BIS - LIMS (Laboratory Information Management System)

Indian Institute of Packaging (IIP), Mumbai

Plot E2, MIDC Area, Andheri East, Road No.8, Post Box No. 9432, Mumbai 400093, Maharashtra, India, Andheri, Mumbai, Maharashtra, 400093

2228219803 rdiip@iip-in.com

Scope List

Reset

31 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 14738 (2017)

Flexible intermediate bulk containers (Fibcs) - Specification (First Revision)

35164 View breakup
-

Clause No.	Exclusion	Remark
Cl-4.1(Materials)	-	-
Cl-4.1.3(Breaking force)	-	-
Cl-4.1.4(UV-resistance)	-	-
Cl-4.2(Construction)	-	-
Cl-4.3(Design)	-	-
Cl-5.1(Perfromance Test)	-	-
Cl-5.2(Selection of FIBC for Testing)	-	-
Cl-6.1(Cyclic Top Lift Test)	-	-
Cl-6.1.1.1(Heavy duty re-usable FIBC)	-	-
Cl-6.1.1.2(Standard duty re-usable FIBC)	-	-
Cl-6.1.1.3(Single-trip FIBC)	-	-
Cl-6.1.1.4(Criteria for Conformity)	-	-
Cl-6.2.1(Compression/Stacking Test- Applicability)	-	-
Cl-6.2.2(Calculation of the Superimposed Load)	-	-
Cl-6.2.3(Duration of the Test)	-	-
Cl-6.2.4(Criteria for Passing the Test)	-	-
Cl-8(Marking)	-	-
Cl-4.1(Materials)	-	-
Cl-4.1.3(Breaking force)	-	-
Cl-4.1.4(UV-resistance)	-	-
Cl-4.2(Construction)	-	-
Cl-4.3(Design)	-	-
Cl-5.1(Perfromance Test)	-	-
Cl-5.2(Selection of FIBC for Testing)	-	-
Cl-6.1(Cyclic Top Lift Test)	-	-
Cl-6.1.1.1(Heavy duty re-usable FIBC)	-	-
Cl-6.1.1.2(Standard duty re-usable FIBC)	-	-
Cl-6.1.1.3(Single-trip FIBC)	-	-
Cl-6.1.1.4(Criteria for Conformity)	-	-
Cl-6.2.1(Compression/Stacking Test- Applicability)	-	-
Cl-6.2.2(Calculation of the Superimposed Load)	-	-
Cl-6.2.3(Duration of the Test)	-	-
Cl-6.2.4(Criteria for Passing the Test)	-	-
Cl-8(Marking)	-	-

30 Jun, 2028

-
Included w.e.f 09.10.2025

IS 2508 (2024)

Polyethylene Films and Sheets â Specification (Fourth Revision)

5760 View breakup
-

Clause No.	Exclusion	Remark
5.1.4 Sl No. (i) of Table 1, Table 2, Table 3 & Table 4.(Density - IS 13360 : Part 3 : Sec 10 : 2021)	-	-
5.1.6(Black Film- Carbon black - IS 2508:2024)	-	-
5.1.6(Ash content - IS 2508: 2024)	-	-
5.1.6(carbon black dispersion - IS 2530: 1963)	-	-
5.1.1(Appearance)	-	-
5.1.2(Film Form)	-	-
5.1.3(Odour)	-	-
5.1.5(Melt Flow Index- IS 13360 : Part 4 : Sec 1 : subsec 1 or IS 13360 : Part 4 : Sec 1 : subsec 2)	-	-
5.2.1.1/ Table-1,2,3 &4(Nominal Thickness, Annex C,)	-	-
5.2.1.2(Nominal Width)	-	-
6, Type 1 (LDPE/LLDPE) /Table-1("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-
6/Table-1("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-
6/Table-1("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-
6/Table-1("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-
6/Table-1(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	-
6/Table-1(Tear resistance -Machine direction, IS 13360 (Part 5/Sec 23))	-	-
6/Table-1(Tear resistance-Transverse direction, IS 13360 (Part 5/Sec 23))	-	-
" 7, Type 2 (HDPE/PE) /Table-2"("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-
" 7/Table-2"("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-
" 7/Table-2"("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-
" 7/Table-2"("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-
" 7/Table-2"(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	-
8, Type 3 (LDPE/LLDPE, PE) /Table-3("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-
8/Table-3("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-
8/Table-3("Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-
8/Table-3("Average Tensile Break Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-
8/Table-3(Average Tear resistance, IS 2508: 2024 Annex-D)	-	-
8/Table-3(Average Puncture resistance, IS 2508: 2024 Annex-E)	-	-
9, Type 4 (HDPE/PE) /Table-4("Average Yield strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-
9/Table-4("Average Yield strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-
9/Table-4("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-
9/Table-4("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-
9/Table-4("Average Tensile yield Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-
9/Table-4("Average Tensile yield Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-
9/Table-4(Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3))	-	-
9/Table-4(Average Tensile Break Elongation -Transverse Direction, IS 13360 (Part 5/Sec 1) and S 13360 (Part 5/Sec 3))	-	-
9/Table-4(Average Tear resistance, IS 2508: 2024 Annex-D)	-	-

30 Jun, 2028

-
Included w.e.f 12.09.2025

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

6315 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0 (chem)(MATERIAL)	-	1650	-
4.6.2(TRANSPARANCY)	-	175	-
4.6.3(LEAKAGE TEST)	-	500	-
4.6.5(MIGRATION TEST)	-	1815	-
4.6.6(PORTABILITY TEST)	-	500	-
4.6.6 (chem)(Water Potability test (after 30 days) (a) Taste (b) Odour)	-	0	-
4.6.5.1 (chem)(Colour migration (Caps))	-	1815	-
4.6.5.1 (chem)(Colour migration (Container))	-	0	-
4.6.4, clause 8 of IS:2798:1998(Drop test )	-	500	-
4.6.3, clause 6 of IS:2798:1998(Leakage test- c. Air pressure leakage)	-	137	-
4.6.3, clause 6 of IS:2798:1998(Leakage test- b. Vibration leakage)	-	500	-
4.6.3, clause 6 of IS:2798:1998(Leakage test- a. Closure leakage )	-	137	-
4.6.2.1, Annex A(Transparency (Blue tint in polycarbonate & PET containers of 5 litre and above capacity))	-	175	-
4.5, IS:2798:1998(Wall thickness- Bottom, in mm)	-	375	-
4.5, IS:2798:1998(Wall thickness- Middle , in mm)	-	375	-
4.5, IS:2798:1998(Wall thickness- Top , in mm )	-	375	-
4.4 , clause 5 of IS:2798:1998(Brimful capacity in ml)	-	250	-
4.3(Workmanship, Finish & Appearance)	-	0	-
4.2(Design, Shape & Dimension )	-	0	-
4.1(Material)	-	0	-
Cl. 4.5(Cl. 4.5 Wall Thickness (Bottom))	-	0	-
Cl. 4.5(Cl. 4.5 Wall Thickness (Middle))	-	0	-
Cl. 4.5(Cl. 4.5 Wall Thickness (Top))	-	0	-
Cl. 4.4 (a)(Capacity)	-	0	-
Cl. 4.3.2(Cl. 4.3.2 Finish & Appearance)	-	0	-
Cl. 4.2(Cl. 4.2 Design, Shape & Dimension)	-	0	-
Cl. 4.6.5 (chem)(Cl. 4.6.5 Color migration (Caps))	-	0	-
Cl. 4.6.5 (chem)(Cl. 4.6.5 Overall migration (Caps))	-	0	-
Cl. 4.6.5(Cl. 4.6.5 Migration)	-	0	-
Cl. 4.6.3(Cl. 4.6.3 Air Pressure Leakage)	-	0	-
Cl. 4.6.3(Cl. 4.6.3 Vibration Leakage)	-	0	-
Cl. 4.6.3( Cl. 4.6.3 Closure Leakage)	-	0	-
4.6.2.1, Annex-A(Transparency of container)	-	0	-
4.4 (b)(Brimful Capacity)	-	0	-
4.6.6.b (chem)(Water Potability Test (b) Taste)	-	0	-
4.6.6.a (chem)(Water Potability Test (a) Odour)	-	0	-
4.6.5 (chem)(c. Colour Migration (Cap))	-	0	-
4.6.5.1.b(Colour migration Test (Cap))	-	0	-
4.6.5.1.a(Colour migration Test (Container))	-	0	-
4.6.4 (chem)(Drop Test)	-	0	-
4.6.3 (chem)(c) Air pressure leakage test)	-	0	-
4.6.3 (chem)(b) Vibration leakage test)	-	0	-
4.6.3 (chem)(Leakage Test a) Closures leakage test)	-	0	-
4.6.2 (chem)(Transparency,)	-	0	-
4.5 (chem)((c) Wall Thickness, mm Bottom)	-	0	-
4.5 (chem)((b) Wall Thickness, mm Middle)	-	0	-
4.5 (chem)(a) Wall Thickness, mm Top)	-	0	-
4.4 (chem)(Brimful capacity)	-	0	-
4.3 (chem)(Workmanship, Finish & Appearance)	-	0	-
4.2 (chem)(a) Peelability)	-	0	-
4.2 (chem)(Design, Shape & Dimension)	-	0	-
4.1 (chem)(Workmanship and Finish)	-	0	-
Cl. 4.4 (a) (chem)(Capacity)	-	250	-
4.2(Design Shape & Dimentions)	-	0	-
4.3(Manufacture,Workmanship,Finish & appearance)	-	0	-
4.4(Capacity)	-	0	-
4.6.1(Environmental Stress-Crack Resistance)	-	0	-
5(Marking)	-	0	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (i)(Barium)	-	0	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ii)(Cobalt)	-	0	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iii)(Copper)	-	0	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iv)(Iron)	-	0	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (v)(Lithium)	-	0	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vi)(Manganese)	-	0	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vii)(Zinc)	-	0	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (viii)(Antimony)	-	0	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	0	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (i)(Barium)	-	0	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (ii)(Cobalt)	-	0	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (iii)(Copper)	-	0	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (iv)(Iron)	-	0	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (v)(Lithium)	-	0	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (vi)(Manganese)	-	0	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (vii)(Zinc)	-	0	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (viii)(Antimony)	-	0	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	0	-
4.1(Material)	-	0	-
4.2(Design, Shape and Dimensions)	-	0	-
4.3(Workmanship and Finish)	-	0	-
4.4(Capacity)	-	0	-
4.5(Wall Thickness)	-	0	-
4.6.1(Environmental Stress-Crack Resistance)	-	0	-
4.6.2(Transparency)	-	0	-
4.6.3(Leakage Test)	-	0	-
4.6.4(Drop Test)	-	0	-
4.6.5(Migration Test)	-	0	-
4.6.6(Water potability Test)	-	0	-
5(Packing and Marking)	-	0	-
Clauses 5.3.9.2 and 5.3.9.3,Table 3, S.no.(ix)(Phthalic acid, bis(2-ethylhexyl)ester (DEHP)-ISO 18856)	-	0	-
Cl. 4.1(Material test for container)	-	0	-
Cl. 4.6.5(Overall migration for container)	-	0	-
Cl. 4.6.5.1(Colour migration for container)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(i)(Specific migration for container,Barium)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ii)(Specific migration for container,Cobalt)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iii)(Specific migration for container,Copper)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iv)(Specific migration for container,Iron)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(v)(Specific migration for container,Lithium)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vi)(Specific migration for container,Manganese)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vii)(Specific migration for container,Zinc)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(viii)(Specific migration for container,Antimony)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ix)("Specific migration for container,Phthalic acid, bis(2-ethylhexyl) ester (DEHP)")	-	0	-
Cl. 4.6.5(Overall migration for Cap)	-	0	-
Cl. 4.6.5.1(Colour migration for Cap)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(i)(Specific migration for Cap,Barium)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ii)(Specific migration for Cap,Cobalt)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iii)(Specific migration for Cap,Copper)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iv)(Specific migration for Cap,Iron)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(v)(Specific migration for Cap,Lithium)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vi)(Specific migration for Cap,Manganese)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vii)(Specific migration for Cap,Zinc)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ix)("Specific migration for Cap,Phthalic acid, bis(2-ethylhexyl) ester (DEHP)")	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(viii)(Specific migration for Cap,Antimony)	-	0	-
4.6.4(DROP TEST)	-	0	-
4.6.5 , IS:9845:1998 (chem)(Migration of Caps - a. Amount of extractive)	-	0	-
4.6.5 , IS:9845:1998 (chem)(Migration- b. Amount of extractive)	-	0	-
4.6.5 , IS:9845:1998 (chem)(Migration- a. Amount of extractive)	-	0	-

