BIS - LIMS (Laboratory Information Management System)

Mitsui Chemicals India Pvt. Ltd.

Plot 5 and 6, Swastik Industrial Estate, Vill: Sari, Tal: Sanand, Ahmedabad, Ahmadabad, Gujarat, 382220

9871742221 puneet.kumar@mitsuichemicals.com

Scope List

Reset

8 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 14286 : Part 1 (2023)

Terrestrial Photovoltaic PV Modules Design Qualification and Type Approval Part 1: Test Requirements (Third Revision)

1814240 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Visual inspection (MQT 01))	-	30960	-
4.2(Maximum power determination (MQT 02))	-	99360	-
4.3(Insulation test (MQT 03))	-	22770	-
4.4(Measurement of temperature coefficients (MQT 04))	-	49680	-
4.5(Placeholder section, formerly NMOT)	-	0	-
4.6(Performance at STC (MQT 06.1))	-	529200	-
4.7(Performance at low irradiance (MQT 07))	-	8280	-
4.8(Outdoor exposure test (MQT 08))	-	41472	-
4.9(Hot-spot endurance test (MQT 09))	-	120960	-
4.10(UV preconditioning test (MQT 10))	-	96336	-
4.11(Thermal cycling test (MQT 11))	-	169344	-
4.12(2 Humidity-freeze test (MQT 12))	-	63676.8	-
4.13(Damp heat test (MQT 13))	-	220563	-
4.14(Robustness of terminations (MQT 14))	-	2289.6	-
4.15(5 Wet leakage current test (MQT 15))	-	60840	-
4.16(Static mechanical load test (MQT 16))	-	24624	-
4.17(Hail test (MQT 17))	-	27216	-
4.18(Bypass diode testing (MQT 18))	-	22608	-
4.19(Stabilization (MQT 19))	-	149540	-
4.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	20520	-
4.21(Potential induced degradation test (MQT 21))	-	46800	-
4.22(Bending test (MQT 22))	-	7200	-

Complete

02 Dec, 2026

-
Included w.e.f. 04.04.2025

IS 14286 : Part 1 : Sec 1 (2023)

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-1: Special requirements for testing of crystalline silicon photovoltaic PV modules Third Revision

1814240 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8(Major visual defects)	-	0	-
Cl-11.1(Visual inspection)	-	17200	-
Cl-11.2(Maximum power determination)	-	55200	-
Cl-11.3(Insulation test)	-	12650	-
Cl-11.4(Measurement of temperature coefficients)	-	27600	-
Cl-11.5(Measurement of nominal module operating temperature)	-	0	-
Cl-11.6(Performance at STC)	-	294000	-
Cl-11.7(Performance at low irradiance)	-	4600	-
Cl-11.8(Outdoor exposure test)	-	23040	-
Cl-11.9(Hot-spot endurance test)	-	67200	-
Cl-11.10(UV preconditioning test)	-	53520	-
Cl-11.11(Thermal cycling test)	-	94080	-
Cl-11.12(Humidity-freeze test)	-	35376	-
Cl-11.13(Damp heat test)	-	122535	-
Cl-11.14(Robustness of terminations test)	-	1272	-
Cl-11.15(Wet leakage current tes)	-	33800	-
Cl-11.16(Static mechanical load test)	-	13680	-
Cl-11.17(Hail test)	-	15120	-
Cl-11.18(Bypass diode thermal test)	-	12560	-
Cl-11.19(Stabilization)	-	2100	-
5(Marking and documentation)	-	0	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	11400	-
11.21(Potential induced degradation test (MQT 21))	-	26000	-
11.22(Bending test (MQT 22))	-	4000	-
Cl-8(Major visual defects)	-	0	-
Cl-11.1(Visual inspection)	-	0	-
Cl-11.2(Maximum power determination)	-	0	-
Cl-11.3(Insulation test)	-	0	-
Cl-11.4(Measurement of temperature coefficients)	-	0	-
Cl-11.5(Measurement of nominal module operating temperature)	-	0	-
Cl-11.6(Performance at STC)	-	0	-
Cl-11.7(Performance at low irradiance)	-	0	-
Cl-11.8(Outdoor exposure test)	-	0	-
Cl-11.9(Hot-spot endurance test)	-	0	-
Cl-11.10(UV preconditioning test)	-	0	-
Cl-11.11(Thermal cycling test)	-	0	-
Cl-11.12(Humidity-freeze test)	-	0	-
Cl-11.13(Damp heat test)	-	0	-
Cl-11.14(Robustness of terminations test)	-	0	-
Cl-11.15(Wet leakage current tes)	-	0	-
Cl-11.16(Static mechanical load test)	-	0	-
Cl-11.17(Hail test)	-	0	-
Cl-11.18(Bypass diode thermal test)	-	0	-
Cl-11.19(Stabilization)	-	0	-
5(Marking and documentation)	-	0	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	0	-
11.21(Potential induced degradation test (MQT 21))	-	0	-
11.22(Bending test (MQT 22))	-	0	-
Cl-8(Major visual defects)	-	0	-
Cl-11.1(Visual inspection)	-	0	-
Cl-11.2(Maximum power determination)	-	0	-
Cl-11.3(Insulation test)	-	0	-
Cl-11.4(Measurement of temperature coefficients)	-	0	-
Cl-11.5(Measurement of nominal module operating temperature)	-	0	-
Cl-11.6(Performance at STC)	-	0	-
Cl-11.7(Performance at low irradiance)	-	0	-
Cl-11.8(Outdoor exposure test)	-	0	-
Cl-11.9(Hot-spot endurance test)	-	0	-
Cl-11.10(UV preconditioning test)	-	0	-
Cl-11.11(Thermal cycling test)	-	0	-
Cl-11.12(Humidity-freeze test)	-	0	-
Cl-11.13(Damp heat test)	-	0	-
Cl-11.14(Robustness of terminations test)	-	0	-
Cl-11.15(Wet leakage current tes)	-	0	-
Cl-11.16(Static mechanical load test)	-	0	-
Cl-11.17(Hail test)	-	0	-
Cl-11.18(Bypass diode thermal test)	-	0	-
Cl-11.19(Stabilization)	-	0	-
5(Marking and documentation)	-	0	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	0	-
11.21(Potential induced degradation test (MQT 21))	-	0	-
11.22(Bending test (MQT 22))	-	0	-

