BIS - LIMS (Laboratory Information Management System)

INSPECTION SYNDICATE OF INDIA PVT. LTD.

ERGO Brilliant Tower Level 10 Unit No. 1002, GP Block Sector- V, Salt Lake, Kolkata, Kolkata, West Bengal, 700091

9051093322 isoipl.ho@gmail.com

Scope List

Reset

7 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

8800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Tapes – Width IS 6192 and IS 11197)	-	200	NA
4.2(Tapes – Linear Density )	-	400	NA
4.2(Construction)	-	0	NA
4.3.1(The two rows of stitches shall be separated from each other)	-	100	NA
4.3.1( The outer stitch)	-	100	NA
4.3.1(stitches/dm)	-	100	NA
4.3.2(Mouth)	-	100	NA
4.4(Mass of the loose liner )	-	100	NA
4.4(Width of the loose liner)	-	100	NA
4.4(Length of the line)	-	100	NA
4.4(Bottom seam of the loose liner)	-	100	NA
5.2 and Table 1 ii a(Dimensions Inside Length)	-	150	NA
5.2 and Table 1 ii b(Dimensions Inside Width)	-	150	NA
5.2 and Table 1 iii(Ends per dm )	-	200	NA
5.2 and Table 1 iv(Picks per dm )	-	200	NA
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	200	NA
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	200	NA
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	500	NA
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	500	NA
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	500	NA
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	500	NA
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	500	NA
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	3000	NA
5.2 and Table 1 x(Ash content )	-	800	NA
4.3.1(Bottom Seam)	-	0	NA

Complete

IS 9755 (2021)

Textiles - High Density Polyethylene (HDPE) / Polypropylene (pp) Woven Sacks for Packing Fertilizers

12300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2("Fabric a) Width of Tape")	-	200	NA
4.2("Fabric b) Linear Density")	-	400	NA
4.2("Fabric c) Mesh")	-	0	NA
4.4.1(Thickness of Linear)	-	200	NA
4.4.3(Bottom Seam of Loose Liner)	-	100	NA
4.5(Laminated Fabric)	-	0	NA
4.6.1(Distance between the Two Row of Stitches)	-	100	NA
4.6.1(Distance of outer stitch from the edge of the bag)	-	100	NA
4.6.1(Depth of the Stitch( Double fold))	-	100	NA
4.6.1(No.of Stitches/dm)	-	100	NA
4.6.2(Breaking Load of the stitching material Non UV Stabilized sack)	-	500	NA
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension b) Inside Width ")	-	150	NA
"Table 1 of Cl. No.5.1 Sl. No. ii"(Ends/dm ( Type 1 & Type 2))	-	200	NA
"Table 1 of Cl. No.5.1 Sl. No. iii"(Picks /dm ( Type 1 & Type 2))	-	200	NA
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric a) Unlaminated Sack( Type 1 & Type 2)")	-	400	NA
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric b) Laminated Sack( Type 1 & Type 2)")	-	400	NA
"Table 1 of Cl. No.5.3 Sl. No. v"(Mass of Sack( Type 1 & Type 2))	-	200	NA
"Table 1 of Cl. No.5.4 Sl. No. vi"(Avg. Breaking Strength Of fabric (Ravelled strip method)( 325mm X 25 mm))	-	1500	NA
"Table 1 of Cl. No.5.4 Sl. No. vii"(Breaking Strength of Bottom Seam (Ravelled strip method))	-	500	NA
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric a)Length(Type 1 & Type 2)")	-	500	NA
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric b) Width(Type 1 & Type 2)")	-	500	NA
Cl. No.5.5("Ash Content a) For UV Stabilized Sack")	-	800	NA
Cl. No.5.5("Ash Content b) For Non- UV Stabilized Sack")	-	0	NA
"Table 1 of Cl. No.5.6 Sl. No. x"(Drop Impact Strength)	-	2000	NA
Cl. No.5.7(UV Resistance)	-	3000	NA
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension a) Inside Length Type 1 & Type 2 ")	-	150	NA
4.5(Mass of The Lamination)	-	0	-
4.5(Lamination Over Hang of the fabric after trimming)	-	0	-
4.6.2(Breaking Load for UV Stabilized sack)	-	0	-

