-
4.4(Coefficient of Linear Expansion)	-	500	-
5.1(Density)	-	1000	-
5.2(Coefficient of Linear Expansion)	-	500	-
14.2(a), 8.2.1(Sizes)	-	500	-
7(FREEDOM FROM DEFECTS)	-	500	-
6.2(zinc Purity)	-	5000	-
9(Joint in wires)	-	600	-
6.1.1(Aluminum wires shall conform to IS 5484)	-	1200	-
6.1.2(The mechanical properties of wire shall comply with the requirements given in Table 2)	-	500	-
6.2(It shall conform to and satisfy all the requirements of IS 209)	-	500	-
8.2.2(Calculated resistance)	-	25000	3 Wire Al Conductor-5000 7 Wire Al Conductor-6250 13 Wire Al Conductor-7500 19Wire Al Conductor-10000 37Wire Al Conductor-15000 49Wire Al Conductor-18750 54Wire Al Conductor-22500 61Wire Al Conductor-25000
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	500	-
10 (elec)(Stranding)	-	500	-
10 (elec)(Stranding)	-	500	-
10 (elec)(Stranding)	-	500	-
10 (mech)(Stranding)	-	500	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	1600	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	1600	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	1600	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	1600	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1200	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1200	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1200	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1200	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	1200	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	1200	-
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	1200	-
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	1200	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1200	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1200	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	25000	3 Wire Al Conductor-5000 7 Wire Al Conductor-6250 13 Wire Al Conductor-7500 19Wire Al Conductor-10000 37Wire Al Conductor-15000 49Wire Al Conductor-18750 54Wire Al Conductor-22500 61Wire Al Conductor-25000
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	25000	3 Wire Al Conductor-5000 7 Wire Al Conductor-6250 13 Wire Al Conductor-7500 19Wire Al Conductor-10000 37Wire Al Conductor-15000 49Wire Al Conductor-18750 54Wire Al Conductor-22500 61Wire Al Conductor-25000
13.7.2 (chem)(Mass of Zinc coating)	-	1000	-
13.7.2 (chem)(Uniformity of Zinc coating)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	-
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.9 (elec)(Surface condition test)	-	500	-
13.10 (elec)(Ultimate breaking load)	-	1600	-
13.11 (elec)(Stress-strain test)	-	1600	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	-
13.7.2 (elec)(Mass of Zinc coating)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1200	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1200	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1200	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1200	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1600	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	1600	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1600	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1600	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	-
13.7.2 (elec)(Mass of Zinc coating)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1200	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1200	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1200	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1200	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1200	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1600	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	1600	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1600	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	1600	-
10 (elec)(Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	500	-
4.1(Resistivity)	-	25000	3 Wire Al Conductor-5000 7 Wire Al Conductor-6250 13 Wire Al Conductor-7500 19Wire Al Conductor-10000 37Wire Al Conductor-15000 49Wire Al Conductor-18750 54Wire Al Conductor-22500 61Wire Al Conductor-25000
4.2(Density)	-	1000	-
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	1000	-
4.4(Coefficient of Linear Expansion)	-	1000	-
5.1(Density)	-	1000	-
5.2(Coefficient of Linear Expansion)	-	1000	-
14.2(a), 8.2.1(Sizes)	-	500	-
7(FREEDOM FROM DEFECTS)	-	500	-
6.2(zinc Purity)	-	5000	-
9(Joint in wires)	-	600	-
6.1.1(Aluminum wires shall conform to IS 5484)	-	1200	-
6.1.2(The mechanical properties of wire shall comply with the requirements given in Table 2)	-	1200	-
6.2(It shall conform to and satisfy all the requirements of IS 209)	-	5000	-
8.2.2(Calculated resistance)	-	25000	3 Wire Al Conductor-5000 7 Wire Al Conductor-6250 13 Wire Al Conductor-7500 19Wire Al Conductor-10000 37Wire Al Conductor-15000 49Wire Al Conductor-18750 54Wire Al Conductor-22500 61Wire Al Conductor-25000