Complete

02 Dec, 2026

-
Included w.e.f. 04.04.2025

IS 14286 : Part 1 : Sec 1 (2019)

Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements: Sec 1 special requirements for testing of crystalline silicon photovoltaic (Pv) modules (Second Revision)

1298050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.1(Visual inspection (MQT 01))	-	45500	-
11.2(Maximum power determination (MQT 02))	-	45000	-
11.3(Insulation test (MQT 03))	-	10000	-
11.4(Measurement of temperature coefficients (MQT 04))	-	65000	-
11.5(Measurement of nominal module operating temperature (NMOT) (MQT 05))	-	18200	-
11.6(Performance at STC and NMOT (MQT 06))	-	5000	-
11.7(Performance at low irradiance (MQT 07))	-	5000	-
11.8(Outdoor exposure test (MQT 08))	-	52200	-
11.9(Hot-spot endurance test (MQT 09))	-	36400	-
11.1(UV preconditioning test (MQT 10))	-	36400	-
11.11(Thermal cycling test (MQT 11))	-	400000	-
11.12(Humidity-freeze test (MQT 12))	-	118800	-
11.13(Damp heat test (MQT 13))	-	18000	-
11.14(Robustness of terminations (MQT 14))	-	45500	-
11.15(Wet leakage current test (MQT 15))	-	63800	-
11.16(Static mechanical load test (MQT 16))	-	18200	-
11.17(Hail test (MQT 17))	-	22750	-
11.18(Bypass diode thermal test (MQT 18))	-	42300	-
11.19(Stabilization (MQT 19))	-	250000	-
11.1(Visual inspection (MQT 01))	-	45500	-
11.2(Maximum power determination (MQT 02))	-	45000	-
11.3(Insulation test (MQT 03))	-	10000	-
11.4(Measurement of temperature coefficients (MQT 04))	-	65000	-
11.5(Measurement of nominal module operating temperature (NMOT) (MQT 05))	-	18200	-
11.6(Performance at STC and NMOT (MQT 06))	-	5000	-
11.7(Performance at low irradiance (MQT 07))	-	5000	-
11.8(Outdoor exposure test (MQT 08))	-	52200	-
11.9(Hot-spot endurance test (MQT 09))	-	36400	-
11.1(UV preconditioning test (MQT 10))	-	36400	-
11.11(Thermal cycling test (MQT 11))	-	400000	-
11.12(Humidity-freeze test (MQT 12))	-	118800	-
11.13(Damp heat test (MQT 13))	-	18000	-
11.14(Robustness of terminations (MQT 14))	-	45500	-
11.15(Wet leakage current test (MQT 15))	-	63800	-
11.16(Static mechanical load test (MQT 16))	-	18200	-
11.17(Hail test (MQT 17))	-	22750	-
11.18(Bypass diode thermal test (MQT 18))	-	42300	-
11.19(Stabilization (MQT 19))	-	250000	-
5(Marking and documentation)	-	0	-
8(Major visual defects)	-	0	-
5(Marking and documentation)	-	0	-
8(Major visual defects)	-	0	-
11.1(Visual inspection (MQT 01))	-	-	-
11.2(Maximum power determination (MQT 02))	-	-	-
11.3(Insulation test (MQT 03))	-	-	-
11.4(Measurement of temperature coefficients (MQT 04))	-	-	-
11.5(Measurement of nominal module operating temperature (NMOT) (MQT 05))	-	-	-
11.6(Performance at STC and NMOT (MQT 06))	-	-	-
11.7(Performance at low irradiance (MQT 07))	-	-	-
11.8(Outdoor exposure test (MQT 08))	-	-	-
11.9(Hot-spot endurance test (MQT 09))	-	-	-
11.1(UV preconditioning test (MQT 10))	-	-	-
11.11(Thermal cycling test (MQT 11))	-	-	-
11.12(Humidity-freeze test (MQT 12))	-	-	-
11.13(Damp heat test (MQT 13))	-	-	-
11.14(Robustness of terminations (MQT 14))	-	-	-
11.15(Wet leakage current test (MQT 15))	-	-	-
11.16(Static mechanical load test (MQT 16))	-	-	-
11.17(Hail test (MQT 17))	-	-	-
11.18(Bypass diode thermal test (MQT 18))	-	-	-
11.19(Stabilization (MQT 19))	-	-	-
5(Marking and documentation)	-	-	-
8(Major visual defects)	-	-	-

