BIS - LIMS (Laboratory Information Management System)

Electrical Research and Development Association, gujurat

ERDA Road, GIDC, Makarpura, Vadodara, VADODARA, Vadodara, Gujarat, 390010

9987940924 nirav.taunk@erda.org

Scope List

Reset

165 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 16221 : Part 1 (2016)

Safety of Power Converters for use in Photovoltaic Power Systems Part 1 General Requirements

Upto 250 kVA

979000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15(Software and firmware performing safety functions)	-	10000	0.1 to 20 kW: 10000 20.1 to 50 kW: 10000 50.1 to 125 kW: 10000 125.1 to 250 kW: 10000
14(Components)	-	60000	0.1 to 20 kW: 15000 20.1 to 50 kW: 25000 50.1 to 125 kW: 40000 125.1 to 250 kW: 60000
13(Physical requirements)	-	60000	0.1 to 20 kW: 25000 20.1 to 50 kW: 30000 50.1 to 125 kW: 50000 125.1 to 250 kW: 60000
12(Chemical hazards)	-	27000	0.1 to 20 kW: 15000 20.1 to 50 kW: 15000 50.1 to 125 kW: 20000 125.1 to 250 kW: 27000
11(Protection against liquid hazards)	-	27000	0.1 to 20 kW: 15000 20.1 to 50 kW: 15000 50.1 to 125 kW: 20000 125.1 to 250 kW: 27000
10(Protection against Sonic Pressure hazards)	-	60000	0.1 to 20 kW: 15000 20.1 to 50 kW: 20000 50.1 to 125 kW: 40000 125.1 to 250 kW: 60000
9(Protection Against Fire Hazards)	-	140000	0.1 to 20 kW: 20000 20.1 to 50 kW: 30000 50.1 to 125 kW: 70000 125.1 to 250 kW: 140000
8(Protection Against mechanical Hazards)	-	140000	0.1 to 20 kW: 20000 20.1 to 50 kW: 30000 50.1 to 125 kW: 70000 125.1 to 250 kW: 140000
7(Protection against electric shock and energy hazards)	-	140000	0.1 to 20 kW: 25000 20.1 to 50 kW: 30000 50.1 to 125 kW: 70000 125.1 to 250 kW: 140000
6(Environmental Requirements and conditions)	-	150000	0.1 to 20 kW: 25000 20.1 to 50 kW: 40000 50.1 to 125 kW: 75000 125.1 to 250 kW: 150000
5(Marking and documentation)	-	5000	0.1 to 20 kW: 5000 20.1 to 50 kW: 5000 50.1 to 125 kW: 5000 125.1 to 250 kW: 5000
4(General testing requirements)	-	160000	0.1 to 20 kW: 30000 20.1 to 50 kW: 50000 50.1 to 125 kW: 85000 125.1 to 250 kW: 160000
14(Components)	-	60000	-
6.4(UV exposure)	-	150000	-
13.6.4(UV Resistance)	-	60000	-
Annex J(Ultraviolet light conditioning test)	-	0	-
9.1.4.3(Hot flaming oil test)	-	0	-
4.2(Thermal testing)	-	160000	-
4.4(Testing in single fault condition)	-	160000	-
4.5(Humidity preconditioning)	-	160000	-
4.6(Backfeed voltage protection)	-	160000	-
4.7(Electrical rating tests)	-	160000	-
4.8(Additional tests for grid interactive inverters)	-	160000	-
Annex A(Measurement of clearances and creepage distances)	-	0	-
Annex B(Programmable equipment)	-	0	-
Annex C(Symbols to be used in equipment markings)	-	0	-
Annex D(Test probes for determining access)	-	0	-
Annex E(RCDs)	-	0	-
Annex F(Altitude correction for clearances)	-	0	-
Annex G(Clearance and creepage distance determination for frequencies greater than 30 kHz)	-	0	-
Annex H("Measuring instrument for touch current measurements ")	-	0	-
Annex I("Examples of protection, insulation, and overvoltage category requirements for PCE ")	-	0	-
4.3, 4.3.2, 4.3.2.2, 4.3.2.3(Thermal Tests (Maximum temperatures, Touch temperature, temperature limits for mount surfaces))	-	160000	-
4.4.3.1(Protection against shock hazard)	-	160000	-
4.4.3.2(Protection against spread of fire)	-	160000	-
4.4.3.4(Protection Against parts expulsion hazards)	-	160000	-
4.4.4.1(Component fault tests)	-	160000	-
4.4.4.2(Equipment’s or parts for short-term or intermittent operation)	-	160000	-
4.4.4.3(Motors(Lock rotor))	-	160000	-
4.4.4.4(Transformer short circuit tests)	-	160000	-
4.4.4.5(Output short circuit)	-	160000	-
4.4.4.6(Backfeed current test for equipment with more than one source of supply)	-	160000	-
4.4.4.7(Output overload)	-	160000	-
4.4.4.8(Cooling system failure)	-	160000	-
4.4.4.9(Heating devices)	-	160000	-
4.4.4.10(Safety interlock systems)	-	160000	-
4.4.4.11(Reverse d.c. connections)	-	160000	-
4.4.4.12(Voltage selector mismatch)	-	160000	-
4.4.4.13(Mis-wiring with incorrect phase sequence or polarity)	-	160000	-
4.4.4.14(Printed wiring board short-circuit test)	-	160000	-
4.6.1(Backfeed tests under normal conditions)	-	160000	-
4.6.2(Backfeed tests under single-fault conditions)	-	160000	-
5.1.2(Durability of markings)	-	5000	-
5.2.1(Visibility and legibility requirements for warning markings)	-	5000	-
6.3(Ingress protection)	-	150000	-
7.3.2.3(Short-term limits of accessible voltages under fault conditions)	-	140000	-
7.3.2.6(Working voltage and DVC)	-	140000	-
7.3.4,7.3.4.2(protection against direct contact)	-	140000	-
7.3.4.3(Protection by means of insulation of live parts)	-	140000	-
7.3.5,7.3.5.2(Protection in case of direct contact)	-	140000	-
7.3.5.3.1(Limitation of current through protective impedance)	-	140000	-
7.3.5.3.2(Limitation of discharging energy through protective impedance)	-	140000	-
7.3.5.4(Protection by means of limited voltages)	-	140000	-
7.3.6.1,7.3.6.2(Protection against indirect contact(Creapage & clearance))	-	140000	-
7.3.6.3(Protective class I - Protective bonding and earthing)	-	140000	-
7.3.6.3.3(Rating of protective bonding)	-	140000	-
7.3.7.8.4.2(Use of coating materials (on PWBs))	-	140000	-
7.3.7.4(Clearance distances)	-	140000	-
7.3.7.5(Creepage distances)	-	140000	-
7.3.8(Residual current detection (RCD) or Monitoring (RCM) device compatibilty (DC components on AC side))	-	140000	-
7.3.9(Protection against shock hazard due to stored energy)	-	140000	-
7.4(Protection against energy hazards)	-	140000	-
7.5.1(Impulse voltage test (type test))	-	140000	-
7.5.2(Voltage test (dielectric strength test))	-	140000	-
7.5.2.3(Humidity preconditioning)	-	140000	-
7.5.3(Partial discharge test (type test or sample test))	-	140000	-
7.5.4(Touch current measurement)	-	140000	-
7.3.7.5(Creepage distances)	-	140000	-
7.3.8(Residual current detection (RCD) or Monitoring (RCM) device compatibilty (DC components on AC side))	-	140000	-
7.3.9(Protection against shock hazard due to stored energy)	-	140000	-
7.4(Protection against energy hazards)	-	140000	-
7.5.1(Impulse voltage test (type test))	-	140000	-
7.5.2(Voltage test (dielectric strength test))	-	140000	-
7.5.2.3(Humidity preconditioning)	-	140000	-
7.5.3(Partial discharge test (type test or sample test))	-	140000	-
7.5.4(Touch current measurement)	-	140000	-
8.2(Moving parts)	-	140000	-
8.3(Stability)	-	140000	-
8.4(Provisions for lifting and carrying)	-	140000	-
8.5(Wall mounting)	-	140000	-
8.6(Expelled parts)	-	140000	-
9.1.1(Reducing the risk of ignition and spread of flame)	-	140000	-
9.1.2(Conditions for a fire enclosure)	-	140000	-
9.1.3(Material requirements for protection against fire hazard)	-	140000	-
9.1.4(Openings in fire enclosures)	-	140000	-
9.1.4.6(Additional requirements for openings in transportable equipment)	-	140000	-
9.2.2(Limited power source tests)	-	140000	-
9.3(Short-circuit and overcurrent protection)	-	140000	-
10.2(Sonic pressure and sound level)	-	60000	-
11.1(Liquid containment, pressure and leakage)	-	27000	-
11.2(Fluid pressure and leakage)	-	27000	-
13.1(Handles and manual controls)	-	60000	-
13.1.1(Adjustable controls)	-	60000	-
13.2(Securing of parts)	-	60000	-
13.3(Provisions for external connections)	-	60000	-
13.4(Internal wiring and connections)	-	60000	-
13.5(Openings in enclosures)	-	60000	-
13.3.2.5(Cord anchorages and strain relief)	-	60000	-
13.3.5(Wire bending space for wires 10mm2 and greater)	-	60000	-
13.5(Openings in enclosures)	-	60000	-
13.6.2.1(Stress relief test)	-	60000	-
13.7(Mechanical resistance to deflection, impact, or drop)	-	60000	-
13.8(Thickness requirements for metal enclosures)	-	60000	-
14.2(Motor over-temperature protection)	-	60000	-
14.3(Over-temperature protection devices)	-	60000	-
14.6(Printed circuit boards)	-	60000	-
14.7(Circuits or components used as transient overvoltage limiting devices)	-	60000	-
11.3(Oil and grease)	-	27000	-
Cl.13.6.1.1(Thermal index or capability)	-	60000	-
Cl.13.6.3.1(Resistance to arcing)	-	60000	-
Cl.14.8(Batteries)	-	60000	-

30 Nov, 2028

-
-

IS/IEC 61439 : Part 2 (2020)

Low-voltage switchgear and controlgear assemblies Part 2: Power switchgear and controlgear assemblies (First Revision)

5141392 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-10(Design verification)	-	4868649	-
Cl-10.2.6(Verification of protection against mechanical impact (IK code))	-	13156	-
Cl-10.2.8(Design verification- Mechanical operation)	-	6500	6500 per circuit
Cl-10.3(Degree of protection of PSC-assemblies (IP Code))	-	69891	-
Cl-10.9.3.2(Impulse withstand voltage test)	-	16034	-
Cl-10.10(Temperature-rise)	-	167162	60500 for 800A to 1500A, 66005 for 1501A to 3000A, 86198 for 3001A to 4000A, 116059 for 4001A to 5000A, 138532 for 5001 to 6000A, 167162 for 6001 A to 7000A test current,

30 Nov, 2028

-
-

IS 16169 (2019)

Utility - Interconnected photovoltaic inverters - Test procedure of islanding prevention measures (First Revision)

Upto 250 kVA

305000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Test for single or multi-phase inverter)	-	305000	0.1 to 20 kW= 1,00,000/- 20.1 to 50 kW= 1,50,000/- 50.1 to 125 kW= 2,10,000/- 125.1 to 250 kW= 3,05,000/-
Annex A(Islanding as it applies to PV systems)	-	305000	0.1 to 20 kW= 1,00,000/- 20.1 to 50 kW= 1,50,000/- 50.1 to 125 kW= 2,10,000/- 125.1 to 250 kW= 3,05,000/-
Annex B(Test for independent islanding device)	-	305000	0.1 to 20 kW= 1,00,000/- 20.1 to 50 kW= 1,50,000/- 50.1 to 125 kW= 2,10,000/- 125.1 to 250 kW= 3,05,000/-
6 to 6.2(Test for single or multi-phase inverter to Pass/fail criteria)	-	305000	0.1 to 20 kW= 1,00,000/- 20.1 to 50 kW= 1,50,000/- 50.1 to 125 kW= 2,10,000/- 125.1 to 250 kW= 3,05,000/-
7(Documentation)	-	305000	0.1 to 20 kW= 1,00,000/- 20.1 to 50 kW= 1,50,000/- 50.1 to 125 kW= 2,10,000/- 125.1 to 250 kW= 3,05,000/-
4(Testing circuit)	-	305000	0.1 to 20 kW= 1,00,000/- 20.1 to 50 kW= 1,50,000/- 50.1 to 125 kW= 2,10,000/- 125.1 to 250 kW= 3,05,000/-
5(Testing equipment)	-	305000	0.1 to 20 kW= 1,00,000/- 20.1 to 50 kW= 1,50,000/- 50.1 to 125 kW= 2,10,000/- 125.1 to 250 kW= 3,05,000/-
Annex C(Gate blocking signal)	-	305000	0.1 to 20 kW= 1,00,000/- 20.1 to 50 kW= 1,50,000/- 50.1 to 125 kW= 2,10,000/- 125.1 to 250 kW= 3,05,000/-

