BIS - LIMS (Laboratory Information Management System)

HEXIQON LABORATORY PRIVATE LIMITED

PLOT NO 8, SHAYONA ESTATE PART-2, NR.LAMBDA RESEARCH LABORATORY,NR.AUDA WATER TANK,, GOTA,, AHMEDABAD, Ahmadabad, Gujarat, 382481

8487878021 hexiqonlab@gmail.com

Scope List

Reset

19 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 2556 : Part 16 (2024)

Vitreous China Sanitary Appliances âSpecification Part 16 Specific Requirements of Washdown Wall Mounted Water Closets (First Revision)

Pattern 1, Pattern 2 and any other patterns and sizes

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3(GENERAL REQUIREMENTS)	-	3000	-
Cl-4(PATTERNS)	-	200	-
Cl-5(DIMENSIONS AND TOLERANCES)	-	4000	-
Cl-6(CONSTRUCTION)	-	800	-
Cl-7(FINISH)	-	200	-
Cl-8.1(Toilet Paper Test)	-	200	-
Cl-8.2(Smudge Test)	-	200	-
Cl-8.3(Holding Capacity Test)	-	200	-
Cl-8.4(Single Ball Test)	-	200	-
Cl-9(LOAD TEST)	-	1000	-
Cl-11("ADDITIONAL REQUIREMENTS FOR WATER EFFICIENCY")	-	3000	-

Complete

07 Feb, 2027

-
Included w.e.f.03.04.2025

IS 2556 : Part 15 (2024)

Vitreous China Sanitary Appliances âSpecification Part 15 Specific Requirements of Universal Water Closets (Third Revision)

Size 1, Size 2 and any other sizes

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3(GENERAL REQUIREMENTS)	-	3000	-
Cl-4(SIZES)	-	200	-
Cl-5(DIMENSIONS AND TOLERANCES)	-	3000	-
Cl-6(CONSTRUCTION)	-	500	-
Cl-7(FINISH)	-	200	-
Cl-6.3(Two-Piece Bend)	-	500	-
Cl-8.1(Universal water)	-	1400	-
Cl-8.2(Toilet Paper Test)	-	200	-
Cl-8.3(Smudge Test)	-	200	-
Cl-8.4(Holding Capacity Test)	-	200	-
Cl-8.5.1(Single Ball Test)	-	200	-
Cl-8.5.2(Fifty Ball Test)	-	200	-
Cl-8.6(Fifty Ball Test)	-	200	-
Cl-8.7(Splash Test)	-	200	-
Cl-9(LOAD BEARING TEST)	-	1000	-
Cl-11("ADDITIONAL REQUIREMENTS FOR WATER EFFICIENCY")	-	3000	-

Complete

07 Feb, 2027

-
Included w.e.f.03.04.2025

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

All

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1(Escherichia Coli)	-	400	-
5.2.2(Coliform)	-	400	-
5.2.3(Faecal Streptococci & Staphylococcus aureus)	-	1100	-
5.2.4(Sulphite Reducing Anaerobes)	-	550	-
5.2.5(Pseudomonas aeruginosa)	-	650	-
5.2.6(Aerobic Microbial Count @ 22 o C & 37o C)	-	300	-
5.2.7(Yeast & Mould)	-	750	-
5.2.8(Salmonella & Shigella)	-	1100	-
5.2.9(Vibrio Cholera & Vibrio parahaemolyicus)	-	1100	-
5.3(Appearance)	-	100	-
5.3/Table 1/i(Colour)	-	450	-
5.3/Table 1/ii(Odour)	-	100	-
5.3/Table 1/iii(Taste)	-	100	-
5.3/Table 1/iv(Turbidity)	-	100	-
5.3/Table 1/v(Total Dissolved Solids)	-	500	-
5.3/Table 1/vi(pH)	-	200	-
5.3/Table 2/i(Barium)	-	1500	-
5.3/Table 2/ii(Copper)	-	2500	-
5.3/Table 2/iii(Iron)	-	2500	-
5.3/Table 2/iv(Maganese)	-	2500	-
5.3/Table 2/v(Nitrate)	-	400	-
5.3/Table 2/vi(Nitrite)	-	400	-
5.3/Table 2/vii(Fluoride)	-	400	-
5.3/Table 2/viii(Zinc)	-	1500	-
5.3/Table 2/ix(Silver)	-	1500	-
5.3/Table 2/x(Aluminium)	-	2500	-
5.3/Table 2/xi(Chloride)	-	400	-
5.3/Table 2/xii(Selenium)	-	2500	-
5.3/Table 2/xiii(Suphate)	-	400	-
5.3/Table 2/xiv(Alkalinity)	-	400	-
5.3/Table 2/xv(Calcium)	-	1500	-
5.3/Table 2/xvi(Magnesium)	-	1500	-
5.3/Table 2/xvii(Sodium)	-	350	-
5.3/Table 2/xviii(Residual Free Chlorine)	-	400	-
5.3/Table 2/xix(Phenolic Compounds)	-	400	-
5.3/Table 2/xx(Mineral Oil)	-	800	-
5.3/Table 2/xxi(Anionic Surface- Active Agents as MBAS)	-	400	-
5.3/Table 2/xxii(Sulphide)	-	400	-
5.3/Table 2/xxiii(Antinomy)	-	2500	-
5.3/Table 2/xxiv(Borates)	-	1500	-
5.3/Table 2/xxxv(Bromate)	-	1500	-
5.3/Table 3/i(Mercury)	-	2500	-
5.3/Table 3/ii(Cadmium)	-	2500	-
5.3/Table 3/iv(Cyanide)	-	400	-
5.3/Table 3/v(Lead)	-	2500	-
5.3/Table 3/vi(Chromium)	-	2500	-
5.3/Table 3/vii(Nickel)	-	2500	-
5.3/Table 3/viii(Polyclorinated biphenyl (PCB))	-	3000	-
5.3/Table 3/ix(Polynuclear Aromatic Hydrocarbons)	-	3000	-
5.3/Table 3/x(Uranium)	-	2500	-
5.4/Annex D/i(P,P-DDT)	-	3000	-
5.4/Annex D/ii(Lindane)	-	3000	-
5.4/Annex D/iv(b-Endosulfan)	-	3000	-
5.4/Annex D/xvi(Dieldrin)	-	3000	-
5.4/Annex D/xvi(Aldrin)	-	3000	-
5.4/Annex D/i(O,P-DDT)	-	3000	-
5.4/Annex D/iv(a-Endosulfan)	-	3000	-
5.4/Annex D/iii(d-HCH)	-	3000	-
5.4/Annex D/i(O,P-DDD)	-	3000	-
5.4/Annex D/i(P,P-DDE)	-	3000	-
5.4/Annex D/i(O,P-DDE)	-	3000	-
5.4/Annex D/iii(a-HCH)	-	3000	-
5.4/Annex D/iii(β- HCH)	-	3000	-
5.4/Annex D/iv(Endosulfan sulfate)	-	3000	-
5.4/Annex D/i(P,P-DDD)	-	3000	-
5.4/Annex D/xii(Alachlor)	-	3000	-
5.4/Annex D/vii(Chlorpyrifos)	-	3000	-
5.4/Annex D/x(Butachlor)	-	3000	-
5.4/Annex D/vi(Ethion)	-	3000	-
5.4/Annex D/xiv(Methyl parathion)	-	3000	-
5.4/Annex D/xv(Malathion)	-	3000	-
5.4/Annex D/viii(Phorate)	-	3000	-
5.4/Annex D/v(Monochrotophos)	-	3000	-
5.4/Annex D/xiii(Atrazine)	-	3000	-
5.4/Annex D/viii(Phorate sulphoxide)	-	3000	-
5.4/Annex D/viii(Phorate sulfone)	-	3000	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	3000	-
5.4/Annex D/xxviii(Malaoxon)	-	3000	-
5.4/Annex D/xi(Isoproturon)	-	1500	-
5.4/Annex D/ix(2,4 –D)	-	1500	-
5.4/Annex D/xxxi(Total Pesticide Residue)	-	3000	-
Cl-5.1(General Requirements)	-	100	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	400	-
Cl-5.2.2(Coliform)	-	400	-
Cl-5.2.3(Staphylococcus aureus)	-	550	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	550	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	650	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	300	-
Cl-5.2.7(Yeast and mould)	-	750	-
Cl-5.2.8(Salmonella)	-	550	-
Cl-5.2.9(Vibrio cholera)	-	550	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	450	-
Cl-5.3, Table-1 (ii)(Odour)	-	100	-
Cl-5.3, Table-1 (iii)(Taste)	-	100	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	100	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	500	-
Cl-5.3, Table-1 (vi)(pH)	-	200	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	1500	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	2500	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	2500	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	2500	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	400	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	400	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	400	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	1500	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	1500	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	2500	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	400	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	2500	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	400	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	400	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	1500	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	1500	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	350	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	400	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	400	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	800	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	400	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	400	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	2500	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	1500	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	1500	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	2500	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	2500	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	2500	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	400	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	2500	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	2500	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	2500	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	3000	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	3000	-
Cl-5.3, Table-3 (x)(Uranium)	-	2500	-
Cl-5.2.3(Faecal streptococci)	-	550	-
Cl-5.2.8(shigella)	-	550	-
Cl-5.2.9(V.parahaemolyticus)	-	550	-
5.3/Table 3/iii(Arsenic)	-	2500	-
5.2.1(Escherichia Coli)	-	400	-
5.2.2(Coliform)	-	400	-
5.2.3(Faecal Streptococci & Staphylococcus aureus)	-	1100	-
5.2.4(Sulphite Reducing Anaerobes)	-	550	-
5.2.5(Pseudomonas aeruginosa)	-	650	-
5.2.6(Aerobic Microbial Count @ 22 o C & 37o C)	-	300	-
5.2.7(Yeast & Mould)	-	750	-
5.2.8(Salmonella & Shigella)	-	1100	-
5.2.9(Vibrio Cholera & Vibrio parahaemolyicus)	-	1100	-
5.3(Appearance)	-	100	-
5.3/Table 1/i(Colour)	-	450	-
5.3/Table 1/ii(Odour)	-	450	-
5.3/Table 1/iii(Taste)	-	100	-
5.3/Table 1/iv(Turbidity)	-	100	-
5.3/Table 1/v(Total Dissolved Solids)	-	500	-
5.3/Table 1/vi(pH)	-	200	-
5.3/Table 2/i(Barium)	-	1500	-
5.3/Table 2/ii(Copper)	-	2500	-
5.3/Table 2/iii(Iron)	-	2500	-
5.3/Table 2/iv(Maganese)	-	2500	-
5.3/Table 2/v(Nitrate)	-	400	-
5.3/Table 2/vi(Nitrite)	-	400	-
5.3/Table 2/vii(Fluoride)	-	400	-
5.3/Table 2/viii(Zinc)	-	1500	-
5.3/Table 2/ix(Silver)	-	1500	-
5.3/Table 2/x(Aluminium)	-	2500	-
5.3/Table 2/xi(Chloride)	-	400	-
5.3/Table 2/xii(Selenium)	-	2500	-
5.3/Table 2/xiii(Suphate)	-	400	-
5.3/Table 2/xiv(Alkalinity)	-	400	-
5.3/Table 2/xv(Calcium)	-	1500	-
5.3/Table 2/xvi(Magnesium)	-	1500	-
5.3/Table 2/xvii(Sodium)	-	350	-
5.3/Table 2/xviii(Residual Free Chlorine)	-	400	-
5.3/Table 2/xix(Phenolic Compounds)	-	400	-
5.3/Table 2/xx(Mineral Oil)	-	800	-
5.3/Table 2/xxi(Anionic Surface- Active Agents as MBAS)	-	400	-
5.3/Table 2/xxii(Sulphide)	-	400	-
5.3/Table 2/xxiii(Antinomy)	-	2500	-
5.3/Table 2/xxiv(Borates)	-	1500	-
5.3/Table 2/xxxv(Bromate)	-	1500	-
5.3/Table 3/i(Mercury)	-	2500	-
5.3/Table 3/ii(Cadmium)	-	2500	-
5.3/Table 3/iv(Cyanide)	-	400	-
5.3/Table 3/v(Lead)	-	2500	-
5.3/Table 3/vi(Chromium)	-	2500	-
5.3/Table 3/vii(Nickel)	-	2500	-
5.3/Table 3/viii(Polyclorinated biphenyl (PCB))	-	3000	-
5.3/Table 3/ix(Polynuclear Aromatic Hydrocarbons)	-	3000	-
5.3/Table 3/x(Uranium)	-	2500	-
5.4/Annex D/i(P,P-DDT)	-	3000	-
5.4/Annex D/ii(Lindane)	-	3000	-
5.4/Annex D/iv(b-Endosulfan)	-	3000	-
5.4/Annex D/xvi(Dieldrin)	-	3000	-
5.4/Annex D/xvi(Aldrin)	-	3000	-
5.4/Annex D/i(O,P-DDT)	-	3000	-
5.4/Annex D/iv(a-Endosulfan)	-	3000	-
5.4/Annex D/iii(d-HCH)	-	3000	-
5.4/Annex D/i(O,P-DDD)	-	3000	-
5.4/Annex D/i(P,P-DDE)	-	3000	-
5.4/Annex D/i(O,P-DDE)	-	3000	-
5.4/Annex D/iii(a-HCH)	-	3000	-
5.4/Annex D/iii(β- HCH)	-	3000	-
5.4/Annex D/iv(Endosulfan sulfate)	-	3000	-
5.4/Annex D/i(P,P-DDD)	-	3000	-
5.4/Annex D/xii(Alachlor)	-	3000	-
5.4/Annex D/vii(Chlorpyrifos)	-	3000	-
5.4/Annex D/x(Butachlor)	-	3000	-
5.4/Annex D/vi(Ethion)	-	3000	-
5.4/Annex D/xiv(Methyl parathion)	-	3000	-
5.4/Annex D/xv(Malathion)	-	3000	-
5.4/Annex D/viii(Phorate)	-	3000	-
5.4/Annex D/v(Monochrotophos)	-	3000	-
5.4/Annex D/xiii(Atrazine)	-	3000	-
5.4/Annex D/viii(Phorate sulphoxide)	-	3000	-
5.4/Annex D/viii(Phorate sulfone)	-	3000	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	3000	-
5.4/Annex D/xxviii(Malaoxon)	-	3000	-
5.4/Annex D/xi(Isoproturon)	-	1500	-
5.4/Annex D/ix(2,4 –D)	-	1500	-
5.4/Annex D/xxxi(Total Pesticide Residue)	-	3000	-
Cl-5.1(General Requirements)	-	100	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	400	-
Cl-5.2.2(Coliform)	-	400	-
Cl-5.2.3(Staphylococcus aureus)	-	550	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	550	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	650	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	300	-
Cl-5.2.7(Yeast and mould)	-	750	-
Cl-5.2.8(Salmonella)	-	550	-
Cl-5.2.9(Vibrio cholera)	-	550	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	450	-
Cl-5.3, Table-1 (ii)(Odour)	-	100	-
Cl-5.3, Table-1 (iii)(Taste)	-	100	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	100	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	500	-
Cl-5.3, Table-1 (vi)(pH)	-	200	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	1500	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	2500	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	2500	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	2500	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	400	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	400	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	400	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	1500	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	1500	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	2500	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	400	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	2500	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	400	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	400	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	1500	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	1500	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	350	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	400	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	400	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	800	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	400	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	400	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	2500	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	1500	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	1500	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	2500	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	2500	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	2500	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	400	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	2500	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	2500	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	2500	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	3000	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	3000	-
Cl-5.3, Table-3 (x)(Uranium)	-	2500	-
Cl-5.2.3(Faecal streptococci)	-	550	-
Cl-5.2.8(shigella)	-	550	-
Cl-5.2.9(V.parahaemolyticus)	-	550	-
5.3/Table 3/iii(Arsenic)	-	2500	-
5.2.1(Escherichia Coli)	-	400	-
5.2.2(Coliform)	-	400	-
5.2.3(Faecal Streptococci & Staphylococcus aureus)	-	1100	-
5.2.4(Sulphite Reducing Anaerobes)	-	550	-
5.2.5(Pseudomonas aeruginosa)	-	650	-
5.2.6(Aerobic Microbial Count @ 22 o C & 37o C)	-	300	-
5.2.7(Yeast & Mould)	-	750	-
5.2.8(Salmonella & Shigella)	-	1100	-
5.2.9(Vibrio Cholera & Vibrio parahaemolyicus)	-	1100	-
5.3(Appearance)	-	100	-
5.3/Table 1/i(Colour)	-	450	-
5.3/Table 1/ii(Odour)	-	100	-
5.3/Table 1/iii(Taste)	-	100	-
5.3/Table 1/iv(Turbidity)	-	100	-
5.3/Table 1/v(Total Dissolved Solids)	-	500	-
5.3/Table 1/vi(pH)	-	200	-
5.3/Table 2/i(Barium)	-	1500	-
5.3/Table 2/ii(Copper)	-	2500	-
5.3/Table 2/iii(Iron)	-	2500	-
5.3/Table 2/iv(Maganese)	-	2500	-
5.3/Table 2/v(Nitrate)	-	400	-
5.3/Table 2/vi(Nitrite)	-	400	-
5.3/Table 2/vii(Fluoride)	-	400	-
5.3/Table 2/viii(Zinc)	-	1500	-
5.3/Table 2/ix(Silver)	-	2500	-
5.3/Table 2/x(Aluminium)	-	2500	-
5.3/Table 2/xi(Chloride)	-	400	-
5.3/Table 2/xii(Selenium)	-	2500	-
5.3/Table 2/xiii(Suphate)	-	400	-
5.3/Table 2/xiv(Alkalinity)	-	400	-
5.3/Table 2/xv(Calcium)	-	1500	-
5.3/Table 2/xvi(Magnesium)	-	1500	-
5.3/Table 2/xvii(Sodium)	-	350	-
5.3/Table 2/xviii(Residual Free Chlorine)	-	400	-
5.3/Table 2/xix(Phenolic Compounds)	-	3000	-
5.3/Table 2/xx(Mineral Oil)	-	800	-
5.3/Table 2/xxi(Anionic Surface- Active Agents as MBAS)	-	400	-
5.3/Table 2/xxii(Sulphide)	-	400	-
5.3/Table 2/xxiii(Antinomy)	-	2500	-
5.3/Table 2/xxiv(Borates)	-	1500	-
5.3/Table 2/xxxv(Bromate)	-	1500	-
5.3/Table 3/i(Mercury)	-	2500	-
5.3/Table 3/ii(Cadmium)	-	2500	-
5.3/Table 3/iv(Cyanide)	-	400	-
5.3/Table 3/v(Lead)	-	2500	-
5.3/Table 3/vi(Chromium)	-	2500	-
5.3/Table 3/vii(Nickel)	-	2500	-
5.3/Table 3/viii(Polyclorinated biphenyl (PCB))	-	3000	-
5.3/Table 3/ix(Polynuclear Aromatic Hydrocarbons)	-	3000	-
5.3/Table 3/x(Uranium)	-	2500	-
5.4/Annex D/i(P,P-DDT)	-	3000	-
5.4/Annex D/ii(Lindane)	-	3000	-
5.4/Annex D/iv(b-Endosulfan)	-	3000	-
5.4/Annex D/xvi(Dieldrin)	-	3000	-
5.4/Annex D/xvi(Aldrin)	-	3000	-
5.4/Annex D/i(O,P-DDT)	-	3000	-
5.4/Annex D/iv(a-Endosulfan)	-	3000	-
5.4/Annex D/iii(d-HCH)	-	3000	-
5.4/Annex D/i(O,P-DDD)	-	3000	-
5.4/Annex D/i(P,P-DDE)	-	3000	-
5.4/Annex D/i(O,P-DDE)	-	3000	-
5.4/Annex D/iii(a-HCH)	-	3000	-
5.4/Annex D/iii(β- HCH)	-	3000	-
5.4/Annex D/iv(Endosulfan sulfate)	-	3000	-
5.4/Annex D/i(P,P-DDD)	-	3000	-
5.4/Annex D/xii(Alachlor)	-	3000	-
5.4/Annex D/vii(Chlorpyrifos)	-	3000	-
5.4/Annex D/x(Butachlor)	-	3000	-
5.4/Annex D/vi(Ethion)	-	3000	-
5.4/Annex D/xiv(Methyl parathion)	-	3000	-
5.4/Annex D/xv(Malathion)	-	3000	-
5.4/Annex D/viii(Phorate)	-	3000	-
5.4/Annex D/v(Monochrotophos)	-	3000	-
5.4/Annex D/xiii(Atrazine)	-	3000	-
5.4/Annex D/viii(Phorate sulphoxide)	-	3000	-
5.4/Annex D/viii(Phorate sulfone)	-	3000	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	3000	-
5.4/Annex D/xxviii(Malaoxon)	-	3000	-
5.4/Annex D/xi(Isoproturon)	-	1500	-
5.4/Annex D/ix(2,4 –D)	-	1500	-
5.4/Annex D/xxxi(Total Pesticide Residue)	-	3000	-
Cl-5.1(General Requirements)	-	100	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	400	-
Cl-5.2.2(Coliform)	-	400	-
Cl-5.2.3(Staphylococcus aureus)	-	550	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	550	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	650	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	300	-
Cl-5.2.7(Yeast and mould)	-	750	-
Cl-5.2.8(Salmonella)	-	550	-
Cl-5.2.9(Vibrio cholera)	-	550	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	450	-
Cl-5.3, Table-1 (ii)(Odour)	-	100	-
Cl-5.3, Table-1 (iii)(Taste)	-	100	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	100	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	500	-
Cl-5.3, Table-1 (vi)(pH)	-	200	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	1500	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	2500	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	2500	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	2500	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	400	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	400	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	400	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	1500	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	1500	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	2500	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	400	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	2500	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	400	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	400	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	1500	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	1500	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	350	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	400	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	400	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	800	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	400	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	400	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	2500	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	1500	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	1500	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	2500	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	2500	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	2500	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	400	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	2500	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	2500	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	2500	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	3000	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	3000	-
Cl-5.3, Table-3 (x)(Uranium)	-	2500	-
Cl-5.2.3(Faecal streptococci)	-	550	-
Cl-5.2.8(shigella)	-	550	-
Cl-5.2.9(V.parahaemolyticus)	-	550	-
5.3/Table 3/iii(Arsenic)	-	2500	-