Complete

02 Dec, 2026

-
-

IS/IEC 61730 : PART 2 (2016)

Photovoltaic (PV) module safety qualification: Part 2 requirements for testing (First Revision)

1834032 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.2 IS/IEC 61730-2( Visual inspection MST01)	-	30000	-
10.3 IS/IEC 61730-2(Performance at STC MST 02)	-	25000	-
10.4 IS/IEC 61730-2(Maximum power determination MST 03)	-	14007	-
10.5 IS/IEC 61730-2(Insulation thickness test MST 04)	-	10000	-
10.6 IS/IEC 61730-2(Durability of marking MST 05)	-	2500	-
10.7 IS/IEC 61730-2(Sharp edge test MST 06)	-	5000	-
10.8 IS/IEC 61730-2(Bypass diode functionality test MST 07)	-	10000	-
10.9 IS/IEC 61730-2(Accessibility test MST 11)	-	11690	-
10.10 IS/IEC 61730-2(Cut susceptibility test MST 12)	-	50100	-
10.11 IS/IEC 61730-2(Continuity test of equipotential bonding MST 13)	-	200000	-
10.12 IS/IEC 61730-2(Impulse voltage test MST 14)	-	9100	-
10.13 IS/IEC 61730-2( Insulation test MST 16)	-	9485	-
10.14 IS/IEC 61730-2( Wet leakage current test MST 17)	-	31850	-
10.15 IS/IEC 61730-2( Temperature test MST 21)	-	18900	-
10.16 IS/IEC 61730-2(Hot-spot endurance test MST 22)	-	27300	-
10.18 IS/IEC 61730-2(Ignitability test MST 24)	-	100000	-
10.19 IS/IEC 61730-2( Bypass diode thermal test MST 25)	-	27300	-
10.20 IS/IEC 61730-2( Reverse current overload test MST 25)	-	13300	-
10.21 IS/IEC 61730-2( Module breakage test MST 32)	-	1600	-
10.22 IS/IEC 61730-2(Screw connections test MST 33)	-	10000	-
10.23 IS/IEC 61730-2( Static Mechanical load test MST 34)	-	27300	-
10.24 IS/IEC 61730-2( Peel test MST 35)	-	4000	-
10.25 IS/IEC 61730-2( Lap shear strength test MST 36)	-	30000	-
10.26 IS/IEC 61730-2(Materials creep test MST 37)	-	27300	-
10.27 IS/IEC 61730-2( Robutness of terminations test MST 42)	-	27300	-
10.28 IS/IEC 61730-2(Thermal cycling test MST 51)	-	400000	-
10.29 IS/IEC 61730-2( Humidity-freeze test MST 52)	-	118800	-
10.30 IS/IEC 61730-2( Damp heat test MST 53)	-	100000	-
10.31 IS/IEC 61730-2(UV test MST 54)	-	118800	-
10.32 IS/IEC 61730-2( Cold conditioning MST 55)	-	36400	-
10.33 IS/IEC 61730-2( Dry heat conditioning MST 56)	-	18200	-
10.17 IS/IEC 61730-2( Fire test MST 23)	-	100000	-
10.2 IS/IEC 61730-2( Visual inspection MST01)	-	0	-
10.3 IS/IEC 61730-2(Performance at STC MST 02)	-	0	-
10.4 IS/IEC 61730-2(Maximum power determination MST 03)	-	0	-
10.5 IS/IEC 61730-2(Insulation thickness test MST 04)	-	0	-
10.6 IS/IEC 61730-2(Durability of marking MST 05)	-	0	-
