BIS - LIMS (Laboratory Information Management System)

TCR ENGINEERING SERVICES PVT.LTD.

VKB HOUSE PLOT NO. EL-182 MIDC TTC ELECTRONIC ZONE MAHAPE NAVI MUMBAI, NAVI MUMBAI, Thane, Maharashtra, 400710

9833007181 sales@tcreng.com

Scope List

Reset

18 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 2501 (1995)

Solid drawn copper tubesfor general engineering purposes - Specification (Third Revision)

12400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.5(Grades)	-	3000	10 % Discount to BIS on total invoiced value
Cl. No.6(CONDITION)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 7(FREEDOM FROM DEFECTS)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.1(Dimensions)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.2(Tolerances)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 9(CHEMICAL COMPOSITION)	-	3000	10 % Discount to BIS on total invoiced value
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.3(Drift Expanding Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.4(Non-Destructive Testing)	-	1500	10 % Discount to BIS on total invoiced value
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 13(Marking)	-	500	10 % Discount to BIS on total invoiced value
10.6(Hydrogen Embrittlement Test)	-	4000	10 % Discount to BIS on total invoiced value
Cl. No.5(Grades)	-	3000	10 % Discount to BIS on total invoiced value
Cl. No.6(CONDITION)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 7(FREEDOM FROM DEFECTS)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.1(Dimensions)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.2(Tolerances)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 9(CHEMICAL COMPOSITION)	-	3000	10 % Discount to BIS on total invoiced value
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.3(Drift Expanding Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.4(Non-Destructive Testing)	-	1500	10 % Discount to BIS on total invoiced value
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 13(Marking)	-	500	10 % Discount to BIS on total invoiced value
10.6(Hydrogen Embrittlement Test)	-	4000	10 % Discount to BIS on total invoiced value
Cl. No.5(Grades)	-	500	10 % Discount to BIS on total invoiced value
Cl. No.6(CONDITION)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 7(FREEDOM FROM DEFECTS)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.1(Dimensions)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.2(Tolerances)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 9(CHEMICAL COMPOSITION)	-	3000	10 % Discount to BIS on total invoiced value
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.3(Drift Expanding Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.4(Non-Destructive Testing)	-	1500	10 % Discount to BIS on total invoiced value
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 13(Marking)	-	500	10 % Discount to BIS on total invoiced value
10.6(Hydrogen Embrittlement Test)	-	4000	10 % Discount to BIS on total invoiced value

Complete

31 Dec, 2026

-
Included.w.e.f.22.01.2025 Exclusion Cl. No. 10.4 (Non-Destructive Testing) (Optional test)

IS 10773 (1995)

Wrought copper tubes for refrigeration and air - Conditioning purposes - Specification (First Revision)

13600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Freedom from defect)	-	500	10 % Discount to BIS on total invoiced value
8(Dimension and Tolerance)	-	500	10 % Discount to BIS on total invoiced value
9.1 - 1(Copper)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Arsenic)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Iron)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Lead)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Nickel)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Tin)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Phosphorus)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Total impurities)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Manganese)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Aluminium)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Zinc)	-	3000	10 % Discount to BIS on total invoiced value
10.1.1 - 2(Tensile Test)	-	1200	10 % Discount to BIS on total invoiced value
10.1.1 - 2(0.2 Proof stress)	-	1200	10 % Discount to BIS on total invoiced value
10.1.1 - 2(Percentage elongation on 50mm gauge length)	-	1200	10 % Discount to BIS on total invoiced value
10.2(Flattening Test)	-	500	10 % Discount to BIS on total invoiced value
10.3(Drift Expanding Test)	-	500	10 % Discount to BIS on total invoiced value
10.4.2(Hydrostatic Test)	-	1500	10 % Discount to BIS on total invoiced value
10.4.3(Pneumatic Test)	-	1500	10 % Discount to BIS on total invoiced value
7(Freedom from defect)	-	500	10 % Discount to BIS on total invoiced value
8(Dimension and Tolerance)	-	500	10 % Discount to BIS on total invoiced value
9.1 - 1(Copper)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Arsenic)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Iron)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Lead)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Nickel)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Tin)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Phosphorus)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Total impurities)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Manganese)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Aluminium)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Zinc)	-	3000	10 % Discount to BIS on total invoiced value
10.1.1 - 2(Tensile Test)	-	1200	10 % Discount to BIS on total invoiced value
10.1.1 - 2(0.2 Proof stress)	-	1200	10 % Discount to BIS on total invoiced value
10.1.1 - 2(Percentage elongation on 50mm gauge length)	-	1200	10 % Discount to BIS on total invoiced value
10.2(Flattening Test)	-	500	10 % Discount to BIS on total invoiced value
10.3(Drift Expanding Test)	-	500	10 % Discount to BIS on total invoiced value
10.4.2(Hydrostatic Test)	-	1500	10 % Discount to BIS on total invoiced value
10.4.3(Pneumatic Test)	-	1500	10 % Discount to BIS on total invoiced value
10.5(Microscopic Examination)	-	1200	10 % Discount to BIS on total invoiced value
10.6(Hydrogen Embrittlement Test)	-	4000	10 % Discount to BIS on total invoiced value
7(Freedom from defect)	-	500	10 % Discount to BIS on total invoiced value
8(Dimension and Tolerance)	-	500	10 % Discount to BIS on total invoiced value
9.1 - 1(Copper)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Arsenic)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Iron)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Lead)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Nickel)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Tin)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Phosphorus)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Total impurities)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Manganese)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Aluminium)	-	3000	10 % Discount to BIS on total invoiced value
9.1 - 1(Zinc)	-	3000	10 % Discount to BIS on total invoiced value
10.1.1 - 2(Tensile Test)	-	1200	10 % Discount to BIS on total invoiced value
10.1.1 - 2(0.2 Proof stress)	-	1200	10 % Discount to BIS on total invoiced value
10.1.1 - 2(Percentage elongation on 50mm gauge length)	-	1200	10 % Discount to BIS on total invoiced value
10.2(Flattening Test)	-	500	10 % Discount to BIS on total invoiced value
10.3(Drift Expanding Test)	-	500	10 % Discount to BIS on total invoiced value
10.4.2(Hydrostatic Test)	-	1500	10 % Discount to BIS on total invoiced value
10.4.3(Pneumatic Test)	-	1500	10 % Discount to BIS on total invoiced value
10.5(Microscopic Examination)	-	1200	10 % Discount to BIS on total invoiced value
10.6(Hydrogen Embrittlement Test)	-	4000	10 % Discount to BIS on total invoiced value
11.1(Residue Test Or cleanliness test)	-	1200	10 % Discount to BIS on total invoiced value
Cl-11.2(Residue Test Or cleanliness test)	-	1200	10 % Discount to BIS on total invoiced value

Complete

31 Dec, 2026

-
Included w.e.f. 27.08.2024 Exclusion: Cl.10.4.1 (Eddy Current Test), Cl.10.4.2 (Hydrostatic Test)

IS 16651 (2017)