Complete

07 Feb, 2027

-
Included w.e.f. 22.08.2024 Exclusion: Cl.5.3 Table-4 (i) Alpha Emitters, Cl.5.3 Table-4 (ii) Beta Emitters

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

100 ml to 25000 ml /PET, PP, PC, PE, PVC, PBT, PS

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0 (chem)(MATERIAL)	-	600	NA
4.6.2(TRANSPARANCY)	-	250	NA
4.6.3(LEAKAGE TEST)	-	1450	NA
4.6.4(DROP TEST)	-	300	NA
4.6.5(MIGRATION TEST)	-	1500	NA
4.6.6(PORTABILITY TEST)	-	2500	NA
4.6.6 (chem)(Water Potability test (after 30 days) (a) Taste (b) Odour)	-	2500	NA
4.6.5.1 (chem)(Colour migration (Caps))	-	1500	NA
4.6.5.1 (chem)(Colour migration (Container))	-	1500	NA
4.6.5 , IS:9845:1998 (chem)(Migration of Caps - a. Amount of extractive)	-	1500	NA
4.6.5 , IS:9845:1998 (chem)(Migration- b. Amount of extractive)	-	1500	NA
4.6.5 , IS:9845:1998 (chem)(Migration- a. Amount of extractive)	-	1500	NA
4.6.4, clause 8 of IS:2798:1998(Drop test )	-	300	NA
4.6.3, clause 6 of IS:2798:1998(Leakage test- c. Air pressure leakage)	-	1450	NA
4.6.3, clause 6 of IS:2798:1998(Leakage test- b. Vibration leakage)	-	1450	NA
4.6.3, clause 6 of IS:2798:1998(Leakage test- a. Closure leakage )	-	1450	NA
4.6.2.1, Annex A(Transparency (Blue tint in polycarbonate & PET containers of 5 litre and above capacity))	-	250	NA
4.6.2 Annex A(Transparency)	-	250	NA
4.5, IS:2798:1998(Wall thickness- Bottom, in mm)	-	250	NA
4.5, IS:2798:1998(Wall thickness- Middle , in mm)	-	250	NA
4.5, IS:2798:1998(Wall thickness- Top , in mm )	-	250	NA
4.4 , clause 5 of IS:2798:1998(Brimful capacity in ml)	-	500	NA
4.3(Workmanship, Finish & Appearance)	-	50	NA
4.2(Design, Shape & Dimension )	-	50	NA
4.1(Material)	-	600	NA
Cl. 4.5(Cl. 4.5 Wall Thickness (Bottom))	-	250	NA
Cl. 4.5(Cl. 4.5 Wall Thickness (Middle))	-	250	NA
Cl. 4.5(Cl. 4.5 Wall Thickness (Top))	-	250	NA
Cl. 4.4 (a)(Capacity)	-	250	NA
Cl. 4.3.2(Cl. 4.3.2 Finish & Appearance)	-	50	NA
Cl. 4.2(Cl. 4.2 Design, Shape & Dimension)	-	50	NA
Cl. 4.6.5 (chem)(Cl. 4.6.5 Color migration (Caps))	-	1500	NA
Cl. 4.6.5 (chem)(Cl. 4.6.5 Overall migration (Caps))	-	1500	NA
Cl. 4.6.5(Cl. 4.6.5 Migration)	-	1500	NA
Cl. 4.6.3(Cl. 4.6.3 Air Pressure Leakage)	-	1450	NA
Cl. 4.6.3(Cl. 4.6.3 Vibration Leakage)	-	1450	NA
Cl. 4.6.3( Cl. 4.6.3 Closure Leakage)	-	1450	NA
4.6.2.1, Annex-A(Transparency of container)	-	250	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ix)("Specific migration for Cap,Phthalic acid, bis(2-ethylhexyl) ester (DEHP)")	-	1500	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(viii)(Specific migration for Cap,Antimony)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vii)(Specific migration for Cap,Zinc)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vi)(Specific migration for Cap,Manganese)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(v)(Specific migration for Cap,Lithium)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iv)(Specific migration for Cap,Iron)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iii)(Specific migration for Cap,Copper)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ii)(Specific migration for Cap,Cobalt)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(i)(Specific migration for Cap,Barium)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ix)("Specific migration for container,Phthalic acid, bis(2-ethylhexyl) ester (DEHP)")	-	1500	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(viii)(Specific migration for container,Antimony)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vii)(Specific migration for container,Zinc)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vi)(Specific migration for container,Manganese)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(v)(Specific migration for container,Lithium)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iv)(Specific migration for container,Iron)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iii)(Specific migration for container,Copper)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ii)(Specific migration for container,Cobalt)	-	700	NA
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(i)(Specific migration for container,Barium)	-	700	NA
Clauses 5.3.9.2 and 5.3.9.3,Table 3, S.no.(ix)(Phthalic acid, bis(2-ethylhexyl)ester (DEHP)-ISO 18856)	-	1500	NA

Complete

07 Feb, 2027

-
Amendment No. 6 w.e.f. 29.12.2022

IS 2556 : Part 6 (1995)

Vitreous sanitary appliances (Vitreous China): Part 6 specific requirements of urinals and partition plates

All Sizes and Grade

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Patterns and Size)	-	500	NA
Cl 5(Dimensions & Tolerances)	-	2000	NA
Cl 6(Construction)	-	200	NA
Cl 7(Finish)	-	50	NA
Cl 8(Cleanability Test)	-	700	NA

Complete

07 Feb, 2027

-
-

IS 2556 : Part 7 (1995)

Vitreous sanitary appliances (Vitreous China) - specification: Part 7 specific requirements of accessories for sanitary appliances

All Type and Sizes

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Wavy finiah-IS 2556 (Part 1))	-	50	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Warpage -IS 2556 (Part 1))	-	100	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Discoloration-IS 2556 (Part 1))	-	50	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-·Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Spots. blisters and pinholes-IS 2556 (Part 1))	-	50	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Bubbles and specks-IS 2556 (Part 1))	-	50	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing Marks-IS 2556 (Part 1))	-	50	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Spots, blisters and pinholes -IS 2556 (Part 1))	-	50	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Bubbles and specks -IS 2556 (Part 1))	-	50	NA
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing mark -IS 2556 (Part 1))	-	50	NA
3(General requirements-Thickness IS 2556 (Part 1))	-	100	NA
3(General requirements-PERFORMANCE REQUIllEMENTS-WARPAGE IS 2556 (Part 1))	-	100	NA
3(General requirements-PERFORMANCE REQUIllEMENTS-CRAZING IS 2556 (Part 1))	-	1200	NA
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Individual IS 2556 (Part 1))	-	1500	NA
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Average (IS 2556 (Part 1))	-	1500	NA
4(DIMENSIONS-STOP END CHANNEL WITH OUTLET-Type A )	-	1500	NA
4(DIMENSIONS-STOP END CHANNEL WITH OUTLET-Type B )	-	1500	NA
4(DIMENSIONS-PLAIN CHENNEL-Type A )	-	1500	NA
4(DIMENSIONS-PLAIN CHENNEL-Type B )	-	1500	NA
4(DIMENSIONS-PLAIN CHANNEL WITH SOCKET-Type A )	-	1500	NA
4(DIMENSIONS-PLAIN CHANNEL WITH SOCKET-Type B )	-	1500	NA
4(DIMENSIONS-FOOT REST )	-	1500	NA
4(DIMENSIONS-Traps for Long Pattern and Orilsa Pattern Pans )	-	1500	NA
4(DIMENSIONS-- Ovality permissible within the variation allowed for the dimensioN )	-	1500	NA
4(DIMENSIONS-- FLOOR TRAP)	-	1500	NA
4(DIMENSIONS-TYPICAL ILLUSTRATION OF VITRIOUS SHOWER ROSH)	-	1500	NA
5(CONSTRUCTION)	-	100	NA
6(FINISH)	-	100	NA
7.1(Performance Test)	-	2000	NA
7.2(FLUSHING TESTS-Toilet Paper Test-IS 2556(P-3))	-	400	NA
7.2(FLUSHING TESTS-Smudge Test-IS 2556(P-3))	-	400	NA
7.2(FLUSHING TESTS-Water Holding Capacity -Test-IS 2556(P-3))	-	600	NA
7.2(FLUSHING TESTS-Saw Dust Test-IS 2556(P-3))	-	400	NA
7.2(FLUSHING TESTS-Splash Test-IS 2556(P-3))	-	400	NA