10.7 IS/IEC 61730-2(Sharp edge test MST 06)	-	0	-
10.8 IS/IEC 61730-2(Bypass diode functionality test MST 07)	-	0	-
10.9 IS/IEC 61730-2(Accessibility test MST 11)	-	0	-
10.10 IS/IEC 61730-2(Cut susceptibility test MST 12)	-	0	-
10.11 IS/IEC 61730-2(Continuity test of equipotential bonding MST 13)	-	0	-
10.12 IS/IEC 61730-2(Impulse voltage test MST 14)	-	0	-
10.13 IS/IEC 61730-2( Insulation test MST 16)	-	0	-
10.14 IS/IEC 61730-2( Wet leakage current test MST 17)	-	0	-
10.15 IS/IEC 61730-2( Temperature test MST 21)	-	0	-
10.16 IS/IEC 61730-2(Hot-spot endurance test MST 22)	-	0	-
10.18 IS/IEC 61730-2(Ignitability test MST 24)	-	0	-
10.19 IS/IEC 61730-2( Bypass diode thermal test MST 25)	-	0	-
10.20 IS/IEC 61730-2( Reverse current overload test MST 25)	-	0	-
10.21 IS/IEC 61730-2( Module breakage test MST 32)	-	0	-
10.22 IS/IEC 61730-2(Screw connections test MST 33)	-	0	-
10.23 IS/IEC 61730-2( Static Mechanical load test MST 34)	-	0	-
10.24 IS/IEC 61730-2( Peel test MST 35)	-	0	-
10.25 IS/IEC 61730-2( Lap shear strength test MST 36)	-	0	-
10.26 IS/IEC 61730-2(Materials creep test MST 37)	-	0	-
10.27 IS/IEC 61730-2( Robutness of terminations test MST 42)	-	0	-
10.28 IS/IEC 61730-2(Thermal cycling test MST 51)	-	0	-
10.29 IS/IEC 61730-2( Humidity-freeze test MST 52)	-	0	-
10.30 IS/IEC 61730-2( Damp heat test MST 53)	-	0	-
10.31 IS/IEC 61730-2(UV test MST 54)	-	0	-
10.32 IS/IEC 61730-2( Cold conditioning MST 55)	-	0	-
10.33 IS/IEC 61730-2( Dry heat conditioning MST 56)	-	0	-
10.17 IS/IEC 61730-2( Fire test MST 23)	-	0	-
4.1(General)	-	0	-
4.2(Thermal Cycling (TC50))	-	0	-
4.2(Thermal Cycling (TC200))	-	0	-
4.2(Humidity Freeze (HF10))	-	0	-
4.2(Damp Heat (DH1000))	-	0	-
4.2(UV Preconditioning)	-	0	-
4.2(Cold Conditioning)	-	0	-
4.2(Dry Hot Conditioning)	-	0	-
4.3(Visual inspection)	-	0	-
4.3(Performance at STC)	-	0	-
4.3(Maximum power determination)	-	0	-
4.3(Insulation thickness)	-	0	-
4.3(Durability of markings)	-	0	-
4.3(Sharp edge test)	-	0	-
4.3(Bypass diode functionality test)	-	0	-
4.4(Accessibility test)	-	0	-
4.4(Cut susceptibility test)	-	0	-
4.4(Continuity test for equipotential bonding)	-	0	-
4.4(Impulse voltage test)	-	0	-
4.4(Insulation test)	-	0	-
4.4(Wet leakage current test)	-	0	-
4.4(Robustness of terminations test)	-	0	-
4.5(Temperature test)	-	0	-
4.5(Hot-spot endurance test)	-	0	-
4.5(Fire test)	-	0	-
4.5(Ignitability test)	-	0	-
4.5(Bypass diode thermal test)	-	0	-
