BIS - LIMS (Laboratory Information Management System)

SGS India Pvt Ltd, Gurgaon

226, Udyog Vihar, Phase-I, Gurgaon, Gurugram, Haryana, 122016

9871794626 amit.sureka@sgs.com

Scope List

Reset

6 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 17043 : Part 2 (2024)

Shoes: Shoes for General Purpose

Footwear

69550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Shape and Design)	-	0	Mechanical Rs. 26900, Chemical: For Leather Lining with Textile or PU Footbed Rs. 23200, Textile Lining with Textile Footbed Rs.19450
Cl-5.3(Material)	-	200	-
Cl-5.4 S.No (1), i(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	500	-
Cl-5.4, S.No (1), ii(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	500	-
Cl-5.4, S.No (1), iii(Whole shoe flexing, flexes)	-	1000	-
Cl-5.4, S.No (1), iv(Water proofness on complete shoe)	-	1500	-
Cl-5.4, S.No (1), v(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	1500	-
Cl-5.4, S.No (1), vi(Attachment strength of strap and buckle/D-ring N)	-	500	-
Cl-5.4, S.No (1), vii(Attachment strength of strap and velcro , N, Min)	-	500	-
Cl-5.4, S.No (1), viii(Strength of eyelet attachment, N, Min)	-	500	-
Cl-5.4, S.No (1), ix(Heel pull off strength, N, Min)	-	500	-
Cl-5.4, S.No (1), x(Top piece attachment strength, N, Min)	-	500	-
Cl-5.4, S.No (1), xi(Seam strength, N/mm, Min)	-	500	-
Cl-5.4, S.No (1), xii(Whole shoe topline strength, N, Min)	-	600	-
Cl-5.4, S.No (1), xiii(Abrasion resistance (volume loss), mm3)	-	900	-
Cl-5.4, S.No (1), xiv(Chemical requirements(3))	-	42650	For Leather Lining with Textile or PU footbed Rs 23200 Textile Lining with Textile foot bed 19450
Cl-5.4, S.No (1), xv(Lead content (as Pb) ppm, Max)	-	1500	-
Cl-5.4, S.No (1), xvi(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	4700	-
Cl-6.1.1, S.No (1), i(Tear trength, N)	-	500	-
Cl-6.1.1, S.No (1), ii(Flexing resistance, flexes)	-	900	-
Cl-6.1.1, S.No (1), iii(Colour fastness to rubbing (marring/staining))	-	500	-
Cl-6.1.1, S.No (1), iv(Colour fastness to water (contact method- multi fabrics))	-	500	-
Cl-6.1.1 S.No (1), v(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	900	-
Cl-6.1.1 S.No (1), vi(Stitch tear strength, N/mm, Min)	-	500	-
Cl-6.1.1, S.No (1), vii(Abrasion resistance)	-	900	-
Cl-6.1.2, S.No (1), i(Colour fastness to light, Marring, Min)	-	1000	-
Cl-6.1.2, S.No (1), ii(Water resistance)	-	750	-
Cl-6.1.2, S.No (1), iii(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	1000	-
Cl-6.1.3, S.No (1), i(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	500	-
Cl-6.1.3, S.No (1), ii(Tear Strength, N, Min)	-	500	-
Cl-6.1.3, S.No (1), iii(Strength at needle perforation, N/mm, Min)	-	750	-
Cl-6.1.3, S.No (1), iv(Flexing resistance, Flexes)	-	900	-
Cl-6.1.3, S.No (1), v(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	900	-
Cl-6.1.3, S.No (1), vi(Hydrolysis resistance)	-	4700	-
Cl-6.1.3, S.No (1), vii(Abrasion resistance)	-	900	-
Cl-6.1.4, S.No (1), i(Colour fastness to light, Marring, Min)	-	1000	-
Cl-6.1.4, S.No (1), ii(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	1000	-
Cl-6.2, S.No (1), i(Tear strength, N, Min)	-	500	-
Cl-6.2 S.No (1), ii(Abrasion resistance)	-	900	-
Cl-6.2 S.No (1), iii(Colour fastness rubbing (crocking))	-	500	-
Cl-6.2, S.No (1), iv(Colour fastness to perspiration)	-	500	-
Cl-6.2, S.No (1), v(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	900	-
Cl-6.3, S.No (1), i(Flexing index, Min)	-	900	-
Cl-6.3, S.No (1), ii(Abrasion resistance at 400 cycles)	-	900	-
Cl-6.3, S.No (1), iii(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	750	-
Cl-6.4, S.No (1), i(Thickness, mm, Min)	-	200	-
Cl-6.4, S.No (1), ii(Abrasion resistance)	-	900	-
Cl-6.4, S.No (1), iii(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	750	-
Cl-6.5.1, S.No (1), i(Flexing resistance)	-	900	-
Cl-6.5.1, S.No (1), ii(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	4700	-
Cl-6.5.1, S.No (1), iii(Compression set, percent, Max)	-	1000	-
Cl-6.5.2.1, S.No (1), i(Grain crack index, Min)	-	400	-
Cl-6.5.2.1, S.No (1), ii(Density, g/cm3 , Min)	-	400	-
Cl-6.5.2.1, S.No (1), iii(Abrasion resistance, mm/kcs, Max)	-	900	-
Cl-6.5.2.2, S.No (1), i(Water resistance, (dynamic method))	-	900	-
Cl-6.5.2.3, S.No (1), i(Hardness, Min)	-	400	-
Cl-6.5.2.3, S.No (1), ii(Density, g/cm3 , Max)	-	400	-
Cl-6.5.2.3 S.No (1), iii(Abrasion resistance (volume loss), mm3 , Max)	-	900	-
Cl-6.5.2.3, S.No (1), iv(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	500	-
Cl-6.6, S.No (1), i(Heat shrinkage, percent, Max)	-	750	-
Cl-6.6, S.No (1), ii(Split tear strength, kg/25 mm, Min)	-	500	-
Cl-6.6, S.No (1), iii(Compression set, percent, Max)	-	1000	-
Cl-6.7, S.No (1), i(Hardness, N)	-	2000	-
Cl-6.7, S.No (1), ii(Resilience, percent)	-	0	-
Cl-6.7, S.No (1), iii(Moisture resistance, percent)	-	0	-
Cl-6.9, S.No (1), ii(Needle strength, N/mm, Min)	-	750	-
Cl-6.10, S.No (1), i(Lace breaking strength, N, Min)	-	500	-
Cl-6.10, S.No (1), ii(Lace tag strength, N, Min)	-	500	-
Cl-6.10, S.No (1), iii(Lace to lace abrasion resistance, cycles)	-	750	-
Cl-6.10, S.No (1), iv(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	500	-
Cl-6.10, S.No (1), v(Corrosion resistance)	-	750	-
Cl-6.11, S.No (1), i(Fatigue resistance, cycles, Min)	-	700	-
Cl-6.11, S.No (1), ii(Security of puller attachment strength, N, Min)	-	500	-
Cl-6.11, S.No (1), iii(Lateral load, N, Min)	-	500	-