30 Nov, 2028

-
-

IS/IEC 61727 (2004)

Photovoltaic PV Systems ” Characteristics of the Utility Interface

Upto 250 kVA

618000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Utility compatibility)	-	130000	0.1 kW to 20 kW=65000/- 20.1 kW to 50 kW= 78800/- 50.1 kW to 125 kW= 102100/- 125.1 kW to 250 kW= 130000/-
5(Personnel safety and equipment protection)	-	488000	0.1 kW to 20 kW=175000/- 20.1 kW to 50 kW=248400/- 50.1 kW to 125 kW= 342300/- 125.1 kW to 250 kW= 488000/-
4(Utility compatibility)	-	-	-
5(Personnel safety and equipment protection)	-	-	-

30 Nov, 2028

-
-

IS 17980 (2022)

Maximum Power Point Tracking Efficiency of Grid Connected Photovoltaic Inverters (First Revision)

Upto 250 kVA

198000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1 (a)(Static MPPT efficiency)	-	198000	0.1 to 20 kW: 70,000/- 20.1 to 50 kW : 94,000/- 50.1 to 125 kW: 1,28,000/- 125.1 to 250 kW: 1,98,000/-
Cl-4.1 (b)(Dynamic MPPT efficiency)	-	198000	0.1 to 20 kW: 70,000/- 20.1 to 50 kW : 94,000/- 50.1 to 125 kW: 1,28,000/- 125.1 to 250 kW: 1,98,000/-
Cl-4.1 (a)(Static MPPT efficiency)	-	198000	0.1 to 20 kW: 70,000/- 20.1 to 50 kW : 94,000/- 50.1 to 125 kW: 1,28,000/- 125.1 to 250 kW: 1,98,000/-
Cl-4.1 (b)(Dynamic MPPT efficiency)	-	198000	0.1 to 20 kW: 70,000/- 20.1 to 50 kW : 94,000/- 50.1 to 125 kW: 1,28,000/- 125.1 to 250 kW: 1,98,000/-

30 Nov, 2028

-
-

IS/IEC 61683 (1999)

Photovoltaic systems - Power conditioners - Procedure for measuring efficiency

250 kVA Grid connected and Stand alone

144000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Efficiency calculations)	-	144000	(Conversion Efficiency & No load & stand by loss) 0.1 to 20 kW: 70,000/- 20.1 to 50 kW: 80, 000/- 50.1 to 125 kW: 1,04,000/- 125.1 to 250 kW: 1,44, 000/-
6(Efficiency test circuits)	-	144000	(Conversion Efficiency & No load & stand by loss) 0.1 to 20 kW: 70,000/- 20.1 to 50 kW: 80, 000/- 50.1 to 125 kW: 1,04,000/- 125.1 to 250 kW: 1,44, 000/-
7(Loss measurement)	-	144000	(Conversion Efficiency & No load & stand by loss) 0.1 to 20 kW: 70,000/- 20.1 to 50 kW: 80, 000/- 50.1 to 125 kW: 1,04,000/- 125.1 to 250 kW: 1,44, 000/-
Annex A(Power conditioner description)	-	144000	(Conversion Efficiency & No load & stand by loss) 0.1 to 20 kW: 70,000/- 20.1 to 50 kW: 80, 000/- 50.1 to 125 kW: 1,04,000/- 125.1 to 250 kW: 1,44, 000/-
Annex B(Power efficiency and conversion factor)	-	144000	(Conversion Efficiency & No load & stand by loss) 0.1 to 20 kW: 70,000/- 20.1 to 50 kW: 80, 000/- 50.1 to 125 kW: 1,04,000/- 125.1 to 250 kW: 1,44, 000/-
Annex C(Weighted average energy efficiency)	-	144000	(Conversion Efficiency & No load & stand by loss) 0.1 to 20 kW: 70,000/- 20.1 to 50 kW: 80, 000/- 50.1 to 125 kW: 1,04,000/- 125.1 to 250 kW: 1,44, 000/-
Annex D(Derivation of efficiency tolerance in Table 2)	-	144000	(Conversion Efficiency & No load & stand by loss) 0.1 to 20 kW: 70,000/- 20.1 to 50 kW: 80, 000/- 50.1 to 125 kW: 1,04,000/- 125.1 to 250 kW: 1,44, 000/-
4(Efficiency measurement conditions)	-	144000	(Conversion Efficiency & No load & stand by loss) 0.1 to 20 kW: 70,000/- 20.1 to 50 kW: 80, 000/- 50.1 to 125 kW: 1,04,000/- 125.1 to 250 kW: 1,44, 000/-
4.1(DC power source for testing)	-	144000	(Conversion Efficiency & No load & stand by loss) 0.1 to 20 kW: 70,000/- 20.1 to 50 kW: 80, 000/- 50.1 to 125 kW: 1,04,000/- 125.1 to 250 kW: 1,44, 000/-
4.2(Temperature)	-	144000	(Conversion Efficiency & No load & stand by loss) 0.1 to 20 kW: 70,000/- 20.1 to 50 kW: 80, 000/- 50.1 to 125 kW: 1,04,000/- 125.1 to 250 kW: 1,44, 000/-
4.3(Output voltage and frequency)	-	144000	(Conversion Efficiency & No load & stand by loss) 0.1 to 20 kW: 70,000/- 20.1 to 50 kW: 80, 000/- 50.1 to 125 kW: 1,04,000/- 125.1 to 250 kW: 1,44, 000/-
4.4(Input voltage)	-	144000	(Conversion Efficiency & No load & stand by loss) 0.1 to 20 kW: 70,000/- 20.1 to 50 kW: 80, 000/- 50.1 to 125 kW: 1,04,000/- 125.1 to 250 kW: 1,44, 000/-
4.5(Ripple and distortion)	-	144000	(Conversion Efficiency & No load & stand by loss) 0.1 to 20 kW: 70,000/- 20.1 to 50 kW: 80, 000/- 50.1 to 125 kW: 1,04,000/- 125.1 to 250 kW: 1,44, 000/-
4.6(Resistive loads/utility grid)	-	144000	(Conversion Efficiency & No load & stand by loss) 0.1 to 20 kW: 70,000/- 20.1 to 50 kW: 80, 000/- 50.1 to 125 kW: 1,04,000/- 125.1 to 250 kW: 1,44, 000/-
4.7(Reactive loads)	-	144000	(Conversion Efficiency & No load & stand by loss) 0.1 to 20 kW: 70,000/- 20.1 to 50 kW: 80, 000/- 50.1 to 125 kW: 1,04,000/- 125.1 to 250 kW: 1,44, 000/-
4.8(Resistive plus non-linear loads)	-	144000	(Conversion Efficiency & No load & stand by loss) 0.1 to 20 kW: 70,000/- 20.1 to 50 kW: 80, 000/- 50.1 to 125 kW: 1,04,000/- 125.1 to 250 kW: 1,44, 000/-
4.9(Complex loads)	-	144000	(Conversion Efficiency & No load & stand by loss) 0.1 to 20 kW: 70,000/- 20.1 to 50 kW: 80, 000/- 50.1 to 125 kW: 1,04,000/- 125.1 to 250 kW: 1,44, 000/-

30 Nov, 2028

-
-

IS/IEC 61439 : Part 1 (2011)

Low-Voltage Switchgear and Controlgear Assemblies Part 1 General Rules

5105702 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.2(Strength of materials and parts)	-	159557	74635 for Severity A, Rs. 88275 for Severity B, 30961 for thermal stablility, Rs. 6274 for resistance to abnormal heat and fire (per sample), Rs. 15572 for lifting test, Rs. 13156 for mechanical impact, Rs. 949 for marking, 4370 for UV test per day
10.4(Clearances and creepage distances)	-	905	-
10.5(Protection against electric shock and integrity of protective circuits)	-	946	Rs. 946 for effectiveness of protective circuit Cl. No. 10.5.2
10.9(Dielectric properties)	-	17204	16034 for Impulse withstand voltage for main circuit, for main isolation circuit, 1170 for Power frequency voltage for main circuit, for enclosure, for external handle
10.1(Verification of temperature rise)	-	167162	60500 for 800A to 1500A, 66005 for 1501A to 3000A, 86198 for 3001A to 4000A, 116059 for 4001A to 5000A, 138532 for 5001A to 6000A, 167162 for 6001A to 7000A test current
10.13(Mechanical operation)	-	6500	6500 per circuit
10.3(Degree of protection of ASSEMBLIES)	-	69891	-
10.11(Short-circuit withstand strength)	-	1534428	Including all withstand, conditonal and supplimentry tests
10.12(Electromagnetic compatibility (EMC))	-	125500	-
9.4(Electromagnetic compatibility (EMC))	-	45000	-
10.11(Short-circuit withstand strength)	-	4513037	1534428 for Including all withstand, conditonal and supplimentry tests upto 50kA, 4513037 for Including all withstand, conditonal and supplimentry tests upto 120kA.

30 Nov, 2028

-
-

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

Ceiling fan, Duct fan, Partition fan, pedestal fan, Table fan

24340 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking and Instructions)	-	500	-
7.0(Classification)	-	0	-
8.0(Protection against access to live parts)	-	500	-
10.0(Input and Current)	-	500	-
11.0(Heating)	-	850	-
13.0(Leakage Current and electric strength at operating temperature)	-	500	-
14.0(Transient Overvoltage)	-	6500	-
15.0(Moisture resistance)	-	2850	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	500	-
17.0(Overload Protection of transformer and associated circuit)	-	500	-
19.0(Abnormal Operation)	-	650	-
20.0(Stability and mechanical hazards)	-	500	-
21.0(Mechanical Strength)	-	1100	-
22.0(Construction)	-	550	-
23.0(Internal Wiring)	-	500	-
24.0(Components)	-	840	-
25.0(Supply Connection and External Flexible Cords)	-	1150	-
26.0(Terminals for external conductors)	-	500	-
27.0(Provision For Earthing)	-	500	-
28.0(Screws and Connections)	-	500	-
29.0(Creepage Distances and Clearances)	-	500	-
30.0(Resistance To Heat and Fire)	-	2850	-
31.0(Resistance To Rusting)	-	500	-
32.0(Radiation, Toxicity and Similar Hazards)	-	500	-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
19.11.4.1(Electrostatic discharges)	-	8500	If this test is applicable than additional test charges of Rs. 8500/- is applied over the total test charge of Rs. 24340/-
19.11.4.2(Radiated fields)	-	25000	If this test is applicable than additional test charges of Rs. 25000/- is applied over the total test charge of Rs. 24340/-
19.11.4.3(Fast transient bursts)	-	8500	If this test is applicable than additional test charges of Rs. 8500/- is applied over the total test charge of Rs. 24340/-
19.11.4.4(Surge immunity test)	-	16000	If this test is applicable than additional test charges of Rs. 16000/- is applied over the total test charge of Rs. 24340/-
19.11.4.5(Immunity to conducted discharges)	-	9500	If this test is applicable than additional test charges of Rs. 9500/- is applied over the total test charge of Rs. 24340/-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	15800	If this test is applicable than additional test charges of Rs. 15800/- is applied over the total test charge of Rs. 24340/-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
19.11.4.1(Electrostatic discharges)	-	8500	If this test is applicable than additional test charges of Rs. 8500/- is applied over the total test charge of Rs. 24340/-
19.11.4.2(Radiated fields)	-	25000	If this test is applicable than additional test charges of Rs. 25000/- is applied over the total test charge of Rs. 24340/-
19.11.4.3(Fast transient bursts)	-	8500	If this test is applicable than additional test charges of Rs. 8500/- is applied over the total test charge of Rs. 24340/-
19.11.4.4(Surge immunity test)	-	16000	If this test is applicable than additional test charges of Rs. 16000/- is applied over the total test charge of Rs. 24340/-
19.11.4.5(Immunity to conducted discharges)	-	9500	If this test is applicable than additional test charges of Rs. 9500/- is applied over the total test charge of Rs. 24340/-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	15800	If this test is applicable than additional test charges of Rs. 15800/- is applied over the total test charge of Rs. 24340/-

30 Nov, 2028

-
-

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

For Lead acid cells/batteries (Vented/monobloc/VRLA), Nickel batteries, Lithium batteries rating up to and including 800 Ah

