BIS - LIMS (Laboratory Information Management System)

RITES Eastern Region Laboratory

56, CR Avenue, Central Metro Station Building, KOLKATA, Kolkata, West Bengal, 700012

9073399490 erinspn@rites.com

Scope List

Reset

7 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 12650 (2018)

Textiles – Jute bags for packing 50 kg foodgrains – Specification (third revision)

6368 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4-4.1(MANUFACTURE)	-	500	per sample
4-4.2(Manufacture-The number of stitches per decimeter shall be 10 ±1.)	-	500	per sample
4-4.3(Manufacture-Safety Stitch-The number of safety union stitches per decimetre shall be10 ± 1.)	-	0	Testing charges included under Cl.4.2
4-4.5(Manufacture- Freedom from Defects )	-	300	per sample
5-5.1-Table 1-Sr. no. i)(SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 a) Out side Length , cm 94 (For both type A & Type B) Tolerance + 4 / -0 cm)	-	300	per sample
5-5.1-Table 1-Sr. no.i i)(SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Ends/dm Type A 46 + 2 /Type B 76 + 4 / -3)	-	500	per sample
5-5.1-Table 1-Sr. no.iii)(SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Picks/dm Type A 50 (2 x 25) / Type B 28 + 2)	-	0	Testing charges Rs.500 for both Ends and Picks
5-5.1-Table 1-Sr. no.iv)(SPECIFIC REQUIREMENTS-Cl. 8.5.2 of IS 9113 Corrected Mass/bag, g ( See Note 2) For both Type A & Type B 665 + 8.0 / -6.0 percent)	-	500	per sample
5-5.1-Table 1-Sr. No.v)(SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): a ) Warpway- 1570 (160) for both type A & Type B)	-	1000	per sample
5-5.1-Table 1-Sr. No.v)(SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): b ) Weftway- 1420 (145) for both type A & Type B)	-	0	Testing charges Rs.1000/- for both Wrap and Weft
5-5.1-Table 1-Sr. No.vi)(SPECIFIC REQUIREMENTS-Cl. 8.7 of IS 9113 Average side seam strength (5 cm ×20 cm raveled strip), Min, N (kgf): 490 (50) for both type A & Type B)	-	1000	per sample
5-5.1-Table 1-Sr. No.vii)(SPECIFIC REQUIREMENTS-Cl. 8.2 of IS 9113 Moisture regain, percent, Max (see Note 3) 22 for both type A & Type B)	-	750	per sample
5-5.1-Table 1-Sr. No.viii)(SPECIFIC REQUIREMENTS-Cl. 8.8 of IS 9113 Oil content on dry de-oiled material, Max 3 for both type A & Type B)	-	918	per sample
5-5.2-Table 2-Sr. No.i)(SPECIFIC REQUIREMENTS-Cl. 8.9 of IS 9113 Total number of bags per bale (see Note 1) 500 )	-	0	per sample
5-5.2-Table 2-Sr. No.ii)(SPECIFIC REQUIREMENTS- Total number of bags per bale (see Note 1) 25)	-	0	Testing charges covered under 5.5.1
5-5.2-Table 2-Sr. No.iii)(SPECIFIC REQUIREMENTS- Contract mass of a bale, kg (see Note 2) 332.5)	-	0	Testing charges covered under 5.5.1
5-5.2-Table 2-Sr. No.iv)(SPECIFIC REQUIREMENTS- Cl. 8.1 of IS 9113 Corrected net mass of a bale, kg)	-	0	Testing charges covered under 5.5.1
5-5.2-Table 2-Sr. No.v)(SPECIFIC REQUIREMENTS- Visual Number of joined bags per bundle of 25 bags )	-	0	per sample
5-5.3(SPECIFIC REQUIREMENTS - The contract moisture regain shall be 20 percent. )	-	0	Testing charges covered under 5.5.1
5-5.4-5.4.1-5.4.1.1(Additional Requirements for Labelling as Environment Friendly Products-General Requirement)	-	0	per sample
4-4.4(Manufacture-Hemming at the Mouth )	-	100	per sample