30 Jun, 2028

-
-

IS 15609 (2005)

Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification

7178 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.5 Annex J(Product resistance test for printed pouches)	-	125	-
7.4 Annex H(Ink adhesion test for printed pouches)	-	175	-
7.3 Annex G(Drop test )	-	500	-
7.2 Annex F(Stack Load test)	-	500	-
7.1 Annex E(Water Potability test (after 30 Days) a) Taste b) Odour)	-	500	-
6.1.10 Annex -6 of IS:2508:2016(Dart impact Resistance)	-	175	-
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - b. Crosswise direction)	-	175	-
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - a. Lengthwise direction)	-	0	-
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength b. Crosswise direction)	-	175	-
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength a. Lengthwise direction)	-	0	-
6.1.7 IS: 9845:1998(Migration- b. Colour migration)	-	1815	-
6.1.7 IS: 9845:1998(Migration- a. Amount of extractive )	-	1815	-
6.1.6(Width)	-	375	-
6.1.5 A-2 of IS: 2508:2016(Thickness)	-	375	-
6.1.4(Odour)	-	0	-
6.1.3(Winding of the Film )	-	0	-
6.1.2(Film Form)	-	0	-
6.1.1(Description)	-	0	-
5(Material)	-	1650	-
Cl. 7.1(Vibration Leakage Test)	-	500	-
Clause 7.2(Water Potability test (after 30 Days) a) Taste b) Odour)	-	0	-
6.1.7(Migration test)	-	0	-
7.2(Water potability)	-	0	-
7.3(Stack load test)	-	0	-
7.6(Product resistance test)	-	0	-
7.5(Ink adhesion test)	-	0	-
7.4(Drop test)	-	0	-
Table 3((i) Barium)	-	0	-
Table 3(ii) Cobalt)	-	0	-
Table 3(iii) Copper)	-	0	-
Table 3(iv) Iron)	-	0	-
Table 3(v) Lithium)	-	0	-
Table 3(vi) Manganese)	-	0	-
Table 3(vii) Zinc)	-	0	-
Table 3(viii) Antimony)	-	0	-
Table 3(ix) Phthalic acid, bis(2-ethylhexyl)ester (DEHP))	-	0	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (i)(Barium)	-	0	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (ii)(Cobalt)	-	0	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (iii)(Copper)	-	0	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (iv)(Iron)	-	0	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (v)(Lithium)	-	0	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (vi)(Manganese)	-	0	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (vii)(Zinc)	-	0	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (viii)(Antimony)	-	0	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	0	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (i)(Barium)	-	0	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (ii)(Cobalt)	-	0	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (ii)(Cobalt)	-	0	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (iii)(Copper)	-	0	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (iv)(Iron)	-	0	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (v)(Lithium)	-	0	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (vi)(Manganese)	-	0	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (vii)(Zinc)	-	0	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (viii)(Antimony)	-	0	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	0	-
5(Material)	-	0	-
6.1.1(Description)	-	0	-
6.1.2(Film Form)	-	0	-
6.1.3(Winding of Film)	-	0	-
6.1.4(Odour)	-	0	-
6.1.5(Thickness)	-	0	-
6.1.6(Width)	-	0	-
6.1.7(Overall Migration)	-	0	-
6.1.8(Tensile Strength)	-	0	-
6.1.9(Elongation at Break)	-	0	-
6.1.10(Dart Impact Resistance)	-	0	-
7.1(Vibration Leakage Test)	-	0	-
7.2(Water Potability Test)	-	0	-
7.3(Stack Load Test)	-	0	-
7.4(Drop Test)	-	0	-
7.5(Ink Adhesion Test)	-	0	-
7.6(Product Resistanace Test)	-	0	-
9(Packing and Marking)	-	0	-

30 Jun, 2028

-
-

IS 14625 (2015)

Plastics Feeding Bottles ( First Revision )

10555 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Physical Requirements)	-	0	-
Cl 5.1.3(Wall Thickness)	-	0	-
Cl 5.1.4(Capacity)	-	0	-
Cl 5.3.2(Transparecy)	-	0	-
Cl 5.3.3(Leakage Test)	-	0	-
Cl 5.3.4(Drop Test)	-	0	-
Cl 5.3.5(Ageing Resistance)	-	0	-
Cl 5.3.6(Compressive Deformation Resistance)	-	0	-
Cl 5.3.7(Product Resistance of Printed Containers)	-	0	-
Cl 5.1.3(Wall Thickness)	-	0	-
Cl 5.1.4(Capacity)	-	0	-
Cl 5.3.2(Transparecy)	-	0	-
Cl 5.3.3(Leakage Test)	-	0	-
Cl 5.3.4(Drop Test)	-	10555	OK
Cl 5.3.5(Ageing Resistance)	-	0	-
Cl 5.3.6(Compressive Deformation Resistance)	-	0	-
Cl 5.3.7(Product Resistance of Printed Containers)	-	0	-
Cl 5.1(Physical Requirements)	-	0	-
Cl 5.1.3(Wall Thickness)	-	0	-
Cl 5.1.4(Capacity)	-	0	-
Cl 5.3.2(Transparecy)	-	0	-
Cl 5.3.3(Leakage Test)	-	0	-
Cl 5.3.4(Drop Test)	-	0	-
Cl 5.3.5(Ageing Resistance)	-	0	-
Cl 5.3.6(Compressive Deformation Resistance)	-	0	-
Cl 5.3.7(Product Resistance of Printed Containers)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Antimony)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Arsenic)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Chromium)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Mercury)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Cadmium)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Lead)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Barium)	-	0	-
Sl. No. i), Table 1, Cl.5.2.1.7(Migration of certain elements - Selenium)	-	0	-
Cl 5.1.4.2 (a)(Test for permanency of Pigment)	-	0	-
5.3.8 a)(Migration Test a) Distilled water at 40±2° hrs)	-	0	-
5.3.8 b)(Migration Test b) n-Haptane at 38±1° C for 30 min)	-	0	-
4.1(Material Identification, Bisphenol A,)	-	0	-
4.2(Rubber Teats for Feeding bottle shall conform to IS 3565 (Workmanship and Finish, Acetone Extract, Free sulphur in Acetone Extract, Change in Physical property, Properties of Water Extract, pH of the Water Extract, Tension Set ))	-	0	-
5.1.1(Description, Design, shape & dimensions)	-	0	-
5.1.2(Manufacture, workmanship finish & appearance)	-	0	-
5.3.1(Environmental Stress Crack Resistance,)	-	0	-
Clause 5.3.1(Environmental Stress crack resistance)	-	0	-
Clause 5.1.4.2(Capacity Scale)	-	0	-
Clause 5.1.2.2(Workmanship.Finish and Appearance)	-	0	-
Clause 5.1.1 (Description)	-	0	-
Clause 4.2 (Teats)	-	0	-
Cl 5.3.7(Product Resistance of Printed Containers)	-	0	-
Cl 5.3.6(Compressive Deformation Resistance)	-	0	-
Cl 5.3.5(Ageing Resistance)	-	0	-
Cl 5.3.4(Drop Test)	-	0	-
Cl 5.3.3(Leakage Test)	-	0	-
Cl 5.3.2(Transparecy)	-	0	-
Cl 5.1.4(Capacity)	-	0	-
Cl 5.1.3(Wall Thickness at Top, Middle & Bottom ( Take every position 4 measurment and average will be reported))	-	0	-
Cl 5.1(Physical Requirements)	-	0	-
"IS 14625:2015 RA2020 Sub-clause 4.0 "(Material Identification)	-	0	-
Cl 5.1(Physical Requirements)	-	0	-
Cl 5.1.3(Wall Thickness)	-	0	-
Cl 5.1.4(Capacity)	-	0	-
Cl 5.3.2(Transparecy)	-	0	-
Cl 5.3.3(Leakage Test)	-	0	-
Cl 5.3.4(Drop Test)	-	0	-
Cl 5.3.5(Ageing Resistance)	-	0	-
Cl 5.3.6(Compressive Deformation Resistance)	-	0	-
Cl 5.3.7(Product Resistance of Printed Containers)	-	0	-
"IS 14625:2015 RA2020 Sub-clause 4.0 "(Material Identification)	-	0	-
Cl.5.2.1.7, Table-1(i)(Migration of certain elements, Reqiurement as per table 1, Arsenic)	-	0	-
Cl.5.2.1.7, Table-1(ii)(Migration of certain elements, Reqiurement as per table 1, Chromium)	-	0	-
Cl.5.2.1.7, Table-1(iii)(Migration of certain elements, Reqiurement as per table 1, Mercury)	-	0	-
Cl.5.2.1.7, Table-1(iv)(Migration of certain elements, Reqiurement as per table 1, Cadmium)	-	0	-
Cl.5.2.1.7, Table-1(v)(Migration of certain elements, Reqiurement as per table 1, Lead)	-	0	-
Cl.5.2.1.7, Table-1(vi)(Migration of certain elements, Reqiurement as per table 1, Barium)	-	0	-
Cl.5.2.1.7, Table-1(vii)(Migration of certain elements, Reqiurement as per table 1, Selenium)	-	0	-
Cl.5.3.8(Migration test a)Distilled water)	-	0	-
Cl.5.3.8(Migration test a)n-Heptane)	-	0	-
Cl.5.3.9.2, Table-3(i)(Specific migration , Barium)	-	0	-
Cl.5.3.9.2, Table-3(ii)(Specific migration , Cobalt)	-	0	-
Cl.5.3.9.2, Table-3(iii)(Specific migration , Copper)	-	0	-
Cl.5.3.9.2, Table-3(iv)(Specific migration , Iron)	-	0	-
Cl.5.3.9.2, Table-3(v)(Specific migration , Lithium)	-	0	-
Cl.5.3.9.2, Table-3(vi)(Specific migration , Manganese)	-	0	-
Cl.5.3.9.2, Table-3(vii)(Specific migration , Zinc)	-	0	-
Cl.5.3.9.2, Table-3(viii)(Specific migration , Antimony)	-	0	-
Clauses 5.3.9.2 and 5.3.9.3,Table 3, S.no.(ix)(Phthalic acid, bis(2-ethylhexyl)ester (DEHP)-ISO 18856)	-	0	-
Clause 5.2.1.7, S.No.(i)(Heavy metal,Antimony)	-	0	-
Clause 5.2.1.7, S.No.(ii)(Heavy metal,Arsenic)	-	0	-
Clause 5.2.1.7, S.No.(iii)(Heavy metal,Chromium)	-	0	-
Clause 5.2.1.7, S.No.(iv)(Heavy metal,Mercury)	-	0	-
Clause 5.2.1.7, S.No.(v)(Heavy metal,Cadmium)	-	0	-
Clause 5.2.1.7, S.No.(vi)(Heavy metal,Lead)	-	0	-
Clause 5.2.1.7, S.No.(vii)(Heavy metal,Barium)	-	0	-
Clause 5.2.1.7, S.No.(viii)(Heavy metal,Selenium)	-	0	-
Cl-5.2.1.2.2(pH meter)	-	0	-
Cl-5.2.1.2.3(Membrane filter)	-	0	-
Cl-5.2.1.2.4(Centrifuge)	-	0	-
Cl-5.2.1.3(Reagents)	-	0	-
Cl-5.2.1.3.1(Hydrochloric acid solution)	-	0	-
Cl-5.2.1.3.2(Hydrochloric acid solution)	-	0	-
Cl-7(Packing and Marking)	-	0	-

