BIS - LIMS (Laboratory Information Management System)

CHOKSI LABORATORIES LIMITED INDORE

Survey No. 9/1 , Balaji Tusiyana Industrial Estate , Kumedi, indore, Indore, Madhya Pradesh, 452010

8770896041 qa.indore@choksilab.com

Scope List

Reset

30 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 17545 (2021)

WHITE CEMENT BASED POLYMERIC PUTTY

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5 , Table 1 , 1) , iii)(Setting time Initial, Min Final, Max)	-	1500	NA
4.5 , Table 1 , 1) , ii)(Water retentivity, percent, min)	-	2500	NA
4.6 , Table 2 , 1) , i)(Compressive strength, 28 days, Min)	-	3500	NA
4.5 , Table 1 , 1) , i)(Tensile adhesion strength (avg. of min 3 readings) @14 days, N/mm2 , Min)	-	3500	NA
4.5 , Table 1 , 1) , iv)(Polymer content (based on loss on ignition), percent by mass, Min)	-	2500	NA
4.5 , Table 1 , 1) , v)(Degree of whiteness, percent, Min)	-	2500	NA
4.5 , Table 1 , 1) , vi)(Cement content, percent, Min)	-	2500	NA

31 Dec, 2026

-
-

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

40500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.4(Carbon Black Content)	-	1000	NA
Cl.4.1.4(Carbon Black Di spersion)	-	500	NA
Cl.4.1.3(Den sity Test)	-	750	NA
Cl.4.1.3(MFR Test)	-	1250	NA
4.1.3, Table 1,(iii)(Thermal stability)	-	1500	NA
4.1.3, Table 1,(iv)(Volatile matter)	-	500	NA
4.1.3, Table 1,(v)(Water content)	-	500	NA
4.2(Metallic Couplers)	-	1500	NA
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Carbon Content)	-	750	NA
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Sulphur Content)	-	750	NA
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Phosphorous Content)	-	750	NA
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Manganese Content)	-	750	NA
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Silicon Content)	-	750	NA
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Aluminium Content)	-	750	NA
5(Dimensions of pipe - i) Outside diameter)	-	500	NA
5(Dimensions of pipe - ii) Wall thickness minimum)	-	500	NA
Cl.6.2.4(Workmanship and Appearance)	-	500	NA
7.3(Quick Couple Fitting)	-	750	NA
Cl.7.2.3(Weld ability Test)	-	5000	NA
7.2.1(Leakage Test)	-	1500	NA
Cl.7.2.2(Cl.7.2.2)	-	500	NA
7.1.6(Corrected Density)	-	750	NA
7.4(Fusion Compatibility Test- b) Acceptance test)	-	5000	NA
Cl.7.1.4(Tensile Test)	-	1500	NA
7.1.3(Reversion)	-	1000	NA
Cl.7.1.2(Hydraulic Characteristic)	-	5000	NA
Cl.7.1.2(Hydraulic Characteristic)	-	5000	NA

31 Dec, 2026

-
-

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

Type A and Type B

22750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	250	NA
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0	NA
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	0	NA
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	250	NA
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	0	NA
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	250	NA
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	NA
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	0	NA
7.2.1(DIMENSIONS-Socket)	-	0	NA
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	100	NA
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	250	NA
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	0	NA
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	100	NA
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	100	NA
9.1(PIPE ENDS)	-	100	NA
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	NA
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	100	NA
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	350	NA
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1250	NA
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	950	NA
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	350	NA
10.3(Effect on Water Test)	-	2300	NA
10.7(Sulphated Ash Content)	-	950	NA
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	3050	NA
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	1750	NA
11.2(Resistance to External Blows at 0°C)	-	450	NA
6.1.2(PVC Resin)	-	550	NA
6.1.1(VCM Content)	-	2750	NA
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	3050	NA
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	1750	NA
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	1750	NA

31 Dec, 2026

-
-

IS 1328 (1996)

Veneered Decorative Plywood -Specification

Type 1 , Type 2

3900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Grade - For BWR)	-	100	NA
4.1(Grade - For MR)	-	100	NA
4.2(Type - For Type 1)	-	100	NA
4.2(Type - For Type 2)	-	100	NA
7.1.1(Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1)	-	100	NA
7.2.1(Requirements - Open splits, checks or open joints - For Type 2 - Cl. 7.2.1)	-	100	NA
7.1.2(Requirements - Other defects - For Type 1 - Cl. 7.1.2)	-	100	NA
7.2.2(Requirements - Other defects - For Type 2 - Cl. 7.2.2.)	-	100	NA
7.1.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 1 - Cl. 7.1.3)	-	100	NA
7.2.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3)	-	100	NA
8(Dimensions & Tolerances - Length - Cl. 8)	-	100	NA
8(Dimensions & Tolerances - Width - Cl. 8)	-	100	NA
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	100	NA
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	500	NA
8(Dimensions & Tolerances - Squareness - Annexure C)	-	200	NA
9(Finish - Cl. 9.1, 8.3)	-	100	NA
9(Finish - Cl. 9.2, 8.3)	-	100	NA
11(Tests - Moisture Content - Part 1 of IS 1734)	-	500	NA
11(Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-	600	NA
11(Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-	600	NA

31 Dec, 2026

-
-

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

BWP GRADE-DECORATIVE/BWP-COMMERCIAL TYPE/MR-DECORATIVE

6910 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.6(Spot test - Annexure L)	-	550	NA
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	550	NA
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	550	NA
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	550	NA
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	550	NA
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	750	NA
9.2.3(Adhesion of Plies - Annexure H)	-	250	NA
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	550	NA
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	550	NA
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	200	NA
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	200	NA
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	200	NA
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	200	NA
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	200	NA
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	200	NA
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	100	NA
7.3(Dimensional Requirements - Squareness - Annexure D)	-	180	NA
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	180	NA
7.3(Dimensional Requirements - Thickness - Annexure E)	-	100	NA
7.3(Dimensional Requirements - Width - 8.1.4)	-	100	NA
7.3(Dimensional Requirements - Length - 8.1.4)	-	100	NA
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	100	NA
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	100	NA
cl. 11(marking)	-	0	NA