Complete

19 Mar, 2026

Exclusion: Table-3 Specific requirements for ECO mark

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

5600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1(Nominal Size)	-	100	PER SAMPLE
Cl 7.2(Weight)	-	0	Rs.100 includes for both Nominal Size ,weight, length, width, thickness
Cl 6.1(Length, Width & Thickness)	-	0	Rs.100 includes for both Nominal Size ,weight, length, width, thickness
Cl 5(Deformations and Surface Characteristics)	-	0	Pull test test Facility not available.
Cl. 8.1 Table 3(Elongation, percentage)	-	1500	Testing charges Rs.1500/- for UTS,YS,%E
Cl. 8.1 Table 3(TS/YS ratio)	-	0	Testing charges Rs.1500/- for UTS,YS,%E
Cl. 8.1 Table 3(Tensile Strength (TS))	-	0	Testing charges Rs.1500/- for UTS,YS,%E
Cl. 8.1 Table 3(Yield Stress (YS))	-	0	Testing charges Rs.1500/- for UTS,YS,%E
Cl. 7.2 Table -2 (Nominal Mass)	-	0	Rs.100 includes for both Nominal Size ,weight, length, width, thickness
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	0	Rs.100 includes for both Nominal Size ,weight, length, width, thickness, projected area
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	0	Rs.100 includes for both Nominal Size ,weight, length, width, thickness, mean area
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1000	Rs.1000/- for both bend and Re-bend test
Cl. 9.3, Table 4(Bend Test )	-	0	Rs.1000/- for both bend and Re-bend test
Cl 9.3(Load In One Direction)	-	500	per sample
Cl 8.1(UTM)	-	0	UTS CHARGE
Cl 9.4(Load In Other Direction From Bend)	-	1000	PER SAMPLE
4.1(Sulphur and phosphorous)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(CE)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1( Nitrogen%)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Ni)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Mo)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Cr)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1( Ti)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(V)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1( Aluminium %)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1( Copper %)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Silicon %)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Sulphur %)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Phosphorus %)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Manganese %)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Carbon %)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1( Nb)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	500	including
Cl. 4.3(Visual Inspection.)	-	500	including
Cl. 5.2(Surface Characteristics)	-	100	per sample
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	500	The ribs contributing the projected area - Transverse Ribs & Longitudinal Ribs
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	0	The ribs contributing the projected area - Transverse Ribs & Longitudinal Ribs
Clause 6.3(Effective Cross-sectional Area)	-	100	per sample
4.2(Boron (B))	-	800	for all chemical analysis

Complete

19 Mar, 2026

IS 15138 (2010)

Textiles – Jute bags for packing 50 kg sugar – Specification (first revision)

6368 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Fabric)	-	500	per sample
4.2 IS 9113(Seam )	-	500	per sample
4.3 IS 9113(Hemming at the Mouth )	-	500	per sample
4.4 Annex B(Freedom from Defects)	-	300	per sample
5,5.1,5.2 Table 1,i) a) Cl.8.3.2 of IS 9113 Table A / B / C( Outside length )	-	300	per sample
5,5.1,5.2 Table 1,i) b) Cl.8.3.2 of IS 9113 Table A / B / C(Outside width)	-	300	per sample
5,5.1,5.2 Table 1,ii) Cl.8.4.2 of IS 9113 Table A / B / C(Ends/dm)	-	500	per sample
5,5.1,5.2 Table 1,iii) Cl.8.4.2 of IS 9113 Table A / B / C(Picks/dm)	-	500	per sample
5,5.1,5.2 Table 1,iv) Cl.8.5.2 of IS 9113 Table A / B / C(Corrected mass per bag)	-	500	per sample
5,5.1,5.2 Table 1,v) a) Cl.8.6.2 of IS 9113 Table A / B / C(Average breaking load of sacking (ravelled strip method, 5.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	1000	per sample
5,5.1,5.2 Table 1,v) b) Cl.8.6.2 of IS 9113 Table A / B / C(Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Weftway :)	-	1000	per sample
5,5.1,5.2 Table 1,vi) a) Cl.8.7 of IS 9113 Table A / B / C( Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	1000	per sample
5,5.1,5.2 Table 1,vi) b) Cl.8.7 of IS 9113 Table A / B / C( Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Weftway :)	-	1000	per sample
5,5.1,5.2 Table 1,vii)a) Cl.8.2 of IS 9113 Table A / B / C(Moisture regain)	-	425	per sample
5,5.1,5.2 Table 1,vii)b) Table A / B / C(Contract moisture regain)	-	425	per sample
5.3 Table 2 v) Cl.8.8 of IS 9113 (Oil content on dry deoiled material basis)	-	918	per sample
5.3 Table 2 ii) ( Number of joined bags per)	-	300	per sample
5.3 Table 2 i) Cl.8.9of IS 9113 (Total number of bags per bale)	-	300	per sample
6 IS 2873(PACKING)	-	0	per sample
4.1.1(Fabric)	-	500	per sample
4.5 IS 10146(Liner)	-	0	per sample
5.3 Table 2 iii) Table A / B / C (Contract mass of a bale,)	-	500	per sample
5.3 Table 2 iv) Cl.8.1 of IS 9113 (Corrected net mass of a bale)	-	500	per sample