1737300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Photovoltaic Energy System)	-	0	-
Cl-4.2(Secondary Cells and Batteries)	-	0	-
Cl-4.3(General Operating Conditions)	-	0	-
Cl-4.3.8(Storage)	-	0	-
Cl-4.3.9(Operating Temperature)	-	0	-
Cl-5.1(Mechanical Endurance)	-	0	-
Cl-5.2(Charge Efficiency)	-	0	-
Cl-5.3(Deep Discharge Protection)	-	0	-
Cl-5.4(Marking)	-	2300	-
Cl-5.5(Safety)	-	0	-
Cl-5.6(Documentation)	-	0	-
Cl-6(Functional characteristice)	-	0	-
Cl-7(General test conditions)	-	0	-
Cl-8.1(Capacity Test)	-	24000	Rs. 15,000/- for rated capacity (≤ 250 Ah), Rs. 20,000/- for rated capacity (˃ 250 Ah & ≤ 500 Ah), Rs. 23,000/- for rated capacity (˃ 500 Ah & ≤ 1000 Ah), Rs. 24,000/- for rated capacity (˃ 1000 Ah & ≤ 1500 Ah)
Cl-8.2(Endurance Test)	-	549000	Rs. 1, 90,000/- for rated capacity (≤ 250 Ah), Rs. 2, 76,000/- for rated capacity (˃ 250 Ah & ≤ 500 Ah), Rs. 3, 23,000/- for rated capacity (˃ 500 Ah & ≤ 1000 Ah), Rs. 5, 49,000/- for rated capacity (˃ 1000 Ah & ≤ 1500 Ah)
Cl-8.3(Charge Retention Test)	-	69000	Rs. 32,000/- for rated capacity (≤ 250 Ah), Rs. 40,000/- for rated capacity (˃ 250 Ah & ≤ 500 Ah), Rs. 45,000/- for rated capacity (˃ 500 Ah & ≤ 1000 Ah), Rs. 69,000/- for rated capacity (˃ 1000 Ah & ≤ 1500 Ah)
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	871000	Rs. 4, 15,000/- for rated capacity (≤ 250 Ah), Rs. 6, 83,000/- for rated capacity (˃ 250 Ah & ≤ 500 Ah), Rs. 8, 26,000/- for rated capacity (˃ 500 Ah & ≤ 1000 Ah), Rs. 8, 71,000/- for rated capacity (˃ 1000 Ah & ≤ 1500 Ah)
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	90000	Rs. 27,000/- for rated capacity (≤ 250 Ah), Rs. 44,000/- for rated capacity (˃ 250 Ah & ≤ 500 Ah), Rs. 52,000/- for rated capacity (˃ 500 Ah & ≤ 1000 Ah), Rs. 90,000/- for rated capacity (˃ 1000 Ah & ≤ 1500 Ah)
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	132000	Rs. 43,000/- for rated capacity (≤ 250 Ah), Rs. 63,000/- for rated capacity (˃ 250 Ah & ≤ 500 Ah), Rs. 75,000/- for rated capacity (˃ 500 Ah & ≤ 1000 Ah), Rs. 1, 32.000/- for rated capacity (˃ 1000 Ah & ≤ 1500 Ah)
Cl-9.1(Type Tests)	-	0	-
Cl-9.2(Acceptance Test)	-	0	-
4.3.7.1(Specific gravity)	-	0	-

30 Nov, 2028

-
-

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

600 mm to 1500 mm

43090 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	500	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	500	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	500	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	850	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	500	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	6500	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	2850	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	650	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	1100	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	550	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	500	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	840	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	1150	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	2850	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	500	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	500	-
10.1(Speed Regulators)	-	2250	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	500	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	500	-
13(Silent Operation)	-	500	-
14.3 & Table 1(Test for Air Performance)	-	9800	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	250	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	250	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	2250	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	2450	-
15.1, 15.2(Air delivery and service value)	-	9800	-
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	8500	if this test is applicable then additional test charge of Rs. 8500/- applicable above the regular test charge of Rs. 43090/-
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	25000	if this test is applicable then additional test charge of Rs. 25000/- applicable above the regular test charge of Rs. 43090/-
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	8500	if this test is applicable then additional test charge of Rs. 8500/- applicable above the regular test charge of Rs. 43090/-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	16000	if this test is applicable then additional test charge of Rs. 16000/- applicable above the regular test charge of Rs. 43090/-
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	9500	if this test is applicable then additional test charge of Rs. 9500/- applicable above the regular test charge of Rs. 43090/-
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	15800	if this test is applicable then additional test charge of Rs. 15800/- applicable above the regular test charge of Rs. 43090/-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	0	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	0	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	500	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	500	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	500	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	850	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	500	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	6500	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	2850	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	650	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	1100	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	550	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	500	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	840	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	1150	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	2850	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	500	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	500	-
10.1(Speed Regulators)	-	2250	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	500	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	500	-
13(Silent Operation)	-	500	-
14.3 & Table 1(Test for Air Performance)	-	9800	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	250	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	250	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	2250	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	2450	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	0	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	500	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	500	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	0	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	0	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	2250	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	500	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	500	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	9800	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	0	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	2450	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	500	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	850	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	2850	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	0	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	0	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	650	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	500	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	550	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	0	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	0	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	500	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	840	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	0	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	0	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	500	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	500	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	2850	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	0	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	500	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	500	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	500	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	500	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	850	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	500	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	6500	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	2850	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	650	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	1100	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	550	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	500	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	840	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	1150	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	2850	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	500	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	500	-
10.1(Speed Regulators)	-	2250	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	500	-
11.2(Starting)	-	500	-
12(Interchangeability)	-	500	-
13(Silent Operation)	-	500	-
14.3 & Table 1(Test for Air Performance)	-	9800	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	250	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	250	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	2250	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	2450	-
15.1, 15.2(Air delivery and service value)	-	9800	-
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	0	-
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	0	-
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	0	-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	0	-
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	0	-
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	0	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	0	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	0	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	500	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	500	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	500	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	850	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	500	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	6500	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	2850	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	650	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	1100	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	550	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	500	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	840	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	1150	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	500	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	2850	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	500	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	500	-
10.1(Speed Regulators)	-	2250	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	500	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	500	-
13(Silent Operation)	-	500	-
14.3 & Table 1(Test for Air Performance)	-	9800	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	250	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	250	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	2250	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	2450	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	0	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	500	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	500	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	0	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	0	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	2250	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	500	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	500	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	9800	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	0	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	2450	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	500	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	850	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	2850	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	0	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	0	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	650	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	500	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	550	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	0	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	0	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	500	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	840	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	0	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	500	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	500	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	500	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	2850	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	0	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	500	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-

30 Nov, 2028

-
-

IS 13340 : PART 1 (2024)

Shunt Power Capacitors of the Self-Healing Type for a.c. Systems Having a Rated Voltage up to and Including 1 000 V Part 1 General - Performance, Testing and Rating - Safety Requirements - Guide for Installation and Operation (Second Revision)

267790 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Capacitance measurement and output calculation)	-	1365	-
8(Measurement of the tangent of the loss angle (tan δ) of the capacitor)	-	2730	-
9(Voltage tests between terminals)	-	1365	-
10(Voltage tests between terminals and container)	-	1365	-
11(Voltage tests between terminals and container)	-	700	-
12(Sealing test)	-	1365	-
13(Thermal stability test)	-	26650	For 0-4 kVar 12300 Rs. , 5-10 kVar 13650 Rs. , 11-25 kVar 16400 Rs., 26-50 kVar 26650 Rs.
14("Measurement of the tangent of the loss angle (tan δ) of the capacitor at elevated temperature")	-	3450	-
15(Lightning impulse voltage test between terminals and container)	-	8610	-
16(Discharge test)	-	8195	Including All pre and post tests charges
17(Ageing test)	-	158665	For 0-10 kVar 1,26,945 1,24,215 Rs. , 11-25 kVar 1,31,895 Rs., 26-50 kVar 1,58,665 Rs., Including All pre and post tests charges
18(Self-healing test)	-	7530	0-25 kVar 6830 Rs. , 25-50 kVar 7530 Rs.
19(Destruction test)	-	45800	0-25 kVar 23250 Rs. 25-50 kVar 45800 Rs. Including all pre and post tests.
22(Discharge device)	-	1365	-
7(Capacitance measurement and output calculation)	-	1365	-
7(Capacitance measurement and output calculation)	-	1365	-
8(Measurement of the tangent of the loss angle (tan δ) of the capacitor)	-	2730	-
9(Voltage tests between terminals)	-	1365	-
10(Voltage tests between terminals and container)	-	1365	-
11(Voltage tests between terminals and container)	-	700	-
12(Sealing test)	-	1365	-
13(Thermal stability test)	-	26650	For 0-4 kVar 12300 Rs. , 5-10 kVar 13650 Rs. , 11-25 kVar 16400 Rs., 26-50 kVar 26650 Rs.
14("Measurement of the tangent of the loss angle (tan δ) of the capacitor at elevated temperature")	-	3450	-
15(Lightning impulse voltage test between terminals and container)	-	8610	-
16(Discharge test)	-	8195	Including All pre and post tests charges
17(Ageing test)	-	158665	For 0-10 kVar 1,26,945 1,24,215 Rs. , 11-25 kVar 1,31,895 Rs., 26-50 kVar 1,58,665 Rs., Including All pre and post tests charges
18(Self-healing test)	-	7530	0-25 kVar 6830 Rs. , 25-50 kVar 7530 Rs.
19(Destruction test)	-	45800	0-25 kVar 23250 Rs. 25-50 kVar 45800 Rs. Including all pre and post tests.
22(Discharge device)	-	1365	-
7(Capacitance measurement and output calculation)	-	1365	-
16(Discharge test)	-	8195	-
11(Voltage tests between terminals and container)	-	1365	-

30 Nov, 2028

-
-

IS/IEC 60947 : Part 5 : Sec 1 (2016)

Low-Voltage Switchgear And Control Gear : Part 5-1 Control Circuit Devices And Switching Elements Electromechanical Control Circuit Devices