Cl-6.11, S.No (1), iv(End attachment strength, N, Min)	-	1000	-
Cl-8.1(Marking)	-	0	-
Cl-8.1(Marking)	-	0	-
Cl-6.7, S.No (1), iv(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	0	-
Cl-6.7, S.No (1), v(Adhesion strength, N/mm)	-	500	-
Cl-6.8, S. No. (1) i(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	1500	-
Cl- 6.8, S. No. 1(ii)(a) Shear strength, kPa b) Initial, Min)	-	1500	-
Cl- 6.9, S. No. (1) i(Limit of useful extension, percent, Min)	-	750	-
Cl- 6.9, S. No. (1) ii(Needle strength, N/mm, Min)	-	750	-
Cl-5.1(Shape and Design)	-	0	-
Cl-5.3(Material)	-	0	-
Cl-5.4 S.No (1), i(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	0	-
Cl-5.4, S.No (1), ii(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	0	-
Cl-5.4, S.No (1), iii(Whole shoe flexing, flexes)	-	0	-
Cl-5.4, S.No (1), iv(Water proofness on complete shoe)	-	0	-
Cl-5.4, S.No (1), v(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	0	-
Cl-5.4, S.No (1), vi(Attachment strength of strap and buckle/D-ring N)	-	0	-
Cl-5.4, S.No (1), vii(Attachment strength of strap and velcro , N, Min)	-	0	-
Cl-5.4, S.No (1), viii(Strength of eyelet attachment, N, Min)	-	0	-
Cl-5.4, S.No (1), ix(Heel pull off strength, N, Min)	-	0	-
Cl-5.4, S.No (1), x(Top piece attachment strength, N, Min)	-	0	-
Cl-5.4, S.No (1), xi(Seam strength, N/mm, Min)	-	0	-
Cl-5.4, S.No (1), xii(Whole shoe topline strength, N, Min)	-	0	-
Cl-5.4, S.No (1), xiii(Abrasion resistance (volume loss), mm3)	-	0	-
Cl-5.4, S.No (1), xiv(Chemical requirements(3))	-	0	-
Cl-5.4, S.No (1), xv(Lead content (as Pb) ppm, Max)	-	0	-
Cl-5.4, S.No (1), xvi(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	0	-
Cl-6.1.1, S.No (1), i(Tear trength, N)	-	0	-
Cl-6.1.1, S.No (1), ii(Flexing resistance, flexes)	-	0	-
Cl-6.1.1, S.No (1), iii(Colour fastness to rubbing (marring/staining))	-	0	-
Cl-6.1.1, S.No (1), iv(Colour fastness to water (contact method- multi fabrics))	-	0	-
Cl-6.1.1 S.No (1), v(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	0	-
Cl-6.1.1 S.No (1), vi(Stitch tear strength, N/mm, Min)	-	0	-
Cl-6.1.1, S.No (1), vii(Abrasion resistance)	-	0	-
Cl-6.1.2, S.No (1), i(Colour fastness to light, Marring, Min)	-	0	-
Cl-6.1.2, S.No (1), ii(Water resistance)	-	0	-
Cl-6.1.2, S.No (1), iii(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	0	-
Cl-6.1.3, S.No (1), i(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	0	-
Cl-6.1.3, S.No (1), ii(Tear Strength, N, Min)	-	0	-
Cl-6.1.3, S.No (1), iii(Strength at needle perforation, N/mm, Min)	-	0	-
Cl-6.1.3, S.No (1), iv(Flexing resistance, Flexes)	-	0	-
Cl-6.1.3, S.No (1), v(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	0	-
Cl-6.1.3, S.No (1), vi(Hydrolysis resistance)	-	0	-
Cl-6.1.3, S.No (1), vii(Abrasion resistance)	-	0	-
Cl-6.1.4, S.No (1), i(Colour fastness to light, Marring, Min)	-	0	-
Cl-6.1.4, S.No (1), ii(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	0	-
Cl-6.2, S.No (1), i(Tear strength, N, Min)	-	0	-
Cl-6.2 S.No (1), ii(Abrasion resistance)	-	0	-
Cl-6.2 S.No (1), iii(Colour fastness rubbing (crocking))	-	0	-
Cl-6.2, S.No (1), iv(Colour fastness to perspiration)	-	0	-
Cl-6.2, S.No (1), v(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	0	-
Cl-6.3, S.No (1), i(Flexing index, Min)	-	0	-
Cl-6.3, S.No (1), ii(Abrasion resistance at 400 cycles)	-	0	-
Cl-6.3, S.No (1), iii(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	0	-
Cl-6.4, S.No (1), i(Thickness, mm, Min)	-	0	-
Cl-6.4, S.No (1), ii(Abrasion resistance)	-	0	-
Cl-6.4, S.No (1), iii(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	0	-
Cl-6.5.1, S.No (1), i(Flexing resistance)	-	0	-
Cl-6.5.1, S.No (1), ii(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	0	-
Cl-6.5.1, S.No (1), iii(Compression set, percent, Max)	-	0	-
Cl-6.5.2.1, S.No (1), i(Grain crack index, Min)	-	0	-
Cl-6.5.2.1, S.No (1), ii(Density, g/cm3 , Min)	-	0	-
Cl-6.5.2.3, S.No (1), i(Hardness, Min)	-	0	-
Cl-6.5.2.3, S.No (1), ii(Density, g/cm3 , Max)	-	0	-
Cl-6.5.2.3 S.No (1), iii(Abrasion resistance (volume loss), mm3 , Max)	-	0	-
Cl-6.5.2.3, S.No (1), iv(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	0	-
Cl-6.6, S.No (1), i(Heat shrinkage, percent, Max)	-	0	-
Cl-6.6, S.No (1), ii(Split tear strength, kg/25 mm, Min)	-	0	-
Cl-6.6, S.No (1), iii(Compression set, percent, Max)	-	0	-
Cl-6.7, S.No (1), i(Hardness, N)	-	0	-
Cl-6.7, S.No (1), ii(Resilience, percent)	-	0	-
Cl-6.7, S.No (1), iii(Moisture resistance, percent)	-	0	-
Cl-6.9, S.No (1), ii(Needle strength, N/mm, Min)	-	0	-
Cl-6.10, S.No (1), i(Lace breaking strength, N, Min)	-	0	-
Cl-6.10, S.No (1), ii(Lace tag strength, N, Min)	-	0	-
Cl-6.10, S.No (1), iii(Lace to lace abrasion resistance, cycles)	-	0	-
Cl-6.10, S.No (1), iv(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	0	-
Cl-6.10, S.No (1), v(Corrosion resistance)	-	0	-
Cl-6.11, S.No (1), i(Fatigue resistance, cycles, Min)	-	0	-
Cl-6.11, S.No (1), ii(Security of puller attachment strength, N, Min)	-	0	-
Cl-6.11, S.No (1), iii(Lateral load, N, Min)	-	0	-
Cl-6.11, S.No (1), iv(End attachment strength, N, Min)	-	0	-
Cl-8.1(Marking)	-	0	-
Cl-8.1(Marking)	-	0	-
Cl-6.7, S.No (1), iv(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	0	-
Cl-6.7, S.No (1), v(Adhesion strength, N/mm)	-	0	-
Cl-6.8, S. No. (1) i(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	0	-
Cl- 6.8, S. No. 1(ii)(a) Shear strength, kPa b) Initial, Min)	-	0	-
Cl- 6.9, S. No. (1) i(Limit of useful extension, percent, Min)	-	0	-
