BIS - LIMS (Laboratory Information Management System)

RTC cum Technology Back up Unit for Solar Thermal Devices (RTC), Pune

CENTRE FOR ENERGY STUDIES, SAVITRIBAI PHULE PUNE UNIVERSITY, Pune, Pune, Maharashtra, 411007

9765361124 hodenergy@unipune.ac.in

Scope List

Reset

9 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 12933 : Part 1 (2003)

Solar flat plate collector - Specification: Part 1 requirements (Second Revision)

Designed for Normal Fluid Temp. less than 100 Degree C

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Static Pressure Leakage Test)	-	3000	GST Extra
7.2.1(Outdoor No Flow Exposure Test )	-	3000	GST Extra
7.2.2(External Thermal Shock Test )	-	3000	GST Extra
7.2.2(Internal Thermal Shock Test )	-	3000	GST Extra
7.2.4(Rain Penetration Test)	-	3000	GST Extra
7.2.5(Impact Resistance Test)	-	3000	GST Extra
7.2.6(Thermal Efficiency Test)	-	45000	GST Extra
7.2.7(Determination of the Time Constant )	-	3000	GST Extra
7.2.8(Incident Angle Modifier Test)	-	22000	GST Extra
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	6000	GST Extra
5(SHAPE AND DIMENSIONS)	-	6000	GST Extra

26 Oct, 2026

-
-

IS 12933 (Part 2) (2025)

Solar Flat Plate Collector - Specification Part 2 Components (Third Revision)

Designed for Normal Fluid Temp. less than 100 Degree C

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Material (cover plate))	-	1000	-
Cl-5.1(Transmittance Test)	-	1000	-
Cl-5.1.2(cover glass of the solar collector)	-	0	-
Cl-5.1.3(Global solar radiation)	-	0	-
Cl-6(Material (Collector Box))	-	0	-
Cl-6.1 (a)(Aluminum alloy)	-	0	-
Cl-6.1 (b)(Fibre glass)	-	0	-
Cl-6.2(Minimum thickness)	-	0	-
Cl-7(Workmanship and Finish)	-	1000	-
Cl-7.3(Resistance to Abrasion)	-	0	-
Cl-8(Fabrication)	-	1000	-
Cl-9(Absorber)	-	0	-
Cl-9.1.4(Temperature Test)	-	1000	-
Cl-9.2.1(Static Pressure Leakage Test)	-	1000	-
Cl-9.2.2(Bonding between Riser and Sheet)	-	1000	-
Cl-10(Back and Side Insulation)	-	1000	-
Cl-11(Material (Gaskets and Grommets))	-	1000	-
Cl-12.1.1(Thermal Shock Test)	-	1000	-
Cl-6.1 (c)(CRCA steel)	-	0	-
Cl-6.1 (d)(Galvanized steel sheets)	-	0	-
Cl-6.1 (e)(continuously pre-painted galvanized steel)	-	0	-
Cl-6.1 (f)(HRC steel sheets)	-	0	-
Cl-6.1 (d)(continuously pre-painted galvanized steel)	-	0	-
Cl-6.1 (e)(HRC steel sheets)	-	0	-

26 Oct, 2026

-
Included w.e.f. 22.01.2026

IS 12933 : Part 1 (2025)

Solar Flat Plate Collector - Specification Part 1 Requirements (Third Revision)