High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement - Specification

2146445 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.4(Surface Quality)	-	700	10 % Discount to BIS on total invoiced value
Cl 5.1(Grade)	-	1020	10 % Discount to BIS on total invoiced value
Cl 5.2(Deformations and Surface Characteristics)	-	700	10 % Discount to BIS on total invoiced value
Cl 5.2(Deformations and Surface Characteristics)	-	700	10 % Discount to BIS on total invoiced value
Cl 5.3(Longitudinal ribs)	-	700	10 % Discount to BIS on total invoiced value
Cl 5.7(Pull out test)	-	35000	10 % Discount to BIS on total invoiced value
Cl 6.1(Nominal size)	-	700	10 % Discount to BIS on total invoiced value
Cl 7.2 / Table 3(Nominal mass)	-	700	10 % Discount to BIS on total invoiced value
Cl 8.2 / Table 5(Physical Properties)	-	750	10 % Discount to BIS on total invoiced value
Cl 8.2 / Table 5(Physical Properties)	-	750	10 % Discount to BIS on total invoiced value
Cl 8.2 / Table 5(Physical Properties)	-	750	10 % Discount to BIS on total invoiced value
Cl 8.2 / Table 5(Physical Properties)	-	750	10 % Discount to BIS on total invoiced value
Cl 8.3(Bend test)	-	150	10 % Discount to BIS on total invoiced value
Cl 8.3(Rebend test)	-	250	10 % Discount to BIS on total invoiced value
Cl 8.4(Bond Strength)	-	750	10 % Discount to BIS on total invoiced value
Cl 8.5(Fatigue Test)	-	2102375	COST FOR SET OF 5 SPECIMEN 13,85,000 cost (2,77,0005nos.) UPTO 16 mm reinforcement bar 14,70,000 cost (2,94,0005nos.) UPTO 25 mm reinforcement bar 21,02,375 (4,20,475*5nos.) for 32 mm reinforcement bar
Cl 8.6(Charpy Impact Test)	-	1700	10 % Discount to BIS on total invoiced value
Cl 8.7(Inter-Granular Corrosion Test)	-	4500	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(CARBON)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(SULPHUR)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(PHOSPHURS)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(MANGANESE)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(NITROGEN)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(SILICON)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(ALUMINIUM)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(CHROMIUM)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(COPPER)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(MOLYBDENUM)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(NICKEL)	-	1020	10 % Discount to BIS on total invoiced value
4.1(Designation)	-	700	10 % Discount to BIS on total invoiced value
4.2(Manufacture)	-	700	10 % Discount to BIS on total invoiced value
4.3(Chemical Composition)	-	1020	10 % Discount to BIS on total invoiced value
4.4(Surface Quality)	-	700	10 % Discount to BIS on total invoiced value
5(Requirements for Bond)	-	700	10 % Discount to BIS on total invoiced value
6.2(The values for the nominal cross-sectional area)	-	700	10 % Discount to BIS on total invoiced value
6.3(Effective Cross-Sectional Area and Mass of Deformed Bars and Wires)	-	700	10 % Discount to BIS on total invoiced value
7.1(Specified Lengths)	-	700	10 % Discount to BIS on total invoiced value
7.2(Nominal Mass)	-	700	10 % Discount to BIS on total invoiced value
8.2(Tensile Properties)	-	750	10 % Discount to BIS on total invoiced value
8.3(Bend and Rebend Properties)	-	700	10 % Discount to BIS on total invoiced value
8.4(Bond Strength)	-	700	10 % Discount to BIS on total invoiced value
8.5(Fatigue Test)	-	2102375	Cost for set of 5 specimens 13,85,000 cost (2,77,0005nos.) UPTO 16 mm reinforcement bar 14,70,000 cost (2,94,0005nos.) UPTO 25 mm reinforcement bar 21,02,375 (4,20,475*5nos.) for 32 mm reinforcement bar
8.6(Charpy Impact Test)	-	1700	10 % Discount to BIS on total invoiced value
8.7(Inter-Granular Corrosion Test)	-	4500	10 % Discount to BIS on total invoiced value
9.1(Selection and Preparation of Test Sample)	-	700	10 % Discount to BIS on total invoiced value
9.2(Tensile Test)	-	750	10 % Discount to BIS on total invoiced value
9.3(Bend Test)	-	150	10 % Discount to BIS on total invoiced value
9.4(Rebend Test)	-	250	10 % Discount to BIS on total invoiced value
9.5(Retests)	-	1020	10 % Discount to BIS on total invoiced value
10(Routine Inspection and Testing facilities)	-	1020	10 % Discount to BIS on total invoiced value
11.1(General Requirements)	-	1020	10 % Discount to BIS on total invoiced value
11.4(Manufacturer’s Certificate)	-	700	10 % Discount to BIS on total invoiced value
12(Identification and Marking)	-	700	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(CARBON)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(SULPHUR)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(PHOSPHURS)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(MANGANESE)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(NITROGEN)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(SILICON)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(COPPER)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(CHROMIUM)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(NICKEL)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(MOLYBDENUM)	-	1020	10 % Discount to BIS on total invoiced value
Cl 4.4(Surface Quality)	-	700	10 % Discount to BIS on total invoiced value
Cl 5.1(Grade)	-	700	10 % Discount to BIS on total invoiced value
Cl 5.2(Deformations and Surface Characteristics)	-	700	10 % Discount to BIS on total invoiced value
Cl 5.2(Deformations and Surface Characteristics)	-	700	10 % Discount to BIS on total invoiced value
Cl 5.3(Longitudinal ribs)	-	700	10 % Discount to BIS on total invoiced value
Cl 5.7(Pull out test)	-	35000	10 % Discount to BIS on total invoiced value
Cl 6.1(Nominal size)	-	700	10 % Discount to BIS on total invoiced value
Cl 7.2 / Table 3(Nominal mass)	-	700	10 % Discount to BIS on total invoiced value
Cl 8.2 / Table 5(Physical Properties)	-	750	10 % Discount to BIS on total invoiced value
Cl 8.2 / Table 5(Physical Properties)	-	750	10 % Discount to BIS on total invoiced value
Cl 8.2 / Table 5(Physical Properties)	-	750	10 % Discount to BIS on total invoiced value
Cl 8.2 / Table 5(Physical Properties)	-	750	10 % Discount to BIS on total invoiced value
Cl 8.3(Bend test)	-	150	10 % Discount to BIS on total invoiced value
Cl 8.3(Rebend test)	-	250	10 % Discount to BIS on total invoiced value
Cl 8.4(Bond Strength)	-	700	10 % Discount to BIS on total invoiced value
Cl 8.5(Fatigue Test)	-	2102375	Cost for set of 5 specimens 13,85,000 cost (2,77,0005nos.) UPTO 16 mm reinforcement bar 14,70,000 cost (2,94,0005nos.) UPTO 25 mm reinforcement bar 21,02,375 (4,20,475*5nos.) for 32 mm reinforcement bar
Cl 8.6(Charpy Impact Test)	-	1700	10 % Discount to BIS on total invoiced value
Cl 8.7(Inter-Granular Corrosion Test)	-	4500	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(CARBON)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(SULPHUR)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(PHOSPHURS)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(MANGANESE)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(NITROGEN)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(SILICON)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(ALUMINIUM)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(CHROMIUM)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(COPPER)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(MOLYBDENUM)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(NICKEL)	-	1020	10 % Discount to BIS on total invoiced value
4.1(Designation)	-	700	10 % Discount to BIS on total invoiced value
4.2(Manufacture)	-	700	10 % Discount to BIS on total invoiced value
4.3(Chemical Composition)	-	1020	10 % Discount to BIS on total invoiced value
4.4(Surface Quality)	-	700	10 % Discount to BIS on total invoiced value
5(Requirements for Bond)	-	700	10 % Discount to BIS on total invoiced value
6.2(The values for the nominal cross-sectional area)	-	700	10 % Discount to BIS on total invoiced value
6.3(Effective Cross-Sectional Area and Mass of Deformed Bars and Wires)	-	700	10 % Discount to BIS on total invoiced value
7.1(Specified Lengths)	-	700	10 % Discount to BIS on total invoiced value
7.2(Nominal Mass)	-	700	10 % Discount to BIS on total invoiced value
8.2(Tensile Properties)	-	750	10 % Discount to BIS on total invoiced value
8.3(Bend and Rebend Properties)	-	700	10 % Discount to BIS on total invoiced value
8.4(Bond Strength)	-	750	10 % Discount to BIS on total invoiced value
8.5(Fatigue Test)	-	2102375	Cost for set of 5 specimen 13,85,000 cost (2,77,0005nos.) UPTO 16 mm reinforcement bar 14,70,000 cost (2,94,0005nos.) UPTO 25 mm reinforcement bar 21,02,375 (4,20,475*5nos.) for 32 mm reinforcement bar
8.6(Charpy Impact Test)	-	1700	10 % Discount to BIS on total invoiced value
8.7(Inter-Granular Corrosion Test)	-	4500	10 % Discount to BIS on total invoiced value
9.1(Selection and Preparation of Test Sample)	-	700	10 % Discount to BIS on total invoiced value
9.2(Tensile Test)	-	750	10 % Discount to BIS on total invoiced value
9.3(Bend Test)	-	150	10 % Discount to BIS on total invoiced value
9.4(Rebend Test)	-	250	10 % Discount to BIS on total invoiced value
9.5(Retests)	-	1020	10 % Discount to BIS on total invoiced value
10(Routine Inspection and Testing facilities)	-	700	10 % Discount to BIS on total invoiced value
11.1(General Requirements)	-	700	10 % Discount to BIS on total invoiced value
11.4(Manufacturer’s Certificate)	-	700	10 % Discount to BIS on total invoiced value
12(Identification and Marking)	-	700	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(CARBON)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(SULPHUR)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(PHOSPHURS)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(MANGANESE)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(NITROGEN)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(SILICON)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(COPPER)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(CHROMIUM)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(NICKEL)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(MOLYBDENUM)	-	1020	10 % Discount to BIS on total invoiced value
Cl 4.4(Surface Quality)	-	700	10 % Discount to BIS on total invoiced value
Cl 5.1(Grade)	-	1020	10 % Discount to BIS on total invoiced value
Cl 5.2(Deformations and Surface Characteristics)	-	700	10 % Discount to BIS on total invoiced value
Cl 5.2(Deformations and Surface Characteristics)	-	700	10 % Discount to BIS on total invoiced value
Cl 5.3(Longitudinal ribs)	-	700	10 % Discount to BIS on total invoiced value
Cl 5.7(Pull out test)	-	35000	10 % Discount to BIS on total invoiced value
Cl 6.1(Nominal size)	-	700	10 % Discount to BIS on total invoiced value
Cl 7.2 / Table 3(Nominal mass)	-	700	10 % Discount to BIS on total invoiced value
Cl 8.2 / Table 5(Physical Properties)	-	700	10 % Discount to BIS on total invoiced value
Cl 8.2 / Table 5(Physical Properties)	-	700	10 % Discount to BIS on total invoiced value
Cl 8.2 / Table 5(Physical Properties)	-	700	10 % Discount to BIS on total invoiced value
