BIS - LIMS (Laboratory Information Management System)

CIPET KOCHI

( Formerly Known as Centre for Biopolymer Science & Technology ), 196 A, HIL Colony, Pathalam, Edayar Road,Eloor, Udyogamandal.P.O., Kochi, KOCHI, Ernakulam, Kerala, 683501

8129497182 cipetkochi@gmail.com

Scope List

Reset

26 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

39633 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Timber)	-	500	25% discount on test charges
Cl-5.2(Adhesives for Bonding of Veneers)	-	0	Included in test charge for timber
Cl-6.1(Manufacture)	-	0	Included in test charge for timber
Cl-6.2(Manufacture ( Thickness of veneers))	-	0	Included in test charge for timber
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	Included in test charge for timber
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	Included in test charge for timber
Cl-6.5(Manufacture (Scarf joints))	-	0	Included in test charge for timber
Cl-6.6(Manufacture ( Preservative treatment))	-	0	Included in test charge for timber
Cl-7.1(Dimensions (length, width))	-	375	25% discount on test charges
Cl-7.2(Thickness)	-	187.5	25% discount on test charges
Cl-7.3(Squareness and Edge Straightness)	-	375	25% discount on test charges
Cl-8.1, 8.2(Workmanship and finish)	-	0	Included in test charge for timber
Cl-10.3(Moisture Content)	-	675	25% discount on test charges
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength)	-	1325	25% discount on test charges and specimen preparation charges
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	187.5	25% discount on test charges
Cl-10.5, 10.5.1(Resistance to Water Test)	-	1800	specimen preparation charges
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	1325	25% discount on test charges and specimen preparation charges
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	187.5	25% discount on test charges
Cl-10.5.2(Water Resistance Test (Alternate method))	-	1800	specimen preparation charges
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	1800	specimen preparation charges
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	5262.5	25% discount on test charges
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	187.5	25% discount on test charges
Cl-10.8(Tensile Strength)	-	2650	25% discount on test charges and specimen preparation charges
Cl-10.9, Table-3("Static Bending Strength -Modulus of Elasticity (MOE),")	-	2150	25% discount on test charges and specimen preparation charges
Cl-10.9, Table-3("Static Bending Strength- Modulus of Rupture (MOR), ")	-	2150	25% discount on test charges and specimen preparation charges
Cl-10.10, Table-4(Wet Bending Strength -Modulus of Elasticity (MOE),)	-	2150	25% discount on test charges and specimen preparation charges
Cl-10.10, Table-4(Wet Bending Strength - Modulus of Rupture (MOR),)	-	2150	25% discount on test charges and specimen preparation charges
Cl-10.11(Retention of Preservative)	-	2750	25% discount on test charges and specimen preparation charges
Cl-10.12(Formaldehyde Content Test)	-	2250	25% discount on test charges
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	3750	25% discount on test charges
Cl-5.1(Timber)	-	500	-
Cl-5.2(Adhesives for Bonding of Veneers)	-	0	-
Cl-6.1(Manufacture)	-	0	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	0	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	-
Cl-6.5(Manufacture (Scarf joints))	-	0	-
Cl-6.6(Manufacture ( Preservative treatment))	-	0	-
Cl-7.1(Dimensions (length, width))	-	375	-
Cl-7.2(Thickness)	-	187.5	-
Cl-7.3(Squareness and Edge Straightness)	-	375	-
Cl-8.1, 8.2(Workmanship and finish)	-	0	-
Cl-10.3(Moisture Content)	-	675	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength)	-	1325	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	187.5	-
Cl-10.5, 10.5.1(Resistance to Water Test)	-	187.5	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	1800	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	187.5	-
Cl-10.5.2(Water Resistance Test (Alternate method))	-	1800	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	1800	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	5262.5	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	187.5	-
Cl-10.8(Tensile Strength)	-	2650	-
Cl-10.9, Table-3("Static Bending Strength -Modulus of Elasticity (MOE),")	-	2150	-
Cl-10.9, Table-3("Static Bending Strength- Modulus of Rupture (MOR), ")	-	2150	-
Cl-10.10, Table-4(Wet Bending Strength -Modulus of Elasticity (MOE),)	-	2150	-
Cl-10.10, Table-4(Wet Bending Strength - Modulus of Rupture (MOR),)	-	2150	-
Cl-10.11(Retention of Preservative)	-	2750	-
Cl-10.12(Formaldehyde Content Test)	-	2250	-
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	3750	-

