BIS - LIMS (Laboratory Information Management System)

TEKNOLAB QUALITY SERVICES PRIVATE LIMITED

PLOT RE 25A, SECTOR 69, IMT FARIDABAD, Ballabgarh, Faridabad, Haryana, 121004

9211870099 info@teknolab.in

Scope List

Reset

10 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 4665 : Part 2 : Sec 3 (2023)

Hand-held motor-operated electric tools - Safety Part 2 Particular requirements Section 3 grinders polishers and disk-type sanders

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General Requirements)	-	0	-
6(Void)	-	0	-
8(Marking and Instructions )	-	1000	-
9(Protection against access to live parts)	-	2000	-
10(Starting)	-	2000	-
11(Input and current)	-	2000	-
12(Heating)	-	3000	-
13(Leakage current)	-	2000	-
14(Moisture resistance)	-	3000	-
15( Electric strength)	-	2000	-
16(Overload protection of transformers and associated circuits)	-	2000	-
17(Endurance)	-	4000	-
18(Abnormal operation)	-	3000	-
19(Mechanical hazards)	-	2000	-
20(Mechanical strength)	-	4000	-
21(Construction)	-	3000	-
22(Internal wiring)	-	2000	-
23(Components)	-	2000	-
24(Supply connection and external flexible cords)	-	2000	-
25(Terminals for external conductors)	-	1000	-
26(Provision for earthing)	-	2000	-
27(Screws and connections)	-	1000	-
28(Creepage distances, clearances and distances through insulation)	-	1000	-
29(Resistance to heat, fire and tracking)	-	3000	-
30(Resistance to rusting)	-	2000	-
31(Radiation, toxicity and similar hazards)	-	0	-

20 Feb, 2029

-
-

IS 3315 (2024)

Direct Evaporative Air Cooler â Specification (Fourth Revision)

47000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Enclosure)	-	5000	Testing Charges included in Cl 5.1
Cl-5.2(Filter Pads)	-	0	Testing Charges included in Cl 5.1
Cl-5.3(Sump Tank Capacities)	-	0	Testing Charges included in Cl 5.1
Cl-5.4(Blower/Fan)	-	0	Testing Charges included in Cl 5.1
Cl-5.4.3(Fan motor)	-	0	Testing Charges included in Cl 5.1
Cl-5.5(Pump Set)	-	0	Testing Charges included in Cl 5.1
Cl-5.6.1(Electrical wiring and connection)	-	0	Testing Charges included in Cl 5.1
Cl-5.6.2(Suitable power cable)	-	0	Testing Charges included in Cl 5.1
Cl-5.7(Switches)	-	0	Testing Charges included in Cl 5.1
Cl-6(Rating Requirement)	-	1000	-
Cl-8.1(Performance Requirement)	-	5000	-
Cl-8.2(Sound Test)	-	3000	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	4000	-
Cl-8.4(Cooling Efficiency Test)	-	3000	-
Cl-8.5(Power Consumption)	-	4000	-
Cl-8.6(EER Calculation Method)	-	3000	-
Cl-8.7(Drop Test)	-	2000	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	3000	-
Cl-12.2.1(General Running Tests)	-	4000	-
Cl-12.2.2(Protection against Electric Shock)	-	1000	-
Cl-12.2.3(High Voltage Tests)	-	2000	-
Cl-12.2.4(Leakage Current)	-	2000	-
Cl-12.2.5(Provision for Earthing)	-	2000	-
Cl-12.2.6(Finish)	-	0	-
Cl-13(Additional Requirement for ECO-Mark)	-	2000	-
Cl-14(Storage)	-	1000	-

