BIS - LIMS (Laboratory Information Management System)

CENTRAL INSTITUTE OF ROAD TRANSPORT

Pune Nasik Road, Bhosari, Pune, Pune, Pune, Maharashtra, 411026

9823113934 qm@cirtindia.com

Scope List

Reset

13 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 15627 (2005)

Automotive vehicles - Pneumatic tyres i?or two and three - Wheeled motor vehicles - Specification

Pneumatic tyres _Two and Three Wheeled Motor Vehicles

73800.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.1.1.1- Refer Annex C Col 2 and Annex D(test method )(Tyre dimensions/Section width)	-	2330.00	NA
4/4.1.1.2- Refer Annex C Col 2 and Annex D(test method )(Tyre outer diameter)	-	0.00	NA
4.6.2 Refer Annex D(Method of measurement)(Tread Wear Indicators)	-	0.00	NA
4/4.2.1 /4.2.2/4.2.3,Annex E ,Table 12(Load/Speed Performance Test)	-	6360.00	NA
4/4.2.4(Outer diameter of the .tyre after the 6 hrs of the Load/Speed Performance Test shall not differ from the outer diameter measured before the test by more than + 3.5 percent.)	-	0.00	NA
4/4.2.5 Refer Annex C (The tyre overall width measured at the end of the load/speed performance test shall not exceed the value specified in 4.1.l.l(d) or 4.1.l.l(f) as applicable.)	-	0.00	NA
4.4,Refer Table 14 to 16 and Annex G(Tyre Strength Test (Plunger Test) )	-	12700.00	NA
4.5 refer Table 17 and Annex H(Endurance Test)	-	52360.00	NA
5, Annex J(Arrangement of tyre markings)	-	0.00	NA

15 Sep, 2025

-
(Only upto tyres of the speed category P (150 kmph))

IS 15633 (2005)

Automotive vehicles - Pneumatic tyres for passenger car vehicles - Diagonal and radial ply - Specification

76200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.1.1.1- Refer Annex B Col 2 and Annex D(test method )(Tyre dimensions/Section width)	-	2290	1) Complete Test charges Rs. 87900/- for speed above Y 2) Complete Test charges Rs. 76200/- for Tyre having speed 'L' to 'Y' 3) Test charges Rs. 2290/- includes Tyre marking, Dimensions, TWI and Report preparation
4/4.1.1.2- Refer Annex B Col 2 and Annex D(test method )(Tyre outer diameter)	-	2290	1) Complete Test charges Rs. 87900/- for speed above Y 2) Complete Test charges Rs. 76200/- for Tyre having speed 'L' to 'Y' 3) Test charges Rs. 2290/- includes Tyre marking, Dimensions, TWI and Report preparation
4/4.2.1 /4.2.2/4.2.3,Refer Annex D ,Table 13(Load/Speed Performance Test)	-	6220	1) Complete Test charges Rs. 87900/- for speed above Y 2) Complete Test charges Rs. 76200/- for Tyre having speed 'L' to 'Y' 3) Test charges Rs. 6220/- for Load/Speed Performance Test
4.2.4(Outer diameter of the .tyre after the 6 hrs of the Load/Speed Performance Test shall not differ from the outer diameter measured before the test by more than + 3.5 percent.)	-	6220	1) Complete Test charges Rs. 87900/- for speed above Y 2) Complete Test charges Rs. 76200/- for Tyre having speed 'L' to 'Y' 3) Test charges Rs. 6220/- for Outer Diameter after Load/Speed Performance Test
4.3/4.3.1/4.3.2 Refer Annex E and Table 14( Endurance Test)	-	51300	1) Complete Test charges Rs. 87900/- for speed above Y 2) Complete Test charges Rs. 76200/- for Tyre having speed 'L' to 'Y' 3) Test charges Rs. 51300/- for Endurance Test
4.4/4.4.1/4.4.2 Refer Annex F and Table 15 and 16(Bead Unseating Resistance Test for Tubeless Tyre )	-	3950	1) Complete Test charges Rs. 87900/- for speed above Y 2) Complete Test charges Rs. 76200/- for Tyre having speed 'L' to 'Y' 3) Test charges Rs. 3950/- for Bead Unseating Resistance Test
4.5/4.5.1(Tread-Wear -Indicators)	-	2290	1) Complete Test charges Rs. 87900/- for speed above Y 2) Complete Test charges Rs. 76200/- for Tyre having speed 'L' to 'Y' 3) Test charges Rs. 2290/- includes Tyre marking, Dimensions, TWI and Report preparation
4.6. Refer Annex G ,Table 17 and 18(Tyre.Strength Test)	-	12440	1) Complete Test charges Rs. 87900/- for speed above Y 2) Complete Test charges Rs. 76200/- for Tyre having speed 'L' to 'Y' 3) Test charges Rs. 12440/- for Tyre Strength Test
5.4, Annex J(Arrangement of tyre markings)	-	2290	1) Complete Test charges Rs. 87900/- for speed above Y 2) Complete Test charges Rs. 76200/- for Tyre having speed 'L' to 'Y' 3) Test charges Rs. 2290/- includes Tyre marking, Dimensions, TWI and Report preparation

15 Sep, 2025

-
-

IS 15633 (2022)

Automotive vehicles - pneumatic tyres for passenger car vehicles - diagonal and radial ply