31 Dec, 2026

-
-

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

BWP/TYPE-1/TYPE-2/TYPE-3

7550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Types)	-	100	NA
7.2(DIMENSIONS & TOLERANCES )	-	150	NA
7.2(DIMENSIONS & TOLERANCES )	-	150	NA
7.3(DIMENSIONS & TOLERANCES )	-	150	NA
7.4(DIMENSIONS & TOLERANCES )	-	100	NA
7.4(DIMENSIONS & TOLERANCES )	-	50	NA
8.1(WORKMANSHIP AND FINISH )	-	50	NA
8.3(WORKMANSHIP AND FINISH )	-	50	NA
10.1.1(MOISTURE CONTENT)	-	250	NA
10.1.2, 10.1.2.1 (Table-1)(GLUE ADHESION IN DRY STATE)	-	250	NA
10.1.2, 10.1.2.2(GLUE ADHESION IN DRY STATE)	-	200	NA
10.1.3, 10.1.3.1.1 (Table-1)(RESISTANCE TO WATER TEST)	-	150	NA
10.1.3, 10.1.3.1.2(RESISTANCE TO WATER TEST)	-	150	NA
10.1.4(RESISTANCE TO WATER TEST)	-	150	NA
10.1.5(MYCOLOGICAL TEST )	-	250	NA
10.1.5, 10.1.5.1 (Table-1)(MYCOLOGICAL TEST )	-	250	NA
10.1.5.2(MYCOLOGICAL TEST )	-	150	NA
10.1.6(TENSILE STRENGTH)	-	250	NA
10.1.7 (Table-2)(STATIC BENDING STRENGTH)	-	250	NA
10.1.7 (Table-2)(STATIC BENDING STRENGTH)	-	250	NA
10.1.8 (Table-3)(WET BENDING STRENGTH)	-	250	NA
10.1.8 (Table-3)(WET BENDING STRENGTH)	-	250	NA
10.1.9(RETENTION OF PRESERVATIVE)	-	250	NA
12, 12.1(MARKING)	-	100	NA
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	100	NA
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-	100	NA
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	100	NA
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-	100	NA
Cl. 10.1.8 (Table 3)(Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	100	NA
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-	100	NA
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	100	NA
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-	100	NA
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	100	NA
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Average))	-	100	NA
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	100	NA
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Average))	-	100	NA
Cl. 10.1.7 (Table 2)(Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	100	NA
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Average))	-	100	NA
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	100	NA
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Average))	-	100	NA
Cl. 10.1.6(Cl. 10.1.6 (Tensile Strength: Sum of the Tensile Strength in two directions))	-	150	NA
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Perpendicular to grain))	-	150	NA
Cl. 10.1.6(Cl. 10.1.6 (Tensile Strength: Parallel to grain))	-	100	NA
10.1.9(Chem)(RETENTION OF PRESERVATIVE)	-	500	NA
cl. 10.1.2.1(glue adhesion in dry state - glue shear strength - AVERAGE)	-	150	NA
cl. 10.1.2.1(glue adhesion in dry state - glue shear strength - WOOD FAILURE, Average)	-	150	NA
cl. 10.1.3.1(resistance to water test - glue shear strength - AVERAGE)	-	150	NA
cl. 10.1.3.1(resistance to water test - glue shear strength - WOOD FAILURE, Average)	-	100	NA
cl. 10.1.5.1(mycological test - glue shear strength - AVERAGE)	-	100	NA
cl. 10.1.5.1(mycological test - glue shear strength - WOOD FAILURE, Average)	-	100	NA

31 Dec, 2026

-
-

IS 303 (1989)

Plywood for General Purposes -

BWR AND MR/ AA TYPE/AB TYPE/BB TYPE

6300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	350	NA
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	350	NA
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	350	NA
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	350	NA
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	350	NA
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	350	NA
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	350	NA
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	350	NA
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	500	NA
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	500	NA
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	500	NA
11.3(Moisture Content - Part 1 of IS 1734)	-	350	NA
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	200	NA
8(Dimensions & Tolerances - Squareness - Annexure C)	-	200	NA
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	100	NA
8(Dimensions & Tolerances - Width - Cl. 8)	-	100	NA
8(Dimensions & Tolerances - Length - Cl. 8)	-	100	NA
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	100	NA
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	0	NA
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	250	NA
5.1(Type - For BB Type)	-	100	NA
5.1(Type - For AB Type)	-	100	NA
5.1(Type - For AA Type)	-	100	NA
4(Grade - For MR grade)	-	100	NA
4(Grade - For BWR grade)	-	100	NA
cl. 13.1(marking)	-	100	NA

31 Dec, 2026

-
-

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

9900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0 (chem)(MATERIAL)	-	250	NA
4.6.2(TRANSPARANCY)	-	250	NA
4.6.3(LEAKAGE TEST)	-	200	NA
4.6.4(DROP TEST)	-	200	NA
4.6.5(MIGRATION TEST)	-	350	NA
4.6.6(PORTABILITY TEST)	-	550	NA
4.6.5.1 (chem)(Colour migration (Caps))	-	500	NA
4.6.3, clause 6 of IS:2798:1998(Leakage test- c. Air pressure leakage)	-	100	NA
4.6.3, clause 6 of IS:2798:1998(Leakage test- b. Vibration leakage)	-	100	NA
4.6.3, clause 6 of IS:2798:1998(Leakage test- a. Closure leakage )	-	100	NA
4.5, IS:2798:1998(Wall thickness- Bottom, in mm)	-	100	NA
4.5, IS:2798:1998(Wall thickness- Middle , in mm)	-	100	NA
Cl. 4.5(Cl. 4.5 Wall Thickness (Top))	-	100	NA
Cl. 4.4 (a)(Capacity)	-	100	NA
4.3(Workmanship, Finish & Appearance)	-	100	NA
4.2 (chem)(Design, Shape & Dimension)	-	100	NA
4.4 , clause 5 of IS:2798:1998(Brimful capacity in ml)	-	200	NA
Cl. 4.6.5 (chem)(Cl. 4.6.5 Overall migration (Caps))	-	500	NA
Cl.4.6.7.2 and 4.6.7.3, Table 3, (i)(Barium)	-	350	NA
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ii)(Cobalt)	-	350	NA
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iii)(Copper)	-	350	NA
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iv)(Iron)	-	350	NA
Cl.4.6.7.2 and 4.6.7.3, Table 3, (v)(Lithium)	-	350	NA
CL 4.6.7.2 and 4.6.7.3, Table 3 (vi)(Manganese)	-	350	NA
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vii)(Zinc)	-	350	NA
Cl.4.6.7.2 and 4.6.7.3, Table 3, (viii)(Antimony)	-	350	NA
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	2500	NA
4.6.5 , IS:9845:1998 (chem)(Migration- b. Amount of extractive)	-	350	NA
4.6.5 , IS:9845:1998 (chem)(Migration- a. Amount of extractive)	-	350	NA

31 Dec, 2026

-
-

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	600	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	400	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	400	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	400	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	300	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	300	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	300	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	300	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	300	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	300	-
7 -Table 2- i(Fineness 4031 Part 2)	-	900	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	600	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	600	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	600	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	600	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	600	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	0	-

31 Dec, 2026

-
-

IS 1165 (2022)

WHOLE MILK POWDER - SPECIFICATION (Sixth Revision of IS 1165)