---

1358476 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.2.2(Glow-wire testing)	-	3220	-
7.1.3(Current-carrying parts and their connections)	-	500	-
7.1.4(Clearances and creepage distances)	-	661	-
7.2.4.1(Making and breaking capacities)	-	22138	-
7.2.4.3(Durability)	-	194304	FOR SINGLE 8 TEST: Rs. 194304 FOR DOUBLE 3 TEST: Rs. 145728 And 10000 operations with 120 operating sequence per hour
7.2.3(Dielectric properties)	-	10286	-
8.1.5(Special tests)	-	194304	FOR SINGLE 8 TEST: Rs. 194304 FOR DOUBLE 3 TEST: Rs. 145728 And 10000 operations with 120 operating sequence per hour
8.2.1.1.1(Glow-wire test)	-	3220	-
8.2.3(Enclosures for equipment)	-	5500	-
8.2.4.2(Tests of mechanical strength of terminals)	-	2473	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	2473	-
8.2.4.4(Pull-out test)	-	2473	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	2473	-
8.2.5(Verification of actuating force (or moment))	-	3042	-
8.2.6(Verification of limitation of rotation (of a rotary switch))	-	3042	-
8.3.3.3(Temperature rise)	-	3306	-
8.3.3.4(Dielectric properties)	-	10286	-
8.3.3.2(Operating limits of contactor relays)	-	1852	-
8.3.3.5(Making and breaking capacities)	-	22138	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	20930	-
8.3.4.4 b)(Condition of the switching element after the test)	-	500	-
8.3.4.4 a)(Condition of the switching element after the test)	-	500	-
8.3.1(Degree of protection of enclosed control circuit devices)	-	5500	-
C.3(Electrical durability)	-	128200	FOR SINGLE 8 TEST: Rs. 128200 FOR DOUBLE 3 TEST: Rs. 96150 And 10000 operations with 120 operating sequence per hour
C.2(Mechanical durability)	-	66104	FOR SINGLE 8 TEST: Rs. 66104 FOR DOUBLE 3 TEST: Rs. 49578 And 10000 operations with 120 operating sequence per hour
F 8.1.2.6("Dielectric test after stresses")	-	1000	-
F.8.1.2.4(Impact test)	-	13156	-
F.8.1.2.5(Damp heat, cyclic)	-	18000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	10286	-
H.8.6("Performance under short circuit current conditions")	-	20930	-
H.8.5("Making and breaking capacities")	-	22138	-
J.8.5("Degree of protection for indicating towers")	-	5500	-
J.8.3.3.3(Temp-rise tests)	-	3306	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	10286	-
J.8.3.3.4(Dielectric test)	-	10286	-
J.7("Constructional requirements")	-	11465	-
K 8.3.4("Performance under conditional shortcircuit current")	-	20930	-
K 8.3.7(Verification of robustness of the actuating system)	-	11898	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	17584	-
K.8.3.6(Verification of direct opening action)	-	10286	-
7.3.2.4(Electrostatic discharges)	-	12000	-
7.3.2.5(Radiated radio-frequency electromagnetic fields)	-	40000	-
7.3.2.6(Electrical fast transients/bursts)	-	12000	-
7.3.2.7(Surges)	-	34000	-
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	12000	-
7.3.2.9(Power-frequency magnetic fields)	-	24000	-
7.3.2.10(Voltage dips and interruptions)	-	12000	-
7.3.2.11(Harmonics in the supply)	-	12000	-
7.3.3(Emission)	-	73000	-
8.4.2.4(Surges)	-	34000	-
H.8.7("Verification of electromagnetic compatibility")	-	197000	-
K 8.3.4("Performance under conditional shortcircuit current")	-	0	-
8.3.4.4 b)(Condition of the switching element after the test)	-	0	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	0	-
7.1.2.2(Glow-wire testing)	-	0	-
7.1.3(Current-carrying parts and their connections)	-	0	-
7.1.4(Clearances and creepage distances)	-	0	-
7.2.4.1(Making and breaking capacities)	-	0	-
7.2.4.3(Durability)	-	0	-
7.2.3(Dielectric properties)	-	0	-
8.1.5(Special tests)	-	0	-
8.2.1.1.1(Glow-wire test)	-	0	-
8.2.3(Enclosures for equipment)	-	0	-
8.2.4.2(Tests of mechanical strength of terminals)	-	0	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	0	-
8.2.4.4(Pull-out test)	-	0	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	0	-
8.2.5(Verification of actuating force (or moment))	-	0	-
8.2.6(Verification of limitation of rotation (of a rotary switch))	-	0	-
8.3.3.3(Temperature rise)	-	0	-
8.3.3.4(Dielectric properties)	-	0	-
8.3.3.2(Operating limits of contactor relays)	-	0	-
8.3.3.5(Making and breaking capacities)	-	0	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	0	-
8.3.4.4 b)(Condition of the switching element after the test)	-	0	-
8.3.4.4 a)(Condition of the switching element after the test)	-	0	-
8.3.1(Degree of protection of enclosed control circuit devices)	-	0	-
C.3(Electrical durability)	-	0	-
C.2(Mechanical durability)	-	0	-
F 8.1.2.6("Dielectric test after stresses")	-	0	-
F.8.1.2.4(Impact test)	-	0	-
F.8.1.2.5(Damp heat, cyclic)	-	0	-
F.8.1.2.1(Dielectric tests in new conditions)	-	0	-
H.8.6("Performance under short circuit current conditions")	-	0	-
H.8.5("Making and breaking capacities")	-	0	-
J.8.5("Degree of protection for indicating towers")	-	0	-
J.8.3.3.3(Temp-rise tests)	-	0	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	0	-
J.8.3.3.4(Dielectric test)	-	0	-
J.7("Constructional requirements")	-	0	-
K 8.3.4("Performance under conditional shortcircuit current")	-	0	-
K 8.3.7(Verification of robustness of the actuating system)	-	0	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	0	-
K.8.3.6(Verification of direct opening action)	-	0	-
7.3.2.4(Electrostatic discharges)	-	0	-
7.3.2.5(Radiated radio-frequency electromagnetic fields)	-	0	-
7.3.2.6(Electrical fast transients/bursts)	-	0	-
7.3.2.7(Surges)	-	0	-
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	0	-
7.3.2.9(Power-frequency magnetic fields)	-	0	-
7.3.2.10(Voltage dips and interruptions)	-	0	-
7.3.2.11(Harmonics in the supply)	-	0	-
7.3.3(Emission)	-	0	-
8.4.2.4(Surges)	-	0	-
H.8.7("Verification of electromagnetic compatibility")	-	0	-

30 Nov, 2028

-
-

IS/IEC 60947 : Part 4 : Sec 1 (2018)

Low-Voltage switchgear and controlgear : Part 4-1 Contactors and motor starters electromechanical contactors and motor-Starters

---

1533648 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.2.2(Glow wire testing)	-	3220	-
8.1.4(Clearances and creepage distances)	-	661	-
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	9919	9919/- For current above 200A and upto 1000A 3306/- For Current up to 200A
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	1852	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	1852	-
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	1852	-
8.2.1.5(Limits of operation of current sensing relays and releases)	-	9919	-
8.2.1.5.1.1(General tripping requirements of overload relays)	-	9919	-
8.2.1.5.1.2(Thermal memory test verification)	-	1852	-
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	1852	-
8.2.1.5.4.1(Limits of operation of under-current relays)	-	1852	-
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	9919	-
8.2.2(Temperature-rise)	-	9919	9919/- For current above 200A and upto 1000A 3306/- For Current up to 200A
8.2.3(Dielectric properties)	-	10286	-
8.2.4.3.1(Mechanical durability)	-	20125	For 10000 operations and120 operating cycles per hour
8.2.4.3.2(Electrical durability)	-	40250	40250/- For current above 1kA and up to 10kA (Per shift) 25789/- For Current above 200A and up to 1000A 11903/- For Current up to 200A
8.2.4.4(Overload current withstand capability of contactors)	-	9200	9200/- For current above 1000A 7475/- For Current up to 1000A
8.2.4.5(Coil power consumption)	-	1852	-
8.2.4.6(Pole impedance)	-	1852	-
9.3.3.2(Operating limits)	-	13381	-
9.3.3.2.1.2(Coil power consumption)	-	1852	-
9.3.3.2.1.3(Pole impedance)	-	1852	-
9.3.3.2.2(Relays and releases)	-	9919	-
9.3.3.3.2(Measurement of the temperature of parts)	-	9919	9919/- For current above 200A and upto 1000A 3306/- For Current up to 200A
9.3.3.3.3(Temperature-rise of a part)	-	9919	9919/- For current above 200A and upto 1000A 3306/- For Current up to 200A
9.3.3.3.4(Temperature-rise of the main circuit)	-	9919	9919/- For current above 200A and upto 1000A 3306/- For Current up to 200A
9.3.3.3.5(Temperature-rise of control circuits)	-	9919	9919/- For current above 200A and upto 1000A 3306/- For Current up to 200A
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	9919	9919/- For current above 200A and upto 1000A 3306/- For Current up to 200A
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	9919	9919/- For current above 200A and upto 1000A 3306/- For Current up to 200A
9.3.3.6(Operational performance capability)	-	40250	40250/- For current above 1kA and up to 10kA (Per shift) 24150/- For Current up to 1kA
9.3.5(Overload current withstand capability of contactors)	-	9200	9200/- For current above 1000A 7475/- For Current up to 1000A
9.3.6.3(Dielectric tests)	-	10286	-
9.3.6.4(Mechanical operation tests of a MPSD)	-	9919	-
F.7.2(Tests on products in a new condition)	-	10286	-
F.7.3(Test after conventional operational performance)	-	500	-
M.9.4(Thermal cycling test)	-	172057	-
M.9.5(Climatic test)	-	27919	-
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	2248	-
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	6038	-
M.9.11(Clearance and creepage distances)	-	661	-
8.1.12(Degrees of protection of enclosed equipment)	-	6038	-
8.3.2(Immunity)	-	124000	-
8.3.3(Emission)	-	73000	-
9.4.2.2(Electrostatic discharge)	-	12000	-
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	40000	-
9.4.2.4(Conducted disturbances induced by radio-frequency fields)	-	12000	-
9.4.2.5(Electrical fast transient/bursts)	-	12000	-
9.4.2.6(Surges)	-	34000	-
9.4.2.7(Power frequency magnetic field)	-	24000	-
9.4.2.8(Voltage dips and short-time interruptions)	-	12000	-
9.4.3(Emission)	-	12000	-
9.4.2.9(Harmonics in the supply)	-	12000	-
9.3.4.2.2(prospective current)	-	59800	59800/- For above 10kA and up to 50kA (Per shift) 40250/- For up to 10kA (Per shift)
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	598000	59800/- For above 10kA and up to 50kA (Per shift) 40250/- For up to 10kA (Per shift)
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	9919	-
9.3.6.2(Operation and operating limits)	-	9919	-
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	9200	9200/- For current above 1000A 7475/- For Current up to 1000A
8.2.5.1(Performance under short-circuit conditions)	-	59800	59800/- For above 10kA and up to 50kA (Per shift) 40250/- For up to 10kA (Per shift)
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	59800	59800/- For above 10kA and up to 50kA (Per shift) 40250/- For up to 10kA (Per shift)
P.2.3(Verification of operational performance capability)	-	40250	40250/- For current above 1kA and up to 10kA (Per shift) 25789/- For Current above 200A and up to 1000A 11903/- For Current up to 200A
P.2.4.2(Test voltage)	-	10286	-
P.4(Test of MPSD for IT system)	-	59800	59800/- For above 10kA and up to 50kA (Per shift) 40250/- For up to 10kA (Per shift)
M.8.3(Electromagnetic compatibility (EMC))	-	197000	-

30 Nov, 2028

-
-

IS/IEC 60947 : PART 3 (2020)

Low-Voltage Switchgear and Controlgear: Part 3 Switches Disconnectors Switch-Disconnectors and Fuse-Combination Units

1099770 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1(General)	-	0	-
8.1.2.2(Glow wire testing)	-	1725	-
8.1.7.1(General)	-	0	-
8.2.1(Operating conditions)	-	0	-
8.2.1.1(General)	-	0	-
8.2.1.2(Limits of operation of power operated equipment)	-	1852	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	1852	-
8.2.1.4(Limits of operation of shunt releases)	-	1852	-
8.2.2(Temperature-rise)	-	9919	-
8.2.3(Dielectric properties)	-	11372	-
8.2.3.2(Impulse withstand voltage)	-	9711	-
8.2.3.3(Power-frequency or DC withstand voltage of the main, auxiliary and control circuits)	-	500	-
8.2.4(Ability to make and break under no-load, normal load and overload conditions)	-	40250	-
8.2.4.1(Making and breaking capacities)	-	40250	-
8.2.4.2(Operational performance)	-	41400	41400/- For 1000A to 10 kA 16848/- For 600A to 1000A 14548/- For 320A to 600A 13225/- For 200A to 320A 11903/- For Up to 200A per shift
8.2.4.3(Mechanical durability)	-	20700	For 10000 operation & 120 operating cycles per hour
8.2.4.4(Electrical durability)	-	41400	41400/- For 1000A to 10 kA 16848/- For 600A to 1000A 14548/- For 320A to 600A 13225/- For 200A to 320A 11903/- For Up to 200A per shift
8.2.7(Additional performance requirements for equipment suitable for isolation)	-	1000	-
8.2.9(Overload requirements for equipment incorporating fuses)	-	41400	41400/- For 1000A to 10 kA 16848/- For 600A to 1000A 14548/- For 320A to 600A 13225/- For 200A to 320A 11903/- For Up to 200A per shift
9.1.3.2(Mechanical operation test)	-	661	-
9.1.3.2(Mechanical operation test)	-	661	-
9.1.3.3(Dielectric test)	-	500	-
9.1.4(Sampling tests)	-	661	-
9.1.5Special tests(Special tests)	-	7408	-
9.2(Compliance with constructional requirements)	-	661	-
9.3.4.2(Temperature-rise)	-	9919	-
9.3.4.3(Test of dielectric properties)	-	11372	-
9.3.4.4(Making and breaking capacities)	-	40250	per shift
9.3.4.4.3(Characteristics of transient recovery voltage)	-	40250	per shift
9.3.4.5(Dielectric verification)	-	500	-
9.3.4.6(Leakage current)	-	500	-
9.3.5.2(Operational performance test)	-	41400	per shift
9.3.8.2(Overload test)	-	9919	-
9.5.2(Mechanical durability)	-	20700	For 10000 operation & 120 operating cycles per hour
9.5.3(Electrical durability)	-	41400	41400/- For 1000A to 10 kA 16848/- For 600A to 1000A 14548/- For 320A to 600A 13225/- For 200A to 320A 11903/- For Up to 200A per shift
9.5.4(Damp heat, salt mist, vibration and shock)	-	3000	per day
D.8.1.4(Clearances and creepage distances)	-	661	-
D.8.1.12(Degrees of protection of enclosed equipment)	-	12500	-
D.9.3.10(Thermal cycling test)	-	3000	per day
D.9.3.11(Climatic test)	-	3000	per day
8.1.7.2(Additional constructional requirements)	-	661	-
8.1.9(Additional requirements for equipment provided with a neutral pol)	-	40250	per shift
9.3.4.7(Temperature-rise verification)	-	9919	-
9.3.4.8(Strength of actuator mechanism)	-	1612	-
9.3.5.3(Dielectric verification)	-	500	-
9.3.5.5(Temperature-rise verification)	-	9919	-
9.3.6.4(Dielectric verification)	-	500	-
9.3.6.6(Temperature-rise verification)	-	9919	-
9.3.7.4(Dielectric verification)	-	500	-
9.3.7.6(Temperature-rise verification)	-	9919	-
9.3.8.3(Dielectric verification)	-	500	-
9.3.8.5(Temperature-rise verification)	-	9919	-
9.3.5.4(Leakage current)	-	500	-
9.3.6.5(Leakage current)	-	500	-
9.3.7.5(Leakage current)	-	500	-
9.3.8.4(Leakage current)	-	500	-
9.3.6.2(Short-time withstand current test)	-	59800	40250/- up to 10 kA ( Per shift) 59800/- above 10 kA ( Per shift)
9.3.6.3(Short-circuit making capacity test)	-	59800	40250/- up to 10 kA ( Per shift) 59800/- above 10 kA ( Per shift)
9.3.7.2(Circuit-breaker protected short-circuit withstand)	-	59800	40250/- up to 10 kA ( Per shift) 59800/- above 10 kA ( Per shift)
9.3.7.3(Fuse protected short-circuit withstand)	-	59800	40250/- up to 10 kA ( Per shift) 59800/- above 10 kA ( Per shift)
E.9.3.1(Flexion test)	-	2473	-
E.9.3.2(Pull-out test)	-	2473	-
9.3.9.3(Critical load current performance)	-	41400	per shift
8.3(Electromagnetic compatibility tests)	-	204000	-