Tyre Sizes as IS 15633 : 2022

89800 View breakup
Rs. 76,200 for Tubeless Tyre All Load Index, Speed Category L(120 kmph) to Y(300 kmph) Rs. 87,900 for Tubeless Tyre Speed Category above (Y) (above 300 kmph) Rs. 73,800 for Tube Tyre All Load Index, Speed Category L(120 kmph) to Y(300 kmph) Rs. 87,900 for Tube Tyre Speed Category above Y (300 kmph)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	2430	1) Compete Test charges Rs.76200/- for tubeless, speed L to Y & Rs. 87900/- for above speed Y. For tube type Rs.7380/- for L to Y & Rs.89800/- above Y 2) Marking, Dimension & TWI -Rs .2430/-
4.1(Tyre dimension- Section Width)	-	2430	1) Compete Test charges Rs.76200/- for tubeless, speed L to Y & Rs. 87900/- for above speed Y. For tube type Rs.7380/- for L to Y & Rs.89800/- above Y 2) Marking, Dimension & TWI -Rs .2430/-
4.1(Tyre dimension- Outer diameter)	-	2430	1) Compete Test charges Rs.76200/- for tubeless, speed L to Y & Rs. 87900/- for above speed Y. For tube type Rs.7380/- for L to Y & Rs.89800/- above Y 2) Marking, Dimension & TWI -Rs .2430/-
4.5(Tread wear Indicator)	-	2430	1) Compete Test charges Rs.76200/- for tubeless, speed L to Y & Rs. 87900/- for above speed Y. For tube type Rs.7380/- for L to Y & Rs.89800/- above Y 2) Marking, Dimension & TWI -Rs .2430/-
4.3(Endurance test)	-	54700	1) Endurance Test charges Rs.51300/- for tubeless, speed L to Y & Rs. 51160/- for above speed Y. For tube type Rs.52360/- for L to Y & Rs.54700/- above Y
4.2(Load & Speed test)	-	19380	1) Load /Speed Test charges Rs.6220/- for tubeless, speed L to Y & Rs. 19380/- for above speed Y. For tube type Rs.6360/- for L to Y & Rs.19380/- above Y
4.6(Tyre strength (Plunger test))	-	13260	1) Tyre Strength Test charges Rs.12440/- for tubeless, speed L to Y & Rs. 12400/- for above speed Y. For tube type Rs.12700/- for L to Y & Rs.13260/- above Y
4.4(Bead Unseating Resistance)	-	3950	1) Bead Unseating Test charges Rs.3950/- for tubeless, speed L to Y & Rs. 3930/- for above speed Y.

15 Sep, 2025

-
Revised Version of IS 15633:2022. Included w.e.f. 22.05.2023.

IS 15627 (2022)

Automotive Vehicles - Pneumatic Tyres for Two and Three - Wheeled Motor Vehicles - Specification First Revision

Tyre Size designation as per IS 15627: 2022

73800 View breakup
Rs. 70,000 for Tyre All Load Index, Speed Category less than or equal to P (150 kmph)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	2330	Test Charges Rs. 2330/- for Marking,Dimensions & TWI
4.1(Tyre dimension- Section Width)	-	2330	Test Charges Rs. 2330/- for Marking,Dimensions & TWI
4.1(Tyre dimension- Outer diameter)	-	2330	Test Charges Rs. 2330/- for Marking,Dimensions & TWI
4.6(Tread wear Indicator)	-	2330	Test Charges Rs. 2330/- for Marking,Dimensions & TWI
4.5(Endurance test)	-	52360	-
4.2(Load & Speed test)	-	6360	-
4.4(Tyre strength (Plunger test))	-	12700	-

15 Sep, 2025

-
Revised Version of IS 15627:2022. Included w.e.f. 22.05.2023. (Only upto tyres of the speed category P (150 kmph))

IS 15636 (2022)

Automotive vehicles - Pneumatic tyres for commercial vehicles - Diagonal and radial ply

All tyre sizes mentioned in IS 15636

88000 View breakup
Rs. 88,000 for Tyre having a) Load Index ≥ 122, Speed Category F(80 kmph) to M (130 kmph) b) Load Index ≤ 121, Speed Category F(80 kmph) to K(110 kmph) Rs. 70,000 for Tyre having Load Index ≤ 121, Speed M(130 kmph) to P(150kmph) Rs. 22,000 for Tyre having All Load Index, Speed Category Q (160 kmph) & above Rs. 88000 for Tyre having a) Load Index ≥ 122, Speed Category F(80 kmph) to M (130 kmph) and having Load / Speed combination in addition to nominal Load / Speed of tyre. b) Load Index ≤ 121, Speed Category F(80 kmph) to K(110 kmph) and having Load / Speed combination in addition to nominal Load / Speed of tyre. Rs. 88000 For Tyre having a) Load Index ≤ 121, Speed M(130 kmph) to P(150kmph) and having Load / Speed combination in addition to nominal Load / Speed of tyre.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 5.2, Annex E,(Arrangement of Tyre Markings)	-	2420	Test charges Rs. 2420/- includes Tyre marking, Dimensions, TWI and Report preparation.
Cl. No. 4.1.1.1, Annex A, Table No. 6 to 28(Tyre Dimension_Section Width of Tyre)	-	2420	Test charges Rs. 2420/- includes Tyre marking, Dimensions, TWI and Report preparation.
Cl. No. 4.1.1.2, Annex A, Table No. 6 to 28(Tyre Dimension_Outer Diameter of Tyre)	-	2420	Test charges Rs. 2420/- includes Tyre marking, Dimensions, TWI and Report preparation.
Cl. No. 4.4, Annex-A(Tread Wear Indicators)	-	2420	Test charges Rs. 2420/- includes Tyre marking, Dimensions, TWI and Report preparation.
Cl. No. 4.2, Annex B, Table No. 29(Endurance Test)	-	72400	1) Test charges Rs. 72400/- for Endurance Test (47 hrs). 2) Test charges Rs. 54340/- for Endurance Test (34 hrs).
4.3(Load & Speed test)	-	6530	1) Complete Test charges Rs. 22000/- for speed category Q & above. 2) Test charges Rs.6530/- for Load/Speed performance Test.
4.5(Tyre strength (Plunger test))	-	13170	1) Test charges Rs. 13170/- for load index ≥ 122 & load index ≤ 121 & speed F. 2) Test charges Rs. 13180/- for oad index ≥ 122 speed N or P with marking C or LT & complete test charges = 70000/- 3) Rs. 13050/- for plunger test speed Q & above