Complete

07 Feb, 2027

-
-

IS 2556 : Part 3 (2004)

Vitreous Sanitary Appliances (Vitreous China) - - Part 3: Specific Requirements of Squatting Pans

Long/Orissa/Rural/ Any other Pattern declared

3750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3 and Clause 5.2 of IS 2556(Part 1)(Lead solubility test)	-	800	None
Clause 3 and Clause 9.5 of IS 2556(Part 1)(Chemical Resistance Test)	-	1500	None
Clause 3 and Clause 9.6 of IS 2556(Part 1)(Resistance to staining and burning)	-	1000	None
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Wavy finiah-IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Warpage -IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Discoloration-IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-·Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Spots. blisters and pinholes-IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Bubbles and specks-IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing Marks-IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Spots, blisters and pinholes -IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Bubbles and specks -IS 2556 (Part 1))	-	200	None
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing mark -IS 2556 (Part 1))	-	200	None
3(General requirements-Thickness IS 2556 (Part 1))	-	100	None
3(General requirements-PERFORMANCE REQUIllEMENTS-WARPAGE IS 2556 (Part 1))	-	100	None
3(General requirements-PERFORMANCE REQUIllEMENTS-CRAZING IS 2556 (Part 1))	-	1200	None
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Individual IS 2556 (Part 1))	-	1500	None
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Average (IS 2556 (Part 1))	-	1500	None
3(General requirements-PERFORMANCE REQUIllEMENTS-MODULUS OF RUPTURE IS 2556 (Part 1))	-	600	None
4(PATTERNS )	-	50	None
4(SIZE)	-	100	None
5.1(CONSTRUCTION)	-	50	None
6-Table 1(DIMENSIONS AND TOLERANCES-A)	-	200	None
6.1-Table 1(DIMENSIONS AND TOLERANCES-B)	-	200	None
6.1-Table 2(DIMENSIONS AND TOLERANCES-F)	-	200	None
6.1-Table 3(DIMENSIONS AND TOLERANCES-H)	-	200	None
6.1-Table 4(DIMENSIONS AND TOLERANCES-J)	-	200	None
6.1-Table 5(DIMENSIONS AND TOLERANCES-Slope of bottom of pan)	-	200	None
6.1-Table 6(DIMENSIONS AND TOLERANCES-L)	-	200	None
6.1-Table 7(DIMENSIONS AND TOLERANCES-N)	-	200	None
6.1-Table 8(DIMENSIONS AND TOLERANCES-P)	-	200	None
6.2-Table 2(DIMENSIONS AND TOLERANCES-C)	-	200	None
6.2-Table 3(DIMENSIONS AND TOLERANCES-D)	-	200	None
6.2-Table 4(DIMENSIONS AND TOLERANCES-E)	-	200	None
6.2-Table 5(DIMENSIONS AND TOLERANCES-G)	-	200	None
6.2-Table 6(DIMENSIONS AND TOLERANCES-K)	-	200	None
6.2-Table 7(DIMENSIONS AND TOLERANCES-M)	-	200	None
6.2(DIMENSIONS AND TOLERANCES-top surface variation)	-	200	None
7(FINLSH)	-	200	None
8.1(FLUSHING TESTS-Toilet Paper Test)	-	400	None
8.2(FLUSHING TESTS-Smudge Test)	-	400	None
8.3(FLUSHING TESTS-Water Holding Capacity Test)	-	600	None
8.4(FLUSHING TESTS-Saw Dust Test)	-	400	None
8.5(FLUSHING TESTS-Splash Test)	-	400	None

Complete

07 Feb, 2027

-
-

IS 4457 (2007)

Ceramic unglazed vitreous acid resisting tiles - Specification (Second Revision)

Thickness 5.0 mm to 20 mm

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5, Table 1 - iv -a (Resistance to Chemicals - Annex F)	-	2500	NA
Cl. 5, Table 1 - iv -b (Resistance to conc. HNO3 and conc. H2SO4 - Annex G)	-	2000	NA
3(MANUFACTURE)	-	500	NA
4(MANUFACTURE)	-	500	NA
5(MANUFACTURE)	-	500	NA
4.1(DIMENSIONS AND TOLERANCES- Size)	-	1000	NA
4.2(DIMENSIONS AND TOLERANCES- Thickness)	-	1000	NA
5-Table 1(i)-a(REQUIREMENTS-Dimensions and Surface Quality-Length)	-	1000	NA
5-Table 1(i)-a(REQUIREMENTS-Dimensions and Surface Quality-Width)	-	1000	NA
5-Table 1(i)-b(REQUIREMENTS-Dimensions and Surface Quality-Thickness)	-	1000	NA
5-Table 1(i)-c(REQUIREMENTS-Dimensions and Surface Quality-Straightness of sided)	-	1500	NA
5-Table 1(i)-d(REQUIREMENTS-Dimensions and Surface Quality-Rectangularity)	-	1500	NA
5-Table 1(i)-e(REQUIREMENTS-Dimensions and Surface Quality-Surface flatness-Centre curvature)	-	2000	NA
5-Table 1(i)-e(REQUIREMENTS-Dimensions and Surface Quality-Surface flatness-Edge curvature)	-	2000	NA
5-Table 1(i)-e(REQUIREMENTS-Dimensions and Surface Quality-Surface flatness-Warpage)	-	2000	NA
5-Table 1(ii)(REQUIREMENTS-Surface Quality)	-	200	NA
5-Table 1(iii)(REQUIREMENTS-Physical Properties-Water absorption by weigh(Average))	-	1500	NA
5-Table 1(iii)-a(REQUIREMENTS-Physical Properties-Water absorption by weigh(Indivisual))	-	1500	NA
5-Table 1(iii)-b-1(REQUIREMENTS-Physical Properties-Breaking strengrh(Thickness>=7.5mm))	-	700	NA
5-Table 1(iii)b-2(REQUIREMENTS-Physical Properties-Breaking strengrh(Thickness <7.5mm))	-	700	NA
5-Table 1(iii)-c(REQUIREMENTS-Physical Properties-Modulus of rupture(Average))	-	700	NA
5-Table 1(iii)-c(REQUIREMENTS-Physical Properties-Modulus of rupture(Individual))	-	700	NA
5-Table 1(iii)-d(REQUIREMENTS-Physical Properties-Abrusion resistance)	-	2000	NA

Complete

07 Feb, 2027

-
-

IS 15622 (2017)

Pressed Ceramic Tiles - Specification (First Revision)

Glazed and Unglazed, Floor and Wall

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5& 5.1, Table 1(Coordinating size- IS 13630(pt-1))	-	200	NA
5& 5.1, Table 1(Work size- IS 13630(pt-1))	-	200	NA
5& 5.1, Table 1(Thickness- IS 13630(pt-1))	-	200	NA
5& 5.1, Table 2(Nominal size -IS 13630(pt-1))	-	200	NA
5& 5.1, Table 2(Work size-IS 13630(pt-1))	-	200	NA
5& 5.1, Table 2(Thickness- IS 13630(pt-1))	-	200	NA
5& 5.1, Table 3(Coordinating size- IS 13630(pt-1))	-	200	NA
5& 5.1, Table 3(Work size-IS 13630(pt-1))	-	200	NA
5& 5.1, Table 3(Thickness- IS 13630(pt-1))	-	200	NA
5& 5.1, Table 4(Nominal size-IS 13630(pt-1))	-	200	NA
5& 5.1, Table 4(Work size-IS 13630(pt-1))	-	200	NA
5& 5.1, Table 4(Thickness- IS 13630(pt-1))	-	200	NA
6 table 5, i a (Length-IS 13630(pt-1))	-	1000	NA
6 table 5,i a (width-IS 13630(pt-1))	-	1000	NA
6 table 5, i b (Thickness- IS 13630(pt-1))	-	1000	NA
6 table 5, i c(Straigthness of side-IS 13630(pt-1))	-	1500	NA
6 table 5, i d(Rectangularity-IS 13630(pt-1))	-	1500	NA
6 table 5, i e(Surface flatness-IS 13630(pt-1))	-	2000	NA
6 table 5, i f(Surface quality-IS 13630(pt-1))	-	200	NA
6 table 5, ii a(Water Absorption-IS 13630(pt-2))	-	1500	NA
6 table 5, ii b(Module of rupture -IS 13630(pt-6))	-	700	NA
6 table 5, ii c(Bending Strength-IS 13630(pt-6))	-	700	NA
6 table 5, ii d(Moisture Expension-IS 13630(pt-3))	-	1500	NA
6 table 5, ii e(Scratch hardness of surface -IS 13630(pt-13))	-	500	NA
6 table 5, ii f(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS 13630(pt-4) )	-	2000	NA
6 table 5, ii g(Thermal shock resistance IS 13630(pt-5))	-	2000	NA
6 table 5, ii h(Impact resistance-IS 13630(pt-14))	-	1000	NA
6 table 5, ii j(Co-efficient of friction-tiles intended for used on floor )	-	500	NA
6 table 5, ii k(Crazing resistance-IS 13630(pt-9))	-	2500	NA
6 table 5, ii m(resistance to surface abrasion of glazed Tilles)	-	2000	NA
6 table 5, iii a(Resistance to staining of glazed Tilles-IS 13630(pt-8))	-	300	NA
6 table 5, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound-IS 13630(pt-8))	-	500	NA
6 table 5, iii c(Resistance to acid and alkalis (with the exception ofhydrofluoric acid and its compounds – Glazed tiles-IS 13630(pt-8))	-	500	NA
6 table 6, i a (Length-IS 13630(pt-1))	-	1000	NA
6 table 6, i a (width-IS 13630(pt-1))	-	1000	NA
6 table 6, i b (Thickness-IS 13630(pt-1))	-	1000	NA
6 table 6, i c(Straigthness of side-IS 13630(pt-1))	-	1500	NA
6 table 6, i d(Rectangularity-IS 13630(pt-1))	-	1500	NA
6 table 6, i e(Surface flatness-IS 13630(pt-1))	-	2000	NA
6 table 6, i f(Surface quality-IS 13630(pt-1))	-	200	NA
6 table 6, ii a(Water Absorption-IS 13630(pt-2) )	-	1500	NA
6 table 6, ii b(Module of rupture -IS 13630(pt-6))	-	700	NA
6 table 6, ii c(Bending Strength-IS 13630(pt-6))	-	700	NA
6 table 6, ii d(Moisture Expension-IS 13630(pt-3))	-	1500	NA
6 table 6, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	NA
5 table 6, ii f(Resistance to surface abrasion of glazed Tilles)	-	2000	NA
6 table 6, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS13630(pt-4) )	-	2000	NA
6 table 6, ii h(Thermal shock resistance-IS13630(pt-5) )	-	2000	NA
6 table 6, ii j(Crazing resistance-IS 13630(pt-9))	-	2500	NA
6 table 6, ii k(Impact resistance-IS 13630(pt-14))	-	1000	NA
6 table 6, ii m(Co-efficient of friction-tiles intended for used on floor )	-	500	NA
6 table 6, ii n(Forst resistance-IS 13630(pt-10))	-	4000	NA
6 table 6, ii p(Resistance to deep abrasion of unglazed tiles)	-	2000	NA
6 table 6, iii a(Resistance to staining of glazed Tilles)	-	300	NA
6 table 6, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	500	NA
6 table 6, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	500	NA
6 table 7, i a (Length-IS 13630(pt-1))	-	1000	NA
6 table 7, i a (width-IS 13630(pt-1))	-	1000	NA
6 table 7, i b (Thickness-IS 13630(pt-1))	-	1000	NA
6 table 7, i c(Straigthness of side-IS 13630(pt-1))	-	1500	NA
6 table 7, i d(Rectangularity-IS 13630(pt-1))	-	1500	NA
6 table 7, i e(Surface flatness-IS 13630(pt-1))	-	2000	NA
6 table 7, i f(Surface quality-IS 13630(pt-1))	-	200	NA
6 table 7, ii a(Water Absorption-IS 13630(pt-2) )	-	1500	NA
6 table 7, ii b(Module of rupture-IS 13630(pt-6) )	-	700	NA
6 table 7, ii c(Bending Strength-IS 13630(pt-6))	-	700	NA
6 table 7, ii d(Moisture Expension-IS 13630(pt-3))	-	1500	NA
6 table 7, ii e(Scratch hardness of surface-IS 13630(pt-13))	-	300	NA
6 table 7, ii f(Resistance to surface abrasion of glazed Tilles)	-	2000	NA
6 table 7, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS13630(pt-4) )	-	2000	NA
6 table 7, ii h(Thermal shock resistance-IS13630(pt-5) )	-	2000	NA
6 table 7, ii j(Crazing resistance-IS 13630(pt-9))	-	2500	NA
6 table 7, ii k(Impact resistance-IS 13630(pt-14))	-	1000	NA
6 table 7, ii m(Co-efficient of friction-tiles intended for used on floor )	-	500	NA
6 table 7, ii n(Forst resistance-IS 13630(pt-10))	-	4000	NA
6 table 7, ii p(Resistance to deep abrasion of unglazed tiles)	-	2000	NA
6 table 7, iii a(Resistance to staining of glazed Tilles)	-	300	NA
6 table 7, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	500	NA
6 table 7, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	500	NA
6 table 8, i a (Length-IS 13630(pt-1))	-	1000	NA
6 table 8, i a (width-IS 13630(pt-1))	-	1000	NA
6 table 8, i b (Thickness-IS 13630(pt-1))	-	1000	NA
6 table 8, i c(Straigthness of side-IS 13630(pt-1))	-	1500	NA
6 table 8, i d(Rectangularity-IS 13630(pt-1))	-	1500	NA
6 table 8, i e(Surface flatness-IS 13630(pt-1))	-	2000	NA
6 table 8, i f(Surface quality-IS 13630(pt-1))	-	200	NA
6 table 8, ii a(Water Absorption-IS 13630(pt-6) )	-	1500	NA
6 table 8, ii b(Module of rupture-IS 13630(pt-6) )	-	700	NA
6 table 8, ii c(Bending Strength-IS 13630(pt-6))	-	700	NA
6 table 8, ii d(Moisture Expension-IS 13630(pt-3))	-	1500	NA
6 table 8, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	300	NA
6 table 8, ii f(Resistance to surface abrasion of glazed Tilles)	-	2000	NA
6 table 8, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS 13630(pt-4) )	-	2000	NA
6 table 8, ii h(Thermal shock resistance-IS 13630(pt-5) )	-	2000	NA
6 table 8, ii j(Crazing resistance-IS 13630(pt-9))	-	2500	NA
6 table 8, ii k(Impact resistance-IS 13630(pt-14))	-	1000	NA
6 table 8, ii m(Co-efficient of friction-tiles intended for used on floor )	-	500	NA
6 table 8, ii n(Forst resistance-IS 13630(pt-10))	-	4000	NA
6 table 8, ii p(Resistance to deep abrasion of unglazed tiles)	-	2000	NA
6 table 8, ii q(Bulk Density-IS13630(pt-2))	-	1500	NA
6 table 8, iii a(Resistance to staining of glazed Tilles)	-	300	NA
6 table 8 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	500	NA
6 table 8, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	500	NA
6 table 9, i a (Length-IS 13630(pt-1))	-	1000	NA
6 table 9, i a (width-IS 13630(pt-1))	-	1000	NA
6 table 9, i b (Thickness-IS 13630(pt-1))	-	1000	NA
6 table 9, i c(Straigthness of side-IS 13630(pt-1))	-	1500	NA
6 table 9, i d(Rectangularity-IS 13630(pt-1))	-	1500	NA
6 table 9, i e(Surface flatness-IS 13630(pt-1))	-	2000	NA
6 table 9, i f(Surface quality-IS 13630(pt-1))	-	200	NA
6 table 9, ii a(Water Absorption-IS 13630(pt-6) )	-	1500	NA
6 table 9, ii q(Bulk Density-)	-	1500	NA
6 table 9, ii b(Module of rupture-IS 13630(pt-6) )	-	700	NA
6 table 9, ii c(Bending Strength-IS 13630(pt-6))	-	700	NA
6 table 9, ii d(Moisture Expension-IS 13630(pt-3))	-	1500	NA
6 table 9, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	300	NA
6 table 9, ii f(Resistance to surface abrasion of glazed Tilles)	-	2000	NA
6 table 9, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C )	-	2000	NA
6 table 9, ii h(Thermal shock resistance-IS 13630(pt-5))	-	2000	NA
6 table 9, ii j(Crazing resistance-IS 13630(pt-9))	-	2500	NA
6 table 9, ii k(Impact resistance-IS 13630(pt-14))	-	1000	NA
6 table 8, ii m(Co-efficient of friction-tiles intended for used on floor )	-	500	NA
6 table 9, ii n(Forst resistance-IS 13630(pt-10))	-	4000	NA
6 table 9, ii p(Resistance to deep abrasion of unglazed tiles)	-	2000	NA
6 table 9, iii a(Resistance to staining )	-	500	NA
6 table 9 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1500	NA
6 table 9, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	2000	NA