Complete

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

HDPE/PP Woven sacks for packing 25kg polymer materials

11600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Mass of Bale)	-	0	ok
5.2 Table 1(Dimensions)	-	200	ok
5.2 Table 1(Dimensions)	-	200	ok
5.2 Table 1(Dimensions)	-	200	ok
5.2 Table 1(Dimensions)	-	200	ok
5.2 Table 1(Ends per dm)	-	200	ok
5.2 Table 1(Picks per dm)	-	200	ok
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	200	ok
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	500	ok
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	500	ok
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	500	ok
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	500	ok
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	500	ok
5.2 Table 1(Drop impact strength)	-	2000	ok
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	800	ok
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	0	ok
4.6(Capacity)	-	100	ok
4.3.1(Bottom Seam)	-	1000	ok
4.3(Sacks)	-	100	ok
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	3000	ok
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	0	ok
4.2(Linear Density)	-	500	ok
4.2(Width of tape)	-	200	ok

Complete

Included w.e.t. 09.09.2024

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

HDPE/PP woven sacks for packing 50kg cement

13800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	200	OK
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	200	OK
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	200	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	200	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	200	OK
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	200	OK
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	200	OK
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	100	OK
4.1(Raw Material )	-	800	OK
4.2 (Fabric)	-	0	OK
4.2 (Linear Density, 900 denier)	-	500	OK
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	OK
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	300	OK
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	OK
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	200	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
4.3(Sacks)	-	100	OK
4.4(Seam )	-	500	OK
4.4(Seam )	-	0	OK
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	OK
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	OK
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	OK
4.4(to a depth of minimum 25 mm, so that so that)	-	0	OK
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	OK
4.4(The number of stitches/dm shall be 14 ± 2.)	-	200	OK
4.4(Seam)	-	0	OK
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	500	OK
4.4(Seam)	-	0	OK
4.4(Seam)	-	0	OK
4.4(Seam)	-	0	OK
4.5(Lamination )	-	0	OK
4.5(Lamination )	-	0	OK
4.5(Lamination )	-	0	OK
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	100	OK
4.7(Valve for Filling of Sacks)	-	100	OK
4.7(There shall be a double fold at the top seam and)	-	0	OK
4.7(and then stitching shall be done through six layers.)	-	0	OK
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	OK
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	200	OK
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	OK
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	OK
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	500	OK
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	500	OK
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	500	OK
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	500	OK
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	500	OK
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	500	OK
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	2000	OK
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	OK
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	800	OK
5/5.6 (UV Resistance, )	-	0	OK
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	3000	OK
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	OK
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	OK
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	OK
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	OK
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	OK
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	OK
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	OK
4.1(Raw Material )	-	0	OK
4.2 (Fabric)	-	0	OK
4.2 (Linear Density, 900 denier)	-	0	OK
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	OK
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	OK
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	OK
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
4.3(Sacks)	-	0	OK
4.4(Seam )	-	0	OK
4.4(Seam )	-	0	OK
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	OK
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	OK
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	OK
4.4(to a depth of minimum 25 mm, so that so that)	-	0	OK
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	OK
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	OK
4.4(Seam)	-	0	OK
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	OK
4.4(Seam)	-	0	OK
4.4(Seam)	-	0	OK
4.4(Seam)	-	0	OK
4.5(Lamination )	-	0	OK
4.5(Lamination )	-	0	OK
4.5(Lamination )	-	0	OK
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	OK
4.7(Valve for Filling of Sacks)	-	0	OK
4.7(There shall be a double fold at the top seam and)	-	0	OK
4.7(and then stitching shall be done through six layers.)	-	0	OK
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	OK
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	OK
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	OK
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	OK
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	OK
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	OK
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	OK
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	OK
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	OK
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	OK
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	OK
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	OK
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	OK
5/5.6 (UV Resistance, )	-	0	OK
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	OK
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	OK
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	OK
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	OK
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	OK
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	OK
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	OK
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	OK
4.1(Raw Material )	-	0	OK
4.2 (Fabric)	-	0	OK
4.2 (Linear Density, 900 denier)	-	0	OK
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	OK
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	OK
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	OK
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
4.3(Sacks)	-	0	OK
4.4(Seam )	-	0	OK
4.4(Seam )	-	0	OK
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	OK
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	OK
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	OK
4.4(to a depth of minimum 25 mm, so that so that)	-	0	OK
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	OK
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	OK
4.4(Seam)	-	0	OK
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	OK
4.4(Seam)	-	0	OK
4.4(Seam)	-	0	OK
4.4(Seam)	-	0	OK
4.5(Lamination )	-	0	OK
4.5(Lamination )	-	0	OK
4.5(Lamination )	-	0	OK
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	OK
4.7(Valve for Filling of Sacks)	-	0	OK
4.7(There shall be a double fold at the top seam and)	-	0	OK
4.7(and then stitching shall be done through six layers.)	-	0	OK
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	OK
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	OK
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	OK
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	OK
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	OK
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	OK
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	OK
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	OK
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	OK
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	OK
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	OK