26500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	0	-
3.2(Flavour and Taste)	-	0	-
3.4.5(Moisture)	-	0	-
3.4.5(Total solids)	-	0	-
3.4.5(Fat)	-	0	-
3.4.5(Insolubility index)	-	0	-
3.4.5(Total ash)	-	0	-
3.4.5(Titratable acidity (lactic acid))	-	0	-
3.5(Bacterial count)	-	0	-
3.5.2(Coliform count)	-	0	-
3.5.3(Staphylococcus Aureus)	-	0	-
3.5.4(Salmonella)	-	0	-
3.5.5(Shigella)	-	0	-
Clause 3.5,Table 1 ,Sl No i)(Moisture)	-	500	-
Clause 3.5,Table 1 ,Sl No ii)(Total solids)	-	500	-
Clause 3.5,Table 1 ,Sl No iii)(Milk fat)	-	500	-
Clause 3.5,Table 1 ,Sl No iv)(Milk protein in milk solids not fat)	-	500	-
Clause 3.5,Table 1 ,Sl No v)(Insolubility index)	-	500	-
Clause 3.5,Table 1 ,Sl No vi)(Total ash(on dry basis))	-	500	-
Clause 3.5,Table 1 ,Sl No vii)(Titratable acidity (lactic acid),)	-	500	-
Clause 3.5,Table 1 ,Sl No viii)(Scorched particle)	-	500	-
Clause 3.5,Table 2 ,Sl No i)(Aerobic plate count)	-	1000	-
Clause 3.5,Table 2 ,Sl No ii)(Coliform Count)	-	1000	-
Clause 3.5,Table 2 ,Sl No iii)(Staphylococcus aureus(Coagulase positive))	-	1000	-
Clause 3.5,Table 2 ,Sl No v)(Salmonella sp)	-	1000	-
Clause 3.5,Table 2 ,Sl No vi)(Listeria monocytogenes)	-	1000	-
Clause 3.5,Table 2 ,Sl No iv)(Yeast and mould count)	-	1000	-
Clause 3.5,Table 2 ,Sl No vii)(Bacillus cereus)	-	1000	-
Clause 3.5,Table 2 ,Sl No viii)(Sulphite reducing clostridia)	-	1000	-
Clause 3.5,Table 2 ,Sl No ix)(E. coli)	-	1000	-
Clause 3.7,Table 3, Sl No i)(Lead)	-	1000	-
Clause 3.7,Table 3 ,Sl No ii)(Arsenic)	-	1000	-
Clause 3.7,Table 3,Sl No iii)(Aflaoxin)	-	2500	-
Clause 3.7,Table 3, Sl No iv)(Melamine)	-	2500	-
3.1(Discription)	-	0	-
3.2(Flavour and Taste)	-	250	-
3.3(extraneous matter)	-	250	-
3.6(Pesticide residue)	-	6000	-

31 Dec, 2026

-
-

IS 1011 (2002)

Biscuits - Specification (Fourth Revision)

3280 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(General Requirement)	-	0	-
6.3 Table 2 i (Moisture)	-	750	-
6.3 Table 2 ii (Acid insoluble ash (on dry basis))	-	1510	-
6.3 Table 2 iii (Acidity of extracted fat (as oleic acid))	-	1020	-

31 Dec, 2026

-
-

IS 1166 (2022)

SWEETENED CONDENSED MILK, SWEETENED CONDENSED PARTLY SKIMMED MILK, SWEETENED CONDENSED SKIMMED MILK AND SWEETENED CONDENSD HIGH FAT MILK- SPECIFICATION (Third Revision of IS 1166)

22600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1 (i) (Apendix B)(Total milk solids -Condensed Milk)	-	0	-
Table 1 (i) (Apendix B)(Total milk solids - Partly Skimmed Condenied Milk)	-	0	na
Table 1 (i) (Apendix B)(Total milk solids - Skirmned Condensed Milk)	-	0	na
Table 1 (ii) (IS : 11762- 1986)(Fat -Condensed Milk)	-	0	-
Table 1 (ii) (IS : 11762- 1986)(Fat -Partly Skimmed Condenied Milk)	-	0	NA
Table 1 (ii) (IS : 11762- 1986)(Fat -Skirmned Condensed Milk)	-	0	NA
Table 1 (iii) (Apendix C)(Sucrose -Condensed Milk)	-	0	NA
Table 1 (iii) (Apendix C)(Sucrose -Partly Skimmed Condenied Milk)	-	0	NA
Table 1 (iii) (Apendix C)(Sucrose -Skirmned Condensed Milk)	-	0	NA
Table 1 (vi) (Apendix D)(Titratable acidity (as lactic acid) -Condensed Milk)	-	0	NA
Table 1 (vi) (Apendix D)(Titratable acidity (as lactic acid) -Partly Skimmed Condenied Milk)	-	0	NA
Table 1 (vi) (Apendix D)(Titratable acidity (as lactic acid) -Skirmned Condensed Milk)	-	0	NA
Table 1 (v) (Apendix E)(Accelerated starage test -Condensed Milk)	-	0	-
Table 1 (v) (Apendix E)(Accelerated starage test -Partly Skimmed Condenied Milk)	-	0	-
Table 1 (v) (Apendix E)(Accelerated starage test -Skirmned Condensed Milk)	-	0	-
4.1.10.1(Bacterial Count)	-	0	-
Clause no 4.1.10.2(coliform count)	-	0.01	-
Clause no 4.1.10.4(S.aureus)	-	0.01	-
Cl.5.1.10.1(Salmonella IS 5887 Part 3)	-	0	-
Cl.5.1.10.1(Shigella IS 5887 Part 7)	-	0	NA
Clause no 4.1.10.5(E.coli)	-	0.01	-
Clause no 4.1.10.3(Yeast & Mould count)	-	0	-
Clause no 4.1.1(Description)	-	0	-
4.1.4(Colour)	-	0	-
( Clauses 4.1 and 4.7) Tabel 1 (i)(Total milk solid)	-	500	-
4.1,Table 1(ii)(Milk Fat -IS 11721)	-	500	-
4.1,Table 1(iv)(Milk protein in milk solids not fat IS -11917)	-	500	-
4.1,Table 1(iii)(Milk solid not fat- IS1166)	-	500	-
4.1,Table 1(v)(Accelerated Storage Test -IS 1166)	-	2000	-
"4.7 Table 2 (i) "(Aerobic plate count-IS 5402 (Part 1))	-	800	-
"4.7 Table 2 (ii) "(Coliform count-IS 5401 (Part 1))	-	800	-
"4.7 Table 2 (iii) "(Staphylococcuus aureus-IS 5887 (Part 8/Sec-1))	-	800	-
"4.7 Table 2 (v) "(Salmonella sp.-IS 5887 (Part 3/Sec-1))	-	800	-
"4.7 Table 2 (vi) "(Listeria monocytogenes-IS 14988 (Part 1))	-	800	-
"4.7 Table 2 (vii) "(Escherichia coli-IS 5887 (Part 1))	-	800	-
"4.7 Table 2 (iv) "(Yeast & mould count-IS 5403)	-	800	-
4.9,Table 3(i)(Lead -IS 12074)	-	1000	-
4.9,Table 3(ii)(Arsenic - IS 11124)	-	1000	-
4.9,Table 3(iii)(Aflatoxin M1 - ISO 14501 or ISO 14674 or any other international validated method)	-	2000	-
4.9,Table 3(iv)(Melamine - IS 16195)	-	2000	-
4.2(Taste , Flavour,Colour & Odour. Free from rancid , fruity , moldy , tallowy , cooked , sour, sandy and any other objectionable odour and taste -IS 1166)	-	500	-
4.6(Size of lactose crystals- IS 1166)	-	500	-
4.8(Pesticide Residues)	-	6000	-