30 Nov, 2028

-
-

IS 1180 : Part 3 (2021)

Outdoor/Indoor Type Liquid Immersed Distribution Transformers Up to and Including 2 500 kVA, 33 kV — Specification Part 3 Natural/Synthetic Organic Ester Liquid Immersed

1115845 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16(Conservator for non-sealed typetransformers)	-	1012	Rs. 1012
20(Fittings)	-	1012	Rs. 1012
16(Conservator for non-sealed type transformers)	-	1012	Rs. 1012
21.2 a(Measurement of winding resistance [IS 2026 (Part 1)].)	-	-	-
21.2 b(Measurement of voltage ratio and check of phase displacement [IS 2026 (Part 1)].)	-	-	-
21.2 c(Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load [IS 2026 (Part 1)].)	-	-	-
21.2 d(Measurement of no-load loss and current [IS 2026 (Part 1)].)	-	-	-
21.2 e(Measurement of insulation resistance [IS 2026 (Part 1)].)	-	-	-
21.2 f(Induced over-voltage withstand test [IS 2026 (Part 3)].)	-	-	-
21.2 g(Separate-source voltage withstand test [IS 2026 (Part 3)])	-	-	-
21.3 b(Temperature-rise test [IS 2026 (Part 2)].)	-	-	-
21.3 c(Short-circuit withstand test [IS 2026 (Part 5)] (up to 200 kVA) and)	-	-	-
21.3 d(Pressure test)	-	-	-
21.4 a(Determination of sound levels [IS 2026 (Part 10)];)	-	-	-
21.4 b(Short-circuit withstand test [IS 2026 (Part 5)] (above 200 kVA);)	-	-	-
21.4 c(No load current at 112.5 percent voltage (see 6.9.2, 7.9.2, 8.9.2);)	-	-	-
21.4 d(Paint adhesion test — The test is performed as per ASTM D3359 (Standard Test Methods for measuring adhesion by tape test).)	-	-	-
21.5(Pressure and Ester Liquid Leakage Test)	-	-	-
6.9(Permissible Flux Density and Over Fluxing)	-	-	-
11(Minimum clearances in air)	-	-	-
14(Mounting Arrangement)	-	-	-
20(Fittings)	-	-	-
7.9(Permissible Flux Density and Overfluxing)	-	-	-
8.9(Permissible Flux Density and Overfluxing)	-	-	-
7.8(Losses and Impedance Values)	-	-	-
6.8(Table 3 Losses and Impedance Values)	-	-	-
8.8(Losses and Impedance Values)	-	-	-
17(Ability of Transformers to withstand external short circuit)	-	-	-
21.3 a(Lightning impulse test [IS 2026 (Part 3)].)	-	-	-
21.4 e(BDV and Moisture content of liquid in the transformer (IS 16081, IS 16099, IS 16899 or IS 16659, whichever is applicable).)	-	-	-
21.2(Routine Tests)	-	-	-
21.3(Types test)	-	-	-
21.4(Special Test)	-	-	-
6.8(Losses and Impedance Value)	-	-	-
6.9(Permissible flux density and over fluxing)	-	-	-
17(Ability of transformers to whitstand external short circuit)	-	-	-
11(Minimum clearances in air)	-	-	-
14(Mounting Arrangement)	-	-	-
21.5(Pressure and Ester Liquid Leakage Test)	-	-	-

30 Nov, 2028

-
-

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

Rated current up to 45 A, Voltage not exceeding 440 V

39850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	0	-
Cl-5(General notes on tests)	-	0	-
Cl-6(Rating)	-	500	-
Cl-7(Classification)	-	500	-
Cl-8(Marking)	-	500	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	500	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	0	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	0	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	0	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	0	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	0	-
Cl-11(Provision for earthing)	-	500	-
Cl-12(Terminals)	-	1800	For screw type terminals: Rs.500/- & For screwless termial : Rs.1800/-
Cl-13(Constructional requirements)	-	500	-
Cl-14(Mechanism)	-	500	-
Cl-15.1(Resistance to Ageing)	-	3350	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	0	-
Cl-15.3(Resistance to Humidity)	-	0	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	0	-
Cl-16.3(Electric Strength Test)	-	0	-
Cl-17(Temperature rise)	-	650	-
Cl-18(Making and breaking capacity)	-	1600	up to 6 A: Rs. 800/- Above 6 A - up to 45 A: Rs. 1600/-
Cl-19(Normal operation)	-	0	Individual test charges given for Cl. 19.1, 19.2 & 19.3
Cl-20(Mechanical strength)	-	500	-
Cl-21(Resistance to heat)	-	500	-
Cl-22(Screws, current carrying parts and connections)	-	200	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	500	-
Cl-24.1(Resistance to abnormal heat and fire)	-	2450	-
Cl-24.2(Resistance to tracking)	-	1800	-
Cl-25(Resistance to rusting)	-	500	-
19.1(Test for Switches Intended for Inductive Loads)	-	12000	Up to 6 A: Rs. 2550/- Above 6 A up to 32 A: Rs. 3850/- ABOVE 3 2A up to 45A : Rs. 12000/-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	3850	Up to 6 A: Rs. 2550/- Above 6 A up to 20 A: Rs. 3850/-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	12000	up to 20 A : Rs. 12000/-
13.5(Attachment of knobs)	-	0	-
Cl-4(General Requirements)	-	0	-
Cl-5(General notes on tests)	-	0	-
Cl-6(Rating)	-	500	-
Cl-7(Classification)	-	500	-
Cl-8(Marking)	-	500	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	500	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	0	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	0	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	0	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	0	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	0	-
Cl-11(Provision for earthing)	-	500	-
Cl-12(Terminals)	-	1800	For screw type terminals: Rs.500/- & For screwless termial : Rs.1800/-
Cl-13(Constructional requirements)	-	500	-
Cl-14(Mechanism)	-	500	-
Cl-15.1(Resistance to Ageing)	-	3350	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	0	-
Cl-15.3(Resistance to Humidity)	-	0	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	0	-
Cl-16.3(Electric Strength Test)	-	0	-
Cl-17(Temperature rise)	-	500	-
Cl-18(Making and breaking capacity)	-	1600	up to 6 A: Rs. 800/- Above 6 A - up to 45 A: Rs. 1600/-
Cl-19(Normal operation)	-	0	Individual test charges given for Cl. 19.1, 19.2 & 19.3
Cl-20(Mechanical strength)	-	500	-
Cl-21(Resistance to heat)	-	500	-
Cl-22(Screws, current carrying parts and connections)	-	2000	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	500	-
Cl-24.1(Resistance to abnormal heat and fire)	-	2450	-
Cl-24.2(Resistance to tracking)	-	0	-
Cl-25(Resistance to rusting)	-	500	-
19.1(Test for Switches Intended for Inductive Loads)	-	12000	Up to 6 A: Rs. 2550/- Above 6 A up to 32 A: Rs. 3850/- ABOVE 3 2A up to 45A : Rs. 12000/-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	3850	Up to 6 A: Rs. 2550/- Above 6 A up to 20 A: Rs. 3850/-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	12000	up to 20 A : Rs. 12000/-
13.5(Attachment of knobs)	-	0	-
Cl-17(Temperature rise)	-	650	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	0	-
12.3.12(Table 13)(Deflection Test Forces)	-	0	-
Cl-12(Terminals)	-	1800	For screw type terminals: Rs.500/- & For screwless terminal : Rs.1800/-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	0	-
12.3.12(Table 13)(Deflection Test Forces)	-	0	-

30 Nov, 2028

-
-

IS 17018 : Part 1 (2022)

Solar Photovoltaic Water Pumping Systems Part 1 Centrifugal Pumps Specification

Upto 10 HP

90000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1(Observation)	-	15000	NA
4.2.2(Observation)	-	0	NA
4.2.3(Provision for remote monitoring)	-	0	NA
4.3.1(STC Power (Wp))	-	0	NA
4.3.2(Observation)	-	0	NA
4.3.3(Observation)	-	0	NA
4.3.4(Observation)	-	0	NA
4.3.5(Observation)	-	0	NA
4.3.6(Salt mist corrosion test)	-	0	NA
4.3.7(Observation)	-	0	NA
4.3.8(STC Power (Wp))	-	0	NA
4.3.9(STC Power (Wp))	-	0	NA
4.3.10(Solar Photo Voltaic (SPV) Array)	-	0	NA
4.4.1(Motor- Pump set)	-	0	NA
4.4.2(Observation)	-	0	NA
4.4.3(Motor- Pump set Material)	-	0	NA
4.5.1(Module Mounting Structures and Tracking system)	-	0	NA
6.1(Observation)	-	0	NA
7.1(Litre/Wp, LPD, Head)	-	75000	NA
8.1.1(Observation)	-	0	NA
9(Observation)	-	0	NA
5(Litre, Litre/Wp)	-	0	NA

30 Nov, 2028

-
-

IS 15999 : Part 1 (2021)

Rotating electrical machines - Part 1 : Rating and performance

33200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.2(Observation)	-	1000	NA
11.1(Observation)	-	1000	NA
9.1(Resistance)	-	1200	NA
9.1(Voltage, Current, Power, Frequency, Speed)	-	2000	NA
9.4(Torque)	-	4000	NA
9.2(Voltage)	-	1000	NA
9.5(Torque)	-	5000	NA
9.7(Speed)	-	4000	NA
8.6.2(Temperature)	-	14000	NA
9.1(Observation (Direction of rotation))	-	0	Nil

30 Nov, 2028

-
-

IS 13573 : Part 2 (2011)

Cable accessories for extruded power cables - Specification: Part 2 for working voltages from 3.3 kV(Ue) up to and including 33 kV(E) - Test requirements (First Revision)

515550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table (2) to table (8) of IS 13573 Part-2:2011(Impulse voltage test at elevated temperature)	-	35000	NA
Table (2) to table (8) of IS 13573 Part-2:2011(Partial discharge test at ambient temperature )	-	12600	NA
Table (2) to table (8) of IS 13573 Part-2:2011(Impulse voltage test at ambient temperature )	-	35000	NA
Table (2,3,5,6&8) of IS 13573 Part-2 : 2011(Heating cycle in air )	-	94500	NA
Table (2,3,5,6&8) of IS 13573 Part-2 : 2011(Heating cycle in water )	-	94500	NA
Table (2) to table (8) of IS 13573 Part-2:2011(Examination )	-	1000	NA
Table (2) & Table (3) (Conductor resistance )	-	2300	NA
Table (2) to table (8) of IS 13573 Part-2:2011(a.c withstand or d.c withstand)	-	6300	NA
Table (2,3,5,&6) of IS 13573 Part-2 : 2011(Dynamic short circuit )	-	68770	Upto 50 KA for 1 sec
Table (2,3,5,&6) of IS 13573 Part-2 : 2011(Thermal short circuit (conductor))	-	68770	Upto 50 KA for 1 sec
Table (2,3,5,&6) of IS 13573 Part-2 : 2011(Thermal short circuit (screen))	-	68770	Upto 50 KA for 1 sec

30 Nov, 2028

-
-

IS 13730 : Part 2 (2018)

Specification for particular types of winding wires: Part 2 solderable polyurethane enamelled round copper wire, class 130, with a bonding layer (Second Revision)