4.5(Reverse current overload test)	-	0	-
4.6(Module breakage test)	-	0	-
4.6(Screw connection test)	-	0	-
4.6(Mechanical load test)	-	0	-
4.6(Peel test)	-	0	-
4.6(Lap shear strength test)	-	0	-
4.6(Materials creep test)	-	0	-
4.6(Robustness of terminations test)	-	0	-
CL. 4,4.1(61730-2)	-	0	-
CL. 4.2, 10.27, 10.28, 10.29, 10.30, 10.31, 10.32, 10.32.1, 10.32.2, 10.32.3, 10.32.4(61730-2)	-	0	-
CL. 4.3(61730-2)	-	0	-
CL. 4.4(61730-2)	-	0	-
CL. 4.5(61730-2)	-	0	-
CL. 4.6(61730-2)	-	0	-
CL. 5(Table 6)(61730-2)	-	0	-
CL. 7(61730-2)	-	0	-
CL. 8(61730-2)	-	0	-
CL. 9(61730-2)	-	0	-
CL. 10, 10.1(61730-2)	-	0	-
CL. 10.2, 10.2.1, 10.2.2, 10.2.3(61730-2)	-	0	-
CL. 10.3, 10.3.1, 10.3.2, 10.3.3(61730-2)	-	0	-
CL. 10.4, 10.4.1, 10.4.2, 10.4.3(61730-2)	-	0	-
CL. 10.5, 10.5.1, 10.5.2, 10.5.3(61730-2)	-	0	-
CL. 10.10, 10.10.1, 10.10.2, 10.10.3, 10.10.4, 10.10.5(61730-2)	-	0	-
CL. 10.6(61730-2)	-	0	-
CL. 10.7(61730-2)	-	0	-
CL. 10.8,10.8.1,10.8.2,10.8.3(61730-2)	-	0	-
CL. 10.9, 10.9.1, 10.9.2, 10.9.3,10.9.4,10.9.5(61730-2)	-	0	-
CL. 10.11, 10.11.1, 10.11.2, 10.11.3, 10.11.4, 10.11.5(61730-2)	-	0	-
CL. 10.12, 10.12.1, 10.12.2, 10.12.3, 10.12.4, 10.12.5(61730-2)	-	0	-
CL. 10.13, 10.13.1, 10.13.2, 10.13.3(61730-2)	-	0	-
CL. 10.14(61730-2)	-	0	-
CL. 10.15, 10.15.1, 10.15.2, 10.15.2.1, 10.15.2.2, 10.15.3, 10.15.3.1, 10.15.3.2, 10.15.4(61730-2)	-	0	-
CL. 10.16(61730-2)	-	0	-
CL. 10.17, 10.17.1(61730-2)	-	0	-
CL. 10.18, 10.18.1, 10.18.2, 10.18.2.1,10.18.2.2, 10.18.2.3, 10.18.2.4, 10.18.3, 10.18.3.1, 10.18.3.2,10.18.3.3, 10.18.4, 10.18.5, 10.18.5.1, 10.18.5.2, 10.18.5.3, 10.18.6, 10.18.7, 10.18.8(61730-2)	-	0	-
CL. 10.19(61730-2)	-	0	-
CL. 10.20, 10.20.1, 10.20.2, 10.20.3(61730-2)	-	0	-
CL. 10.21, 10.21.1, 10.21.2, 10.21.3, 10.21.4(61730-2)	-	0	-
CL. 10.22, 10.22.1, 10.22.1.1, 10.22.1.2, 10.22.2, 10.22.2.1, 10.22.2.2(61730-2)	-	0	-
CL. 10.23, 10.23.1(61730-2)	-	0	-
CL. 10.24, 10.24.1, 10.24.2 , 10.24.3,10.24.4 , 10.24.5(61730-2)	-	0	-
CL. 10.25, 10.25.1, 10.25.2 , 10.25.3 , 10.25.4 , 10.25.5(61730-2)	-	0	-
CL 10.26, 10.26.1, 10.26.2, 10.26.3 , 10.26.4, 10.26.5(61730-2)	-	0	-
CL 10.27(61730-2)	-	0	-
CL 10.28(61730-2)	-	0	-
CL 10.30(61730-2)	-	0	-
CL 10.31(61730-2)	-	0	-
CL 10.32, 10.32.1, 10.32.2, 10.32.3, 10.32.4(61730-2)	-	0	-
CL 10.33, 10.33.1, 10.33.2, 10.33.3, 10.33.4(61730-2)	-	0	-
Annexure B.1, B.2,B.2.1,B.2.2, B.2.3,B.3(61730-2)	-	0	-
Annexure A.1, A.2,A.3,A.4,A.5,A.6(61730-2)	-	0	-
CL 10.28(61730-2)	-	0	-

