BIS - LIMS (Laboratory Information Management System)

TRUSTIN ANALYTICAL SOLUTIONS PRIVATE LIMITED, CHENNAI

R K COMPLEX, PLOT NO: 303/B, BLOCK-B, FIRST FLOOR, THIRUNEERMALAI ROAD, PARVATHYPURAM, CHROMPET, CHENNAI, Kanchipuram, Tamil Nadu, 600044

9444303174 mahendran@trustingroup.in

Scope List

Reset

5 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 13422 (2024)

Single-use Sterile Rubber Surgical Gloves ï¿½ Specification (First Revision)

Type 1 &2/Size : 5.5 to 9.0/Designation: Left or Right

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Materials)	-	250	-
Cl-6(Sampling and selection of test pieces)	-	250	-
Cl-7.1(Dimensions)	-	2000	Length, width and Thickness
Cl-7.2(Watertightness)	-	3500	Max. 500 Pcs tested
Cl-7.3(Tensile properties)	-	1000	-
Cl-7.3.1(General)	-	250	-
Cl-7.3.2(Force at break and elongation at break before accelerated ageing)	-	2000	Before ageing
Cl-7.3.3(Force at break and elongation at break after accelerated ageing)	-	3000	Accelerated ageing
Cl-7.3.4(Force required to produce 300 % elongation)	-	500	-
Cl-7.4(Sterility)	-	2000	-
Cl-9(Marking.)	-	250	-
Cl-5(Materials)	-	0	-
Cl-6(Sampling and selection of test pieces)	-	0	-
Cl-7.1(Dimensions)	-	0	-
Cl-7.2(Watertightness)	-	0	-
Cl-7.3(Tensile properties)	-	0	-
Cl-7.3.1(General)	-	0	-
Cl-7.3.2(Force at break and elongation at break before accelerated ageing)	-	0	-
Cl-7.3.3(Force at break and elongation at break after accelerated ageing)	-	0	-
Cl-7.3.4(Force required to produce 300 % elongation)	-	0	-
Cl-7.4(Sterility)	-	0	-
Cl-9(Marking.)	-	0	-

21 Jan, 2027

-
Included w.e.f. 13.11.2025

IS 15354 : Part 1 (2018)

Single - Use medical examination gloves: Part 1 specification for gloves made from rubber latex or rubber solution (First Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 & Table 2(Size code)	-	500	-
6.1 & Table 2(Minimum length (dimension l, Figure 1))	-	500	-
6.1 & Table 2(Width corresponding to Descriptive size (dimension w,Figure 1))	-	500	-
6.1 & Table 2(Minimum thickness (at locations shown in Figure 2))	-	500	-
6.1 & Table 2(Maximum thickness (at approximate centre of palm))	-	500	-
6.3.2 & Table 3(Minimum force at break before accelerated ageing)	-	1000	-
6.3.2 & Table 3(Minimum Elongation at break before accelerated ageing)	-	1000	-
6.3.3 & Table 3(Minimum force at break after accelerated ageing)	-	1000	-
6.3.3 & Table 3(Minimum Elongation at break after accelerated ageing)	-	1000	-
6.2(Watertightness)	-	1000	-

21 Jan, 2027

-
Included w.e.f 28.10.2025

IS 4148 (1989)

Surgical rubber gloves - Specification (First Revision)

5888 View breakup
Rs.5888/- per size

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Dimensions Fig 1 and Table 1)	-	100	-
4.2(Dimensions Fig 1 and Table 1)	-	100	-
4.2(Dimensions Fig 1 and Table 1)	-	100	-
4.2(Dimensions Fig 1 and Table 1)	-	100	-
4.2(Dimensions Fig 1 and Table 1)	-	100	-
4.2(Dimensions Fig 1 and Table 1)	-	100	-
4.2(Dimensions Fig 1 and Table 1)	-	100	-
4.3(Thickness)	-	250	-
4.4.1(Physical Properties)	-	250	-
4.4.1(Physical Properties)	-	250	-
4.4.2(After accelerated aging at 70 + 1OC for 240 h )	-	750	-
4.4.2(After accelerated aging at 70 + 1OC for 240 h )	-	500	-
4.4.3(After heat ageing in autoclave)	-	500	-
4.4.4(Tension Set)	-	500	-
4.5(pH of Aqueous Extract )	-	500	-
4.1.3(Manufacture)	-	100	-
4.1.2(Manufacture)	-	100	-

21 Jan, 2027

-
-

IS 13422 (1992)

Disposable surgical rubber gloves specification

7650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.2 and Table 1 Fig. 1(Dimensions - Length)	-	150	-
5.2.2 and Table 1 Fig. 1(Dimensions - Width)	-	250	-
5.2.2 and Table 1 Fig. 1(Dimensions - Thickness of Finger)	-	250	-
5.2.2 and Table 1 Fig. 1(Dimensions - Thickness of Palm)	-	250	-
5.2.2 and Table 1 Fig. 1(Dimensions - Thickness of Cuff)	-	250	-
5.3 and Table 2( Tensile Strength Before Ageing)	-	500	-
5.3 and Table 2( Elongation at Break Before Ageing)	-	500	-
5.3 and Table 2(Stress at 500% Elongation at Break Before Ageing)	-	500	-
5.3 and Table 2( Tensile StrengthAfter Accelerated Ageing)	-	1000	-
5.3 and Table 2( Elongation at Break After Accelerated Ageing)	-	1000	-
5.5(Airtight Test)	-	1000	-
5.4(Sterility)	-	2000	-

21 Jan, 2027

-
-

IS 5405 (2019)

Sanitary napkins – Specification (second revision)

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(SIZES, Regular )	-	250	-
Cl 5(SIZES, Large)	-	250	-
Cl 5(SIZES, Extra Large)	-	250	-
Cl 5(SIZES, XXL)	-	250	-
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	500	-
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	500	-
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	1500	-
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	1000	-

21 Jan, 2027

-
Exclusion: Cl 7.4 (Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization, IS/ISO 10993 Part 5 and IS/ISO 10993 Part 10), Cl 7.5 (Biodegradability and Compostability (Optional), IS/ISO 17088.)

Bureau of Indian Standards

The National Standards Body of India

TRUSTIN ANALYTICAL SOLUTIONS PRIVATE LIMITED, CHENNAI

R K COMPLEX, PLOT NO: 303/B, BLOCK-B, FIRST FLOOR, THIRUNEERMALAI ROAD, PARVATHYPURAM, CHROMPET, CHENNAI, Kanchipuram, Tamil Nadu, 600044

9444303174 mahendran@trustingroup.in

Scope List