15 Sep, 2025

-
Revised Version of IS 15636:2022.Included w.e.f. 22.05.2023.

IS 15636 (2012)

Automotive vehicles - Pneumatic tyres for commercial vehicles - Diagonal and radial ply - Specification (First Revision)

88000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Section width of tyre)	-	2420	1) Complete Test charges Rs. 88000/- 2) Test charges Rs. 2420/- includes Tyre marking, Dimensions, TWI and Report preparation (Above Test Charges includes 15 % discount for BIS Samples)
4.1.1.2(Tyre outer diameter)	-	2420	1) Complete Test charges Rs. 88000/- 2) Test charges Rs. 2420/- includes Tyre marking, Dimensions, TWI and Report preparation (Above Test Charges includes 15 % discount for BIS Samples)
4.2(Endurance test)	-	72400	1) Complete Test charges Rs. 88000/- 2) Test charges Rs. 72400/- for Endurance test (47 hrs) (Above Test Charges includes 15 % discount for BIS Samples)
4.3.1(Load/Speed performance test)	-	6530	1) Complete Test charges Rs. 22000/- for speed Category Q & above 2) Test charges Rs. 6530/- for Load/Speed performance test (Above Test Charges includes 15 % discount for BIS Samples)
4,4,1(Tread -wear indicators)	-	2420	1) Complete Test charges Rs. 88000/- 2) Test charges Rs. 2420/- includes Tyre marking, Dimensions, TWI and Report preparation (Above Test Charges includes 15 % discount for BIS Samples)
4.5(Tyre strength test (Plunger rest))	-	13170	1) Complete Test charges Rs. 88000/- 2) Test charges Rs. 13170/- for Tyre strength test (Plunger rest) (Above Test Charges includes 15 % discount for BIS Samples)
5.2, Annex E(Arrangement of tyre markings)	-	2420	1) Complete Test charges Rs. 88000/- 2) Test charges Rs. 2420/- includes Tyre marking, Dimensions, TWI and Report preparation (Above Test Charges includes 15 % discount for BIS Samples)

15 Sep, 2025

-
-

IS 13098 (2012)

Automotive vehicles - Tubes for pneumatic tyres - Specification (First Revision)

17300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3/3.1 (for valve refer IS 9081)(MATERIALS, FORM AND FIT)	-	4600	(Cl.No.3.2 & 3.2.1, & 3.3) - Material (Rs.1500/-) , % Rubber HC Content by volume (Rs.1700/-) , Density (Rs.900/-) , Workmanship and Form & Fit Test (Rs.500/-) - Total (Rs.4600/-)
3/3.3(Uniformity(The Thickness shall not vary from the arithmetic mean of the readings by ± 17.5 % at any point in longitudinal direction :-Crown centre,Base centre,Side wall - 1,Side wall - 2))	-	1600	-
4/4.1.1(Elongation at break (Class A' Tubes))	-	1800	-
4/4.1.1(Elongation at break (Class B' Tubes))	-	1800	-
4/4.1.2( Strength of Splice (Class A' Tubes))	-	1900	-
4/4.1.2( Strength of Splice (Class B' Tubes))	-	1900	-
4/4.1.3 Refer annex B(Set After Ageing(Class A' Tubes))	-	2100	-
4/4.1.3 Refer annex B(Set After Ageing(Class B' Tubes))	-	2100	-
5(AIR TIGHTNESS)	-	500	-
4/4.1.4 Refer annex C(Accelerated Ageing(Both Class A and Class B))	-	4300	Other Testing Charges for Cl.No. 6.0 Marking - Rs.500/- Total Test Charges are Rs.17,300/- (10% Discount in case of Test Charges are Borne by BIS) for IS:13098:2012

15 Sep, 2025

-
-

IS 13154 (2015)

Automotive vehicles - Tyres for agricultural vehicles and their trailers - Specification (First Revision)