31 Dec, 2026

-
-

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	250	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	250	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	250	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	250	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	250	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	250	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	250	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	250	-
7 Table-3 iii b(Setting Time Final)	-	500	-
7 Table-3 iii a(Setting Time Initial)	-	500	-
7 Table-3 ii b(Expansion after aeration)	-	250	-
7 Table-3 ii b(Expansion by Autoclave)	-	500	-
7 Table-3 ii a(Expansion after aeration)	-	250	-
7 Table-3 i.(Fineness)	-	1000	-
6.1 Table-2 vii(Chloride content)	-	100	-
6.1 Table-2 vi(Loss on ignition)	-	200	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	400	-
6.1 Table-2 iv(Magnesia)	-	400	-
6.1 Table-2 iii.(Insoluble residue)	-	400	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	500	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	400	-
6 - Table - 1 viii(Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	200	-
6.1 Table-2 viii(Alkali content)	-	200	-
6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	400	-
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	250	-
6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	200	-
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	200	-
6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	200	-
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	250	-
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	200	-

31 Dec, 2026

-
-

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	270	-
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	270	-
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	270	-
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	270	-
Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	270	-
Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	270	-
Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	270	-
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	270	-
Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	270	-
Cl. 6.1, Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	270	-
Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	270	-
Clause 6.1.1(Carbon Equivalent (CE))	-	260	-
Table 1 Note 2(Nb+V+Ti)	-	270	-
Table 1 Note 2(Any Instrumental Method/Chemical Method)	-	270	-
9( FREEDOM FROM DEFECTS)	-	350	-
11(Dimensions)	-	400	-
10.2(Bend)	-	250	-

31 Dec, 2026

-
-

IS 13334 : Part 2 (2014)

Skimmed milk powder - Specification: Part 2 extra grade (First Revision)

Extra Grade

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1 (i)(Moisture (IS 116231or 16072))	-	500	-
Table 1 (ii)(Milk protein in milk solids not fat (IS 72192))	-	500	-
Table 1 (iii)(Milk fat (IS 117213) or Annex B)	-	500	-
Table 1 (iv)(Insolubility index (IS 12759))	-	500	-
Table 1 (v)(Total ash (on dry basis), Annex B of IS 14433)	-	500	-
Table 1 (vi)(Titratable acidity (IS 11766))	-	500	-
Table 1 (vii)(Lactate content (IS 11202))	-	500	-
Table 1 (viii)(Scorched particles (equivalent to Disc B) (IS 13500))	-	500	-
Table 1 (ix)(Bacterial count (IS 5402))	-	500	-
Table 1 (x)(Coliform count (IS 5401 - Part 1))	-	500	-
Table 1 (xi)(Escherichia coli (IS 5887 - Part 1))	-	500	-
Table 1 (xii)(Coagulase positive Staphylococcus aureus (IS 5887 - Part 2))	-	500	-
Table 1 (xiii)(Salmonella (IS 5887 - Part 3))	-	500	-
Table 1 (xiv)(a)(Spore Count: a)Aerobic (Bacillus cereus) Type m (IS 5887 - Part 6))	-	1000	-
Table 1 (xiv)(a)(Spore Count: a) Aerobic (Bacillus cereus) Type M (IS 5887 - Part 6))	-	1000	-
Table 1 (xiv)(b)(Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type m (ISO 15213 : 2003))	-	1000	-
Table 1 (xiv)(b)(Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type M (ISO 15213 : 2003))	-	1000	-
Table 1 (xv)(Listeria monocytogenes (IS 14988 - Part 2 : 2001))	-	1000	-
Clause no 5.4(Flavour)	-	0	-
Clause no 5.2(freedom from extraneous matter)	-	0	-
Clause no 4(Description)	-	0	-
5.8(Pesticides, Heavy metals, toxins & contaminants)	-	6000	-
5.1(freedom from preservatives, neutralizers and adulterants)	-	0	-

31 Dec, 2026

-
-

IS 14433 (2022)

INFANT MILK SUBSTITUTES - SPECIFICATION (Second Revision of IS 14433)

45250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.9.1(Bacterial count)	-	1000	-
6.9.2(Coliform count)	-	1000	-
6.9.3(Escherichia coli)	-	1000	-
6.9.4(Staphylococcus Aureus)	-	1000	-
6.9.5(Salmonella and shigella)	-	0	-
6.9.6(Yeast and mould count)	-	1000	-
6.1(Moisture)	-	500	-
6.1(Milk protein)	-	500	-
6.1(Milk fat)	-	500	-
6.1(Total fat)	-	500	-
6.1(Total ash)	-	500	-
6.1(Acid insoluble ash)	-	500	-
6.1(Insolubility index)	-	500	-
6.1(Vitamin A (as Retinol))	-	1000	-
6.1(Iron)	-	1000	-
6.1(Lead)	-	1000	-
6.1(Arsenic)	-	1000	-
6.1(Tin)	-	1000	-
6.1(Cadmium)	-	1000	-
6.1(Added Vitamin D (expressed as chole-calciferol))	-	1000	-
6.1(Thiamin)	-	1000	-
6.1(Niacin)	-	1000	-
6.1(Riboflavin)	-	1000	-
6.1(Vitamin B6)	-	1000	-
6.1(Vitamin B12)	-	1000	-
6.1(Folic acid)	-	1000	-
6.1(Pentothenic acid)	-	1000	-
6.1(Biotin )	-	1000	-
6.1(Vitamin C)	-	500	-
6.1(Vitamin K)	-	1000	-
6.1(Calcium)	-	1000	-
6.1(Phosphorus)	-	1000	-
6.1(Iodine)	-	500	-
6.1(Copper)	-	1000	-
6.1(Manganese)	-	1000	-
6.1(Zinc)	-	1000	-
6.1(Sodium)	-	1000	-
6.1(Potassium)	-	1000	-
6.1(Chloride)	-	500	-
6.1(Magnesium)	-	1000	-
6.1(Choline)	-	0	-
6.1(Selenium)	-	1000	-
5(Description)	-	0	-
6.3(Flavour taste and odour)	-	0	-
6.4(Scorched particles)	-	0	-
6.5(Linoleate)	-	1500	-
6.1(Vitamin E ( as alpha tocopherol compounds))	-	1000	-
6.5(Vitamin E (for type 2 only))	-	1000	-
6.10.1(Protein content)	-	500	-
6.10.1(Mineral content)	-	0	-
6.10.1(Calcium:phosphorus ratio)	-	0	-
6.10.1(Sodium, Potassium & Chloride)	-	0	-
6.10.1(Whey:casein ratio)	-	500	-
Clause no 6.1(freedom from extraneous matter)	-	0	-
6.10 vi b(Solubility percent)	-	1000	-
Clause 5.10,Table 3, Sl No i)(Aerobic plate count)	-	1000	-
Clause 5.10,Table 3, ,Sl No ix)(Enterobacteriaceae)	-	1000	-
Clause 5.10,Table 3, ,Sl No x)(Enterobacter sakazakii ( Cronobacter sp.))	-	1000	-
Clause 5.10,Table 3, ,Sl No iii)(Staphylococcus aureus)	-	1000	-
Clause 5.10,Table 3, ,Sl No v)(Salmonella sp.)	-	1000	-
Clause 5.10,Table 3, ,Sl No iv)(yeast and mould count)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No i)(Moisture)	-	500	-
Clause 5.7 and 5.10, Table 2 ,Sl No ii)(a) Total protein, including milk fat b) Milk fat)	-	500	-
Clause 5.7 and 5.10, Table 2 ,Sl No iii)(Fat, a) Total fat, including milk fat (for type II))	-	500	-
Clause 5.7 and 5.10, Table 2 ,Sl No iii)(b) Milk fat)	-	500	-
Clause 5.7 and 5.10, Table 2 ,Sl No vi)(Total ash)	-	500	-
Clause 5.7 and 5.10, Table 2 ,Sl No vii)(Acid insoluble ash)	-	500	-
Clause 5.7 and 5.10, Table 2 ,Sl No viii)(Solubility index)	-	500	-
Clause 5.7 and 5.10, Table 2 ,Sl No ix)(Vitamin A (as retinol equivalent, RE))	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xxiii)(Iron)	-	1000	-
Clause 5.12, Table 4 ,Sl No i)(Lead)	-	1000	-
Clause 5.12, Table 4, Table 2 ,Sl No ii)(Arsenic)	-	1000	-
Clause 5.12, Table 4, Table 2 ,Sl No iii)(Tin)	-	1000	-
Clause 5.12, Table 4, Table 2 ,Sl No iv)(Cadmium)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No x)(Vitamin D)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xiv)(Thiamine)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xvi)(Niacin equivalent)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xv)(Riboflavin)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xvii)(Vitamin B6)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xx)(Vitamin B12)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xviii)(Dietary folate equivalent (DFE))	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xix)(Pantothenic acid)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xxi)(Biotin)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xiii)(Vitamin C)	-	500	-
Clause 5.7 and 5.10, Table 2 ,Sl No xii)(Vitamin K)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xxvii)(Calcium)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xxviii)(Phosphorous)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xxxi)(Iodine)	-	500	-
Clause 5.7 and 5.10, Table 2 ,Sl No xxxii)(Copper)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xxxiv)(Manganese)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xxxiii)(Zinc)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xxiv)(Sodium)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xxv)(Potassium)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xxvi)(Chloride)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xxx)(Magnesium)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xxii)(Choline)	-	2000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xxxv)(Selenium)	-	1000	-
5.1(Description)	-	0	-
CL 5.2(Scorched particle)	-	500	-
Clause 5.7 and 5.10, Table 2 ,Sl No iv)(a) Linoleic acid)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xi)(Vitamin E (as α-tocopherol equivalent) (only for type II))	-	1000	-
Clause 5.12, Table 4, Table 2 ,Sl No v)(Melamine)	-	2000	-
Clause 5.7 and 5.10, Table 2 ,Sl No xxix)(Calcium : Phosphorous ratio)	-	1000	-
Clause 5.7,Table 1 ,Sl No xii)(Cholestrol)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No v)(Carbohydrates)	-	500	-
Clause 5.7 and 5.10, Table 2 ,Sl No iv)(b) α-Linoleic acid)	-	1000	-
Clause 5.7 and 5.10, Table 2 ,Sl No iv)(c) Ratio of linoleic acid and α-Linoleic acid)	-	1000	-
Clause 5.10,Table 3, ,Sl No vi)(Listeria monocytogenes)	-	1000	-
Clause 5.10,Table 3, ,Sl No vii)(Bacillus cereus)	-	1000	-
Clause 5.10,Table 3, ,Sl No viii)(Sulphitr reducing clostridia)	-	1000	-
Infant Milk Substitute(Vitamin B12, µg)	-	1000	-