Complete

31 Dec, 2023

Included w.e.f. 05.08.2024 only for Total sectional area upto 425.2 Sq. mm

IS 15063 (2001)

Alkaline manganese dioxide cells - Specification

All

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Delayed Life Test)	-	5000	-
12(Leakage Test)	-	1500	-
11, 11.1, 11.3(Intermittent Discharge Initial Application Test (Table 5E, 6LR61))	-	3500	-
11, 11.1, 11.3(Intermittent Discharge Initial Application Test (Table 5D, LR20))	-	3500	-
11, 11.1, 11.3(Intermittent Discharge Initial Application Test (Table 5C, LR14))	-	3500	-
11, 11.1, 11.3(Intermittent Discharge Initial Application Test (Table 5B, LR6))	-	3500	-
11, 11.1, 11.3(Intermittent Discharge Initial Application Test (Table 5A, LR03))	-	3500	-
11, 11.1, 11.2(Continuous Discharge Initial Life Test)	-	3500	-
10.2.3(Standard Atmospheric Condition of Testing)	-	0	-
10.1(General)	-	0	-
9(Marking)	-	500	-
8(Terminals)	-	500	-
7(Battery Connections)	-	0	-
6(Materials and Construction)	-	500	-
5(Dimensions)	-	1000	-
4(Designation )	-	0	-

Complete

31 Dec, 2023

Included w.e.f. 29.08.2024

IS 638 (1979)

Specification for sheet rubber jointing and rubber insertion jointing (Second Revision)

Type A & Type B

14075 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Types)	-	600	-
2.2(Grades)	-	600	-
3.1.1(Jointing Material)	-	600	-
3.1.2(Composition of Rubber Compound)	-	0	-
3.1.3(Fabric Reinforcementfor Rubber Insertion Jointing)	-	600	-
3.2.2(Thickness and Number of Plies)	-	1300	-
3.2.2.1(Positon of Plies)	-	600	-
3.3(Size of Sheet Rubber Jointing and Rubber Insertion Jointing)	-	600	-
3.4(Tensile Strength and Elongation at Break)	-	1300	-
3.5.1(Jointing to be Used for Joints Subjects to Water and Air Pressure)	-	5300	-
3.5.2(Jointing to be Used for Joints Subjected to Steam Pressure)	-	5300	-
3.6.1(Jointing to be Used for Joints Subject to Water and Air Pressure)	-	1300	-
3.6.2(Jointing to be Used for Joints Subjects to Steam Pressure)	-	1300	-
3.7(Resistance to Bending)	-	1200	-
3.8(Adhesive)	-	1875	-
3.9(Hardness)	-	1300	-
4(Marking and Packing)	-	600	-
2.1(Types)	-	600	-
2.2(Grades)	-	600	-
3.1.1(Jointing Material)	-	600	-
3.1.3(Fabric Reinforcementfor Rubber Insertion Jointing)	-	600	-
3.2.2(Thickness and Number of Plies)	-	1300	-
3.2.2.1(Positon of Plies)	-	600	-
3.3(Size of Sheet Rubber Jointing and Rubber Insertion Jointing)	-	600	-
3.4(Tensile Strength and Elongation at Break)	-	1300	-
3.5.1(Jointing to be Used for Joints Subjects to Water and Air Pressure)	-	5300	-
3.5.2(Jointing to be Used for Joints Subjected to Steam Pressure)	-	5300	-
3.6.1(Jointing to be Used for Joints Subject to Water and Air Pressure)	-	1300	-
3.6.2(Jointing to be Used for Joints Subjects to Steam Pressure)	-	1200	-
3.7(Resistance to Bending)	-	1200	-
3.8(Adhesive)	-	1875	-
3.9(Hardness)	-	1300	-
4(Marking and Packing)	-	600	-
2.1(Types)	-	600	-
2.2(Grades)	-	600	-
3.1.1(Jointing Material)	-	600	-
3.1.3(Fabric Reinforcementfor Rubber Insertion Jointing)	-	600	-
3.2.2(Thickness and Number of Plies)	-	1300	-
3.2.2.1(Positon of Plies)	-	600	-
3.3(Size of Sheet Rubber Jointing and Rubber Insertion Jointing)	-	600	-
3.4(Tensile Strength and Elongation at Break)	-	1300	-
3.5.1(Jointing to be Used for Joints Subjects to Water and Air Pressure)	-	5300	-
3.5.2(Jointing to be Used for Joints Subjected to Steam Pressure)	-	5300	-
3.6.1(Jointing to be Used for Joints Subject to Water and Air Pressure)	-	1300	-
3.6.2(Jointing to be Used for Joints Subjects to Steam Pressure)	-	1300	-
3.7(Resistance to Bending)	-	1200	-
3.8(Adhesive)	-	1875	-
3.9(Hardness)	-	1300	-
4(Marking and Packing)	-	600	-