Complete

02 Dec, 2026

-
-

IS/IEC 61730 : PART 1 (2016)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction ( First Revision )

500000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 IS/IEC 61730-1( Classification, Application and Inteded Use)	-	15625	-
5, 5.1 IS/IEC 61730-1( Requirements for design and Construction)	-	15625	-
5.2(Marking and documentation)	-	15625	-
5.3.2 IS/IEC 61730-1( Internal Wiring)	-	15625	-
5.3.3 IS/IEC 61730-1( External Wirings and cables)	-	15625	-
5.3.4 IS/IEC 61730-1( Connectors)	-	15625	-
5.3.5 IS/IEC 61730-1( Junction Box for PV modules)	-	15625	-
5.3.6 IS/IEC 61730-1( Front sheet and back Sheet)	-	15625	-
5.3.7 IS/IEC 61730-1( Insulation Barrier)	-	15625	-
5.3.8 IS/IEC 61730-1( Electrical Connections)	-	15625	-
5.3.9 IS/IEC 61730-1( Encapsulants)	-	15625	-
5.3.10 IS/IEC 61730-1( Bypass Diodes)	-	15625	-
5.4, 5.4.1 IS/IEC 61730-1( Mechanical and Electromechanical connections)	-	15625	-
5.4.2 IS/IEC 61730-1( Screw Connctions)	-	15625	-
5.4.3 IS/IEC 61730-1( Rivets)	-	15625	-
5.4.4 IS/IEC 61730-1( Thread Cutting Screws)	-	15625	-
5.4.5 IS/IEC 61730-1( Form/Press/Tight/Fit)	-	15625	-
5.4.6 IS/IEC 61730-1( Connections by adhesives)	-	15625	-
5.4.7 IS/IEC 61730-1( Other Connections)	-	15625	-
5.5, 5.5.1 IS/IEC 61730-1( Materials)	-	15625	-
5.5.2.3.2 IS/IEC 61730-1( Endurance to Electrical Stress)	-	15625	-
5.5.2.3.3 IS/IEC 61730-1( Endurance to thermal stress-RTE (RTI) or TI )	-	15625	-
5.5.2.3.4 IS/IEC 61730-1( Polymeric Insulating materials used as external Parts)	-	15625	-
5.5.2.3.5 IS/IEC 61730-1(Polymeric Insulating Parts supporting live Parts)	-	15625	-
5.5.3, 5.5.3.1 IS/IEC 61730-1(Metallic materials)	-	15625	-
5.5.3.2 IS/IEC 61730-1( Current Carrying Parts)	-	15625	-
5.5.4 IS/IEC 61730-1(Adhesives)	-	15625	-
5.6, 5.6.1 IS/IEC 61730-1( Protection Agianst Electric Shock)	-	15625	-
5.6.2 IS/IEC 61730-1( Protection Agianst accessibility to hazardeous live parts)	-	15625	-
5.6.3 IS/IEC 61730-1(Insulation Coordination)	-	15625	-
5.6.3.4(Clearances and creepage distances)	-	15625	-
5.6.4 IS/IEC 61730-1( Distance through Insulation)	-	15625	-
4 IS/IEC 61730-1( Classification, Application and Inteded Use)	-	0	-
5, 5.1 IS/IEC 61730-1( Requirements for design and Construction)	-	0	-
5.2(Marking and documentation)	-	0	-
5.3.2 IS/IEC 61730-1( Internal Wiring)	-	0	-
5.3.3 IS/IEC 61730-1( External Wirings and cables)	-	0	-
5.3.4 IS/IEC 61730-1( Connectors)	-	0	-
5.3.5 IS/IEC 61730-1( Junction Box for PV modules)	-	0	-
5.3.6 IS/IEC 61730-1( Front sheet and back Sheet)	-	0	-
5.3.7 IS/IEC 61730-1( Insulation Barrier)	-	0	-
5.3.8 IS/IEC 61730-1( Electrical Connections)	-	0	-
5.3.9 IS/IEC 61730-1( Encapsulants)	-	0	-
5.3.10 IS/IEC 61730-1( Bypass Diodes)	-	0	-
5.4, 5.4.1 IS/IEC 61730-1( Mechanical and Electromechanical connections)	-	0	-
5.4.2 IS/IEC 61730-1( Screw Connctions)	-	0	-
5.4.3 IS/IEC 61730-1( Rivets)	-	0	-
5.4.4 IS/IEC 61730-1( Thread Cutting Screws)	-	0	-
5.4.5 IS/IEC 61730-1( Form/Press/Tight/Fit)	-	0	-
5.4.6 IS/IEC 61730-1( Connections by adhesives)	-	0	-
5.4.7 IS/IEC 61730-1( Other Connections)	-	0	-
5.5, 5.5.1 IS/IEC 61730-1( Materials)	-	0	-
5.5.2.3.2 IS/IEC 61730-1( Endurance to Electrical Stress)	-	0	-
5.5.2.3.3 IS/IEC 61730-1( Endurance to thermal stress-RTE (RTI) or TI )	-	0	-
5.5.2.3.4 IS/IEC 61730-1( Polymeric Insulating materials used as external Parts)	-	0	-