Cl 8.2 / Table 5(Physical Properties)	-	700	10 % Discount to BIS on total invoiced value
Cl 8.3(Bend test)	-	150	10 % Discount to BIS on total invoiced value
Cl 8.3(Rebend test)	-	250	10 % Discount to BIS on total invoiced value
Cl 8.4(Bond Strength)	-	750	10 % Discount to BIS on total invoiced value
Cl 8.5(Fatigue Test)	-	2102375	COST FOR SET OF 5 SPECIMEN 13,85,000 cost (2,77,0005nos.) UPTO 16 mm reinforcement bar 14,70,000 cost (2,94,0005nos.) UPTO 25 mm reinforcement bar 21,02,375 (4,20,475*5nos.) for 32 mm reinforcement bar
Cl 8.6(Charpy Impact Test)	-	1700	10 % Discount to BIS on total invoiced value
Cl 8.7(Inter-Granular Corrosion Test)	-	4500	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(CARBON)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(SULPHUR)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(PHOSPHURS)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(MANGANESE)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(NITROGEN)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(SILICON)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(ALUMINIUM)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(CHROMIUM)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(COPPER)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(MOLYBDENUM)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(NICKEL)	-	1020	10 % Discount to BIS on total invoiced value
4.1(Designation)	-	700	10 % Discount to BIS on total invoiced value
4.2(Manufacture)	-	700	10 % Discount to BIS on total invoiced value
4.3(Chemical Composition)	-	1020	10 % Discount to BIS on total invoiced value
4.4(Surface Quality)	-	700	10 % Discount to BIS on total invoiced value
5(Requirements for Bond)	-	750	10 % Discount to BIS on total invoiced value
6.2(The values for the nominal cross-sectional area)	-	700	10 % Discount to BIS on total invoiced value
6.3(Effective Cross-Sectional Area and Mass of Deformed Bars and Wires)	-	700	10 % Discount to BIS on total invoiced value
7.1(Specified Lengths)	-	700	10 % Discount to BIS on total invoiced value
7.2(Nominal Mass)	-	700	10 % Discount to BIS on total invoiced value
8.2(Tensile Properties)	-	750	10 % Discount to BIS on total invoiced value
8.3(Bend and Rebend Properties)	-	400	10 % Discount to BIS on total invoiced value
8.4(Bond Strength)	-	750	10 % Discount to BIS on total invoiced value
8.5(Fatigue Test)	-	2102375	COST FOR SET OF 5 SPECIMEN 13,85,000 cost (2,77,0005nos.) UPTO 16 mm reinforcement bar 14,70,000 cost (2,94,0005nos.) UPTO 25 mm reinforcement bar 21,02,375 (4,20,475*5nos.) for 32 mm reinforcement bar
8.6(Charpy Impact Test)	-	1700	10 % Discount to BIS on total invoiced value
8.7(Inter-Granular Corrosion Test)	-	4500	10 % Discount to BIS on total invoiced value
9.1(Selection and Preparation of Test Sample)	-	700	10 % Discount to BIS on total invoiced value
9.2(Tensile Test)	-	750	10 % Discount to BIS on total invoiced value
9.3(Bend Test)	-	150	10 % Discount to BIS on total invoiced value
9.4(Rebend Test)	-	250	10 % Discount to BIS on total invoiced value
9.5(Retests)	-	1020	10 % Discount to BIS on total invoiced value
10(Routine Inspection and Testing facilities)	-	1020	10 % Discount to BIS on total invoiced value
11.1(General Requirements)	-	1020	10 % Discount to BIS on total invoiced value
11.4(Manufacturer’s Certificate)	-	700	10 % Discount to BIS on total invoiced value
12(Identification and Marking)	-	700	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(CARBON)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(SULPHUR)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(PHOSPHURS)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(MANGANESE)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(NITROGEN)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(SILICON)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(COPPER)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(CHROMIUM)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(NICKEL)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(MOLYBDENUM)	-	1020	10 % Discount to BIS on total invoiced value
Cl 4.4(Surface Quality)	-	700	10 % Discount to BIS on total invoiced value
Cl 5.1(Grade)	-	1020	10 % Discount to BIS on total invoiced value
Cl 5.2(Deformations and Surface Characteristics)	-	700	10 % Discount to BIS on total invoiced value
Cl 5.2(Deformations and Surface Characteristics)	-	700	10 % Discount to BIS on total invoiced value
Cl 5.3(Longitudinal ribs)	-	700	10 % Discount to BIS on total invoiced value
Cl 5.7(Pull out test)	-	35000	10 % Discount to BIS on total invoiced value
Cl 6.1(Nominal size)	-	700	10 % Discount to BIS on total invoiced value
Cl 7.2 / Table 3(Nominal mass)	-	700	10 % Discount to BIS on total invoiced value
Cl 8.2 / Table 5(Physical Properties)	-	700	10 % Discount to BIS on total invoiced value
Cl 8.2 / Table 5(Physical Properties)	-	700	10 % Discount to BIS on total invoiced value
Cl 8.2 / Table 5(Physical Properties)	-	700	10 % Discount to BIS on total invoiced value
Cl 8.2 / Table 5(Physical Properties)	-	700	10 % Discount to BIS on total invoiced value
Cl 8.3(Bend test)	-	150	10 % Discount to BIS on total invoiced value
Cl 8.3(Rebend test)	-	250	10 % Discount to BIS on total invoiced value
Cl 8.4(Bond Strength)	-	700	10 % Discount to BIS on total invoiced value
Cl 8.5(Fatigue Test)	-	2102375	10 % Discount to BIS on total invoiced value
Cl 8.6(Charpy Impact Test)	-	700	10 % Discount to BIS on total invoiced value
Cl 8.7(Inter-Granular Corrosion Test)	-	4500	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(CARBON)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(SULPHUR)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(PHOSPHURS)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(MANGANESE)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(NITROGEN)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(SILICON)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(ALUMINIUM)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(CHROMIUM)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(COPPER)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(MOLYBDENUM)	-	1020	10 % Discount to BIS on total invoiced value
Clause-4.3.1, Table- 1(NICKEL)	-	1020	10 % Discount to BIS on total invoiced value
4.1(Designation)	-	1020	10 % Discount to BIS on total invoiced value
4.2(Manufacture)	-	1020	10 % Discount to BIS on total invoiced value
4.3(Chemical Composition)	-	1020	10 % Discount to BIS on total invoiced value
4.4(Surface Quality)	-	1020	10 % Discount to BIS on total invoiced value
5(Requirements for Bond)	-	700	10 % Discount to BIS on total invoiced value
6.2(The values for the nominal cross-sectional area)	-	750	10 % Discount to BIS on total invoiced value
6.3(Effective Cross-Sectional Area and Mass of Deformed Bars and Wires)	-	700	10 % Discount to BIS on total invoiced value
7.1(Specified Lengths)	-	700	10 % Discount to BIS on total invoiced value
7.2(Nominal Mass)	-	700	10 % Discount to BIS on total invoiced value
8.2(Tensile Properties)	-	750	10 % Discount to BIS on total invoiced value
8.3(Bend and Rebend Properties)	-	150	10 % Discount to BIS on total invoiced value
8.4(Bond Strength)	-	700	10 % Discount to BIS on total invoiced value
8.5(Fatigue Test)	-	2102375	10 % Discount to BIS on total invoiced value
8.6(Charpy Impact Test)	-	1700	10 % Discount to BIS on total invoiced value
8.7(Inter-Granular Corrosion Test)	-	4500	10 % Discount to BIS on total invoiced value
9.1(Selection and Preparation of Test Sample)	-	700	10 % Discount to BIS on total invoiced value
9.2(Tensile Test)	-	750	10 % Discount to BIS on total invoiced value
9.3(Bend Test)	-	150	10 % Discount to BIS on total invoiced value
9.4(Rebend Test)	-	250	10 % Discount to BIS on total invoiced value
9.5(Retests)	-	1020	10 % Discount to BIS on total invoiced value
10(Routine Inspection and Testing facilities)	-	700	10 % Discount to BIS on total invoiced value
11.1(General Requirements)	-	700	10 % Discount to BIS on total invoiced value
11.4(Manufacturer’s Certificate)	-	700	10 % Discount to BIS on total invoiced value
12(Identification and Marking)	-	700	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(CARBON)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(SULPHUR)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(PHOSPHURS)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(MANGANESE)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(NITROGEN)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(SILICON)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(COPPER)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(CHROMIUM)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(NICKEL)	-	1020	10 % Discount to BIS on total invoiced value
Table-1, Clause - 4.3.1(MOLYBDENUM)	-	1020	10 % Discount to BIS on total invoiced value
Cl 4.4(Surface Quality)	-	-	-
Cl 5.1(Grade)	-	-	-
Cl 5.2(Deformations and Surface Characteristics)	-	-	-
Cl 5.2(Deformations and Surface Characteristics)	-	-	-
Cl 5.3(Longitudinal ribs)	-	-	-
Cl 5.7(Pull out test)	-	-	-
Cl 6.1(Nominal size)	-	-	-
Cl 7.2 / Table 3(Nominal mass)	-	-	-
Cl 8.2 / Table 5(Physical Properties)	-	-	-
Cl 8.2 / Table 5(Physical Properties)	-	-	-
Cl 8.2 / Table 5(Physical Properties)	-	-	-
Cl 8.2 / Table 5(Physical Properties)	-	-	-
Cl 8.3(Bend test)	-	-	-
Cl 8.3(Rebend test)	-	-	-
Cl 8.4(Bond Strength)	-	-	-
Cl 8.5(Fatigue Test)	-	-	-
Cl 8.6(Charpy Impact Test)	-	-	-
Cl 8.7(Inter-Granular Corrosion Test)	-	-	-
Clause-4.3.1, Table- 1(CARBON)	-	-	-
Clause-4.3.1, Table- 1(SULPHUR)	-	-	-
Clause-4.3.1, Table- 1(PHOSPHURS)	-	-	-
Clause-4.3.1, Table- 1(MANGANESE)	-	-	-
Clause-4.3.1, Table- 1(NITROGEN)	-	-	-
Clause-4.3.1, Table- 1(SILICON)	-	-	-
Clause-4.3.1, Table- 1(ALUMINIUM)	-	-	-
Clause-4.3.1, Table- 1(CHROMIUM)	-	-	-
Clause-4.3.1, Table- 1(COPPER)	-	-	-
Clause-4.3.1, Table- 1(MOLYBDENUM)	-	-	-
Clause-4.3.1, Table- 1(NICKEL)	-	-	-
4.1(Designation)	-	-	-
4.2(Manufacture)	-	-	-
4.3(Chemical Composition)	-	-	-
4.4(Surface Quality)	-	-	-
5(Requirements for Bond)	-	-	-
6.2(The values for the nominal cross-sectional area)	-	-	-
6.3(Effective Cross-Sectional Area and Mass of Deformed Bars and Wires)	-	-	-
7.1(Specified Lengths)	-	-	-
7.2(Nominal Mass)	-	-	-
8.2(Tensile Properties)	-	-	-
8.3(Bend and Rebend Properties)	-	-	-
8.4(Bond Strength)	-	-	-
8.5(Fatigue Test)	-	-	-
8.6(Charpy Impact Test)	-	-	-
8.7(Inter-Granular Corrosion Test)	-	-	-
9.1(Selection and Preparation of Test Sample)	-	-	-
9.2(Tensile Test)	-	-	-
9.3(Bend Test)	-	-	-
9.4(Rebend Test)	-	-	-
9.5(Retests)	-	-	-
10(Routine Inspection and Testing facilities)	-	-	-
11.1(General Requirements)	-	-	-
11.4(Manufacturer’s Certificate)	-	-	-
12(Identification and Marking)	-	-	-
Table-1, Clause - 4.3.1(CARBON)	-	-	-
Table-1, Clause - 4.3.1(SULPHUR)	-	-	-
Table-1, Clause - 4.3.1(PHOSPHURS)	-	-	-
Table-1, Clause - 4.3.1(MANGANESE)	-	-	-
Table-1, Clause - 4.3.1(NITROGEN)	-	-	-
Table-1, Clause - 4.3.1(SILICON)	-	-	-
Table-1, Clause - 4.3.1(COPPER)	-	-	-
Table-1, Clause - 4.3.1(CHROMIUM)	-	-	-
Table-1, Clause - 4.3.1(NICKEL)	-	-	-
Table-1, Clause - 4.3.1(MOLYBDENUM)	-	-	-

