BIS - LIMS (Laboratory Information Management System)

IPIRTI CENTRE

B-65, PHASE 7 INDUSTRIAL AREA, MOHALI, MOHALI, S.A.S Nagar, Punjab, 160055

7307490743 ipirticentre@yahoo.in

Scope List

Reset

8 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 3087 (2005)

Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

16160 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	800	GST EXTRA
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1))	-	800	GST EXTRA
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	800	GST EXTRA
1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS)	-	800	GST EXTRA
1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS)	-	800	GST EXTRA
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	2200	GST EXTRA
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1))	-	2200	GST EXTRA
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	2200	GST EXTRA
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS)	-	2200	GST EXTRA
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS)	-	2200	GST EXTRA
1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer))	-	2200	GST EXTRA
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1))	-	2200	GST EXTRA
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS)	-	2200	GST EXTRA
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS)	-	2200	GST EXTRA
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	2200	GST EXTRA
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2))	-	2200	GST EXTRA
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1))	-	2200	GST EXTRA
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS)	-	2200	GST EXTRA
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS)	-	2200	GST EXTRA
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer))	-	2200	GST EXTRA
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1))	-	2200	GST EXTRA
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2))	-	2200	GST EXTRA
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS)	-	2200	GST EXTRA
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	2200	GST EXTRA
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1))	-	2200	GST EXTRA
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS)	-	2200	GST EXTRA
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS)	-	2200	GST EXTRA
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	2200	GST EXTRA
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1))	-	2200	GST EXTRA
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	2200	GST EXTRA
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS)	-	2200	GST EXTRA
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS)	-	2200	GST EXTRA
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	2200	GST EXTRA
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1))	-	2200	GST EXTRA
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	2200	GST EXTRA
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS)	-	2200	GST EXTRA
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS)	-	2200	GST EXTRA
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer))	-	2200	GST EXTRA
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1))	-	2200	GST EXTRA
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	2200	GST EXTRA
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT)	-	2200	GST EXTRA
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	2200	GST EXTRA
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1))	-	2200	GST EXTRA
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	2200	GST EXTRA
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS)	-	2200	GST EXTRA
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT)	-	2200	GST EXTRA
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-	2200	GST EXTRA
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1))	-	2200	GST EXTRA
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	2200	GST EXTRA
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS)	-	2200	GST EXTRA
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT)	-	2200	GST EXTRA
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	2200	GST EXTRA
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-	2200	GST EXTRA
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	2200	GST EXTRA
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS)	-	2200	GST EXTRA
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT)	-	2200	GST EXTRA
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-	2200	GST EXTRA
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-	2200	GST EXTRA
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	2200	GST EXTRA
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS)	-	2200	GST EXTRA
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT)	-	2200	GST EXTRA

Complete

IS 15380 (2003)

Moulded Raised High Density Fibre (HDF) Panel Doors -

18400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5, Table-1(dimension )	-	800	GST EXTRA
7.1(Heavy duty (Construction))	-	800	GST EXTRA
7.2(Light duty)	-	800	GST EXTRA
7.3(Empanelment)	-	800	GST EXTRA
7.4(Lipping )	-	800	GST EXTRA
7.5(rebating )	-	800	GST EXTRA
9(workmanship and finish)	-	800	GST EXTRA
11.1(Dimension and squareness test)	-	800	GST EXTRA
11.2(General flatness test)	-	800	GST EXTRA
11.3(low Planeness Teat)	-	800	GST EXTRA
11.4(Impact Indentation Test)	-	2080	GST EXTRA
11.5(Flexure Test)	-	2080	GST EXTRA
11.6(edge loading test)	-	2080	GST EXTRA
11.7(shock resistance test)	-	3360	GST EXTRA
11.8(Buckling Test)	-	2080	GST EXTRA
11.9(slamming Test)	-	1280	GST EXTRA
11.1(misuse test)	-	2080	GST EXTRA
11.11(varying humidity test)	-	5840	GST EXTRA
11.12(end immersion test)	-	1280	GST EXTRA
11.13(glue adhesion test)	-	960	GST EXTRA
11.14(screw withdrawal resistance test)	-	1680	GST EXTRA
Clause 6.2(Moisture content)	-	800	GST EXTRA

Complete

IS 5509 (2000)

Fire retardant plywood - Specification (Second Revision)