Cl- 6.9, S. No. (1) ii(Needle strength, N/mm, Min)	-	0	-
CL. 5.4, Table 1, Sl No (xiv) & Table 1 of IS 17011(pH, Min)	-	0	-
CL. 5.4, Table 1, Sl No (xv)("Lead content (as Pb) ppm, Max (applicable only for PVC")	-	0	-
Cl-5.1(Shape and Design)	-	0	-
Cl-5.3(Material)	-	0	-
Cl-5.4 S.No (1), i(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	0	-
Cl-5.4, S.No (1), ii(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	0	-
Cl-5.4, S.No (1), iii(Whole shoe flexing, flexes)	-	0	-
Cl-5.4, S.No (1), iv(Water proofness on complete shoe)	-	0	-
Cl-5.4, S.No (1), v(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	0	-
Cl-5.4, S.No (1), vi(Attachment strength of strap and buckle/D-ring N)	-	0	-
Cl-5.4, S.No (1), vii(Attachment strength of strap and velcro , N, Min)	-	0	-
Cl-5.4, S.No (1), viii(Strength of eyelet attachment, N, Min)	-	0	-
Cl-5.4, S.No (1), ix(Heel pull off strength, N, Min)	-	0	-
Cl-5.4, S.No (1), x(Top piece attachment strength, N, Min)	-	0	-
Cl-5.4, S.No (1), xi(Seam strength, N/mm, Min)	-	0	-
Cl-5.4, S.No (1), xii(Whole shoe topline strength, N, Min)	-	0	-
Cl-5.4, S.No (1), xiii(Abrasion resistance (volume loss), mm3)	-	0	-
Cl-5.4, S.No (1), xiv(Chemical requirements(3))	-	0	-
Cl-5.4, S.No (1), xv(Lead content (as Pb) ppm, Max)	-	0	-
Cl-5.4, S.No (1), xvi(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	0	-
Cl-6.1.1, S.No (1), i(Tear trength, N)	-	0	-
Cl-6.1.1, S.No (1), ii(Flexing resistance, flexes)	-	0	-
Cl-6.1.1, S.No (1), iii(Colour fastness to rubbing (marring/staining))	-	0	-
Cl-6.1.1, S.No (1), iv(Colour fastness to water (contact method- multi fabrics))	-	0	-
Cl-6.1.1 S.No (1), v(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	0	-
Cl-6.1.1 S.No (1), vi(Stitch tear strength, N/mm, Min)	-	0	-
Cl-6.1.1, S.No (1), vii(Abrasion resistance)	-	0	-
Cl-6.1.2, S.No (1), i(Colour fastness to light, Marring, Min)	-	0	-
Cl-6.1.2, S.No (1), ii(Water resistance)	-	0	-
Cl-6.1.2, S.No (1), iii(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	0	-
Cl-6.1.3, S.No (1), i(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	0	-
Cl-6.1.3, S.No (1), ii(Tear Strength, N, Min)	-	0	-
Cl-6.1.3, S.No (1), iii(Strength at needle perforation, N/mm, Min)	-	0	-
Cl-6.1.3, S.No (1), iv(Flexing resistance, Flexes)	-	0	-
Cl-6.1.3, S.No (1), v(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	0	-
Cl-6.1.3, S.No (1), vi(Hydrolysis resistance)	-	0	-
Cl-6.1.3, S.No (1), vii(Abrasion resistance)	-	0	-
Cl-6.1.4, S.No (1), i(Colour fastness to light, Marring, Min)	-	0	-
Cl-6.1.4, S.No (1), ii(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	0	-
Cl-6.2, S.No (1), i(Tear strength, N, Min)	-	0	-
Cl-6.2 S.No (1), ii(Abrasion resistance)	-	0	-
Cl-6.2 S.No (1), iii(Colour fastness rubbing (crocking))	-	0	-
Cl-6.2, S.No (1), iv(Colour fastness to perspiration)	-	0	-
Cl-6.2, S.No (1), v(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	0	-
Cl-6.3, S.No (1), i(Flexing index, Min)	-	0	-
Cl-6.3, S.No (1), ii(Abrasion resistance at 400 cycles)	-	0	-
Cl-6.3, S.No (1), iii(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	0	-
Cl-6.4, S.No (1), i(Thickness, mm, Min)	-	0	-
Cl-6.4, S.No (1), ii(Abrasion resistance)	-	0	-
Cl-6.4, S.No (1), iii(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	0	-
Cl-6.5.1, S.No (1), i(Flexing resistance)	-	0	-
Cl-6.5.1, S.No (1), ii(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	0	-
Cl-6.5.1, S.No (1), iii(Compression set, percent, Max)	-	0	-
Cl-6.5.2.1, S.No (1), i(Grain crack index, Min)	-	0	-
Cl-6.5.2.1, S.No (1), ii(Density, g/cm3 , Min)	-	0	-
Cl-6.5.2.3, S.No (1), i(Hardness, Min)	-	0	-
Cl-6.5.2.3, S.No (1), ii(Density, g/cm3 , Max)	-	0	-
Cl-6.5.2.3 S.No (1), iii(Abrasion resistance (volume loss), mm3 , Max)	-	0	-
Cl-6.5.2.3, S.No (1), iv(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	0	-
Cl-6.6, S.No (1), i(Heat shrinkage, percent, Max)	-	0	-
Cl-6.6, S.No (1), ii(Split tear strength, kg/25 mm, Min)	-	0	-
Cl-6.6, S.No (1), iii(Compression set, percent, Max)	-	0	-
Cl-6.7, S.No (1), i(Hardness, N)	-	0	-
Cl-6.7, S.No (1), ii(Resilience, percent)	-	0	-
Cl-6.7, S.No (1), iii(Moisture resistance, percent)	-	0	-
Cl-6.9, S.No (1), ii(Needle strength, N/mm, Min)	-	0	-
Cl-6.10, S.No (1), i(Lace breaking strength, N, Min)	-	0	-
Cl-6.10, S.No (1), ii(Lace tag strength, N, Min)	-	0	-
Cl-6.10, S.No (1), iii(Lace to lace abrasion resistance, cycles)	-	0	-
Cl-6.10, S.No (1), iv(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	0	-
Cl-6.10, S.No (1), v(Corrosion resistance)	-	0	-
Cl-6.11, S.No (1), i(Fatigue resistance, cycles, Min)	-	0	-
Cl-6.11, S.No (1), ii(Security of puller attachment strength, N, Min)	-	0	-
Cl-6.11, S.No (1), iii(Lateral load, N, Min)	-	0	-
Cl-6.11, S.No (1), iv(End attachment strength, N, Min)	-	0	-
Cl-8.1(Marking)	-	0	-
Cl-8.1(Marking)	-	0	-
Cl-6.7, S.No (1), iv(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	0	-
Cl-6.7, S.No (1), v(Adhesion strength, N/mm)	-	0	-
Cl-6.8, S. No. (1) i(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	0	-
Cl- 6.8, S. No. 1(ii)(a) Shear strength, kPa b) Initial, Min)	-	0	-
Cl- 6.9, S. No. (1) i(Limit of useful extension, percent, Min)	-	0	-
Cl- 6.9, S. No. (1) ii(Needle strength, N/mm, Min)	-	0	-
CL. 5.4, Table 1, Sl No (xiv) & Table 1 of IS 17011(pH, Min)	-	0	-
CL. 5.4, Table 1, Sl No (xv)("Lead content (as Pb) ppm, Max (applicable only for PVC")	-	0	-