31 Dec, 2026

-
-

IS 9873 : Part 3 (2017)

Safety of toys: Part 3 migration of certain elements (Second Revision)

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	-

31 Dec, 2026

-
-

IS 6444 (2023)

Sulphur Dusting Powders - Specification second revision

2100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2 Table 1(Sulphur Content, NV upto 9)	-	1500	-
2.2 Table 1(Sulphur Content, NV Above 9 below 50)	-	1500	-
2.2 Table 1(Sulphur Content, NV above 50)	-	1500	-
2.2 Table 1(Material passing through 75 micron sieve)	-	300	-
2.2 Table 1(Bulk Density after compacting)	-	300	-
2.1(Description)	-	0	-
3.2.1 & 3.2 Table 1 (i)(Sulphr Content - IS 6444:2023)	-	1500	-
3.2 Table 1 (ii)(Material passing through 75 micron IS Sieve - IS 6940:1982)	-	300	300
3.2 Table 1 (iii)(Bulk Density after compacting - IS 6940:1982)	-	300	-
3.1(Description - IS 6444:2023)	-	0	-

31 Dec, 2026

-
-

IS 14542 (1998)

Partly skimmed milk powder specification

5225 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1(i)(Moisture Type I (IS 11623))	-	500	-
Table 1(i)(Moisture Type II (IS 11623))	-	500	-
Table 1(ii)(Total solids (milk solids and added salts) Type I (IS 11623))	-	300	-
Table 1(ii)(Total solids (milk solids and added salts) Type II (IS 11623))	-	300	-
Table 1(iii)(Milk fat, Type I (IS I1722))	-	500	-
Table 1(iii)(Milk fat, Type II (IS I1722))	-	500	-
Table 1(iv)(Insolubility index, a) Roller dried Type I (IS 12759))	-	425	-
Table 1(iv)(Insolubility index, a) Roller dried Type II (IS 12759))	-	425	-
Table 1(iv)(Insolubility index, b) Spray dried Type I (IS 12759))	-	425	-
Table 1(iv)(Insolubility index, b) Spray dried Type II (IS 12759))	-	425	-
Table 1(v)(Total ash Type I (Annex B of IS 14433 - Part 1))	-	750	-
Table 1(v)(Total ash Type II (Annex B of IS 14433 - Part 1))	-	750	-
Table 1(vi)(Titratable acidity (as lactic acid) Type I (IS 11766))	-	750	-
Table 1(vi)(Titratable acidity (as lactic acid) Type II (IS 11766))	-	750	-
Cl 6.6.1(Bacterial Count (IS 5402))	-	1000	-
Cl 6.6.2(Coliform Count ((IS 5402))	-	1000	-
5.1(Description)	-	0	-
6.1(Etraneous matters, added colours and flavours)	-	0	-
Cl 6.4(Flavour and Taste (IS 10030))	-	0	-

31 Dec, 2026

-
-

IS 3383 (2023)

SULPHUR WETTABLE POWDERS SPECIFICATION

4600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2 Table 1(Wettability)	-	300	-
2.2 Table 1(Sulphur content, NV above 9 below 50)	-	1200	-
2.2 Table 1(Sulphur content, NV above 50)	-	1200	-
2.2 Table 1(Suspensibility, after accelerated storage)	-	1800	-
2.2 Table 1(Material passing through 45 micron IS Sieve, after accelerated storage)	-	300	-
2.2 Table 1(Arsenic ( as As ))	-	1000	-
2.1(Description)	-	0	-
3.2 Table 1 (iv)(Wettability - IS 6940:1982)	-	500	-
3.2.1 & 3.2 Table 1 (i)(Sulphr Content - IS 3383:2023)	-	1200	-
3.2 Table 1 (iii)(Suspensibility, after accelerated storage - IS 6940:1982)	-	500	-
3.2 Table 1 (ii)(Material passing through 45 micron IS Sieve - IS 6940:1982)	-	500	-
3.2 Table 1 (v)(Arsenic (as As) - IS 3383:2023)	-	500	-
3.1(Description - IS 3383:2023)	-	0	-

