BIS - LIMS (Laboratory Information Management System)

Indian Plywood Industries Research & Training

karnataka, Bengaluru Rural, Karnataka,

8030534016 contactus@ipirti.gov.in

Scope List

Reset

16 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 303 (1989)

Plywood for General Purposes -

6670 View breakup
Rs.6670/- MR, Rs.6000/- BWR

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	600	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	126	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	126	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	126	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	126	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	126	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	300	-
11.3(Moisture Content - Part 1 of IS 1734)	-	840	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	1150	-
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	2300	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	575	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	575	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	575	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	575	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	575	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	575	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	575	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	575	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	1150	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	300	-

Complete

17 Jan, 2023

Deferred w.e.f. 30.07.2024

IS 13958 (1994)

Bamboo Mat Board For General Purposes -specification

6670 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Dimensions and tolerances)	-	630	-
9.3.1(Internal bond strength in Dry State)	-	195	-
9.3.2(Internal bond strength in Wet State)	-	195	-
9.3.3(Mycological Test)	-	2300	-
9.4.2(surface strength test in Wet State)	-	4600	-

Complete

17 Jan, 2023

Deferred w.e.f. 30.07.2024

IS 1328 (1996)

Veneered Decorative Plywood -Specification

4600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Length - Cl. 8)	-	120	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	120	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	120	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	120	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	120	-
11(Tests - Moisture Content - Part 1 of IS 1734)	-	840	-
11(Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-	1910	-

Complete

17 Jan, 2023

Deferred w.e.f. 30.07.2024

IS 14587 (1998)

Prelaminated Medium Density Fibre Board -specification

21670 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions and tolerances)	-	630	-
10.2, Table-1(Test for Density)	-	840	-
10.4, Table-1(Test for Water Absorption)	-	2300	-
10.5(test for swelling in water)	-	2300	-
10.6(test for modulis of rupture)	-	2300	-
10.7(Test for tensile strength perpendicular to Surface)	-	875	-
10.8(Test for tensile strength perpendicular to Surface after ageing )	-	875	-
10.9(test screw withdrawal strength)	-	1750	-
10.1(test for surface abrasion resistance)	-	3500	-
10.11(test for resistance to steam)	-	650	-
10.12(test for resistance to crack)	-	550	-
10.13(test for resistance to cigarette burn)	-	550	-
10.14(test for resistance to stain)	-	510	-

Complete

17 Jan, 2023

Deferred w.e.f. 30.07.2024

IS 2202 : Part 1 (1999)

Wooden flush door shutters (Solid Core Type) - Specification: Part 1 plywood face panels (Sixth Revision)

20840 View breakup
Rs.20840/- For all tests, Rs.5250/- For Acceptance test only

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.1(Height - IS 4020 (Pt-2))	-	90	-
11.1(Width- IS 4020 (Pt-2))	-	90	-
11.1(Thickness - IS 4020 (Pt-2))	-	90	-
11.1(Variation in thickness - IS 4020 (Pt-2))	-	90	-
11.1( Squareness Test - IS 4020 (Pt-2))	-	90	-
11.2( Twist, cupping & wrapping - IS 4020 (Pt-3))	-	90	-
11.3(Depth of deviation - IS 4020(Pt-4))	-	90	-
11.14(Glue Adhesion Test - IS 4020(Pt-15))	-	1000	-
11.4(Impact Indentation Test - IS 4020(Pt-5))	-	2170	-
11.5(Deflection at maximum load - IS 4020(Pt-6))	-	1085	-
11.5(Residual deflection - IS 4020(Pt-6))	-	1085	-
11.8(Buckling Test - IS 4020(Pt-9))	-	2170	-
11.6(Deflection of the edge at maximum load - IS 4020(Pt-7))	-	2170	-
11.15(Screw Withdrawal Strength - IS 4020 (Pt-16))	-	1750	-
11.11(Varying Humidity Test - IS 4020(Pt-12))	-	6100	-
11.1(Misuse Test - IS 4020(Pt-11))	-	2500	-
11.12(End Immersion Test - IS 4020(Pt-13))	-	1300	-
11.13(Knife Test - IS 4020(Pt-14))	-	840	-
11.9(Slamming Test - IS 4020(Pt-10))	-	1480	-
11.7(Shock Resistance Test -IS 4020(Pt-8))	-	3500	-

Complete

17 Jan, 2023

Deferred w.e.f. 30.07.2024

IS 5509 (2000)

Fire retardant plywood - Specification (Second Revision)

