BIS - LIMS (Laboratory Information Management System)

ELECTROEDGE LABORATORY LLP

A-7, Kh. No-234, Pragati Enclave, Lane Number 22, Mukundpur, Part-2, Delhi, 110042, Delhi, North, Delhi, 110042

9625947165 electroedgelaboratory@gmail.com

Scope List

Reset

6 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	-
8(Protection against accidental contact with live parts)	-	4000	-
9(Terminals)	-	4000	-
10(PROVISION FOR EARTHING)	-	4000	-
11(MOISTURE RESISTANCE)	-	4000	-
12(Electric Strength)	-	4000	-
13(Thermal endurance test for winding of ballasts)	-	4000	-
14(Fault conditions)	-	4000	-
15(Transformer heating)	-	4000	-
16(Construction)	-	4000	-
17(Creepage distance and clearances)	-	4000	-
18(Screws, current carrying parts and connections)	-	4000	-
19(Resistance to heat, fire and tracking)	-	4000	-
20(Resistance to corrosion)	-	4000	-
7(Marking)	-	2000	-
8("PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS")	-	4000	-
9(TERMINALS)	-	4000	-
10(PROVISIONS FOR PROTECTIVE EARTHING)	-	4000	-
11(MOISTURE RESISTANCE AND INSULATION)	-	4000	-
12(ELECTRIC STRENGTH)	-	4000	-
14(FAULT CONDITIONS)	-	4000	-
15(TRANSFORMER HEATING)	-	4000	-
16(CONSTRUCTION)	-	4000	-
17(CREEPAGE DISTANCES AND CLEARANCES)	-	4000	-
18("SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS")	-	4000	-
19(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	4000	-
20(RESISTANCE TO CORROSION)	-	4000	-
4(GENERAL REQUIREMENTS)	-	4000	-
5(GENERAL NOTES ON TESTS)	-	4000	-
6(CLASSIFICATION)	-	4000	-
16(Enclosures)	-	4000	-

12 Mar, 2029

-
Exclusion: 16 (Bridging resistor in primary circuit), 16 (Capacitor and RC units), 16 (RF suppression (X-Y capacitors)), 16 (Inductor), 16 (Inductor), 16 (MOV/VDR), 16 (SMPS/Mains Transformer), 16 (PCB material), 19 (Metal base PCB for LED), 19 (Transparent cover), 19 (Bobbin), 16 (Insulated tape), 16 (Heat shrinkage sleeve) , 19 (Terminals), 16 (Connector), 16 (Fuse), 16 (Internal wire), 16 (LED), 16 (Opto-coupler), 16 (EMI/EMC filter), 16 (Winding wire), 16 (Thin sheet materials)

IS 10322 : Part 5 : Sec 9 (2017)

Luminaires: Part 5 particular requirements: Sec 9 rope lights

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.4(General Test Requireements)	-	2000	-
21.5(Classification of Luminaires')	-	2000	-
21.6(Marking)	-	2000	-
21.7(Construction)	-	2000	-
21.8(Creepage Distance and Clearances)	-	2000	-
21.9(Provision for earthing)	-	2000	-
21.10(Terminals)	-	2000	-
21.11(External & Internal Wiring)	-	2000	-
21.12(Protection against electric shock)	-	2000	-
21.13(Endurance Tests and Thermal Tests)	-	2000	-
21.14(Resistance to Dust & Moisture)	-	2000	-
21.15(Insulation Resistance and Electric Strength)	-	2000	-
21.16(Resistance to Heat , fire and tracking)	-	2000	-
21.7.1(General)	-	2000	-
21.7.3(Terminals and supply connections)	-	2000	-
21.7.4(Control units)	-	2000	-
21.7.5(Mechanical strength)	-	2000	-

12 Mar, 2029

-
Exclusion: Cl.4.24 (UV Radiation), Cl. 4.20 (Vibration), 4.26 (Short Circuit Protection)

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.4(General Test Requireements)	-	2000	-
20.5(Classification of Luminaires')	-	2000	-
20.6(Marking)	-	2000	-
20.7(Construction)	-	2000	-
20.8(Creepage Distance and Clearances)	-	2000	-
20.9(Provision for earthing)	-	2000	-
20.10(Terminals)	-	2000	-
20.11(External & Internal Wiring)	-	2000	-
20.12(Protection against electric shock)	-	2000	-
20.13(Endurance Tests and Thermal Tests)	-	2000	-
20.14(Resistance to Dust & Moisture)	-	2000	-
20.15(Insulation Resistance and Electric Strength)	-	2000	-
20.16(Resistance to Heat , fire and tracking)	-	2000	-