13600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(a) Length)	-	800	GST EXTRA
8(b) Width)	-	800	GST EXTRA
8(c) Thickness 1) less than 6mm ±10% 2) 6 mm and above ±5% )	-	800	GST EXTRA
8.3 & Annex A (d) Edge Straightness 0.2% Max.)	-	800	GST EXTRA
8.3 & Annex A (e) Edge Squareness 0.2% Max.)	-	800	GST EXTRA
9(Workmanship and finish)	-	800	GST EXTRA
12(Test Requirements )	-	800	GST EXTRA
12.2(Moisture content )	-	800	GST EXTRA
12.3.1(Flammability )	-	2100	GST EXTRA
12.3.2(Flame Penetration )	-	2100	GST EXTRA
12.2.3(Rate of burning )	-	2000	GST EXTRA
12.4(Glue adhesion (water resistance ))	-	2200	GST EXTRA
12.4(Static Bending Strength as per BWR grade of IS 303 :)	-	2200	GST EXTRA
12.4(Modulus of Rupture, (Along the grain direction of the face veneer))	-	2200	GST EXTRA
12.4(Modulus of Rupture, (Across the grain direction of the face veneer))	-	2200	GST EXTRA
12.4(Modulus of Rupture, (Across the grain direction of the face veneer))	-	2200	GST EXTRA
12.4(Modulus of Elasticity, (Along the grain direction of the face veneer))	-	2200	GST EXTRA
12.4(Modulus of Elasticity, (Along the grain direction of the face veneer))	-	2200	GST EXTRA
12.4(Modulus of Elasticity, (Across the grain direction of the face veneer))	-	2200	GST EXTRA
12.4(Modulus of Elasticity, (Across the grain direction of the face veneer))	-	2200	GST EXTRA

Complete

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

8800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	2200	GST EXTRA
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	2200	GST EXTRA
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	2200	GST EXTRA
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	2200	GST EXTRA
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	2200	GST EXTRA
9.2.3(Adhesion of Plies - Annexure H)	-	800	GST EXTRA
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	2200	GST EXTRA
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	2200	GST EXTRA
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	800	GST EXTRA
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	800	GST EXTRA
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	800	GST EXTRA
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	800	GST EXTRA
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	800	GST EXTRA
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	800	GST EXTRA
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	800	GST EXTRA
7.3(Dimensional Requirements - Squareness - Annexure D)	-	800	GST EXTRA
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	800	GST EXTRA
7.3(Dimensional Requirements - Thickness - Annexure E)	-	800	GST EXTRA
7.3(Dimensional Requirements - Width - 8.1.4)	-	800	GST EXTRA
7.3(Dimensional Requirements - Length - 8.1.4)	-	800	GST EXTRA
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	800	GST EXTRA
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	800	GST EXTRA

Complete

IS 2202 : Part 1 (1999)

Wooden flush door shutters (Solid Core Type) - Specification: Part 1 plywood face panels (Sixth Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.15(Screw Withdrawal Strength - IS 4020 (Pt-16))	-	1680	GST EXTRA
11.15(Screw Withdrawal Resistance test - IS 4020 (Pt-16))	-	1680	GST EXTRA
11.14(Glue Adhesion Test - IS 4020(Pt-15))	-	960	GST EXTRA
11.13(Knife Test - IS 4020(Pt-14))	-	800	GST EXTRA
11.12(End Immersion Test - IS 4020(Pt-13))	-	1280	GST EXTRA
11.11(The recovery of the original size after subjecting the door to high and low humidity- IS 4020(Pt-12))	-	5840	GST EXTRA
11.11(Maximum departure from the general planeness - IS 4020(Pt-12))	-	5840	GST EXTRA
11.11(Varying Humidity Test - IS 4020(Pt-12))	-	5840	GST EXTRA
11.1(Misuse Test - IS 4020(Pt-11))	-	2080	GST EXTRA
11.9(Slamming Test - IS 4020(Pt-10))	-	1280	GST EXTRA
11.8(Residual deformation after 15 minutes of unloading - IS 4020(Pt-9))	-	2080	GST EXTRA
11.8(Initial deflection - IS 4020(Pt-9))	-	2080	GST EXTRA
11.8(Buckling Test - IS 4020(Pt-9))	-	2080	GST EXTRA
11.7(Shock Resistance Test -IS 4020(Pt-8))	-	3360	GST EXTRA
11.7(Shock Resistance Test -IS 4020(Pt-8))	-	3360	GST EXTRA
11.6(Residual lateral buckling - IS 4020(Pt-7))	-	2080	GST EXTRA
11.6(Lateral buckling during loading - IS 4020(Pt-7))	-	2080	GST EXTRA
11.6(Residual deflection after removal of load - IS 4020(Pt-7))	-	2080	GST EXTRA
11.6(Deflection of the edge at maximum load - IS 4020(Pt-7))	-	2080	GST EXTRA
11.5(Residual deflection - IS 4020(Pt-6))	-	2080	GST EXTRA
11.5(Deflection at maximum load - IS 4020(Pt-6))	-	2080	GST EXTRA
11.4(Depth of indentation - IS 4020(Pt-5))	-	2080	GST EXTRA
11.4(Impact Indentation Test - IS 4020(Pt-5))	-	2080	GST EXTRA
11.3(Depth of deviation - IS 4020(Pt-4))	-	800	GST EXTRA
11.2( Twist, cupping & wrapping - IS 4020 (Pt-3))	-	800	GST EXTRA
11.1( Squareness Test - IS 4020 (Pt-2))	-	800	GST EXTRA
11.1(Variation in thickness - IS 4020 (Pt-2))	-	800	GST EXTRA
11.1(Thickness - IS 4020 (Pt-2))	-	800	GST EXTRA
11.1(Width- IS 4020 (Pt-2))	-	800	GST EXTRA
11.1(Height - IS 4020 (Pt-2))	-	800	GST EXTRA
9.3(Workmanship & finish - IS 2202(Pt-1))	-	800	GST EXTRA
9.2(Workmanship & finish - IS 2202(Pt-1))	-	800	GST EXTRA
6.2(Plywood)	-	800	GST EXTRA