Complete

31 Dec, 2023

Included w.e.f. 01.08.2024

IS 319 (2007)

Free cutting brass bars, rods and section - Specification (Fifth Revision)

All

9100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Freedom from defects)	-	1000	-
7.0(Dimension and Tolerances)	-	0	-
8.1 Table 1(Cu)	-	5000	-
8.1 Table 1(Pb)	-	5000	-
8.1 Table 1(Fe)	-	5000	-
8.1 Table 1(Total other impurities excluding iron)	-	5000	-
8.1 Table 1(Zn)	-	5000	-
9.1 Table-2(Tensile Strength)	-	1200	-
9.1 Table-2(Elongation)	-	1200	-
9.2(Vickers Hardness)	-	1300	-
10.1(Mercurous Nitrate Test)	-	0	-
14(Marking)	-	600	-
14(Marking)	-	600	-

Complete

31 Dec, 2023

Included w.e.f. 13.05.2024

IS 278 (2009)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

All Types

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Type A/Type B)	-	600	-
5 Table-1(Sizes Diameter of Line wire)	-	1300	-
5 Table-1(Sizes Diamater of Point wire)	-	1300	-
5 Table-1(Sizes Mass of Completed barbed wire)	-	1300	-
5 Table-1(Sizes Distance between two barbs)	-	1300	-
5 Table-1(Sizes No. of Lays between the two consequtive barbs)	-	1300	-
7.1(Manufacture)	-	600	-
7.2(Manufacture)	-	600	-
7.2(Manufacture)	-	600	-
7.3(Manufacture)	-	600	-
8(CHROMATING)	-	0	-
9.1(Freedom from defects)	-	1000	-
9.2(Freedom from defects)	-	1000	-
9.2(Freedom from defects)	-	1000	-
9.2(Freedom from defects)	-	1000	-
12.1(Tensile Strength)	-	1200	-
12.1(Breaking load)	-	1300	-
12.2.1(Mass of zinc coating (line wire))	-	2000	-
12.2.2(Mass of zinc coating (point wire))	-	2000	-
12.2(Uniformity of zinc coating)	-	2000	-
12.3(Ductility)	-	1200	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 7.2(Cut Angle)	-	600	-
Cl. 7.2(Length of Barbs)	-	1300	-
Cl. 7.2(Finishing of Barbs)	-	600	-
Cl. 7.1(General)	-	600	-
11(Sampling)	-	0	-
13(Marking)	-	600	-
4(Type A/Type B)	-	1300	-
5 Table-1(Sizes Diameter of Line wire)	-	1300	-
5 Table-1(Sizes Diamater of Point wire)	-	1300	-
5 Table-1(Sizes Mass of Completed barbed wire)	-	1300	-
5 Table-1(Sizes Distance between two barbs)	-	1300	-
5 Table-1(Sizes No. of Lays between the two consequtive barbs)	-	1300	-
7.1(Manufacture)	-	600	-
7.2(Manufacture)	-	600	-
7.2(Manufacture)	-	600	-
7.3(Manufacture)	-	600	-
8(CHROMATING)	-	0	-
9.1(Freedom from defects)	-	1000	-
9.2(Freedom from defects)	-	1000	-
9.2(Freedom from defects)	-	1000	-
9.2(Freedom from defects)	-	1000	-
12.1(Tensile Strength)	-	1200	-
12.1(Breaking load)	-	1300	-
12.2.1(Mass of zinc coating (line wire))	-	2000	-
12.2.2(Mass of zinc coating (point wire))	-	2000	-
12.2(Uniformity of zinc coating)	-	2000	-
12.3(Ductility)	-	1200	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 7.2(Cut Angle)	-	1300	-
Cl. 7.2(Length of Barbs)	-	1300	-
Cl. 7.2(Finishing of Barbs)	-	600	-
Cl. 7.1(General)	-	600	-
11(Sampling)	-	0	-
13(Marking)	-	600	-