31 Dec, 2026

-
-

IS 1507 (1977)

Specification for copper oxychloride water dispersible powder concentrates

2700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.2.1(Description)	-	0	-
Cl. 2.3, Table-1(Copper Content)	-	1000	-
Cl. 2.3, Table-1(Suspensibility)	-	1200	-
Cl. 2.3, Table-1(pH of one percent aqueous dispersion)	-	500	-

31 Dec, 2026

-
-

IS 8944 (2005)

Chlorpyrifos, emulsifiable concentrates - Specification (First Revision)

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description)	-	0	-
3.2.2(Cold Test)	-	400	-
3.2.3(Flash Point (Abel))	-	400	-
3.2.4(Emulsion Stability)	-	400	-
3.3.1(Chloropyrifos content)	-	1900	-
3.3.2(Acidity (as H2SO4), )	-	400	-

31 Dec, 2026

-
-

IS 13334 : Part 1 (2014)

Skimmed milk powder - Specification: Part 1 standard grade (Second Revision)

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.6(Bacterial count)	-	500	-
5.6(Coliform count )	-	500	-
5.6(Escherichia coli)	-	500	-
5.6(Coagulase positive Staphylococcus aureus)	-	500	-
5.6(Salmonella)	-	800	-
5.6(Spore count, Aerobic (Bacillus cereus))	-	1000	-
5.6(Spore count, Anaerobic (Sulfite reducing Clostridia))	-	1000	-
5.6(Listeria monocytogenes)	-	800	-
4(Description)	-	0	-
5.2(Absence of extraneous matter, added colour and added flavour)	-	0	-
5.6(Moisture)	-	500	-
5.6(Milk protein in milk solids not fat)	-	500	-
5.6(Milk fat)	-	500	-
5.6(Insolubility index)	-	500	-
5.6(Total ash (on dry basis))	-	500	-
5.6(Titratable acidity (lactic acid))	-	500	-
5.6(Scorched particles)	-	500	-
Cl 5.4(The flavour of the product or of the reconstituted milk shall be pleasant and clean (see IS 10030).)	-	100	-
Cl 5.3(Calcium chloride, citric acid and sodium citrate, sodium salts of orthophosphoric acid and polyphosphoric acid (as linear phosphate), )	-	300	-
5.7(Pesticides, Heavy metals, toxins & contaminants)	-	6000	-

31 Dec, 2026

-
-

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Carbon %)	-	100	-
4.1(Silicon %)	-	100	-
4.1(Sulphur %)	-	100	-
4.1(Manganese %)	-	100	-
4.1(Phosphorus %)	-	100	-
4.1(Cr)	-	100	-
4.1(Mo)	-	150	-
4.1(V)	-	150	-
4.1( Copper %)	-	150	-
4.1(Ni)	-	150	-
4.1( Nitrogen%)	-	150	-
4.1( Aluminium %)	-	150	-
4.1( Ti)	-	150	-
4.1( Nb)	-	150	-
Cl 5(Deformations and Surface Characteristics)	-	150	-
Cl. 7.2 Table -2 (Nominal Mass)	-	150	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	200	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	300	-
Cl. 9.3, Table 4(Bend Test )	-	300	-
Cl. 8.1 Table 3(Elongation, percentage)	-	300	-
Cl. 8.1 Table 3(TS/YS ratio)	-	0	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	400	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	300	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	200	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	200	-
8.18.1 Table 3(Total elongation at maximum force)	-	300	-
5.7(PullOut (Bond Test))	-	2500	-
Cl. 6.1(Nominal Size)	-	0	-
Cl. 4.3(Visual Inspection.)	-	0	-
Cl. 5.2(Surface Characteristics)	-	150	-
Cl. 5.7(Average compressive strength of cubes at 28 days)	-	0	-
Cl. 5.7(Bond Strength at 0.25 mm slip)	-	0	-
Cl. 5.7(Date of testing of concrete cubes)	-	0	-
Cl. 5.7(Date of casting of concrete cubes)	-	0	-
4.1(Sulphur and phosphorous)	-	0	-
4.1(CE)	-	0	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	100	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	100	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
4.2(Niobium (Nb))	-	150	-
4.2(Boron (B))	-	150	-