Complete

31 Dec, 2026

-
Included w.e.f. 13.02.2025

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

35105 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Timber)	-	1350	25% discount on test charges
Cl-4.2(Adhesive)	-	0	Included in test charges for timber
Cl-5.1(Veneers)	-	0	Included in test charges for timber
Cl-5.2.1(Glueing)	-	0	Included in test charges for timber
Cl -5.2.2(Thickness of Veneers)	-	0	Included in test charges for timber
Cl - 5.2.3.1(Joint in Veneers)	-	0	Included in test charges for timber
Cl - 5.2.3.2(Edge joints)	-	0	Included in test charges for timber
Cl - 5.2.3.4(Scarf joints)	-	0	Included in test charges for timber
Cl - 5.2.4(Grain Direction)	-	0	Included in test charges for timber
Cl-5.3(Treatment)	-	0	Included in test charges for timber
Cl-5.4(Moisture Content)	-	0	Included in test charges for timber
Cl-6.1(Dimensions (length and width))	-	375	25% discount on test charges
Cl-6.2(Thickness)	-	187.5	25% discount on test charges
Cl-6.3(Squareness and Edge Straightness)	-	375	25% discount on test charges
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	0	Included in test charges for timber
Cl-9.3(Moisture Content)	-	675	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	187.5	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength)	-	1325	Specimen preparation charges included
Cl-9.5.1.1(Water Resistance Test-Glue shear strength)	-	1325	Specimen preparation charges included
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	187.5	25 % discount on test charges
Cl-9.5.2(Water Resistance Test)	-	1800	Specimen preparation charges included
Cl-9.6(Tensile Strength)	-	2650	Tensile strength for both direction and specimen preparation charges included
Cl-9.7(Mycological Test)	-	5262.5	Total test charge for glue shear strength, adhesion of plies and mycological test.25% discount on test charges
Cl-9.8, Table-2(Static Bending Strength- Modulus of Elasticity (MOE))	-	1325	25% discount on test charges and specimen preparation charges included
Cl-9.8, Table-2(Static Bending Strength- Modulus of Rupture (MOR))	-	1325	25% discount on test charges and specimen preparation charges included
Cl-9.9, Table-3(Wet Bending Strength- Modulus of Elasticity (MOE))	-	1325	25% discount on test charges and specimen preparation charges included
Cl-9.9, Table-3(Wet Bending Strength- Modulus of Rupture (MOR))	-	1325	25% discount on test charges and specimen preparation charges included
Cl-9.10(Retention of Preservative)	-	2750	25% discount on test charges
Cl-9.11(Formaldehyde Content Test)	-	2250	25% discount on test charges
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	3750	25% discount on test charges
Cl-9.4.2(Adhesion of Plies)	-	0	Included in test charges for timber
5.1.1(Defects in veneers)	-	0	Included in test charges for timber
Cl - 5.2.3.3(End joints)	-	0	Included in test charges for timber
Cl-4.1(Timber)	-	1350	-
Cl-4.2(Adhesive)	-	0	-
Cl-5.1(Veneers)	-	0	-
Cl-5.2.1(Glueing)	-	0	-
Cl -5.2.2(Thickness of Veneers)	-	0	-
Cl - 5.2.3.1(Joint in Veneers)	-	0	-
Cl - 5.2.3.2(Edge joints)	-	0	-
Cl - 5.2.3.4(Scarf joints)	-	0	-
Cl - 5.2.4(Grain Direction)	-	0	-
Cl-5.3(Treatment)	-	0	-
Cl-5.4(Moisture Content)	-	0	-
Cl-6.1(Dimensions (length and width))	-	375	-
Cl-6.2(Thickness)	-	187.5	-
Cl-6.3(Squareness and Edge Straightness)	-	375	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	0	-
Cl-9.3(Moisture Content)	-	675	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	187.5	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength)	-	1325	-
Cl-9.5.1.1(Water Resistance Test-Glue shear strength)	-	1325	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	187.5	-
Cl-9.5.2(Water Resistance Test)	-	1800	-
Cl-9.6(Tensile Strength)	-	2650	-
Cl-9.7(Mycological Test)	-	5262.5	-
Cl-9.8, Table-2(Static Bending Strength- Modulus of Elasticity (MOE))	-	1325	-
Cl-9.8, Table-2(Static Bending Strength- Modulus of Rupture (MOR))	-	1325	-
Cl-9.9, Table-3(Wet Bending Strength- Modulus of Elasticity (MOE))	-	1325	-
Cl-9.9, Table-3(Wet Bending Strength- Modulus of Rupture (MOR))	-	1325	-
Cl-9.10(Retention of Preservative)	-	2750	-
Cl-9.11(Formaldehyde Content Test)	-	2250	-
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	3750	-
Cl-9.4.2(Adhesion of Plies)	-	0	-
5.1.1(Defects in veneers)	-	0	-
Cl - 5.2.3.3(End joints)	-	0	-