Complete

19 Mar, 2026

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

5100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10.2(Workmanship)	-	100	PER SAMPLE
Cl 10.2(Press)	-	1000	PER SAMPLE
Cl 10.3(Workmanship)	-	100	PER SAMPLE
Cl 11(Length, Width & Thickness)	-	100	PER SAMPLE
Cl 9(Workmanship)	-	100	PER SAMPLE
6.1(Carbon %)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(Cr)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1( Copper %)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(Manganese %)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(Mo)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(Ni)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(Phosphorus %)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(Silicon %)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(Sulphur %)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(V)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
10.1 (a)(Macro-examination)	-	1500	Testing charges Rs.1500/- for Both Micro and Sulphur print Examination
10.1 (b)(Sulphur print)	-	1500	Testing charges Rs.1500/- for Both Micro and Sulphur print Examination
6.1( Nb)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1( Ti)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1( Nitrogen%)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
Cl. 10.3(Camber)	-	500	PER SAMPLE
Clause 10.2(Bend)	-	700	PER SAMPLE
11(Dimensions)	-	500	PER SAMPLE
Clause 6, Table 1 Note : 1(Carbon Equivalent)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
Clause 6, Table 1 Note : 3(Nb+V+Ti)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6(Sulphur + Phosphorus)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830

Complete

19 Mar, 2026

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

3900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
9( FREEDOM FROM DEFECTS)	-	100	Chemical analysis charges is applicable for testing all elements as per the IS 2831
10.1.a)( Macro examination IS 11371)	-	750	Per Sample
10.1.b)( Sulphur print tests IS 12037)	-	750	Per Sample
11 & 12(DIMENSIONS and Tolerances)	-	100	Per Sample
Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Clause 6.1.1(Carbon Equivalent (CE))	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831

Complete

19 Mar, 2026

IS 16186 (2014)

Textiles - Light weight jute sacking bags for packing 50 kg foodgrains - Specification

6268 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(i)The bags shall be made from single piece of 2/1 twill weave jute sacking of uniform construction with warp running along the length of the bag. )	-	500	per sample
4.1(ii) The mass per square meter of sacking used in the fabric of the bag 504 g.)	-	500	per sample
4.2(Seam-IS 9113 (Cl.5.1.2))	-	500	per sample
4.2.i)( Type of stitches Herakle )	-	500	per sample
4.2.iii)( Stitches/dm 10 ± 1 )	-	500	per sample
4.3.ii)(Tex of jute twine )	-	500	per sample
4.3(Union Safety Stitch-IS 9113 (Cl.5.1.2))	-	500	per sample
4.3.i)( Stitches/dm 10 ± 1 )	-	500	per sample
4.4(Hemming at the mouth-IS 9113 (Cl.5.1.2))	-	500	per sample
4.4(Fabric shall be hemmed with jute yarn of 310 tex )	-	500	per sample
4.5(Freedom from defects)	-	300	per sample
4.1 & 5.1, Table 1(Dimension-IS 9113 (Cl.8.3.2))	-	300	per sample
4.1 & 5.1, Table 1(Outside Length, cm )	-	300	per sample
4.1 & 5.1, Table 1(Outside Width, cm )	-	300	per sample
4.1 & 5.1, Table 1(Ends /dm-IS 9113 (Cl.8.4.2))	-	500	per sample
4.1 & 5.1, Table 1(Picks/dm-IS 9113 (Cl.8.4.2))	-	500	per sample
4.1 & 5.1, Table 1(Corrected Mass/Bag,g-IS 9113 (Cl.8.5.2))	-	500	per sample
4.1 & 5.1, Table 1(Average Breaking Strength in N)	-	1000	per sample
4.1 & 5.1, Table 1(Warpway -IS 9113 (Cl.8.6.2))	-	500	per sample
4.1 & 5.1, Table 1(Weftway-IS 9113 (Cl.8.6.2))	-	500	per sample
4.1 & 5.1, Table 1(Average Seam Strength in N-IS 9113 (Cl.8.7))	-	1000	per sample
4.1 & 5.1, Table 1(Moisture Regain, Percent-IS 9113 (Cl.8.2))	-	750	per sample
4.1 & 5.1, Table 1(Oil content, Percent-IS 9113 (Cl.8.5.2))	-	918	per sample