20 Feb, 2029

-
-

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

48500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	1000	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
7.101(Marking)	-	0	-
8( Protection Against Electric Shock, IS 302-1)	-	2000	-
10(Power Input and Current, IS 302-1)	-	2000	-
11(Heating, IS 302-1)	-	4000	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
14(Transient Over Voltages, IS 302-1)	-	2000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	2000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	0	-
19.7(Abnormal Operation, IS 302-1)	-	4000	-
19.8(Abnormal Operation, IS 302-1)	-	0	-
19.9(Abnormal Operation, IS 302-1)	-	0	-
19.1(Abnormal Operation, IS 302-1)	-	0	-
19.101(Abnormal Operation)	-	0	-
19.102(Abnormal Operation)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	3000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	-
20.101(Stability & Mechanical Hazards)	-	0	-
20.103(Stability & Mechanical Hazards)	-	0	-
20.104(Stability & Mechanical Hazards)	-	0	-
20.105(Stability & Mechanical Hazards)	-	0	-
20.106(Stability & Mechanical Hazards)	-	0	-
20.107(Stability & Mechanical Hazards)	-	0	-
20.108(Stability & Mechanical Hazards)	-	0	-
20.109(Stability & Mechanical Hazards)	-	0	-
20.110(Stability & Mechanical Hazards)	-	0	-
20.111(Stability & Mechanical Hazards)	-	0	-
20.112(Stability & Mechanical Hazards)	-	0	-
20.113(Stability & Mechanical Hazards)	-	0	-
20.114(Stability & Mechanical Hazards)	-	0	-
20.115(Stability & Mechanical Hazards)	-	0	-
20.116(Stability & Mechanical Hazards)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	2000	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
22(Construction, IS 302-1)	-	3000	-
22.101(Construction)	-	0	-
22.102(Construction)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	2000	-
23.2(Internal Wiring, IS 302-1)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
23.4(Internal Wiring, IS 302-1)	-	0	-
23.5(Internal Wiring, IS 302-1)	-	0	-
23.6(Internal Wiring, IS 302-1)	-	0	-
23.7(Internal Wiring, IS 302-1)	-	0	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.10(Internal Wiring, IS 302-1)	-	0	-
24.1(Components, IS 302-1)	-	2000	-
24.2(Components, IS 302-1)	-	0	-
24.5(Components, IS 302-1)	-	0	-
24.6(Components, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26(Terminals for External Conductors, IS 302-1)	-	0	-
27(Provision for Earthing, IS 302-1)	-	2000	-
27.2(Provision for Earthing, IS 302-1)	-	0	-
27.3(Provision for Earthing, IS 302-1)	-	0	-
27.4(Provision for Earthing, IS 302-1)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	2000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
27(Provision for Earthing)	-	0	-
29(Clearances, Creepage distances and Solid Insulation)	-	0	-
20.102(Stability & Mechanical Hazards)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	0	-

20 Feb, 2029

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

47000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32.0(Radiation, Toxicity and Similar Hazards)	-	0	-
31.0(Resistance To Rusting)	-	2000	-
30.0(Resistance To Heat and Fire)	-	3000	-
29.0(Creepage Distances and Clearances)	-	2000	-
28.0(Screws and Connections)	-	1000	-
27.0(Provision For Earthing)	-	2000	-
26.0(Terminals for external conductors)	-	1000	-
25.0(Supply Connection and External Flexible Cords)	-	2000	-
24.0(Components)	-	3000	-
23.0(Internal Wiring)	-	1000	-
22.0(Construction)	-	3000	-
21.0(Mechanical Strength)	-	2000	-
20.0(Stability and mechanical hazards)	-	2000	-
19.0(Abnormal Operation)	-	3000	-
17.0(Overload Protection of transformer and associated circuit)	-	2000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	3000	-
15.0(Moisture resistance)	-	2000	-
14.0(Transient Overvoltage)	-	2000	-
13.0(Leakage Current and electric strength at operating temperature)	-	3000	-
11.0(Heating)	-	3000	-
10.0(Input and Current)	-	2000	-
8.0(Protection against access to live parts)	-	1000	-
7.0(Classification)	-	1000	-
6.0(Marking and Instructions)	-	1000	-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-

20 Feb, 2029

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC)

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	0	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3,a(Marking )	-	500	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	500	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	1000	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	5000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	2000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	5000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	0	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	1000	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	2000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	2000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	0	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	0	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.1(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	0	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	0	-
13(Silent Operation)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	0	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	0	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	0	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	0	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	0	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	0	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.1(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	0	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	0	-
13(Silent Operation)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
15.1, 15.2(Air delivery and service value)	-	0	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	0	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	0	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	0	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	0	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	0	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	0	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	0	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	0	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	0	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	0	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	0	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	0	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	0	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	0	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	0	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	0	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	0	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	0	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	0	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	0	0
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	0	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	0	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	0	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	0	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	0	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	0	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	0	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	0	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-