Complete

16 Feb, 2027

Included w.e.f 21.10.2024 Colour fastness to light test - Scope restricted to Exposure Cycle A1 Exclusion : Cl-5.4, S.No (1), xiii (Abrasion resistance (volume loss), mm3) Cl-6.5.2.1, S.No (1), iii (Abrasion resistance, mm/kcs, Max) Cl-6.5.2.2, S.No (1), i (Water resistance, (dynamic method))

IS 15844 : Part 3 (2024)

Sports Footwear Part 3 Professional Sports Footwear

Sports Footwear

83000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Size and Fittings)	-	0	-
Cl-5(Design)	-	0	-
Cl-6(Size and Fittings)	-	0	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	500	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	1000	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	500	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	1000	-
Cl.7.1.3(Complete Shoe Flexing)	-	1000	-
Cl.7.1.4(Washability)	-	500	-
Cl.7.1.5(Slip Resistance)	-	1500	-
Cl.7.1.6(Heel Drop)	-	300	-
Cl.7.2 Table-2 S.No- (i)("Flexing resistance, Min a) Dry condition b) Wet condition")	-	600	-
Cl.7.2 Table-2 S.No- (ii)(Tear strength (average force), N, Min)	-	500	-
Cl.7.2 Table-2 S.No- (iii)("Colour fastness rubbing a-Dry b-Wet")	-	500	-
Cl.7.2 Table-2 S.No- (iv)("a) Water vapour permeability b) Water vapour coefficient")	-	900	-
Cl.7.2 Table-2 S.No- (v)(Stitch tear strength N/mm, Min)	-	500	-
Cl.7.2 Table-2 S.No- (vi)(Colour fastness to light grey scale rate)	-	1000	-
Cl.7.2 Table-2 S.No- (vii)(Tensile strength)	-	500	-
Cl.7.2 Table-2 S.No- (viii)(Elongation at break, percent)	-	0	-
Cl.7.2 Table-2 S.No- (ix)("Abrasion test a) Dry b) Wet")	-	900	-
Cl.7.2 Table-3 S.No- (i)(Breaking strength, N/mm, Min)	-	500	-
Cl.7.2 Table-3 S.No- (ii)(Elongation at break, percent, Min)	-	0	-
Cl.7.2 Table-3 S.No- (iii)(Tear strength, N, Min)	-	500	-
Cl.7.2 Table-3 S.No- (iv)(Strength at needle perforation)	-	750	-
Cl.7.2 Table-3 S.No- (v)("Flexing resistance a-Dry condition, b) Wet condition")	-	600	-
Cl.7.2 Table-3 S.No- (vi)("a) Water vapour permeability b) Water vapour coefficient")	-	900	-
Cl.7.2 Table-3 S.No- (vii)(Hydrolysis resistance)	-	4500	-
Cl.7.2 Table-3 S.No- (viii)(Colour fastness to light grey scale rate)	-	1000	-
Cl.7.2 Table-3 S.No- (ix)(Bursting strength)	-	500	-
Cl.7.3 Table-4 S.No- (i)(Tear strength, N, Min)	-	500	-
Cl.7.3 Table-4 S.No- (ii)("Abrasion resistance, a) Dry b) Wet ")	-	900	-
Cl.7.3 Table-4 S.No- (iii)(Colour fastness to rubbing, grey scale rate with 10 rubs on dry or wet, Min)	-	500	-
Cl.7.3 Table-4 S.No- (iv)(Colour fastness to perspiration (contact method) grey scale rate, Min)	-	500	-
Cl.7.3 Table-4 S.No- (v)("a-Water vapour permeability b-Water vapour coefficient")	-	900	-
Cl.7.4 Table-5 S.No- (i)(Flexing index, Min)	-	900	-
Cl.7.4 Table-5 S.No- (ii)(Abrasion resistance)	-	900	-
Cl.7.4 Table-5 S.No- (iii)("a) Water absorption b) Water desorption")	-	750	-
Cl.7.5 Table-6 S.No- (i)("Abrasion resistance a) Dry condition b) Wet condition")	-	900	-
Cl.7.5 Table-6 S.No- (ii)("a) Water absorption b) Water desorption")	-	750	-
Cl.7.5 Table-6 S.No- (iii)(Heat resistance shrinkage linear, percent, Max)	-	750	-
Cl.7.6 Table-7 S.No- (i)(Abrasion resistance)	-	900	-
Cl.7.6 Table-7 S.No- (ii)("Flexing resistance a) Bennewart Method b) Ross flexing method")	-	600	-
Cl.7.6 Table-7 S.No- (iii)(Hydrolysis resistance)	-	4700	-
Cl.7.6 Table-7 S.No- (iv)(Tear strength, N/mm, Min)	-	600	-
Cl.7.6 Table-7 S.No- (v)(Tensile strength)	-	600	-
Cl.7.6 Table-7 S.No- (vi)(Elongation at break percent, Min)	-	0	-
Cl.7.6 Table-7 S.No- (vii)(Compression set percent, Max)	-	1000	-
Cl.7.7 Table-8 S.No- (i)("Compression set, percent, Max a) For EVA b) For all other material")	-	1000	-
Cl.7.7 Table-8 S.No- (ii)(Split tear strength)	-	500	-
Cl.7.7 Table-8 S.No- (iii)(Heat shrinkage, percent, Ma)	-	750	-
Cl.7.7 Table-8 S.No- (iii)(Elongation at break, percent, Min)	-	600	-
Cl.7.7 Table-8 S.No- (iv)(Elongation at break, percent, Min)	-	600	-
Cl.7.8 Table-9 S.No- (i)(First dry collapsing load, hardness, N, Min)	-	2000	-
Cl.7.8 Table-9 S.No- (ii)(Resilience, percent, Min)	-	0	-
Cl.7.8 Table-9 S.No- (iii)(Moisture resistance, percent, Min)	-	0	-
Cl.7.8 Table-9 S.No- (iv)("a) Initial dry area shape retention, percent, Min b) Area shape retention after 10th collapse, dry, percent, Min ")	-	0	-
Cl.7.8 Table-9 S.No- (v)(Peel strength, N/nm, Min)	-	500	-
Cl.7.9 Table-10 S.No- (i)("Peel strength, N/mm, Min a) Initial b) After 5 000 wear cycles")	-	750	-
Cl.7.9 Table-10 S.No- (ii)("Shear strength, kPa, Min a) Initial b) After 5 000 wear cycles")	-	750	-
Cl.7.10 Table-11 S.No- (i)(Limit of useful extension, percent, Min)	-	750	-
Cl.7.10 Table-11 S.No- (ii)(Needle strength, N/mm, Min)	-	750	-
Cl.7.11 Table-12 S.No- (i)(Breaking strength of lace)	-	500	-
Cl.7.11 Table-12 S.No- (ii)(Lace tag strength)	-	500	-
Cl.7.11 Table-12 S.No- (iii)(Lace to lace abrasion)	-	700	-
Cl.7.11 Table-12 S.No- (iv)(Colour fastness to water (for lace) (Contact method))	-	500	-
Cl.7.11 Table-12 S.No- (v)(Strength of buckle/ski hook/D-ring,)	-	500	-
Cl.7.11 Table-12 S.No- (vi)("Corrosion resistance (applicable for all including decorative metal part) ")	-	750	-
Cl.7.11 Table-13 S.No- (i)(Corrosion resistance (applicable for metallic spikes))	-	750	-
Cl-7.12.1, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	7000	-
