BIS - LIMS (Laboratory Information Management System)

Northern India Textile Research Association (NITRA), Ghaziabad

Sector-23, Rajnagar, Ghaziabad, Ghaziabad, Uttar Pradesh, 201002

1202807390 mail@nitratextile.org

Scope List

Reset

23 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 16890 (2024)

Textiles — Protective Clothing for Firefighters — Specification

111400 View breakup
-

Clause No.	Exclusion	Remark
Cl-5.1(General)	-	-
Cl-5.2.1(Configuration)	-	-
Cl-5.2.2(Restriction of Movement)	-	-
Cl-5.2.3(Multilayer Clothing Assemblies)	-	-
Cl-5.2.4(Seams)	-	-
Cl-5.2.5(Hardware)	-	-
Cl-5.2.6(Closure Systems)	-	-
Cl-5.2.7(Retroreflective Elements)	-	-
Cl-5.2.8(Sleeve Ends)	-	-
Cl-5.2.9(Clothing Mass)	-	-
Cl-5.2.11(Labels)	-	-
Cl-5.2.12(Size Designations)	-	-
Cl-7.2(Flame Resistance)	-	-
Cl-7.3(Heat Transfer (Flame Exposure))	-	-
Cl-7.4(Heat Transfer (Radiant Exposure))	-	-
Cl-7.5(Contact Heat)	-	-
Cl-7.6(Residual Strength of Material when Exposed to Radiant Heat)	-	-
Cl-7.7(Heat Resistance)	-	-
Cl-7.8(Tensile Strength)	-	-
Cl-7.8(Tensile Strength)	-	-
Cl-7.9(Tear Strength)	-	-
Cl-7.10(Cleaning-Shrinkage Resistance)	-	-
Cl-7.11(Liquid-Chemical Penetration Resistance)	-	-
Cl-7.12(Water-penetration Resistance)	-	-
Cl-7.13(Water-vapour Resistance)	-	-
Cl-8(Marking)	-	-
Cl-5.2.10(Ease of Cleaning)	-	-

-
Included w.e.f 11.09.2025

IS 13472 (1992)

Textiles – Woven, terry towelling fabrics and towels made of man-made fibres and their blends – Specification

All

9000 View breakup
-

Clause No.	Exclusion	Remark
3.1 - 1 - (i), A)(Dimensional change, percent,)	-	-
3.1 - 1 - (ii)(Minimum colour fastness ratings to:)	-	-
3.1 - 1 - (iii)(Wettability, seconds,)	-	-
3.1 - 1 - (iv)(Pilling resistance after 5 hours of test,)	-	-
3.1 - 1 - (v)(Flammability, average time of flame spread,)	-	-
3.1 - 1 - (vi)(Soil Kelease Efficiency, percent)	-	-
3.1 - 1 - (viii)(Breaking strength on 5.0 x 20 cm strips, kgf)	-	-
5(Marking)	-	-
3.1 - 1 - (i), A)(Dimensional change, percent,)	-	-
3.1 - 1 - (i), A)(Dimensional change, percent,)	-	-
3.1 - 1 - (i), A)(Dimensional change, percent,)	-	-

-
included w.e.f.17.06.2025

IS 15768 (2008)

Textiles – Resistance to ignition of upholstered composites used for non-domestic furniture – Specification

90860 View breakup
-

Clause No.	Exclusion	Remark
Cl-4.1(Ignitability)	-	-
Cl-4.2(Durability of Flame Retardant Property)	-	-
Cl-4.3(Toxicity Index)	-	-
Cl-4.4(Visibility Due to Smoke Released on Combustion)	-	-
Cl-6.4(Marking)	-	-
Cl-7(PACKING)	-	-
4.1(Ignitability)	-	-
4.2.1(Carry out the water soaking treatment)	-	-
4.2.2(Dry clean the covering fabric)	-	-
5.1(Lot)	-	-
5.2(Random sample)	-	-
5.3(Absence ofrelevant)	-	-
6.3.1(letters of the wording)	-	-

-
-

IS 17286 (2019)

Textiles – Water-proof multipurpose rain poncho with convertibility as bivouac – Specification