30 Jun, 2028

-
-

IS 9755 (2016)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing fertilizers – Specification (fifth revision)

12100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.6(Bottom Seam-The number of stitches/dm shall be 14 ± 2.)	-	0	-
3.4(Liner-The thickness(A-2 of IS 2508) shall be 40 μm ± 10 percent in case of HMHDPE/ HDPE.)	-	0	-
3.4(Liner-The thickness(A-2 of IS 2508) shall be 70 μm ± 10 percent in case of LDPE/LLDPE)	-	0	-
3.5(Bottom Seam-The two rows of stitches shall be separated from each other by minimum 5 mm)	-	0	-
3.6(Bottom Seam-the outer stitch shall be minimum 8 mm from the outer edge of the sacks.)	-	0	-
3.4(Liner-The width of the loose liner shall be minimum 20 mm more than the width of the sack.)	-	0	-
3.4.2(Liner-The bottom seal of the loose liner shall be at least 25 mm from the bottom edge.)	-	0	-
3.6(Bottom Seam-tThe stitching shall be done with double fold over seam to a depth of minimum 25 mm, so that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
3.1(MANUFACTURE-Raw Material- IS 10146 or IS 10910)	-	0	-
3.2(MANUFACTURE-)	-	0	-
3.2(MANUFACTURE)	-	0	-
3.3(Sacks)	-	0	-
3.3.1(Sacks-Table 1)	-	0	-
3.4(Liner)	-	0	-
3.4.1(Liner)	-	0	-
3.4.1(Liner)	-	0	-
3.4.2(Lamination)	-	0	-
3.4.2(Lamination)	-	0	-
3.5(Bottom Seam-(see IS 10789).)	-	0	-
3.6.1(Bottom Seam-)	-	0	-
3.6.1(Bottom Seam-)	-	0	-
3.6.1(Bottom Seam-)	-	0	-
3.7(Mouth of the Sack)	-	0	-
3.8(Capacity- The sack shall have the nominal capacity of 50 kg.)	-	0	-
4.1 , Table 1(REQUIREMENTS)	-	0	-
4.2(UV Resistance)	-	0	-
4.2(UV Resistance-The HDPE/PP woven fabric of sack made out of UV stabilized material shall have at least 50 percent of the original breaking strength when tested after the same has been exposed to UV radiation and weathering as per the method given in Annex D.)	-	0	-
4.3(Mass-(Annexure E))	-	0	-
3.6(Bottom Seam-The number of stitches/dm shall be 14 ± 2.)	-	0	-
3.4(Liner-The thickness(A-2 of IS 2508) shall be 40 μm ± 10 percent in case of HMHDPE/ HDPE.)	-	0	-
3.4(Liner-The thickness(A-2 of IS 2508) shall be 70 μm ± 10 percent in case of LDPE/LLDPE)	-	0	-
3.5(Bottom Seam-The two rows of stitches shall be separated from each other by minimum 5 mm)	-	0	-
3.6(Bottom Seam-the outer stitch shall be minimum 8 mm from the outer edge of the sacks.)	-	0	-
3.4(Liner-The width of the loose liner shall be minimum 20 mm more than the width of the sack.)	-	0	-
3.4.2(Liner-The bottom seal of the loose liner shall be at least 25 mm from the bottom edge.)	-	0	-
3.6(Bottom Seam-tThe stitching shall be done with double fold over seam to a depth of minimum 25 mm, so that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
3.1(MANUFACTURE-Raw Material- IS 10146 or IS 10910)	-	0	-
3.1(MANUFACTURE-Raw Material)	-	0	-
3.2(MANUFACTURE-)	-	0	-
3.2(MANUFACTURE)	-	0	-
3.3(Sacks)	-	0	-
3.3.1(Sacks-Table 1)	-	0	-
3.4(Liner)	-	0	-
3.4.1(Liner)	-	0	-
3.4.1(Liner)	-	0	-
3.4.2(Lamination)	-	0	-
3.4.2(Lamination)	-	0	-
3.5(Bottom Seam-(see IS 10789).)	-	0	-
3.6.1(Bottom Seam-)	-	0	-
3.6.1(Bottom Seam-)	-	0	-
3.6.1(Bottom Seam-)	-	0	-
3.7(Mouth of the Sack)	-	0	-
3.8(Capacity- The sack shall have the nominal capacity of 50 kg.)	-	0	-
4.1 , Table 1(REQUIREMENTS)	-	0	-
4.2(UV Resistance)	-	0	-
4.2(UV Resistance-The HDPE/PP woven fabric of sack made out of UV stabilized material shall have at least 50 percent of the original breaking strength when tested after the same has been exposed to UV radiation and weathering as per the method given in Annex D.)	-	0	-
4.3(Mass-(Annexure E))	-	0	-
3.6(Bottom Seam-The number of stitches/dm shall be 14 ± 2.)	-	12100	OK
3.4(Liner-The thickness(A-2 of IS 2508) shall be 40 μm ± 10 percent in case of HMHDPE/ HDPE.)	-	0	-
3.4(Liner-The thickness(A-2 of IS 2508) shall be 70 μm ± 10 percent in case of LDPE/LLDPE)	-	0	-
3.5(Bottom Seam-The two rows of stitches shall be separated from each other by minimum 5 mm)	-	0	-
3.6(Bottom Seam-the outer stitch shall be minimum 8 mm from the outer edge of the sacks.)	-	0	-
3.4(Liner-The width of the loose liner shall be minimum 20 mm more than the width of the sack.)	-	0	-
3.4.2(Liner-The bottom seal of the loose liner shall be at least 25 mm from the bottom edge.)	-	0	-
3.6(Bottom Seam-tThe stitching shall be done with double fold over seam to a depth of minimum 25 mm, so that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
3.1(MANUFACTURE-Raw Material- IS 10146 or IS 10910)	-	0	-
3.1(MANUFACTURE-Raw Material)	-	0	-
3.2(MANUFACTURE-)	-	0	-
3.2(MANUFACTURE)	-	0	-
3.3(Sacks)	-	0	-
3.3.1(Sacks-Table 1)	-	0	-
3.4(Liner)	-	0	-
3.4.1(Liner)	-	0	-
3.4.1(Liner)	-	0	-
3.4.2(Lamination)	-	0	-
3.4.2(Lamination)	-	0	-
3.5(Bottom Seam-(see IS 10789).)	-	0	-
3.6.1(Bottom Seam-)	-	0	-
3.6.1(Bottom Seam-)	-	0	-
3.6.1(Bottom Seam-)	-	0	-
3.7(Mouth of the Sack)	-	0	-
3.8(Capacity- The sack shall have the nominal capacity of 50 kg.)	-	0	-
4.1 , Table 1(REQUIREMENTS)	-	0	-
4.2(UV Resistance)	-	0	-
4.2(UV Resistance-The HDPE/PP woven fabric of sack made out of UV stabilized material shall have at least 50 percent of the original breaking strength when tested after the same has been exposed to UV radiation and weathering as per the method given in Annex D.)	-	0	-
4.3(Mass-(Annexure E))	-	0	-

30 Jun, 2028

-
-

IS 2552 (1989)

Steel drums (galvanized and ungalvanized) - Specification (Third Revision)

11600 View breakup
-

Clause No.	Exclusion	Remark
7.4(Dimensions)	-	-
Cl-5(Capacity and Dimensions)	-	-
Cl-6.1(The body and the ends of the drums)	-	-
Cl-6.2(Thickness)	-	-
Cl-7(Construction)	-	-
Cl-8(Finish)	-	-
Cl-9.1(Air Pressure Test)	-	-
Cl-9.2(Drop Test)	-	-
Cl-9.3(Handle Pull Test)	-	-
Cl-10(Marking)	-	-
Cl. 7.1(CONSTRUCTION (Body))	-	-
Cl. 7.2(drums with plains or corrugated bodies)	-	-
Cl. 7.3(ends)	-	-
Cl. 7.4(closures)	-	-
Cl.7.5(handle)	-	-
Cl. 8(finish)	-	-
Cl. 9.1(Testing (air pressure test))	-	-
Cl.9.2(Drop test)	-	-
Cl.9.3(Handle pull test)	-	-