Cl-7.12.1, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	2000	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	4300	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1600	-
Cl-7.12.1, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	1600	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	5000	-
Cl-7.12.1, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	5000	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	5000	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1600	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	4300	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	2000	-
Cl-7.12.1, Table no. 1 of IS 17011,(x)(pH)	-	750	-
Cl-7.12.1, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	4500	-
C-7.12.1, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3000	-
Cl-7.12.2(PVC is present in sports shoe)	-	500	-
Cl- 8.1(Marking)	-	0	-
Cl-6(Size and Fittings)	-	0	-
Cl-5(Design)	-	0	-
Cl-6(Size and Fittings)	-	0	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	0	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	0	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	0	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	0	-
Cl.7.1.3(Complete Shoe Flexing)	-	0	-
Cl.7.1.4(Washability)	-	0	-
Cl.7.1.5(Slip Resistance)	-	0	-
Cl.7.1.6(Heel Drop)	-	0	-
Cl.7.2 Table-2 S.No- (i)("Flexing resistance, Min a) Dry condition b) Wet condition")	-	0	-
Cl.7.2 Table-2 S.No- (ii)(Tear strength (average force), N, Min)	-	0	-
Cl.7.2 Table-2 S.No- (iii)("Colour fastness rubbing a-Dry b-Wet")	-	0	-
Cl.7.2 Table-2 S.No- (iv)("a) Water vapour permeability b) Water vapour coefficient")	-	0	-
Cl.7.2 Table-2 S.No- (v)(Stitch tear strength N/mm, Min)	-	0	-
Cl.7.2 Table-2 S.No- (vi)(Colour fastness to light grey scale rate)	-	0	-
Cl.7.2 Table-2 S.No- (vii)(Tensile strength)	-	0	-
Cl.7.2 Table-2 S.No- (viii)(Elongation at break, percent)	-	0	-
Cl.7.2 Table-2 S.No- (ix)("Abrasion test a) Dry b) Wet")	-	0	-
Cl.7.2 Table-3 S.No- (i)(Breaking strength, N/mm, Min)	-	0	-
Cl.7.2 Table-3 S.No- (ii)(Elongation at break, percent, Min)	-	0	-
Cl.7.2 Table-3 S.No- (iii)(Tear strength, N, Min)	-	0	-
Cl.7.2 Table-3 S.No- (iv)(Strength at needle perforation)	-	0	-
Cl.7.2 Table-3 S.No- (v)("Flexing resistance a-Dry condition, b) Wet condition")	-	0	-
Cl.7.2 Table-3 S.No- (vi)("a) Water vapour permeability b) Water vapour coefficient")	-	0	-
Cl.7.2 Table-3 S.No- (vii)(Hydrolysis resistance)	-	0	-
Cl.7.2 Table-3 S.No- (viii)(Colour fastness to light grey scale rate)	-	0	-
Cl.7.2 Table-3 S.No- (ix)(Bursting strength)	-	0	-
Cl.7.3 Table-4 S.No- (i)(Tear strength, N, Min)	-	0	-
Cl.7.3 Table-4 S.No- (ii)("Abrasion resistance, a) Dry b) Wet ")	-	0	-
Cl.7.3 Table-4 S.No- (iii)(Colour fastness to rubbing, grey scale rate with 10 rubs on dry or wet, Min)	-	0	-
Cl.7.3 Table-4 S.No- (iv)(Colour fastness to perspiration (contact method) grey scale rate, Min)	-	0	-
Cl.7.3 Table-4 S.No- (v)("a-Water vapour permeability b-Water vapour coefficient")	-	0	-
Cl.7.4 Table-5 S.No- (i)(Flexing index, Min)	-	0	-
Cl.7.4 Table-5 S.No- (ii)(Abrasion resistance)	-	0	-
Cl.7.4 Table-5 S.No- (iii)("a) Water absorption b) Water desorption")	-	0	-
Cl.7.5 Table-6 S.No- (i)("Abrasion resistance a) Dry condition b) Wet condition")	-	0	-
Cl.7.5 Table-6 S.No- (ii)("a) Water absorption b) Water desorption")	-	0	-
Cl.7.5 Table-6 S.No- (iii)(Heat resistance shrinkage linear, percent, Max)	-	0	-
Cl.7.6 Table-7 S.No- (i)(Abrasion resistance)	-	0	-
Cl.7.6 Table-7 S.No- (ii)("Flexing resistance a) Bennewart Method b) Ross flexing method")	-	0	-
Cl.7.6 Table-7 S.No- (iii)(Hydrolysis resistance)	-	0	-
Cl.7.6 Table-7 S.No- (iv)(Tear strength, N/mm, Min)	-	0	-
Cl.7.6 Table-7 S.No- (v)(Tensile strength)	-	0	-
Cl.7.6 Table-7 S.No- (vi)(Elongation at break percent, Min)	-	0	-
Cl.7.6 Table-7 S.No- (vii)(Compression set percent, Max)	-	0	-
Cl.7.7 Table-8 S.No- (i)("Compression set, percent, Max a) For EVA b) For all other material")	-	0	-
Cl.7.7 Table-8 S.No- (ii)(Split tear strength)	-	0	-
Cl.7.7 Table-8 S.No- (iii)(Heat shrinkage, percent, Ma)	-	0	-
Cl.7.7 Table-8 S.No- (iii)(Elongation at break, percent, Min)	-	0	-
Cl.7.7 Table-8 S.No- (iv)(Elongation at break, percent, Min)	-	0	-
Cl.7.8 Table-9 S.No- (i)(First dry collapsing load, hardness, N, Min)	-	0	-
Cl.7.8 Table-9 S.No- (ii)(Resilience, percent, Min)	-	0	-
Cl.7.8 Table-9 S.No- (iii)(Moisture resistance, percent, Min)	-	0	-
Cl.7.8 Table-9 S.No- (iv)("a) Initial dry area shape retention, percent, Min b) Area shape retention after 10th collapse, dry, percent, Min ")	-	0	-
Cl.7.8 Table-9 S.No- (v)(Peel strength, N/nm, Min)	-	0	-
Cl.7.9 Table-10 S.No- (i)("Peel strength, N/mm, Min a) Initial b) After 5 000 wear cycles")	-	0	-
Cl.7.9 Table-10 S.No- (ii)("Shear strength, kPa, Min a) Initial b) After 5 000 wear cycles")	-	0	-
Cl.7.10 Table-11 S.No- (i)(Limit of useful extension, percent, Min)	-	0	-
Cl.7.10 Table-11 S.No- (ii)(Needle strength, N/mm, Min)	-	0	-
Cl.7.11 Table-12 S.No- (i)(Breaking strength of lace)	-	0	-
Cl.7.11 Table-12 S.No- (ii)(Lace tag strength)	-	0	-
Cl.7.11 Table-12 S.No- (iii)(Lace to lace abrasion)	-	0	-
Cl.7.11 Table-12 S.No- (iv)(Colour fastness to water (for lace) (Contact method))	-	0	-
Cl.7.11 Table-12 S.No- (v)(Strength of buckle/ski hook/D-ring,)	-	0	-