Designed for Normal Fluid Temp. less than 100 Degree C

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Components)	-	6000	-
Cl-5(Shape and Dimensions)	-	6000	-
Cl-6(Assembly and Workmanship)	-	0	-
Cl-7.1.1(Static Pressure Leakage Test)	-	3000	-
Cl-7.2.1(Outdoor No Flow Exposure Test)	-	3000	-
Cl-7.2.2(External Thermal Shock Test)	-	3000	-
Cl-7.2.3(Internal Thermal Shock Test)	-	3000	-
Cl-7.2.4(Rain Penetration Test)	-	3000	-
Cl-7.2.5(Impact Resistance Test)	-	3000	-
Cl-7.2.6(Thermal Efficiency Test)	-	45000	-
Cl-7.2.7(Determination of the Time Constant)	-	3000	-
Cl-7.2.8(Incident Angle Modifier Test)	-	22000	-
Cl-9(Marking)	-	0	-
Cl-4(Components)	-	6000	-
Cl-5(Shape and Dimensions)	-	6000	-
Cl-6(Assembly and Workmanship)	-	0	-
Cl-7.1.1(Static Pressure Leakage Test)	-	3000	-
Cl-7.2.1(Outdoor No Flow Exposure Test)	-	3000	-
Cl-7.2.2(External Thermal Shock Test)	-	3000	-
Cl-7.2.3(Internal Thermal Shock Test)	-	3000	-
Cl-7.2.4(Rain Penetration Test)	-	3000	-
Cl-7.2.5(Impact Resistance Test)	-	3000	-
Cl-7.2.6(Thermal Efficiency Test)	-	45000	-
Cl-7.2.7(Determination of the Time Constant)	-	3000	-
Cl-7.2.8(Incident Angle Modifier Test)	-	22000	-
Cl-9(Marking)	-	0	-

26 Oct, 2026

-
Included w.e.f. 22.01.2026

IS 16543 (2024)

All-glass evacuated solar collector tubes - Specification (First revision)

Non-Concentrating Type Solar Collector Hot water O/P

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.2.2(Uniformity)	-	250	GST Extra
Cl 7.4(Stagnation Performance Parameter Test)	-	1200	GST Extra
Cl 7.5(Stagnation Solar Irradiation Test)	-	1200	GST Extra
Cl 7.6(Average Heat Loss Coefficient Test)	-	1200	GST Extra
Cl 7.7(Vacuum Performance Test)	-	1200	GST Extra
Cl 7.8(Resistance to Thermal Shock Test)	-	1500	GST Extra
Cl 7.9(Resistance to Impact Test)	-	250	GST Extra
Cl 7.10(0 Resistance to Internal Pressure Test)	-	250	GST Extra
Cl 7.11(Absorptivity and Emissivity Test of the Selective Coating)	-	1200	GST Extra
Cl 5.1.1(Transmittance ratio ( material))	-	250	GST Extra
Cl 5.1.2(Bubble & crack (material))	-	250	GST Extra
Cl 5.1.3(Knots (material))	-	250	GST Extra
Cl 5.1.4(Solar absorbing ratio (material))	-	250	GST Extra
Cl 5.2.1(Scratch length and visibility)	-	250	GST Extra
Cl 5.2.3(Colour fading area)	-	250	GST Extra
Cl 5.2.6(Length of an all-glass evacuated solar collector tube)	-	250	GST Extra
Cl 5.2.7(Bending of the all-glass evacuated solar collector tube)	-	250	GST Extra
Cl 5.2.8(Cross-section of the open end)	-	250	GST Extra
Cl 4.2 & table 1(Outer Diameter of Cover Glass Tube)	-	250	GST Extra
Cl 4.2 & table 1(Outer Diameter of Inner Glass Tube Including Coating)	-	250	GST Extra
Cl 4.2 & table 1(Tube Length)	-	250	GST Extra
Cl 4.2 & table 1(The Thickness of Cover and Inner Glass Tube)	-	250	GST Extra
Cl 4.2 & table 1(Sealed off Part Length)	-	250	GST Extra
Cl 4.3(Absorber Area for Different Tube Sizes)	-	250	GST Extra
Cl 4.5(Calculation for Number of Tubes for The Heating System)	-	250	GST Extra
Cl 4.1(Structure of All-Glass Evacuated Solar Collector Tube)	-	250	GST Extra
Cl 5.2.2(Appearance of selective coating)	-	250	GST Extra
Cl 5.2.5(The inner and cover tube at the open end)	-	250	GST Extra
Cl 5.2.9(Sealed end)	-	250	GST Extra
Cl 9(Marking)	-	250	GST Extra
Cl 4.4(Solar Selective Absorbing Coating)	-	250	GST Extra
Cl 5.2.4(Strut member)	-	250	GST Extra

26 Oct, 2026

-
-

IS 16544 (2016)