Complete

07 Feb, 2027

-
-

IS 2556 : Part 6 (2021)

Vitreous China sanitary appliances - Specification: Part 6 Specific requirements of urinal and partition plates (fifth revision)

Any Patterns and Sizes

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(GENERAL REQUIREMENTS)	-	2500	-
Cl 5(PATTERNS AND SIZES)	-	200	-
Cl 6.1(DIMENSIONS AND TOLERANCES)	-	2000	-
Cl 6.2(DIMENSIONS AND TOLERANCES)	-	2000	-
Cl 6.3(DIMENSIONS AND TOLERANCES)	-	2000	-
Cl 7(CONSTRUCTION)	-	200	-
Cl 7.1(Wall-hung urinal (flat back) with flushing rim (see Fig. 1) and wall-hung urinal (angle back) with flushing rim (see Fig. 3) shall have an integral flushing box rim with minimum 12 holes, well distributed in the rim to ensure satisfactory flushing. It shall have an integral outlet and overflow.)	-	200	-
Cl 7.1.2()	-	200	-
Cl 7.2()	-	200	-
Cl 7.3()	-	200	-
Cl 7.4()	-	200	-
Cl 7.5()	-	200	-
Cl 7.6()	-	200	-
Cl 7.7()	-	200	-
Cl 7.8()	-	200	-
Cl 8()	-	200	-
Cl 4(GENERAL REQUIREMENTS)	-	2500	-
Cl 5(PATTERNS AND SIZES)	-	200	-
Cl 6.1(DIMENSIONS AND TOLERANCES)	-	2000	-
Cl 6.2(DIMENSIONS AND TOLERANCES)	-	2000	-
Cl 6.3(DIMENSIONS AND TOLERANCES)	-	2000	-
Cl 7(CONSTRUCTION)	-	200	-
Cl 7.1(Wall-hung urinal (flat back) with flushing rim (see Fig. 1) and wall-hung urinal (angle back) with flushing rim (see Fig. 3) shall have an integral flushing box rim with minimum 12 holes, well distributed in the rim to ensure satisfactory flushing. It shall have an integral outlet and overflow.)	-	200	-
Cl 7.1.2()	-	200	-
Cl 7.2()	-	200	-
Cl 7.3()	-	200	-
Cl 7.4()	-	200	-
Cl 7.5()	-	200	-
Cl 7.6()	-	200	-
Cl 7.7()	-	200	-
Cl 7.8()	-	200	-
Cl 8()	-	200	-
Clause 4 and Clause 9.3 of IS 2556 (Part 1)(Water absorption)	-	1500	-
Clause 4 and Clause 5.2 of IS 2556 (Part 1)(Lead solubility test)	-	800	-
Clause 4 and Clause 7 of IS 2556 (Part 1)(Minimum thickness)	-	100	-
Clause 4and Clause 9.1 of IS 2556 (Part 1)(Warpage)	-	100	-
Clause 4and Clause 9.2 of IS 2556 (Part 1)(Crazing)	-	1200	-
Clause 4 and Clause 9.4 of IS 2556 (Part 1)(Modulus of Rupture)	-	1500	-
Clause 4 and Clause 9.5 of IS 2556 (Part 1)(Chemical resistance)	-	1500	-
Clause 4 and Clause 9.6 of IS 2556 (Part 1)(Resistance to staining and burning)	-	1000	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General-Wavy finish)	-	200	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General-Warpage)	-	100	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Other appliances)	-	200	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Accessories)	-	200	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Bit)	-	200	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Discoloration)	-	200	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Flushing surface and horizontal face of rims of WC pans, squatting pans, bidets and urinals- Spots, blisters and pinholes")	-	200	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Flushing surface and horizontal face of rims of WC pans, squatting pans, bidets and urinals-Bubbles and specks")	-	200	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Flushing surface and horizontal face of rims of WC pans, squatting pans, bidets and urinals-Polishing marks")	-	200	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Visible surfaces other than above-Spots, blisters and pinholes ")	-	200	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Visible surfaces other than above-Bubbles and specks")	-	200	-
Clause 4 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Visible surfaces other than above-Polishing marks")	-	200	-
Clause 4 and Clause 5 of of IS 2556 (Part 1)(Application of glazing)	-	200	-
Clause 4 and Clause 6.4 of IS 2556 (Part 1)(Illumination during visual observation)	-	200	-

Complete

07 Feb, 2027

-
Included w.e.f. 10.04.2024

IS 15477 (2019)

Adhesives for use with ceramic tiles and mosaics

Type 1, Type 2, Type 3, Type 4, Type 5 adhesives

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	200	-
5.1(Tensile Adhesion Strength )	-	3500	-
5.1(Tensile Adhesion Strength)	-	3500	-
5.2(Shear Adhesion Strength )	-	3500	-
5.2(Shear Adhesion Strength)	-	3500	-
5.2(Shear Adhesion Strength)	-	3500	-
5.3(OpenTime)	-	1500	-
5.4(Adjustment Time)	-	1500	-
5.5(Slip (Required for Vertical Application Only))	-	1500	-
5.6(Deformability (Required for VerticalApplication Only))	-	3500	-
8.2(Marking)	-	200	-

Complete

07 Feb, 2027

-
Included w.e.f. 10.04.2024

IS 2556 : Part 16 (2002)

Vitreous sanitary appliances (Vitreous China) - Specification: Part 16 specific requirements of wash down wall mounted water closets

Pattern 1 , Pattern 2 and any other patterns and sizes

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"3 IS 2556(P1)"(GENERAL REQUIREMENTS)	-	2500	-
4(PATTERNS)	-	200	-
"5 Table 1 & 2 "(DIMENSIONS AND TOLERANCES)	-	200	-
"5 Table 1 & 2 "(A)	-	200	-
"5 Table 1 & 2 "(H)	-	200	-
"5 Table 1 & 2 "(J)	-	200	-
"5 Table 1 & 2 "(K)	-	200	-
"5 Table 1 & 2 "(L)	-	200	-
"5 Table 1 & 2 "(O)	-	200	-
"5 Table 1 & 2 "(PATTERNS)	-	200	-
"5 Table 1 & 2 "(Q)	-	200	-
"5 Table 1 & 2 "(S)	-	200	-
"5 Table 1 & 2 "(T)	-	200	-
"5 Table 1 & 2 "(W1)	-	200	-
"5 Table 1 & 2 "(W2)	-	200	-
"5 Table 1 & 2 "(E)	-	200	-
"5 Table 1 & 2 "(F)	-	200	-
"5 Table 1 & 2 "(D)	-	200	-
"5 Table 1 & 2 "(D1)	-	200	-
"5 Table 1 & 2 "(D2/2)	-	200	-
"5 Table 1 & 2 "(f3)	-	200	-
"5 Table 1 & 2 "(f2)	-	200	-
"5 Table 1 & 2 "(R)	-	200	-
"5 Table 1 & 2 "(n)	-	200	-
"5 Table 1 & 2 "(P1)	-	200	-
"5 Table 1 & 2 "(P2)	-	200	-
"5 Table 1 & 2 "(P3)	-	200	-
"5 Table 1 & 2 "(D3)	-	200	-
"5 Table 1 & 2 "(V)	-	200	-
"5 Table 1 & 2 "(M)	-	200	-
"5 Table 1 & 2 "(X)	-	200	-
"5 Table 1 & 2 "(N)	-	200	-
6.1(CONSTRUCTION)	-	200	-
6.2(CONSTRUCTION)	-	200	-
6.3(CONSTRUCTION)	-	200	-
7(FINISH)	-	200	-
8.1()	-	200	-
8.2(Smudge Test)	-	200	-
8.3(Holding Capacity Test)	-	200	-
8.4(Single Ball Test)	-	200	-
9(LOAD TEST)	-	1000	-
"3 IS 2556(P1)"(GENERAL REQUIREMENTS)	-	2500	-
4(PATTERNS)	-	200	-
"5 Table 1 & 2 "(DIMENSIONS AND TOLERANCES)	-	200	-
"5 Table 1 & 2 "(A)	-	200	-
"5 Table 1 & 2 "(H)	-	200	-
"5 Table 1 & 2 "(J)	-	200	-
"5 Table 1 & 2 "(K)	-	200	-
"5 Table 1 & 2 "(L)	-	200	-
"5 Table 1 & 2 "(O)	-	200	-
"5 Table 1 & 2 "(PATTERNS)	-	200	-
"5 Table 1 & 2 "(Q)	-	200	-
"5 Table 1 & 2 "(S)	-	200	-
"5 Table 1 & 2 "(T)	-	200	-
"5 Table 1 & 2 "(W1)	-	200	-
"5 Table 1 & 2 "(W2)	-	200	-
"5 Table 1 & 2 "(E)	-	200	-
"5 Table 1 & 2 "(F)	-	200	-
"5 Table 1 & 2 "(D)	-	200	-
"5 Table 1 & 2 "(D1)	-	200	-
"5 Table 1 & 2 "(D2/2)	-	200	-
"5 Table 1 & 2 "(f3)	-	200	-
"5 Table 1 & 2 "(f2)	-	200	-
"5 Table 1 & 2 "(R)	-	200	-
"5 Table 1 & 2 "(n)	-	200	-
"5 Table 1 & 2 "(P1)	-	200	-
"5 Table 1 & 2 "(P2)	-	200	-
"5 Table 1 & 2 "(P3)	-	200	-
"5 Table 1 & 2 "(D3)	-	200	-
"5 Table 1 & 2 "(V)	-	200	-
"5 Table 1 & 2 "(M)	-	200	-
"5 Table 1 & 2 "(X)	-	200	-
"5 Table 1 & 2 "(N)	-	200	-
6.1(CONSTRUCTION)	-	200	-
6.2(CONSTRUCTION)	-	200	-
6.3(CONSTRUCTION)	-	200	-
7(FINISH)	-	200	-
8.1()	-	200	-
8.2(Smudge Test)	-	200	-
8.3(Holding Capacity Test)	-	200	-
8.4(Single Ball Test)	-	200	-
9(LOAD TEST)	-	1000	-
" Cl-5 Table-1 (vii)"(Width of opening, Min)	-	200	-
Clause 3 and Clause 9.3 of IS 2556 (Part 1)(Water absorption)	-	1500	-
Clause 3 and Clause 5.2 of IS 2556 (Part 1)(Lead solubility test)	-	800	-
Clause 3 and Clause 7 of IS 2556 (Part 1)(Minimum thickness)	-	100	-
Clause 3 and Clause 9.1 of IS 2556 (Part 1)(Warpage)	-	100	-
Clause 3 and Clause 9.2 of IS 2556 (Part 1)(Crazing)	-	1200	-
Clause 3 and Clause 9.4 of IS 2556 (Part 1)(Modulus of Rupture)	-	1500	-
Clause 3 and Clause 9.5 of IS 2556 (Part 1)(Chemical resistance)	-	1500	-
Clause 3 and Clause 9.6 of IS 2556 (Part 1)(Resistance to staining and burning)	-	1000	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General-Wavy finish)	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General-Warpage)	-	100	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Other appliances)	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Accessories)	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Bit)	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Discoloration)	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Flushing surface and horizontal face of rims of WC pans, squatting pans, bidets and urinals- Spots, blisters and pinholes")	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Flushing surface and horizontal face of rims of WC pans, squatting pans, bidets and urinals-Bubbles and specks")	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Flushing surface and horizontal face of rims of WC pans, squatting pans, bidets and urinals-Polishing marks")	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Visible surfaces other than above-Spots, blisters and pinholes ")	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Visible surfaces other than above-Bubbles and specks")	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Visible surfaces other than above-Polishing marks")	-	200	-
Clause 3 and Clause 5 of of IS 2556 (Part 1)(Application of glazing)	-	200	-
Clause 3 and Clause 6.4 of IS 2556 (Part 1)(Illumination during visual observation)	-	200	-