118600 View breakup
-

Clause No.	Exclusion	Remark
Clause 4(STITCHING)	-	-
Clause 4.1(Tolerances)	-	-
Clauses 6.4(Slide fastener)	-	-
Clauses 6.5(Hook and loop fastener)	-	-
Clauses 6.1, Table 1 (i)(Nature of fibre/filament)	-	-
Clauses 6.1, Table 1 (ii)(Nature of coating)	-	-
Clauses 6.1, Table 1 (iii)(Width, cm)	-	-
Clauses 6.1, Table 1 (iv)(End/dm, Min)	-	-
Clauses 6.1, Table 1 (v)(Picks/dm, Min)	-	-
Clauses 6.1, Table 1 (vi)(Mass (Single layer), g/sq. m)	-	-
Clauses 6.1, Table 1 (vii)(Mass of de-proofed fabric, g/sq. m)	-	-
Clauses 6.1, Table 1 (viii)(Breaking strength (strip test) (5 × 20 cm fabric between grips), N, Min: a) Warp-wise b) Weft-wise)	-	-
Clauses 6.1, Table 1 (ix)(Tearing strength (Method A-1), N, Min: a) Warp-wise b) Weft-wise)	-	-
Clauses 6.1, Table 1 (x)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	-
Clauses 6.1, Table 1 (xi)(Colour fastness to rubbing a) Dry b) Wet)	-	-
Clauses 6.1, Table 1 (xii)(Colour fastness to light)	-	-
Clauses 6.1, Table 1 (xiii)(Dimensional change due to relaxation, Max, percent: a) Warp-wise b) Weft-wise)	-	-
Clauses 6.1, Table 1 (xiv)(Resistance to accelerated ageing at 70°C ± 1°C for 168 h in hot air circulating oven)	-	-
Clauses 6.1, Table 1 (xv)(Resistance to low temperature [(-)30 ± 2°C] for 6 h)	-	-
Clauses 6.1, Table 1 (xvi)(Resistance to damage by flexing (after 100,000 cycle))	-	-
Clauses 6.1, Table 1 (xvii)(Blocking)	-	-
Clauses 6.1, Table 1 (xviii)(pH value of aqueous extract (Cold method))	-	-
Clauses 6.1, Table 1 (xix)(Water repellency (face side- uncoated), spray rating, Min)	-	-
Clauses 6.1, Table 1 (xx)(Hydrostatic pressure head test (Water column height at 60 cm for 60 min), (face side- uncoated))	-	-
Clauses 6.1, Table 1 (xxi)(Bundesmann-shower test (Double layers as used in the poncho- face side- uncoated), (Expose the specimen to the shower for 30 min): a) Amount of water absorption, Max, percent)	-	-
Clauses 6.1, Table 1 (xxi)(b) Amount of water penetration, ml 23514)	-	-
Clauses 6.1, Table 1 (xxi)(c) Wetting of inner surface)	-	-
Clauses 6.1, Table 1 (xxii)(Moisture vapour transmission, mg/cm2 /h, Min)	-	-
Clauses 6.1, Table 1 (xxiii)(Bending length, cm, Max: a) Warp-wise b) Weft-wise)	-	-
Clauses 6.1, Table 1 (xxiv)(Separation of polyurethane (PU) film)	-	-
Clause 6.2, Table 2 (i)(Nature of fibre/filament)	-	-
Clause 6.2, Table 2 (ii)(Length, cm)	-	-
Clause 6.2, Table 2 (iii)(Mass per linear metre, g)	-	-
Clause 6.2, Table 2 (iv)(Breaking strength (200 mm gauge length), N, Min)	-	-
Clause 6.2, Table 2 (v)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	-
Clause 6.2, Table 2 (vi)(Colour fastness to light)	-	-
Clause 6.2, Table 2 (vii)(Dimensional change due to relaxation, length wise directions, percent, Max)	-	-
Clause 6.2, Table 2 (viii)(pH value of aqueous extract (cold method))	-	-
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	-
Clause 6.3, Table 3 (ii)(Number of ends in full width, Min)	-	-
Clause 6.3, Table 3 (iii)(Number of picks/dm, Min)	-	-
Clause 6.3, Table 3 (iv)(Width, cm)	-	-
Clause 6.3, Table 3 (v)(Mass per linear metre, g)	-	-
Clause 6.3, Table 3 (vi)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	-
Clause 6.3, Table 3 (vii)(Colour fastness to light)	-	-
Clause 7(MARKING)	-	-
Clause 8(PACKING)	-	-
Clause 4(STITCHING)	-	-
Clause 4.1(Tolerances)	-	-
Clauses 6.4(Slide fastener)	-	-
Clauses 6.5(Hook and loop fastener)	-	-
Clauses 6.1, Table 1 (i)(Nature of fibre/filament)	-	-
Clauses 6.1, Table 1 (ii)(Nature of coating)	-	-
Clauses 6.1, Table 1 (iii)(Width, cm)	-	-
Clauses 6.1, Table 1 (iv)(End/dm, Min)	-	-
Clauses 6.1, Table 1 (v)(Picks/dm, Min)	-	-
Clauses 6.1, Table 1 (vi)(Mass (Single layer), g/sq. m)	-	-
Clauses 6.1, Table 1 (vii)(Mass of de-proofed fabric, g/sq. m)	-	-
Clauses 6.1, Table 1 (viii)(Breaking strength (strip test) (5 × 20 cm fabric between grips), N, Min: a) Warp-wise b) Weft-wise)	-	-
Clauses 6.1, Table 1 (ix)(Tearing strength (Method A-1), N, Min: a) Warp-wise b) Weft-wise)	-	-
Clauses 6.1, Table 1 (x)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	-