Complete

31 Dec, 2023

Included w.e.f. 13.05.2024

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

Heavy,Medium,Light

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Outer Diameter, Thickness & Mass)	-	750	-
13.0(Leak Proof Test)	-	1875	-
Cl. 14.2(Bend Test (uto and including 50 mm NB))	-	1250	-
Cl 15(Workmanship)	-	625	-
17.0 & 17.1(Marking -IS:1239 (P1))	-	625	-
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	1500	-
Clause 14.1.1(Elongation Percent)	-	500	-
Cl. 14.3(Flattening test (Over 50 mm NB))	-	500	-
Clause 8.1 (Table3,4,5)(Nominal Bore)	-	500	-
6.2 AND AS PER IS 10748(CARBON)	-	1000	-
6.2 AND AS PER IS 10748(SULPHUR)	-	1000	-
Clause - 6.1.1, Table-1(PHOSPHURS)	-	1000	-
6.2 AND AS PER IS 10748(MANGANESE)	-	1000	-
6.2 AND AS PER IS 10748(CARBON EQUIVALENT)	-	1000	-
6.2 AND AS PER IS 10748(SILICON)	-	1000	-
6.2 AND AS PER IS 10748(ALUMINIUM)	-	1000	-
6.2 AND AS PER IS 513(MICRO ALLOY)	-	1000	-
6.2 AND AS PER IS 10748(NITROGEN)	-	1000	-
6.2 AND AS PER IS 10748(COPPER)	-	1000	-

Complete

31 Dec, 2023

IS 2312 (1967)

Specification for propeller type AC ventilating fans (First Revision)

9800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13.1(Marking)	-	0	-
13.1 (a)(Marking)	-	0	-
13.1 (b)(Marking)	-	0	-
13.1 (c)(Marking)	-	0	-
13.1 (d)(Marking)	-	0	-
13.1 (e)(Marking)	-	0	-
13.1 (f)(Marking)	-	0	-
13.1 (g)(Marking)	-	0	-
13.1 (h)(Marking)	-	0	-
13.1 (j)(Marking)	-	0	-
13.2(Marking)	-	0	-
13.4(Marking)	-	0	-
4.1(Rated Voltage)	-	0	-
5.1(Rated frequency)	-	0	-
10.1(Starting )	-	0	-
14.2 & 15.1(Air Delivery)	-	2000	-
14.3.A(Temperature-Rise (for motors))	-	0	-
14.3(Temperature-Rise)	-	500	-
14.3.B(Temperature-Rise (for regulators))	-	0	-
6.1(Design and General Construction)	-	0	-
6.3(Design and General Construction)	-	0	-
6.4(Design and General Construction)	-	0	-
6.5(Design and General Construction)	-	0	-
6.6(Design and General Construction)	-	0	-
6.7(Design and General Construction)	-	0	-
6.9(Design and General Construction)	-	0	-
10.1(Starting )	-	500	-
11.1(Interchangeability)	-	0	-
14.5(Mechanical Endurance (for regulators only))	-	0	-
14.7(ac leakage)	-	500	-
14.8(High voltage test)	-	1000	-
14.9(Insulation-Resistance)	-	1000	-
14.1(Earthing continuity)	-	500	-
14.11 & 15.1(Electrical Input)	-	800	-
14.12 & 16(Fan Speed)	-	500	-
3.1(Sizes )	-	0	-
14.4(Moistureproofness (for regulators only))	-	1000	-
14.4(Moistureproofness (for regulators only))	-	1000	-
14.1 & 14.6(Power factor)	-	500	-