12 Mar, 2029

-
Exclusion: Cl.4.24 (UV Radiation), Cl. 4.20 (Vibration), 4.26 (Short Circuit Protection)

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	2000	-
6(Interchangeability)	-	4000	-
7(Protection against accidental contact with live parts)	-	4000	-
8(Insulation Resistance and Electric Strength)	-	4000	-
9(MECHANICAL STRENGTH)	-	4000	-
10(cap temperature)	-	4000	-
11(Resistance to Heat)	-	4000	-
12(Resistance to Flame and Ignition)	-	4000	-
13(Fault conditions)	-	4000	-
14(Creepage distance and clearances)	-	4000	-
4(General requirement and General test requirements)	-	4000	-
5(Marking)	-	4000	-
6(Interchangeability)	-	4000	-
7(Protection against accidental contact with live parts)	-	4000	-
8(Strength after humidity treatment)	-	4000	-
9(Mechanical strength)	-	4000	-
10(Cap temperature rise)	-	4000	-
11(Resistance to heat)	-	4000	-
12(Resistance to flame and ignition)	-	4000	-
13(Fault conditions)	-	4000	-
14(Creepage distances and clearances)	-	4000	-
4(GENERAL REQUIREMENT AND GENERAL TEST REQUIREMENTS)	-	4000	-

12 Mar, 2029

-
-

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	2000	-
5(Classification of Luminaires')	-	2000	-
6.0(Marking)	-	2000	-
7.0(Construction)	-	2000	-
8.0(Creepage Distance and Clearances)	-	4000	-
9.0(Provision for earthing)	-	4000	-
10.0(Terminals)	-	4000	-
11.0(External & Internal Wiring)	-	4000	-
12.0(Protection against electric shock)	-	4000	-
13.0(Endurance Tests and Thermal Tests)	-	4000	-
14.0(Resistance to Dust & Moisture)	-	4000	-
15.0(Insulation Resistance and Electric Strength)	-	4000	-
16.0(Resistance to Heat , fire and tracking)	-	4000	-

12 Mar, 2029

-
Exclusion: 17.0 (Photometric Test), (Cl.4.24) (Annex-P) (UV Radiations for metal halide lamps), 4.26.2 (Short Circuit Protection)