Complete

07 Feb, 2027

-
Included w.e.f. 10.04.2024

IS 2556 : Part 15 (2004)

Vitreous sanitary appliances (Vitreous China) - Specification: Part 15 specific requirements of universal water closets

Size 1, Size 2 and any other sizes

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3 - General Requirements ( Ref. Cl.5.2 of IS 2556 (Part 1) : 1994)(Lead or a lead compound, Annex - A of IS 2556 (Part 1) : 1994))	-	800	-
Cl. 3 - General Requirements ( Ref. Cl.9.5 of IS 2556 (Part 1) : 1994)(Chemical Resistance, Annex - B of IS 2556 (Part 1) : 1994))	-	1500	-
Cl. 3 - General Requirements ( Ref. Cl.9.6 of IS 2556 (Part 1) : 1994)(Resistance to staining and burning, Annex - C of IS 2556 (Part 1) : 1994))	-	1000	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Wavy finiah-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Warpage -IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Discoloration-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-·Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Spots. blisters and pinholes-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Bubbles and specks-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing Marks-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Spots, blisters and pinholes -IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Bubbles and specks -IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing mark -IS 2556 (Part 1))	-	200	-
3(General requirements-Thickness IS 2556 (Part 1))	-	100	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WARPAGE IS 2556 (Part 1))	-	100	-
3(General requirements-PERFORMANCE REQUIllEMENTS-CRAZING IS 2556 (Part 1))	-	1200	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Individual IS 2556 (Part 1))	-	1500	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Average (IS 2556 (Part 1))	-	1500	-
4(SIZES)	-	200	-
5.1-table 1(DIMENSIONS AND TOLERANCES-L)	-	200	-
5.1-table 1(DIMENSIONS AND TOLERANCES-W)	-	200	-
5.1-table 1(DIMENSIONS AND TOLERANCES-H)	-	200	-
5.1-table 1(DIMENSIONS AND TOLERANCES-W1)	-	200	-
5.1-table 1(DIMENSIONS AND TOLERANCES-L2)	-	200	-
5.1-table 1(DIMENSIONS AND TOLERANCES-L1)	-	200	-
5.1-table 1(DIMENSIONS AND TOLERANCES-L3)	-	200	-
5.1-table 1(DIMENSIONS AND TOLERANCES-T)	-	200	-
5.1-table 1(DIMENSIONS AND TOLERANCES-D)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-h1)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-h2)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-h3)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-d1)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-d2)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-d3)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-A)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-B)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-d4)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-d5/2)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-n)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-M)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-θ1)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-θ2)	-	200	-
6.1(CONSTRUCTION-closet)	-	200	-
6.1(CONSTRUCTION-closet)	-	200	-
6.1(CONSTRUCTION)	-	200	-
6.3-Table 3(CONSTRUCTION-Dimensions of Two Piece Bend-d1)	-	200	-
6.3-Table 3(CONSTRUCTION-Dimensions of Two Piece Bend-d2)	-	200	-
6.3-Table 3(CONSTRUCTION-Dimensions of Two Piece Bend-d6)	-	200	-
6.3-Table 3(CONSTRUCTION-Dimensions of Two Piece Bend-f)	-	200	-
6.3-Table 3(CONSTRUCTION-Dimensions of Two Piece Bend-h)	-	200	-
7(FINISH)	-	200	-
7(FINISH)	-	200	-
8.2(FLUSHING TESTS-Toilet Paper)	-	200	-
8.3(FLUSHING TESTS-Smudge Test)	-	200	-
8.4(FLUSHING TESTS-Water Holding Capacity )	-	200	-
8.5.1(FLUSHING TESTS-Single Ball Test)	-	200	-
8.5.2(FLUSHING TESTS-Fifty Ball Test)	-	200	-
8.6(FLUSHING TESTS-Saw Dust Test)	-	200	-
8.7(FLUSHING TESTS-Splash Test )	-	200	-
9(Load Bearing Test)	-	1000	-
Cl. 3 - General Requirements ( Ref. Cl.5.2 of IS 2556 (Part 1) : 1994)(Lead or a lead compound, Annex - A of IS 2556 (Part 1) : 1994))	-	800	-
Cl. 3 - General Requirements ( Ref. Cl.9.5 of IS 2556 (Part 1) : 1994)(Chemical Resistance, Annex - B of IS 2556 (Part 1) : 1994))	-	1500	-
Cl. 3 - General Requirements ( Ref. Cl.9.6 of IS 2556 (Part 1) : 1994)(Resistance to staining and burning, Annex - C of IS 2556 (Part 1) : 1994))	-	1000	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Wavy finiah-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Warpage -IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Discoloration-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-·Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Spots. blisters and pinholes-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Bubbles and specks-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing Marks-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Spots, blisters and pinholes -IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Bubbles and specks -IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing mark -IS 2556 (Part 1))	-	200	-
3(General requirements-Thickness IS 2556 (Part 1))	-	100	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WARPAGE IS 2556 (Part 1))	-	100	-
3(General requirements-PERFORMANCE REQUIllEMENTS-CRAZING IS 2556 (Part 1))	-	1200	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Individual IS 2556 (Part 1))	-	1500	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Average (IS 2556 (Part 1))	-	1500	-
4(SIZES)	-	200	-
5.1-table 1(DIMENSIONS AND TOLERANCES-L)	-	200	-
5.1-table 1(DIMENSIONS AND TOLERANCES-W)	-	200	-
5.1-table 1(DIMENSIONS AND TOLERANCES-H)	-	200	-
5.1-table 1(DIMENSIONS AND TOLERANCES-W1)	-	200	-
5.1-table 1(DIMENSIONS AND TOLERANCES-L2)	-	200	-
5.1-table 1(DIMENSIONS AND TOLERANCES-L1)	-	200	-
5.1-table 1(DIMENSIONS AND TOLERANCES-L3)	-	200	-
5.1-table 1(DIMENSIONS AND TOLERANCES-T)	-	200	-
5.1-table 1(DIMENSIONS AND TOLERANCES-D)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-h1)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-h2)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-h3)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-d1)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-d2)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-d3)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-A)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-B)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-d4)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-d5/2)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-n)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-M)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-θ1)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Connecting Dimensions-θ2)	-	200	-
6.1(CONSTRUCTION-closet)	-	200	-
6.1(CONSTRUCTION-closet)	-	200	-
6.1(CONSTRUCTION)	-	200	-
6.3-Table 3(CONSTRUCTION-Dimensions of Two Piece Bend-d1)	-	200	-
6.3-Table 3(CONSTRUCTION-Dimensions of Two Piece Bend-d2)	-	200	-
6.3-Table 3(CONSTRUCTION-Dimensions of Two Piece Bend-d6)	-	200	-
6.3-Table 3(CONSTRUCTION-Dimensions of Two Piece Bend-f)	-	200	-
6.3-Table 3(CONSTRUCTION-Dimensions of Two Piece Bend-h)	-	200	-
7(FINISH)	-	200	-
7(FINISH)	-	200	-
8.2(FLUSHING TESTS-Toilet Paper)	-	200	-
8.3(FLUSHING TESTS-Smudge Test)	-	200	-
8.4(FLUSHING TESTS-Water Holding Capacity )	-	200	-
8.5.1(FLUSHING TESTS-Single Ball Test)	-	200	-
8.5.2(FLUSHING TESTS-Fifty Ball Test)	-	200	-
8.6(FLUSHING TESTS-Saw Dust Test)	-	200	-
8.7(FLUSHING TESTS-Splash Test )	-	200	-
9(Load Bearing Test)	-	1000	-
Clause 3 and Clause 9.4 of IS 2556 (Part 1) 2021(Modulus of Rupture)	-	1500	-
Clause 3 and Clause 6.4 of IS 2556 Part 1(Illumination during visual observation)	-	200	-
Clause 3 and Cl-6.1, 9.1 and 10.1 Table 1, i) of IS 2556 Part 1(General-Bit)	-	200	-
Clause 3 and Cl-6.1, 9.1 and 10.1 Table 1, i) of IS 2556 Part 1(General-Accessories)	-	200	-
Clause 3 and Cl-6.1, 9.1 and 10.1 Table 1, i) of IS 2556 Part 1(General-Other appliances)	-	200	-

Complete

07 Feb, 2027

-
Included w.e.f. 10.04.2024

IS 2556 : Part 14 (1995)

Vitreous sanitary appliances (Vitreous China) - specification: Part 14 specific requirements of integrated squatting pans

Long pattern 500 mm and any other patterns and sizes

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no. 3.(Requirements)	-	2500	-
Clause no. 3.(Requirements)	-	2500	-
Clause no. 4.(Pattern)	-	200	-
Clause no. 5.1 table no.1 (i)(Length)	-	200	-
Clause no. 5.1 table no.1 (ii)(Over all length)	-	200	-
Clause no. 5.1 table no.1 (iii)(Length of opening)	-	200	-
Clause no. 5.1 table no.1 (iv)(Width of opening)	-	200	-
Clause no. 5.1 table no.1 (v)(Width of opening)	-	200	-
Clause no. 5.1 table no.1 (vi)(Height)	-	200	-
Clause no. 5.1 table no.1 (vii)(Slope of bottom of pan)	-	200	-
Clause no. 5.1 table no.1 (viii)(Depth of water seal)	-	200	-
Clause no.5.1 Table no. 2 (i)(Depth of flush inlet socket)	-	200	-
Clause no.5.1 Table no. 2 (ii)("Distance from end of flush inlet socket to outside of outlet")	-	200	-
Clause no.5.1 Table no. 2 (iii)(Dia of outlet, internal)	-	200	-
Clause no.5.1 Table no. 2 (iv)(Dia of outlet, external)	-	200	-
Clause no.5.1 Table no. 2 (v)("Internal dia of flush inlet socket")	-	200	-
Clause no.5.1 Table no. 2 (vi)("Length of serrated part of outlet")	-	200	-
Clause no.5.1 Table no. 2 (vii)("Distance of the centre of outlet from the bottom of the pan")	-	200	-
Clause no.5.1 Table no. 2 (viii)("Angle of the outlet with the vertical plane passing through its centre ")	-	200	-
Clause no.6.(construction)	-	200	-
Clause no.6. table no. 3(i)(Internal dia of outlet’)	-	200	-
Clause no.6. table no. 3(ii)(External dia of outlet’)	-	200	-
Clause no.6. table no. 3(iii)(Internal dia of inlet socket)	-	200	-
Clause no.6. table no. 3(iv)(Depth of inlet socket)	-	200	-
Clause no.6. table no. 3(v)(Height of the bend)	-	200	-
Clause no.8.1.1(" AlO-litre flushing cistern conforming to shall be fixed")	-	200	-
Clause no.8.2(Tiolet paper test)	-	200	-
Clause no.8.3(Smudge test)	-	200	-
Clause no.8.4(Holding capacity test)	-	200	-
Clause no.8.5(ball test)	-	200	-
Clause no.10(marking)	-	200	-
Clause no. 3.(Requirements)	-	2500	-
Clause no. 3.(Requirements)	-	2500	-
Clause no. 4.(Pattern)	-	200	-
Clause no. 5.1 table no.1 (i)(Length)	-	200	-
Clause no. 5.1 table no.1 (ii)(Over all length)	-	200	-
Clause no. 5.1 table no.1 (iii)(Length of opening)	-	200	-
Clause no. 5.1 table no.1 (iv)(Width of opening)	-	200	-
Clause no. 5.1 table no.1 (v)(Width of opening)	-	200	-
Clause no. 5.1 table no.1 (vi)(Height)	-	200	-
Clause no. 5.1 table no.1 (vii)(Slope of bottom of pan)	-	200	-
Clause no. 5.1 table no.1 (viii)(Depth of water seal)	-	200	-
Clause no.5.1 Table no. 2 (i)(Depth of flush inlet socket)	-	200	-
Clause no.5.1 Table no. 2 (ii)("Distance from end of flush inlet socket to outside of outlet")	-	200	-
Clause no.5.1 Table no. 2 (iii)(Dia of outlet, internal)	-	200	-
Clause no.5.1 Table no. 2 (iv)(Dia of outlet, external)	-	200	-
Clause no.5.1 Table no. 2 (v)("Internal dia of flush inlet socket")	-	200	-
Clause no.5.1 Table no. 2 (vi)("Length of serrated part of outlet")	-	200	-
Clause no.5.1 Table no. 2 (vii)("Distance of the centre of outlet from the bottom of the pan")	-	200	-
Clause no.5.1 Table no. 2 (viii)("Angle of the outlet with the vertical plane passing through its centre ")	-	200	-
Clause no.6.(construction)	-	200	-
Clause no.6. table no. 3(i)(Internal dia of outlet’)	-	200	-
Clause no.6. table no. 3(ii)(External dia of outlet’)	-	200	-
Clause no.6. table no. 3(iii)(Internal dia of inlet socket)	-	200	-
Clause no.6. table no. 3(iv)(Depth of inlet socket)	-	200	-
Clause no.6. table no. 3(v)(Height of the bend)	-	200	-
Clause no.8.1.1(" AlO-litre flushing cistern conforming to shall be fixed")	-	200	-
Clause no.8.2(Tiolet paper test)	-	200	-
Clause no.8.3(Smudge test)	-	200	-
Clause no.8.4(Holding capacity test)	-	200	-
Clause no.8.5(ball test)	-	200	-
Clause no.10(marking)	-	200	-
Cl-7(FINISH)	-	200	-
Clause 3 and Clause 9.3 of IS 2556 (Part 1)(Water absorption)	-	1500	-
Clause 3 and Clause 5.2 of IS 2556 (Part 1)(Lead solubility test)	-	800	-
Clause 3 and Clause 7 of IS 2556 (Part 1)(Minimum thickness)	-	100	-
Clause 3 and Clause 9.1 of IS 2556 (Part 1)(Warpage)	-	100	-
Clause 3 and Clause 9.2 of IS 2556 (Part 1)(Crazing)	-	200	-
Clause 3 and Clause 9.4 of IS 2556 (Part 1)(Modulus of Rupture)	-	1500	-
Clause 3 and Clause 9.5 of IS 2556 (Part 1)(Chemical resistance)	-	1500	-
Clause 3 and Clause 9.6 of IS 2556 (Part 1)(Resistance to staining and burning)	-	1000	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General-Wavy finish)	-	100	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General-Warpage)	-	100	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Other appliances)	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Accessories)	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Bit)	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Discoloration)	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Flushing surface and horizontal face of rims of WC pans, squatting pans, bidets and urinals- Spots, blisters and pinholes")	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Flushing surface and horizontal face of rims of WC pans, squatting pans, bidets and urinals-Bubbles and specks")	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Flushing surface and horizontal face of rims of WC pans, squatting pans, bidets and urinals-Polishing marks")	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Visible surfaces other than above-Spots, blisters and pinholes ")	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Visible surfaces other than above-Bubbles and specks")	-	200	-
Clause 3 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Visible surfaces other than above-Polishing marks")	-	200	-
Clause 3 and Clause 5 of of IS 2556 (Part 1)(Application of glazing)	-	200	-
Clause 3 and Clause 6.4 of IS 2556 (Part 1)(Illumination during visual observation)	-	200	-