136660 View breakup
For tyres having speed category below 65kmph : Rs. 50,860/- (Except Cl.4.3); For tyres having Endurance test for 65kmph (Load/speed Test) : Rs. 1,36,660/- (10% discount to BIS samples)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1.1(Section Width of Tyre)	-	2860	1) Complete Test charges are Rs. 1,36,660/- 2) Test charges Rs. 2860/- includes Tyre marking ( Height of Marking), Dimensions, and Report preparation
4.1.1.2(Tyre Outer Diameter)	-	2860	1) Complete Test charges are Rs. 1,36,660/- 2) Test charges Rs. 2860/- includes Tyre marking ( Height of Marking), Dimensions, and Report preparation
4.2(Burst Test)	-	48000	1) Complete Test charges are Rs. 1,36,660/- 2) Test charges Rs. 48000/- for Burst Test
4.3(Endurance Test (Load /Speed Test))	-	85800	1) Complete Test charges are Rs. 1,36,660/- 2) Test charges Rs. 85,800/- for Tyre having Speed 65 kmph

15 Sep, 2025

-
-

IS 9081 (2017)

Automotive vehicles - Valves and valve accessories for pneumatic tyres - Specification (Fifth Revision)

14700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.1/4.2/4.3 & 5/5.1/5.2(Dimensions and Design Features & Valve Designation)	-	1400	Testing charges for Dimensions & Valve Core Interchangeability (Cl.No.4.1, 4.2, 4.3, 5.1, 5.2 & 7.3) = Rs.1400
6.1(Materials)	-	3000	(Metal Stem & Rubber Base) (Rs.1500+1500 = 3000)
6.2(Bendability of Valve Stem)	-	500	-
6.3(Hardness, Shore A)	-	900	-
6.4(Pull Out Strength Of Rubber Base)	-	1200	-
6.5(Adhesion Test)	-	600	-
6.6(Buffing)	-	500	Testing charges for Buffing & Workmanship (Cl.No. 6.6, 6.7, & 7.6) are Rs.500
6.7(Wormanship)	-	0	Already mentioned in Cl.No. 6.6 (Buffing)
6.8(Marking)	-	500	Testing charges for Marking (Cl.No. 6.8 & 7.5) are Rs.500
7.1(Materials)	-	3000	(Valve Core, Spring & Rubber Sealing Washers) (Rs.1500+1500 = 3000)
7.2(Valve Core Leakage)	-	1000	-
7.3(Valve Core Interchangeability)	-	0	Already mentioned in Cl.No. 4 (Dimensions)
7.4(Acceptable Operating Temperature)	-	2100	-
7.5(Marking)	-	0	Already mentioned in Cl.No. 6.8 (Marking)
7.6(Wormanship)	-	0	Already mentioned in Cl.No. 6.6 (Buffing & Workmanship)

15 Sep, 2025

-
-

IS 9436 (2018)

Performance requirements and methodsof test for wheels for passenger cars, quadricycles and mini goods cariers (First Revision)