30 Jun, 2028

-
-

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

12550 View breakup
-

Clause No.	Exclusion	Remark
3(TYPES)	-	-
4.1(Raw Material)	-	OK
4.2(Tapes – Width IS 6192 and IS 11197)	-	-
4.2(Tapes – Linear Density )	-	-
4.2(Construction)	-	-
4.3(Sacks)	-	-
4.3.1(Bottom Seam)	-	-
4.3.1( The two rows of stitches shall be separated from each other)	-	-
4.3.1( The outer stitch)	-	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	-
4.3.1(The number of stitches/dm)	-	-
4.3.2(Mouth)	-	-
4.4 and Table 1 i(Capacity)	-	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	-
5.2 and Table 1 iii(Ends per dm )	-	-
5.2 and Table 1 iv(Picks per dm )	-	-
5.1 and Table 1 v(Mass of sack )	-	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	-
5.2 and Table 1 x(Ash content )	-	-
3(TYPES)	-	-
4.1(Raw Material)	-	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	-
4.2(Tapes – Linear Density )	-	-
4.2(Construction)	-	-
4.3(Sacks)	-	-
4.3.1(Bottom Seam)	-	-
4.3.1( The two rows of stitches shall be separated from each other)	-	-
4.3.1( The outer stitch)	-	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	-
4.3.1(The number of stitches/dm)	-	-
4.3.2(Mouth)	-	-
4.4 and Table 1 i(Capacity)	-	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	-
5.2 and Table 1 iii(Ends per dm )	-	-
5.2 and Table 1 iv(Picks per dm )	-	-
5.1 and Table 1 v(Mass of sack )	-	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	-
5.2 and Table 1 x(Ash content )	-	-
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	-

30 Jun, 2028

-
-

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

11650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Raw Material)	-	3300	OK
3.2(Tapes – Width )	-	250	OK
3.2(Tapes – Linear Density )	-	0	OK
3.3(Tying Cord)	-	250	OK
3.3(Tying Cord)	-	0	OK
3.3(Tying Cord)	-	0	OK
3.4(Sack)	-	300	OK
3.4.1(Seam)	-	275	OK
3.4.1(Seam)	-	0	OK
3.4.1(Seam)	-	0	OK
3.4.1(Seam)	-	0	OK
4.1 and Table 1 i a(Dimensions Outside Length)	-	500	OK
4.1 and Table 1 i b(Dimensions Outside Width)	-	0	OK
4.1 and Table 1 ii(Ends per dm )	-	550	OK
4.1 and Table 1 iii(Picks per dm )	-	0	OK
4.2 and Table 1 iv(Mass of sack )	-	300	OK
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	350	OK
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	0	OK
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	350	OK
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	350	OK
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	0	OK
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	350	OK
4.1 and Table 1 ix(Ash content )	-	300	OK
3.1(Raw Material)	-	0	-
3.2(Tapes – Width )	-	0	-
3.2(Tapes – Linear Density )	-	0	-
3.3(Tying Cord)	-	0	-
3.3(Tying Cord)	-	0	-
3.3(Tying Cord)	-	0	-
3.4(Sack)	-	0	-
3.4.1(Seam)	-	0	-
3.4.1(Seam)	-	0	-
3.4.1(Seam)	-	0	-
3.4.1(Seam)	-	0	-
4.1 and Table 1 i a(Dimensions Outside Length)	-	0	-
4.1 and Table 1 i b(Dimensions Outside Width)	-	0	-
4.1 and Table 1 ii(Ends per dm )	-	0	-
4.1 and Table 1 iii(Picks per dm )	-	0	-
4.2 and Table 1 iv(Mass of sack )	-	0	-
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	0	-
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	0	-
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	0	-
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	0	-
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	0	-
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
4.1 and Table 1 ix(Ash content )	-	0	-
3.2 (Mesh size and weight is g/cm2) (amendment 3)(Mesh size and weight is g/cm2)	-	0	-

30 Jun, 2028

-
-

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

11550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	250	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	275	-
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	275	-
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	350	-
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	275	-
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	3600	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	500	-
3.2(Unlaminated Fabric Mass )	-	300	-
3.3.1(Bottom seam (IS 10789))	-	350	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	300	-
4.2 and Table 1 ii(Dimensions )	-	500	-
5.2 and Table 1 iii(Ends per dm )	-	275	-
5.2 and Table 1 iv(Picks per dm )	-	0	-
4.2 and Table 1 v(Mass of sack )	-	300	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	350	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	350	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	350	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	350	-
4.2 and Table 1 x(Ash content )	-	0	-
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	0	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	0	-
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	0	-
3.2(Unlaminated Fabric Mass )	-	0	-
3.3.1(Bottom seam (IS 10789))	-	0	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	0	-
4.2 and Table 1 ii(Dimensions )	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	0	-
5.2 and Table 1 iv(Picks per dm )	-	275	-
4.2 and Table 1 v(Mass of sack )	-	0	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	0	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	0	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	0	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
4.2 and Table 1 x(Ash content )	-	300	-
3.1(Material Identification)	-	0	-
3.1(Overall Migration)	-	0	-
3.2(Density)	-	0	-
3.2(MFI)	-	0	-
Cl 3.2 (Mesh size)(Mesh size)	-	0	-
Cl 3.2 (Weight in g/m2) (Amendment 3)(Weight in g/m2)	-	0	-
3.3.2(Mouth)	-	0	-

30 Jun, 2028

-
-

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

13050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	OK
4.1(Raw Material)	-	3300	OK
4.2(Tapes – Width IS 6192 and IS 11197)	-	0	OK
4.2(Tapes – Linear Density )	-	0	-
4.2(Construction)	-	0	OK
4.3(Sacks)	-	0	OK
4.3.1(Bottom Seam)	-	0	-
4.3.1(The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4(Liner IS 10146 or IS 10910.)	-	0	-
4.4(Mass of the loose liner )	-	0	-
4.4(Width of the loose liner)	-	0	-
4.4(Length of the line)	-	0	-
4.4(Bottom seam of the loose liner)	-	0	-
4.4.1(Liner)	-	0	-
4.5 and Table 1 i(Capacity)	-	0	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	0	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	0	-
5.2 and Table 1 iv(Picks per dm )	-	0	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	0	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	0	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	0	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
5.2 and Table 1 x(Ash content )	-	0	-
3(TYPES)	-	0	-
4.1(Raw Material)	-	0	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	0	-
4.2(Tapes – Linear Density )	-	0	-
4.2(Construction)	-	0	-
4.3(Sacks)	-	0	-
4.3.1(Bottom Seam)	-	0	-
4.3.1(The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4(Liner IS 10146 or IS 10910.)	-	0	-
4.4(Mass of the loose liner )	-	0	-
4.4(Width of the loose liner)	-	0	-
4.4(Length of the line)	-	0	-
4.4(Bottom seam of the loose liner)	-	0	-
4.4.1(Liner)	-	0	-
4.5 and Table 1 i(Capacity)	-	0	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	0	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	0	-
5.2 and Table 1 iv(Picks per dm )	-	0	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	0	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	0	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	0	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
5.2 and Table 1 x(Ash content )	-	0	-
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	0	-
5.3(UV Resistance)	-	0	-
Cl-4.4 (Amendment-3)(Thickness of liner)	-	0	-

30 Jun, 2028

-
-

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

5760 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Appearance)	-	0	-
5.1.2(Film Form)	-	0	-
5.1.3(Odour)	-	0	-
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	0	-
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	0	-
5.1.6a(Carbon Black Content, Annex-A)	-	250	OK
5.1.6b(Ash Content, Annex-A)	-	300	OK
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	0	-
5.2.2(Tolerance on Thickness, Annex-A)	-	0	-
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	0	-
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	0	-
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	0	-
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	0	-
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	0	-
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	0	-
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	0	-
6.1, Table 1(Tear resistence. B) Transverse direction )	-	0	-
7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) )	-	0	-
7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) )	-	0	-
7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	0	-
7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) )	-	0	-
7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) )	-	0	-
7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) )	-	0	-
8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	-
8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	-
8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	-
8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	-
8.1, Table 3(Tear resistance , Annex B)	-	0	-
8.1, Table 3(Puncture resistance , Annex C)	-	0	-
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	-
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	-
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	-
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	-
9.1, Table 4(Tear resistance , Annex B)	-	0	-
9.1, Table 4(Puncture resistance , Annex C)	-	0	-
Clause 9.1 (Table 4)(Break Elongation)	-	0	-
Clause 9.1 (Table 4)(Yield Elonation)	-	0	-
Clause 9.1 (Table 4)(Break strength)	-	0	-
Clause 9.1 (Table 4)(Yield strength)	-	0	-
Clause 8.1(Table 3)(Break Elongation)	-	0	-
Clause 8.1(Table 3)(Break strength)	-	0	-
Clause 7.1(Table 2)(Dart Impact Strength)	-	0	-
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Transverse Direction))	-	0	-
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Machine Direction))	-	0	-
Clause 6.1(Table 1)(Decrease in Tensile Strength after Ageing(Transverse Direction))	-	0	-
Clause 6.1(Table 1)(Decrease in Tensile Strength after Ageing(Machine Direction))	-	0	-
Clause 5.2.3(Tolerance on Width)	-	0	-
Cl.5.1.6(a)(Carbon Black Content)	-	0	-
Cl.5.1.6(b)(Ash content)	-	0	-
Cl.5.1.6(c)(Dispersion of Carbon Black)	-	0	-
5.2.1.1(Nominal Thickness)	-	0	-
5.2.1.2(Nominal width)	-	0	-

30 Jun, 2028

-
-

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

7325 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (Linear Density, 900 denier)	-	7325	OK
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	-
4.5(Lamination )	-	0	-
4.7(There shall be a double fold at the top seam and)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.1(Raw Material )	-	0	-
4.5(Lamination )	-	0	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	-
4.2 (Fabric)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	-
4.4(Seam )	-	0	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	-
5/5.6 (UV Resistance, )	-	0	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	0	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0	-

30 Jun, 2028

-
-

IS 16058 (2024)

Dunnage pallets made from recycled packaging wastes for warehousing application - Specification (First Revision)

