BIS - LIMS (Laboratory Information Management System)

Sierra Aircon Pvt. Ltd.

C-470, Pioneer Indl. Park, P.O. Pathredi, (Bilaspur-Tauru Road), GURUGRAM, Gurugram, Haryana, 122413

9871557776 mail@sierraaircon.com

Scope List

Reset

4 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 1391 : Part 2 (2023)

Room Air Conditioners Specification Part 2 Split Air Conditioners Fourth Revision

Size

626000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Construction )("The air conditioner and its parts shall be constructed with the strength and rigidity adequate for normal conditions of handling, transport, and usage.")	-	0	-
8(RATING AND TEST CONDITIONS)	-	0	Test charges for various tests is charged against each test
8.1(Cooling Test)	-	0	Conditions followed while carrying out cooling capacity test.
8.1.2((Maximum Operating Test Conditions))	-	0	Conditions followed while carrying out Maximum operating test.
8.1.3((Freeze-Up Test Conditions))	-	0	Conditions followed while carrying out freeze-up test.
8.1.4((Enclosure Sweat Test Conditions))	-	0	Conditions followed while carrying out Enclosure Sweat Test Conditions.
8.2((Heating Test))	-	0	Conditions followed while carrying out Heating Test
8.2.1((Heating Capacity Test Conditions))	-	0	Covered under Heating test.
"8.2.2((Heating by Heat Pump Overload Rating Test Conditions (Maximum Heating Performance Test))")	-	0	Conditions followed while carrying out Heating by Heat Pump Overload Rating Test Conditions (Maximum heating performance test).
"8.3((Method of Measurement of Indian Seasonal Energy Efficiency Ratio (ISEER))")	-	0	Carried out along with cooling test
9((PERFORMANCE REQUIREMENTS))	-	0	-
9.1((Variations Allowed in Performance Test Conditions))	-	0	Applied various tests as applicable.
9.2((Safety))	-	0	Carried out as per A3 Refrigerant safety requirements
9.3((Power Factor Test))	-	0	Covered along with Cooling test.
9.4((Maximum Operating Conditions Test))	-	116000	-
9.5((Freeze-Up Tests))	-	116000	-
9.5.3((Air Blockage Test))	-	0	Covered under Freeze-up test.
9.5.4(( Drip Test))	-	0	Covered under Freeze-up test.
9.6((Enclosure Sweat Test))	-	58000	-
9.7((Power Consumption Test for Cooling))	-	0	Covered along with Cooling Capacity test.
9.8((Power Consumption Test for Heating by Heat Pump))	-	0	Covered along with Heating Capacity test.
9.9(( Cooling Capacity Test))	-	116000	Charges cover for Full load and Half load Capacity tests applicable to variable Speed unites. For Fixed speed unites INR 58000/- only as test chargers For unites, above 10500 Watts rated Capacity: Fixed Speed INR 65000/- Variable speed INR 130000/-
9.10((Heating Capacity Test))	-	58000	For Transient test mode, an additional INR 58000/- extra will be charged. For unites, above 10500 Watts rated Capacity INR 65000/- will be charged as test charges.
"9.11((Method of Measurement of Indian Seasonal Energy Efficiency Ratio (ISEER))")	-	0	Method followed while carrying out cooling capacity test.
9.12((Maximum Heating Performance Test))	-	116000	For unites, above 10500 Watts rated Capacity INR 130000/- will be charged as test charges.
9.13((Sound Pressure Test))	-	29000	For unites, above 10500 Watts rated Capacity INR 35000/- will be charged as test charges.
10((CALCULATIONS))	-	0	Followed while carrying out cooling capacity and heating capacity test.
11((INSTRUMENTS))	-	0	Used as per requirement and specifications.
12.1((Classification of Tests))	-	0	-
12.2.2(( Leakage Test))	-	0	mandatory carried out prior to cooling capacity test.
12.2.3((High Voltage Test))	-	5000	-
12.2.4(Leakage Current Test))	-	5000	For unites, above 10500 Watts rated Capacity INR 15000/- will be charged as test charges.
"12.2.5(Provisions for Earthing (Earth Resistance Test)")	-	5000	-
12.3.3(Safety Tests)	-	2000	Charges taken for protection against access to the live parts test.
12.4.1(Performance Test)	-	0	-
12.4.2(Pressure Test or Leakage Test)	-	0	mandatory carried out prior to cooling capacity test.
12.4.3(Leakage Current Test)	-	0	Already covered

Complete

31 Mar, 2025

IS 1391 : Part 1 (2023)

Room Air Conditioners Specification Part 1 Unitary Air Conditioners Fourth Revision