Complete

31 Dec, 2026

-
Included.w.e.f.22.01.2025

IS 15769 (2008)

Flux cored (Tubular) electrodes for gas shielded and self - Shielded metal welding of carbon or carbon - Manganese steel

24600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Radiographic Soundness Test)	-	24600	10 % Discount to BIS on total invoiced value
5.3 (Table No.- 1)(Tensile Test(T.S., Y.S. & El), Mpa-IS 1608)	-	24600	10 % Discount to BIS on total invoiced value
5.4 (Table No.- 2)(Impact Test,J- IS 1757)	-	24600	10 % Discount to BIS on total invoiced value
5.5 (Table No.- 1)(Transverse Tensile Test,Mpa (T.S., Y.S. & El))	-	24600	10 % Discount to BIS on total invoiced value
5.6(Longitudinal Bend Test)	-	24600	10 % Discount to BIS on total invoiced value
5.7(Diffusible Hydrogen Test,ml/100g- IS 11802)	-	24600	10 % Discount to BIS on total invoiced value
5.8 (Table No.- 15)(Chemical Composition,%)	-	24600	10 % Discount to BIS on total invoiced value
5.2(Radiographic Soundness Test)	-	24600	10 % Discount to BIS on total invoiced value
5.3 (Table No.- 1)(Tensile Test(T.S., Y.S. & El), Mpa-IS 1608)	-	24600	10 % Discount to BIS on total invoiced value
5.4 (Table No.- 2)(Impact Test,J- IS 1757)	-	24600	10 % Discount to BIS on total invoiced value
5.5 (Table No.- 1)(Transverse Tensile Test,Mpa (T.S., Y.S. & El))	-	24600	10 % Discount to BIS on total invoiced value
5.6(Longitudinal Bend Test)	-	24600	10 % Discount to BIS on total invoiced value
5.7(Diffusible Hydrogen Test,ml/100g- IS 11802)	-	24600	10 % Discount to BIS on total invoiced value
5.8 (Table No.- 15)(Chemical Composition,%)	-	24600	10 % Discount to BIS on total invoiced value

Complete

31 Dec, 2026

-
Included w.e.f. 27.08.2024

IS 1395 (1982)

Specification for low and medium alloy steel covered electrodes for manual metal arc welding (Third Revision