Cl.7.11 Table-12 S.No- (vi)("Corrosion resistance (applicable for all including decorative metal part) ")	-	0	-
Cl.7.11 Table-13 S.No- (i)(Corrosion resistance (applicable for metallic spikes))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(x)(pH)	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	0	-
C-7.12.1, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Cl-7.12.2(PVC is present in sports shoe)	-	0	-
Cl- 8.1(Marking)	-	0	-
Cl-6(Size and Fittings)	-	0	-
Cl-5(Design)	-	0	-
Cl-6(Size and Fittings)	-	0	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	0	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	0	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	0	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	0	-
Cl.7.1.3(Complete Shoe Flexing)	-	0	-
Cl.7.1.4(Washability)	-	0	-
Cl.7.1.5(Slip Resistance)	-	0	-
Cl.7.1.6(Heel Drop)	-	0	-
Cl.7.2 Table-2 S.No- (i)("Flexing resistance, Min a) Dry condition b) Wet condition")	-	0	-
Cl.7.2 Table-2 S.No- (ii)(Tear strength (average force), N, Min)	-	0	-
Cl.7.2 Table-2 S.No- (iii)("Colour fastness rubbing a-Dry b-Wet")	-	0	-
Cl.7.2 Table-2 S.No- (iv)("a) Water vapour permeability b) Water vapour coefficient")	-	0	-
Cl.7.2 Table-2 S.No- (v)(Stitch tear strength N/mm, Min)	-	0	-
Cl.7.2 Table-2 S.No- (vi)(Colour fastness to light grey scale rate)	-	0	-
Cl.7.2 Table-2 S.No- (vii)(Tensile strength)	-	0	-
Cl.7.2 Table-2 S.No- (viii)(Elongation at break, percent)	-	0	-
Cl.7.2 Table-2 S.No- (ix)("Abrasion test a) Dry b) Wet")	-	0	-
Cl.7.2 Table-3 S.No- (i)(Breaking strength, N/mm, Min)	-	0	-
Cl.7.2 Table-3 S.No- (ii)(Elongation at break, percent, Min)	-	0	-
Cl.7.2 Table-3 S.No- (iii)(Tear strength, N, Min)	-	0	-
Cl.7.2 Table-3 S.No- (iv)(Strength at needle perforation)	-	0	-
Cl.7.2 Table-3 S.No- (v)("Flexing resistance a-Dry condition, b) Wet condition")	-	0	-
Cl.7.2 Table-3 S.No- (vi)("a) Water vapour permeability b) Water vapour coefficient")	-	0	-
Cl.7.2 Table-3 S.No- (vii)(Hydrolysis resistance)	-	0	-
Cl.7.2 Table-3 S.No- (viii)(Colour fastness to light grey scale rate)	-	0	-
Cl.7.2 Table-3 S.No- (ix)(Bursting strength)	-	0	-
Cl.7.3 Table-4 S.No- (i)(Tear strength, N, Min)	-	0	-
Cl.7.3 Table-4 S.No- (ii)("Abrasion resistance, a) Dry b) Wet ")	-	0	-
Cl.7.3 Table-4 S.No- (iii)(Colour fastness to rubbing, grey scale rate with 10 rubs on dry or wet, Min)	-	0	-
Cl.7.3 Table-4 S.No- (iv)(Colour fastness to perspiration (contact method) grey scale rate, Min)	-	0	-
Cl.7.3 Table-4 S.No- (v)("a-Water vapour permeability b-Water vapour coefficient")	-	0	-
Cl.7.4 Table-5 S.No- (i)(Flexing index, Min)	-	0	-
Cl.7.4 Table-5 S.No- (ii)(Abrasion resistance)	-	0	-
Cl.7.4 Table-5 S.No- (iii)("a) Water absorption b) Water desorption")	-	0	-
Cl.7.5 Table-6 S.No- (i)("Abrasion resistance a) Dry condition b) Wet condition")	-	0	-
Cl.7.5 Table-6 S.No- (ii)("a) Water absorption b) Water desorption")	-	0	-
Cl.7.5 Table-6 S.No- (iii)(Heat resistance shrinkage linear, percent, Max)	-	0	-
Cl.7.6 Table-7 S.No- (i)(Abrasion resistance)	-	0	-
Cl.7.6 Table-7 S.No- (ii)("Flexing resistance a) Bennewart Method b) Ross flexing method")	-	0	-
Cl.7.6 Table-7 S.No- (iii)(Hydrolysis resistance)	-	0	-
Cl.7.6 Table-7 S.No- (iv)(Tear strength, N/mm, Min)	-	0	-
Cl.7.6 Table-7 S.No- (v)(Tensile strength)	-	0	-
Cl.7.6 Table-7 S.No- (vi)(Elongation at break percent, Min)	-	0	-
Cl.7.6 Table-7 S.No- (vii)(Compression set percent, Max)	-	0	-
Cl.7.7 Table-8 S.No- (i)("Compression set, percent, Max a) For EVA b) For all other material")	-	0	-
Cl.7.7 Table-8 S.No- (ii)(Split tear strength)	-	0	-
Cl.7.7 Table-8 S.No- (iii)(Heat shrinkage, percent, Ma)	-	0	-
Cl.7.7 Table-8 S.No- (iii)(Elongation at break, percent, Min)	-	0	-
Cl.7.7 Table-8 S.No- (iv)(Elongation at break, percent, Min)	-	0	-
Cl.7.8 Table-9 S.No- (i)(First dry collapsing load, hardness, N, Min)	-	0	-
Cl.7.8 Table-9 S.No- (ii)(Resilience, percent, Min)	-	0	-
Cl.7.8 Table-9 S.No- (iii)(Moisture resistance, percent, Min)	-	0	-
Cl.7.8 Table-9 S.No- (iv)("a) Initial dry area shape retention, percent, Min b) Area shape retention after 10th collapse, dry, percent, Min ")	-	0	-
Cl.7.8 Table-9 S.No- (v)(Peel strength, N/nm, Min)	-	0	-
Cl.7.9 Table-10 S.No- (i)("Peel strength, N/mm, Min a) Initial b) After 5 000 wear cycles")	-	0	-
Cl.7.9 Table-10 S.No- (ii)("Shear strength, kPa, Min a) Initial b) After 5 000 wear cycles")	-	0	-
Cl.7.10 Table-11 S.No- (i)(Limit of useful extension, percent, Min)	-	0	-
Cl.7.10 Table-11 S.No- (ii)(Needle strength, N/mm, Min)	-	0	-
Cl.7.11 Table-12 S.No- (i)(Breaking strength of lace)	-	0	-
Cl.7.11 Table-12 S.No- (ii)(Lace tag strength)	-	0	-
Cl.7.11 Table-12 S.No- (iii)(Lace to lace abrasion)	-	0	-
Cl.7.11 Table-12 S.No- (iv)(Colour fastness to water (for lace) (Contact method))	-	0	-
Cl.7.11 Table-12 S.No- (v)(Strength of buckle/ski hook/D-ring,)	-	0	-
Cl.7.11 Table-12 S.No- (vi)("Corrosion resistance (applicable for all including decorative metal part) ")	-	0	-
Cl.7.11 Table-13 S.No- (i)(Corrosion resistance (applicable for metallic spikes))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(x)(pH)	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	0	-
C-7.12.1, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Cl-7.12.2(PVC is present in sports shoe)	-	0	-
Cl- 8.1(Marking)	-	0	-