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	OK
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	OK
5/5.6 (UV Resistance, )	-	0	OK
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	OK
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	OK
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	OK
Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2)	-	0	OK
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	0	OK
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm)	-	0	OK
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm)	-	0	OK
Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm)	-	0	OK
Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm)	-	0	OK
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	OK
4.1(Raw Material )	-	0	OK
4.2 (Fabric)	-	0	OK
4.2 (Linear Density, 900 denier)	-	0	OK
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	OK
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	OK
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	OK
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
4.3(Sacks)	-	0	OK
4.4(Seam )	-	0	OK
4.4(Seam )	-	0	OK
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	OK
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	OK
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	OK
4.4(to a depth of minimum 25 mm, so that so that)	-	0	OK
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	OK
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	OK
4.4(Seam)	-	0	OK
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	OK
4.4(Seam)	-	0	OK
4.4(Seam)	-	0	OK
4.4(Seam)	-	0	OK
4.5(Lamination )	-	0	OK
4.5(Lamination )	-	0	OK
4.5(Lamination )	-	0	OK
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	OK
4.7(Valve for Filling of Sacks)	-	0	OK
4.7(There shall be a double fold at the top seam and)	-	0	OK
4.7(and then stitching shall be done through six layers.)	-	0	OK
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	OK
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	OK
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	OK
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	OK
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	OK
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	OK
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	OK
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	OK
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	OK
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	OK
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	OK
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	OK
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	OK
5/5.6 (UV Resistance, )	-	0	OK
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	OK
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	OK
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	OK
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	OK
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	OK
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	OK
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	OK
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	OK
4.1(Raw Material )	-	0	OK
4.2 (Fabric)	-	0	OK
4.2 (Linear Density, 900 denier)	-	0	OK
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	OK
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	OK
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	OK
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
4.3(Sacks)	-	0	OK
4.4(Seam )	-	0	OK
4.4(Seam )	-	0	OK
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	OK
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	OK
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	OK
4.4(to a depth of minimum 25 mm, so that so that)	-	0	OK
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	OK
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	OK
4.4(Seam)	-	0	OK
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	OK
4.4(Seam)	-	0	OK
4.4(Seam)	-	0	OK
4.4(Seam)	-	0	OK
4.5(Lamination )	-	0	OK
4.5(Lamination )	-	0	OK
4.5(Lamination )	-	0	OK
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	OK
4.7(Valve for Filling of Sacks)	-	0	OK
4.7(There shall be a double fold at the top seam and)	-	0	OK
4.7(and then stitching shall be done through six layers.)	-	0	OK
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	OK
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	OK
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	OK
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	OK
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	OK
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	OK
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	OK
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	OK
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	OK
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	OK
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	OK
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	OK
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	OK
5/5.6 (UV Resistance, )	-	0	OK
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	OK
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	OK
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	OK
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	OK
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	OK
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	OK
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	OK
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	OK
4.1(Raw Material )	-	0	OK
4.2 (Fabric)	-	0	OK
4.2 (Linear Density, 900 denier)	-	0	OK
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	OK
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	OK
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	OK
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
4.3(Sacks)	-	0	OK
4.4(Seam )	-	0	OK
4.4(Seam )	-	0	OK
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	OK
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	OK
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	OK
4.4(to a depth of minimum 25 mm, so that so that)	-	0	OK
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	OK
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	OK
4.4(Seam)	-	0	OK
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	OK
4.4(Seam)	-	0	OK
4.4(Seam)	-	0	OK
4.4(Seam)	-	0	OK
4.5(Lamination )	-	0	OK
4.5(Lamination )	-	0	OK
4.5(Lamination )	-	0	OK
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	OK
4.7(Valve for Filling of Sacks)	-	0	OK
4.7(There shall be a double fold at the top seam and)	-	0	OK
4.7(and then stitching shall be done through six layers.)	-	0	OK
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	OK
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	OK
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	OK
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	0
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	OK
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	OK
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	OK
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	OK
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	OK
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	OK
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	OK
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	OK
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	OK
5/5.6 (UV Resistance, )	-	0	OK
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	OK
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	OK
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	OK
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	OK
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	OK
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	OK
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	OK
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	OK
4.1(Raw Material )	-	0	OK
4.2 (Fabric)	-	0	OK
4.2 (Linear Density, 900 denier)	-	0	OK
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	OK
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	OK
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	OK
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
4.3(Sacks)	-	0	OK
4.4(Seam )	-	0	OK
4.4(Seam )	-	0	OK
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	OK
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	OK
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	OK