Clauses 6.1, Table 1 (xi)(Colour fastness to rubbing a) Dry b) Wet)	-	-
Clauses 6.1, Table 1 (xii)(Colour fastness to light)	-	-
Clauses 6.1, Table 1 (xiii)(Dimensional change due to relaxation, Max, percent: a) Warp-wise b) Weft-wise)	-	-
Clauses 6.1, Table 1 (xiv)(Resistance to accelerated ageing at 70°C ± 1°C for 168 h in hot air circulating oven)	-	-
Clauses 6.1, Table 1 (xv)(Resistance to low temperature [(-)30 ± 2°C] for 6 h)	-	-
Clauses 6.1, Table 1 (xvi)(Resistance to damage by flexing (after 100,000 cycle))	-	-
Clauses 6.1, Table 1 (xvii)(Blocking)	-	-
Clauses 6.1, Table 1 (xviii)(pH value of aqueous extract (Cold method))	-	-
Clauses 6.1, Table 1 (xix)(Water repellency (face side- uncoated), spray rating, Min)	-	-
Clauses 6.1, Table 1 (xx)(Hydrostatic pressure head test (Water column height at 60 cm for 60 min), (face side- uncoated))	-	-
Clauses 6.1, Table 1 (xxi)(Bundesmann-shower test (Double layers as used in the poncho- face side- uncoated), (Expose the specimen to the shower for 30 min): a) Amount of water absorption, Max, percent)	-	-
Clauses 6.1, Table 1 (xxi)(b) Amount of water penetration, ml 23514)	-	-
Clauses 6.1, Table 1 (xxi)(c) Wetting of inner surface)	-	-
Clauses 6.1, Table 1 (xxii)(Moisture vapour transmission, mg/cm2 /h, Min)	-	-
Clauses 6.1, Table 1 (xxiii)(Bending length, cm, Max: a) Warp-wise b) Weft-wise)	-	-
Clauses 6.1, Table 1 (xxiv)(Separation of polyurethane (PU) film)	-	-
Clause 6.2, Table 2 (i)(Nature of fibre/filament)	-	-
Clause 6.2, Table 2 (ii)(Length, cm)	-	-
Clause 6.2, Table 2 (iii)(Mass per linear metre, g)	-	-
Clause 6.2, Table 2 (iv)(Breaking strength (200 mm gauge length), N, Min)	-	-
Clause 6.2, Table 2 (v)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	-
Clause 6.2, Table 2 (vi)(Colour fastness to light)	-	-
Clause 6.2, Table 2 (vii)(Dimensional change due to relaxation, length wise directions, percent, Max)	-	-
Clause 6.2, Table 2 (viii)(pH value of aqueous extract (cold method))	-	-
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	-
Clause 6.3, Table 3 (ii)(Number of ends in full width, Min)	-	-
Clause 6.3, Table 3 (iii)(Number of picks/dm, Min)	-	-
Clause 6.3, Table 3 (iv)(Width, cm)	-	-
Clause 6.3, Table 3 (v)(Mass per linear metre, g)	-	-
Clause 6.3, Table 3 (vi)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	-
Clause 6.3, Table 3 (vii)(Colour fastness to light)	-	-
Clause 7(MARKING)	-	-
Clause 8(PACKING)	-	-
3(MATERIAL AND MANUFACTURE)	-	-
Clause 4(STITCHING)	-	-
Clause 4.1(Tolerances)	-	-
Clauses 6.4(Slide fastener)	-	-
Clauses 6.5(Hook and loop fastener)	-	-
Clauses 6.1, Table 1 (i)(Nature of fibre/filament)	-	-
Clauses 6.1, Table 1 (ii)(Nature of coating)	-	-
Clauses 6.1, Table 1 (iii)(Width, cm)	-	-
Clauses 6.1, Table 1 (iv)(End/dm, Min)	-	-
Clauses 6.1, Table 1 (v)(Picks/dm, Min)	-	-
Clauses 6.1, Table 1 (vi)(Mass (Single layer), g/sq. m)	-	-
Clauses 6.1, Table 1 (vii)(Mass of de-proofed fabric, g/sq. m)	-	-
Clauses 6.1, Table 1 (viii)(Breaking strength (strip test) (5 × 20 cm fabric between grips), N, Min: a) Warp-wise b) Weft-wise)	-	-
Clauses 6.1, Table 1 (ix)(Tearing strength (Method A-1), N, Min: a) Warp-wise b) Weft-wise)	-	-
Clauses 6.1, Table 1 (x)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	-
Clauses 6.1, Table 1 (xi)(Colour fastness to rubbing a) Dry b) Wet)	-	-
Clauses 6.1, Table 1 (xii)(Colour fastness to light)	-	-
Clauses 6.1, Table 1 (xiii)(Dimensional change due to relaxation, Max, percent: a) Warp-wise b) Weft-wise)	-	-
Clauses 6.1, Table 1 (xiv)(Resistance to accelerated ageing at 70°C ± 1°C for 168 h in hot air circulating oven)	-	-
Clauses 6.1, Table 1 (xv)(Resistance to low temperature [(-)30 ± 2°C] for 6 h)	-	-
Clauses 6.1, Table 1 (xvi)(Resistance to damage by flexing (after 100,000 cycle))	-	-
Clauses 6.1, Table 1 (xvii)(Blocking)	-	-
Clauses 6.1, Table 1 (xviii)(pH value of aqueous extract (Cold method))	-	-
Clauses 6.1, Table 1 (xix)(Water repellency (face side- uncoated), spray rating, Min)	-	-
Clauses 6.1, Table 1 (xx)(Hydrostatic pressure head test (Water column height at 60 cm for 60 min), (face side- uncoated))	-	-