Complete

16 Feb, 2027

Included w.e.f 21.10.2024 Colour fastness to light test - Scope restricted to Exposure Cycle A1

IS 15844 : Part 2 (2023)

SPORTS FOOTWEAR PART -2 PERFORMANCE SPORTS FOOTWEAR

Sports Footwear

83000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(SAMPLING AND CONDITIONING)	-	0	-
5(DESIGN)	-	0	-
6(SIZE AND FITTINGS)	-	0	-
7.1.1(Whole Footwear)	-	0	-
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	500	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	500	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	500	-
7.1.5(Energy Absorption at Seat Region)	-	1000	-
7.1.6(Complete Shoe Flexing)	-	1000	-
7.1.7(Washability)	-	500	-
7.1.8(Slip Resistance)	-	1500	-
7.1.9(Heel Drop)	-	300	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	600	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	500	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	500	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	900	-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	0	-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	500	-
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	1000	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	500	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	0	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	750	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	900	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	500	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	0	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	500	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	750	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	600	-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	900	-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	0	-
7.2 , Table No. 3 , vi)(Hydrolysis resistance)	-	4500	-
7.2 , Table No. 3 , vii)(Colour fastness to light grey scale rate)	-	1000	-
7.2 , Table No. 3 , viii)(Bursting Strength,)	-	500	-
7.3 , Table No. 4 , i)(Tear strength,)	-	500	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	900	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	500	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	500	-
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	900	-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	0	-
7.4 , Table No. 5 , i)(Thickness)	-	200	-
7.4 , Table No. 5 , ii)(Flexing index)	-	900	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	900	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	750	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	0	-
7.5 , Table No. 6 , i)(Thickness)	-	200	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	900	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	750	-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	0	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	750	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	900	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	600	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	4700	-
7.6 , Table No. 7 , iv)(Tear strength)	-	600	-
7.6 , Table No. 7 , v)(Tensile strength)	-	600	-
7.6 , Table No. 7 , vi)(Elongation at break)	-	0	-
7.6 , Table No. 7 , vii)(Compression set)	-	1000	-
7.7 , Table No. 8 , i)(Compression set)	-	1000	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	500	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	750	-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	600	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	2000	-
7.8 , Table No. 9 , ii)(Resilience)	-	0	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	0	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	0	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	0	-
7.8 , Table No. 9 , v)(Peel strength)	-	500	-
7.9 , Table No. 10 , i)(Peel strength)	-	750	-
7.9 , Table No. 10 , ii)(Shear strength)	-	750	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	750	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	750	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	500	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	500	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	700	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	500	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	500	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	750	-
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	23200	For Leather Lining with Textile or PU footbed Rs 23200 Textile Lining with Textile foot bed 19450
8(MARKING AND PACKING)	-	0	-
7.12, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	7000	-
7.12, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
7.12, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	2000	-
7.12, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	4300	-
7.12, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1600	-
7.12, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	1600	-
7.12, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	5000	-
7.12, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	5000	-
7.12, Table no. 1 of IS 17011,(x)(pH)	-	750	-
7.12, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	4500	-
7.12, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3000	-
4(SAMPLING AND CONDITIONING)	-	0	-
5(DESIGN)	-	0	-
6(SIZE AND FITTINGS)	-	0	-
7.1.1(Whole Footwear)	-	0	-
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	0	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	0	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	0	-
7.1.5(Energy Absorption at Seat Region)	-	0	-
7.1.6(Complete Shoe Flexing)	-	0	-
7.1.7(Washability)	-	0	-
7.1.8(Slip Resistance)	-	0	-
7.1.9(Heel Drop)	-	0	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	0	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	0	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	0	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	0	-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	0	-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	0	-
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	0	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	0	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	0	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	0	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	0	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	0	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	0	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	0	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	0	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	0	-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	0	-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	0	-
7.2 , Table No. 3 , vi)(Hydrolysis resistance)	-	0	-
7.2 , Table No. 3 , vii)(Colour fastness to light grey scale rate)	-	0	-
7.2 , Table No. 3 , viii)(Bursting Strength,)	-	0	-
7.3 , Table No. 4 , i)(Tear strength,)	-	0	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	0	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	0	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	0	-
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	0	-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	0	-
7.4 , Table No. 5 , i)(Thickness)	-	0	-
7.4 , Table No. 5 , ii)(Flexing index)	-	0	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	0	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	0	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	0	-
7.5 , Table No. 6 , i)(Thickness)	-	0	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	0	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	0	-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	0	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	0	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	0	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	0	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	0	-
7.6 , Table No. 7 , iv)(Tear strength)	-	0	-
7.6 , Table No. 7 , v)(Tensile strength)	-	0	-
7.6 , Table No. 7 , vi)(Elongation at break)	-	0	-
7.6 , Table No. 7 , vii)(Compression set)	-	0	-
7.7 , Table No. 8 , i)(Compression set)	-	0	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	0	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	0	-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	0	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	0	-
7.8 , Table No. 9 , ii)(Resilience)	-	0	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	0	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	0	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	0	-
7.8 , Table No. 9 , v)(Peel strength)	-	0	-
7.9 , Table No. 10 , i)(Peel strength)	-	0	-
7.9 , Table No. 10 , ii)(Shear strength)	-	0	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	0	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	0	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	0	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	0	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	0	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	0	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	0	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	0	-
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	0	-
8(MARKING AND PACKING)	-	0	-
7.12, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
7.12, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
7.12, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	0	-
7.12, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	0	-
7.12, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
7.12, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	0	-
7.12, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	0	-
7.12, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
7.12, Table no. 1 of IS 17011,(x)(pH)	-	0	-
7.12, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	0	-
7.12, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
7.12.2 (Amendment 1)(Lead content)	-	1500	-
4(SAMPLING AND CONDITIONING)	-	0	-
5(DESIGN)	-	0	-
6(SIZE AND FITTINGS)	-	0	-
7.1.1(Whole Footwear)	-	0	-
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	0	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	0	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	0	-
7.1.5(Energy Absorption at Seat Region)	-	0	-
7.1.6(Complete Shoe Flexing)	-	0	-
7.1.7(Washability)	-	0	-
7.1.8(Slip Resistance)	-	0	-
7.1.9(Heel Drop)	-	0	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	0	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	0	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	0	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	0	-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	0	-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	0	-
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	0	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	0	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	0	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	0	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	0	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	0	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	0	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	0	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	0	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	0	-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	0	-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	0	-
7.2 , Table No. 3 , vi)(Hydrolysis resistance)	-	0	-
7.2 , Table No. 3 , vii)(Colour fastness to light grey scale rate)	-	0	-
7.2 , Table No. 3 , viii)(Bursting Strength,)	-	0	-
7.3 , Table No. 4 , i)(Tear strength,)	-	0	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	0	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	0	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	0	-
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	0	-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	0	-
7.4 , Table No. 5 , i)(Thickness)	-	0	-
7.4 , Table No. 5 , ii)(Flexing index)	-	0	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	0	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	0	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	0	-
7.5 , Table No. 6 , i)(Thickness)	-	0	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	0	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	0	-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	0	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	0	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	0	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	0	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	0	-
7.6 , Table No. 7 , iv)(Tear strength)	-	0	-
7.6 , Table No. 7 , v)(Tensile strength)	-	0	-
7.6 , Table No. 7 , vi)(Elongation at break)	-	0	-
7.6 , Table No. 7 , vii)(Compression set)	-	0	-
7.7 , Table No. 8 , i)(Compression set)	-	0	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	0	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	0	-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	0	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	0	-
7.8 , Table No. 9 , ii)(Resilience)	-	0	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	0	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	0	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	0	-
7.8 , Table No. 9 , v)(Peel strength)	-	0	-
7.9 , Table No. 10 , i)(Peel strength)	-	0	-
7.9 , Table No. 10 , ii)(Shear strength)	-	0	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	0	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	0	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	0	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	0	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	0	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	0	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	0	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	0	-
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	0	-
8(MARKING AND PACKING)	-	0	-
7.12, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
7.12, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
7.12, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	0	-
7.12, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	0	-
7.12, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
7.12, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	0	-
7.12, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	0	-
7.12, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
7.12, Table no. 1 of IS 17011,(x)(pH)	-	0	-
7.12, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	0	-
7.12, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
7.12.2 (Amendment 1)(Lead content)	-	0	-