Complete

31 Dec, 2026

-
Included w.e.f. 13.02.2025

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

22759 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	225	25% discount on test charges
Cl-5.2, Table- 1 (i)(Blister)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (ii)(Checks)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (iv)(Dote)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (vi)(Joints)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (xi)(Patches)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (xii)(Splits)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	Included in classification by appearance
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	Included in classification by appearance
Cl-6.1(Timber)	-	0	Included in classification by appearance
Cl-6.2(Adhesive)	-	0	Included in classification by appearance
Cl-7.2.1(Thickness of veneers)	-	0	Included in classification by appearance
Cl-7.2.3(Grain Direction)	-	0	Included in classification by appearance
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	Included in classification by appearance
Cl-7.2.5.2(Splits)	-	0	Included in classification by appearance
Cl-7.2.5.3(Overlap)	-	0	Included in classification by appearance
Cl-8.1(Dimensions (length and width))	-	375	25% discount on test charges
Cl-8.2(Thickness of the plywood boards)	-	187.5	25% discount on test charges
Cl-8.3(Squareness and Edge Straightness)	-	375	25% discount on test charges
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	2400	Specimen Preparation charges included and 25 % discount on test charges
Cl-11.3.2(Mycological Test)	-	3750	25% discount on test charges
Cl-11.4(Moisture Content)	-	675	25% discount on test charges
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity (MOE)-)	-	2650	Specimen Preparation charges included and 25 % discount on test charges
Cl-11.5, Table 4(Static Bending Strength - Modulus of Rupture (MOR)-)	-	2650	Specimen Preparation charges included and 25 % discount on test charges
Cl-11.6(Formaldehyde Content Test)	-	2250	25% discount on test charges
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	3750	25% discount on test charges
Cl-9(WORKMANSHIP AND FINISH)	-	0	Included in classification by appearance
Cl-7.2.4(Scarf Joints)	-	0	Included in classification by appearance
Cl-5.1(Classification by appearance)	-	225	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	0	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions (length and width))	-	375	-
Cl-8.2(Thickness of the plywood boards)	-	187.5	-
Cl-8.3(Squareness and Edge Straightness)	-	375	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	2400	-
Cl-11.3.2(Mycological Test)	-	3750	-
Cl-11.4(Moisture Content)	-	375	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity (MOE)-)	-	2650	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Rupture (MOR)-)	-	2650	-
Cl-11.6(Formaldehyde Content Test)	-	2250	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	3750	-
Cl-9(WORKMANSHIP AND FINISH)	-	0	-
Cl-7.2.4(Scarf Joints)	-	0	-

Complete

31 Dec, 2026

-
Included w.e.f. 13.02.2025

IS 848 (2006)

Synthetic resin adhesives for plywood (Phenolic And Aminoplastic) - Specification (Second Revision)

3450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 Table (i)(BWP (BOiling WaterProof))	-	1500	with specimen preparation charge
4 Table (i)(BWR (Boiling Water Resistant))	-	1500	with specimen preparation charge
4 Table (i)(MR (Moisture Ressistant))	-	1500	with specimen preparation charge
7.4(Acidity and Alkalinity ( pH))	-	350	-