Wheel Rim for Passenger Car & Mini Goods Carriers

139000 View breakup
For Ferrous All Wheel Rims used in Normal Highway Services = Rs. 79,000/- For Cold forged Aluminum 5000 Series or Aluminum Cast and Forged Wheel Rims used in Normal Highway Services = Rs. 1,39,100/- For Ferrous All Wheel Rims for Temporary Use Wheels = Rs. 71,100/- For Cold forged Aluminum 5000 Series or Aluminum Cast and Forged Wheel Rims for temporary use Wheels = Rs. 1,16,900/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1 table 2 (Cl 5.1 dynamic cornering fatigue test. Test factors and minimum cycle for requirements for wheels in normal Highway service dynamic cornering fatigue clause 5.1.3 5.1.4 and A-1 table 2)	-	16000	CFT
Cl 5.1 table 2 i)( ferrous all)	-	16000	CFT
Cl 5.1 table 2 ii)( cold formed aluminium 5000 series)	-	44445	CFT
Cl 5.1 table 2 iii)( aluminium cast and forged)	-	44445	CFT
Cl 5.1 table 4(Cl.5.2dynamic cornering fatigue test.table 4 factors and minimum cycle requirements for temporary use wheels clause5.1.4 Amd-1)	-	8000	CFT
Cl 5.1 table 4 i)( ferrous all)	-	8000	CFT
Cl 5.1 table 4 ii)( cold formed aluminium 5000 series)	-	22223	CFT
Cl 5.1 table 4 iii)( aluminium cast and forged)	-	22223	CFT
Cl.5.2 table 3(Cl 5.2 dynamic radial Fatigue testTest factors and minimum cycle for requirements for wheels in normal Highway service dynamic Radial fatigue test clause 5.2.3 5.2.4 and A-1 table 3)	-	63034	RFT
Cl 5.2 table 3 i)(ferrous all)	-	63034	RFT
Cl 5.2 table 3 i)(Alluminium All)	-	94551	RFT
Cl.5.2 table 5(Cl 5.2 dynamic radial Fatigue test Test factors and minimum cycle for temporary use wheels Dynamic Radial fatigue test clause 5.2.4 and A-1 table 5)	-	63034	RFT
Cl 5.2 table 5 i)(ferrous all)	-	63034	RFT
Cl 5.2 table 5 i)(Alluminium All)	-	94551	RFT
Cl 5.1 table 2 (Cl 5.1 dynamic cornering fatigue test. Test factors and minimum cycle for requirements for wheels in normal Highway service dynamic cornering fatigue clause 5.1.3 5.1.4 and A-1 table 2)	-	16000	CFT
Cl 5.1 table 2 i)( ferrous all)	-	16000	CFT
Cl 5.1 table 2 ii)( cold formed aluminium 5000 series)	-	44445	CFT
Cl 5.1 table 2 iii)( aluminium cast and forged)	-	44445	CFT
Cl 5.1 table 4(Cl.5.2dynamic cornering fatigue test.table 4 factors and minimum cycle requirements for temporary use wheels clause5.1.4 Amd-1)	-	8000	CFT
Cl 5.1 table 4 i)( ferrous all)	-	8000	CFT
Cl 5.1 table 4 ii)( cold formed aluminium 5000 series)	-	22223	CFT
Cl 5.1 table 4 iii)( aluminium cast and forged)	-	22223	CFT
Cl.5.2 table 3(Cl 5.2 dynamic radial Fatigue testTest factors and minimum cycle for requirements for wheels in normal Highway service dynamic Radial fatigue test clause 5.2.3 5.2.4 and A-1 table 3)	-	63034	RFT
Cl 5.2 table 3 i)(ferrous all)	-	63034	RFT
Cl 5.2 table 3 i)(Alluminium All)	-	94551	RFT
Cl.5.2 table 5(Cl 5.2 dynamic radial Fatigue test Test factors and minimum cycle for temporary use wheels Dynamic Radial fatigue test clause 5.2.4 and A-1 table 5)	-	63034	RFT
Cl 5.2 table 5 i)(ferrous all)	-	63034	RFT
Cl 5.2 table 5 i)(Alluminium All)	-	94551	RFT
Cl 5.1 table 2 (Cl 5.1 dynamic cornering fatigue test. Test factors and minimum cycle for requirements for wheels in normal Highway service dynamic cornering fatigue clause 5.1.3 5.1.4 and A-1 table 2)	-	-	-
Cl 5.1 table 2 i)( ferrous all)	-	-	-
Cl 5.1 table 2 ii)( cold formed aluminium 5000 series)	-	-	-
Cl 5.1 table 2 iii)( aluminium cast and forged)	-	-	-
Cl 5.1 table 4(Cl.5.2dynamic cornering fatigue test.table 4 factors and minimum cycle requirements for temporary use wheels clause5.1.4 Amd-1)	-	-	-
Cl 5.1 table 4 i)( ferrous all)	-	-	-
Cl 5.1 table 4 ii)( cold formed aluminium 5000 series)	-	-	-
Cl 5.1 table 4 iii)( aluminium cast and forged)	-	-	-
Cl.5.2 table 3(Cl 5.2 dynamic radial Fatigue testTest factors and minimum cycle for requirements for wheels in normal Highway service dynamic Radial fatigue test clause 5.2.3 5.2.4 and A-1 table 3)	-	-	-
Cl 5.2 table 3 i)(ferrous all)	-	-	-
Cl 5.2 table 3 i)(Alluminium All)	-	-	-
Cl.5.2 table 5(Cl 5.2 dynamic radial Fatigue test Test factors and minimum cycle for temporary use wheels Dynamic Radial fatigue test clause 5.2.4 and A-1 table 5)	-	-	-
Cl 5.2 table 5 i)(ferrous all)	-	-	-
Cl 5.2 table 5 i)(Alluminium All)	-	-	-

15 Sep, 2025

-
Included w.e.f. 31.05.2023

IS 9438 (2018)

Performance requirements and methods of tests for wheels/ rims for trucks and buses (First Revision)