7520 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(a) Length)	-	126	-
8(b) Width)	-	126	-
8(c) Thickness 1) less than 6mm ±10% 2) 6 mm and above ±5% )	-	126	-
8.3 & Annex A (e) Edge Squareness 0.2% Max.)	-	126	-
8.3 & Annex A (d) Edge Straightness 0.2% Max.)	-	126	-
12.2(Moisture content )	-	840	-
12.3.1(Flammability )	-	2400	-
12.3.2(Flame Penetration )	-	2500	-
12.2.3(Rate of burning )	-	2600	-

Complete

17 Jan, 2023

Deferred w.e.f. 30.07.2024

IS 12406 (2003)

Medium density fibre boards for general purpose - Specification (First Revision)

13750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Dimensions & Tolerances)	-	315	-
Cl 8(Dimensions & Tolerances)	-	315	-
Cl 11.4(Test For Density)	-	840	-
Cl 11.5(Test For Moisture Content)	-	840	-
Cl 11.6(Test For water Absorption)	-	1150	-
Cl 11.6(Test For water Absorption)	-	1150	-
Cl 11.7.1(Due To General Absorption)	-	1050	-
Cl 11.8(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	4600	-
Cl 11.9(Test For Internal Bond)	-	2300	-
Cl 11.10(Test For Screw Withdrawal Strength)	-	1750	-

Complete

17 Jan, 2023

Deferred w.e.f. 30.07.2024

IS 15380 (2003)

Moulded Raised High Density Fibre (HDF) Panel Doors -

19170 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.1(Dimension and squareness test)	-	630	-
11.2(General flatness test)	-	630	-
11.3(low Planeness Teat)	-	630	-
11.13(glue adhesion test)	-	1000	-
11.4(Impact Indentation Test)	-	2170	-
11.5(Flexure Test)	-	2170	-
11.8(Buckling Test)	-	2170	-
11.6(edge loading test)	-	2170	-
11.14(screw withdrawal resistance test)	-	1750	-
11.11(varying humidity test)	-	6100	-
11.1(misuse test)	-	2500	-
11.12(end immersion test)	-	1300	-
11.9(slamming Test)	-	1480	-
11.7(shock resistance test)	-	3500	-

Complete

17 Jan, 2023

Deferred w.e.f. 30.07.2024

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

MR/BWP

9200 View breakup
Rs.9200/- MR; Rs.8850/- BWR

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.3(Dimensional Requirements - Length - 8.1.4)	-	105	-
7.3(Dimensional Requirements - Width - 8.1.4)	-	105	-
7.3(Dimensional Requirements - Thickness - Annexure E)	-	105	-
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	105	-
7.3(Dimensional Requirements - Squareness - Annexure D)	-	105	-
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	105	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	130	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	130	-
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	130	-
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	130	-
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	130	-
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	325	-
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	325	-
9.2.3(Adhesion of Plies - Annexure H)	-	830	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	2300	-
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	2300	-
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	1150	-
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	1150	-
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	1150	-
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	1150	-
9.2.6(Spot test - Annexure L)	-	830	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	2300	-

Complete

17 Jan, 2023

Deferred w.e.f. 30.07.2024

IS 3087 (2005)

Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

16830 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3(Dimensional Tolerances)	-	600	-
9.2, 11.4(Moisture content)	-	830	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	2300	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	2300	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	2300	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	2300	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	2300	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	1750	-
11.10(screw withdrawal strength)	-	1750	-

Complete

17 Jan, 2023

Deferred w.e.f. 30.07.2024

IS 848 (2006)

Synthetic resin adhesives for plywood (Phenolic And Aminoplastic) - Specification (Second Revision)

5840 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.4(Acidity and Alkalinity ( pH))	-	1210	-
4 Table (i)(BWP (BOiling WaterProof))	-	766	-
4 Table (i)(BWR (Boiling Water Resistant))	-	766	-
4 Table (i)(MR (Moisture Ressistant))	-	766	-
5,7.4(Keeping Quality (Resistance to heat Polymerization))	-	1490	-

Complete

17 Jan, 2023

Deferred w.e.f. 30.07.2024

IS 1658 (2006)

Fibre hardboards - Specification (Third Revision)

5250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-1(Dimensions and tolerances in accordance with Annex A&B)	-	650	-
10.4.1 Table- 2 i(Test for Density as per Annex C)	-	840	-
10.4.2 Table- 2 ii(Test for Moisture content as per Annex D)	-	840	-
10.4.3 Table- 2 iii(Test for Water absorption as per Annex E)	-	2300	-
10.4.4 Table- 2 iv(Test for Swelling in thickness as per Annex F)	-	2300	-
10.4.5 Table- 2 v(Test forTensile strength as per Annex G)	-	1750	-
10.4.6 Table- 2 vi(Modulus of rupture as per Annex H)	-	2300	-
10.4.6 Table- 2 vii(Modulus of elasticity as per Annex H)	-	2300	-
6(Workability and finish)	-	1200	-