Clauses 6.1, Table 1 (xxi)(Bundesmann-shower test (Double layers as used in the poncho- face side- uncoated), (Expose the specimen to the shower for 30 min): a) Amount of water absorption, Max, percent)	-	-
Clauses 6.1, Table 1 (xxi)(b) Amount of water penetration, ml 23514)	-	-
Clauses 6.1, Table 1 (xxi)(c) Wetting of inner surface)	-	-
Clauses 6.1, Table 1 (xxii)(Moisture vapour transmission, mg/cm2 /h, Min)	-	-
Clauses 6.1, Table 1 (xxiii)(Bending length, cm, Max: a) Warp-wise b) Weft-wise)	-	-
Clauses 6.1, Table 1 (xxiv)(Separation of polyurethane (PU) film)	-	-
Clause 6.2, Table 2 (i)(Nature of fibre/filament)	-	-
Clause 6.2, Table 2 (ii)(Length, cm)	-	-
Clause 6.2, Table 2 (iii)(Mass per linear metre, g)	-	-
Clause 6.2, Table 2 (iv)(Breaking strength (200 mm gauge length), N, Min)	-	-
Clause 6.2, Table 2 (v)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	-
Clause 6.2, Table 2 (vi)(Colour fastness to light)	-	-
Clause 6.2, Table 2 (vii)(Dimensional change due to relaxation, length wise directions, percent, Max)	-	-
Clause 6.2, Table 2 (viii)(pH value of aqueous extract (cold method))	-	-
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	-
Clause 6.3, Table 3 (ii)(Number of ends in full width, Min)	-	-
Clause 6.3, Table 3 (iii)(Number of picks/dm, Min)	-	-
Clause 6.3, Table 3 (iv)(Width, cm)	-	-
Clause 6.3, Table 3 (v)(Mass per linear metre, g)	-	-
Clause 6.3, Table 3 (vi)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	-
Clause 6.3, Table 3 (vii)(Colour fastness to light)	-	-
Clause 7(MARKING)	-	-
Clause 8(PACKING)	-	-
3(MATERIAL AND MANUFACTURE)	-	-
Clause 4(STITCHING)	-	-
Clause 4.1(Tolerances)	-	-
Clauses 6.4(Slide fastener)	-	-
Clauses 6.5(Hook and loop fastener)	-	-
Clauses 6.1, Table 1 (i)(Nature of fibre/filament)	-	-
Clauses 6.1, Table 1 (ii)(Nature of coating)	-	-
Clauses 6.1, Table 1 (iii)(Width, cm)	-	-
Clauses 6.1, Table 1 (iv)(End/dm, Min)	-	-
Clauses 6.1, Table 1 (v)(Picks/dm, Min)	-	-
Clauses 6.1, Table 1 (vi)(Mass (Single layer), g/sq. m)	-	-
Clauses 6.1, Table 1 (vii)(Mass of de-proofed fabric, g/sq. m)	-	-
Clauses 6.1, Table 1 (viii)(Breaking strength (strip test) (5 × 20 cm fabric between grips), N, Min: a) Warp-wise b) Weft-wise)	-	-
Clauses 6.1, Table 1 (ix)(Tearing strength (Method A-1), N, Min: a) Warp-wise b) Weft-wise)	-	-
Clauses 6.1, Table 1 (x)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	-
Clauses 6.1, Table 1 (xi)(Colour fastness to rubbing a) Dry b) Wet)	-	-
Clauses 6.1, Table 1 (xii)(Colour fastness to light)	-	-
Clauses 6.1, Table 1 (xiii)(Dimensional change due to relaxation, Max, percent: a) Warp-wise b) Weft-wise)	-	-
Clauses 6.1, Table 1 (xiv)(Resistance to accelerated ageing at 70°C ± 1°C for 168 h in hot air circulating oven)	-	-
Clauses 6.1, Table 1 (xv)(Resistance to low temperature [(-)30 ± 2°C] for 6 h)	-	-
Clauses 6.1, Table 1 (xvi)(Resistance to damage by flexing (after 100,000 cycle))	-	-
Clauses 6.1, Table 1 (xvii)(Blocking)	-	-
Clauses 6.1, Table 1 (xviii)(pH value of aqueous extract (Cold method))	-	-
Clauses 6.1, Table 1 (xix)(Water repellency (face side- uncoated), spray rating, Min)	-	-
Clauses 6.1, Table 1 (xx)(Hydrostatic pressure head test (Water column height at 60 cm for 60 min), (face side- uncoated))	-	-
Clauses 6.1, Table 1 (xxi)(Bundesmann-shower test (Double layers as used in the poncho- face side- uncoated), (Expose the specimen to the shower for 30 min): a) Amount of water absorption, Max, percent)	-	-
Clauses 6.1, Table 1 (xxi)(b) Amount of water penetration, ml 23514)	-	-
Clauses 6.1, Table 1 (xxi)(c) Wetting of inner surface)	-	-
Clauses 6.1, Table 1 (xxii)(Moisture vapour transmission, mg/cm2 /h, Min)	-	-
Clauses 6.1, Table 1 (xxiii)(Bending length, cm, Max: a) Warp-wise b) Weft-wise)	-	-
Clauses 6.1, Table 1 (xxiv)(Separation of polyurethane (PU) film)	-	-
Clause 6.2, Table 2 (i)(Nature of fibre/filament)	-	-
Clause 6.2, Table 2 (ii)(Length, cm)	-	-
Clause 6.2, Table 2 (iii)(Mass per linear metre, g)	-	-
Clause 6.2, Table 2 (iv)(Breaking strength (200 mm gauge length), N, Min)	-	-