31 Dec, 2026

-
-

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

8250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Workmanship)	-	100	-
Cl. 15, 16(Off Centre of Web)	-	100	-
Cl 18(Weight)	-	250	-
Cl 15(Length, Width & Thickness)	-	250	-
Cl. 15 (Cl. 15 Channel Section: Sweep)	-	250	-
Cl. 15(Cl. 15 Channel Section: Camber)	-	250	-
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Concavity))	-	250	-
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Convexity))	-	250	-
Cl. 15(Cl. 15 Channel Section: Flange Out of Square)	-	250	-
Cl. 15(Cl. 15 Channel Section: Width of Flange)	-	250	-
Cl. 15(Cl. 15 Channel Section: Depth)	-	250	-
Cl. 15(Cl. 15 Square Bar: Out of Square)	-	250	-
Cl. 15(Cl. 15 Square Bar: Side Width: Minimum)	-	250	-
Cl. 15(Cl. 15 Square Bar: Side Width: Maximum)	-	250	-
Cl. 15(Cl. 15 Round Bar: Out of Shape)	-	0	-
Cl. 15(Cl. 15 Round Bar: Diameter Minimum)	-	250	-
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	600	-
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	600	-
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-	700	-
Cl 13(Y Groove Cracking Test)	-	1000	-
Cl. 15, 16(Flange out of square (I beam))	-	250	-
Cl. 15, 16(Width of flange (I Beam))	-	100	-
Cl. 15, 16(Depth (I Beam))	-	100	-
Cl. 15, 16(Mass (Plate))	-	100	-
Cl. 15, 16(Flange Slope)	-	100	-
Cl. 15, 16(Web Thickness)	-	100	-
Cl. 15, 16(Flange Thickness)	-	100	-
Clause - 5, 8.1 & 8.2(E650, ALUMINIUM)	-	135	-
Clause - 5, 8.1 & 8.2(E650, SILICON)	-	135	-
Clause - 5, 8.1 & 8.2(E650, NITROGEN)	-	135	-
Clause - 5, 8.1 & 8.2(E650 ,MANGANESE)	-	135	-
Clause - 5, 8.1 & 8.2(E650, PHOSPHURS)	-	135	-
Clause - 5, 8.1 & 8.2(E650, SULPHUR)	-	135	-
Clause - 5, 8.1 & 8.2(E650, CARBON)	-	150	-
Clause - 5, 8.1 & 8.2(E600, CARBON +EQUIVELENT )	-	500	-
Clause - 5, 8.1 & 8.2(E600, ALUMINIUM)	-	135	-
Clause - 5, 8.1 & 8.2(E600, SILICON)	-	135	-
Clause - 5, 8.1 & 8.2(E600, NITROGEN)	-	135	-
Clause - 5, 8.1 & 8.2(E600 ,MANGANESE)	-	135	-
Clause - 5, 8.1 & 8.2(E600, PHOSPHURS)	-	135	-
Cl. 15, 16(Leg Length Difference (Angle))	-	250	-
Cl. 15, 16(Leg Length B (Angle))	-	250	-
Cl. 15, 16(Leg Length A (Angle))	-	250	-
Cl. 15, 16(Toe Radius R2)	-	250	-
Cl. 15, 16(Root Radius R1)	-	250	-
Clause 12(IS 1757)	-	1000	-
Clause - 5, 8.1 & 8.2(E600, SULPHUR)	-	135	-
Clause - 5, 8.1 & 8.2(E600, CARBON)	-	150	-
Clause - 5, 8.1 & 8.2(E550, CARBON +EQUIVELENT )	-	500	-
Clause - 5, 8.1 & 8.2(E550, ALUMINIUM)	-	135	-
Clause - 5, 8.1 & 8.2(E550, SILICON)	-	135	-
Clause - 5, 8.1 & 8.2(E550, NITROGEN)	-	135	-
Clause - 5, 8.1 & 8.2(E550 ,MANGANESE)	-	135	-
Clause - 5, 8.1 & 8.2(E550, PHOSPHURS)	-	135	-
Clause - 5, 8.1 & 8.2(E550, SULPHUR)	-	135	-
Clause - 5, 8.1 & 8.2(E550, CARBON)	-	150	-
Clause - 5, 8.1 & 8.2(E450, CARBON +EQUIVELENT )	-	500	-
Clause - 5, 8.1 & 8.2(E450, ALUMINIUM)	-	135	-
Clause - 5, 8.1 & 8.2(E450, SILICON)	-	135	-
Clause - 5, 8.1 & 8.2(E450, NITROGEN)	-	135	-
Clause - 5, 8.1 & 8.2(E450 ,MANGANESE)	-	135	-
Clause - 5, 8.1 & 8.2(E450, PHOSPHURS)	-	135	-
Clause - 5, 8.1 & 8.2(E450, SULPHUR)	-	135	-
Clause - 5, 8.1 & 8.2(E450, CARBON)	-	150	-
Clause - 5, 8.1 & 8.2(E410, CARBON +EQUIVELENT )	-	500	-
Clause - 5, 8.1 & 8.2(E410, ALUMINIUM)	-	135	-
Clause - 5, 8.1 & 8.2(E410, SILICON)	-	135	-
Clause - 5, 8.1 & 8.2(E410, NITROGEN)	-	135	-
Clause - 5, 8.1 & 8.2(E410 ,MANGANESE)	-	135	-
Clause - 5, 8.1 & 8.2(E410, PHOSPHURS)	-	135	-
Clause - 5, 8.1 & 8.2(E410, SULPHUR)	-	135	-
Clause - 5, 8.1 & 8.2(E410, CARBON)	-	150	-
Clause - 5, 8.1 & 8.2(E350, CARBON +EQUIVELENT )	-	500	-
Clause - 5, 8.1 & 8.2(E350, ALUMINIUM)	-	135	-
Clause - 5, 8.1 & 8.2(E300, SILICON)	-	135	-
Clause - 5, 8.1 & 8.2(E350, NITROGEN)	-	135	-
Clause - 5, 8.1 & 8.2(E350 ,MANGANESE)	-	135	-
Clause - 5, 8.1 & 8.2(E350, PHOSPHURS)	-	135	-
Clause - 5, 8.1 & 8.2(E350, SULPHUR)	-	135	-
Clause - 5, 8.1 & 8.2(E350, CARBON)	-	150	-
Clause - 5, 8.1 & 8.2(E300, CARBON +EQUIVELENT )	-	500	-
Clause - 5, 8.1 & 8.2(E300, ALUMINIUM)	-	135	-
Clause - 5, 8.1 & 8.2(E300, NITROGEN)	-	135	-
Clause - 5, 8.1 & 8.2(E300 ,MANGANESE)	-	135	-
Clause - 5, 8.1 & 8.2(E300, PHOSPHURS)	-	135	-
Clause - 5, 8.1 & 8.2(E300, SULPHUR)	-	135	-
Clause - 5, 8.1 & 8.2(E300, CARBON)	-	150	-
Clause - 5, 8.1 & 8.2(E275, CARBON +EQUIVELENT )	-	500	-
Clause - 5, 8.1 & 8.2(E275, ALUMINIUM)	-	135	-
Clause - 5, 8.1 & 8.2(E275, SILICON)	-	135	-
Clause - 5, 8.1 & 8.2(E275, NITROGEN)	-	135	-
Clause - 5, 8.1 & 8.2(E275 ,MANGANESE)	-	135	-
Clause - 5, 8.1 & 8.2(E275, PHOSPHURS)	-	135	-
Clause - 5, 8.1 & 8.2(E275, SULPHUR)	-	135	-
Clause - 5, 8.1 & 8.2(E275, CARBON)	-	150	-
Clause - 5, 8.1 & 8.2(E250, CARBON +EQUIVELENT )	-	500	-
Clause - 5, 8.1 & 8.2(E250, ALUMINIUM)	-	135	-
Clause - 5, 8.1 & 8.2(E250, SILICON)	-	135	-
Clause - 5, 8.1 & 8.2(E250, NITROGEN)	-	135	-
Clause - 5, 8.1 & 8.2(E250 ,MANGANESE)	-	135	-
Clause - 5, 8.1 & 8.2(E250, PHOSPHURS)	-	135	-
Clause - 5, 8.1 & 8.2(E250, SULPHUR)	-	135	-
Clause - 5, 8.1 & 8.2(E250, CARBON)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	135	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	135	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	135	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	135	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	135	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	135	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	135	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	135	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	135	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	135	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Clause 8, Table 1, Note 2(Any Instrumental Method/Chemical Method)	-	0	-
Clause 8, Table 1, Note 5(Any Instrumental Method/Chemical Method)	-	0	-
Clause 8, Table 1, Note 5(Any Instrumental Method/Chemical Method)	-	0	-
Clause 8, Table 1, Note 5(By Calculation)	-	0	-
Clause 8, Table 1, Note 6(Any Instrumental Method/Chemical Method)	-	0	-
Clause 8, Table 1, Note 6(By Calculation)	-	0	-
Cl 11.3(Press)	-	0	-
Clause 7(IS 2062)	-	250	-
Clause - 5, 8.1 & 8.2(E650, CARBON +EQUIVELENT )	-	500	-

31 Dec, 2026

-
-

IS 15658 (2006)