Complete

19 Mar, 2026

IS 2566 (1993)

Textiles – B-twill jute bags for packing foodgrains – Specification (third revision)

5618 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl4.2( IS 9113 )(HEMING AT THE MOUTH At the mouth of the bag, the raw edges of fabric shall be turned over first to a depth of minimum 18 mm and then to a depth of 20 mm minimum and the three layers of fabric thus formed shall be hemmed with jute yarns (see 5.1.2).)	-	500	per sample
Cl4.3, Cl.4.3.1. See fig 1 & IS 9113( Seam For bags with hemming at the mouth, the sides of the bags shall be sewn with overhead or herakles stitches on selvedge through two layers of fabric ( see Fig. 1 ). The stitching shall be of even tension throughout with all the loose ends securely fastened. The number of stitches per 10 cm at the sides shall be between 9 and 11 ( see also IS 9113 : 1993 ).)	-	500	per sample
Cl4.3, Cl.4.3.1. See fig 1 & IS 9113(For bags with selvedge at the mouth, the stitching of the raw edges of the bag shall be done after turning to a depth of 38 mm, with overhead or herakle stitches through four layers of the fabric ( see Fig. 2 ). The bottom of the bag shall be stiched at selvedge through two layers of the fabric with overhead or herakle stitch as the case may be ( see also IS 9113 :1993 ).)	-	500	per sample
Cl.4.4 (IS 19113)( Joined Bag The joining shall be done in such a manner that warp and weft shall run in the same direction.)	-	300	per sample
Cl.4.5( Freedom from Defects The bags should be generally free from weaving and sewing defects which effect the performance of the bag, such as holes, cuts, tears, floats, crushed selvedges, soots, stains, gap stitches, loose ends and frayed ends.)	-	300	per sample
Cl.5.1 (IS 1954 : 1990) The bag shall conform to the requirements specified in Table 1.(i) Dimensions ( see Note ):)	-	300	per sample
Cl.5.1 1& Cl.8.5.2 of IS 9113 : 1993 The bag shall conform to the requirements specified in Table (Corrected mass per bag, g:)	-	500	per sample
Cl.5.1 (IS 1963 : 1990) The bag shall conform to the requirements specified in Table 1.(Ends per dm)	-	500	per sample
Cl.5.1 (IS 1963 : 1990) The bag shall conform to the requirements specified in Table 1.(Picks per dm)	-	500	per sample
Cl.5.1 (IS 1969 : 1990) The bag shall conform to the requirements specified in Table 1.(Breaking load of cloth ( Min ) ( revelled strip method. 10 × 20 cm ):)	-	1000	per sample
Cl.5.1 (IS 9030 : 1990) The bag shall conform to the requirements specified in Table 1.(Scam breaking load ( Min ) ( revelled strip method, 5 × 20 cm ) N ( kgf ))	-	1000	per sample
Cl.5.2 & Table 2. Cl 8.9 of IS 9113 : 1993( The bales containing the bags shall conform to the requirements as laid down in Table 2. i) Total number of bags per bale)	-	0	per sample
Cl.5.2 & Table 2. Cl 8.9 of IS 9113 : 1993( The bales containing the bags shall conform to the requirements as laid down in Table 2. ii) Number of joined bags per bundle of 25 bags)	-	0	per sample
Cl.5.2 & Table 2. Cl 8.9 of IS 9113 : 1993( The bales containing the bags shall conform to the requirements as laid down in Table 2. iv) Contract mass of a bale, kg)	-	500	per sample
Cl.5.2 & Table 2. Cl 8.1 of IS 9113 : 1993( The bales containing the bags shall conform to the requirements as laid down in Table 2. v) Correct net mass of a bale)	-	500	per sample
Cl.5.2 & Table 2. Cl 8.2 of IS 9113 : 1993( The bales containing the bags shall conform to the requirements as laid down in Table 2. v) Moisture regain percent, Max)	-	500	per sample
Cl.5.2 & Table 2. IS 2969( The bales containing the bags shall conform to the requirements as laid down in Table 2. vi) Oil content on dry deoiled material basis, percent, Max)	-	918	per sample

Complete

19 Mar, 2026

Bureau of Indian Standards

The National Standards Body of India

RITES Eastern Region Laboratory

56, CR Avenue, Central Metro Station Building, KOLKATA, Kolkata, West Bengal, 700012

9073399490 erinspn@rites.com

Scope List