25820 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Size and tolerances)	-	25820	10 % Discount to BIS on total invoiced value
6.1 ,6.2(General requirement)	-	25820	10 % Discount to BIS on total invoiced value
6.3.1, 6.3.2(Covering)	-	25820	10 % Discount to BIS on total invoiced value
10.1.5(Moisture test requirement)	-	25820	10 % Discount to BIS on total invoiced value
10.1.2(Tensile test and ductility)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Carbon)	-	27900	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Manganese Percent)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Phosphorus)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Sulphur)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Silicon)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Nickel)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Chromium)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Molybdenum)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Carbon Equivalent)	-	25820	10 % Discount to BIS on total invoiced value
Cl 12.2(Copper)	-	25820	10 % Discount to BIS on total invoiced value
Cl 12.2(Aluminium)	-	25820	10 % Discount to BIS on total invoiced value
Cl 12.2(Nitrogen)	-	25820	10 % Discount to BIS on total invoiced value
5(Size and tolerances)	-	25820	10 % Discount to BIS on total invoiced value
6.1 ,6.2(General requirement)	-	25820	10 % Discount to BIS on total invoiced value
6.3.1, 6.3.2(Covering)	-	25820	10 % Discount to BIS on total invoiced value
10.1.5(Moisture test requirement)	-	25820	10 % Discount to BIS on total invoiced value
10.1.2(Tensile test and ductility)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Carbon)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Manganese Percent)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Phosphorus)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Sulphur)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Silicon)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Nickel)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Chromium)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Molybdenum)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Carbon Equivalent)	-	25820	10 % Discount to BIS on total invoiced value
Cl 12.2(Copper)	-	25820	10 % Discount to BIS on total invoiced value
Cl 12.2(Aluminium)	-	25820	10 % Discount to BIS on total invoiced value
Cl 12.2(Nitrogen)	-	25820	10 % Discount to BIS on total invoiced value
5(Size and tolerances)	-	25820	10 % Discount to BIS on total invoiced value
6.1 ,6.2(General requirement)	-	25820	10 % Discount to BIS on total invoiced value
6.3.1, 6.3.2(Covering)	-	25820	10 % Discount to BIS on total invoiced value
10.1.5(Moisture test requirement)	-	25820	10 % Discount to BIS on total invoiced value
10.1.2(Tensile test and ductility)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Carbon)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Manganese Percent)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Phosphorus)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Sulphur)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Silicon)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Nickel)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Chromium)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Molybdenum)	-	25820	10 % Discount to BIS on total invoiced value
Cl 4.1, Table1(Carbon Equivalent)	-	25820	-
Cl 12.2(Copper)	-	25820	-
Cl 12.2(Aluminium)	-	25820	-
Cl 12.2(Nitrogen)	-	25820	10 % Discount to BIS on total invoiced value
Cl-10.1.1(Radiographic Requirements)	-	25820	10 % Discount to BIS on total invoiced value
Cl-10.1.3(Impact Requirements -)	-	25820	10 % Discount to BIS on total invoiced value
Cl-10.1.4(Fillet Weld Test Requirements)	-	25820	10 % Discount to BIS on total invoiced value
Cl-10.1.4.1(Convexity)	-	25820	10 % Discount to BIS on total invoiced value
Cl-10.1.4.2(Incomplete fusion)	-	25820	10 % Discount to BIS on total invoiced value

Complete

31 Dec, 2026

-
Included w.e.f 10.02.2025

IS 17876 (2022)

Stainless steel welded pipes and tubes for general service

17300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	17300	10 % Discount to BIS on total invoiced value
10.1 (Table No.- 4)(Tensile Test,Mpa)	-	17300	10 % Discount to BIS on total invoiced value
11(Transverse Tension Test,%)	-	17300	10 % Discount to BIS on total invoiced value
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	17300	10 % Discount to BIS on total invoiced value
13 (Table No.- 7)(Flange Test-IS 2330)	-	17300	10 % Discount to BIS on total invoiced value
14(Reverse Flattaning Test)	-	17300	10 % Discount to BIS on total invoiced value
15(Flattaning Test-IS 2328)	-	17300	10 % Discount to BIS on total invoiced value
16 (Table No.- 8)(Grain Size,No.-IS 4748)	-	17300	10 % Discount to BIS on total invoiced value
18(Leak Tighteness Test)	-	17300	10 % Discount to BIS on total invoiced value
19("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	17300	10 % Discount to BIS on total invoiced value
22(Workmanship, Finish and Appearance)	-	17300	10 % Discount to BIS on total invoiced value
23(Repair by Welding or Grinding)	-	17300	10 % Discount to BIS on total invoiced value
24 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	17300	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	17300	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	17300	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	17300	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	17300	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	17300	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	17300	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	17300	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	17300	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	17300	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	17300	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	17300	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	17300	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	17300	10 % Discount to BIS on total invoiced value
"Clause 19 IS 10461(Part 1)"(Corrosion Test)	-	17300	10 % Discount to BIS on total invoiced value
Clause 10.1 - Table 4(Tensile Strength)	-	17300	10 % Discount to BIS on total invoiced value
Clause 10.1 - Table 4(Yield Strength)	-	17300	10 % Discount to BIS on total invoiced value
Clause 10.1 - Table 4(Percent Elongation)	-	17300	10 % Discount to BIS on total invoiced value
Clause 11(Transverse Tension Test)	-	17300	10 % Discount to BIS on total invoiced value
Clause 12(Hardness Test)	-	17300	10 % Discount to BIS on total invoiced value
Clause 13(Flange Test)	-	17300	10 % Discount to BIS on total invoiced value
Clause 14(Reverse Flattening Test)	-	17300	10 % Discount to BIS on total invoiced value
Clause 15(Flattening Test)	-	17300	10 % Discount to BIS on total invoiced value
Clause 16(Grain Size)	-	17300	10 % Discount to BIS on total invoiced value
Clause 18()	-	17300	10 % Discount to BIS on total invoiced value
"Clause 19 IS 10461(Part 2)"(Corrosion Test)	-	17300	10 % Discount to BIS on total invoiced value
Clause 22(Workmanship, Finish & Appearance)	-	17300	10 % Discount to BIS on total invoiced value
Clause 24 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	17300	10 % Discount to BIS on total invoiced value
8.1 & 8.2 (Table No.- 1)(Vanadium (V))	-	17300	10 % Discount to BIS on total invoiced value
8.1 & 8.2 (Table No.- 1)(Tungstun (W))	-	17300	10 % Discount to BIS on total invoiced value
8.1 & 8.2 (Table No.- 1)(Tantalum (Ta))	-	17300	10 % Discount to BIS on total invoiced value
12.2(Hardness test)	-	17300	10 % Discount to BIS on total invoiced value
17(Sampling)	-	17300	10 % Discount to BIS on total invoiced value
25(Marking)	-	17300	10 % Discount to BIS on total invoiced value

Complete

31 Dec, 2026

-
Included w.e.f. 27.08.2024 Exclusion: Cl.6.7 Table-7(ii) c (Chromium VI), Cl.20 Eddy current test, Air under water test, Radiographic tests)

IS 17875 (2022)

Stainless Steel seamless pipes and tubes for general service

14100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	14100	10 % Discount to BIS on total invoiced value
10.1 (Table No.- 4)(Tensile Test,Mpa - IS 1608)	-	14100	10 % Discount to BIS on total invoiced value
11(Transverse Tension Test,%)	-	14100	10 % Discount to BIS on total invoiced value
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	14100	10 % Discount to BIS on total invoiced value
13 (Table No.- 7)(Flaring Test)	-	14100	10 % Discount to BIS on total invoiced value
14(Flattaning Test-IS 2328)	-	14100	10 % Discount to BIS on total invoiced value
15.1 (Table No.- 8)(Grain Size,No.-IS 4748)	-	14100	10 % Discount to BIS on total invoiced value
17(Leak Tighteness Test)	-	14100	10 % Discount to BIS on total invoiced value
18("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	14100	10 % Discount to BIS on total invoiced value
21(Workmanship, Finish and Appearance)	-	14100	10 % Discount to BIS on total invoiced value
23 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 18 IS 10461(Part 1)"(Corrosion Test)	-	14100	10 % Discount to BIS on total invoiced value
Clause 10.1 - Table 4(Tensile Strength)	-	14100	10 % Discount to BIS on total invoiced value
Clause 10.1 - Table 4(Percent Elongation)	-	14100	10 % Discount to BIS on total invoiced value
Clause 11(Transverse Tension Test)	-	14100	10 % Discount to BIS on total invoiced value
Clause 12(Hardness Test)	-	14100	10 % Discount to BIS on total invoiced value
Clause 13(Flaring Test)	-	14100	10 % Discount to BIS on total invoiced value
Clause 14(Flattening Test)	-	14100	10 % Discount to BIS on total invoiced value
Clause 15(Grain Size)	-	14100	10 % Discount to BIS on total invoiced value
Clause 17(Leak Tightness Test)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 18 IS 10461(Part 2)"(Corrosion Test)	-	14100	10 % Discount to BIS on total invoiced value
Clause 21(Workmanship, Finish & Appearance)	-	14100	10 % Discount to BIS on total invoiced value
Clause 23 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	14100	10 % Discount to BIS on total invoiced value
10.2(Hardness test IS 1500 (part-1):2019)	-	14100	10 % Discount to BIS on total invoiced value
12.2(Flaring test IS 17878:2022)	-	14100	10 % Discount to BIS on total invoiced value
22(Repair by Welding or Grinding)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	14100	10 % Discount to BIS on total invoiced value
16(Sampling)	-	14100	10 % Discount to BIS on total invoiced value
24(Marking)	-	14100	10 % Discount to BIS on total invoiced value
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	14100	10 % Discount to BIS on total invoiced value
10.1 (Table No.- 4)(Tensile Test,Mpa - IS 1608)	-	14100	10 % Discount to BIS on total invoiced value
11(Transverse Tension Test,%)	-	14100	10 % Discount to BIS on total invoiced value
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	14100	10 % Discount to BIS on total invoiced value
13 (Table No.- 7)(Flaring Test)	-	14100	10 % Discount to BIS on total invoiced value
14(Flattaning Test-IS 2328)	-	14100	10 % Discount to BIS on total invoiced value
15.1 (Table No.- 8)(Grain Size,No.-IS 4748)	-	14100	10 % Discount to BIS on total invoiced value
17(Leak Tighteness Test)	-	14100	10 % Discount to BIS on total invoiced value
18("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	14100	10 % Discount to BIS on total invoiced value
21(Workmanship, Finish and Appearance)	-	14100	10 % Discount to BIS on total invoiced value
23 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 18 IS 10461(Part 1)"(Corrosion Test)	-	14100	10 % Discount to BIS on total invoiced value
Clause 10.1 - Table 4(Tensile Strength)	-	14100	10 % Discount to BIS on total invoiced value
Clause 10.1 - Table 4(Percent Elongation)	-	14100	10 % Discount to BIS on total invoiced value
Clause 11(Transverse Tension Test)	-	14100	10 % Discount to BIS on total invoiced value
Clause 12(Hardness Test)	-	14100	10 % Discount to BIS on total invoiced value
Clause 13(Flaring Test)	-	14100	10 % Discount to BIS on total invoiced value
Clause 14(Flattening Test)	-	14100	10 % Discount to BIS on total invoiced value
Clause 15(Grain Size)	-	14100	10 % Discount to BIS on total invoiced value
Clause 17(Leak Tightness Test)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 18 IS 10461(Part 2)"(Corrosion Test)	-	14100	10 % Discount to BIS on total invoiced value
Clause 21(Workmanship, Finish & Appearance)	-	14100	10 % Discount to BIS on total invoiced value
Clause 23 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	14100	10 % Discount to BIS on total invoiced value
10.2(Hardness test IS 1500 (part-1):2019)	-	14100	10 % Discount to BIS on total invoiced value
12.2(Flaring test IS 17878:2022)	-	14100	10 % Discount to BIS on total invoiced value
22(Repair by Welding or Grinding)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	14100	10 % Discount to BIS on total invoiced value
16(Sampling)	-	14100	10 % Discount to BIS on total invoiced value
24(Marking)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(W)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 1"(Ta)	-	14100	10 % Discount to BIS on total invoiced value
"Clause 8.1 and 8.2 - Table 2"(V)	-	14100	10 % Discount to BIS on total invoiced value