Complete

07 Feb, 2027

-
Included w.e.f. 10.04.2024

IS 2556 : Part 8 (2021)

Vitreous China sanitary appliances - Specification: Part 8 Specific requirements of close coupled and one-piece, pedestal washdown and syphonic water closets (sixth revision)

Any Pattern and size

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no. 4(Patterns)	-	200	-
Clause no. 5(General requirements and construction)	-	2500	-
Clause no. 6 Table no.1-6(dimension and tolerance)	-	2500	-
Clause number 7.(Finish)	-	200	-
Clause number 8.("FLUSHING CISTERNS WATER CLOSETS")	-	200	-
Clause number 9.1(Toilet paper test)	-	200	-
Clause number 9.2(Smudge test)	-	200	-
Clause number. 9.3(Holding Capacity Test)	-	200	-
Clause number 9.4.1(Single ball test)	-	200	-
Clause number. 9.4.2(Fifty ball test)	-	200	-
Clause number.9.5(Saw dust test)	-	200	-
Clause number. 9.6(Splash test)	-	200	-
Clause number.10(LOAD BEARING TEST)	-	1000	-
Clause number.12("ADDITIONAL REQUIREMENTS FOR WATER EFFICIENCY")	-	2500	-
Clause number.13(Marking)	-	200	-
Clause no. 4(Patterns)	-	200	-
Clause no. 5(General requirements and construction)	-	2500	-
Clause no. 6 Table no.1-6(dimension and tolerance)	-	2500	-
Clause number 7.(Finish)	-	200	-
Clause number 9.1(Toilet paper test)	-	200	-
Clause number 9.2(Smudge test)	-	200	-
Clause number. 9.3(Holding Capacity Test)	-	200	-
Clause number 9.4.1(Single ball test)	-	200	-
Clause number. 9.4.2(Fifty ball test)	-	200	-
Clause number.9.5(Saw dust test)	-	200	-
Clause number. 9.6(Splash test)	-	200	-
Clause number.10(LOAD BEARING TEST)	-	1000	-
Clause number.12("ADDITIONAL REQUIREMENTS FOR WATER EFFICIENCY")	-	2500	-
Clause number.13(Marking)	-	200	-
Clause number 8.("FLUSHING CISTERNS WATER CLOSETS")	-	200	-
Clause no. 4(Patterns)	-	200	-
Clause no. 5(General requirements and construction)	-	2500	-
Clause no. 6 Table no.1-6(dimension and tolerance)	-	2500	-
Clause number 7.(Finish)	-	200	-
Clause number 9.1(Toilet paper test)	-	200	-
Clause number 9.2(Smudge test)	-	200	-
Clause number. 9.3(Holding Capacity Test)	-	200	-
Clause number 9.4.1(Single ball test)	-	200	-
Clause number. 9.4.2(Fifty ball test)	-	200	-
Clause number.9.5(Saw dust test)	-	200	-
Clause number. 9.6(Splash test)	-	200	-
Clause number.10(LOAD BEARING TEST)	-	1000	-
Clause number.12("ADDITIONAL REQUIREMENTS FOR WATER EFFICIENCY")	-	2500	-
Clause number.13(Marking)	-	200	-
Clause 5 and Clause 9.3 of IS 2556 (Part 1)(Water absorption)	-	750	-
Clause 5 and Clause 5.2 of IS 2556 (Part 1)(Lead solubility test)	-	800	-
Clause 5 and Clause 7 of IS 2556 (Part 1)(Minimum thickness)	-	100	-
Clause 5 and Clause 9.1 of IS 2556 (Part 1)(Warpage)	-	100	-
Clause 5 and Clause 9.2 of IS 2556 (Part 1)(Crazing)	-	1200	-
Clause 5 and Clause 9.4 of IS 2556 (Part 1)(Modulus of Rupture)	-	1500	-
Clause 5 and Clause 9.5 of IS 2556 (Part 1)(Chemical resistance)	-	1500	-
Clause 5 and Clause 9.6 of IS 2556 (Part 1)(Resistance to staining and burning)	-	1000	-
Clause 5 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General-Wavy finish)	-	2500	-
Clause 5 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General-Warpage)	-	250	-
Clause 5 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Other appliances)	-	250	-
Clause 5 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Accessories)	-	250	-
Clause 5 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Bit)	-	250	-
Clause 5 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)(General- Discoloration)	-	250	-
Clause 5 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Flushing surface and horizontal face of rims of WC pans, squatting pans, bidets and urinals- Spots, blisters and pinholes")	-	250	-
Clause 5 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Flushing surface and horizontal face of rims of WC pans, squatting pans, bidets and urinals-Bubbles and specks")	-	250	-
Clause 5 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Flushing surface and horizontal face of rims of WC pans, squatting pans, bidets and urinals-Polishing marks")	-	250	-
Clause 5 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Visible surfaces other than above-Spots, blisters and pinholes ")	-	250	-
Clause 5 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Visible surfaces other than above-Bubbles and specks")	-	250	-
Clause 5 and Clause 6.1, 9.1 and 10.1 Table 1 of IS 2556 (Part 1)("Visible surfaces other than above-Polishing marks")	-	250	-
Clause-5 of IS 2556 Part 8(Construction)	-	250	-
Clause 5 and Clause 5 of of IS 2556 (Part 1)(Application of glazing)	-	250	-
Clause 5 and Clause 6.4 of IS 2556 (Part 1)(Illumination during visual observation)	-	100	-

Complete

07 Feb, 2027

-
Included w.e.f. 10.04.2024

IS 2556 : Part 5 (1994)

Vitreous sanitary appliances (Vitreous China) - Specification: Part 5 specific requirements of laboratory sinks

Any Pattern or size

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3 - General Requirements ( Ref. Cl.5.2 of IS 2556 (Part 1) : 1994)(Lead or a lead compound, Annex - A of IS 2556 (Part 1) : 1994))	-	800	-
Cl. 3 - General Requirements ( Ref. Cl.9.5 of IS 2556 (Part 1) : 1994)(Chemical Resistance, Annex - B of IS 2556 (Part 1) : 1994))	-	1500	-
Cl. 3 - General Requirements ( Ref. Cl.9.6 of IS 2556 (Part 1) : 1994)(Resistance to staining and burning, Annex - C of IS 2556 (Part 1) : 1994))	-	1000	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Wavy finiah-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Warpages-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Dislocations-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Service space top of slab inside of bowl, front of fascis-Spots, blisters and pinholes-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Service space top of slab inside of bowl, front of fascis-Bubbles and specks-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Service space top of slab inside of bowl, front of fascis-Polishing marks-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Spots, blisters and pinholes-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Bubbles and specks-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Polishing marks-IS 2556 (Part 1)))	-	200	-
3(General requirements-Thickness IS 2556 (Part 1))	-	100	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WARPAGE IS 2556 (Part 1))	-	100	-
3(General requirements-PERFORMANCE REQUIllEMENTS-CRAZING IS 2556 (Part 1))	-	1200	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Individual IS 2556 (Part 1))	-	1500	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Average (IS 2556 (Part 1))	-	1500	-
4(Sizes)	-	200	-
5-Table 1( DIMENSIONS AND TOLERANCES-L)	-	200	-
5-Table 1( DIMENSIONS AND TOLERANCES-B)	-	200	-
5-Table 1( DIMENSIONS AND TOLERANCES-H)	-	200	-
5-Table 1( DIMENSIONS AND TOLERANCES-a)	-	200	-
5-Table 1( DIMENSIONS AND TOLERANCES-b)	-	200	-
5-Table 1( DIMENSIONS AND TOLERANCES-c)	-	200	-
6.1(Constructions-)	-	200	-
6.2(Constructions-)	-	200	-
6.2(Constructions-)	-	200	-
6.2(Constructions-)	-	200	-
6.2-Table 2(Constructions-Dimensions of the Waste Outlet Hole-d3)	-	200	-
6.2-Table 2(Constructions-Dimensions of the Waste Outlet Hole-d4)	-	200	-
6.2-Table 2(Constructions-Dimensions of the Waste Outlet Hole-d5)	-	200	-
6.2-Table 2(Constructions-Dimensions of the Waste Outlet Hole-d6)	-	200	-
6.2-Table 2(Constructions-Dimensions of the Waste Outlet Hole-h Min.)	-	200	-
6.2-Table 2(Constructions-Dimensions of the Waste Outlet Hole-h Max.)	-	200	-
6.2-Table 2(Constructions-Dimensions of the Waste Outlet Hole-h1 Min.)	-	200	-
6.2-Table 2(Constructions-Dimensions of the Waste Outlet Hole-h1 Max.)	-	200	-
6.2.1(Constructions)	-	200	-
6.4(Constructions-outlet )	-	200	-
6.5(Constructions-overflow hole)	-	200	-
7(FINISH)	-	200	-
Cl 3(GENERAL REQUIREMENTS)	-	200	-
Cl 4(SIZES)	-	200	-
Cl 5, Table 1, Fig. 1.(DIMENSIONS AND TOLERANCES)	-	200	-
Cl 6.1(CONSTRUCTION)	-	200	-
Cl 6.2(CONSTRUCTION)	-	200	-
Cl 6.2(CONSTRUCTION)	-	200	-
Cl 6.2, Table 2(CONSTRUCTION)	-	200	-
Cl 6.2.1(CONSTRUCTION)	-	200	-
Cl 6.3(CONSTRUCTION)	-	200	-
Cl 6.4(CONSTRUCTION)	-	200	-
Cl 6.5(CONSTRUCTION)	-	200	-
Cl 7(Finish)	-	200	-
Cl. 3 - General Requirements ( Ref. Cl.5.2 of IS 2556 (Part 1) : 1994)(Lead or a lead compound, Annex - A of IS 2556 (Part 1) : 1994))	-	800	-
Cl. 3 - General Requirements ( Ref. Cl.9.5 of IS 2556 (Part 1) : 1994)(Chemical Resistance, Annex - B of IS 2556 (Part 1) : 1994))	-	1500	-
Cl. 3 - General Requirements ( Ref. Cl.9.6 of IS 2556 (Part 1) : 1994)(Resistance to staining and burning, Annex - C of IS 2556 (Part 1) : 1994))	-	1000	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Wavy finiah-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Warpages-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Dislocations-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Service space top of slab inside of bowl, front of fascis-Spots, blisters and pinholes-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Service space top of slab inside of bowl, front of fascis-Bubbles and specks-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Service space top of slab inside of bowl, front of fascis-Polishing marks-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Spots, blisters and pinholes-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Bubbles and specks-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Polishing marks-IS 2556 (Part 1)))	-	200	-
3(General requirements-Thickness IS 2556 (Part 1))	-	100	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WARPAGE IS 2556 (Part 1))	-	100	-
3(General requirements-PERFORMANCE REQUIllEMENTS-CRAZING IS 2556 (Part 1))	-	1200	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Individual IS 2556 (Part 1))	-	1500	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Average (IS 2556 (Part 1))	-	1500	-
4(Sizes)	-	200	-
5-Table 1( DIMENSIONS AND TOLERANCES-L)	-	200	-
5-Table 1( DIMENSIONS AND TOLERANCES-B)	-	200	-
5-Table 1( DIMENSIONS AND TOLERANCES-H)	-	200	-
5-Table 1( DIMENSIONS AND TOLERANCES-a)	-	200	-
5-Table 1( DIMENSIONS AND TOLERANCES-b)	-	200	-
5-Table 1( DIMENSIONS AND TOLERANCES-c)	-	200	-
6.1(Constructions-)	-	200	-
6.2(Constructions-)	-	200	-
6.2(Constructions-)	-	200	-
6.2(Constructions-)	-	200	-
6.2-Table 2(Constructions-Dimensions of the Waste Outlet Hole-d3)	-	200	-
6.2-Table 2(Constructions-Dimensions of the Waste Outlet Hole-d5)	-	200	-
6.2-Table 2(Constructions-Dimensions of the Waste Outlet Hole-d6)	-	200	-
6.2-Table 2(Constructions-Dimensions of the Waste Outlet Hole-h Min.)	-	200	-
6.2-Table 2(Constructions-Dimensions of the Waste Outlet Hole-h Max.)	-	200	-
6.2.1(Constructions)	-	200	-
6.4(Constructions-outlet )	-	200	-
6.5(Constructions-overflow hole)	-	200	-
7(FINISH)	-	200	-
Cl 3(GENERAL REQUIREMENTS)	-	200	-
Cl 4(SIZES)	-	200	-
Cl 5, Table 1, Fig. 1.(DIMENSIONS AND TOLERANCES)	-	200	-
Cl 6.1(CONSTRUCTION)	-	200	-
Cl 6.2(CONSTRUCTION)	-	200	-
Cl 6.2(CONSTRUCTION)	-	200	-
Cl 6.2, Table 2(CONSTRUCTION)	-	200	-
Cl 6.2.1(CONSTRUCTION)	-	200	-
Cl 6.3(CONSTRUCTION)	-	200	-
Cl 6.4(CONSTRUCTION)	-	200	-
Cl 6.5(CONSTRUCTION)	-	200	-
Cl 7(Finish)	-	200	-
Clause 3 and Clause 9.4 of IS 2556 (Part 1)(Modulus of Rupture)	-	1500	-
Clause 3 and Clause 6.4 of IS 2556 Part 1(Illumination during visual observation)	-	200	-

Complete

07 Feb, 2027

-
Included w.e.f. 10.04.2024

IS 2556 : Part 4 (2004)

Vitreous sanitary appliances (Vitreous China) - specification: Part 4 specific requirements of wash basins