Complete

31 Dec, 2026

-
Included w.e.f. 08.12.2023

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

20168.75 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(DIMENSIONS-PIPE-Nominal Diameter)	-	500	All Dimension
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	Visual Appearance
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	Opacity
10.3(Effect on Water Test)	-	3000	Effect on water
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	900	Reversion(Including Specimen Preparation charges)
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	VST
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	Density
10.7(Sulphated Ash Content)	-	850	Sulphated Ash Content
10.1(Colour)	-	0	The amount is included in Visual appearance (10.1.1)
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	5000	Type Test
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	Acceptance Test
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	5000	Type Test
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	Acceptance Test
11.2(Resistance to External Blows at 0°C)	-	1300	Resistance to External Blows at 0°C(Including Specimen preparation charges)

Complete

31 Dec, 2026

-
Size: 20 to 200 mm

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

24425 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2(DIMENSIONS & TOLERANCES )	-	750	Length, width, thickness, edge straightness and squareness
10.1.1(MOISTURE CONTENT)	-	900	Moisture content
10.1.2, 10.1.2.1 (Table-1)(GLUE ADHESION IN DRY STATE)	-	1600	Including specimen preparation charges
10.1.3, 10.1.3.1.1 (Table-1)(RESISTANCE TO WATER TEST)	-	800	RESISTANCE TO WATER TEST)
10.1.5(MYCOLOGICAL TEST )	-	5000	(MYCOLOGICAL TEST )
10.1.6(TENSILE STRENGTH)	-	1600	Including specimen preparation charges
10.1.7 (Table-2)(STATIC BENDING STRENGTH)	-	1600	Including specimen preparation charges
10.1.7 (Table-2)(STATIC BENDING STRENGTH)	-	1600	Including specimen preparation charges
10.1.8 (Table-3)(WET BENDING STRENGTH)	-	1600	Including specimen preparation charges
10.1.8 (Table-3)(WET BENDING STRENGTH)	-	1600	Including specimen preparation charges
10.1.9(RETENTION OF PRESERVATIVE)	-	1100	Including specimen preparation charges

Complete

31 Dec, 2026

-
Thickness 3mm to 19mm

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	500	For all dimension
2.2.3(socket length)	-	0	Included in laying length
6.4 PART-1(Short term hydraulic test)	-	850	Hydrostatic pressure test

Complete

31 Dec, 2026

-
16-200 mm Sub-contracting: Effect on water (cl.6.3) to CIPET, Chennai, 25% discount (except for preparation/conditioning of samples) to BIS

IS 7834 : Part 4 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(90 ̊ Elbow Laying Length)	-	500	For all dimension
2.2.3( inside diameter of the socket)	-	0	Included in laying length
2.2.3(Socket length)	-	0	Included in laying length

Complete

31 Dec, 2026

-
16-200 mm Sub-contracting: Effect on water (cl.6.3) to CIPET, Chennai, 25% discount (except for preparation/conditioning of samples) to BIS

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	500	For all dimenions
2.2.3( inside diameter of the socket)	-	0	Included in laying length
2.2.3(Socket length)	-	0	Included in laying length

Complete

31 Dec, 2026

-
16-200 mm Sub-contracting: Effect on water (cl.6.3) to CIPET, Chennai, 25% discount (except for preparation/conditioning of samples) to BIS

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.2, Table 1(Socket Laying Length)	-	500		For all dimension
2.2.3( inside diameter of the socket)	-	0		Included in laying length

Complete

31 Dec, 2026

-
16-200 mm Sub-contracting: Effect on water (cl.6.3) to CIPET, Chennai, 25% discount (except for preparation/conditioning of samples) to BIS

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(Union Laying Length)	-	500	For all dimension
2.2.3( inside diameter of the socket)	-	0	Included in Laying length
2.2.3(Socket length)	-	0	Included in Laying length

Complete

31 Dec, 2026

-
16-200 mm Sub-contracting: Effect on water (cl.6.3) to CIPET, Chennai, 25% discount (except for preparation/conditioning of samples) to BIS

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.2(diameter of the socket of cap)	-	500		For all dimension
2.2.2(diameter of the socket of cap)	-	0		Included in Diameter of socket cap