Complete

31 Dec, 2026

-
Included w.e.f. 06.08.2024 Exclusion: 19 (Eddy current test & Air under water)

IS 15103 (2002)

Fire resistant steel - Specification

8100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clauses 6 & 7.1, Table- 1(FR- Fe 410, C)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Si)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Mn)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 410, P)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 410, S)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Cr)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Mo)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 490, C)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 490, Si)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 490, Mn)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 490, P)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 490, S)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 490, Cr)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 490, Mo)	-	8100	10 % Discount to BIS on total invoiced value
Cl 10(Tensile Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 11(Bend Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 12(Impact Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 13(Freedom from Defects)	-	8100	10 % Discount to BIS on total invoiced value
Cl 14(Dimensions & Tolerances)	-	8100	10 % Discount to BIS on total invoiced value
Cl 16(Mass)	-	8100	10 % Discount to BIS on total invoiced value
Cl 6(Grades)	-	8100	10 % Discount to BIS on total invoiced value
Cl 16(Mass)	-	8100	10 % Discount to BIS on total invoiced value
Cl 6(Grades)	-	8100	10 % Discount to BIS on total invoiced value
Cl 10(Tensile Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 11(Bend Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 12(Impact Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 13(Freedom from Defects)	-	8100	10 % Discount to BIS on total invoiced value
Cl 14(Dimensions & Tolerances)	-	8100	10 % Discount to BIS on total invoiced value
Cl 14(Dimensions & Tolerances)	-	8100	10 % Discount to BIS on total invoiced value
Cl 13(Freedom from Defects)	-	8100	10 % Discount to BIS on total invoiced value
Cl 12(Impact Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 11(Bend Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 10(Tensile Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 6(Grades)	-	8100	10 % Discount to BIS on total invoiced value
Cl 6(Grades)	-	8100	10 % Discount to BIS on total invoiced value
Cl 10(Tensile Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 11(Bend Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 12(Impact Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 13(Freedom from Defects)	-	8100	10 % Discount to BIS on total invoiced value
Cl 14(Dimensions & Tolerances)	-	8100	10 % Discount to BIS on total invoiced value
Cl 16(Mass)	-	8100	10 % Discount to BIS on total invoiced value
Cl 16(Mass)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 410, C)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Si)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Mn)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 410, P)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 410, S)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Cr)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Mo)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 490, C)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 490, Si)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 490, Mn)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 490, P)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 490, S)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 490, Cr)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 490, Mo)	-	8100	10 % Discount to BIS on total invoiced value
Cl 10(Tensile Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 11(Bend Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 12(Impact Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 13(Freedom from Defects)	-	8100	10 % Discount to BIS on total invoiced value
Cl 14(Dimensions & Tolerances)	-	8100	10 % Discount to BIS on total invoiced value
Cl 16(Mass)	-	8100	10 % Discount to BIS on total invoiced value
Cl 6(Grades)	-	8100	10 % Discount to BIS on total invoiced value
Cl 16(Mass)	-	8100	10 % Discount to BIS on total invoiced value
Cl 6(Grades)	-	8100	10 % Discount to BIS on total invoiced value
Cl 10(Tensile Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 11(Bend Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 12(Impact Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 13(Freedom from Defects)	-	8100	10 % Discount to BIS on total invoiced value
Cl 14(Dimensions & Tolerances)	-	8100	10 % Discount to BIS on total invoiced value
Cl 14(Dimensions & Tolerances)	-	8100	10 % Discount to BIS on total invoiced value
Cl 13(Freedom from Defects)	-	8100	10 % Discount to BIS on total invoiced value
Cl 12(Impact Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 11(Bend Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 10(Tensile Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 6(Grades)	-	8100	10 % Discount to BIS on total invoiced value
Cl 6(Grades)	-	8100	10 % Discount to BIS on total invoiced value
Cl 10(Tensile Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 11(Bend Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 12(Impact Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 13(Freedom from Defects)	-	8100	10 % Discount to BIS on total invoiced value
Cl 14(Dimensions & Tolerances)	-	8100	10 % Discount to BIS on total invoiced value
Cl 16(Mass)	-	8100	10 % Discount to BIS on total invoiced value
Cl 16(Mass)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 410, C)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Si)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Mn)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 410, P)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 410, S)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Cr)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Mo)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 490, C)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 490, Si)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 490, Mn)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 490, P)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 490, S)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 490, Cr)	-	8100	10 % Discount to BIS on total invoiced value
Clauses 6 & 7.1, Table- 1(FR- Fe 490, Mo)	-	8100	10 % Discount to BIS on total invoiced value
Cl 10(Tensile Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 11(Bend Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 12(Impact Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 13(Freedom from Defects)	-	8100	10 % Discount to BIS on total invoiced value
Cl 14(Dimensions & Tolerances)	-	8100	10 % Discount to BIS on total invoiced value
Cl 16(Mass)	-	8100	10 % Discount to BIS on total invoiced value
Cl 6(Grades)	-	8100	10 % Discount to BIS on total invoiced value
Cl 16(Mass)	-	8100	10 % Discount to BIS on total invoiced value
Cl 6(Grades)	-	8100	10 % Discount to BIS on total invoiced value
Cl 10(Tensile Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 11(Bend Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 12(Impact Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 13(Freedom from Defects)	-	8100	10 % Discount to BIS on total invoiced value
Cl 14(Dimensions & Tolerances)	-	8100	10 % Discount to BIS on total invoiced value
Cl 14(Dimensions & Tolerances)	-	8100	10 % Discount to BIS on total invoiced value
Cl 13(Freedom from Defects)	-	8100	10 % Discount to BIS on total invoiced value
Cl 12(Impact Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 11(Bend Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 10(Tensile Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 6(Grades)	-	8100	10 % Discount to BIS on total invoiced value
Cl 6(Grades)	-	8100	10 % Discount to BIS on total invoiced value
Cl 10(Tensile Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 11(Bend Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 12(Impact Test)	-	8100	10 % Discount to BIS on total invoiced value
Cl 13(Freedom from Defects)	-	8100	10 % Discount to BIS on total invoiced value
Cl 14(Dimensions & Tolerances)	-	8100	10 % Discount to BIS on total invoiced value
Cl 16(Mass)	-	8100	10 % Discount to BIS on total invoiced value
Cl 16(Mass)	-	8100	10 % Discount to BIS on total invoiced value
10, Table 3(Tensile Test ( Ambient Temperature ))	-	8100	10 % Discount to BIS on total invoiced value
10, Table 3(Tensile Test ( Ambient Temperature ))	-	8100	10 % Discount to BIS on total invoiced value
11(Bend Test)	-	8100	10 % Discount to BIS on total invoiced value
12(Impact Test)	-	8100	10 % Discount to BIS on total invoiced value
13(Freedom From Defects)	-	8100	10 % Discount to BIS on total invoiced value
14 , Table 4(Dimensions and Tolerances)	-	8100	10 % Discount to BIS on total invoiced value