Complete

17 Jan, 2023

Deferred w.e.f. 30.07.2024

IS 3097 (2006)

Veneered Particle Boards -Specification

12500 View breakup
Rs.7512/-; Rs.6260/- (for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jan, 2023

Deferred w.e.f. 30.07.2024

IS 710 (2010)

Marine plywood - Specification (Second Revision)

BWP

21670 View breakup
Rs.16800/- (Including preservatives); Rs.10000/- (Excluding preservatives)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(DIMENSIONS)	-	126	-
6.1(DIMENSIONS)	-	126	-
6.2(DIMENSIONS)	-	126	-
6.3(DIMENSIONS)	-	126	-
6.3(DIMENSIONS)	-	126	-
9.1.1(MOISTURE CONTENT)	-	800	-
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	500	-
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	500	-
9.1.3 , 9.1.3.1.1(Water resistance test)	-	1150	-
9.1.3 , 9.1.3.1.2(Water resistance test)	-	1150	-
9.1.5(Mycological test)	-	1150	-
9.1.5 , 9.1.3.1.1(Mycological test)	-	1150	-
9.1.5 , 9.1.3.1.2(Mycological test)	-	1150	-
9.1.4(Tensile strength)	-	2300	-
9.1.6 (Table 3)(Static bending strength)	-	2300	-
9.1.6 (Table 3)(Static bending strength)	-	2300	-
9.1.7 (Table 4)(Wet bending strength)	-	2300	-
9.1.7 (Table 4)(Wet bending strength)	-	2300	-
9.1.8(Retention of preservative)	-	11670	-

Complete

17 Jan, 2023

Deferred w.e.f. 30.07.2024

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

BWP

22500 View breakup
Rs.17925/- (Including preservatives); Rs.10830/- (Excluding preservatives)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2(DIMENSIONS & TOLERANCES )	-	157.5	-
7.2(DIMENSIONS & TOLERANCES )	-	157.5	-
7.3(DIMENSIONS & TOLERANCES )	-	157.5	-
7.4(DIMENSIONS & TOLERANCES )	-	157.5	-
10.1.1(MOISTURE CONTENT)	-	840	-
10.1.2, 10.1.2.1 (Table-1)(GLUE ADHESION IN DRY STATE)	-	1000	-
10.1.3, 10.1.3.1.1 (Table-1)(RESISTANCE TO WATER TEST)	-	2300	-
10.1.5.2(MYCOLOGICAL TEST )	-	2300	-
10.1.6(TENSILE STRENGTH)	-	2300	-
10.1.7 (Table-2)(STATIC BENDING STRENGTH)	-	2300	-
10.1.9(RETENTION OF PRESERVATIVE)	-	11670	-
10.1.7 (Table-2)(STATIC BENDING STRENGTH)	-	2300	-
10.1.8 (Table-3)(WET BENDING STRENGTH)	-	2300	-
10.1.8 (Table-3)(WET BENDING STRENGTH)	-	2300	-
8.3(WORKMANSHIP AND FINISH )	-	600	-

Complete

17 Jan, 2023

Deferred w.e.f. 30.07.2024

IS 14276 (2016)

Cement bonded particle boards - Specification (First Revision)

13840 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Dimensions and Tolerances)	-	630	-
10.3, Table-1(Test for Density)	-	840	-
Clause 8.2 Table 1(Moisture content)	-	840	-
10.5, Table-1(Test for Water Absorption)	-	2300	-
10.6, Table-1(Test for swelling in water)	-	2300	-
10.7, Table-1(Test for modulus of Rupture)	-	2300	-
10.8, Table-1(Test for modulus of Elasticity)	-	2300	-
10.9, Table-1(Test for tensile strength perpendicular to Surface)	-	2300	-
10.1, Table-1(Test for Screw Withdrawal Strength)	-	1750	-

Complete

17 Jan, 2023

Deferred w.e.f. 30.07.2024 REVISED VERSION OF IS 14276:2016 INCLUDED W.E.F. 20-02-2019.

Bureau of Indian Standards

The National Standards Body of India

Indian Plywood Industries Research & Training

karnataka, Bengaluru Rural, Karnataka,

8030534016 contactus@ipirti.gov.in

Scope List

No Record Found