Complete

31 Dec, 2026

-
-

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

32444 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(QUICK COUPLED PIPES)	-	19175	QUICK COUPLED PIPES(Part 1Cl4.2,5.0,6.1,7.1,7.2,7.3,7.4,7.5,7.6)
4(QUICK COUPLED FITTINGS)	-	6950	QUICK COUPLED FITTINGS-Density, MFI,CBC & CBD for male & female coupler)
4.1 .3(Workmanship and Appearance)	-	300	Workmanship and Appearance
4.1.4(b)(Holding Attachments for Coupler Parts)	-	850	Holding Attachments for Coupler Parts
4.1.5(Rubber Ring)	-	7150	Rubber Ring
6.1.1, 6.1.1.1(Leakage Test)	-	850	Leakage Test
6.1.2, 6.1.2.1( Hydraulic Proof Test)	-	850	Hydraulic Proof Test
6.1.3.1.1(Weldability Test)	-	6400	Weldability Test

Complete

31 Dec, 2026

-
-

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	1600	CBC & CBD
5.1 table -1(DIMENSIONS OF PIPES)	-	500	DIMENSIONS OF PIPES
6.1(VISUAL APPEARANCE)	-	300	VISUAL APPEARANCE
7.1 Table -2(Hydraulic Characteristics)	-	6400	Hydraulic Characteristics(48 hrs & 165hrs)
7.2(Reversion Test)	-	1000	Reversion Test(Including specimen Preparation)
7.3(Tensile Test)	-	1350	Tensile Test(Including specimen Preparation)
7.4table-2(Fusion Compatibility Test)	-	6400	Fusion Compatibility Test(48hrs & 165hrs)
7.5(Density)	-	500	Density
7.6(Melt now Rate (MFR))	-	1100	MFI

Complete

31 Dec, 2026

-
40-200 mm, 25% discount (except for preparation/conditioning of samples) to BIS

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

7387.5 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.a (Potyethylene - higher olefins constituent )	-	3950	Identification, Toluene extract. Volatile content, MFI
4.1.c.i (Density)	-	1100	Density
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	1600	CBC & CBD
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	550	Visual & dimension
7.2(Reversion Test)	-	5000	Hydraulic characteristic(1hr & 100hrs) & reversion
7.3(Elongation at Break)	-	1400	Elongation at Break(Including Specimen Preparation)
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1100	SusceptibiIity to Environmental Stress Cracking

Complete

31 Dec, 2026

-
12-32 mm, 25% discount (except for preparation/conditioning of samples) to BIS

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

1443.75 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.2.2, and Fig. 2.(B)	-	500	For completer dimensions
10.7 of IS 4985(Sulphated Ash content, Annex-B of IS 4985)	-	950	For sulphated ash content
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (First Extraction))	-	3000	For complete effect on water
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (Third Extraction))	-	0	Rs. 3000 for complete effect on water test
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-10)(Effect on water:Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	Rs. 3000 for complete effect on water test
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Cadmium (all three extracts))	-	0	Rs. 3000 for complete effect on water test
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Mercury (all three extracts))	-	0	Rs. 3000 for complete effect on water test
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-10)(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction))	-	0	Rs. 3000 for complete effect on water test
3.2.1, Table-1, Fig-1(Nominal size)	-	0	Rs.500 for complete dimensions
3.2.1, Table-1, Fig-1(B)	-	500	Rs.500 for complete dimensions
3.2.1, Table-1, Fig-1(Minimum wall thickness for working pressure)	-	0	Rs.500 for complete dimensions
3.2.1, Table-1, Fig-1(Plumbing)	-	0	Rs.500 for complete dimensions
Clause 3.2.2, and Fig. 2(Nominal size)	-	0	Rs.500 for complete dimensions
Clause 3.2.2, and Fig. 2.(Minimum wall thickness for working pressure)	-	0	Rs.500 for complete dimensions
3.2.2, and Fig. 2(Dimensions of Socket for Elastomeric Sealing Ring Joint)	-	0	Rs.500 for complete dimensions
3.1(General)	-	0	Rs.500 for complete dimensions