Clause 6.2, Table 2 (v)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	-
Clause 6.2, Table 2 (vi)(Colour fastness to light)	-	-
Clause 6.2, Table 2 (vii)(Dimensional change due to relaxation, length wise directions, percent, Max)	-	-
Clause 6.2, Table 2 (viii)(pH value of aqueous extract (cold method))	-	-
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	-
Clause 6.3, Table 3 (ii)(Number of ends in full width, Min)	-	-
Clause 6.3, Table 3 (iii)(Number of picks/dm, Min)	-	-
Clause 6.3, Table 3 (iv)(Width, cm)	-	-
Clause 6.3, Table 3 (v)(Mass per linear metre, g)	-	-
Clause 6.3, Table 3 (vi)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	-
Clause 6.3, Table 3 (vii)(Colour fastness to light)	-	-
Clause 7(MARKING)	-	-
Clause 8(PACKING)	-	-
3(MATERIAL AND MANUFACTURE)	-	-
Clause 4(STITCHING)	-	-
Clause 4.1(Tolerances)	-	-
Clauses 6.4(Slide fastener)	-	-
Clauses 6.5(Hook and loop fastener)	-	-
Clauses 6.1, Table 1 (i)(Nature of fibre/filament)	-	-
Clauses 6.1, Table 1 (ii)(Nature of coating)	-	-
Clauses 6.1, Table 1 (iii)(Width, cm)	-	-
Clauses 6.1, Table 1 (iv)(End/dm, Min)	-	-
Clauses 6.1, Table 1 (v)(Picks/dm, Min)	-	-
Clauses 6.1, Table 1 (vi)(Mass (Single layer), g/sq. m)	-	-
Clauses 6.1, Table 1 (vii)(Mass of de-proofed fabric, g/sq. m)	-	-
Clauses 6.1, Table 1 (viii)(Breaking strength (strip test) (5 × 20 cm fabric between grips), N, Min: a) Warp-wise b) Weft-wise)	-	-
Clauses 6.1, Table 1 (ix)(Tearing strength (Method A-1), N, Min: a) Warp-wise b) Weft-wise)	-	-
Clauses 6.1, Table 1 (x)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	-
Clauses 6.1, Table 1 (xi)(Colour fastness to rubbing a) Dry b) Wet)	-	-
Clauses 6.1, Table 1 (xii)(Colour fastness to light)	-	-
Clauses 6.1, Table 1 (xiii)(Dimensional change due to relaxation, Max, percent: a) Warp-wise b) Weft-wise)	-	-
Clauses 6.1, Table 1 (xiv)(Resistance to accelerated ageing at 70°C ± 1°C for 168 h in hot air circulating oven)	-	-
Clauses 6.1, Table 1 (xv)(Resistance to low temperature [(-)30 ± 2°C] for 6 h)	-	-
Clauses 6.1, Table 1 (xvi)(Resistance to damage by flexing (after 100,000 cycle))	-	-
Clauses 6.1, Table 1 (xvii)(Blocking)	-	-
Clauses 6.1, Table 1 (xviii)(pH value of aqueous extract (Cold method))	-	-
Clauses 6.1, Table 1 (xix)(Water repellency (face side- uncoated), spray rating, Min)	-	-
Clauses 6.1, Table 1 (xx)(Hydrostatic pressure head test (Water column height at 60 cm for 60 min), (face side- uncoated))	-	-
Clauses 6.1, Table 1 (xxi)(Bundesmann-shower test (Double layers as used in the poncho- face side- uncoated), (Expose the specimen to the shower for 30 min): a) Amount of water absorption, Max, percent)	-	-
Clauses 6.1, Table 1 (xxi)(b) Amount of water penetration, ml 23514)	-	-
Clauses 6.1, Table 1 (xxi)(c) Wetting of inner surface)	-	-
Clauses 6.1, Table 1 (xxii)(Moisture vapour transmission, mg/cm2 /h, Min)	-	-
Clauses 6.1, Table 1 (xxiii)(Bending length, cm, Max: a) Warp-wise b) Weft-wise)	-	-
Clauses 6.1, Table 1 (xxiv)(Separation of polyurethane (PU) film)	-	-
Clause 6.2, Table 2 (i)(Nature of fibre/filament)	-	-
Clause 6.2, Table 2 (ii)(Length, cm)	-	-
Clause 6.2, Table 2 (iii)(Mass per linear metre, g)	-	-
Clause 6.2, Table 2 (iv)(Breaking strength (200 mm gauge length), N, Min)	-	-
Clause 6.2, Table 2 (v)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	-
Clause 6.2, Table 2 (vi)(Colour fastness to light)	-	-
Clause 6.2, Table 2 (vii)(Dimensional change due to relaxation, length wise directions, percent, Max)	-	-
Clause 6.2, Table 2 (viii)(pH value of aqueous extract (cold method))	-	-
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	-
Clause 6.3, Table 3 (ii)(Number of ends in full width, Min)	-	-
Clause 6.3, Table 3 (iii)(Number of picks/dm, Min)	-	-
Clause 6.3, Table 3 (iv)(Width, cm)	-	-
Clause 6.3, Table 3 (v)(Mass per linear metre, g)	-	-
Clause 6.3, Table 3 (vi)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	-
Clause 6.3, Table 3 (vii)(Colour fastness to light)	-	-
Clause 7(MARKING)	-	-
Clause 8(PACKING)	-	-
3(MATERIAL AND MANUFACTURE)	-	-