829650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.No. 4(Dimensions)	-	500	NA
Cl.No. 5(Electrical Resistance)	-	600	NA
Cl.No. 6(Elongation )	-	600	NA
Cl.No.7(Springiness)	-	500	NA
Cl.No. 8(Flexibility & Adherence)	-	900	NA
Cl.No. 9(Heat shock test)	-	800	NA
Cl.No. 10(Cut through test)	-	850	NA
Cl.No. 11(Resistance to abrasion test )	-	850	NA
Cl.No. 13(Breakdown voltage test)	-	1800	NA
Cl.No. 14(Continuity of insulation test)	-	650	NA
Cl.No. 15(Temperature index)	-	821600	NA
Cl. No. 17(Solderability)	-	500	NA

30 Nov, 2028

-
-

IS 13730 : Part 27 (2018)

Specifications for Particular Types of Winding Wires Part 27 Paper Tape Covered Rectangular Copper Wire ( First Revision )

1700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 4(Dimensions)	-	500	NA
Cl. No. 5(Electrical Resistance)	-	600	NA
Cl. No. 6(Elongation)	-	600	NA

30 Nov, 2028

-
-

IS 13730 : Part 28 (2018)

Specifications for particular types of winding wires: Part 28 polyesterimide enamelled rectangular copper wire, class 180 (First Revision)

828150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.No. 4(Dimensions)	-	500	NA
Cl.No. 5(Electrical Resistance)	-	600	NA
Cl.No. 6(Elongation )	-	600	NA
Cl.No. 7(Springiness)	-	500	NA
Cl.No. 8(Flexibility & Adherence)	-	900	NA
Cl.No. 9(Heat shock )	-	800	NA
Cl.No. 12(Resistance to Solvent)	-	850	NA
Cl.No. 13(Breakdown voltage )	-	1800	NA
Cl.No. 15(Temperature index)	-	821600	NA
10(Cut through test)	-	850	NA

30 Nov, 2028

-
-

IS 14494 (2019)

Elastomer insulated flexible cables for use in mines - Specification (First Revision)

203880 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.2 a)(ARMOURING: Tensile Strength)	-	500	NA
11.2 b)(ARMOURING: Elongation )	-	500	NA
16.3(INSULATION : Tolerance on Insulation Thickness)	-	1300	NA
Table 33(a)(Annealing test)	-	600	NA
Table 33(a)(Conductor resistance test)	-	700	additional charges per core 500
16.2(INSULATION : Thickness of Insulation)	-	1300	additional charges per core 500
22.2(Thickness of Inner Sheath)	-	1300	NA
Table 33(b)(Diameter of armour wire)	-	500	NA
24.2(Thickness of Outer Sheath)	-	1300	NA
11.2 c)(ARMOURING: Torsion Test (For round wire ) )	-	500	NA
11.2 d)(ARMOURING: Uniformity of zinc coating)	-	500	NA
11.2 e)(ARMOURING: Mass of zinc coating )	-	500	NA
Table 33(c)(Resistivity of steel wire)	-	850	NA
Table 33(d)(Tensile strength on Insulation)	-	2000	additional charges per core 500
Table 33(d)(Ageing in air oven - Tensile strength on Insulation)	-	7000	additional charges per core 500
Table 33(d)(Ageing in air bomb - Tensile strength on Insulation)	-	2600	additional charges per core 500
Table 33(d)(Hot set on Insulation)	-	1200	additional charges per core 500
Table 33(d)(Ozone resistance on Insulation)	-	2100	additional charges per core 500
Table 33(e)(Tensile strength on Sheath)	-	1000	NA
Table 33(e)(Elongation at break on Sheath)	-	1000	NA
Table 33(e)(Ageing in air bomb - Tensile strength on Sheath)	-	1300	NA
Table 33(e)(Ageing in air bomb - Elongation on Sheath)	-	1300	NA
Table 33(e)(Hot set on Sheath)	-	1200	NA
Table 33(e)(Oil resistance - Tensile strength on sheath)	-	950	NA
Table 33(e)(Oil resistance - Elongation on sheath)	-	950	NA
Table 33(e)(Tear resistance on sheath)	-	750	NA
Table 33(f)(Insulation resistance)	-	1200	additional charges per core 500
27.2(Bending test followed by partial discharge test;)	-	3150	NA
Table 33(h), Cl. No. 27.2(Partial discharge test)	-	12600	NA
27.4(Dielectric power factor test)	-	22890	NA
27.5(Heating cycle test followed by partial discharge test;)	-	80640	NA
27.6(Impulse voltage test; and)	-	27300	NA
Table 33(n), Cl. No. 27.7(High Voltage test for 4 hrs.)	-	8400	NA
27.9(Water Absorption Test)	-	13000	additional charges per core 500
27.8(Flammability Test)	-	1000	NA

30 Nov, 2028

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

104850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	3000	---
1.6(Power interface .)	-	5000	---
1.7(Markings and instructions)	-	3300	---
2.1(Protection from electric shock and energy hazards)	-	26000	Total test charges for cl. no. 2 is Rs. 26000/-
2.2(SELV circuits)	-	0	Total test charges for cl. no. 2 is Rs. 26000/-
2.3(TNV circuits)	-	0	Total test charges for cl. no. 2 is Rs. 26000/-
2.4(Limited current circuits)	-	0	Total test charges for cl. no. 2 is Rs. 26000/-
2.5(Limited power sources .)	-	0	Total test charges for cl. no. 2 is Rs. 26000/-
2.6(Provisions for earthing and bonding)	-	0	Total test charges for cl. no. 2 is Rs. 26000/-
2.7(Overcurrent and earth fault protection in primary circuits)	-	0	Total test charges for cl. no. 2 is Rs. 26000/-
2.8(Safety interlocks)	-	0	Total test charges for cl. no. 2 is Rs. 26000/-
2.9(Electrical insulation)	-	0	Total test charges for cl. no. 2 is Rs. 26000/-
2.10(Clearances, creepage distances and distances through insulation)	-	0	Total test charges for cl. no. 2 is Rs. 26000/-
3.1(General)	-	11100	Total test charges for cl. no. 3 is Rs. 11100/-
3.2(Connection to a mains supply)	-	0	Total test charges for cl. no. 3 is Rs. 11100/-
3.3(Wiring terminals for connection of external conductors)	-	0	Total test charges for cl. no. 3 is Rs. 11100/-
3.4(Disconnection from the mains supply)	-	0	Total test charges for cl. no. 3 is Rs. 11100/-
3.5(Interconnection of equipment)	-	0	Total test charges for cl. no. 3 is Rs. 11100/-
4.1(Stability)	-	15700	Total test charges for cl. no. 4 is Rs. 15700/-
4.2(Mechanical strength)	-	0	Total test charges for cl. no. 4 is Rs. 15700/-
4.3(Design and construction)	-	0	Total test charges for cl. no. 4 is Rs. 15700/-
4.4(Protection against hazardous moving parts)	-	0	Total test charges for cl. no. 4 is Rs. 15700/-
4.5(Thermal requirements)	-	0	Total test charges for cl. no. 4 is Rs. 15700/-
4.6(Openings in enclosures)	-	0	Total test charges for cl. no. 4 is Rs. 15700/-
4.7(Resistance to fire)	-	0	Total test charges for cl. no. 4 is Rs. 15700/-
5.1(Touch current and protective conductor curren)	-	21750	Total test charges for cl. no. 5 is Rs. 21750/-
5.2(Electric strength)	-	0	Total test charges for cl. no. 5 is Rs. 21750/-
5.3(Abnormal operating and fault conditions)	-	0	Total test charges for cl. no. 5 is Rs. 21750/-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	10000	Total test charges for cl. no. 6 is Rs. 10000/-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	0	Total test charges for cl. no. 6 is Rs. 10000/-
6.3(Protection of the telecommunication wiring system from overheating)	-	0	Total test charges for cl. no. 6 is Rs. 10000/-
7.1(General)	-	9000	Total test charges for cl. no. 7 is Rs. 9000/-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	0	Total test charges for cl. no. 7 is Rs. 9000/-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	0	Total test charges for cl. no. 7 is Rs. 9000/-
7.4(Insulation between primary circuits and cable distribution systems)	-	0	Total test charges for cl. no. 7 is Rs. 9000/-

30 Nov, 2028

-
-

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

Capacity up to 10 kVA.

95000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Components)	-	3000	---
4.6(Power interface)	-	5000	---
4.7(Marking & instructions)	-	3300	---
5.1(Protection against shock and energy hazards)	-	26700	Test charge for cl. no. 5 is Rs. 26700/-
5.2(Requirement of auxiliary circuits)	-	0	Test charge for cl. no. 5 is Rs. 26700/-
5.3(Protective earthing and bonding)	-	0	Test charge for cl. no. 5 is Rs. 26700/-
5.4(AC and DC power isolation)	-	0	Test charge for cl. no. 5 is Rs. 26700/-
5.5(Over current and earth fault condition)	-	0	Test charge for cl. no. 5 is Rs. 26700/-
5.6(Safety interlocks)	-	0	Test charge for cl. no. 5 is Rs. 26700/-
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	0	Test charge for cl. no. 5 is Rs. 26700/-
6.1(Wiring, connections and supply)	-	15000	Test charge for cl. no. 6 is Rs. 15000/-
6.2(Connection to power)	-	0	Test charge for cl. no. 6 is Rs. 15000/-
6.3(Wiring terminals for external power conductors)	-	0	Test charge for cl. no. 6 is Rs. 15000/-
7.1(Enclosure)	-	20000	Test charge for cl. no. 7 is Rs. 20000/-
7.2(STABILITY)	-	0	Test charge for cl. no. 7 is Rs. 20000/-
7.3(MECHANICAL STRENGTH)	-	0	Test charge for cl. no. 7 is Rs. 20000/-
7.4(Construction details)	-	0	Test charge for cl. no. 7 is Rs. 20000/-
7.5(Resistance to fire)	-	0	Test charge for cl. no. 7 is Rs. 20000/-
7.6(Battery location)	-	0	Test charge for cl. no. 7 is Rs. 20000/-
7.7(Temperature rise)	-	0	Test charge for cl. no. 7 is Rs. 20000/-
8.1(General procision for earth leakage)	-	22000	Test charge for cl. no. 8 is Rs. 22000/-
8.2(Electric Strength)	-	0	Test charge for cl. no. 8 is Rs. 22000/-
8.3(Abnormal operating and fault conditions)	-	0	Test charge for cl. no. 8 is Rs. 22000/-
9.0(Connection to telecommunication networks)	-	0	Test charge for cl. no. 8 is Rs. 22000/-
Annex I.5(Solid-state backfeed protection)	-	0	---
I.5(transient overvoltages)	-	0	---
I.5(voltage variations)	-	0	---
I.5(electromagnetic susceptibility)	-	0	---
I.5(electrostatic discharge)	-	0	---

30 Nov, 2028

-
-

IS 15391 (2003)

Cold rolled non - Oriented electrical steel sheet and strip-semi-processed type - Specification

All Grades as per IS

6725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.1(Thickness)	-	575	Lamination Thickness for CRNO Semi Processed-Strips
Cl. No. 9.2 & Table-2 or Table-3(Polarization in Tesla)	-	4695	Magnetic Polarization for CRNO Semi Processed-Strips At 2500, 5000 & 10000 At/m
Cl. No. 9.3 & Table-2 or Table-3(Loss in W/kg)	-	1455	Specific Total Loss Measurement for CRNO Semi Processed -strips

30 Nov, 2028

-
-

IS 9974 : Part 1 (1981)

Specification for high pressure sodium vapour lamps: Part 1 general requirements and tests

100250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(MARKING)	-	280	Not Applicable
4.1(Lamp Dimensions )	-	500	Not Applicable
4.3.1(Caps)	-	0	Not Applicable
7.2.1(Lamp Starting Test : Lamp with External Starter)	-	220	Not Applicable
7.3.1(Lamp Worm-Up Test)	-	750	Not Applicable
10.2(Life Test)	-	89540	Not Applicable
7.4.1(Lamp Electrical Characteristics : Ageing)	-	3500	Not Applicable
7.4.2(Lamp Electrical Characteristics : Ageing)	-	0	Not Applicable
4.3.3(Caps)	-	0	Not Applicable
4.3.4(Caps : Insulation Resistance)	-	0	Not Applicable
7.2.2(Lamp Starting Test : Lamp with Internal Starter)	-	0	Not Applicable
10.1(5 000 hours operation, )	-	0	Not Applicable
10.2.1(Switching ‘on’ and switching ‘off’ during life test)	-	0	Not Applicable