43306.00 View breakup
-

Clause No.	Exclusion	Remark
Cl-8.1.1(Nails)	-	-
Cl-8.1.2(Threaded Nail)	-	-
Cl-8.1.3(Ring Nail)	-	-
Cl-8.1.4(Interrupted Thread Nail)	-	-
Cl-8.1.5(Collated Nail)	-	-
Cl-8.1.6(Screw)	-	-
Cl-8.2(Requirements for Fasteners)	-	-
Cl-11.1(Dimensions of Pallet Type “A-1”)	-	-
Cl-11.1.1(Dimensions of Top Plank of Pallet Type “A-1”)	-	-
Cl-11.2(Dimensions of Pallet Type “A-2”)	-	-
Cl-11.2.1(Dimensions of Top Plank of Pallet Type “A-2”)	-	-
Cl-11.3(Dimensions of Pallet Type “B”)	-	-
Cl-11.3.1(Dimensions of Top Plank of Pallet Type “B”)	-	-
Cl-11.3.2(Dimensions of Bottom Support Plank of Pallet Type “B”)	-	-
Cl-12(Workmanship)	-	-
Cl-13(Finish)	-	-
Cl-15.1(Stacking Test Using Static Load)	-	-
Cl-15.2(Vertical Impact Drop Test)	-	-
Cl-15.3(Corner Drop Test)	-	-
Cl-15.4(Hammer Test)	-	-
Cl-15.5(Load Bearing Test)	-	-
Cl-16(Routine Tests)	-	-
Cl-17.1 (i)(Density (kg/m³))	-	-
Cl-17.2 (ii)(Tensile stress at proportional limits (kg/cm2))	-	-
Cl-17.2 (iii)(Tensile stress at maximum load (kg/cm2))	-	-
Cl-17.2 (iv)(Modulus of elasticity in tension parallel to grain (kg/cm²))	-	-
Cl-17.2 (v)(F alling impact strength, minimum height of fall (cm))	-	-
Cl-17.2 (vi)(Compression parallel to surface test (Min), (kg/cm²))	-	-
Cl-17.3 (i)(Moisture (percent, Max))	-	-
Cl-17.3 (ii)(Water absorption 2 h (percent, Max))	-	-
Cl-17.3 (iii)(Water absorption 24 h (percent, Max))	-	-
Cl-17.3 (iv)(Acidity and alkalinity resistance test)	-	-
Cl-20(Marking)	-	-
Cl-8.1.1(Nails)	-	-
Cl-8.1.2(Threaded Nail)	-	-
Cl-8.1.3(Ring Nail)	-	-
Cl-8.1.4(Interrupted Thread Nail)	-	-
Cl-8.1.5(Collated Nail)	-	-
Cl-8.1.6(Screw)	-	-
Cl-8.2(Requirements for Fasteners)	-	-
Cl-11.1(Dimensions of Pallet Type “A-1”)	-	-
Cl-11.1.1(Dimensions of Top Plank of Pallet Type “A-1”)	-	-
Cl-11.2(Dimensions of Pallet Type “A-2”)	-	-
Cl-11.2.1(Dimensions of Top Plank of Pallet Type “A-2”)	-	-
Cl-11.3(Dimensions of Pallet Type “B”)	-	-
Cl-11.3.1(Dimensions of Top Plank of Pallet Type “B”)	-	-
Cl-11.3.2(Dimensions of Bottom Support Plank of Pallet Type “B”)	-	-
Cl-12(Workmanship)	-	-
Cl-13(Finish)	-	-
Cl-15.1(Stacking Test Using Static Load)	-	-
Cl-15.2(Vertical Impact Drop Test)	-	-
Cl-15.3(Corner Drop Test)	-	-
Cl-15.4(Hammer Test)	-	-
Cl-15.5(Load Bearing Test)	-	-
Cl-16(Routine Tests)	-	-
Cl-17.1 (i)(Density (kg/m³))	-	-
Cl-17.2 (ii)(Tensile stress at proportional limits (kg/cm2))	-	-
Cl-17.2 (iii)(Tensile stress at maximum load (kg/cm2))	-	-
Cl-17.2 (iv)(Modulus of elasticity in tension parallel to grain (kg/cm²))	-	-
Cl-17.2 (v)(F alling impact strength, minimum height of fall (cm))	-	-
Cl-17.2 (vi)(Compression parallel to surface test (Min), (kg/cm²))	-	-
Cl-17.3 (i)(Moisture (percent, Max))	-	-
Cl-17.3 (ii)(Water absorption 2 h (percent, Max))	-	-
Cl-17.3 (iii)(Water absorption 24 h (percent, Max))	-	-
Cl-17.3 (iv)(Acidity and alkalinity resistance test)	-	-
Cl-20(Marking)	-	-
14(Conditioning)	-	-
Cl-8.1.1(Nails)	-	-
Cl-8.1.2(Threaded Nail)	-	-
Cl-8.1.3(Ring Nail)	-	-
Cl-8.1.4(Interrupted Thread Nail)	-	-
Cl-8.1.5(Collated Nail)	-	-
Cl-8.1.6(Screw)	-	-
Cl-8.2(Requirements for Fasteners)	-	-
Cl-11.1(Dimensions of Pallet Type “A-1”)	-	-
Cl-11.1.1(Dimensions of Top Plank of Pallet Type “A-1”)	-	-
Cl-11.2(Dimensions of Pallet Type “A-2”)	-	-
Cl-11.2.1(Dimensions of Top Plank of Pallet Type “A-2”)	-	-
Cl-11.3(Dimensions of Pallet Type “B”)	-	-
Cl-11.3.1(Dimensions of Top Plank of Pallet Type “B”)	-	-
Cl-11.3.2(Dimensions of Bottom Support Plank of Pallet Type “B”)	-	-
Cl-12(Workmanship)	-	-
Cl-13(Finish)	-	-
Cl-15.1(Stacking Test Using Static Load)	-	-
Cl-15.2(Vertical Impact Drop Test)	-	-
Cl-15.3(Corner Drop Test)	-	-
Cl-15.4(Hammer Test)	-	-
Cl-15.5(Load Bearing Test)	-	-
Cl-16(Routine Tests)	-	-
Cl-17.1 (i)(Density (kg/m³))	-	-
Cl-17.2 (ii)(Tensile stress at proportional limits (kg/cm2))	-	-
Cl-17.2 (iii)(Tensile stress at maximum load (kg/cm2))	-	-
Cl-17.2 (iv)(Modulus of elasticity in tension parallel to grain (kg/cm²))	-	-
Cl-17.2 (v)(F alling impact strength, minimum height of fall (cm))	-	-
Cl-17.2 (vi)(Compression parallel to surface test (Min), (kg/cm²))	-	-
Cl-17.3 (i)(Moisture (percent, Max))	-	-
Cl-17.3 (ii)(Water absorption 2 h (percent, Max))	-	-
Cl-17.3 (iii)(Water absorption 24 h (percent, Max))	-	-
Cl-17.3 (iv)(Acidity and alkalinity resistance test)	-	-
Cl-20(Marking)	-	-
14(Conditioning)	-	-

30 Jun, 2028

-
Included w.e.f 29.07.2025

IS 17427 (2020)

Wooden ( Timber ) Pallets for Packaging, Storage and Transportation ” Specification