4.4(to a depth of minimum 25 mm, so that so that)	-	0	OK
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	OK
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	OK
4.4(Seam)	-	0	OK
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	OK
4.4(Seam)	-	0	OK
4.4(Seam)	-	0	OK
4.4(Seam)	-	0	OK
4.5(Lamination )	-	0	OK
4.5(Lamination )	-	0	OK
4.5(Lamination )	-	0	OK
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	OK
4.7(Valve for Filling of Sacks)	-	0	OK
4.7(There shall be a double fold at the top seam and)	-	0	OK
4.7(and then stitching shall be done through six layers.)	-	0	OK
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	OK
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	OK
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	OK
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	OK
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	OK
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	OK
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	OK
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	OK
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	OK
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	OK
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	OK
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	OK
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	OK
5/5.6 (UV Resistance, )	-	0	OK
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	OK
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	OK
Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2)	-	0	OK
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	0	OK
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm)	-	0	OK
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm)	-	0	OK
Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm)	-	0	OK
Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm)	-	0	OK
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	OK
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	OK
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	OK
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	OK
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	OK
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	OK
4.1(Raw Material )	-	0	OK
4.2 (Fabric)	-	0	OK
4.2 (Linear Density, 900 denier)	-	0	OK
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	OK
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	OK
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	OK
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
4.3(Sacks)	-	0	OK
4.4(Seam )	-	0	OK
4.4(Seam )	-	0	OK
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	OK
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	OK
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	OK
4.4(to a depth of minimum 25 mm, so that so that)	-	0	OK
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	OK
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	OK
4.4(Seam)	-	0	OK
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	OK
4.4(Seam)	-	0	OK
4.4(Seam)	-	0	OK
4.4(Seam)	-	0	OK
4.5(Lamination )	-	0	OK
4.5(Lamination )	-	0	OK
4.5(Lamination )	-	0	OK
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	OK
4.7(Valve for Filling of Sacks)	-	0	OK
4.7(There shall be a double fold at the top seam and)	-	0	OK
4.7(and then stitching shall be done through six layers.)	-	0	OK
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	OK
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	OK
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	OK
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	OK
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	OK
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	OK
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	OK
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	OK
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	OK
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	OK
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	OK
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	OK
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	OK
5/5.6 (UV Resistance, )	-	0	OK
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	OK
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	OK
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	OK
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	OK
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	OK
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	OK
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	OK
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	OK
4.1(Raw Material )	-	0	OK
4.2 (Fabric)	-	0	OK
4.2 (Linear Density, 900 denier)	-	0	OK
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	OK
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	OK
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	OK
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
4.3(Sacks)	-	0	OK
4.4(Seam )	-	0	OK
4.4(Seam )	-	0	OK
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	OK
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	OK
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	OK
4.4(to a depth of minimum 25 mm, so that so that)	-	0	OK
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	OK
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	OK
4.4(Seam)	-	0	OK
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	OK
4.4(Seam)	-	0	OK
4.4(Seam)	-	0	OK
4.4(Seam)	-	0	OK
4.5(Lamination )	-	0	OK
4.5(Lamination )	-	0	OK
4.5(Lamination )	-	0	OK
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	OK
4.7(Valve for Filling of Sacks)	-	0	OK
4.7(There shall be a double fold at the top seam and)	-	0	OK
4.7(and then stitching shall be done through six layers.)	-	0	OK
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	OK
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	OK
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	OK
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	OK
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	OK
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	OK
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	OK
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	OK
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	OK
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	OK
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	OK
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	OK
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	OK
5/5.6 (UV Resistance, )	-	0	OK
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	OK
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	OK
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	OK
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	OK
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	OK
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	OK
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	OK
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	OK
4.1(Raw Material )	-	0	OK
4.2 (Fabric)	-	0	OK
4.2 (Linear Density, 900 denier)	-	0	OK
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	OK
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	OK
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	OK
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
4.3(Sacks)	-	0	OK
4.4(Seam )	-	0	OK
4.4(Seam )	-	0	OK
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	OK
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	OK
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	OK
4.4(to a depth of minimum 25 mm, so that so that)	-	0	OK
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	OK
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	OK
4.4(Seam)	-	0	OK
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	OK
4.4(Seam)	-	0	OK
4.4(Seam)	-	0	OK
4.4(Seam)	-	0	OK
4.5(Lamination )	-	0	OK
4.5(Lamination )	-	0	OK
4.5(Lamination )	-	0	OK
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	OK
4.7(Valve for Filling of Sacks)	-	0	OK
4.7(There shall be a double fold at the top seam and)	-	0	OK
4.7(and then stitching shall be done through six layers.)	-	0	OK
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	OK
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	OK
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	OK
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	OK
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	OK
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	OK
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	OK