20 Feb, 2029

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC)

IS 4665 : Part 1 (2023)

Hand-Held Motor-Operated Electric Tools Safety Part 1: General requirements Second Revision

51000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirements)	-	0	-
5(General conditions for the tests)	-	0	-
6(Void)	-	0	-
7(Classification)	-	1000	-
8(Marking and instructions)	-	2000	-
9(Protection against access to live parts)	-	2000	-
10(Starting)	-	2000	-
11(Input and current)	-	2000	-
12(Heating)	-	3000	-
13(Leakage current)	-	2000	-
14(Moisture resistance)	-	3000	-
15(Electric strength)	-	2000	-
16(Overload protection of transformers and associated circuits)	-	2000	-
17(Endurance)	-	5000	-
18(Abnormal operation)	-	4000	-
19(Mechanical hazards)	-	2000	-
20(Mechanical strength)	-	2000	-
21(Construction)	-	2000	-
22(Internal wiring)	-	1000	-
23(Components)	-	2000	-
24(Supply connection and external flexible cords)	-	2000	-
25(Terminals for external conductors)	-	1000	-
26(Provision for earthing)	-	2000	-
27(Screws and connections)	-	1000	-
28(Creepage distances, clearances and distances)	-	2000	-
29(Resistance to heat, fire and tracking)	-	3000	-
30(Resistance to rusting)	-	1000	-
31(Radiation, toxicity and similar hazards)	-	0	-

20 Feb, 2029

-
-

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

27000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	1000	-
Cl-5(General Conditions for the tests)	-	1000	-
Cl-6(Classification)	-	2000	-
Cl-7(Marking)	-	2000	-
Cl-8(Safety Requirements)	-	20000	-
Cl-9(Endurance fpr motor and base assembly)	-	5000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	2000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	2000	-
Cl-10.4(Idli Batter)	-	2000	-
Cl-10.5(Operational Tests for Juicers)	-	1000	-
Cl-11(Temperature Withstand Test for Bowl)	-	1000	-
Cl-12.1(Test for Switches)	-	2000	-
Cl-13(Strength of Assembly)	-	2000	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	0	Testing Charges included in Cl 8
Cl-14.2, Table-2 (ii)(Power input and current)	-	0	Testing Charges included in Cl 8
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	0	Testing Charges included in Cl 8
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	0	Testing Charges included in Cl 8
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	0	Testing Charges included in Cl 8
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	0	Testing Charges included in Cl 8

20 Feb, 2029

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC)