Complete

31 Dec, 2023

Sweep size 300mm to 450 mm only

IS 903 (1993)

Specification for Fire Hose Delivery Couplings, Branch Pipe, Nozzles And Nozzle Spanner - Specificaion

LTB-2 & HTB-1

12150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Finish and workmanship)	-	1875	-
4(Marking)	-	2775	-
5.3(Size and Dimension )	-	1875	-
5.4(Hydraulic test requirement)	-	1875	-
6.3(Hydraulic test requirement)	-	1875	-
7.3(Hydraulic test requirement)	-	1875	-

Complete

31 Dec, 2023

Renewed w.e.f. 28-02-2022.

IS 7452 (1990)

Hot rolled steel sections for doors, windows and ventilators - Specification

T2,T3,T6,F2,F3,

4725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
cl 6(Dimensions)	-	1875	-
cl 7(MASS AND MASS TOLERANCE)	-	1000	-
cl 9(BEND TEST)	-	1250	-
cl 8(SURFACE FINISH)	-	600	-

Complete

31 Dec, 2023

IS 1538 (1993)

Cast iron fittings for pressure pipes for water, gas and sewage - Specification (Third Revision)

Rs.11125/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(tensile strength)	-	89	-
6.1(Brinell hardness tests)	-	89	-
8(Hydrostatic Test)	-	89	-
9.1,Table 2 & 3(DI)	-	89	-
9.1,Table 2 & 3(P)	-	89	-
9.1,Table 2 & 3(g)	-	89	-
9.1,Table 2 & 3(h)	-	89	-
9.1,Table 2 & 3(K)	-	89	-
9.1,Table 2 & 3(L)	-	89	-
9.1,Table 2 & 3(M)	-	89	-
9.1,Table 2 & 3(N)	-	89	-
9.1,Table 2 & 3(f)	-	89	-
9.1,Table 4(D)	-	89	-
9.1,Table 4(a)	-	89	-
9.1,Table 4(b)	-	89	-
9.1,Table 4(s)	-	89	-
9.1,Table 4(r)	-	89	-
9.1,Table 5(D)	-	89	-
9.1,Table 5(g)	-	89	-
9.1,Table 5(a)	-	89	-
9.1,Table 5(b)	-	89	-
9.1,Table 5(c)	-	89	-
9.1,Table 5(f)	-	89	-
9.1,Table 5(s)	-	89	-
9.1,Table 5(C)	-	89	-
9.1,Table 5(Holes No)	-	89	-
9.1,Table 5(Holes diameter)	-	89	-
9.1,Table 5(Diameterof Bolts)	-	89	-
9.1,Table 6(D)	-	89	-
9.1,Table 6(C)	-	89	-
9.1,Table 6(Holes No)	-	89	-
9.1,Table 6(Holes diameter)	-	89	-
9.1,Table 6(Diameterof Bolts)	-	89	-
9.1&11.1,Table 7,8&9(e)	-	89	-
9.1&11.1,Table 7,8&9(l)	-	89	-
9.1&11.1,Table 7,8&9(Mass (Approx))	-	89	-
9.1&11.1,Table 10 to13(e)	-	89	-
9.1&11.1,Table 10 to13(r)	-	89	-
9.1&11.1,Table 10 to13(a)	-	89	-
9.1&11.1,Table 10 to13(b)	-	89	-
9.1&11.1,Table 10 to13(Mass (Approx))	-	89	-
9.1&11.1,Table 14(Nominal Diameter)	-	89	-
9.1&11.1,Table 14(e)	-	89	-
9.1&11.1,Table 14(e1)	-	89	-
9.1&11.1,Table 14(l)	-	89	-
9.1&11.1,Table 14(h)	-	89	-
9.1&11.1,Table 14(Mass (Approx))	-	89	-
9.1&11.1,Table 15(e)	-	89	-