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	OK
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	OK
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	OK
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	OK
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	OK
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	OK
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	OK
5/5.6 (UV Resistance, )	-	0	OK
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	OK
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	OK
Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2)	-	0	OK
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	0	OK
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm)	-	0	OK
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm)	-	0	OK
Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm)	-	0	OK
Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm)	-	0	OK
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	ok
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	ok
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	ok
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	ok
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	ok
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	ok
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	ok
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	ok
4.1(Raw Material )	-	0	ok
4.2 (Fabric)	-	0	ok
4.2 (Linear Density, 900 denier)	-	0	ok
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	ok
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	ok
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	ok
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	ok
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	ok
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	ok
4.3(Sacks)	-	0	ok
4.4(Seam )	-	0	ok
4.4(Seam )	-	0	ok
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	ok
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	ok
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	ok
4.4(to a depth of minimum 25 mm, so that so that)	-	0	ok
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	ok
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	ok
4.4(Seam)	-	0	ok
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	ok
4.4(Seam)	-	0	ok
4.4(Seam)	-	0	ok
4.4(Seam)	-	0	ok
4.5(Lamination )	-	0	ok
4.5(Lamination )	-	0	ok
4.5(Lamination )	-	0	ok
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	ok
4.7(Valve for Filling of Sacks)	-	0	ok
4.7(There shall be a double fold at the top seam and)	-	0	ok
4.7(and then stitching shall be done through six layers.)	-	0	ok
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	ok
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	ok
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	ok
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	ok
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	ok
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	ok
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	ok
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	ok
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	ok
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	ok
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	ok
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	ok
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	ok
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	ok
5/5.6 (UV Resistance, )	-	0	ok
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	ok
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	ok
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	ok
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	ok
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	ok
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	ok
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	ok
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	ok
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	ok
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	ok
4.1(Raw Material )	-	0	ok
4.2 (Fabric)	-	0	ok
4.2 (Linear Density, 900 denier)	-	0	ok
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	ok
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	ok
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	ok
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	ok
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	ok
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	ok
4.3(Sacks)	-	0	ok
4.4(Seam )	-	0	ok
4.4(Seam )	-	0	ok
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	ok
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	ok
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	ok
4.4(to a depth of minimum 25 mm, so that so that)	-	0	ok
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	ok
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	ok
4.4(Seam)	-	0	ok
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	ok
4.4(Seam)	-	0	ok
4.4(Seam)	-	0	ok
4.4(Seam)	-	0	ok
4.5(Lamination )	-	0	ok
4.5(Lamination )	-	0	ok
4.5(Lamination )	-	0	ok
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	ok
4.7(Valve for Filling of Sacks)	-	0	ok
4.7(There shall be a double fold at the top seam and)	-	0	ok
4.7(and then stitching shall be done through six layers.)	-	0	ok
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	ok
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	ok
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	ok
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	ok
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	ok
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	ok
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	ok
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	ok
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	ok
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	ok
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	ok
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	ok
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	ok
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	ok
5/5.6 (UV Resistance, )	-	0	ok
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	ok
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	ok
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	ok
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	ok
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0	ok
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	ok
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	ok
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	ok
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	ok
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	ok
4.1(Raw Material )	-	0	ok
4.2 (Fabric)	-	0	ok
4.2 (Linear Density, 900 denier)	-	0	ok
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	ok
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	ok
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	ok
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	ok
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	ok
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	ok
4.3(Sacks)	-	0	ok
4.4(Seam )	-	0	ok
4.4(Seam )	-	0	ok
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	ok
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	ok
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	ok
4.4(to a depth of minimum 25 mm, so that so that)	-	0	ok
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	ok
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	ok
4.4(Seam)	-	0	ok
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0	ok
4.4(Seam)	-	0	ok
4.4(Seam)	-	0	ok
4.4(Seam)	-	0	ok
4.5(Lamination )	-	0	ok
4.5(Lamination )	-	0	ok
4.5(Lamination )	-	0	ok
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	ok
4.7(Valve for Filling of Sacks)	-	0	ok
4.7(There shall be a double fold at the top seam and)	-	0	ok
4.7(and then stitching shall be done through six layers.)	-	0	ok
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	ok
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	ok
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	ok
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0	ok
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	ok
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	ok
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0	ok
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	ok