Complete

31 Dec, 2026

-
Included w.e.f. 06.08.2024

IS 513 : Part 2 (2016)

Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)

14880 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(CARBON)	-	300	10 % Discount to BIS on total invoiced value
6.0(SULPHUR)	-	300	10 % Discount to BIS on total invoiced value
6.0(PHOSPHORUS)	-	300	10 % Discount to BIS on total invoiced value
6.0(MANGANESE)	-	300	10 % Discount to BIS on total invoiced value
6.0(SILICON)	-	300	10 % Discount to BIS on total invoiced value
6.0(ALUMINIUM)	-	300	10 % Discount to BIS on total invoiced value
6.0(NITROGEN)	-	300	10 % Discount to BIS on total invoiced value
Cl 7(UTM)	-	10080	Tensile test 780/- Bend test 300/- Tensile strain hardening component 9000/-
Cl 8.5(Workmanship)	-	600	10 % Discount to BIS on total invoiced value
Cl 9(Workmanship)	-	300	10 % Discount to BIS on total invoiced value
Cl 10(Length, Width & Thickness)	-	300	10 % Discount to BIS on total invoiced value

Complete

31 Dec, 2026

-
-

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

As per table 2 ,3 & 4

7380 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	480	10 % Discount to BIS on total invoiced value
Cl 9.3(Load In One Direction)	-	420	10 % Discount to BIS on total invoiced value
Cl 8.1(UTM)	-	780	10 % Discount to BIS on total invoiced value
Cl 6.1(Length, Width & Thickness)	-	300	10 % Discount to BIS on total invoiced value
Cl 7.2(Weight)	-	300	10 % Discount to BIS on total invoiced value
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	300	10 % Discount to BIS on total invoiced value
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	300	10 % Discount to BIS on total invoiced value
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	300	10 % Discount to BIS on total invoiced value
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	300	10 % Discount to BIS on total invoiced value
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	300	10 % Discount to BIS on total invoiced value
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	300	10 % Discount to BIS on total invoiced value
Cl 5(Deformations and Surface Characteristics)	-	600	10 % Discount to BIS on total invoiced value
Cl. 4.3(Visual Inspection.)	-	300	10 % Discount to BIS on total invoiced value
4.3(Rolling and cold working of bars/wire)	-	300	10 % Discount to BIS on total invoiced value
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
4.2(Niobium (Nb))	-	300	10 % Discount to BIS on total invoiced value
4.1( Ti)	-	300	10 % Discount to BIS on total invoiced value

Complete

31 Dec, 2026

-
Exclusion : Pull out test, Clause 5.7

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

As per table 1& 4

14100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 18(Weight)	-	300	10 % Discount to BIS on total invoiced value
Cl 15(Length, Width & Thickness)	-	300	10 % Discount to BIS on total invoiced value
Cl 13(Y Groove Cracking Test)	-	8000	10 % Discount to BIS on total invoiced value
Cl 12(Sudden Load Applied)	-	1800	10 % Discount to BIS on total invoiced value
Cl 11.3(Press)	-	420	10 % Discount to BIS on total invoiced value
Cl 10.3(UTM)	-	780	10 % Discount to BIS on total invoiced value
Cl 7(Workmanship)	-	300	10 % Discount to BIS on total invoiced value
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
14.2(Grain Size)	-	900	10 % Discount to BIS on total invoiced value
14.2(Inclusion)	-	2500	10 % Discount to BIS on total invoiced value

Complete

31 Dec, 2026

-
-

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

28220 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(CARBON)	-	300	10 % Discount to BIS on total invoiced value
7.0(SULPHUR)	-	300	10 % Discount to BIS on total invoiced value
7.0(PHOSPHORUS)	-	300	10 % Discount to BIS on total invoiced value
7.0(MANGANESE)	-	300	10 % Discount to BIS on total invoiced value
7.0(SILICON)	-	300	10 % Discount to BIS on total invoiced value
7.0(ALUMINIUM)	-	300	10 % Discount to BIS on total invoiced value
Cl 8(UTM)	-	780	10 % Discount to BIS on total invoiced value
Cl 9(Workmanship)	-	600	10 % Discount to BIS on total invoiced value
Cl 10(Workmanship)	-	300	10 % Discount to BIS on total invoiced value
Cl 11(Length, Width & Thickness)	-	300	10 % Discount to BIS on total invoiced value
8(Mechanical and Physical Properties)	-	23420	10 % Discount to BIS on total invoiced value
8.2(Cupping test)	-	540	10 % Discount to BIS on total invoiced value
Cl. 8.3 Table 6(Hardness Test ( Only for CR0 & CR1))	-	300	10 % Discount to BIS on total invoiced value
8.4(Bend Test)	-	300	10 % Discount to BIS on total invoiced value
8.5(Plastic strain ratio)	-	9000	10 % Discount to BIS on total invoiced value
Cl. 8.6 Table 5A, 5B & 5C(Tensile Strain Hardening Component (n-Value))	-	9000	10 % Discount to BIS on total invoiced value
8.7(Black Hardening Index)	-	3500	10 % Discount to BIS on total invoiced value
7.0(MICRO ALLOYS)	-	300	10 % Discount to BIS on total invoiced value
7.0(NITROGEN)	-	300	10 % Discount to BIS on total invoiced value

Complete

31 Dec, 2026

-
-

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

As per Table 1 to 7

7080 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1 Table 2 Table 3(Carbon Content IS 228)	-	300	10 % Discount to BIS on total invoiced value
8.1 Table 2 Table 3(Manganese Content IS 228)	-	300	10 % Discount to BIS on total invoiced value
8.1 Table 2 Table 3(Phosphorus Content IS 228)	-	300	10 % Discount to BIS on total invoiced value
8.1 Table 2 Table 3(Sulphur Content IS 228)	-	300	10 % Discount to BIS on total invoiced value
9.3(Guided bend test(For SAW Pipes))	-	1200	10 % Discount to BIS on total invoiced value
9.1(Tensile test-Yield Strength)	-	780	10 % Discount to BIS on total invoiced value
9.1(Tensile test-Strength)	-	780	10 % Discount to BIS on total invoiced value
9.1(Tensile test- Elongation)	-	780	10 % Discount to BIS on total invoiced value
9.2.3(Flattening Test for seamless pipes)	-	300	10 % Discount to BIS on total invoiced value
9.3(Guided Bend Test (for SAW Pipes))	-	1200	10 % Discount to BIS on total invoiced value
11.1, Table 5.(Mass)	-	300	10 % Discount to BIS on total invoiced value
11.1, Table 5.(Outside Diameter (OD))	-	300	10 % Discount to BIS on total invoiced value
11.1, Table 5.(Thickness)	-	300	10 % Discount to BIS on total invoiced value
12.5(Strightness)	-	300	10 % Discount to BIS on total invoiced value
9.2.1(Flattening test for ERW pipes )	-	300	10 % Discount to BIS on total invoiced value
10(Hydaulic pressure test)	-	1500	10 % Discount to BIS on total invoiced value

Complete

31 Dec, 2026

-
-

IS 814 (2004)

Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision)