Complete

31 Dec, 2026

-
20-200mm, 25% discount (except for preparation/conditioning of samples) to BIS

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

1443.75 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 Table-1 Fig.1(Dimension of Socket length)	-	500	Dimension of Socket length
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	575	Opacity test
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	850	Hydrostatic Pressure test
4(Size of fitting)	-	0	Included in dimension test charges
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	0	Included in dimension test charges
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	0	Included in dimension test charges
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	0	Included in dimension test charges
3.2.3(socket, measurements)	-	0	Included in dimension test charges
6.3(Effect on water test)	-	3000	Test charges for complete effect on water test
3(Material)	-	1100	For K value test of material
3.1(Material)	-	3000	FOR VCM content analysis
8(Marking)	-	0	Included in dimensions

Complete

31 Dec, 2026

-
20-200mm, 25% discount (except for preparation/conditioning of samples) to BIS

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

11425 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Maximum and minimum outside diameter of socket)	-	1000	Maximum and minimum outside diameter of socket
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	300	Visual
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1000	Bending Test
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	1100	Compression Test
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1100	Impact Test
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1000	Collapse Test
10(Resistance to Heat -Ball presure test)	-	700	Resistance to Heat
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	700	Resistance to burning
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	6800	Electrical Characteristics

Complete

31 Dec, 2026

-
Included w.e.f. 04/09/2018; Size: 16-25 mm. 25% discount to BIS (except for preparation/conditioning of samples)

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

13587.5 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Dispersion Test)	-	1600	MFI & Density(Cl. No. 4.2.1 &4.2.2)
4.2.3(Carbon Black Content )	-	1550	CBC & CBD
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	2850	All Dimensions
6.1(Finish)	-	300	Visual
7.1.1(Resistance to Deformation)	-	700	Resistance to Deformation
7.2(Resistance to Impact)	-	1100	Resistance to Impact
7.3(Test for Top Load Resistance)	-	900	Test for Top Load Resistance
7.4(Tensile Strength)	-	1400	Tensile Strength(Including specimen preparation)
7.5(Flexural Modulus)	-	1600	Flexural Modulus(Including specimen preparation)
7.6(overall Migration)	-	2300	overall Migration(Including specimen preparation)

Complete

31 Dec, 2026

-
200-7500, 25% discount (except for preparation/conditioning of samples) to BIS

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
cl 2.2.2(Dimensions)	-	2625		Dimension of socket, opacity, stress relief , Hydraulic test
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	3000		Effect on water

Complete

31 Dec, 2026

-
16-200 mm Sub-contracting: Effect on water (cl.6.3) to CIPET, Chennai, 25% discount (except for preparation/conditioning of samples) to BIS

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	250	Thickness
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	250	Dimension
Cl. 6.1(Stress Relief Test- Appendix A)	-	700	stress relief
Cl. 6.2(Opacity- Appendix B)	-	575	opacity
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	3000	Effect on water
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	850	Hydrostatic

Complete

31 Dec, 2026

-
16-200 mm Sub-contracting: Effect on water (cl.6.3) to CIPET, Chennai, 25% discount (except for preparation/conditioning of samples) to BIS

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

37800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Polyethylene Resin)	-	4525	MFI, Density, OIT, Volatile matter, Water Content
5.3 (a)(Carbon Black Master Batch)	-	1875	CBC, Ash Content
6.2.1(6.1.1 Identification Stripes)	-	500	Color & Identification if strip
7.4 table -3 & 4(6.1 Dimensions)	-	800	MOD, Ovality, thickness& visual Appearance
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400	Hydraulic Characteristic(100hrs,48hrs,165hrs & 1000hrs)
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	Internal Pressure Creep Rupture Test of Pipe Joints(48hrs)
8.2(Longitudinal Reversion Test)	-	900	Longitudinal Reversion Test(Including specimen Preparation)
8.3(Carbon black)	-	1625	CBC & CBD
8.4( Melt Flow Rate)	-	1100	MFI
8.5 (Oxidation Induction Time)	-	2200	OIT
8.6(Overall migration)	-	2000	Overall migration(Including Specimen Preparation)
8.7(Density)	-	500	Density
8.8(Tensile Strength for Butt-fusion)	-	1600	Tensile Strength for Butt-fusion(Including Specimen preparation)
8.9 table-6(Elongation at Break)	-	1600	Elongation at Break(Including Specimen preparation)
8.10(Slow Crack Growth Rate)	-	6000	Slow Crack Growth Rate(Including Specimen preparation)

Complete

31 Dec, 2026

-
Current version(2016) included w.e.f. 04/09/2018; Size: 16-200 mm.