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0	ok
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	ok
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	ok
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	ok
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0	ok
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	ok
5/5.6 (UV Resistance, )	-	0	ok
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	ok
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0	ok
Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2)	-	0	ok
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	0	ok
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm)	-	0	ok
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm)	-	0	ok
Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm)	-	0	ok
Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm)	-	0	ok
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	-	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	-	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	-	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	-	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	-	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	-	-
4.1(Raw Material )	-	-	-
4.2 (Fabric)	-	-	-
4.2 (Linear Density, 900 denier)	-	-	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	-	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	-	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	-	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	-	-
4.3(Sacks)	-	-	-
4.4(Seam )	-	-	-
4.4(Seam )	-	-	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	-	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	-	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	-	-
4.4(to a depth of minimum 25 mm, so that so that)	-	-	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	-	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	-	-
4.4(Seam)	-	-	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	-	-
4.4(Seam)	-	-	-
4.4(Seam)	-	-	-
4.4(Seam)	-	-	-
4.5(Lamination )	-	-	-
4.5(Lamination )	-	-	-
4.5(Lamination )	-	-	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	-	-
4.7(Valve for Filling of Sacks)	-	-	-
4.7(There shall be a double fold at the top seam and)	-	-	-
4.7(and then stitching shall be done through six layers.)	-	-	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	-	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	-	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	-	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	-	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	-	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	-	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	-	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	-	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	-	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	-	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	-	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	-	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	-	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	-	-
5/5.6 (UV Resistance, )	-	-	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	-	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	-	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	-	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	-	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	-	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	-	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	-	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	-	-
4.1(Raw Material )	-	-	-
4.2 (Fabric)	-	-	-
4.2 (Linear Density, 900 denier)	-	-	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	-	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	-	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	-	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	-	-
4.3(Sacks)	-	-	-
4.4(Seam )	-	-	-
4.4(Seam )	-	-	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	-	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	-	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	-	-
4.4(to a depth of minimum 25 mm, so that so that)	-	-	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	-	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	-	-
4.4(Seam)	-	-	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	-	-
4.4(Seam)	-	-	-
4.4(Seam)	-	-	-
4.4(Seam)	-	-	-
4.5(Lamination )	-	-	-
4.5(Lamination )	-	-	-
4.5(Lamination )	-	-	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	-	-
4.7(Valve for Filling of Sacks)	-	-	-
4.7(There shall be a double fold at the top seam and)	-	-	-
4.7(and then stitching shall be done through six layers.)	-	-	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	-	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	-	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	-	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	-	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	-	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	-	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	-	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	-	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	-	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	-	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	-	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	-	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	-	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	-	-
5/5.6 (UV Resistance, )	-	-	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	-	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	-	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	-	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	-	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	-	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	-	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	-	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	-	-
4.1(Raw Material )	-	-	-
4.2 (Fabric)	-	-	-
4.2 (Linear Density, 900 denier)	-	-	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	-	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	-	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	-	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	-	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	-	-
4.3(Sacks)	-	-	-
4.4(Seam )	-	-	-
4.4(Seam )	-	-	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	-	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	-	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	-	-
4.4(to a depth of minimum 25 mm, so that so that)	-	-	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	-	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	-	-
4.4(Seam)	-	-	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	-	-
4.4(Seam)	-	-	-
4.4(Seam)	-	-	-
4.4(Seam)	-	-	-
4.5(Lamination )	-	-	-
4.5(Lamination )	-	-	-
4.5(Lamination )	-	-	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	-	-
4.7(Valve for Filling of Sacks)	-	-	-
4.7(There shall be a double fold at the top seam and)	-	-	-
4.7(and then stitching shall be done through six layers.)	-	-	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	-	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	-	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	-	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	-	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	-	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	-	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	-	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	-	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	-	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	-	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	-	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	-	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	-	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	-	-
5/5.6 (UV Resistance, )	-	-	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	-	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	-	-
Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2)	-	-	-
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	-	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm)	-	-	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm)	-	-	-
Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm)	-	-	-
Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm)	-	-	-