9.1&11.1,Table 15(l)	-	89	-
9.1&11.1,Table 15(Nominal Diameter)	-	89	-
9.1&11.1,Table 15(e1)	-	89	-
9.1&11.1,Table 15(k)	-	89	-
9.1&11.1,Table 15(Mass (Approx))	-	89	-
9.1&11.1,Table 16(e)	-	89	-
9.1&11.1,Table 16(l)	-	89	-
9.1&11.1,Table 16(h)	-	89	-
9.1&11.1,Table 16(Mass (Approx))	-	89	-
9.1&11.1,Table 17(e1)	-	89	-
9.1&11.1,Table 17(l1)	-	89	-
9.1&11.1,Table 17(Nominal Diameter)	-	89	-
9.1&11.1,Table 17(e2)	-	89	-
9.1&11.1,Table 17(l2)	-	89	-
9.1&11.1,Table 17(l3)	-	89	-
9.1&11.1,Table 17(l)	-	89	-
9.1&11.1,Table 17(Mass)	-	89	-
9.1&11.1,Table 18(a)	-	89	-
9.1&11.1,Table 18(P)	-	89	-
9.1&11.1,Table 18(Mass (Approx))	-	89	-
9.1&11.1,Table 19(DC)	-	89	-
9.1&11.1,Table 19(e)	-	89	-
9.1&11.1,Table 19(a)	-	89	-
9.1&11.1,Table 19(l)	-	89	-
9.1&11.1,Table 19(Mass (Approx))	-	89	-
9.1&11.1,Table 20(DI)	-	89	-
9.1&11.1,Table 20(h)	-	89	-
9.1&11.1,Table 20(Mass (Approx))	-	89	-
9.1&11.1,Table 21(e)	-	89	-
9.1&11.1,Table 21(r)	-	89	-
9.1&11.1,Table 21(a)	-	89	-
9.1&11.1,Table 21(b)	-	89	-
9.1&11.1,Table 21(Mass (Approx))	-	89	-
9.1&11.1,Table 22(e)	-	89	-
9.1&11.1,Table 22(r)	-	89	-
9.1&11.1,Table 22(a)	-	89	-
9.1&11.1,Table 22(b)	-	89	-
9.1&11.1,Table 22(c)	-	89	-
9.1&11.1,Table 22(a)	-	89	-
9.1&11.1,Table 22(f)	-	89	-
9.1&11.1,Table 22(g)	-	89	-
9.1&11.1,Table 23(e)	-	89	-
9.1&11.1,Table 23(r)	-	89	-
9.1&11.1,Table 23(a)	-	89	-
9.1&11.1,Table 23(l)	-	89	-
9.1&11.1,Table 23(Mass (Approx))	-	89	-
9.1&11.1,Table 24(e)	-	89	-
9.1&11.1,Table 24(l)	-	89	-
9.1&11.1,Table 24(Nominal Diameter)	-	89	-
9.1&11.1,Table 24(e1)	-	89	-
9.1&11.1,Table 24(h)	-	89	-
9.1&11.1,Table 24(Mass (Approx))	-	89	-
9.1&11.1,Table 25(e)	-	89	-
9.1&11.1,Table 25(l)	-	89	-
9.1&11.1,Table 25(h)	-	89	-
9.1&11.1,Table 25(Mass (Approx))	-	89	-
9.1&11.1,Table 26(e1)	-	89	-
9.1&11.1,Table 26(h1)	-	89	-
9.1&11.1,Table 26(Nominal Diameter)	-	89	-
9.1&11.1,Table 26(e2)	-	89	-
9.1&11.1,Table 26(l2)	-	89	-
9.1&11.1,Table 26(l3)	-	89	-
9.1&11.1,Table 26(l)	-	89	-
9.1&11.1,Table 26(Mass (Approx))	-	89	-
9.1&11.1,Table 27(dn)	-	89	-
9.1&11.1,Table 27(e1)	-	89	-
9.1&11.1,Table 27(b)	-	89	-
9.1&11.1,Table 27(l3)	-	89	-
9.1&11.1,Table 27(l2)	-	89	-
9.1&11.1,Table 27(e2)	-	89	-
9.1&11.1,Table 27(r)	-	89	-
9.1&11.1,Table 27(a)	-	89	-
9.1&11.1,Table 27(l1)	-	89	-
9.1&11.1,Table 27(Mass)	-	89	-
9.1&11.1,Table 28(D)	-	89	-
9.1&11.1,Table 28(t)	-	89	-