Wheels/Rims for Trucks and Buses

385000 View breakup
For Ferrous Wheel Rims (CFT 18000, RFT 500000 Cycles) = Rs. 124000/- For Ferrous Wheel Rims (CFT 30000, RFT 500000 Cycles) = 132500/- For Ferrous Wheel Rims having Inset Below 100 mm (CFT 30000, RFT 700000 Cycles) = Rs. 170500/- For Ferrous Wheel Rim having Inset above 100 mm (CFT 60000, RFT 700000 Cycles) = 191500/- For Aluminum Rim (CFT 250000, RFT 1000000 Cycles) = Rs. 385000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1 table 1(cl 5.2 dynamic radial Fatigue test (For Disc Wheels and wheels with Demountable Rims, Test factors for dynamic Radial Fatigue Test Loading method and Minimum No.of Performnace cycle clause 5.2.2 and 5.2.4 table 2)	-	16000	CFT
Cl 5.1 table 1 i)(material Ferrous rim diametre 13 Accelerated test Factor 1.60)	-	16000	CFT
Cl 5.1 table 1 i)(material Ferrous rim diametre 14 Accelerated Test Factor 1.60)	-	16000	CFT
Cl 5.1 table 1 i)(material Ferrous rim diametre 15 Accelerated Test Factor 1.60)	-	16000	CFT
Cl 5.1 table 1 ii)(material Ferrous rim diametre 16 and aboveAccelerated Test Factor 1.45)	-	24333	CFT
Cl 5.1 table 1 iii)(material Ferrous rim any diametreAccelerated Test Factor 1.10)	-	45167	CFT
Cl 5.1 table 1 ii)(material Ferrous rim any diametre and above Accelerated Test Factor 1.30)	-	45167	CFT
Cl 5.1 table 1 iv)(material Alluminum rim diametre 16 and above Accelerated Test Factor 1.35)	-	177111	CFT
Cl 5.1 table 1 iv)(material Alluminum rim diametre 16 and above Accelerated Test Factor 1.63)	-	177111	CFT
Cl 5.1 table 1 v)(material Alluminum rim diametre 17.5 and larger Accelerated Test Factor 1.35)	-	177111	CFT
Cl.5.2 table 2(Cl 5.2 dynamic radial Fatigue test (For Disc Wheels and wheels with Demountable Rims, Test factors for dynamic Radial Fatigue Test Loading method and Minimum No.of Performnace cycle clause 5.2.2 and 5.2.4 table 2)	-	107822	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 13 (5˚˚ drop centre) Accelerated Test Factor 2.2, (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 13 and (5˚˚ drop centre) Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 14 and (5˚˚ drop centre) Accelerated Test Factor 2.2, (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 14 and (5˚˚ drop centre) Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 15 and (5˚˚ drop centre) Accelerated Test Factor 2.2, (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 15 and (5˚˚ drop centre) Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 16 and (5˚˚ drop centre) Accelerated Test Factor 2.2, (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 16 and (5˚˚ drop centre) Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 17 and (5˚˚ drop centre) Accelerated Test Factor 2.2, (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 17 and (5˚˚ drop centre) Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 15 Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 15 and Accelerated Test Factor 1.9 , (Inset or Outset - All ))	-	129386	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 15 and Accelerated Test Factor 1.8 , (Inset or Outset - All ))	-	145974	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 15 and Accelerated Test Factor 1.7 , (Inset or Outset - All ))	-	177254	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 15 and Accelerated Test Factor 1.6 , (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17 and Accelerated Test Factor 2.0, (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17 and Accelerated Test Factor 1.9, (Inset or Outset - All ))	-	129386	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17 and Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	145974	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17 and Accelerated Test Factor 1.7, (Inset or Outset - All ))	-	177254	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17 and Accelerated Test Factor 1.6, (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 18 and Accelerated Test Factor 2.0, (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 18 and Accelerated Test Factor 1.9, (Inset or Outset - All ))	-	129386	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 18 and Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	145974	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 18 and Accelerated Test Factor 1.7, (Inset or Outset - All ))	-	177254	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 20 and Accelerated Test Factor 2.0, (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 20 and Accelerated Test Factor 1.9 (Inset or Outset - All ))	-	129386	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 20 and Accelerated Test Factor 1.8 (Inset or Outset - All ))	-	145974	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 20 and Accelerated Test Factor 1.7, (Inset or Outset - All ))	-	177254	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22 and Accelerated Test Factor 2.0, (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22 and Accelerated Test Factor 1.9, (Inset or Outset - All ))	-	129386	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22 and Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	145974	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22 and Accelerated Test Factor 1.7, (Inset or Outset - All ))	-	177254	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22 and Accelerated Test Factor 1.6, (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24 and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24 and Accelerated Test Factor 1.9 , (Inset or Outset - All ))	-	129386	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24 and Accelerated Test Factor 1.8 , (Inset or Outset - All ))	-	145974	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24 and Accelerated Test Factor 1.7 , (Inset or Outset - All ))	-	177254	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24 and Accelerated Test Factor 1.6 , (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17.5 HC and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17.5 HC and Accelerated Test Factor 1.9 , (Inset or Outset - All ))	-	129386	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17.5 HC and Accelerated Test Factor 1.8 , (Inset or Outset - All ))	-	145974	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17.5 HC and Accelerated Test Factor 1.7 , (Inset or Outset - All ))	-	177254	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17.5 HC and Accelerated Test Factor 1.6 , (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 19.5 and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 19.5 and Accelerated Test Factor 1.9 , (Inset or Outset - All ))	-	129386	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 19.5 and Accelerated Test Factor 1.8 , (Inset or Outset - All ))	-	145974	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22.5 and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22.5 and Accelerated Test Factor 1.9 , (Inset or Outset - All ))	-	129386	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22.5 and Accelerated Test Factor 1.8 , (Inset or Outset - All ))	-	145974	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22.5 and Accelerated Test Factor 1.7 , (Inset or Outset - All ))	-	177254	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22.5 and Accelerated Test Factor 1.6 , (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24.5 and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24.5 and Accelerated Test Factor 19 , (Inset or Outset - All ))	-	129386	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24.5 and Accelerated Test Factor 1.8 , (Inset or Outset - All ))	-	145974	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24.5 and Accelerated Test Factor 1.7 , (Inset or Outset - All ))	-	177254	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24.5 and Accelerated Test Factor 1.6 , (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 iii)(Material Aluminium rim diametre 16 and Accelerated Test Factor 2.8 , (Inset or Outset - 127 or more ))	-	207350	RFT
Cl.5.2 table 2 iii)(Material Aluminium rim diametre 16 and Accelerated Test Factor 2.0 , (Inset or Outset - 127 or more ))	-	207350	RFT
Cl.5.2 table 2 iv)(Material Aluminium rim diametre 17.5 and larger . Accelerated Test Factor 2.8 , (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 iv)(Material Aluminium rim diametre 17.5 and larger . Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	207350	RFT