Size

578000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5((CONSTRUCTION ))	-	0	-
8(RATING AND TEST CONDITIONS)	-	0	Tests charges for various test is charged against each test.
8.1(Cooling Test)	-	0	Conditions followed while carrying out Cooling Capacity test
8.1.2((Maximum Operating Test Conditions))	-	0	Conditions followed while carrying out Maximum Operating Test .
8.1.3((Freeze-Up Test Conditions))	-	0	Conditions followed while carrying out Freeze-up test .
8.1.4((Enclosure Sweat Test Conditions))	-	0	Conditions followed while carrying out Enclosure Sweat Test.
8.1.5((Condensate Disposal Test Conditions))	-	0	Conditions followed while carrying out Condensate Disposal Test.
8.2((Heating Test))	-	0	Conditions followed while carrying out Heating Test.
8.2.1((Heating Capacity Test Conditions))	-	0	Covered under Heating test.
"8.2.2((Heating by Heat Pump Overload Rating Test Conditions (Maximum Heating Performance Test))")	-	0	Conditions followed while carrying out Heating by Heat Pump Overload rating Test (Maximum Heating Performance test)
"8.3((Method of Measurement of Indian Seasonal Energy Efficiency Ratio (ISEER))")	-	0	Carried out along with Cooling Capacity test.
9((PERFORMANCE REQUIREMENTS))	-	0	Requirements followed while carrying out various tests.
9.1(Variations Allowed in Performance Test Conditions)	-	0	Applied to various tests as applicable.
9.2(Safety)	-	0	-
9.3(Power Factor Test)	-	0	Covered along with Cooling Capacity test.
9.4(Maximum Operating Conditions Test)	-	116000	-
9.5(Freeze-Up Tests)	-	116000	-
9.6(Enclosure Sweat Test)	-	68000	-
9.7(Condensate Disposal Test)	-	0	Covered along with Enclosure Sweat Test.
9.8(Power Consumption Test for Cooling)	-	0	Covered along with Cooling Capacity Test.
9.9(Power Consumption Test for Heating by Heat Pump)	-	0	Covered along with Heating Capacity test.
9.10(Cooling Capacity Test)	-	58000	For Variable speed unit, INR-58000/- extra will be charged for additional Half Load Cooling Capacity Test.
9.11(Heating Capacity Test)	-	58000	For Heating Transient test (if required) an additional INR-58000/- extra will be charged.
"9.12(Method of Measurement of Indian Seasonal Energy Efficiency Ratio (ISEER)")	-	0	Method followed while carrying out Cooling Capacity Test.
9.13(Maximum Heating Performance Test)	-	116000	-
9.14(Sound Pressure Test)	-	29000	-
10(CALCULATIONS)	-	0	Followed while carrying out Cooling Capacity and Heating Capacity Test.
11(INSTRUMENTS)	-	0	Used as per test requirements and specifications.
12.1(Classification of Tests)	-	0	All production routine and type tests are covered.
12.2.2(Leakage Test)	-	0	Mandatory carried out prior to Cooling Capacity Test.
12.2.3(High Voltage Test)	-	5000	-
12.2.4(Leakage Current Test)	-	5000	-
"12.2.5(Provisions for Earthing (Earth Resistance Test)")	-	5000	-
12.3.3(Safety Tests)	-	2000	Charges taken for protection against access to the live part.
12.4.1(Performance Test)	-	0	All parameters covered under cooling capacity test.
12.4.2(Pressure Test or Leakage Test)	-	0	Mandatory carried out prior to Cooling Capacity Test.
12.4.3(Leakage Current Test)	-	0	already covered.
9.5.3(Air Blockage Test)	-	0	Covered under Freeze-up Test.
9.5.4(Drip Test)	-	0	Covered under Freeze-up Test.

Complete

31 Mar, 2025

IS 1391 : Part 2 (2018)

Room air conditioners - Specification: Part 2 split air conditioners (Third Revision)