20400 View breakup
-

Clause No.	Exclusion	Remark
4.1(CLASSIFICATION OF PALLETS)	-	-
6.1(Limitation of Timber Defects for Nonexpandable Pallet-Cross grains(Grade-1))	-	-
6.1(a)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number(Grade-1))	-	-
6.1(b)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number(Grade-1))	-	-
6.1(c)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number(Grade-1))	-	-
6.1(d)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number(Grade-1))	-	-
6.1(Limitation of Timber Defects for Nonexpandable Pallet-Checks(Grade-1))	-	-
6.1("Limitation of Timber Defects for Nonexpandable Pallet-Splits and shakes (sizes, location and number)(Grade-1)")	-	-
6.1(Limitation of Timber Defects for Nonexpandable Pallet-Warp(Grade-1))	-	-
6.1("Limitation of Timber Defects for Nonexpandable Pallet-Wane (size, location and number)(Grade-1)")	-	-
6.1(Limitation of Timber Defects for Nonexpandable Pallet-Decay(Grade-1))	-	-
6.1(Limitation of Timber Defects for Nonexpandable Pallet-Stain(Grade-1))	-	-
6.1(Limitation of Timber Defects for Nonexpandable Pallet-Moisture Containt(Grade-1))	-	-
6.1(Limitation of Timber Defects for Nonexpandable Pallet-Cross grains(Grade-2))	-	-
6.1(a)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number)(Grade-2))	-	-
6.1(b)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number)(Grade-2))	-	-
6.1(c)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number)(Grade-2))	-	-
6.1(d)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number)(Grade-2))	-	-
6.2(Limitation of Timber defects for Expandable pallets)	-	-
6.3(Limitation of Timber Defects for Nonexpandable Pallet-Checks(Grade-2))	-	-
6.3(Limitation of Timber Defects for Nonexpandable Pallet-Splits and shakes (sizes, location and number)(Grade-2))	-	-
6.3(Limitation of Timber Defects for Nonexpandable Pallet-Warp(Grade-2))	-	-
6.3("Limitation of Timber Defects for Nonexpandable Pallet-Wane (size, location and number)(Grade-2)")	-	-
6.3(Limitation of Timber Defects for Nonexpandable Pallet-Decay(Grade-2))	-	-
6.3(Limitation of Timber Defects for Nonexpandable Pallet-Stain(Grade-2))	-	-
6.3(Limitation of Timber defects for Expandable pallets-Dimensions of components)	-	-
6.3(Limitation of Timber defects for Expandable pallets-Surfacing)	-	-
6.3(Limitation of Timber defects for Expandable pallets-Skip dressing)	-	-
6.3(Limitation of Timber defects for Expandable pallets-Cross cutting)	-	-
6.3(Limitation of Timber defects for Expandable pallets-Deckboard spacing)	-	-
6.3("Limitation of Timber defects for Expandable pallets-Parallelism of deviation deck boards ")	-	-
6.3(Limitation of Timber defects for Expandable pallets-Fastener splits)	-	-
6.3(Limitation of Timber defects for Expandable pallets-Protruding fastener heads and points)	-	-
6.3(Limitation of Timber defects for Expandable pallets-Dimensions of assembled pallet)	-	-
6.4("Workmanship for Non-Expandable Wooden Palletsd-Defects-Dimensions of components(Grade 1)")	-	-
6.4(Workmanship for Non-Expandable Wooden Palletsd-Defects-Surfacing (Grade 1))	-	-
6.4(Workmanship for Non-Expandable Wooden Palletsd-Defects-Skip dressing(Grade 1))	-	-
6.4(Workmanship for Non-Expandable Wooden Palletsd-Defects-Cross cutting(Grade 1))	-	-
6.4("Workmanship for Non-Expandable Wooden Palletsd-Defects-Deckboard spacing(Grade 1)")	-	-
6.4("Workmanship for Non-Expandable Wooden Palletsd-Defects-Parallelism of deckboards(Grade 1)")	-	-
6.4("Workmanship for Non-Expandable Wooden Palletsd-Defects-Dimensions of components(Grade 2)")	-	-
6.4(Workmanship for Non-Expandable Wooden Palletsd-Defects-Surfacing (Grade 2))	-	-
6.4(Workmanship for Non-Expandable Wooden Palletsd-Defects-Surfacing (Grade 2))	-	-
6.4(Workmanship for Non-Expandable Wooden Palletsd-Defects-Skip dressing(Grade 2))	-	-
6.4(Workmanship for Non-Expandable Wooden Palletsd-Defects-Cross cutting(Grade 2))	-	-
6.4("Workmanship for Non-Expandable Wooden Palletsd-Defects-Deckboard spacing(Grade 2)")	-	-
6.4("Workmanship for Non-Expandable Wooden Palletsd-Defects-Parallelism of deckboards(Grade 2)")	-	-
8(FASTENERS)	-	-
8(FASTENERS)	-	-
8(FASTENERS)	-	-
8(FASTENERS)	-	-
8(FASTENERS)	-	-
8(FASTENERS)	-	-
8(FASTENERS)	-	-
9.1(Number of driven fasteners-Deckbord (width< 130))	-	-
9.1(Number of driven fasteners-Deckbord (width 313 to 175))	-	-
9.1(Number of driven fasteners-Deckbord (width 176 to 200))	-	-
9.1(Number of driven fasteners-Comer block)	-	-
9.1(Number of driven fasteners-Interior block)	-	-
9.2(Fastener Placement)	-	-
9.2(Fastener Placement)	-	-
9.2(Fastener Placement)	-	-
9.2(Fastener Placement)	-	-
9.2(Fastener Placement)	-	-
9.2(Fastener Placement)	-	-
9.3(Clinching Points of Driven Fasteners)	-	-
9.4(Fasteners-caused Splits)	-	-
9.5(Protruding Fasteners)	-	-
9.5(Protruding Fasteners)	-	-
9.5(Protruding Fasteners)	-	-
9.5(Protruding Fasteners)	-	-
10(DIMENSIONS OF PALLETS-Length)	-	-
10(DIMENSIONS OF PALLETS-Width)	-	-
10(DIMENSIONS OF PALLETS-Height)	-	-
10.1(Dimensions of Wings(1200 ×1800 mm pallet))	-	-
10.1(Dimensions of Wings (other size of pallets))	-	-
10.2(Height of the Pallet and Height of Loaded Pallet)	-	-
10.2(Height of the Pallet and Height of Loaded Pallet)	-	-
10.3(Height of Pallet with Cargo Loading)	-	-
10.3(Height of Pallet with Cargo Loading)	-	-
10.1.1(CONSTRUCTION AND DESIGN OF PALLETS-Single-deck Pallet (Recommended for Dunnage))	-	-
10.1.2(CONSTRUCTION AND DESIGN OF PALLETS-Double-deck Pallet)	-	-
10.1.3(CONSTRUCTION AND DESIGN OF PALLETS-Reversible Pallet)	-	-
10.1.4(CONSTRUCTION AND DESIGN OF PALLETS-Non-reversible Pallet)	-	-
10.1.5(CONSTRUCTION AND DESIGN OF PALLETS-Two-way Pallet)	-	-
10.1.6(CONSTRUCTION AND DESIGN OF PALLETS-Four-way Pallet)	-	-
10.1.7(CONSTRUCTION AND DESIGN OF PALLETS-Overlap pallet)	-	-
10.1.8(CONSTRUCTION AND DESIGN OF PALLETS-Wing)	-	-
10.1.9(CONSTRUCTION AND DESIGN OF PALLETS- Notched Stringer Pallet)	-	-
10.1.10("CONSTRUCTION AND DESIGN OF PALLETS-Perimeter-base Pallet ")	-	-
13(1)(Stacking test (Static load)-Stacking)	-	-
13(2)-a(Bending test (Stiffness Flexural strength)-Racking)	-	-
13(2)-b(Bending test (Stiffness Flexural strength)-Racking)	-	-
13(3)(Bottom deck test (Stiffness and Flexural strength of the bottom deck boards between support points)-Racking)	-	-
13(4)(Inclined impact plane test(Shear test)-Distortion resistance)	-	-
13(5)-a(Incline plane test (Leading edge impact test)-Resistance to fork arm)	-	-
13(5)-b(Incline plane test (Leading edge impact test)-Resistance to fork arm)	-	-
13(6)(Incline plane test (Block impact test)-Resistance to fork tip)	-	-
13(7)(Corner drop test-Resistance to Impact)	-	-
13(8)(Compression test-Any activity that compresses blocks or stringers including stacking)	-	-
13(9)(Fork Lifting test-Lifting with forklift and pallet trucks.)	-	-

30 Jun, 2028

-
Included w.e.f 20.06.2025

IS 14490 (2024)

Plain Copier Paper â Specification (Second Revision)

Plain Copier Paper

10200 View breakup
-

Clause No.	Exclusion	Remark
5.1.1(plain copier paper)	-	-
5.3(Grammage (Substance))	-	-
5.4(Thickness)	-	-
5.5(Size)	-	-
5.6, Table 1, i(ISO brightness, percent, Min)	-	-
5.6, Table 1, ii(Opacity, percent, Min)	-	-
5.6, Table 1, iii(One minute cobb test, both sides, g/m2 , Max)	-	-
5.6, Table 1, iv(Surface strength, Dennison (Wax Pick))	-	-
5.6, Table 1, v(Smoothness for both sides (Bendsten), ml/min, Max)	-	-
5.6, Table 1, vi(Ash content (at 900 °C), percent by mass, Max)	-	-
5.6, Table 1, vii(Taber stiffness, Min:)	-	-
5.6, Table 1, viii(Tear Index, mN.m2 /g, Min:)	-	-
5.6, Table 1, ix(Tensile index, N.m/g, Min:)	-	-
5.1.2(k,)	-	-
5.2(0)	-	-
5.8(Additional Requirements for Eco-Mark)	-	-
5.7(Conditioning)	-	-
6(PACKING AND MARKING)	-	-

30 Jun, 2028

-
Included w.e.f 27.03.2025

IS 12766 (2023)