IS 4148 (1989)

Surgical rubber gloves - Specification (First Revision)

12175 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Dimensions Fig 1 and Table 1)	-	500	Dimensions Fig 1 and Table 1
4.3(Thickness)	-	250	Thickness
4.4.1(Physical Properties)	-	1350	Tensile test (Including specimen preparation)
4.4.2(After accelerated aging at 70 + 1OC for 240 h )	-	7350	After accelerated aging at 70 + 1OC for 240 h(Including specimen preparation)
4.4.3(After heat ageing in autoclave)	-	2350	After heat ageing in autoclave(Including specimen preparation)
4.4.4(Tension Set)	-	1500	Tension Set
4.5(pH of Aqueous Extract )	-	350	pH of Aqueous Extract

Complete

31 Dec, 2026

-
Included w.e.f. 04/09/2018; Size: 5-1/2 to 9-1/2. 25% discount to BIS (except for preparation/conditioning of samples)

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

11077 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.3(Dimensional Requirements - Thickness - Annexure E)	-	300	Thickness
7.3(Dimensional Requirements - Squareness - Annexure D)	-	1000	Length, Width, Squareness, Edge straightness
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	1000	Dimensional Changes caused by humidity
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	2600	Resistance to water(Including Specimen Preparation)
9.2.3(Adhesion of Plies - Annexure H)	-	250	Adhesion of Plies
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	2000	Mycological Test
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	1600	Modulus of rupture (Including Specimen Preparation)
9.2.6(Spot test - Annexure L)	-	3000	Spot test

Complete

31 Dec, 2026

-
Thickness: 3 mm to 19 mm

IS 710 (2010)

Marine plywood - Specification (Second Revision)

23750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(DIMENSIONS)	-	1250	Length, Width, thickness, edge straightness & sqaureness
7.1(WORKMANSHIP AND FINISH )	-	2050	WORKMANSHIP AND FINISH
9.1.1(MOISTURE CONTENT)	-	900	MOISTURE CONTENT
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	1600	Glue Adhesion in Dry State(including Specimen preparation )
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	250	Glue Adhesion in Dry State
9.1.3 , 9.1.3.1.1(Water resistance test)	-	3650	Water resistance test(including Specimen preparation )
9.1.4(Tensile strength)	-	3200	Tensile strength(including Specimen preparation )
9.1.5(Mycological test)	-	6850	Mycological test(including Specimen preparation )
9.1.6 (Table 3)(Static bending strength)	-	3200	Static bending strength dry state(including Specimen preparation )
9.1.7 (Table 4)(Wet bending strength)	-	3200	Wet bending strength(including Specimen preparation )
9.1.8(Retention of preservative)	-	3500	Retention of preservative(including Specimen preparation )

Complete

31 Dec, 2026

-
Included w.e.f. 04/09/2018 Thickness: 12 mm to 19 mm

IS 303 (1989)

Plywood for General Purposes -

13287.5 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Length - Cl. 8)	-	800	Visual Appearance, length & width
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	250	Thickness
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	500	Squareness & edge Straightness
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	2600	Water resistance test (Including Specimen preparation)
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	5000	Mycological test
11.3(Moisture Content - Part 1 of IS 1734)	-	900	Moisture Content
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	6400	Static Bending Strength - MOE& MOR (Along Face Grain & Across face grain

Complete

31 Dec, 2026

-
Thickness: 3 mm to 19 mm

Bureau of Indian Standards

The National Standards Body of India

CIPET KOCHI

( Formerly Known as Centre for Biopolymer Science & Technology ), 196 A, HIL Colony, Pathalam, Edayar Road,Eloor, Udyogamandal.P.O., Kochi, KOCHI, Ernakulam, Kerala, 683501

8129497182 cipetkochi@gmail.com

Scope List