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

61000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	3000	-
6(Classification- IS 302-1)	-	1000	-
5(General conditions for the tests)	-	0	-
11.8(Temperature rise)	-	4000	-
11.7(Duration corresponding)	-	0	-
11.6(Combined appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.4(Heating appliances)	-	0	-
8.1.5(Live parts of built-in appliances)	-	2000	-
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	3000	-
16(Leakage current and electric strength)	-	3000	-
4(General requirement)	-	0	-
32.1(Radiation Toxicity and Similar Hazards)	-	3000	-
31(Resistance to Rusting)	-	2000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	2000	-
28(Screw test and connections)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	2000	-
26(Terminals for external conductors)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
24(Components)	-	3000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
22.1(Construction, IS 302-1)	-	4000	-
21.1(Mechanical Strength, IS 302-1)	-	2000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
19(Abnormal Operation)	-	4000	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.1(General)	-	0	-
16.0(General)	-	0	-
15.3(Humidity Test)	-	1500	-
15.2(Spillage Test)	-	1500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	2000	-
15.0(Moisture resistance)	-	0	-
14(Transient Over Voltages)	-	2000	-
13.3(Electric Strength at operating temperature)	-	1500	-
13.2(Leakage current at operating temperature)	-	1500	-
13(Leakage current and electric strength at operating temperature)	-	0	-
11.3(Heating)	-	0	-
11.2(General)	-	0	-
11.1(General)	-	0	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
7(Marking and instructions)	-	1000	-
A.2(Earth continuity test)	-	0	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
15.2(Moisture resistance)	-	0	-
19.17(Abnormal Operation, IS 302-1)	-	0	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
21.3(Mechanical Strength, IS 302-1)	-	0	-
22.5(Construction)	-	0	-
22.6(Construction, IS 302-1)	-	0	-
22.11(Construction, IS 302-1)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction, IS 302-1)	-	0	-
22.42(Construction)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.5(Terminals for external conductors)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28.1(Screws and connections)	-	0	-
22.2(Construction, IS 302-1)	-	0	-
22.3(Construction, IS 302-1)	-	0	-
B.22.4(Construction, IS 302-1)	-	0	-
B.22.5(Construction, IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
7.9(Marking- IS 302-1)	-	0	-
7.1O(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-2-15)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
11(Heating, IS 302-1, Table -3)	-	0	-
11(Heating, IS 302-1, Table -3)	-	0	-
11(Heating, IS 302-1, Table -3)	-	0	-
11(Heating, IS 302-1, Table -3)	-	0	-
11(Heating, IS 302-1, Table -3)	-	0	-
11(Heating, IS 302-1, Table -3)	-	0	-
11(Heating, IS 302-1)	-	0	-
19.7(Abnormal Operation, IS 302-1)	-	0	-
19.8(Abnormal Operation, IS 302-1)	-	0	-
19.9(Abnormal Operation, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.17(Abnormal Operation, IS 302-1)	-	0	-
22.7(Construction, IS 302-1)	-	0	-
22.9(Construction, IS 302-1)	-	0	-
22.10(Construction, IS 302-1)	-	0	-
22.12(Construction, IS 302-1)	-	0	-
22.14(Construction, IS 302-1)	-	0	-
22.15(Construction, IS 302-1)	-	0	-
22.18(Construction, IS 302-1)	-	0	-
22.19(Construction, IS 302-1)	-	0	-
22.21(Construction, IS 302-1)	-	0	-
22.22(Construction, IS 302-1)	-	0	-
22.24(Construction, IS 302-1)	-	0	-
22.25(Construction, IS 302-1)	-	0	-
22.28(Construction, IS 302-1)	-	0	-
22.31(Construction, IS 302-1)	-	0	-
22.34(Construction, IS 302-1)	-	0	-
22.35(Construction, IS 302-1)	-	0	-
22.36(Construction, IS 302-1)	-	0	-
22.37(Construction, IS 302-1)	-	0	-
22.38(Construction, IS 302-1)	-	0	-
22.40(Construction, IS 302-1)	-	0	-
22.41(Construction, IS 302-1)	-	0	-
22.43(Construction, IS 302-1)	-	0	-
22.43(Construction, IS 302-1)	-	0	-
22.44(Construction, IS 302-1)	-	0	-
22.49(Construction, IS 302-1)	-	0	-
22.54(Construction, IS 302-1)	-	0	-
22.55(Construction, IS 302-1)	-	0	-
22.58(Construction, IS 302-1)	-	0	-
22.59(Construction, IS 302-1)	-	0	-
22.60(Construction, IS 302-1)	-	0	-
22.61(Construction, IS 302-1)	-	0	-
23.2(Internal Wiring, IS 302-1)	-	0	-
23.4(Internal Wiring, IS 302-1)	-	0	-
23.6(Internal Wiring, IS 302-1)	-	0	-
23.7(Internal Wiring, IS 302-1)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	0	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.10(Internal Wiring, IS 302-1)	-	0	-
25.1(Supply connection and external flexible cords, IS 302-1)	-	0	-
25.2(Supply connection and external flexible cords, IS 302-1)	-	0	-
25.3(Supply connection and external flexible cords, IS 302-1)	-	0	-
25.4(Supply connection and external flexible cords, IS 302-1)	-	0	-
25.5(Supply connection and external flexible cords, IS 302-1)	-	0	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.10(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.20(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.23(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.24(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
27.2(Provision for Earthing, IS 302-1)	-	0	-
27.3(Provision for Earthing, IS 302-1)	-	0	-
27.4(Provision for Earthing, IS 302-1)	-	0	-
27.6(Provision for Earthing, IS 302-1)	-	0	-
32.1(Radiation, toxicity and similar hazards, is 302-1)	-	0	-
32.2(Radiation, toxicity and similar hazards, is 302-1)	-	0	-