30 Nov, 2028

-
-

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

Dry and Steam Iron Up to and including 5 kW

12495 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	0	---
6(Classification- IS 302-1)	-	0	---
7.1(Marking- IS 302-1)	-	350	Total test charge for cl. no. 7 is Rs. 350/-
7.1(Marking- IS 302-1)	-	0	Total test charge for cl. no. 7 is Rs. 350/-
7.1(Marking- IS 302-1)	-	0	Total test charge for cl. no. 7 is Rs. 350/-
7.1(Marking- IS 302-1)	-	0	Total test charge for cl. no. 7 is Rs. 350/-
7.1(Marking- IS 302-1)	-	0	Total test charge for cl. no. 7 is Rs. 350/-
7.1(Marking- IS 302-1)	-	0	Total test charge for cl. no. 7 is Rs. 350/-
7.1(Marking- IS 302-1)	-	0	Total test charge for cl. no. 7 is Rs. 350/-
7.1(Marking- IS 302-1)	-	0	Total test charge for cl. no. 7 is Rs. 350/-
7.1(Marking- IS 302-1)	-	0	Total test charge for cl. no. 7 is Rs. 350/-
7.3(Marking- IS 302-1)	-	0	Total test charge for cl. no. 7 is Rs. 350/-
7.4(Marking- IS 302-1)	-	0	Total test charge for cl. no. 7 is Rs. 350/-
7.6(Marking- IS 302-1)	-	0	Total test charge for cl. no. 7 is Rs. 350/-
7.7(Marking- IS 302-1)	-	0	Total test charge for cl. no. 7 is Rs. 350/-
7.8(Marking- IS 302-1)	-	0	Total test charge for cl. no. 7 is Rs. 350/-
7.11(Marking- IS 302-1)	-	0	Total test charge for cl. no. 7 is Rs. 350/-
7.12(Marking- IS 302-1)	-	0	Total test charge for cl. no. 7 is Rs. 350/-
7.13(Marking- IS 302-1)	-	0	Total test charge for cl. no. 7 is Rs. 350/-
7.14(Marking- IS 302-1)	-	0	Total test charge for cl. no. 7 is Rs. 350/-
7.15(Marking- IS 302-1)	-	0	Total test charge for cl. no. 7 is Rs. 350/-
7.101(Marking)	-	0	Total test charge for cl. no. 7 is Rs. 350/-
8( Protection Against Electric Shock, IS 302-1)	-	350	Total test charge for cl. no. 8 is Rs. 350/-
10(Power Input and Current, IS 302-1)	-	350	Total test charge for cl. no. 10 is Rs. 350/-
11(Heating, IS 302-1)	-	350	Total test charge for cl. no. 11 is Rs. 350/-
11(Heating, IS 302-1)	-	0	Total test charge for cl. no. 11 is Rs. 350/-
11(Heating, IS 302-1)	-	0	Total test charge for cl. no. 11 is Rs. 350/-
11(Heating, IS 302-1)	-	0	Total test charge for cl. no. 11 is Rs. 350/-
11(Heating, IS 302-1)	-	0	Total test charge for cl. no. 11 is Rs. 350/-
11(Heating, IS 302-1)	-	0	Total test charge for cl. no. 11 is Rs. 350/-
11(Heating, IS 302-1)	-	0	Total test charge for cl. no. 11 is Rs. 350/-
11(Heating, IS 302-1)	-	0	Total test charge for cl. no. 11 is Rs. 350/-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	350	Total test charge for cl. no. 13 is Rs. 350/-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	Total test charge for cl. no. 13 is Rs. 350/-
14(Transient Over Voltages, IS 302-1)	-	1895	Total test charge for cl. no. 14 is Rs. 1895/-
15.1(Moisture Resistance, IS 302-1)	-	1500	Total test charge for cl. no. 15 is Rs. 1500/-
15.2(Moisture Resistance, IS 302-1)	-	0	Total test charge for cl. no. 15 is Rs. 1500/-
15.3(Moisture Resistance, IS 302-1)	-	0	Total test charge for cl. no. 15 is Rs. 1500/-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	350	Total test charge for cl. no. 16 is Rs. 350/-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	Total test charge for cl. no. 16 is Rs. 350/-
19.4(Abnormal Operation, IS 302-1)	-	350	Total test charge for cl. no. 19 is Rs. 350/-
19.4(Abnormal Operation, IS 302-1)	-	0	Total test charge for cl. no. 19 is Rs. 350/-
19.5(Abnormal Operation, IS 302-1)	-	0	Total test charge for cl. no. 19 is Rs. 350/-
19.5(Abnormal Operation, IS 302-1)	-	0	Total test charge for cl. no. 19 is Rs. 350/-
19.7(Abnormal Operation)	-	0	Total test charge for cl. no. 19 is Rs. 350/-
19.9(Abnormal Operation)	-	0	Total test charge for cl. no. 19 is Rs. 350/-
19.1(Abnormal Operation)	-	0	Total test charge for cl. no. 19 is Rs. 350/-
19.101(Abnormal Operation)	-	0	Total test charge for cl. no. 19 is Rs. 350/-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	350	Total test charge for cl. no. 20 is Rs. 350/-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	Total test charge for cl. no. 20 is Rs. 350/-
21.1(Mechanical Strength, IS 302-1)	-	750	Total test charge for cl. no. 21 is Rs. 750/-
21.2(Mechanical Strength, IS 302-1)	-	0	Total test charge for cl. no. 21 is Rs. 750/-
21.101(Mechanical Strength, IS 302-2-3)	-	0	Total test charge for cl. no. 21 is Rs. 750/-
22(Construction, IS 302-1)	-	350	Total test charge for cl. no. 22 is Rs. 350/-
22.101(Construction)	-	0	Total test charge for cl. no. 22 is Rs. 350/-
22.102(Construction)	-	0	Total test charge for cl. no. 22 is Rs. 350/-
22.103(Construction)	-	0	Total test charge for cl. no. 22 is Rs. 350/-
22.104(Construction)	-	0	Total test charge for cl. no. 22 is Rs. 350/-
22.105(Construction)	-	0	Total test charge for cl. no. 22 is Rs. 350/-
22.106(Construction)	-	0	Total test charge for cl. no. 22 is Rs. 350/-
22.107(Construction)	-	0	Total test charge for cl. no. 22 is Rs. 350/-
23.1(Internal Wiring, IS 302-1)	-	350	Total test charge for cl. no. 23 is Rs. 350/-
23.2(Internal Wiring, IS 302-1)	-	0	Total test charge for cl. no. 23 is Rs. 350/-
23.3(Internal Wiring, IS 302-1)	-	0	Total test charge for cl. no. 23 is Rs. 350/-
23.4(Internal Wiring, IS 302-1)	-	0	Total test charge for cl. no. 23 is Rs. 350/-
23.5(Internal Wiring, IS 302-1)	-	0	Total test charge for cl. no. 23 is Rs. 350/-
23.6(Internal Wiring, IS 302-1)	-	0	Total test charge for cl. no. 23 is Rs. 350/-
23.7(Internal Wiring, IS 302-1)	-	0	Total test charge for cl. no. 23 is Rs. 350/-
23.8(Internal Wiring, IS 302-1)	-	0	Total test charge for cl. no. 23 is Rs. 350/-
23.9(Internal Wiring, IS 302-1)	-	0	Total test charge for cl. no. 23 is Rs. 350/-
23.10(Internal Wiring, IS 302-1)	-	0	Total test charge for cl. no. 23 is Rs. 350/-
24.1(Components, IS 302-1)	-	500	Total test charge for cl. no. 24 is Rs. 500/-
24.2(Components, IS 302-1)	-	0	Total test charge for cl. no. 24 is Rs. 500/-
24.4(Components, IS 302-1)	-	0	Total test charge for cl. no. 24 is Rs. 500/-
24.5(Components, IS 302-1)	-	0	Total test charge for cl. no. 24 is Rs. 500/-
24.6(Components, IS 302-1)	-	0	Total test charge for cl. no. 24 is Rs. 500/-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	750	Total test charge for cl. no. 25 is Rs. 750/-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Total test charge for cl. no. 25 is Rs. 750/-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Total test charge for cl. no. 25 is Rs. 750/-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Total test charge for cl. no. 25 is Rs. 750/-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Total test charge for cl. no. 25 is Rs. 750/-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Total test charge for cl. no. 25 is Rs. 750/-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Total test charge for cl. no. 25 is Rs. 750/-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Total test charge for cl. no. 25 is Rs. 750/-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Total test charge for cl. no. 25 is Rs. 750/-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Total test charge for cl. no. 25 is Rs. 750/-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Total test charge for cl. no. 25 is Rs. 750/-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Total test charge for cl. no. 25 is Rs. 750/-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Total test charge for cl. no. 25 is Rs. 750/-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Total test charge for cl. no. 25 is Rs. 750/-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Total test charge for cl. no. 25 is Rs. 750/-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Total test charge for cl. no. 25 is Rs. 750/-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Total test charge for cl. no. 25 is Rs. 750/-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Total test charge for cl. no. 25 is Rs. 750/-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Total test charge for cl. no. 25 is Rs. 750/-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Total test charge for cl. no. 25 is Rs. 750/-
26(Terminals for External Conductors, IS 302-1)	-	350	Total test charge for cl. no. 26 is Rs. 750/-
27.1(Provision for Earthing, IS 302-1)	-	350	Total test charge for cl. no. 27 is Rs. 350/-
27.2(Provision for Earthing, IS 302-1)	-	0	Total test charge for cl. no. 27 is Rs. 350/-
27.3(Provision for Earthing, IS 302-1)	-	0	Total test charge for cl. no. 27 is Rs. 350/-
27.4(Provision for Earthing, IS 302-1)	-	0	Total test charge for cl. no. 27 is Rs. 350/-
27.5(Provision for Earthing, IS 302-1)	-	0	Total test charge for cl. no. 27 is Rs. 350/-
28(Screws & Connections, IS 302-1)	-	350	Total test charge for cl. no. 28 is Rs. 350/-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	350	Total test charge for cl. no. 29 is Rs. 350/-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	Total test charge for cl. no. 29 is Rs. 350/-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1500	Total test charge for cl. no. 30 is Rs. 1500/-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	0	Total test charge for cl. no. 30 is Rs. 1500/-
31(Resistance of Rusting, IS 302-1)	-	350	Total test charge for cl. no. 31 is Rs. 1500/-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	350	Total test charge for cl. no. 32 is Rs. 350/-
16(Leakage current and electric strength)	-	0	Total test charge for cl. no. 16 is Rs. 350/-
19.11.4.1(Electrostatic discharges)	-	0	---
19.11.4.2(Radiated fields)	-	0	---
19.11.4.3(Fast transient bursts)	-	0	---
19.11.4.4(Surge immunity test)	-	0	---
19.11.4.5(Immunity to conducted discharges)	-	0	---
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	---
19.11.4.7(Harmonics)	-	0	---

30 Nov, 2028

-
-

IS 366 (1991)

Electric iron - Specification (Fourth Revision)

DRY TYPE Up to and including 5 kW

18450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.1 of IS 302-1))	-	350	---
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.2 of IS 302-1))	-	0	---
9.0(Protection against access to live parts (as per Cl. 8 of IS 302-2-3 and IS 302-1))	-	350	---
9.0(Power input and current (as per Cl. 10 of IS 302-2-3 and IS 302-1))	-	350	---
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	350	---
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	0	---
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	0	---
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	0	---
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	350	---
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	0	---
9.0(Transient Overvoltage (as per of Cl. 14 of IS 302-2-3 and Table 6 of IS 302-1))	-	1895	---
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	1500	---
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	0	---
16 of IS 302-2-3(Leakage current electric strength)	-	350	---
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	350	---
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	0	---
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	0	---
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	0	---
9.0(Staibilty and mechanical hazards (as per of Cl.20 of IS 302-2-3 and IS 302-1) )	-	350	---
9.0(Mechanical strength (as per of Cl.21 of IS 302-2-3 and IS 302-1) )	-	750	---
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	350	---
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	0	---
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	0	---
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	0	---
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	0	---
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	0	---
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	0	---
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	350	---
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	0	---
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	0	---
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	0	---
9.0(Components (as per of Cl.24 of IS 302-2-3 and IS 302-1) )	-	500	---
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	750	---
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	0	---
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	0	---
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	0	---
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	0	---
9.0(Terminals for external conductors (as per of Cl.26 of IS 302-2-3 and IS 302-1) )	-	350	---
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	350	---
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	0	---
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	0	---
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	0	---
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	350	---
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	0	---
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	350	---
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	0	---
9.0(Resistance to Heat and Fire (as per of Cl.30 of IS 302-2-3 and IS 302-1))	-	1500	---
9.0(Resistance to Rusting (as per of Cl.31 of IS 302-2-3 and IS 302-1))	-	350	---
10.0(Measurement of Heating up time)	-	350	---
10.0(Measurement of Heating up time)	-	0	---
11.0(Measurement of sole plate temperature)	-	1000	---
11.0(Measurement of sole plate temperature)	-	0	---
11.0(Measurement of sole plate temperature)	-	0	---
11.0(Measurement of sole plate temperature)	-	0	---
12.0(Measurement of Tempearture Distribution)	-	600	---
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	600	---
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	0	---
14.0(Measurement of Cyclic fluctuation of temperature of hottest point )	-	600	---
16.0(Measurement of Thermostatic staibility)	-	2455	---
16.0(Measurement of Thermostatic staibility)	-	0	---
16.0(Measurement of Thermostatic staibility)	-	0	---
16.0(Measurement of Thermostatic staibility)	-	0	---
16.0(Measurement of Thermostatic staibility)	-	0	---
16.0(Measurement of Thermostatic staibility)	-	0	---
17(Measurement of Thermostatic staibility)	-	350	---
15(MEASUREMENT OF TEMPERATURE DROP UNDER LOAD)	-	0	---