-
Included w.e.f 19.06.2025 Requirement for fasteners Cl 6.4, Cl 6.5

IS 3566 (2023)

TEXTILES - VISCOSE RAYON CUT STAPLE SPUN YARN - SPECIFICATION (SECOND REVISION)

7000 View breakup
-

Clause No.	Exclusion	Remark
4(GENERAL REQUIREMENTS)	-	-
5.1 Table 1 (i)(Count, Ne)	-	-
5.1 Table 1 (ii)(Count CV, percent, Max)	-	-
5.1 Table 1 (iii)(CSP, Min)	-	-
5.1 Table 1 (iv)(Lea breaking load CV, Percent, Max)	-	-
5.1Tble 1 (v)(Yarn tenacity, cN/tex, Min)	-	-
5.1 Table 1 (vi)(Breaking elongation, percent, Min)	-	-
5.1 Table 1 (vii)(Yarn tenacity CV percent, Max)	-	-
5.1Table 1 (viii)(Unevenness, percent Max)	-	-
5.1 Table 1 (ix)(Unevenness CV, percent, Max)	-	-
5.1 Table 1 (x)(Hairiness index, Max)	-	-
5.1 Table 1 (xi)(Imperfections/km, Max)	-	-
5.2 Table 2 (i)(Count, Ne)	-	-
5.2 Table 2 (ii)(Count CV, percent, Max)	-	-
5.2 Table 2 (iii)(Twist per meter)	-	-
5.2 Table 2 (iv)(CSP, Min)	-	-
5.2 Table 2 (v)(Lea breaking load CV, Percent, Max)	-	-
5.2 Table 2 (vi)(Yarn tenacity, cN/tex, Min)	-	-
5.2 Table 2(vii)(Yarn tenacity CV, percent, Max)	-	-
5.2 Table 2 (viii)(Breaking elongation percent, Min)	-	-
5.2 Table 2 (ix)(Unevenness, percent Max)	-	-
5.2 Table 2 (x)(Unevenness CV, percent, Max)	-	-
5.2 Table 2 (xi)(Hairiness index, Max)	-	-
5.2 Table 2(xii)(Imperfections/km, Max)	-	-
5.3.2(The average resultant count of the multifold yarn)	-	-
5.3.3(The lea breaking strength of multifold yarn)	-	-
5.3.4(The ply twist in the multifold yarn)	-	-
5.3.6(The requirement for hairiness index)	-	-
7(MARKING)	-	-
4(GENERAL REQUIREMENTS)	-	-
5.1 Table 1 (i)(Count, Ne)	-	-
5.1 Table 1 (ii)(Count CV, percent, Max)	-	-
5.1 Table 1 (iii)(CSP, Min)	-	-
5.1 Table 1 (iv)(Lea breaking load CV, Percent, Max)	-	-
5.1Tble 1 (v)(Yarn tenacity, cN/tex, Min)	-	-
5.1 Table 1 (vi)(Breaking elongation, percent, Min)	-	-
5.1 Table 1 (vii)(Yarn tenacity CV percent, Max)	-	-
5.1Table 1 (viii)(Unevenness, percent Max)	-	-
5.1 Table 1 (ix)(Unevenness CV, percent, Max)	-	-
5.1 Table 1 (x)(Hairiness index, Max)	-	-
5.1 Table 1 (xi)(Imperfections/km, Max)	-	-
5.2 Table 2 (i)(Count, Ne)	-	-
5.2 Table 2 (ii)(Count CV, percent, Max)	-	-
5.2 Table 2 (iii)(Twist per meter)	-	-
5.2 Table 2 (iv)(CSP, Min)	-	-
5.2 Table 2 (v)(Lea breaking load CV, Percent, Max)	-	-
5.2 Table 2 (vi)(Yarn tenacity, cN/tex, Min)	-	-
5.2 Table 2(vii)(Yarn tenacity CV, percent, Max)	-	-
5.2 Table 2 (viii)(Breaking elongation percent, Min)	-	-
5.2 Table 2 (ix)(Unevenness, percent Max)	-	-
5.2 Table 2 (x)(Unevenness CV, percent, Max)	-	-
5.2 Table 2 (xi)(Hairiness index, Max)	-	-
5.2 Table 2(xii)(Imperfections/km, Max)	-	-
5.3.2(The average resultant count of the multifold yarn)	-	-
5.3.3(The lea breaking strength of multifold yarn)	-	-
5.3.4(The ply twist in the multifold yarn)	-	-
5.3.6(The requirement for hairiness index)	-	-
7(MARKING)	-	-