Size

655000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 8.2.2 (The Maximum Heating/Overload Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	The Maximum Heating/Overload Test was conducted using a Balanced Ambient Room-Type Calorimeter.
Heating Capacity test (Clause No. 8.2.1, 9.11), Power consumption test by heat pump (Clause No. 9.8)(The Heating capacity test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	The Heating capacity test was conducted using a Balanced Ambient Room-Type Calorimeter.
Clause No. 5.1(Physical Verification)	-	0	Physical Verification
Clause No. 15.3.3(a)(Protection against access to the live part was conducted using Test Probe B.)	-	2000	Protection against access to the live part was conducted using Test Probe B.
Clause No. 15.2.5 & 15.3.3(c)(Provision for Earthing (Earth Resistance Test) was conducted using a Earth Continuity Tester. )	-	5000	Provision for Earthing (Earth Resistance Test) was conducted using a Earth Continuity Tester.
Clause No. 15.2.3 & 15.3.3(b)(High Voltage (Electric strength) Test was conducted using AC withstanding voltage/IR Tester. )	-	5000	High Voltage (Electric strength) Test was conducted using AC withstanding voltage/IR Tester.
Clause No. 15.2.4 & 15.3.3(d)( 3 Leakage Current at Operating Temperature (Leakage Current Test) was conducted using Leak Current Hitester.)	-	5000	Leakage Current at Operating Temperature (Leakage Current Test) was conducted using Leak Current Hitester.
Clause No. 14.3( Sound Test was conducted using Sound Level Meter. )	-	25000	Sound Test was conducted using Sound Level Meter.
Clause No. 8.1.3, 9.5( Freeze Up (Air Blockage Test & Drip Test) Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	Freeze Up (Air Blockage Test & Drip Test) Test was conducted using a Balanced Ambient Room-Type Calorimeter.
Clause No. 8.1.4, 9.6( Enclosure Sweat test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	Enclosure Sweat test was conducted using a Balanced Ambient Room-Type Calorimeter.
Clause No. 8.1.2, 9.4(Maximum Operating test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	Maximum Operating test was conducted using a Balanced Ambient Room-Type Calorimeter.
Cooling Capacity Test (Cl. No. 8.1.1, 9.9), Power Factor Test (Cl. No. 9.3), Power Consumption Test for Cooling (Cl. No. 9.7)(Cooling Capacity Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	Cooling Capacity Test was conducted using a Balanced Ambient Room-Type Calorimeter.
Cooling Capacity Test (Cl. No. 8.1.1, 9.9), Power Factor Test (Cl. No. 9.3), Power Consumption Test for Cooling (Cl. No. 9.7)(Cooling Capacity Test at Full Load and Half Load were conducted using a Balanced Ambient Room-Type Calorimeter. )	-	125000	Cooling Capacity Test at Full Load and Half Load were conducted using a Balanced Ambient Room-Type Calorimeter.
Clause No. 15.4.2( Pressure Test or Leakage Test was conducted prior to start of Cooling Capacity Test using a Balanced Ambient Room-Type Calorimeter. )	-	0	Pressure Test or Leakage Test was conducted prior to start of Cooling Capacity Test using a Balanced Ambient Room-Type Calorimeter.
Clause No. 8.2.2 (The Maximum Heating/Overload Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	-
Heating Capacity test (Clause No. 8.2.1, 9.11), Power consumption test by heat pump (Clause No. 9.8)(The Heating capacity test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	-
Clause No. 5.1(Physical Verification)	-	0	-
Clause No. 15.3.3(a)(Protection against access to the live part was conducted using Test Probe B.)	-	2000	-
Clause No. 15.2.5 & 15.3.3(c)(Provision for Earthing (Earth Resistance Test) was conducted using a Earth Continuity Tester. )	-	5000	-
Clause No. 15.2.3 & 15.3.3(b)(High Voltage (Electric strength) Test was conducted using AC withstanding voltage/IR Tester. )	-	5000	-
Clause No. 15.2.4 & 15.3.3(d)( 3 Leakage Current at Operating Temperature (Leakage Current Test) was conducted using Leak Current Hitester.)	-	5000	-
Clause No. 14.3( Sound Test was conducted using Sound Level Meter. )	-	25000	-
Clause No. 8.1.3, 9.5( Freeze Up (Air Blockage Test & Drip Test) Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	-
Clause No. 8.1.4, 9.6( Enclosure Sweat test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	-
Clause No. 8.1.2, 9.4(Maximum Operating test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	-
Cooling Capacity Test (Cl. No. 8.1.1, 9.9), Power Factor Test (Cl. No. 9.3), Power Consumption Test for Cooling (Cl. No. 9.7)(Cooling Capacity Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	-
Cooling Capacity Test (Cl. No. 8.1.1, 9.9), Power Factor Test (Cl. No. 9.3), Power Consumption Test for Cooling (Cl. No. 9.7)(Cooling Capacity Test at Full Load and Half Load were conducted using a Balanced Ambient Room-Type Calorimeter. )	-	125000	-
Clause No. 15.4.2( Pressure Test or Leakage Test was conducted prior to start of Cooling Capacity Test using a Balanced Ambient Room-Type Calorimeter. )	-	0	-

Complete

31 Mar, 2025

IS 1391 : Part 1 (2017)

Room air conditioners - Specification: Part 1 unitary air conditioners (Third Revision)

Size

665000 View breakup
-

Complete

31 Mar, 2025

Bureau of Indian Standards

The National Standards Body of India

Sierra Aircon Pvt. Ltd.

C-470, Pioneer Indl. Park, P.O. Pathredi, (Bilaspur-Tauru Road), GURUGRAM, Gurugram, Haryana, 122413

9871557776 mail@sierraaircon.com

Scope List