5.5.2.3.5 IS/IEC 61730-1(Polymeric Insulating Parts supporting live Parts)	-	0	-
5.5.3, 5.5.3.1 IS/IEC 61730-1(Metallic materials)	-	0	-
5.5.3.2 IS/IEC 61730-1( Current Carrying Parts)	-	0	-
5.5.4 IS/IEC 61730-1(Adhesives)	-	0	-
5.6, 5.6.1 IS/IEC 61730-1( Protection Agianst Electric Shock)	-	0	-
5.6.2 IS/IEC 61730-1( Protection Agianst accessibility to hazardeous live parts)	-	0	-
5.6.3 IS/IEC 61730-1(Insulation Coordination)	-	0	-
5.6.3.4(Clearances and creepage distances)	-	0	-
5.6.4 IS/IEC 61730-1( Distance through Insulation)	-	0	-
3.0(Application Classes)	-	0	-
4.0(Construction Requirements)	-	0	-
5.0(Polymeric Materials)	-	0	-
6.0(Internal Wiring and Current Carrying Parts)	-	0	-
7.0(Connections)	-	0	-
8.0(Bonding and Grounding)	-	0	-
9.0(Creepage and clearance distances)	-	0	-
10.0(Field Wiring Compartments with covers)	-	0	-
11.0(Marking)	-	0	-
12.0(Requirements of Supplied documents)	-	0	-
5.6.3 IS/IEC 61730-1(Insulation Coordination)	-	0	-
5.5.2.4 IS/IEC 61730-1(Polymeric Meterial used for Mechanical functions )	-	0	-
5.5.2 IS/IEC 61730-1( Polymeric Materials)	-	0	-
5.4.3 IS/IEC 61730-1( Rivets)	-	0	-
5.3.9 IS/IEC 61730-1( Encapsulants)	-	0	-
5.3.5 IS/IEC 61730-1( Junction Box for PV modules)	-	0	-
5.3.3 IS/IEC 61730-1( External Wirings and cables)	-	0	-
5.3, 5.3.1 IS/IEC 61730-1( Electrical Components and Insualtion)	-	0	-
5.2 IS/IEC 61730-1( Marking and Documentation)	-	0	-
5.6.4 IS/IEC 61730-1( Distance through Insulation)	-	0	-
5.5.2.4 IS/IEC 61730-1(Polymeric Meterial used for Mechanical functions )	-	0	-
5.5.2.3.4 IS/IEC 61730-1( Polymeric Insulating materials used as external Parts)	-	0	-
5.5.2.3.2 IS/IEC 61730-1( Endurance to Electrical Stress)	-	0	-
5.5.2 IS/IEC 61730-1( Polymeric Materials)	-	0	-
5.4.7 IS/IEC 61730-1( Other Connections)	-	0	-
5.3.4 IS/IEC 61730-1( Connectors)	-	0	-
5.3, 5.3.1 IS/IEC 61730-1( Electrical Components and Insualtion)	-	0	-
5.2 IS/IEC 61730-1( Marking and Documentation)	-	0	-
4(Classification, applications and intended use)	-	0	-
5.3(Electrical components and insulation)	-	0	-
5.4(Mechanical and electromechanical connections)	-	0	-
5.5(Materials)	-	0	-
5.5.2, 5.3.7(Polymeric materials)	-	0	-
5.6(Protection against electric shock)	-	0	-
5.5.2.3.3 IS/IEC 61730-1( Endurance to thermal stress-RTE (RTI) or TI )	-	0	-
5.5, 5.5.1 IS/IEC 61730-1( Materials)	-	0	-
5, 5.1 IS/IEC 61730-1( Requirements for design and Construction)	-	0	-
4 IS/IEC 61730-1( Classification, Application and Inteded Use)	-	0	-
5.6.2 IS/IEC 61730-1( Protection Agianst accessibility to hazardeous live parts)	-	0	-
5.6, 5.6.1 IS/IEC 61730-1( Protection Agianst Electric Shock)	-	0	-
5.5.4 IS/IEC 61730-1(Adhesives)	-	0	-
5.5.3.2 IS/IEC 61730-1( Current Carrying Parts)	-	0	-
5.5.3, 5.5.3.1 IS/IEC 61730-1(Metallic materials)	-	0	-
5.5.2.3.5 IS/IEC 61730-1(Polymeric Insulating Parts supporting live Parts)	-	0	-
5.4.6 IS/IEC 61730-1( Connections by adhesives)	-	0	-
5.4.5 IS/IEC 61730-1( Form/Press/Tight/Fit)	-	0	-
5.4.4 IS/IEC 61730-1( Thread Cutting Screws)	-	0	-
5.4.2 IS/IEC 61730-1( Screw Connctions)	-	0	-
5.4, 5.4.1 IS/IEC 61730-1( Mechanical and Electromechanical connections)	-	0	-
5.3.10 IS/IEC 61730-1( Bypass Diodes)	-	0	-
5.3.8 IS/IEC 61730-1( Electrical Connections)	-	0	-
5.3.7 IS/IEC 61730-1( Insulation Barrier)	-	0	-
5.3.6 IS/IEC 61730-1( Front sheet and back Sheet)	-	0	-
5.3.2 IS/IEC 61730-1( Internal Wiring)	-	0	-
5.3.2(Internal wiring)	-	0	-
5.3.4(Connectors)	-	0	-