-
-

IS 16725 (2018)

Textiles - Tactical 3 points sling universal - Specification

60500 View breakup
-

Clause No.	Exclusion	Remark
Clause 3.2.2 & Table 2 (i)(Nature of filament)	-	-
Clause 3.2.2 & Table 2 (ii)(Width, mm)	-	-
Clause 3.2.2 & Table 2 (iii)(Mass per linear meter of tape, g)	-	-
Clause 3.2.2 & Table 2 (iv)(Breaking strength (full width × 20 cm), N, Min)	-	-
Clause 3.2.2 & Table 2 (v)(Colour fastness to light)	-	-
Clause 3.2.2 & Table 2 (vi)(Colour fastness to rubbing: (a) Dry & (b) Wet)	-	-
Clause 3.2.2 & Table 2 (vii)(Colour fastness to washing C(3) (a) Change in colour)	-	-
Clause 3.2.2 & Table 2 (viii)(Colour fastness to washing C(3) (b) Staining on adjacent fabric)	-	-
Clause 3.2.2 & Table 2 (ix)(Dimensional change due to relaxation, both directions, percent, Max)	-	-
Clause 3.2.2 & Table 2 (x)(pH value of aqueous extract (Cold method))	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (a) Nature of filament yarn)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): ( b) End/dm, Min)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (c) Picks/dm, Min)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (d) Width, mm)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (e) Mass, g/sq. m)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (f) Colour fastness to washing C(3): (1) Change in colour)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (f) Colour fastness to washing C(3): (2) Staining on adjacent fabric)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (g) Colour fastness to rubbing: (1) Dry & (2) Wet)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (h) Colour fastness to light)	-	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (a) Nature of filament yarn)	-	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (b) Width, mm)	-	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (c) Mass per linear meter, g)	-	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (d) Colour fastness to washing C(3): (1) Change in colour)	-	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (d) Colour fastness to washing C(3): (2) Staining on adjacent fabric)	-	-
Clause 3.2.3 & Table 4 (ii)("Bottom layer (Nylon Tape – 50 mm wide): (e) Colour fastness to rubbing: 1) Dry 2) Wet ")	-	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (f) Colour fastness to light)	-	-
Clause 4(STITCHING)	-	-
Clause 5(WORKMANSHIP AND FINISH)	-	-
Clause 7(MARKING)	-	-
Clause 8(PACKING)	-	-
3.2.1 - Table 1 - (i)(Warp)	-	-
3.2.1 - Table 1 - (ii)(Weft)	-	-
3.2.1 - Table 1 - (ii)(Weft)	-	-
3.2.1 - Table 1 - (iii)(Binding end)	-	-
3.2.2 - Table 2 -(i)(Name of Filament)	-	-
3.2.2 - Table 2 -(ii)(Width)	-	-
3.2.2 - Table 2 -(iii)(Mass per linear meter)	-	-
3.2.2 - Table 2 -(iv)(Breaking strength)	-	-
3.2.2 - Table 2 -(v)(Colour fastness to light)	-	-
3.2.2 - Table 2 -(vi)(Colour fastness to rubbing)	-	-
3.2.2 - Table 2 -(vii)(Colour fastness to washing)	-	-
3.2.2 - Table 2 -(viii)(Dimensional change due to relaxation)	-	-
3.2.2 - Table 2 -(ix)(ph value of aqueous extract)	-	-
3.2.3 - Table 3 - (i)(Warp)	-	-
3.2.3 - Table 3 - (ii)(Weft)	-	-
3.2.3 - Table 3 - (iii)(Blinding end)	-	-
3.2.3 - Table 4 - (i) - (a)(Nature of filament yarn)	-	-
3.2.3 - Table 4 - (i) - (b)(End/ dm)	-	-
3.2.3 - Table 4 - (i) - (c)(Picks/dm)	-	-
3.2.3 - Table 4 - (i) - (d)(Width)	-	-
3.2.3 - Table 4 - (i) - (e)(Mass gram per meter square)	-	-
3.2.3 - Table 4 - (i) - (f)(Colour fastness to washing)	-	-
3.2.3 - Table 4 - (i) - (g)(Colour fastness to rubbing)	-	-
3.2.3 - Table 4 - (i) - (h)(Colour fastness to light)	-	-
3.2.3 - Table 4 - (ii) - (a)(Nature of filament yarn)	-	-
3.2.3 - Table 4 - (ii) - (b)(Width)	-	-
3.2.3 - Table 4 - (ii) - (c)(Mass per linear meter)	-	-
3.2.3 - Table 4 - (ii) - (d)(Colour fastness to washing)	-	-
3.2.3 - Table 4 - (ii) - (e)(Colour fastness to rubbing)	-	-
3.2.3 - Table 4 - (ii) - (f)(Colour fastness to light)	-	-
5(Workmanship and finish)	-	-