Complete

31 Dec, 2023

Renewed w.e.f. 28-02-2022.. Hydrostatic Test up 300 mm, above 300 mm test can be carried at Unit Premises

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

E250 ,275,300,350,410,450,550,600,650

12306 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7(Freedom from Defect)	-	200	-
Cl 15(Length, Width & Thickness)	-	200	-
Cl 18(Weight)	-	200	-
Cl 10.3(UTM)	-	200	-
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	200	-
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	200	-
Cl 11.3(Press)	-	200	-
Clause 12(Impact Test)	-	200	-
20(MARKING)	-	200	-
Clause - 5, 8.1 & 8.2(E650, ALUMINIUM)	-	0	-
Clause - 5, 8.1 & 8.2(E650, SILICON)	-	0	-
Clause - 5, 8.1 & 8.2(E650, NITROGEN)	-	0	-
Clause - 5, 8.1 & 8.2(E650 ,MANGANESE)	-	0	-
Clause - 5, 8.1 & 8.2(E650, PHOSPHURS)	-	0	-
Clause - 5, 8.1 & 8.2(E650, SULPHUR)	-	0	-
Clause - 5, 8.1 & 8.2(E650, CARBON)	-	0	-
Clause - 5, 8.1 & 8.2(E600, CARBON +EQUIVELENT )	-	0	-
Clause - 5, 8.1 & 8.2(E600, ALUMINIUM)	-	0	-
Clause - 5, 8.1 & 8.2(E600, SILICON)	-	0	-
Clause - 5, 8.1 & 8.2(E600, NITROGEN)	-	0	-
Clause - 5, 8.1 & 8.2(E600 ,MANGANESE)	-	0	-
Clause - 5, 8.1 & 8.2(E600, PHOSPHURS)	-	0	-
Clause - 5, 8.1 & 8.2(E600, SULPHUR)	-	0	-
Clause - 5, 8.1 & 8.2(E600, CARBON)	-	0	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Clause 8, Table 1, Note 2(Aluminium)	-	700	-
Clause 8, Table 1, Note 5(Niobium)	-	700	-
Clause 8, Table 1, Note 5(Titanium)	-	700	-
Clause 8, Table 1, Note 5(Nb+V+Ti)	-	700	-
Clause 8, Table 1, Note 6(Boron)	-	700	-
Clause 8, Table 1, Note 6(Cr+Ni)	-	700	-
Cl. 15 (Cl. 15 Channel Section: Sweep)	-	200	-
Cl. 15(Cl. 15 Channel Section: Camber)	-	200	-
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Concavity))	-	200	-
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Convexity))	-	400	-
Cl. 15(Cl. 15 Channel Section: Flange Out of Square)	-	400	-
Cl. 15(Cl. 15 Channel Section: Width of Flange)	-	400	-
Cl. 15(Cl. 15 Channel Section: Depth)	-	400	-
Cl. 15(Cl. 15 Square Bar: Out of Square)	-	400	-
Cl. 15(Cl. 15 Square Bar: Side Width: Minimum)	-	400	-
Cl. 15(Cl. 15 Square Bar: Side Width: Maximum)	-	400	-
15(Sectional Area)	-	400	-
15(Dimension -D)	-	400	-
15(Dimension -B)	-	400	-
15(Thickness - t)	-	306	-
15(Thickness - T)	-	200	-
15(Radius R1)	-	200	-
15(Radius R2)	-	200	-
15(Flange Slope)	-	200	-
15(Ovality)	-	200	-