Cl.5.3 table 3 (Cl 5.3 dynamic Cornering Fatigue test (For wheels with Demountable Rims), Test Load factors for Wheels with demountable Rims - Dynamic cornerning Fatigue test clause 5.3.4 and 5.3.5 table 3)	-	16000	CFT
Cl.5.3 table 3 i) (Accelerated test factor 1.9 Coefficient of friction 0.7)	-	16000	CFT
Cl.5.3 table 3 i) (Material Ferrous All, Accelerated test factor 1.5 Coefficient of friction 0.7)	-	24333	CFT
Cl 5.1 table 1(cl 5.2 dynamic radial Fatigue test (For Disc Wheels and wheels with Demountable Rims, Test factors for dynamic Radial Fatigue Test Loading method and Minimum No.of Performnace cycle clause 5.2.2 and 5.2.4 table 2)	-	16000	CFT
Cl 5.1 table 1 i)(material Ferrous rim diametre 13 Accelerated test Factor 1.60)	-	16000	CFT
Cl 5.1 table 1 i)(material Ferrous rim diametre 14 Accelerated Test Factor 1.60)	-	16000	CFT
Cl 5.1 table 1 i)(material Ferrous rim diametre 15 Accelerated Test Factor 1.60)	-	16000	CFT
Cl 5.1 table 1 ii)(material Ferrous rim diametre 16 and aboveAccelerated Test Factor 1.45)	-	24333	CFT
Cl 5.1 table 1 iii)(material Ferrous rim any diametreAccelerated Test Factor 1.10)	-	45167	CFT
Cl 5.1 table 1 ii)(material Ferrous rim any diametre and above Accelerated Test Factor 1.30)	-	45167	CFT
Cl 5.1 table 1 iv)(material Alluminum rim diametre 16 and above Accelerated Test Factor 1.35)	-	177111	CFT
Cl 5.1 table 1 iv)(material Alluminum rim diametre 16 and above Accelerated Test Factor 1.63)	-	177111	CFT
Cl 5.1 table 1 v)(material Alluminum rim diametre 17.5 and larger Accelerated Test Factor 1.35)	-	177111	CFT
Cl.5.2 table 2(Cl 5.2 dynamic radial Fatigue test (For Disc Wheels and wheels with Demountable Rims, Test factors for dynamic Radial Fatigue Test Loading method and Minimum No.of Performnace cycle clause 5.2.2 and 5.2.4 table 2)	-	107822	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 13 (5˚˚ drop centre) Accelerated Test Factor 2.2, (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 13 and (5˚˚ drop centre) Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 14 and (5˚˚ drop centre) Accelerated Test Factor 2.2, (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 14 and (5˚˚ drop centre) Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 15 and (5˚˚ drop centre) Accelerated Test Factor 2.2, (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 15 and (5˚˚ drop centre) Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 16 and (5˚˚ drop centre) Accelerated Test Factor 2.2, (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 16 and (5˚˚ drop centre) Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 17 and (5˚˚ drop centre) Accelerated Test Factor 2.2, (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 i(Material Ferrous rim diametre 17 and (5˚˚ drop centre) Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 15 Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 15 and Accelerated Test Factor 1.9 , (Inset or Outset - All ))	-	129386	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 15 and Accelerated Test Factor 1.8 , (Inset or Outset - All ))	-	145974	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 15 and Accelerated Test Factor 1.7 , (Inset or Outset - All ))	-	177254	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 15 and Accelerated Test Factor 1.6 , (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17 and Accelerated Test Factor 2.0, (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17 and Accelerated Test Factor 1.9, (Inset or Outset - All ))	-	129386	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17 and Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	145974	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17 and Accelerated Test Factor 1.7, (Inset or Outset - All ))	-	177254	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17 and Accelerated Test Factor 1.6, (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 18 and Accelerated Test Factor 2.0, (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 18 and Accelerated Test Factor 1.9, (Inset or Outset - All ))	-	129386	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 18 and Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	145974	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 18 and Accelerated Test Factor 1.7, (Inset or Outset - All ))	-	177254	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 20 and Accelerated Test Factor 2.0, (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 20 and Accelerated Test Factor 1.9 (Inset or Outset - All ))	-	129386	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 20 and Accelerated Test Factor 1.8 (Inset or Outset - All ))	-	145974	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 20 and Accelerated Test Factor 1.7, (Inset or Outset - All ))	-	177254	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22 and Accelerated Test Factor 2.0, (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22 and Accelerated Test Factor 1.9, (Inset or Outset - All ))	-	129386	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22 and Accelerated Test Factor 1.8, (Inset or Outset - All ))	-	145974	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22 and Accelerated Test Factor 1.7, (Inset or Outset - All ))	-	177254	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22 and Accelerated Test Factor 1.6, (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24 and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24 and Accelerated Test Factor 1.9 , (Inset or Outset - All ))	-	129386	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24 and Accelerated Test Factor 1.8 , (Inset or Outset - All ))	-	145974	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24 and Accelerated Test Factor 1.7 , (Inset or Outset - All ))	-	177254	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24 and Accelerated Test Factor 1.6 , (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17.5 HC and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17.5 HC and Accelerated Test Factor 1.9 , (Inset or Outset - All ))	-	129386	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17.5 HC and Accelerated Test Factor 1.8 , (Inset or Outset - All ))	-	145974	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17.5 HC and Accelerated Test Factor 1.7 , (Inset or Outset - All ))	-	177254	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 17.5 HC and Accelerated Test Factor 1.6 , (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 19.5 and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 19.5 and Accelerated Test Factor 1.9 , (Inset or Outset - All ))	-	129386	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 19.5 and Accelerated Test Factor 1.8 , (Inset or Outset - All ))	-	145974	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22.5 and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	129386	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22.5 and Accelerated Test Factor 1.9 , (Inset or Outset - All ))	-	145974	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22.5 and Accelerated Test Factor 1.8 , (Inset or Outset - All ))	-	177254	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22.5 and Accelerated Test Factor 1.7 , (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 22.5 and Accelerated Test Factor 1.6 , (Inset or Outset - All ))	-	107822	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24.5 and Accelerated Test Factor 2.0 , (Inset or Outset - All ))	-	129386	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24.5 and Accelerated Test Factor 19 , (Inset or Outset - All ))	-	145974	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24.5 and Accelerated Test Factor 1.8 , (Inset or Outset - All ))	-	177254	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24.5 and Accelerated Test Factor 1.7 , (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 ii)(Material Ferrous rim diametre 24.5 and Accelerated Test Factor 1.6 , (Inset or Outset - All ))	-	207350	RFT
Cl.5.2 table 2 iii)(Material Aluminium rim diametre 16 and Accelerated Test Factor 2.0 , (Inset or Outset - 127 or more ))	-	207350	RFT
Cl.5.2 table 2 iv)(Material Aluminium rim diametre 17.5 and larger . Accelerated Test Factor 2.8 , (Inset or Outset - All ))	-	207350	RFT