COMPUTER PAPER - SPECIFICATION

13800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1.1(Continuous Length)	-	550	-
Clause 4.1(Paper Description)	-	550	-
Clause 4.1.1(Grammage (Substance))	-	500	-
Clause 4.1.2(Printing)	-	550	-
Clause 4.2(Z-fold)	-	550	-
Clause 4.3(Perforation)	-	550	-
Feed hole diameter(As per Annex A)	-	550	-
Clause 4.4(Feed hole to feed hole disance)	-	550	-
Clause 4.4(Distance of Feed hole centre from the edge of the paper)	-	550	-
Clause 4.5(Size)	-	550	-
Clause 4.7, Table 1, s.no. (i)(As per IS 1060 (Part 5/Sec 3))	-	500	-
Clause 4.7, Table 1, s.no. (ii)(Tensile index, CD)	-	900	-
Clause 4.7, Table 1, s.no. (ii)(Tensile index, MD)	-	900	-
Clause 4.7, Table 1, s.no. (iii)(Tear index, MD)	-	900	-
Clause 4.7, Table 1, s.no. (iii)(Tear index, CD)	-	900	-
Clause 4.7, Table 1, s.no. (iv)(Burst Index)	-	550	-
One minute Cobb test(As per IS 1060 (Part 5/Sec 4))	-	600	-
Brightness ISO(Brightness ISO)	-	700	-
Clause 4.7, Table 1, s.no. (vii)(Opacity)	-	700	-
Clause 4.7, Table 1, s.no. (viii)(Moisture)	-	550	-
Clause 4.7, Table 1, s.no. (ix)(Ash)	-	600	-
Clause 4.7, Table 1, s.no. (x)(Smoothness (Bendtsen) for both sides)	-	550	-
Clause 3.1.1(Continuous Length)	-	0	-
Clause 4.1(Paper Description)	-	0	-
Clause 4.1.1(Grammage (Substance))	-	0	-
Clause 4.1.2(Printing)	-	0	-
Clause 4.2(Z-fold)	-	0	-
Clause 4.3(Perforation)	-	0	-
Feed hole diameter(As per Annex A)	-	0	-
Clause 4.4(Feed hole to feed hole disance)	-	0	-
Clause 4.4(Distance of Feed hole centre from the edge of the paper)	-	0	-
Clause 4.5(Size)	-	0	-
Clause 4.7, Table 1, s.no. (i)(As per IS 1060 (Part 5/Sec 3))	-	0	-
Clause 4.7, Table 1, s.no. (ii)(Tensile index, CD)	-	0	-
Clause 4.7, Table 1, s.no. (ii)(Tensile index, MD)	-	0	-
Clause 4.7, Table 1, s.no. (iii)(Tear index, MD)	-	0	-
Clause 4.7, Table 1, s.no. (iii)(Tear index, CD)	-	0	-
Clause 4.7, Table 1, s.no. (iv)(Burst Index)	-	0	-
One minute Cobb test(As per IS 1060 (Part 5/Sec 4))	-	0	-
Brightness ISO(Brightness ISO)	-	0	-
Clause 4.7, Table 1, s.no. (vii)(Opacity)	-	0	-
Clause 4.7, Table 1, s.no. (viii)(Moisture)	-	0	-
Clause 4.7, Table 1, s.no. (ix)(Ash)	-	0	-
Clause 4.7, Table 1, s.no. (x)(Smoothness (Bendtsen) for both sides)	-	0	-
Clause 3.1.1(Continuous Length)	-	0	-
Clause 4.1(Paper Description)	-	0	-
Clause 4.1.1(Grammage (Substance))	-	0	-
Clause 4.1.2(Printing)	-	0	-
Clause 4.2(Z-fold)	-	0	-
Clause 4.3(Perforation)	-	0	-
Feed hole diameter(As per Annex A)	-	0	-
Clause 4.4(Feed hole to feed hole disance)	-	0	-
Clause 4.4(Distance of Feed hole centre from the edge of the paper)	-	0	-
Clause 4.5(Size)	-	0	-
Clause 4.7, Table 1, s.no. (i)(As per IS 1060 (Part 5/Sec 3))	-	0	-
Clause 4.7, Table 1, s.no. (ii)(Tensile index, CD)	-	0	-
Clause 4.7, Table 1, s.no. (ii)(Tensile index, MD)	-	0	-
Clause 4.7, Table 1, s.no. (iii)(Tear index, MD)	-	0	-
Clause 4.7, Table 1, s.no. (iii)(Tear index, CD)	-	0	-
Clause 4.7, Table 1, s.no. (iv)(Burst Index)	-	0	-
One minute Cobb test(As per IS 1060 (Part 5/Sec 4))	-	0	-
Brightness ISO(Brightness ISO)	-	0	-
Clause 4.7, Table 1, s.no. (vii)(Opacity)	-	0	-
Clause 4.7, Table 1, s.no. (viii)(Moisture)	-	0	-
Clause 4.7, Table 1, s.no. (ix)(Ash)	-	0	-
Clause 4.7, Table 1, s.no. (x)(Smoothness (Bendtsen) for both sides)	-	0	-
Clause 3.1.1(Continuous Length)	-	0	-
Clause 4.1(Paper Description)	-	0	-
Clause 4.1.1(Grammage (Substance))	-	0	-
Clause 4.1.2(Printing)	-	0	-
Clause 4.2(Z-fold)	-	0	-
Clause 4.3(Perforation)	-	0	-
Feed hole diameter(As per Annex A)	-	0	-
Clause 4.4(Feed hole to feed hole disance)	-	0	-
Clause 4.4(Distance of Feed hole centre from the edge of the paper)	-	0	-
Clause 4.5(Size)	-	0	-
Clause 4.7, Table 1, s.no. (i)(As per IS 1060 (Part 5/Sec 3))	-	0	-
Clause 4.7, Table 1, s.no. (ii)(Tensile index, CD)	-	0	-
Clause 4.7, Table 1, s.no. (ii)(Tensile index, MD)	-	0	-
Clause 4.7, Table 1, s.no. (iii)(Tear index, MD)	-	0	-
Clause 4.7, Table 1, s.no. (iii)(Tear index, CD)	-	0	-
Clause 4.7, Table 1, s.no. (iv)(Burst Index)	-	0	-
One minute Cobb test(As per IS 1060 (Part 5/Sec 4))	-	0	-
Brightness ISO(Brightness ISO)	-	0	-
Clause 4.7, Table 1, s.no. (vii)(Opacity)	-	0	-
Clause 4.7, Table 1, s.no. (viii)(Moisture)	-	0	-
Clause 4.7, Table 1, s.no. (ix)(Ash)	-	0	-
Clause 4.7, Table 1, s.no. (x)(Smoothness (Bendtsen) for both sides)	-	0	-
Clause 3.1.1(Continuous Length)	-	0	-
Clause 4.1(Paper Description)	-	0	-
Clause 4.1.1(Grammage (Substance))	-	0	-
Clause 4.1.2(Printing)	-	0	-
Clause 4.2(Z-fold)	-	0	-
Clause 4.3(Perforation)	-	0	-
Feed hole diameter(As per Annex A)	-	0	-
Clause 4.4(Feed hole to feed hole disance)	-	0	-
Clause 4.4(Distance of Feed hole centre from the edge of the paper)	-	0	-
Clause 4.5(Size)	-	0	-
Clause 4.7, Table 1, s.no. (i)(As per IS 1060 (Part 5/Sec 3))	-	0	-
Clause 4.7, Table 1, s.no. (ii)(Tensile index, CD)	-	0	-
Clause 4.7, Table 1, s.no. (ii)(Tensile index, MD)	-	0	-
Clause 4.7, Table 1, s.no. (iii)(Tear index, MD)	-	0	-
Clause 4.7, Table 1, s.no. (iii)(Tear index, CD)	-	0	-
Clause 4.7, Table 1, s.no. (iv)(Burst Index)	-	0	-
One minute Cobb test(As per IS 1060 (Part 5/Sec 4))	-	0	-
Brightness ISO(Brightness ISO)	-	0	-
Clause 4.7, Table 1, s.no. (vii)(Opacity)	-	0	-
Clause 4.7, Table 1, s.no. (viii)(Moisture)	-	0	-
Clause 4.7, Table 1, s.no. (ix)(Ash)	-	0	-
Clause 4.7, Table 1, s.no. (x)(Smoothness (Bendtsen) for both sides)	-	0	-

30 Jun, 2028

-
Included w.e.f. 06.12.2024

IS 1848 : Part 2 (2018)

Writing and printing papers - Specification: Part 2 air mail/manifold, cartridge drawing and cartridge white, duplicating absorbent and duplicating semi - Absorbent and poster machine glazed types (Fifth Revision)

8550 View breakup
Air mail/Manifold : Rs. 8,550/-; Cartridge (Drawing) : Rs. 8,550/-; Cartridge (White) : RS. 8,550/-; Duplicating absorbent : RS. 8,550/-; Duplicating semi-absorbent : RS. 8,550/-; Poster(machine glazed) : Rs. 8,550/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	500	-
4.1(Mechanical pulp for furnish)	-	500	-
4.2(Substance)	-	500	-
4.3(Thickness)	-	500	-
4.5(pH)	-	550	-
4.6 Table 1 (Double Fold CD)	-	300	-
4.6 Table 1 (Double Fold MD)	-	300	-
4.6 Table 1 (Brightness)	-	700	-
4.6 Table 1 (Opacity)	-	700	-
4.6 Table 1 (One Minute Cobb Test)	-	600	-
4.6 Table 1 (Gloss)	-	700	-
4.6 Table 1 (Smoothness)	-	550	-
4.6 Table 1 (Tear Index CD)	-	350	-
4.6 Table 1(Tear Index MD)	-	350	-
4.8.2 (pulp made from materials other than bamboo, hardwoods, softwoods and reed.)	-	0	-
4.8.2(Recycled paper and paper board must be made from waste paper.)	-	0	-

30 Jun, 2028

-
-

IS 1848 : Part 1 (2018)

Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision)

10100 View breakup
Account Book : Rs. 10,100/-; Azure laid : Rs7,700/-; Bond : Rs. 9,000/-; Cream laid and Cream wove : Rs. 9,500/-; Printing (Colored) : Rs. 7,850/-; Printing (Map litho) : Rs. 10,100/-; Printing (Offset) : Rs. 7,700/-; Printing (White) : Rs. 8,400/- ; Printing (White super calendared) : Rs. 8,550/-; Type-writing : Rs. 7,700/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.5(pH)	-	550	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Brightness ISO, Account book)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-CD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-MD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Opacity, Account book)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-CD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-MD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Wax pick, Account book)	-	1100	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Smoothness(Bendtsen),Account book)	-	550	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-CD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-MD)	-	350	-
Cl.4.2(Substance, Ref IS 1763)	-	500	-
Cl. 4.4(Size and tolerance on size)	-	500	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(One minute cobb test, Account book)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Gloss, Account book)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-CD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-CD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-MD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Brightness ISO, Azure laid)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Opacity,Azure laid)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(One minute cobb test, Azure laid)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-CD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-MD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Gloss, Azure laid)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Wax pick, Azure laid)	-	1100	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Smoothness(Bendtsen),Azure laid)	-	550	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-MD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-CD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-MD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Brightness ISO, Bond)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Opacity, Bond)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(One minute cobb test, Bond)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-CD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-MD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Gloss, Bond)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Wax pick, Bond)	-	1100	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Smoothness(Bendtsen),Bond)	-	550	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-CD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-MD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Brightness ISO, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Opacity, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(One minute cobb test, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Gloss, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Wax pick, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1100	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Smoothness bendtsen, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	550	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-CD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-MD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Brightness ISO, Printing Maplitho)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Opacity, Printing Maplitho)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(One minute cobb test, Printing Maplitho)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-CD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-MD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Wax pick, Printing Maplitho)	-	1100	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-CD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-MD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-CD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Brightness ISO, Printing White Super Calendered)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Opacity, Printing White Super Calendered)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(One minute cobb test, Printing White Super Calendered)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-CD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-MD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Gloss, Printing White Super Calendered)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Wax pick, Printing White Super Calendered)	-	1100	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Smoothness bendtsen, Printing White Super Calendered)	-	550	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-CD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-MD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Typewriting-CD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tensile index, Typewriting-MD)	-	450	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Brightness ISO, Typewriting)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Opacity, Typewriting)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(One minute cobb test, Typewriting)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-CD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-MD)	-	300	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Gloss, Typewriting)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Wax pick, Typewriting)	-	1100	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Smoothness bendtsen, Typewriting)	-	550	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-CD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-MD)	-	350	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-CD)	-	0	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-MD)	-	0	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Brightness ISO, Bond)	-	0	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Opacity, Bond)	-	0	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(One minute cobb test, Bond)	-	0	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-CD)	-	0	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-MD)	-	0	-

30 Jun, 2028

-
-

IS 9055 (1979)

Specification for one time carbon paper

3650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	550	-
4.2(Carbon Work)	-	550	-
4.3(Base paper)	-	550	-
4.4(Size)	-	500	-
4.5, Table-1, iii)(Manifolding (minimum no. of copies))	-	500	-
4.5, Table-1, i)(Substance of base paper, g/m2)	-	500	-
4.5, Table-1, i)(Coating, g/m2)	-	500	-

30 Jun, 2028

-
-

IS 10212 : Part 1 (1986)

General requirements of packages for explosives: Part 1 coommercial high explosives (First Revision)

Corrugated Fibre Board

10650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 3.4, table 1, Sl no. 1(Drop test IS 7028 (Part 4):1973)	-	2000	-
Cl. No. 3.4, table 1, Sl no. 2(Inclined impact test IS 7028 (Part-3):1973)	-	2000	-
Cl. No. 3.4, table 1, Sl no. 3(Stacking test IS 7028 (Part 1):1973)	-	2000	-
Cl. No. 3.4, table 1, Sl no. 4(Water spary test IS 7028 (Part 8):1974)	-	900	-
Cl.5.3.1, 5.4.1, 5.4.2 - Table 2 - ii)(Water Absorption Cobb/30 min )	-	600	-
Cl.5.3.1, 5.4.1, 5.4.2 - Table 2 - i)(Bursting Strength)	-	550	-

30 Jun, 2028

-
-

IS 1551 (1991)

Carbon papers - Typewriters - Specification (Second Revision)