30 Nov, 2028

-
-

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

Convector heaters, Fan heaters, Heaters for use in gree

16350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	0	---
Cl.6 (Classification)	-	0	---
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	350	Test charge for cl. no. 7 is Rs. 350/-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.3(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.3(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.3(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.4(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.5(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.14(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.14(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.7.101(Marking and Instructions)	-	0	Test charge for cl. no. 7 is Rs. 350/-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	350	---
Cl.10 & IS:302-1:2008(Power Input and Current)	-	350	---
Cl.11 & IS:302-1:2008(Heating)	-	500	Test charge for cl. no. 11 is Rs. 500/-
Cl.11 & IS:302-1:2008(Heating)	-	0	Test charge for cl. no. 11 is Rs. 500/-
Cl.11 & IS:302-1:2008(Heating)	-	0	Test charge for cl. no. 11 is Rs. 500/-
Cl.11 & IS:302-1:2008(Heating)	-	0	Test charge for cl. no. 11 is Rs. 500/-
Cl.11 & IS:302-1:2008(Heating)	-	0	Test charge for cl. no. 11 is Rs. 500/-
Cl.11 & IS:302-1:2008(Heating)	-	0	Test charge for cl. no. 11 is Rs. 500/-
Cl.11 & IS:302-1:2008(Heating)	-	0	Test charge for cl. no. 11 is Rs. 500/-
Cl.11 & IS:302-1:2008(Heating)	-	0	Test charge for cl. no. 11 is Rs. 500/-
Cl.11 & IS:302-1:2008(Heating)	-	0	Test charge for cl. no. 11 is Rs. 500/-
Cl.11 & IS:302-1:2008(Heating)	-	0	Test charge for cl. no. 11 is Rs. 500/-
Cl.11 & IS:302-1:2008(Heating)	-	0	Test charge for cl. no. 11 is Rs. 500/-
Cl.11 & IS:302-1:2008(Heating)	-	0	Test charge for cl. no. 11 is Rs. 500/-
Cl.11 & IS:302-1:2008(Heating)	-	0	Test charge for cl. no. 11 is Rs. 500/-
Cl.11 & IS:302-1:2008(Heating)	-	0	Test charge for cl. no. 11 is Rs. 500/-
Cl.11 & IS:302-1:2008(Heating)	-	0	Test charge for cl. no. 11 is Rs. 500/-
Cl.11 & IS:302-1:2008(Heating)	-	0	Test charge for cl. no. 11 is Rs. 500/-
Cl.11.8(Heating)	-	0	Test charge for cl. no. 11 is Rs. 500/-
Cl.11.8(Heating)	-	0	Test charge for cl. no. 11 is Rs. 500/-
Cl.11.8(Heating)	-	0	Test charge for cl. no. 11 is Rs. 500/-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	350	Test charge for cl. no. 13 is Rs. 350/-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	0	Test charge for cl. no. 13 is Rs. 350/-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	2250	---
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	2550	---
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	350	Test charge for cl. no. 16 is Rs. 350/-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	0	Test charge for cl. no. 16 is Rs. 350/-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	0	---
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	2125	up to 1 kW : Rs. 700/- more than 1 kW : Rs. 2125/-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	up to 1 kW : Rs. 700/- more than 1 kW : Rs. 2125/-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	up to 1 kW : Rs. 700/- more than 1 kW : Rs. 2125/-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	up to 1 kW : Rs. 700/- more than 1 kW : Rs. 2125/-
Cl.19.101(Abnormal Operation.)	-	0	up to 1 kW : Rs. 700/- more than 1 kW : Rs. 2125/-
Cl.19.102(Abnormal Operation.)	-	0	up to 1 kW : Rs. 700/- more than 1 kW : Rs. 2125/-
Cl.19.103(Abnormal Operation.)	-	0	up to 1 kW : Rs. 700/- more than 1 kW : Rs. 2125/-
Cl.19.104(Abnormal Operation.)	-	0	up to 1 kW : Rs. 700/- more than 1 kW : Rs. 2125/-
Cl.19.105(Abnormal Operation.)	-	0	up to 1 kW : Rs. 700/- more than 1 kW : Rs. 2125/-
Cl.19.106(Abnormal Operation.)	-	0	up to 1 kW : Rs. 700/- more than 1 kW : Rs. 2125/-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	0	up to 1 kW : Rs. 700/- more than 1 kW : Rs. 2125/-
Cl.19.107(Abnormal Operation.)	-	0	up to 1 kW : Rs. 700/- more than 1 kW : Rs. 2125/-
Cl.19.108(Abnormal Operation.)	-	0	up to 1 kW : Rs. 700/- more than 1 kW : Rs. 2125/-
Cl.19.109(Abnormal Operation.)	-	0	up to 1 kW : Rs. 700/- more than 1 kW : Rs. 2125/-
Cl.19.110(Abnormal Operation.)	-	0	up to 1 kW : Rs. 700/- more than 1 kW : Rs. 2125/-
Cl.19.111(Abnormal Operation.)	-	0	up to 1 kW : Rs. 700/- more than 1 kW : Rs. 2125/-
Cl.19.112(Abnormal Operation.)	-	0	up to 1 kW : Rs. 700/- more than 1 kW : Rs. 2125/-
Cl.19.113(Abnormal Operation.)	-	0	up to 1 kW : Rs. 700/- more than 1 kW : Rs. 2125/-
Cl.19.114(Abnormal Operation.)	-	0	up to 1 kW : Rs. 700/- more than 1 kW : Rs. 2125/-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	350	---
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	500	Test charge for cl. no. 21 is Rs. 500/-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	0	Test charge for cl. no. 21 is Rs. 500/-
Cl.21.101 (Mechanical Strength.)	-	0	Test charge for cl. no. 21 is Rs. 500/-
Cl.21.102(Mechanical Strength.)	-	0	Test charge for cl. no. 21 is Rs. 500/-
Cl.21.103(Mechanical Strength.)	-	0	Test charge for cl. no. 21 is Rs. 500/-
Cl.22.1 of IS 302-1:2008(Construction)	-	1100	Test charge for cl. no. 22 is Rs. 1100/-
Cl.22.5 of IS 302-1:2008(Construction)	-	0	Test charge for cl. no. 22 is Rs. 1100/-
Cl.22.6 of IS 302-1:2008(Construction)	-	0	Test charge for cl. no. 22 is Rs. 1100/-
Cl.22.7 of IS 302-1:2008(Construction)	-	0	Test charge for cl. no. 22 is Rs. 1100/-
Cl.22.8 of IS 302-1:2008(Construction)	-	0	Test charge for cl. no. 22 is Rs. 1100/-
Cl.22.9 of IS 302-1:2008(Construction)	-	0	Test charge for cl. no. 22 is Rs. 1100/-
Cl.22.11(Construction)	-	0	Test charge for cl. no. 22 is Rs. 1100/-
Cl.22.12 of IS 302-1:2008(Construction)	-	0	Test charge for cl. no. 22 is Rs. 1100/-
Cl.22.13 of IS 302-1:2008(Construction)	-	0	Test charge for cl. no. 22 is Rs. 1100/-
Cl.22.14 of IS 302-1:2008(Construction)	-	0	Test charge for cl. no. 22 is Rs. 1100/-
Cl.22.15 of IS 302-1:2008(Construction)	-	0	Test charge for cl. no. 22 is Rs. 1100/-
Cl.22.18 of IS 302-1:2008(Construction)	-	0	Test charge for cl. no. 22 is Rs. 1100/-
Cl.22.20 of IS 302-1:2008(Construction)	-	0	Test charge for cl. no. 22 is Rs. 1100/-
Cl.22.21 of IS 302-1:2008(Construction)	-	0	Test charge for cl. no. 22 is Rs. 1100/-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	350	Test charge for cl. no. 23 is Rs. 350/-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	0	Test charge for cl. no. 23 is Rs. 350/-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	0	Test charge for cl. no. 23 is Rs. 350/-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	0	Test charge for cl. no. 23 is Rs. 350/-
C.23.7 of 302-1:2008(Internal Wiring )	-	0	Test charge for cl. no. 23 is Rs. 350/-
Cl.24.1 of 302-1:2008(Component)	-	350	Test charge for cl. no. 24 is Rs. 350/-
Cl.24.1 of 302-1:2008(Component)	-	0	Test charge for cl. no. 24 is Rs. 350/-
Cl.24.1.3 (Component)	-	0	Test charge for cl. no. 24 is Rs. 350/-
Cl.24.1.3 (Component)	-	0	Test charge for cl. no. 24 is Rs. 350/-
Cl.24.1.3 (Component)	-	0	Test charge for cl. no. 24 is Rs. 350/-
Cl.24.1.3 (Component)	-	0	Test charge for cl. no. 24 is Rs. 350/-
C.24.1.4(Component)	-	0	Test charge for cl. no. 24 is Rs. 350/-
C.24.2 of 302-1:2008(Component)	-	0	Test charge for cl. no. 24 is Rs. 350/-
Cl.24.10(Component)	-	0	Test charge for cl. no. 24 is Rs. 350/-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	700	Test charge for cl. no. 25 is Rs. 700/-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	0	Test charge for cl. no. 25 is Rs. 700/-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	Test charge for cl. no. 25 is Rs. 700/-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	Test charge for cl. no. 25 is Rs. 700/-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	Test charge for cl. no. 25 is Rs. 700/-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	Test charge for cl. no. 25 is Rs. 700/-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	0	Test charge for cl. no. 25 is Rs. 700/-
Cl.25.8(Supply Connection and External Flexible Cords )	-	0	Test charge for cl. no. 25 is Rs. 700/-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	0	Test charge for cl. no. 25 is Rs. 700/-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	Test charge for cl. no. 25 is Rs. 700/-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	0	Test charge for cl. no. 25 is Rs. 700/-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	0	Test charge for cl. no. 25 is Rs. 700/-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	0	Test charge for cl. no. 25 is Rs. 700/-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	Test charge for cl. no. 25 is Rs. 700/-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	Test charge for cl. no. 25 is Rs. 700/-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	Test charge for cl. no. 25 is Rs. 700/-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	Test charge for cl. no. 25 is Rs. 700/-
Cl.25.18(Supply Connection and External Flexible Cords )	-	0	Test charge for cl. no. 25 is Rs. 700/-
Cl.25.20(Supply Connection and External Flexible Cords )	-	0	Test charge for cl. no. 25 is Rs. 700/-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	350	Test charge for cl. no. 26 is Rs. 350/-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	0	Test charge for cl. no. 26 is Rs. 350/-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	0	Test charge for cl. no. 26 is Rs. 350/-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	350	Test charge for cl. no. 27 is Rs. 350/-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	0	Test charge for cl. no. 27 is Rs. 350/-
Cl.28 of 302-1:2008(Screws and Connections.)	-	350	---
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	350	Test charge for cl. no. 29 is Rs. 350/-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	0	Test charge for cl. no. 29 is Rs. 350/-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	2025	Test charge for cl. no. 30 is Rs. 2025/-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	0	Test charge for cl. no. 30 is Rs. 2025/-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	350	---
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	0	Test charge for cl. no. 30 is Rs. 2025/-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	350	---
19.11.4.1(Electrostatic discharges)	-	0	---
19.11.4.2(Radiated fields)	-	0	---
19.11.4.3(Fast transient bursts)	-	0	---
19.11.4.4(Surge immunity test)	-	0	---
19.11.4.5(Injected currents)	-	0	---
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	---
19.11.4.7(Harmonics)	-	0	---

30 Nov, 2028

-
-

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Electrical Research and Development Association, gujurat

ERDA Road, GIDC, Makarpura, Vadodara, VADODARA, Vadodara, Gujarat, 390010

9987940924 nirav.taunk@erda.org

Scope List