Complete

IS 710 (2010)

Marine plywood - Specification (Second Revision)

20800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.1(MARKING)	-	800	GST EXTRA
11.2(MARKING)	-	800	GST EXTRA
7.1(WORKMANSHIP AND FINISH )	-	800	GST EXTRA
7.2(WORKMANSHIP AND FINISH )	-	800	GST EXTRA
7.3(WORKMANSHIP AND FINISH )	-	800	GST EXTRA
7.5(WORKMANSHIP AND FINISH )	-	800	GST EXTRA
6.1(DIMENSIONS)	-	800	GST EXTRA
6.1(DIMENSIONS)	-	800	GST EXTRA
6.2(DIMENSIONS)	-	800	GST EXTRA
6.3(DIMENSIONS)	-	800	GST EXTRA
6.3(DIMENSIONS)	-	800	GST EXTRA
9.1.1(MOISTURE CONTENT)	-	800	GST EXTRA
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	1680	GST EXTRA
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	1680	GST EXTRA
9.1.3 , 9.1.3.1.1(Water resistance test)	-	2200	GST EXTRA
9.1.3 , 9.1.3.1.2(Water resistance test)	-	2200	GST EXTRA
9.1.5(Mycological test)	-	2200	GST EXTRA
9.1.5 , 9.1.3.1.1(Mycological test)	-	2200	GST EXTRA
9.1.5 , 9.1.3.1.2(Mycological test)	-	2200	GST EXTRA
9.1.4(Tensile strength)	-	2200	GST EXTRA
9.1.6 (Table 3)(Static bending strength)	-	2200	GST EXTRA
9.1.6 (Table 3)(Static bending strength)	-	2200	GST EXTRA
9.1.7 (Table 4)(Wet bending strength)	-	2200	GST EXTRA

Complete

IS 1328 (1996)

Veneered Decorative Plywood -Specification

ALL

4400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Grade - For BWR)	-	800	GST EXTRA
4.1(Grade - For MR)	-	800	GST EXTRA
4.2(Type - For Type 1)	-	800	GST EXTRA
4.2(Type - For Type 2)	-	800	GST EXTRA
7.1.1(Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1)	-	800	GST EXTRA
7.2.1(Requirements - Open splits, checks or open joints - For Type 2 - Cl. 7.2.1)	-	800	GST EXTRA
7.1.2(Requirements - Other defects - For Type 1 - Cl. 7.1.2)	-	800	GST EXTRA
7.2.2(Requirements - Other defects - For Type 2 - Cl. 7.2.2.)	-	800	GST EXTRA
7.1.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 1 - Cl. 7.1.3)	-	800	GST EXTRA
7.2.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3)	-	800	GST EXTRA
8(Dimensions & Tolerances - Length - Cl. 8)	-	800	GST EXTRA
8(Dimensions & Tolerances - Width - Cl. 8)	-	800	GST EXTRA
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	800	GST EXTRA
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	800	GST EXTRA
8(Dimensions & Tolerances - Squareness - Annexure C)	-	800	GST EXTRA
9(Finish - Cl. 9.1, 8.3)	-	800	GST EXTRA
9(Finish - Cl. 9.2, 8.3)	-	800	GST EXTRA
11(Tests - Moisture Content - Part 1 of IS 1734)	-	800	GST EXTRA
11(Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-	2200	GST EXTRA
11(Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-	2200	GST EXTRA

Complete

IS 303 (1989)

Plywood for General Purposes -

MR/BWR

6400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	2200	GST EXTRA
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	2200	GST EXTRA
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	2200	GST EXTRA
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	2200	GST EXTRA
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	2200	GST EXTRA
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	2200	GST EXTRA
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	2200	GST EXTRA
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	2200	GST EXTRA
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	2200	GST EXTRA
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	2200	GST EXTRA
11.3(Moisture Content - Part 1 of IS 1734)	-	800	GST EXTRA
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	800	GST EXTRA
8(Dimensions & Tolerances - Squareness - Annexure C)	-	800	GST EXTRA
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	800	GST EXTRA
8(Dimensions & Tolerances - Width - Cl. 8)	-	800	GST EXTRA
8(Dimensions & Tolerances - Length - Cl. 8)	-	800	GST EXTRA
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	800	GST EXTRA
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	800	GST EXTRA
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	800	GST EXTRA
5.1(Type - For BB Type)	-	800	GST EXTRA
5.1(Type - For AB Type)	-	800	GST EXTRA
5.1(Type - For AA Type)	-	800	GST EXTRA
4(Grade - For MR grade)	-	800	GST EXTRA
4(Grade - For BWR grade)	-	800	GST EXTRA

Complete

Bureau of Indian Standards

The National Standards Body of India

IPIRTI CENTRE

B-65, PHASE 7 INDUSTRIAL AREA, MOHALI, MOHALI, S.A.S Nagar, Punjab, 160055

7307490743 ipirticentre@yahoo.in

Scope List