Flat Back , Angle back and any other pattern and size

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3 and Clause 5.2 of IS 2556(Part 1)(Lead solubility test)	-	800	-
Clause 3 and Clause 9.5 of IS 2556(Part 1)(Chemical Resistance Test)	-	1500	-
Clause 3 and Clause 9.6 of IS 2556(Part 1)(Resistance to staining and burning)	-	1000	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Wavy finiah-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Warpages-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Dislocations-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Service space top of slab inside of bowl, front of fascis-Spots, blisters and pinholes-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Service space top of slab inside of bowl, front of fascis-Bubbles and specks-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Service space top of slab inside of bowl, front of fascis-Polishing marks-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Spots, blisters and pinholes-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Bubbles and specks-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Polishing marks-IS 2556 (Part 1)))	-	200	-
3(General requirements-Thickness IS 2556 (Part 1))	-	100	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WARPAGE IS 2556 (Part 1))	-	100	-
3(General requirements-PERFORMANCE REQUIllEMENTS-CRAZING IS 2556 (Part 1))	-	1200	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Individual IS 2556 (Part 1))	-	1500	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Average (IS 2556 (Part 1))	-	1500	-
3(General requirements-PERFORMANCE REQUIllEMENTS-MODULUS OF RUPTURE IS 2556 (Part 1))	-	1500	-
4(PAITERNS)	-	200	-
4(SIZE)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Functional Dimensions-A)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Functional Dimensions-B)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Functional Dimensions-B)	-	200	-
5.2.1(DIMENSIONS AND TOLERANCES-Connecting Dimensions)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-d1)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-d2)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-e)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-f1)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-f2)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-g1)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-g2)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-g3)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-g4)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-g4)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-r)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-r1)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-s)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-t)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-d2)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-g1)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-g4)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-g4)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-r)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-r1)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-s)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-t)	-	200	-
5.2.4-Table 5(DIMENSIONS AND TOLERANCES-Dimensions or Waste Outlet Hole-d3)	-	200	-
5.2.4-Table 5(DIMENSIONS AND TOLERANCES-Dimensions or Waste Outlet Hole-d5)	-	200	-
5.2.4-Table 5(DIMENSIONS AND TOLERANCES-Dimensions or Waste Outlet Hole-d6)	-	200	-
5.2.4-Table 5(DIMENSIONS AND TOLERANCES-Dimensions or Waste Outlet Hole-h)	-	200	-
5.2.4-Table 5(DIMENSIONS AND TOLERANCES-Dimensions or Waste Outlet Hole-p)	-	200	-
5.2.5-Table 6(DIMENSIONS AND TOLERANCES-Fixing Dimensions for Wall Hung Wash Basin-n)	-	200	-
5.2.5-Table 6(DIMENSIONS AND TOLERANCES-Fixing Dimensions for Wall Hung Wash Basin-p)	-	200	-
6.1(CONSTRUCTION)	-	200	-
6.1(CONSTRUCTION)	-	200	-
6.1.1(CONSTRUCTION)	-	200	-
6.2(CONSTRUCTION-Tap Holes)	-	200	-
6.2(CONSTRUCTION-Tap Holes)	-	200	-
6.2(CONSTRUCTION-Tap Holes)	-	200	-
6.3-Table 5(CONSTRUCTION-Waste Hole)	-	200	-
6.3(CONSTRUCTION-Waste Hole-Flange dia west fitting)	-	200	-
6.4.1(CONSTRUCTION-Fixing Arrangements-Bracket Stud)	-	200	-
6.4.1(CONSTRUCTION-Fixing Arrangements-Bracket Stud-Horizontal distance between two stud)	-	200	-
6.4.2(CONSTRUCTION-Fixing Arrangements-Screw Fixing-Holes)	-	200	-
6.4.2(CONSTRUCTION-Fixing Arrangements-Screw Fixing-Hole dia)	-	200	-
6.4.3(CONSTRUCTION-Fixing Arrangements-Rag Bolt)	-	200	-
6.5(CONSTRUCTION-Overflow-horizontal dimension )	-	200	-
6.5(CONSTRUCTION-Overflow-Area)	-	200	-
6.5(CONSTRUCTION-Overflow-The rate of water supply)	-	200	-
6.6(CONSTRUCTION-Soap Recess(es))	-	200	-
6.7(CONSTRUCTION-Load Bearing Test)	-	1000	-
6.8(CONSTRUCTION-Chain Stay Hole-Dia)	-	200	-
6.9(CONSTRUCTION-Pedestal)	-	200	-
6.9(CONSTRUCTION-Pedestal)	-	200	-
6.9(CONSTRUCTION-Pedestal)	-	200	-
6.9(CONSTRUCTION-Pedestal-The height from the floor to top of the rim of basin)	-	200	-
7(FINISH)	-	200	-
Clause 3 and Clause 5.2 of IS 2556(Part 1)(Lead solubility test)	-	800	-
Clause 3 and Clause 9.5 of IS 2556(Part 1)(Chemical Resistance Test)	-	1500	-
Clause 3 and Clause 9.6 of IS 2556(Part 1)(Resistance to staining and burning)	-	1000	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Wavy finiah-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Warpages-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Dislocations-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Service space top of slab inside of bowl, front of fascis-Spots, blisters and pinholes-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Service space top of slab inside of bowl, front of fascis-Bubbles and specks-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Service space top of slab inside of bowl, front of fascis-Polishing marks-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Spots, blisters and pinholes-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Bubbles and specks-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Polishing marks-IS 2556 (Part 1)))	-	200	-
3(General requirements-Thickness IS 2556 (Part 1))	-	100	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WARPAGE IS 2556 (Part 1))	-	100	-
3(General requirements-PERFORMANCE REQUIllEMENTS-CRAZING IS 2556 (Part 1))	-	1200	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Individual IS 2556 (Part 1))	-	1500	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Average (IS 2556 (Part 1))	-	1500	-
3(General requirements-PERFORMANCE REQUIllEMENTS-MODULUS OF RUPTURE IS 2556 (Part 1))	-	1000	-
4(PAITERNS)	-	200	-
4(SIZE)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Functional Dimensions-A)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Functional Dimensions-B)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Functional Dimensions-B)	-	200	-
5.2.1(DIMENSIONS AND TOLERANCES-Connecting Dimensions)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-d1)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-d2)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-e)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-f1)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-f2)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-g1)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-g2)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-g3)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-g4)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-g4)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-r)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-r1)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-s)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-t)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-d2)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-g1)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-g4)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-g4)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-r)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-r1)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-s)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-t)	-	200	-
5.2.4-Table 5(DIMENSIONS AND TOLERANCES-Dimensions or Waste Outlet Hole-d3)	-	200	-
5.2.4-Table 5(DIMENSIONS AND TOLERANCES-Dimensions or Waste Outlet Hole-d5)	-	200	-
5.2.4-Table 5(DIMENSIONS AND TOLERANCES-Dimensions or Waste Outlet Hole-d6)	-	200	-
5.2.4-Table 5(DIMENSIONS AND TOLERANCES-Dimensions or Waste Outlet Hole-h)	-	200	-
5.2.4-Table 5(DIMENSIONS AND TOLERANCES-Dimensions or Waste Outlet Hole-p)	-	200	-
5.2.5-Table 6(DIMENSIONS AND TOLERANCES-Fixing Dimensions for Wall Hung Wash Basin-n)	-	200	-
5.2.5-Table 6(DIMENSIONS AND TOLERANCES-Fixing Dimensions for Wall Hung Wash Basin-p)	-	200	-
6.1(CONSTRUCTION)	-	200	-
6.1(CONSTRUCTION)	-	200	-
6.1.1(CONSTRUCTION)	-	200	-
6.2(CONSTRUCTION-Tap Holes)	-	200	-
6.2(CONSTRUCTION-Tap Holes)	-	200	-
6.2(CONSTRUCTION-Tap Holes)	-	200	-
6.3-Table 5(CONSTRUCTION-Waste Hole)	-	200	-
6.3(CONSTRUCTION-Waste Hole-Flange dia west fitting)	-	200	-
6.4.1(CONSTRUCTION-Fixing Arrangements-Bracket Stud)	-	200	-
6.4.1(CONSTRUCTION-Fixing Arrangements-Bracket Stud-Horizontal distance between two stud)	-	200	-
6.4.2(CONSTRUCTION-Fixing Arrangements-Screw Fixing-Holes)	-	200	-
6.4.2(CONSTRUCTION-Fixing Arrangements-Screw Fixing-Hole dia)	-	200	-
6.4.3(CONSTRUCTION-Fixing Arrangements-Rag Bolt)	-	200	-
6.5(CONSTRUCTION-Overflow-horizontal dimension )	-	200	-
6.5(CONSTRUCTION-Overflow-Area)	-	200	-
6.5(CONSTRUCTION-Overflow-The rate of water supply)	-	200	-
6.6(CONSTRUCTION-Soap Recess(es))	-	200	-
6.7(CONSTRUCTION-Load Bearing Test)	-	1000	-
6.8(CONSTRUCTION-Chain Stay Hole-Dia)	-	200	-
6.9(CONSTRUCTION-Pedestal)	-	200	-
6.9(CONSTRUCTION-Pedestal)	-	200	-
6.9(CONSTRUCTION-Pedestal)	-	200	-
6.9(CONSTRUCTION-Pedestal-The height from the floor to top of the rim of basin)	-	200	-
7(FINISH)	-	200	-
Clause 3 and Clause 5.2 of IS 2556(Part 1)(Lead solubility test)	-	800	-
Clause 3 and Clause 9.5 of IS 2556(Part 1)(Chemical Resistance Test)	-	1500	-
Clause 3 and Clause 9.6 of IS 2556(Part 1)(Resistance to staining and burning)	-	1000	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Wavy finiah-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Warpages-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Dislocations-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Service space top of slab inside of bowl, front of fascis-Spots, blisters and pinholes-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Service space top of slab inside of bowl, front of fascis-Bubbles and specks-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Service space top of slab inside of bowl, front of fascis-Polishing marks-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Spots, blisters and pinholes-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Bubbles and specks-IS 2556 (Part 1)))	-	200	-
3(General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Polishing marks-IS 2556 (Part 1)))	-	200	-
3(General requirements-Thickness IS 2556 (Part 1))	-	100	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WARPAGE IS 2556 (Part 1))	-	100	-
3(General requirements-PERFORMANCE REQUIllEMENTS-CRAZING IS 2556 (Part 1))	-	1200	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Individual IS 2556 (Part 1))	-	1500	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Average (IS 2556 (Part 1))	-	1500	-
3(General requirements-PERFORMANCE REQUIllEMENTS-MODULUS OF RUPTURE IS 2556 (Part 1))	-	1500	-
4(PAITERNS)	-	200	-
4(SIZE)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Functional Dimensions-A)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Functional Dimensions-B)	-	200	-
5.1-Table 2(DIMENSIONS AND TOLERANCES-Functional Dimensions-B)	-	200	-
5.2.1(DIMENSIONS AND TOLERANCES-Connecting Dimensions)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-d1)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-d2)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-e)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-f1)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-f2)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-g1)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-g2)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-g3)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-g4)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-g4)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-r)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-r1)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-s)	-	200	-
5.2.2-Table 3(DIMENSIONS AND TOLERANCES-Connecting Dimensions-t)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-d2)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-g1)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-g4)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-g4)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-r)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-r1)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-s)	-	200	-
5.2.3-Table 4(DIMENSIONS AND TOLERANCES-Connecting Dimensions for Wash Basins with Centre Tap Hole-t)	-	200	-
5.2.4-Table 5(DIMENSIONS AND TOLERANCES-Dimensions or Waste Outlet Hole-d3)	-	200	-
5.2.4-Table 5(DIMENSIONS AND TOLERANCES-Dimensions or Waste Outlet Hole-d5)	-	200	-
5.2.4-Table 5(DIMENSIONS AND TOLERANCES-Dimensions or Waste Outlet Hole-d6)	-	200	-
5.2.4-Table 5(DIMENSIONS AND TOLERANCES-Dimensions or Waste Outlet Hole-h)	-	200	-
5.2.4-Table 5(DIMENSIONS AND TOLERANCES-Dimensions or Waste Outlet Hole-p)	-	200	-
5.2.5-Table 6(DIMENSIONS AND TOLERANCES-Fixing Dimensions for Wall Hung Wash Basin-n)	-	200	-
5.2.5-Table 6(DIMENSIONS AND TOLERANCES-Fixing Dimensions for Wall Hung Wash Basin-p)	-	200	-
6.1(CONSTRUCTION)	-	200	-
6.1(CONSTRUCTION)	-	200	-
6.1.1(CONSTRUCTION)	-	200	-
6.2(CONSTRUCTION-Tap Holes)	-	200	-
6.2(CONSTRUCTION-Tap Holes)	-	200	-
6.2(CONSTRUCTION-Tap Holes)	-	200	-
6.3-Table 5(CONSTRUCTION-Waste Hole)	-	200	-
6.3(CONSTRUCTION-Waste Hole-Flange dia west fitting)	-	200	-
6.4.1(CONSTRUCTION-Fixing Arrangements-Bracket Stud)	-	200	-
6.4.1(CONSTRUCTION-Fixing Arrangements-Bracket Stud-Horizontal distance between two stud)	-	200	-
6.4.2(CONSTRUCTION-Fixing Arrangements-Screw Fixing-Holes)	-	200	-
6.4.2(CONSTRUCTION-Fixing Arrangements-Screw Fixing-Hole dia)	-	200	-
6.4.3(CONSTRUCTION-Fixing Arrangements-Rag Bolt)	-	200	-
6.5(CONSTRUCTION-Overflow-horizontal dimension )	-	200	-
6.5(CONSTRUCTION-Overflow-Area)	-	200	-
6.5(CONSTRUCTION-Overflow-The rate of water supply)	-	200	-
6.6(CONSTRUCTION-Soap Recess(es))	-	200	-
6.7(CONSTRUCTION-Load Bearing Test)	-	1000	-
6.8(CONSTRUCTION-Chain Stay Hole-Dia)	-	200	-
6.9(CONSTRUCTION-Pedestal)	-	200	-
6.9(CONSTRUCTION-Pedestal)	-	200	-
6.9(CONSTRUCTION-Pedestal)	-	200	-
6.9(CONSTRUCTION-Pedestal-The height from the floor to top of the rim of basin)	-	200	-
7(FINISH)	-	200	-
Cl-5.2.4, Table- 5 (v)(Dimensions and tolerances-Depth of overflow slot for waste outlet hole with integral overflow, h1)	-	200	-
Clause 3 and Clause 6.4 of IS 2556 Part 1(Illumination during visual observation)	-	200	-

Complete

07 Feb, 2027

-
Included w.e.f. 10.04.2024

IS 2556 : Part 2 (2004)