26220 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Diameter of Core Wire)	-	600	10 % Discount to BIS on total invoiced value
7.1.2(Length of Electrodes)	-	600	10 % Discount to BIS on total invoiced value
6 & 8.2(Carbon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	300	10 % Discount to BIS on total invoiced value
6 & 8.2(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	300	10 % Discount to BIS on total invoiced value
6 & 8.2(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	300	10 % Discount to BIS on total invoiced value
6 & 8.2(Manganese- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	300	10 % Discount to BIS on total invoiced value
6 & 8.2(Silicon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	300	10 % Discount to BIS on total invoiced value
6 & 8.2(Chromium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	300	10 % Discount to BIS on total invoiced value
6 & 8.2(Nickel- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	300	10 % Discount to BIS on total invoiced value
6 & 8.2(Molybdenum- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	300	10 % Discount to BIS on total invoiced value
6 & 8.2(Copper- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	300	10 % Discount to BIS on total invoiced value
6 & 8.2(Titanium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	300	10 % Discount to BIS on total invoiced value
6 & 8.2(Vanadium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	300	10 % Discount to BIS on total invoiced value
6 & 8.2(Alumiminium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	300	10 % Discount to BIS on total invoiced value
9.1.2 Table 6 (Ultimate Tensile Strength-Annex F)	-	840	10 % Discount to BIS on total invoiced value
9.1.2 Table 6 ( Yield Stress -Annex F)	-	840	10 % Discount to BIS on total invoiced value
9.1.2 Table 6 (Percentage Elongation on Gauge Length-Annex F)	-	840	10 % Discount to BIS on total invoiced value
9.1.3 Table 6 ( Impact Strength-Annex F)	-	1080	10 % Discount to BIS on total invoiced value
9.2(Butt Weld Bend Test-IS 1599)	-	1200	10 % Discount to BIS on total invoiced value
9.3(Running PerformanceTest-Annex H)	-	240	10 % Discount to BIS on total invoiced value
9.4(Increased Metal Recovery Test-IS 13043)	-	360	10 % Discount to BIS on total invoiced value
9.5(Diffusible Hydrogen Evaluation Test-IS 11802)	-	6000	10 % Discount to BIS on total invoiced value
9.6(Radiographic Test- IS 1182)	-	900	10 % Discount to BIS on total invoiced value
7.4(Defects of Core wire and Coverings)	-	300	10 % Discount to BIS on total invoiced value
7.2.1(Contact End)	-	300	10 % Discount to BIS on total invoiced value
7.2.2(Arc striking End)	-	300	10 % Discount to BIS on total invoiced value
7.3(Concentricity of Flux covering with core wire)	-	300	10 % Discount to BIS on total invoiced value

Complete

31 Dec, 2026

-
-

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

As per Table 1 to 7

5760 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	780	10 % Discount to BIS on total invoiced value
Cl 9(Press)	-	420	10 % Discount to BIS on total invoiced value
Cl 10(Die Press)	-	360	10 % Discount to BIS on total invoiced value
Cl 13(Length, Width & Thickness)	-	300	10 % Discount to BIS on total invoiced value
6.1(Carbon %)	-	300	10 % Discount to BIS on total invoiced value
6.1(Manganese %)	-	300	10 % Discount to BIS on total invoiced value
6.1(Phosphorus %)	-	300	10 % Discount to BIS on total invoiced value
6.1(Sulphur %)	-	300	10 % Discount to BIS on total invoiced value
6.1(Silicon %)	-	300	10 % Discount to BIS on total invoiced value
6.1( Copper %)	-	300	10 % Discount to BIS on total invoiced value
6.1( Aluminium %)	-	300	10 % Discount to BIS on total invoiced value
6.1( Nb)	-	300	10 % Discount to BIS on total invoiced value
6.1(V)	-	300	10 % Discount to BIS on total invoiced value
6.1( Ti)	-	300	10 % Discount to BIS on total invoiced value
6.1(Cr)	-	300	10 % Discount to BIS on total invoiced value
6.1(Mo)	-	300	10 % Discount to BIS on total invoiced value
6.1(Ni)	-	300	10 % Discount to BIS on total invoiced value
6.1( Nitrogen%)	-	300	10 % Discount to BIS on total invoiced value
6.1(Microalloying)	-	300	10 % Discount to BIS on total invoiced value
Clause 10(Cuppping Test)	-	360	10 % Discount to BIS on total invoiced value
Cl 12(Workmanship)	-	300	10 % Discount to BIS on total invoiced value

Complete

31 Dec, 2026

-
-

IS 21 (1992)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

As per Table 1 & 2

5400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Bend Test (Radius of Bend))	-	420	10 % Discount to BIS on total invoiced value
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	420	10 % Discount to BIS on total invoiced value
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	420	10 % Discount to BIS on total invoiced value
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	420	10 % Discount to BIS on total invoiced value
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	420	10 % Discount to BIS on total invoiced value
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Tensile Strength)	-	420	10 % Discount to BIS on total invoiced value
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(0.2 Percent Proof Stress)	-	420	10 % Discount to BIS on total invoiced value
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Bend Test (Radius of Bend))	-	420	10 % Discount to BIS on total invoiced value
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	780	10 % Discount to BIS on total invoiced value
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	780	10 % Discount to BIS on total invoiced value
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	780	10 % Discount to BIS on total invoiced value
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	780	10 % Discount to BIS on total invoiced value
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Tensile Strength)	-	780	10 % Discount to BIS on total invoiced value
4.2, Table 1of IS:21 (Designation 64430)(Aluminium)	-	420	10 % Discount to BIS on total invoiced value
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(0.2 Percent Proof Stress)	-	780	10 % Discount to BIS on total invoiced value

Complete

31 Dec, 2026

-
-

IS 2879 (1998)

Mild steel for metal arc welding electrodes - Specification (Third Revision)

As per Table 1

5700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8 & 9(Diameter)	-	300	10 % Discount to BIS on total invoiced value
6(Carbon %)	-	300	10 % Discount to BIS on total invoiced value
6(Manganese %)	-	300	10 % Discount to BIS on total invoiced value
6(Phosphorus %)	-	300	10 % Discount to BIS on total invoiced value
6(Sulphur %)	-	300	10 % Discount to BIS on total invoiced value
6(Silicon %)	-	300	10 % Discount to BIS on total invoiced value
6( Copper %)	-	300	10 % Discount to BIS on total invoiced value
6( Aluminium %)	-	300	10 % Discount to BIS on total invoiced value
6( Nb)	-	300	10 % Discount to BIS on total invoiced value
6(V)	-	300	10 % Discount to BIS on total invoiced value
6( Ti)	-	300	10 % Discount to BIS on total invoiced value
6(Cr)	-	300	10 % Discount to BIS on total invoiced value
6(Mo)	-	300	10 % Discount to BIS on total invoiced value
6(Ni)	-	300	10 % Discount to BIS on total invoiced value
6(Cr+ Mo+ Ni)	-	300	10 % Discount to BIS on total invoiced value
Cl 7(Workmanship)	-	300	10 % Discount to BIS on total invoiced value

Complete

31 Dec, 2026

-
-

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

As per Table 1 to 6

4440 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(carbon)	-	300	10 % Discount to BIS on total invoiced value
5.1(sulphur)	-	300	10 % Discount to BIS on total invoiced value
5.1(phosphorus)	-	300	10 % Discount to BIS on total invoiced value
5.1(manganese)	-	300	10 % Discount to BIS on total invoiced value
5.1(silicon )	-	300	10 % Discount to BIS on total invoiced value
5.1(aluminium)	-	300	10 % Discount to BIS on total invoiced value
5.1(Titanium)	-	300	10 % Discount to BIS on total invoiced value
5.1(copper)	-	300	10 % Discount to BIS on total invoiced value
5.1(nitrogen)	-	300	10 % Discount to BIS on total invoiced value
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	1440	10 % Discount to BIS on total invoiced value
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	1440	10 % Discount to BIS on total invoiced value
Cl 8.1(UTM)	-	780	10 % Discount to BIS on total invoiced value
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	780	10 % Discount to BIS on total invoiced value
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	780	10 % Discount to BIS on total invoiced value
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	780	10 % Discount to BIS on total invoiced value
Cl.12(Freedom from defects)	-	300	10 % Discount to BIS on total invoiced value
Cl 13(Weight)	-	300	10 % Discount to BIS on total invoiced value
Cl 14(Length, Width & Thickness)	-	300	10 % Discount to BIS on total invoiced value
Cl. 14 (Cl. 14 & Cl 15 (Length))	-	300	10 % Discount to BIS on total invoiced value
Cl. 14 (Cl. 14 & Cl 15 (Width))	-	300	10 % Discount to BIS on total invoiced value
Cl. 9(Surface roughness)	-	600	10 % Discount to BIS on total invoiced value
Cl. 14 & Cl. 15 (Cl. 14 & Cl. 15 (Thickness))	-	300	10 % Discount to BIS on total invoiced value
Cl 8.2(Press)	-	420	10 % Discount to BIS on total invoiced value

Complete

31 Dec, 2026

-
-

Bureau of Indian Standards

The National Standards Body of India

TCR ENGINEERING SERVICES PVT.LTD.

VKB HOUSE PLOT NO. EL-182 MIDC TTC ELECTRONIC ZONE MAHAPE NAVI MUMBAI, NAVI MUMBAI, Thane, Maharashtra, 400710

9833007181 sales@tcreng.com

Scope List