Complete

Included w.e.t. 09.09.2024

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	400	NA
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	400	NA
3.3.1(Bottom seam (IS 10789))	-	400	NA
4.2 and Table 1 ii(Dimensions )	-	300	NA
5.2 and Table 1 iii(Ends per dm )	-	200	NA
5.2 and Table 1 iv(Picks per dm )	-	200	NA
4.2 and Table 1 v(Mass of sack )	-	200	NA
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1000	NA
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	500	NA
4.2 and Table 1 viii(Elongation at break of fabric )	-	1000	NA
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	3000	NA
4.2 and Table 1 x(Ash content )	-	800	NA

Complete

IS 16186 (2014)

Textiles - Light weight jute sacking bags for packing 50 kg foodgrains - Specification

4600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(i)The bags shall be made from single piece of 2/1 twill weave jute sacking of uniform construction with warp running along the length of the bag. )	-	100	NA
4.1(ii) The mass per square meter of sacking used in the fabric of the bag 504 g.)	-	400	NA
4.2.i)( Type of stitches Herakle )	-	100	NA
4.2.ii)( Jute twine for stitches Two strands of 3-ply )	-	100	NA
4.2.iii)( Stitches/dm 10 ± 1 )	-	100	NA
4.3.i)( Stitches/dm 10 ± 1 )	-	0	NA
4.3.ii)(Tex of jute twine )	-	0	NA
4.4(Fabric shall be hemmed with jute yarn of 310 tex )	-	400	NA
4.5(Freedom from defects)	-	0	NA
4.1 & 5.1, Table 1(Outside Length, cm )	-	150	NA
4.1 & 5.1, Table 1(Outside Width, cm )	-	150	NA
4.1 & 5.1, Table 1(Ends /dm-IS 9113 (Cl.8.4.2))	-	200	NA
4.1 & 5.1, Table 1(Picks/dm-IS 9113 (Cl.8.4.2))	-	200	NA
4.1 & 5.1, Table 1(Corrected Mass/Bag,g-IS 9113 (Cl.8.5.2))	-	200	NA
4.1 & 5.1, Table 1(Warpway -IS 9113 (Cl.8.6.2))	-	500	NA
4.1 & 5.1, Table 1(Weftway-IS 9113 (Cl.8.6.2))	-	500	NA
4.1 & 5.1, Table 1(Average Seam Strength in N-IS 9113 (Cl.8.7))	-	500	NA
4.1 & 5.1, Table 1(Moisture Regain, Percent-IS 9113 (Cl.8.2))	-	200	NA
4.1 & 5.1, Table 1(Oil content, Percent-IS 9113 (Cl.8.5.2))	-	800	NA

Complete

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Tapes – Width IS 6192 and IS 11197)	-	200	NA
4.2(Tapes – Linear Density )	-	400	NA
4.3.1( The two rows of stitches shall be separated from each other)	-	100	NA
4.3.1( The outer stitch)	-	100	NA
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	100	NA
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	100	NA
4.3.1(The number of stitches/dm)	-	100	NA
4.3.2(Mouth)	-	100	NA
5.2 and Table 1 ii a(Dimensions Inside Length)	-	150	NA
5.2 and Table 1 ii b(Dimensions Inside Width)	-	150	NA
5.2 and Table 1 iii(Ends per dm )	-	200	NA
5.2 and Table 1 iv(Picks per dm )	-	200	NA
5.1 and Table 1 v(Mass of sack )	-	200	NA
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	500	NA
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	500	NA
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	500	NA
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	500	NA
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	500	NA
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	3000	NA
5.2 and Table 1 x(Ash content )	-	800	NA

Complete

Bureau of Indian Standards

The National Standards Body of India

INSPECTION SYNDICATE OF INDIA PVT. LTD.

ERGO Brilliant Tower Level 10 Unit No. 1002, GP Block Sector- V, Salt Lake, Kolkata, Kolkata, West Bengal, 700091

9051093322 isoipl.ho@gmail.com

Scope List