15 Sep, 2025

-
Included w.e.f. 31.05.2023

IS 16192 : Part 1 (2014)

Automotive vehicles - Wheel rims for two and three wheeled vehicles: Part 1 light alloy wheel rims - Method of tests and requirements

Wheel rims for two and three wheeled vehicles

182000 View breakup
For tubeless = Rs. 1,82,000/- For Tube type = Rs. 1,79,300/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1(Rotation Bending Fatigue Test (Dynamic Cornering Fatigue Test))	-	72944	Test charges for Rotation Bending Fatigue Test (Dynamic Cornering Fatigue Test) No. of Cycles 100000
4.3.1(Radial Load Durability Test)	-	63034	Test charges for Radial Load Durability Test.No. of Cycles 500000
4.4.1(Radial Impact Resistance Test)	-	7700	Test Charges for Radial Impact Resistance Test, Marking and air leakage test
4.5.1(Torsion Moment Test)	-	38222	Test charges for Torsion Moment Test.No. of Cycles 100000
4.6.1(Air Leak Test (Tubeless Tyres Wheel Rim))	-	7700	Test Charges for Radial Impact Resistance Test, Marking and air leakage test
4.2.1(Rotation Bending Fatigue Test (Dynamic Cornering Fatigue Test))	-	72944	Test charges for Rotation Bending Fatigue Test (Dynamic Cornering Fatigue Test) No. of Cycles 100000
4.3.1(Radial Load Durability Test)	-	63034	Test charges for Radial Load Durability Test.No. of Cycles 500000
4.4.1(Radial Impact Resistance Test)	-	7700	Test Charges for Radial Impact Resistance Test, Marking and air leakage test
4.5.1(Torsion Moment Test)	-	38222	Test charges for Torsion Moment Test.No. of Cycles 100000
4.6.1(Air Leak Test (Tubeless Tyres Wheel Rim))	-	7700	Test Charges for Radial Impact Resistance Test, Marking and air leakage test

15 Sep, 2025

-
Included w.e.f. 31.05.2023

IS 16192 : Part 2 (2014)

Automotive vehicles - Wheel rims for two and three wheeled vehicles: Part 2 sheet metal wheel rims - Method of tests and requirements

Wheel Rims for Two and Three Wheeled Vehicles

110000 View breakup
For 2 Wheeler - Sheet Metal Ri (M/C)= Rs. 1,23,000/- For 2 Wheeler - Sheet Metal Rim (Scooter) = 1,10,000/- For 3 Wheeler - Sheet Metal Rim = Rs. 52,500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3.4(a) For three wheeled vehicles: 18000 load cycle)	-	16000	CFT for Three Wheeler Vehicle Sheet Metal Rim
4.2.3.4(b) For two wheeled vehicles:no of cycle 105 )	-	73000	CFT for Two wheeler Vehicle Sheet Metal Rim
4.2.4(Dynamic Radial Fatigue Test (RFT))	-	37000	RFT for Two wheeler( Scooter) Vehicle Sheet Metal Rim & Three wheeler Sheet metal Rim
4.2.3.4(a) For three wheeled vehicles: 18000 load cycle)	-	16000	CFT for Three Wheeler Vehicle Sheet Metal Rim
4.2.3.4(b) For two wheeled vehicles:no of cycle 105 )	-	73000	CFT for Two wheeler Vehicle Sheet Metal Rim
4.2.4(Dynamic Radial Fatigue Test (RFT))	-	37000	RFT for Two wheeler( Scooter) Vehicle Sheet Metal Rim & Three wheeler Sheet metal Rim
4.2.3.4(a) For three wheeled vehicles: 18000 load cycle)	-	-	-
4.2.3.4(b) For two wheeled vehicles:no of cycle 105 )	-	-	-
4.2.4(Dynamic Radial Fatigue Test (RFT))	-	-	-

15 Sep, 2025

-
Included w.e.f. 31.05.2023

Bureau of Indian Standards

The National Standards Body of India

CENTRAL INSTITUTE OF ROAD TRANSPORT

Pune Nasik Road, Bhosari, Pune, Pune, Pune, Maharashtra, 411026

9823113934 qm@cirtindia.com

Scope List