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	1000	-
8.1,a(Marking )	-	1000	-
8.1,b(Marking )	-	1000	-
8.1,c(Marking )	-	1000	-
8.1,d(Marking )	-	1000	-
8.1,e(Marking )	-	1000	-
8.1,f(Marking )	-	1000	-
8.1,g(Marking )	-	1000	-
8.2(Marking )	-	1000	-
8.3,a(Marking )	-	1000	-
8.3,b(Marking )	-	1000	-
8.3,c(Marking )	-	1000	-
8.3,d(Marking )	-	1000	-
8.3,e(Marking )	-	1000	-
8.4(Marking )	-	1000	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	1000	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	1000	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	1000	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	1000	-
6.2(Rating)	-	1000	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	1000	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	1000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	1000	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	1000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	1000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	1000	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	1000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	1000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	1000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	1000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	1000	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	1000	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	1000	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	1000	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	1000	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	1000	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	1000	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	1000	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	1000	-
10.1(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.3(Speed Regulators)	-	1000	-
10.4(Speed Regulators)	-	1000	-
10.5(Speed Regulators)	-	1000	-
10.6(Speed Regulators)	-	1000	-
10.7(Speed Regulators)	-	1000	-
10.7(Speed Regulators)	-	1000	-
10.8(Speed Regulators)	-	1000	-
11.1(Starting)	-	1000	-
11.2(Starting)	-	1000	-
12(Interchangeability)	-	1000	-
13(Silent Operation)	-	1000	-
14.3 & Table 1(Test for Air Performance)	-	1000	-
14.3 & Table 1(Test for Air Performance)	-	1000	-
14.4(Measurement of Speed of the Fan )	-	1000	-
14.4(Measurement of Speed of the Fan )	-	1000	-
14.5(Measurement of Power factor and Power Input)	-	1000	-
14.5(Measurement of Power factor and Power Input)	-	1000	-
16(Endurance Test)	-	1000	-
16(Endurance Test)	-	1000	-
16(Endurance Test)	-	1000	-
16(Endurance Test)	-	1000	-
16(Endurance Test)	-	1000	-
16(Endurance Test)	-	1000	-
17(Test for Harmonic Distortion)	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	1000	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	1000	-
8.1,a(Marking )	-	1000	-
8.1,b(Marking )	-	1000	-
8.1,c(Marking )	-	1000	-
8.1,d(Marking )	-	1000	-
8.1,e(Marking )	-	1000	-
8.1,f(Marking )	-	1000	-
8.1,g(Marking )	-	1000	-
8.2(Marking )	-	1000	-
8.3(Marking )	-	1000	-
8.3,a(Marking )	-	1000	-
8.3,b(Marking )	-	1000	-
8.3,c(Marking )	-	1000	-
8.3,d(Marking )	-	1000	-
8.3,e(Marking )	-	1000	-
8.4(Marking )	-	1000	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	1000	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	1000	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	1000	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	1000	-
6.2(Rating)	-	1000	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	1000	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	1000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	1000	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	1000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	1000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	1000	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	1000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	1000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	1000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	1000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	1000	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	1000	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	1000	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	1000	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	1000	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	1000	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	1000	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	1000	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	1000	-
10.1(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.3(Speed Regulators)	-	1000	-
10.4(Speed Regulators)	-	1000	-
10.5(Speed Regulators)	-	1000	-
10.6(Speed Regulators)	-	1000	-
10.7(Speed Regulators)	-	1000	-
10.7(Speed Regulators)	-	1000	-
10.8(Speed Regulators)	-	1000	-
11.1(Starting)	-	1000	-
11.2(Starting)	-	1000	-
12(Interchangeability)	-	1000	-
13(Silent Operation)	-	1000	-
14.3 & Table 1(Test for Air Performance)	-	1000	-
14.3 & Table 1(Test for Air Performance)	-	1000	-
14.4(Measurement of Speed of the Fan )	-	1000	-
14.4(Measurement of Speed of the Fan )	-	1000	-
14.5(Measurement of Power factor and Power Input)	-	1000	-
14.5(Measurement of Power factor and Power Input)	-	1000	-
16(Endurance Test)	-	1000	-
16(Endurance Test)	-	1000	-
16(Endurance Test)	-	1000	-
16(Endurance Test)	-	1000	-
16(Endurance Test)	-	1000	-
16(Endurance Test)	-	1000	-
17(Test for Harmonic Distortion)	-	1000	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL NOTES ON TESTS)	-	1000	-
15.1, 15.2(Air delivery and service value)	-	1000	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	1000	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	1000	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	1000	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	1000	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	1000	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	1000	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	1000	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	1000	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	1000	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	1000	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	1000	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	1000	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	1000	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	1000	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	1000	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	1000	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	1000	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	1000	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	1000	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	1000	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	1000	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	1000	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	1000	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	1000	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	1000	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	1000	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	1000	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	1000	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	1000	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	1000	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	1000	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	1000	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	1000	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	1000	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	1000	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	1000	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	1000	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	1000	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	1000	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	1000	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	1000	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	1000	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	1000	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	1000	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	1000	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	1000	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	1000	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	1000	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	1000	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	1000	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	1000	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	1000	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	1000	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	1000	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	1000	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	1000	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	1000	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	1000	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	1000	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	1000	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	1000	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	1000	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	1000	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	1000	-
10.2(Speed Regulators)	-	1000	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	1000	-
10.2(Speed Regulators)	-	1000	-

12 Mar, 2029

-
Exclusion: Cl-19.11.4.1 to Cl-19.11.4.7 (EMI/EMC)

Bureau of Indian Standards

The National Standards Body of India

ELECTROEDGE LABORATORY LLP

A-7, Kh. No-234, Pragati Enclave, Lane Number 22, Mukundpur, Part-2, Delhi, 110042, Delhi, North, Delhi, 110042

9625947165 electroedgelaboratory@gmail.com

Scope List