20 Feb, 2029

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC), 22.16 (Construction), 22.32 (Construction, IS 302-1)

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
8(Protection against accidental contact with live parts)	-	2000	-
9(Terminals)	-	2000	-
10(PROVISION FOR EARTHING)	-	2000	-
11(MOISTURE RESISTANCE)	-	5000	-
12(Electric Strength)	-	2000	-
13(Thermal endurance test for winding of ballasts)	-	0	-
14(Fault conditions)	-	2000	-
15(Transformer heating)	-	5000	-
16(Construction)	-	1000	-
17(Creepage distance and clearances)	-	1000	-
18(Screws, current carrying parts and connections)	-	1000	-
19(Resistance to heat, fire and tracking)	-	5000	-
20(Resistance to corrosion)	-	1000	-
16(Enclosures)	-	0	-
16(Bridging resistor in primary circuit)	-	0	-
16(Capacitor and RC units)	-	0	-
16(RF suppression (X-Y capacitors))	-	0	-
16(Inductor)	-	0	-
16(MOV/VDR)	-	0	-
16(SMPS/Mains Transformer)	-	0	-
16(PCB material)	-	0	-
19(Metal base PCB for LED)	-	0	-
19(Transparent cover)	-	0	-
19(Bobbin)	-	0	-
16(Insulated tape)	-	0	-
16(Heat shrinkage sleeve)	-	0	-
19(Terminals)	-	0	-
16(Connector)	-	0	-
16(Fuse)	-	0	-
16(Internal wire)	-	0	-
16(LED)	-	0	-
16(Opto-coupler)	-	0	-
16(EMI/EMC filter)	-	0	-
16(Winding wire)	-	0	-
16(Thin sheet materials)	-	0	-
7(Marking)	-	0	-
8("PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS")	-	0	-
9(TERMINALS)	-	0	-
10(PROVISIONS FOR PROTECTIVE EARTHING)	-	0	-
11(MOISTURE RESISTANCE AND INSULATION)	-	0	-
12(ELECTRIC STRENGTH)	-	0	-
14(FAULT CONDITIONS)	-	0	-
15(TRANSFORMER HEATING)	-	0	-
16(CONSTRUCTION)	-	0	-
17(CREEPAGE DISTANCES AND CLEARANCES)	-	0	-
18("SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS")	-	0	-
19(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	0	-
20(RESISTANCE TO CORROSION)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
6(CLASSIFICATION)	-	0	-
16(Opto-coupler)	-	0	-

20 Feb, 2029

-
Exclusion: 16 (Enclosures), 16 (Bridging resistor in primary circuit), 16 (Capacitor and RC units), 16 (RF suppression (X-Y capacitors)), 16 (Inductor), 16 (MOV/VDR), 16 (SMPS/Mains Transformer), 16 (PCB material), 19 (Metal base PCB for LED), 19 (Transparent cover), 19 (Bobbin), 16 (Insulated tape), 16 (Heat shrinkage sleeve), 19 (Terminals), 16 (Connector), 16 (Fuse), 16 (Internal wire), 16 (LED), 16 (Opto-coupler), 16 (EMI/EMC filter), 16 (Winding wire), 16 (Thin sheet materials)

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	500	-
6.0(Marking)	-	2000	-
7.0(Construction)	-	4000	-
8.0(Creepage Distance and Clearances)	-	2000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	1000	-
11.0(External & Internal Wiring)	-	1000	-
12.0(Protection against electric shock)	-	1500	-
13.0(Endurance Tests and Thermal Tests)	-	5000	-
14.0(Resistance to Dust & Moisture)	-	2000	-
15.0(Insulation Resistance and Electric Strength)	-	2000	-
16.0(Resistance to Heat , fire and tracking)	-	2000	-

20 Feb, 2029

-
Exclusion: 17.0 (Photometric Test), (Cl.4.24) (Annex-P) (UV Radiations for metal halide lamps), 4.26.2 (Short Circuit Protection)

Bureau of Indian Standards

The National Standards Body of India

TEKNOLAB QUALITY SERVICES PRIVATE LIMITED

PLOT RE 25A, SECTOR 69, IMT FARIDABAD, Ballabgarh, Faridabad, Haryana, 121004

9211870099 info@teknolab.in

Scope List