Complete

31 Dec, 2023

Exclusion: Y Groove crackability, NDT

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Fe 415, Fe 415D, Fe 415S; Fe 500, Fe 500D, Fe 500S;

21875 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.1(UTM)	-	943.75	-
5.7(Pull-out test - IS:2770(P1))	-	943.75	-
Cl 7.2(Weight)	-	943.75	-
Cl. 8.1 Table 3(Elongation, percentage)	-	943.75	-
Clause 9.4(Rebend Test)	-	943.75	-
Cl. 9.3, Table 4(Bend Test )	-	943.75	-
Cl. 8.1 Table 3(TS/YS ratio)	-	943.75	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	943.75	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	943.75	-
Cl. 8.1 Table 3(Maximum Extension)	-	943.75	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	943.75	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	943.75	-
4.1(Sulphur and phosphorous)	-	222.22	-
4.1(CE)	-	222.22	-
4.1( Nitrogen%)	-	222.22	-
4.1(Ni)	-	222.22	-
4.1(Mo)	-	222.22	-
4.1(Cr)	-	222.22	-
4.1( Ti)	-	222.22	-
4.1(V)	-	222.22	-
4.1( Nb)	-	222.22	-
4.1( Aluminium %)	-	222.22	-
4.1( Copper %)	-	222.22	-
4.1(Silicon %)	-	222.22	-
4.1(Sulphur %)	-	222.22	-
4.1(Phosphorus %)	-	222.22	-
4.1(Manganese %)	-	222.22	-
4.1(Carbon %)	-	222.22	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	943.75	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	943.75	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	943.75	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	943.75	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	943.75	-
4.2(Niobium (Nb))	-	222.22	-
4.2(Boron (B))	-	222.22	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	943.75	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	222.22	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	943.75	-

Complete

31 Dec, 2023

Renewed w.e.f. 28-02-2022. Exclusion: Micro alloy element & AI, N, Pull out test.

IS 5312 : Part 1 (2004)

Swing Check Type Reflux (Non-Return] Valves for Water Works Purposes - Part 1 : Single-Door Pattern

3750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2(Manufacture Dimensions Table 2 )	-	750	-
6.9(Manufacture )	-	750	-
8.2(Hydrostatic Body Test )	-	750	-
8.3(Hydrostatic Seat Test)	-	750	-

Complete

31 Dec, 2023

Renewed w.e.f. 28-02-2022.Hydrostatic Test up 300 mm, above 300 mm test can be carried at Unit Premises

IS 13095 (1991)

Butterfly valves for general purposes

Size : 40 - 2000 mm

5875 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(NOMINAL PRESSURES)	-	1250	Cl. 7 + 12 + 13 + 14 + 16 + Cl. 21
12(DISC AND SHAFT)	-	1250	Cl. 7 + 12 + 13 + 14 + 16 + Cl. 21
13(SEATING AND LININGS)	-	1250	Cl. 7 + 12 + 13 + 14 + 16 + Cl. 21
14(BEARINGS)	-	1250	Cl. 7 + 12 + 13 + 14 + 16 + Cl. 21
16(OPERATION)	-	1250	Cl. 7 + 12 + 13 + 14 + 16 + Cl. 21
17.2(Body Test)	-	2500	Cl. 17.2 + 17.3
17.3(Seat Test)	-	2500	Cl. 17.2 + 17.3
17.4(Disc Strength Test)	-	625	Cl. 17.4 + 17.5
10.1 -Table1 (FACE TO FACE DIMENSIONS)	-	1500	Cl. 10.1 + 10.3

Complete

31 Dec, 2023

Renewed w.e.f. 28-02-2022.

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE, KOLKATA

111 &112, B. T. ROAD, KOLKATA, 24 PARAGANAS NORTH, West Bengal, 700108

9433304462 dctc-er@dcmsme.gov.in

Scope List