Vitreous sanitary appliances (Vitreous China) - specification: Part 2 specific requirements of washdown water closets

Pattern 1,2,3,4 and any other Pattern or size

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3 and Clause 5.2 of IS 2556(Part 1)(Lead solubility test)	-	800	-
Clause 3 and Clause 9.5 of IS 2556(Part 1)(Chemical Resistance Test)	-	1500	-
Clause 3 and Clause 9.6 of IS 2556(Part 1)(Resistance to staining and burning)	-	1000	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Wavy finiah-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Warpage -IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Discoloration-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-·Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Spots. blisters and pinholes-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Bubbles and specks-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing Marks-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Spots, blisters and pinholes -IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Bubbles and specks -IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing mark -IS 2556 (Part 1))	-	200	-
3(General requirements-Thickness IS 2556 (Part 1))	-	100	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WARPAGE IS 2556 (Part 1))	-	100	-
3(General requirements-PERFORMANCE REQUIllEMENTS-CRAZING IS 2556 (Part 1))	-	1200	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Individual IS 2556 (Part 1))	-	1500	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Average (IS 2556 (Part 1))	-	1500	-
4(PATTERNS)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - A)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - H)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - J)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - K)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - L)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - O)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - P)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - Q)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - S)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - T)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - W2)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - W1)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - C1)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - B)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - D)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - D1)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - C2)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - D2)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - E)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - G)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - F)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - G1)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - G3)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - G2)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - M)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - N)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - R)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - R1)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - Ɵ)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - X)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - Y)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - Y1)	-	200	-
6.1(CONSTRUCTION)	-	200	-
6.1(CONSTRUCTION)	-	200	-
6.2(CONSTRUCTION)	-	200	-
6.1(CONSTRUCTION)	-	200	-
6.3(CONSTRUCTION)	-	200	-
6.4(CONSTRUCTION)	-	200	-
7(FINISH)	-	200	-
8.1(TESTS)	-	200	-
8.2(TESTS)	-	200	-
8.3(TESTS)	-	200	-
8.4.1(TESTS)	-	200	-
8.4.2(TESTS)	-	200	-
8.5(TESTS)	-	200	-
8.6(TESTS)	-	200	-
8.7(TESTS)	-	200	-
Clause 3 and Clause 5.2 of IS 2556(Part 1)(Lead solubility test)	-	800	-
Clause 3 and Clause 9.5 of IS 2556(Part 1)(Chemical Resistance Test)	-	1500	-
Clause 3 and Clause 9.6 of IS 2556(Part 1)(Resistance to staining and burning)	-	1000	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Application of Glazing-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Wavy finiah-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Warpage -IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Discoloration-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-·Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Spots. blisters and pinholes-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Bubbles and specks-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing Marks-IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Spots, blisters and pinholes -IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Bubbles and specks -IS 2556 (Part 1))	-	200	-
3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing mark -IS 2556 (Part 1))	-	200	-
3(General requirements-Thickness IS 2556 (Part 1))	-	100	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WARPAGE IS 2556 (Part 1))	-	100	-
3(General requirements-PERFORMANCE REQUIllEMENTS-CRAZING IS 2556 (Part 1))	-	1200	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Individual IS 2556 (Part 1))	-	1500	-
3(General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Average (IS 2556 (Part 1))	-	1500	-
4(PATTERNS)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - A)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - H)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - J)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - K)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - L)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - O)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - P)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - Q)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - S)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - T)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - W2)	-	200	-
5 and Table 1 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - W1)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - C1)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - B)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - D)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - D1)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - C2)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - D2)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - E)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - G)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - F)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - G1)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - G3)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - G2)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - M)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - N)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - R)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - R1)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - Ɵ)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - X)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - Y)	-	200	-
5 and Table 2 Fig. 1, 2 , 3 & 4(DIMENSIONS AND TOLERANCES - Y1)	-	200	-
6.1(CONSTRUCTION)	-	200	-
6.1(CONSTRUCTION)	-	200	-
6.2(CONSTRUCTION)	-	200	-
6.1(CONSTRUCTION)	-	200	-
6.3(CONSTRUCTION)	-	200	-
6.4(CONSTRUCTION)	-	200	-
7(FINISH)	-	200	-
8.1(TESTS)	-	200	-
8.2(TESTS)	-	200	-
8.3(TESTS)	-	200	-
8.4.1(TESTS)	-	200	-
8.4.2(TESTS)	-	200	-
8.5(TESTS)	-	200	-
8.6(TESTS)	-	200	-
8.7(TESTS)	-	200	-
Clause 3 and Cl-6.1, 9.1 and 10.1 Table 1, i) of IS 2556 Part 1(General-Bit)	-	200	-
Clause 3 and Cl-6.1, 9.1 and 10.1 Table 1, i) of IS 2556 Part 1(General-Accessories)	-	200	-
Clause 3 and Cl-6.1, 9.1 and 10.1 Table 1, i) of IS 2556 Part 1(General-Other appliances)	-	200	-
Clause 3 and Clause 9.4 of IS 2556 (Part 1)(Modulus of Rupture)	-	1500	-
Clause 3 and Clause 5 of of IS 2556 (Part 1)(Application of glazing)	-	200	-
Clause 3 and Clause 6.4 of IS 2556 Part 1(Illumination during visual observation)	-	200	-

Complete

07 Feb, 2027

-
Included w.e.f. 10.04.2024

IS 14543 (2016)

Packaged drinking water (Other Than Packaged Natural Mineral Water) - Specification (Second Revision)

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4 ii)(Total pesticied residue)	-	3000	None
5.4 i)(Dieldrin)	-	3000	-
5.4 i)(Aldrin)	-	3000	-
5.4 i)(Malaoxon)	-	3000	-
5.4 i)(Malathion)	-	3000	-
5.4 i)(Methyl Paraoxon)	-	3000	-
5.4 i)(Methyl Parathion)	-	3000	-
5.4 i)(Atrazine)	-	3000	-
5.4 i)(Alachlor)	-	3000	-
5.4 i)(Isoproturon)	-	3000	-
5.4 i)(Butachlor)	-	3000	-
5.4 i)(2,4-D)	-	3000	-
5.4 i)(phorate sulphone)	-	3000	-
5.4 i)(Phorate sulphoxide)	-	3000	-
5.4 i)(Phorate)	-	3000	-
5.4 i)(Chlorpyrifos)	-	3000	-
5.4 i)(Ethion)	-	3000	-
5.4 i)(Monocrotophos)	-	3000	-
5.4 i)(Endosulfan Sulphate)	-	3000	-
5.4 i)(beta-Endosulfan)	-	3000	-
5.4 i)(alpha-Endosulfan)	-	3000	-
5.4 i)(Delta-HCH)	-	3000	-
5.4 i)(alpha-HCH)	-	3000	-
5.4 i)(beta-HCH)	-	3000	-
5.4 i)(Gamma-HCH (Lindane))	-	3000	-
5.4 i)(p,p DDD)	-	3000	-
5.4 i)(o,p DDD)	-	3000	-
5.4 i)(p,p DDE)	-	3000	-
5.4 i)(o,p DDE)	-	3000	-
5.4 i)(p,p DDT)	-	3000	-
5.4 i)(o,p DDT)	-	3000	-
5.3 Table-3 ix (Polynuclear aromatic hydrocarbons)	-	3000	-
5.3 Table-3 viii (Polychlorinated biphenyle (PCB))	-	3000	-
5.3 Table-3 vii(Nickel (as Ni))	-	2500	-
5.3 Table-3 vi(Chromium (as Cr))	-	2500	-
5.3 Table-3 v(Lead (as Pb))	-	2500	-
5.3 Table-3 iii(Arsenic (as As))	-	2500	-
5.3 Table-3 ii(Cadmium (as Cd))	-	2500	-
5.3 Table-3 i(Mercury (as Hg))	-	2500	-
5.3 Table-2 xxv(Bromates (as BrO3),)	-	2200	-
5.3 Table-3 iv (Cyanide (as CN))	-	1500	-
5.3 Table-2 xxiii(Antimony (as Sb))	-	2500	-
5.3 Table-2 xxiv(Borates (as B))	-	2500	-
5.3 Table-2 xxii(Sulphide (as H2S))	-	1200	-
5.3 Table-2 xxi (Anionic surface active agents (as MBAS))	-	2000	-
5.3 Table-2 xx(Mineral oil)	-	2200	-
5.3 Table-2 xviii(Residual free chlorine)	-	750	-
5.3 Table-2 xix (Phenolic compounds (as C6H5OH))	-	1500	-
5.3 Table-2 xvii(Sodium (as Na))	-	300	-
5.3 Table-2 xvi(Magnesium (as Mg))	-	300	-
5.3 Table-2 xiv(Alkaliniity (as HCO3))	-	350	-
5.3 Table-2 xv(Calcium (as Ca),)	-	350	-
5.3 Table-2 xii(Selenium (as Se),)	-	2500	-
5.3 Table-2 xiii(Sulphate (as SO4),)	-	450	-
5.3 Table-2 x(Aluminium (as Al))	-	2500	-
5.3 Table-2 ix(Silver (as Ag))	-	2500	-
5.3 Table-2 xi(Chloride (as Cl))	-	600	-
5.3 Table-2 viii(Zinc (as Zn))	-	2500	-
5.3 Table-2vii(Fluoride (as F))	-	350	-
5.3 Table-2 vi(Nitrite (as NO2))	-	350	-
5.3 Table-2 v(Nitrate (as NO3))	-	750	-
5.3 Table-2 iv(Manganese (as Mn))	-	2500	-
5.3 Table-2 iii(Iron (as Fe),)	-	2500	-
5.3 Table-2 ii(Copper (as Cu))	-	2500	-
5.3 Table-2 i(Barium (as Ba))	-	2500	-
5.3 Table-1 v(Total dissolved solids)	-	700	-
5.3 Table-1 iv(Turbidity)	-	300	-
5.3 Table-1 iii(Taste)	-	750	-
5.3 Table-1vi(pH)	-	250	-
5.3 Table-1 ii(Odour)	-	350	-
5.3 Table-1 i(Colour)	-	450	-
5.3(Description)	-	50	-
Table 3, x)(Uranium)	-	2500	-
5.2.1(Escherichia coli (or thermotolerant bacteria))	-	600	-
5.2.2(Coliform)	-	600	-
5.2.4(Sulphite Reducing Anaerobes)	-	850	-
5.2.3(Faecal Streptococci)	-	750	-
5.2.6(Aerobic Microbial Count at 37°C)	-	500	-
5.2.9(Vibrio parahaemolyticus)	-	750	-
5.2.8(Shigella)	-	750	-
5.2.8(Salmonella)	-	800	-
5.2.9(Vibrio cholera)	-	750	-
5.2.6(Aerobic Microbial Count at 20-22°C)	-	500	-
5.2.3(Staphylococcus Aureus)	-	750	-
5.2.5(Pseudomonas Aeruginosa)	-	750	-
5.2.7(Yeast and Mould)	-	600	-
5.4 i)(beta-Endosulfan)	-	3000	-
5.4 i)(alpha-Endosulfan)	-	3000	-
5.4 i)(Delta-HCH)	-	3000	-
5.4 i)(alpha-HCH)	-	3000	-
5.4 i)(beta-HCH)	-	3000	-
5.4 i)(Gamma-HCH (Lindane))	-	3000	-
5.4 i)(p,p DDE)	-	3000	-
5.3 Table-3 vii(Nickel (as Ni))	-	3000	-
5.3 Table-3 vi(Chromium (as Cr))	-	2500	-
5.3 Table-3 v(Lead (as Pb))	-	2500	-
5.3 Table-3 iii(Arsenic (as As))	-	2500	-
5.3 Table-3 ii(Cadmium (as Cd))	-	2500	-
5.3 Table-3 i(Mercury (as Hg))	-	2500	-
5.3 Table-2 xxv(Bromates (as BrO3),)	-	2500	-
5.3 Table-2 xxiii(Antimony (as Sb))	-	2500	-
5.3 Table-2 xxiv(Borates (as B))	-	750	-
5.3 Table-2 xxii(Sulphide (as H2S))	-	700	-
5.3 Table-2 xx(Mineral oil)	-	2500	-
5.3 Table-2 xviii(Residual free chlorine)	-	750	-
5.3 Table-2 xvii(Sodium (as Na))	-	300	-
5.3 Table-2 xvi(Magnesium (as Mg))	-	300	-
5.3 Table-2 xiv(Alkaliniity (as HCO3))	-	350	-
5.3 Table-2 xv(Calcium (as Ca),)	-	500	-
5.3 Table-2 xii(Selenium (as Se),)	-	2500	-
5.3 Table-2 xiii(Sulphate (as SO4),)	-	350	-
5.3 Table-2 x(Aluminium (as Al))	-	600	-
5.3 Table-2 ix(Silver (as Ag))	-	2500	-
5.3 Table-2 xi(Chloride (as Cl))	-	750	-
5.3 Table-2 viii(Zinc (as Zn))	-	1500	-
5.3 Table-2vii(Fluoride (as F))	-	750	-
5.3 Table-2 vi(Nitrite (as NO2))	-	450	-
5.3 Table-2 v(Nitrate (as NO3))	-	750	-
5.3 Table-2 iv(Manganese (as Mn))	-	2500	-
5.3 Table-2 iii(Iron (as Fe),)	-	1500	-
5.3 Table-2 ii(Copper (as Cu))	-	1500	-
5.3 Table-2 i(Barium (as Ba))	-	1500	-
5.3 Table-1 v(Total dissolved solids)	-	750	-
5.3 Table-1 iv(Turbidity)	-	400	-
5.3 Table-1 iii(Taste)	-	600	-
5.3 Table-1vi(pH)	-	350	-
5.3 Table-1 ii(Odour)	-	200	-
5.3 Table-1 i(Colour)	-	550	-
5.3(Description)	-	50	-
Table 3, x)(Uranium)	-	2500	-
5.2.9(Vibrio parahaemolyticus)	-	750	-
5.2.9(Vibrio cholera)	-	750	-
5.2.6(Aerobic Microbial Count at 20-22°C)	-	500	-
5.2.7(Yeast and Mould)	-	750	-

Complete

07 Feb, 2027

-
Included w.e.f. 02.04.2024 Exclusion: Cl.5.3 Table-4 ii (Beta emitters), Cl.5.3 Table-4 I (Alpha emitters)

Bureau of Indian Standards

The National Standards Body of India

HEXIQON LABORATORY PRIVATE LIMITED

PLOT NO 8, SHAYONA ESTATE PART-2, NR.LAMBDA RESEARCH LABORATORY,NR.AUDA WATER TANK,, GOTA,, AHMEDABAD, Ahmadabad, Gujarat, 382481

8487878021 hexiqonlab@gmail.com

Scope List