4400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Grade 1 )	-	0	-
Cl. 4(Grade 2 )	-	0	-
Cl. 4(Grade 3 )	-	0	-
Cl. 4(Grade 4 )	-	0	-
Cl 5.1(Description)	-	0	-
Cl. 5.2(Base Paper)	-	0	-
Cl. 5.2(Base Paper)	-	0	-
Cl. 5.3(Size)	-	1000	-
Cl. 5.4(Carbon Work)	-	0	-
Cl. 5.5(Resistance of Curling, Total length of narrow side in contact with flat surface)	-	550	-
Cl. 5.6 Table 1 S.No. i)(Substance of base paper)	-	500	-
Cl. 5.6 Table 1 S.No. ii)(Coating)	-	600	-
Cl. 5.6 Table 1 S.No. ii)(Durability)	-	700	-
Cl. 5.6 Table 1 S.No. ii)(Manifold)	-	0	-
Cl 6( KEEPING QUALITY)	-	0	-
Cl. 4(GRADES)	-	0	-
Cl. 7.1(Packing)	-	0	-

30 Jun, 2028

-
-

IS 3575 (1993)

Bitumen drums - Specification (Third Revision)

7050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Dimensions Drums (Figure 1))	-	550	-
4.1(Dimensions Drums (Figure 1))	-	550	-
4.1(Dimensions Drums (Figure 1))	-	0	-
4.1(Dimensions Drums (Figure 1))	-	0	-
4.1(Dimensions Drums (Figure 1))	-	0	-
4.1(Dimensions Closure (Figure 2))	-	0	-
4.1(Dimensions Closure (Figure 2))	-	0	-
4.1(Dimensions Closure (Figure 2))	-	0	-
4.1(Dimensions Closure (Figure 2))	-	0	-
5.1(Body and ends)	-	0	-
5.2(Closures)	-	0	-
6.1(Construction)	-	0	-
6.2(Construction)	-	0	-
6.3(Construction)	-	500	-
6.4(Construction)	-	500	-
6.5(Closure)	-	500	-
7.1(Finish)	-	550	-
7.2(Finish)	-	550	-
8(Air Pressure Test)	-	550	-

30 Jun, 2028

-
-

IS 3450 (1994)

Carbon papers - Handwriting - Specification (Second Revision)

3950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Description)	-	0	-
5.2(Base Paper)	-	0	-
5.3(Size)	-	1100	-
5.4(Carbon work)	-	0	-
5.3(Resistance to curling)	-	550	-
Table- 1(i)(Substance of the)	-	500	-
Table- 1(ii)(Coating)	-	600	-
Table- 1(iii)(Durability)	-	700	-
Table- 1(iv)(Manifolding)	-	500	-
6(Keeping quality)	-	0	-
Cl. 6(Keeping Quality)	-	0	-
Cl. 5.6 Table no 3(Durability)	-	0	-

30 Jun, 2028

-
-

IS 10325 (2000)

Square tins - 15 kg/litre for ghee, vanaspati, edible oils and bakery shortenings - Specification (Second Revision)

ALL

7800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Dimensions and Tolerances)	-	500	DISCOUNT
4.2.1.1(Dimensions and Tolerances )	-	550	DISCOUNT
4.1(Dimensions and Tolerances)	-	550	DISCOUNT
4.1(Dimensions and Tolerances)	-	550	DISCOUNT
4.1(Dimensions and Tolerances)	-	550	DISCOUNT
4.2.1(Material)	-	600	DISCOUNT
4.2.1(Material)	-	600	DISCOUNT
4.2.2(Handle)	-	600	DISCOUNT
4.3.1 (Manufacture)	-	550	DISCOUNT
4.3.2(Manufacture)	-	550	DISCOUNT
4.3.3(Manufacture)	-	550	DISCOUNT
4.3.4(Manufacture)	-	550	DISCOUNT
4.3.5(Handle)	-	550	DISCOUNT
4.3.5(Handle)	-	550	DISCOUNT
4.3.5(Handle)	-	550	DISCOUNT
4.3.5(Handle)	-	550	DISCOUNT
4.3.5(Handle)	-	550	DISCOUNT
5.1(Air-Pressure Test)	-	550	DISCOUNT
5.2(Handle Pull Test)	-	550	DISCOUNT
5.3(Hydraulic Pressure Test)	-	550	DISCOUNT

30 Jun, 2028

-
-

IS 6956 (2001)

Cover paper - Specification (First Revision)

8150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Grarnmage-As per 6 of IS 1060 (Part 1)-Further a mean of 10 test results shall not vary from nominal grarnmage by more than ±4 percent.)	-	500	-
4.3(Grarnmage-As per 6 of IS 1060 (Part 1)- no single test result shall vary by more than *6 percent from nominal)	-	500	-
4.2,Table1 (One minute Cobb test (Test method Column 4 and 5 of table1))	-	600	-
4.2,Table1 (Smoothness (Bendtsen)-(Test method Column 4 and 5 of table1))	-	550	-
4.2,Table1 (Burst Index-(Test method Column 4 and 5 of table1))	-	700	-
4.2,Table1 (Ph(Test method Column 4 and 5 of table1))	-	550	-
4.2,Table1 (Folding endurance-MD-(Test method Column 4 and 5 of table1))	-	300	-
4.2,Table1 (Folding endurance-CD-(Test method Column 4 and 5 of table1))	-	300	-
4.2,Table1 (Tensile Index-CD(Test method Column 4 and 5 of table1))	-	450	-
4.2,Table1 (Tensile Index-MD(Test method Column 4 and 5 of table1))	-	450	-
4.2,Table1 (Brightness(For white paper only) -(Test method Column 4 and 5 of table1))	-	700	-
4.2,Table1 (Opacity, (Test method Column 4 and 5 of table1))	-	700	-
4.2,Table1 (Bending stiffness index,-CD-(Test method Column 4 and 5 of table1))	-	350	-
4.2,Table1 (Bending stiffness index,-MD-(Test method Column 4 and 5 of table1))	-	350	-
4.1(REQUIREMENTS-General)	-	550	-
4.2,Table1 (Wax pick-(Test method Column 4 and 5 of table1))	-	1100	-
4.4.1.1(Additional Requirements for ECO-Mark)	-	550	-
4.4.3(Product Specific Requirements)	-	550	-
4.4.4(Product Specific Requirements)	-	550	-

30 Jun, 2028

-
-

IS 15073 : Part 2 (2008)

Packaging of electric detonator: Part 2 corrugated fibreboard cases

10650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(MARKING)	-	0	-
5.1(MARKING)	-	0	-
5.2(BIS CERTIFICATION MARKING)	-	0	-
5.2.1(BIS CERTIFICATION MARKING)	-	0	-
6(TESTING OF CORRUGATED FIBREBOARD AS PER TABLE 1 AND CLAUSE 4.4)	-	0	-
6.3.1(i) SUBSTANCE, g/m2, AS PER TABLE 1)	-	900	-
6.3.1(ii) DIMENSIONAL REQUIREMENT AS PER TABLE 1 AND CLAUSE 4.4.)	-	550	-
6.3.1(iii) BURST TEST AS PER TABLE 1)	-	550	-
6.3.1(iv) WATER ABSORPTION TEST AS PER TABLE 1)	-	600	-
6.3.1(v) DROP TEST AS PER TABLE 2)	-	2000	-
6.3.1(vi) INCLINED IMPACT TEST AS PER TABLE 2)	-	2000	-
6.3.1(vii) STACKING TEST AS PER TABLE 2)	-	2000	-

30 Jun, 2028

-
-

IS 1783 : Part 1 (2014)

Drums large, fixed ends - Specification: Part 1 grade A drums (Fourth Revision)

9550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Capacity)	-	500	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 2))	-	550	-
5(Dimensions (Type 1 C Drums Figure 2))	-	550	-
5(Dimensions (Type 1 D Drums Figure 2))	-	550	-
9.1(Leakage at air pressure )	-	900	-
9.2(Drop Test)	-	2000	-
8(Finish )	-	550	-
6, b(Thickness of ends(1.25± 0.09))	-	500	-
5, Fig 2(Type 2 D(h3: 4 min))	-	500	-

30 Jun, 2028

-
-

IS 1783 : Part 2 (2014)

Drums large, fixed ends - Specification: Part 2 grade B drums (Fourth Revision)

9550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Capacity)	-	500	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 1))	-	550	-
5(Dimensions (Type 1 C Drums Figure 2))	-	550	-
5(Dimensions (Type 1 C Drums Figure 2))	-	550	-
5(Dimensions (Type 1 C Drums Figure 2))	-	550	-
5(Dimensions (Type 1 D Drums Figure 2))	-	550	-
5(Dimensions (Type 1 C Drums Figure 2))	-	550	-
6(Material)	-	550	-
7(Construction)	-	550	-
8(Finish )	-	550	-
9.1(Leakage at air pressure )	-	900	-
9.2(Drop Test)	-	2000	-
9.3(Hydraulic Pressure Test)	-	900	-

30 Jun, 2028

-
-

IS 15351 (2015)

Agro textiles – Laminated high density polyethylene (HDPE) woven geomembrane for water proof lining – Specification (second revision)

24875 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(HDPE Tapes)	-	3300	-
3.2(HDPE Fabric)	-	3300	-
5.1(Lamination)	-	250	-
5.2(Panel Width)	-	250	-
5.3(Joints/Seams)	-	350	-
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	250	-
5.1.1 and 6.2(Mass, g/sq m)	-	250	-
5.1.1 and 6.2(Dimensions, mm- Annexure A of IS 11652)	-	250	-
5.1.1 and 6.2(Length)	-	250	-
5.1.1 and 6.2(Width)	-	0	-
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	875	-
5.1.1 and 6.2(Breaking Load on 20 cm X 10 cm Strip, Min )	-	350	-
5.1.1 and 6.2(Before UV exposure IS 13162 (Part 5)	-	15000	-
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	300	-
Table-1(Breaking load on 20 × 10 cm strip, N, Min after)	-	350	-
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	0	-
5.1.1 and 6.2( Min, gram force at 50 percent failure-Annex C)	-	350	-
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	350	-
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	550	-
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	550	-
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	350	-
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	350	-
5.1.1 and 6.2(Hydrostatic resistance-Annex E)	-	450	-
Table-1(Hydrostatic resistance after UV exposure of 1000 h -Annex B and Annex E)	-	450	-
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	300	-

30 Jun, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Indian Institute of Packaging (IIP), Mumbai

Plot E2, MIDC Area, Andheri East, Road No.8, Post Box No. 9432, Mumbai 400093, Maharashtra, India, Andheri, Mumbai, Maharashtra, 400093

2228219803 rdiip@iip-in.com

Scope List