Complete

16 Feb, 2027

Included w.e.f 21.10.2024 Colour fastness to light test - Scope restricted to Exposure Cycle A1

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

General Purpose

74000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	0	-
Cl No.4.2(Construction)	-	0	-
4.3.1(Insole)	-	0	-
4.3.2(Toe spring height)	-	300	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	500	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	500	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	500	-
4.3.6(Energy Absorption at Seat Region)	-	1000	-
4.3.7(Complete Shoe Flexing)	-	1000	-
4.3.8(Washability)	-	1500	-
4.3.9(Slip Resistance)	-	1500	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	600	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	600	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	500	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	500	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	900	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	0	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	500	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	1000	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	500	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	0	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	600	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	600	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	900	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	4500	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	500	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	500	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	900	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	500	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	500	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	900	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	200	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	900	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	900	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	750	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	200	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	900	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	750	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	900	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	600	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	4700	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	1000	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	500	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	750	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	2000	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	0	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	750	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	750	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	750	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	700	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	500	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	750	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	42650	For Leather Lining with Textile or PU footbed Rs 23200 Textile Lining with Textile foot bed 19450
Cl No . 5(MARKING AND PACKING)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	7000	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	3000	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	4300	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1600	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	1600	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	5000	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	5000	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	750	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3000	-
Clause 4.2 - 4.2.1(Construction)	-	500	-
Clause 4.2 - 4.2.2(Construction)	-	500	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	500	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	500	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	500	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	500	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	500	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	500	-
Clause 4.4, Table 1 ii)(Tear strength)	-	0	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	0	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	0	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	0	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	0	-
Clause 4.4, Table 2 iii)(Tear strength)	-	0	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	0	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.5, Table 3 i)(Tear strength)	-	0	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	0	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	0	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.6, Table 4 i)(Thickness)	-	0	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	0	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	0	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	0	-
Clause 4.7, Table 5 i)(Thickness)	-	0	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	0	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	0	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	0	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	0	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	0	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	0	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	0	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	0	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	0	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	300	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	500	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	1000	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	1000	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	1500	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	1500	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	900	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	23200	For Leather Lining with Textile or PU footbed Rs 23200 Textile Lining with Textile foot bed 19450
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	4700	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	1500	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	500	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	500	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	900	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	500	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	700	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	500	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	0	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	500	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	600	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	900	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	4500	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	500	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	900	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	500	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	500	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	900	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	200	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	900	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	900	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	750	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	200	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	900	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	750	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	900	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	4700	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	1000	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	500	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	750	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	2000	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	0	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	0	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	0	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	0	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	1500	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	1500	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	750	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	500	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	500	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	700	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	500	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	500	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	750	-
Cl No.4.3(Whole Footwear)	-	0	-
Cl No.4.1(Sampling and Conditioning)	-	0	-
Cl No.4.2(Construction)	-	0	-
4.3.1(Insole)	-	0	-
4.3.2(Toe spring height)	-	0	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	0	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	0	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	0	-
4.3.6(Energy Absorption at Seat Region)	-	0	-
4.3.7(Complete Shoe Flexing)	-	0	-
4.3.8(Washability)	-	0	-
4.3.9(Slip Resistance)	-	0	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	0	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	0	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	0	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	0	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	0	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	0	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	0	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	0	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	0	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	0	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	0	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	0	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	0	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	0	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	0	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	0	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	0	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	0	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	0	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	0	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	0	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	0	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	0	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	0	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	0	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	0	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	0	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	0	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	0	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	0	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	0	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	0	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	0	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	0	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	0	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	0	-
Cl No . 5(MARKING AND PACKING)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Clause 4.2 - 4.2.1(Construction)	-	0	-
Clause 4.2 - 4.2.2(Construction)	-	0	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	0	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	0	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	0	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	0	-
Clause 4.4, Table 1 ii)(Tear strength)	-	0	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	0	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	0	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	0	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	0	-
Clause 4.4, Table 2 iii)(Tear strength)	-	0	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	0	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.5, Table 3 i)(Tear strength)	-	0	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	0	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	0	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.6, Table 4 i)(Thickness)	-	0	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	0	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	0	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	0	-
Clause 4.7, Table 5 i)(Thickness)	-	0	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	0	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	0	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	0	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	0	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	0	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	0	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	0	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	0	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	0	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	0	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	0	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	0	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	0	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	0	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	0	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	0	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	0	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	0	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	0	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	0	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	0	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	0	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	0	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	0	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	0	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	0	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	0	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	0	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	0	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	0	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	0	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	0	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	0	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	0	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	0	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	0	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	0	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	0	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	0	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	0	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	0	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	0	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	0	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	0	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	0	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	0	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	0	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	0	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	0	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	0	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	0	-
Cl No.4.3(Whole Footwear)	-	0	-
Cl No.4.1(Sampling and Conditioning)	-	0	-
Cl No.4.2(Construction)	-	0	-
4.3.1(Insole)	-	0	-
4.3.2(Toe spring height)	-	0	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	0	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	0	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	0	-
4.3.6(Energy Absorption at Seat Region)	-	0	-
4.3.7(Complete Shoe Flexing)	-	0	-
4.3.8(Washability)	-	0	-
4.3.9(Slip Resistance)	-	0	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	0	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	0	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	0	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	0	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	0	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	0	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	0	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	0	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	0	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	0	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	0	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	0	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	0	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	0	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	0	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	0	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	0	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	0	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	0	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	0	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	0	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	0	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	0	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	0	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	0	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	0	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	0	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	0	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	0	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	0	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	0	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	0	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	0	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	0	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	0	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	0	-
Cl No . 5(MARKING AND PACKING)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Clause 4.2 - 4.2.1(Construction)	-	0	-
Clause 4.2 - 4.2.2(Construction)	-	0	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	0	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	0	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	0	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	0	-
Clause 4.4, Table 1 ii)(Tear strength)	-	0	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	0	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	0	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	0	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	0	-
Clause 4.4, Table 2 iii)(Tear strength)	-	0	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	0	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.5, Table 3 i)(Tear strength)	-	0	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	0	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	0	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.6, Table 4 i)(Thickness)	-	0	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	0	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	0	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	0	-
Clause 4.7, Table 5 i)(Thickness)	-	0	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	0	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	0	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	0	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	0	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	0	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	0	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	0	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	0	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	0	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	0	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	0	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	0	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	0	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	0	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	0	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	0	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	0	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	0	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	0	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	0	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	0	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	0	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	0	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	0	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	0	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	0	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	0	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	0	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	0	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	0	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	0	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	0	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	0	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	0	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	0	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	0	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	0	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	0	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	0	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	0	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	0	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	0	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	0	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	0	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	0	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	0	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	0	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	0	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	0	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	0	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	0	-
Cl No.4.3(Whole Footwear)	-	0	-
Cl No.4.1(Sampling and Conditioning)	-	0	-
Cl No.4.2(Construction)	-	0	-
4.3.1(Insole)	-	0	-
4.3.2(Toe spring height)	-	0	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	0	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	0	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	0	-
4.3.6(Energy Absorption at Seat Region)	-	0	-
4.3.7(Complete Shoe Flexing)	-	0	-
4.3.8(Washability)	-	0	-
4.3.9(Slip Resistance)	-	0	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	0	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	0	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	0	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	0	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	0	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	0	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	0	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	0	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	0	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	0	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	0	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	0	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	0	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	0	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	0	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	0	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	0	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	0	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	0	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	0	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	0	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	0	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	0	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	0	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	0	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	0	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	0	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	0	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	0	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	0	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	0	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	0	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	0	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	0	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	0	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	0	-
Cl No . 5(MARKING AND PACKING)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Clause 4.2 - 4.2.1(Construction)	-	0	-
Clause 4.2 - 4.2.2(Construction)	-	0	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	0	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	0	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	0	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	0	-
Clause 4.4, Table 1 ii)(Tear strength)	-	0	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	0	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	0	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	0	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	0	-
Clause 4.4, Table 2 iii)(Tear strength)	-	0	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	0	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.5, Table 3 i)(Tear strength)	-	0	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	0	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	0	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.6, Table 4 i)(Thickness)	-	0	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	0	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	0	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	0	-
Clause 4.7, Table 5 i)(Thickness)	-	0	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	0	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	0	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	0	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	0	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	0	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	0	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	0	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	0	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	0	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	0	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	0	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	0	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	0	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	0	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	0	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	0	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	0	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	0	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	0	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	0	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	0	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	0	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	0	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	0	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	0	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	0	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	0	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	0	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	0	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	0	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	0	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	0	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	0	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	0	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	0	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	0	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	0	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	0	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	0	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	0	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	0	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	0	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	0	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	0	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	0	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	0	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	0	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	0	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	0	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	0	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	0	-
Cl No.4.3(Whole Footwear)	-	0	-
Cl No.4.1(Sampling and Conditioning)	-	0	-
Cl No.4.2(Construction)	-	0	-
4.3.1(Insole)	-	0	-
4.3.2(Toe spring height)	-	0	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	0	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	0	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	0	-
4.3.6(Energy Absorption at Seat Region)	-	0	-
4.3.7(Complete Shoe Flexing)	-	0	-
4.3.8(Washability)	-	0	-
4.3.9(Slip Resistance)	-	0	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	0	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	0	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	0	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	0	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	0	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	0	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	0	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	0	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	0	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	0	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	0	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	0	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	0	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	0	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	0	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	0	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	0	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	0	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	0	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	0	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	0	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	0	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	0	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	0	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	0	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	0	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	0	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	0	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	0	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	0	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	0	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	0	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	0	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	0	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	0	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	0	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	0	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	0	-
Cl No . 5(MARKING AND PACKING)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Clause 4.2 - 4.2.1(Construction)	-	0	-
Clause 4.2 - 4.2.2(Construction)	-	0	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	0	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	0	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	0	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	0	-
Clause 4.4, Table 1 ii)(Tear strength)	-	0	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	0	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	0	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	0	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	0	-
Clause 4.4, Table 2 iii)(Tear strength)	-	0	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	0	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.5, Table 3 i)(Tear strength)	-	0	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	0	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	0	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.6, Table 4 i)(Thickness)	-	0	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	0	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	0	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	0	-
Clause 4.7, Table 5 i)(Thickness)	-	0	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	0	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	0	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	0	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	0	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	0	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	0	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	0	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	0	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	0	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	0	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	0	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	0	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	0	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	0	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	0	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	0	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	0	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	0	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	0	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	0	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	0	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	0	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	0	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	0	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	0	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	0	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	0	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	0	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	0	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	0	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	0	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	0	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	0	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	0	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	0	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	0	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	0	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	0	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	0	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	0	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	0	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	0	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	0	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	0	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	0	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	0	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	0	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	0	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	0	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	0	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	0	-
Cl No.4.3(Whole Footwear)	-	0	-

Complete

16 Feb, 2027

Included w.e.f 21.10.2024 Colour fastness to light test - Scope restricted to Exposure Cycle A1

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

5250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9873 (Part - 1) 4.11.10(Cords-Cords on toy bags)	-	0	-
9873 (Part - 3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 )	-	306.25	-
9873 (Part - 3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 )	-	306.25	-
9873 (Part - 3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 )	-	306.25	-
9873 (Part - 3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 )	-	306.25	-
9873 (Part - 3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9)	-	306.25	-
9873 (Part - 3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 )	-	306.25	-
9873 (Part - 3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 )	-	306.25	-
9873 (Part - 3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9)	-	306.25	-
9873 (Part - 9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	1400	-
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	1400	-
9873 (Part - 9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	1400	-
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	1400	-

Complete

16 Feb, 2027

IS 9873 : Part 3 (2017)

Safety of toys: Part 3 migration of certain elements (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	-	-
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	-	-
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	-	-
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	-	-
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	-	-
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	-	-
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	-	-
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	-	-
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	-	-
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	-	-
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	-	-
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	-	-
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	-	-
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	-	-
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	-	-
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	-	-

Complete

16 Feb, 2027

Bureau of Indian Standards

The National Standards Body of India

SGS India Pvt Ltd, Gurgaon

226, Udyog Vihar, Phase-I, Gurgaon, Gurugram, Haryana, 122016

9871794626 amit.sureka@sgs.com

Scope List