All glass evacuated tubes solar water heating system

Non-Concentrating Direct Vented Solar Collector

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Pre-Conditioning Test)	-	6000	GST Extra
6.2.1 (Annex - B)(Exterior Test)	-	6000	GST Extra
6.2.2 (Annex - C)(Leakage Test)	-	6000	GST Extra
6.2.3 (Annex - D)(Stagnation Test)	-	6000	GST Extra
6.2.4 (Annex - E)(External Thermal Shock Test)	-	6000	GST Extra
6.2.5 (Annex - F)(Internal Thermal Shock Test)	-	6000	GST Extra
6.2.6(Thermal Performance Test)	-	60000	GST Extra
6.2.7()	-	2000	GST Extra
5(General Requirements)	-	2000	GST Extra

26 Oct, 2026

-
-

IS 16368 (2015)

Test procedure for thermosyphon type domestic solar hot water heating systems

Non-Concentrating Direct Vented Solar Collector

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Pre-Conditioning Test)	-	14000	GST Extra
6.2(Static Pressure Leakage Test)	-	6000	GST Extra
7(Thermal Performance Test)	-	60000	GST Extra

26 Oct, 2026

-
-

IS 16542 (2016)

Direct insertion type storage water tank for all glass evacuated tubes solar collector - Specification

Direct Insertion Type

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3(Ideal Heating Test)	-	1000	GST Extra
8.2(Leakage Test)	-	1000	GST Extra
8.4(Integral Test)	-	1000	GST Extra
8.5(Performance Test)	-	3000	GST Extra
7.6(Thermal Shock Test for Inner Sealing)	-	1000	GST Extra
7.7(Thermal Shock Test for outer Sealing)	-	1000	GST Extra
6(GENERAL REQUIREMENTS)	-	1000	GST Extra
8.1(Measurement of Storage Water Tank Capacity)	-	1000	GST Extra

26 Oct, 2026

-
-

IS 12933 : Part 2 (2003)

Solar flat plate collector - Specification: Part 2 components (Second Revision)

Designed for Normal Fluid Temp. less than 100 Degree C

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Transmittance Test)	-	1000	GST Extra
9.1.4(Temperature Test)	-	1000	GST Extra
12.1.1(Thermal Shock Test)	-	1000	GST Extra
7(WORKMANSHIP AND FINISH)	-	1000	GST Extra
8(FABRICATION)	-	1000	GST Extra
9.2.1(Static Pressure Leakage Test)	-	1000	GST Extra
9.2.2(Bonding Between Riser and Sheet)	-	1000	GST Extra
10(BACK AND SIDE INSULATION)	-	1000	GST Extra
11(MATERIALS)	-	1000	GST Extra

26 Oct, 2026

-
-

IS 16543 (2016)

All glass evacuated solar collector tubes - Specification

Non-Concentrating Type Solar Collector Hot water O/P

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.3 (Annex - A)(Stagnation Performance Parameter Test)	-	750	GST Extra
7.4 (Annex - B)(Stagnation Solar Irradiance Test)	-	750	GST Extra
7.5 (Annex - C)(Average Heat Loss Coefficient Test)	-	750	GST Extra
7.6 (Annex - D-1)(Air Pressure Test Inside the Vacuum Jacket)	-	500	GST Extra
7.6 (Annex - D-2)(Vacuum Quality Test)	-	500	GST Extra
7.7 (Annex - E)(Resistance to Thermal Shock Test)	-	750	GST Extra
7.8 (Annex - F)(Resistance to Impact Test)	-	500	GST Extra
7.9 (Annex - G)(Resistance to Internal Pressure Test)	-	750	GST Extra
7.10 (Annex - H-2)(Absorptivity Test of Selective Coating)	-	750	GST Extra
7.10 (Annex - H-3)(Emissivity Test of selective coating)	-	750	GST Extra
5(GENERAL REQUIREMENTS)	-	250	GST Extra
7.1(Dimensions)	-	250	GST Extra
7.2(Appearance and Dimensions)	-	250	GST Extra

26 Oct, 2026

-
-

Bureau of Indian Standards

The National Standards Body of India

RTC cum Technology Back up Unit for Solar Thermal Devices (RTC), Pune

CENTRE FOR ENERGY STUDIES, SAVITRIBAI PHULE PUNE UNIVERSITY, Pune, Pune, Maharashtra, 411007

9765361124 hodenergy@unipune.ac.in

Scope List