Complete

02 Dec, 2026

-
-

IS/IEC 61730 : PART 2 (2004)

Photovoltaic (PV) Module Safety Qualification Part 2 Requirements for Testing

1273748 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Visual Inspection (MST 01))	-	50000	-
10.2(Accessibility test (MST 11))	-	11690	-
10.3(Cut susceptibility test (MST 12))	-	50100	-
10.4(Ground Continuity Test (MST 13))	-	250000	-
10.5(Impulse voltage test (MST 14))	-	9100	-
10.6(Dielectric withstand test (MST 16))	-	9485	-
10.7(Temperature test (MST 21))	-	18900	-
10.8(Fire test (MST 23))	-	200000	-
10.9(Reverse Current overload test (MST 26))	-	13300	-
10.10(Module breakage test (MST 32))	-	1600	-
11.1(Partial discharge-test (MST 15))	-	25000	-
11.2(Conduit Bending test (MST 33))	-	1600	-
11.3(Terminal box knockout tests (MST 44))	-	1600	-
Cl.5, Table 7(Thermal cycling (T200) (MST 51))	-	277000	-
Cl.5, Table 7(Thermal cycling (T50) (MST 51))	-	18200	-
Cl.5, Table 7(Humidity freeze (10HF) (MST 52))	-	118800	-
Cl.5, Table 7(Damp heat (DH1000) (MST 53))	-	268200	-
Cl.5, Table 7(UV resistance (MST 54))	-	18200	-
Cl.5, Table 7(Wet leakage current test (MST 17))	-	31850	-
Cl.5, Table 7(Robustness of termination test (MST 42))	-	27300	-
Cl.5, Table 7(Hot spot test (MST 22))	-	27300	-
Cl.5, Table 7(Mechanical load test (MST 34))	-	38200	-

Complete

02 Dec, 2026

-
-

IS/IEC 61730 : PART 1 (2004)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction

250000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Application classes)	-	25000	-
4(Construction requirements)	-	25000	-
5(Polymeric materials)	-	25000	-
6(Internal wiring and current-carrying parts)	-	25000	-
7(Connections)	-	25000	-
8(Bonding and grounding)	-	25000	-
9(Creepage and clearance distances)	-	50000	-
10(Field wiring compartments with covers)	-	25000	-
11(Marking)	-	25000	-

Complete

02 Dec, 2026

-
-

IS 14286 (2010)

Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval (First Revision)

Solar Photovoltaic Modules

1280550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Marking)	-	50000	-
10.1(Visual inspection)	-	39033	-
10.2(Maximum power determination)	-	49662	-
10.3(Insulation test)	-	20840	-
10.4(Measurement of temperature coefficients)	-	65000	-
10.5(Measurement of NOCT)	-	38200	-
10.6(Performance at STC and NOCT)	-	49662	-
10.7(Performance at low irradiance)	-	7500	-
10.8(Outdoor exposure test)	-	52200	-
10.9(Hot-spot endurance test)	-	33318	-
10.10(UV preconditioning)	-	36400	-
10.11(Thermal cycling test)	-	372400	-
10.12(Humidity freeze test)	-	136400	-
10.13(Damp heat test)	-	318000	-
10.14(Robustness of termination test)	-	45500	-
10.15(Wet leakage current test)	-	163800	-
10.16(Mechanical load test)	-	38200	-
10.17(Hail test)	-	22750	-
10.18(Bypass diode thermal' test)	-	42300	-

Complete

02 Dec, 2026

-
-

Bureau of Indian Standards

The National Standards Body of India

Mitsui Chemicals India Pvt. Ltd.

Plot 5 and 6, Swastik Industrial Estate, Vill: Sari, Tal: Sanand, Ahmedabad, Ahmadabad, Gujarat, 382220

9871742221 puneet.kumar@mitsuichemicals.com

Scope List