Precast concrete blocks for paving - Specification

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2.1 & 7.1(VISUAL INSPECTION)	-	100	-
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	100	-
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	100	-
B-1.3.1(MEAN INDIVIDUAL LENGTH (of all eight test specimens), L)	-	100	-
B-5(AVERAGE LENGTH (Average for eight test specimens), L)	-	100	-
Table 1(MINIMUM PAVER BLOCK THICKNESS)	-	100	-
B-1.3.2(MEAN INDIVIDUAL THICKNESS (of all eight test specimens), T)	-	100	-
B-5(AVERAGE THICKNESS (Average for eight test specimens), T)	-	100	-
B-1.3.3(INDIVIDUAL ASPECT RATIO (L/T) (of all eight test specimens))	-	100	-
B-5(AVERAGE ASPECT RATIO (L/T) (for eight test specimens))	-	100	-
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	100	-
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	100	-
B-5(INDIVIDUAL PLAN AREA, ASP (of all eight test specimens) )	-	100	-
B-5(AVERAGE PLAN AREA, ASP (for eight test specimens))	-	100	-
B-5(INDIVIDUAL WEARING FACE AREA, Asw (of all eight test specimens))	-	100	-
B-5(AVERAGE WEARING FACE AREA, Asw (for eight test specimens))	-	100	-
B- 4.3(MEAN INDIVIDUAL SQUARENESS (of all eight test specimens) )	-	100	-
B-5(AVERAGE SQUARENESS (for eight test specimens))	-	100	-
6.2.3(THICKNESS OF WEARING LAYER, if the sample is Double Layered (for eight test specimens))	-	100	-
6.2.4(WATER ABSORPTION TEST (Average for three test specimens))	-	1000	-
6.2.5(AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens) )	-	1250	-
6.2.5.1(INDIVIDUAL COMPRESSIVE STRENGTH (Individual strength of eight test specimen))	-	1250	-
6.2.6(ABRASION RESISTANCE, Dry Condition (For all eight test specimens))	-	750	-
6.2.6(ABRASION RESISTANCE, Wet Condition (For all eight test specimens))	-	750	-
6.2.7(INDIVIDUAL TENSILE SPLITTING STRENGTH (Individual strength of eight test specimen ))	-	500	-
6.2.7(AVERAGE TENSILE SPLITTING STRENGTH (for eight test specimen ))	-	500	-
6.2.8(INDIVIDUAL FLEXURAL STRENGTH (Individual strength of eight test specimen ))	-	250	-
6.2.8(AVERAGE FLEXURAL STRENGTH (Average strength of eight test specimen ))	-	250	-
Annex-G-7(INDIVIDUAL BREAKING LOAD (Individual Load of eight test specimen ))	-	250	-
Annex-G-7(AVERAGE BREAKING LOAD)	-	250	-
6.2.2, Table 4(Arris Width wise )	-	100.01	-
6.1.3(Physical requirement)	-	4000	FREEZE THAW DURABILITY

31 Dec, 2026

-
-

IS 15559 (2004)

Polyester strapping - Specification

4430 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Surface finish)	-	300	-
4.3(Colour)	-	300	-
4.5(Freedom from Defects)	-	250	-
Table-1 (2)(Nominal width of strapping)	-	100	-
Table-1 (3)(Nominal thickness of strapping)	-	100	-
Table-1 (4)(Type)	-	50	-
Table-1 (5)(Breaking strength, Min)	-	150	-
Table-2 (2)(Tensile strength, kg/mm2)	-	750	-
Table-2 (3)(Elongation, %)	-	250	-
5.2(Split Resistance)	-	500	-
5.3, Table-3(Camber)	-	300	-
4.4(Intrinsic Viscosity)	-	750	-
4.1(Manufacture)	-	630	-

31 Dec, 2026

-
-

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

29500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	2000	-
8.9 table-6(Elongation at Break)	-	500	-
8.8(Tensile Strength for Butt-fusion)	-	1000	-
8.7(Density)	-	500	-
8.5 (Oxidation Induction Time)	-	2500	-
8.4( Melt Flow Rate)	-	1000	-
8.2(Longitudinal Reversion Test)	-	1000	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	2500	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	10000	-
7.4.1.2(Ovality)	-	200	-
7.4 table -3 & 4(6.1 Dimensions)	-	250	-
7.2(Length)	-	100	-
6.2.1(6.1.1 Identification Stripes)	-	250	-
6.2(Colour)	-	100	-
6.1.4(PIPE DESCRIPTION)	-	0	-
6.1.3 (PIPE DESCRIPTION)	-	0	-
8.6(Overall migration)	-	2500	-
8.3(Carbon black)	-	1500	-
5.4(Anti oxydent)	-	500	-
5.3(e)(Carbon Black Master Batch)	-	0	-
5.3(d)(Carbon Black Master Batch)	-	0	-
5.3(c)(Carbon Black Master Batch)	-	0	-
5.3(b)(Carbon Black Master Batch)	-	0	-
5.3 (a)(Carbon Black Master Batch)	-	0	-
5.2(Density)	-	1000	-
5.2(MFI @ 1900C/5.0 Kg)	-	1000	-
5.2(Volatile matter Content)	-	500	-
7()	-	100	-
5.3(Toluene Extract)	-	500	-

31 Dec, 2026

-
-

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

Standard Quality

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	250	Spectro
6.1(Manganese %)	-	249.99	Spectro
6.1(Sulphur %)	-	250	Spectro
6.1(Silicon %)	-	250	Spectro
6.1( Copper %)	-	250	Spectro
6.1( Aluminium %)	-	250	Spectro
6.1( Nb)	-	250	Spectro
6.1(V)	-	250	Spectro
6.1( Ti)	-	250	Spectro
6.1(Cr)	-	250	Spectro
6.1(Mo)	-	250	Spectro
6.1(Carbon %)	-	250	-
6.1(Phosphorus %)	-	250	SPECTRO
6.1(Silicon %)	-	250	IS 228
6.1(Cr)	-	250	-
6.1(Ni)	-	250	-
6.1(Phosphorus %)	-	250	-
6.1( Nitrogen%)	-	250	SPECTRO
6.1( Aluminium %)	-	250	-
6.1(Sulphur %)	-	250	-
6.1(Carbon %)	-	250	-
6.1(Manganese %)	-	250	-
6.1(Phosphorus %)	-	250	-
6.1( Nitrogen%)	-	250	-
6.1( Copper %)	-	400	-
6.1( Aluminium %)	-	400	-
6.1( Nb)	-	400	-
6.1(V)	-	400	-
6.1( Ti)	-	400	-
6.1(Cr)	-	400	-
6.1(Mo)	-	400	-
6.1(Ni)	-	400	-

31 Dec, 2026

-
-

IS 13422 (1992)

Disposable surgical rubber gloves specification

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4(Sterility)	-	4000	-
4(TYPES)	-	0.00	-
5.2.1(General Characteristics and Dimensions)	-	200	-
5.2.2 and Table 1 Fig. 1(Dimensions - Length)	-	400	-
5.2.2 and Table 1 Fig. 1(Dimensions - Width)	-	400	-
5.2.2 and Table 1 Fig. 1(Dimensions - Thickness of Finger)	-	200	-
5.2.2 and Table 1 Fig. 1(Dimensions - Thickness of Palm)	-	200	-
5.2.2 and Table 1 Fig. 1(Dimensions - Thickness of Cuff)	-	100	-
5.3 and Table 2( Tensile Strength Before Ageing)	-	500	-
5.3 and Table 2( Elongation at Break Before Ageing)	-	500	-
5.3 and Table 2(Stress at 500% Elongation at Break Before Ageing)	-	500	-
5.3 and Table 2( Tensile StrengthAfter Accelerated Ageing)	-	750	-
5.3 and Table 2( Elongation at Break After Accelerated Ageing)	-	750	-
5.5(Airtight Test)	-	750	-

31 Dec, 2026

-
-

Bureau of Indian Standards

The National Standards Body of India

CHOKSI LABORATORIES LIMITED INDORE

Survey No. 9/1 , Balaji Tusiyana Industrial Estate , Kumedi, indore, Indore, Madhya Pradesh, 452010

8770896041 qa.indore@choksilab.com

Scope List