7(Marking)	-	-
8(Packing)	-	-
3.2.4(Dimensions)	-	-
3.2.5(metallic parts)	-	-
3.2.3 - Table 4 - (ii) - (c)(Mass per linear meter)	-	-
3.2.3 - Table 4 - (ii) - (c)(Width)	-	-
Clause 3.2.2 & Table 2 (i)(Nature of filament)	-	-
Clause 3.2.2 & Table 2 (ii)(Width, mm)	-	-
Clause 3.2.2 & Table 2 (iii)(Mass per linear meter of tape, g)	-	-
Clause 3.2.2 & Table 2 (iv)(Breaking strength (full width × 20 cm), N, Min)	-	-
Clause 3.2.2 & Table 2 (v)(Colour fastness to light)	-	-
Clause 3.2.2 & Table 2 (vi)(Colour fastness to rubbing: (a) Dry & (b) Wet)	-	-
Clause 3.2.2 & Table 2 (vii)(Colour fastness to washing C(3) (a) Change in colour)	-	-
Clause 3.2.2 & Table 2 (viii)(Colour fastness to washing C(3) (b) Staining on adjacent fabric)	-	-
Clause 3.2.2 & Table 2 (ix)(Dimensional change due to relaxation, both directions, percent, Max)	-	-
Clause 3.2.2 & Table 2 (x)(pH value of aqueous extract (Cold method))	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (a) Nature of filament yarn)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): ( b) End/dm, Min)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (c) Picks/dm, Min)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (d) Width, mm)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (e) Mass, g/sq. m)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (f) Colour fastness to washing C(3): (1) Change in colour)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (f) Colour fastness to washing C(3): (2) Staining on adjacent fabric)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (g) Colour fastness to rubbing: (1) Dry & (2) Wet)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (h) Colour fastness to light)	-	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (a) Nature of filament yarn)	-	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (b) Width, mm)	-	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (c) Mass per linear meter, g)	-	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (d) Colour fastness to washing C(3): (1) Change in colour)	-	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (d) Colour fastness to washing C(3): (2) Staining on adjacent fabric)	-	-
Clause 3.2.3 & Table 4 (ii)("Bottom layer (Nylon Tape – 50 mm wide): (e) Colour fastness to rubbing: 1) Dry 2) Wet ")	-	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (f) Colour fastness to light)	-	-
Clause 4(STITCHING)	-	-
Clause 5(WORKMANSHIP AND FINISH)	-	-
Clause 7(MARKING)	-	-
Clause 8(PACKING)	-	-
3.2.1 - Table 1 - (i)(Warp)	-	-
3.2.1 - Table 1 - (ii)(Weft)	-	-
3.2.1 - Table 1 - (ii)(Weft)	-	-
3.2.1 - Table 1 - (iii)(Binding end)	-	-
3.2.2 - Table 2 -(i)(Name of Filament)	-	-
3.2.2 - Table 2 -(ii)(Width)	-	-
3.2.2 - Table 2 -(iii)(Mass per linear meter)	-	-
3.2.2 - Table 2 -(iv)(Breaking strength)	-	-
3.2.2 - Table 2 -(v)(Colour fastness to light)	-	-
3.2.2 - Table 2 -(vi)(Colour fastness to rubbing)	-	-
3.2.2 - Table 2 -(vii)(Colour fastness to washing)	-	-
3.2.2 - Table 2 -(viii)(Dimensional change due to relaxation)	-	-
3.2.2 - Table 2 -(ix)(ph value of aqueous extract)	-	-
3.2.3 - Table 3 - (i)(Warp)	-	-
3.2.3 - Table 3 - (ii)(Weft)	-	-
3.2.3 - Table 3 - (iii)(Blinding end)	-	-
3.2.3 - Table 4 - (i) - (a)(Nature of filament yarn)	-	-
3.2.3 - Table 4 - (i) - (b)(End/ dm)	-	-
3.2.3 - Table 4 - (i) - (c)(Picks/dm)	-	-
3.2.3 - Table 4 - (i) - (d)(Width)	-	-
3.2.3 - Table 4 - (i) - (e)(Mass gram per meter square)	-	-
3.2.3 - Table 4 - (i) - (f)(Colour fastness to washing)	-	-
3.2.3 - Table 4 - (i) - (g)(Colour fastness to rubbing)	-	-
3.2.3 - Table 4 - (i) - (h)(Colour fastness to light)	-	-
3.2.3 - Table 4 - (ii) - (a)(Nature of filament yarn)	-	-
3.2.3 - Table 4 - (ii) - (b)(Width)	-	-
3.2.3 - Table 4 - (ii) - (c)(Mass per linear meter)	-	-
3.2.3 - Table 4 - (ii) - (d)(Colour fastness to washing)	-	-
3.2.3 - Table 4 - (ii) - (e)(Colour fastness to rubbing)	-	-
3.2.3 - Table 4 - (ii) - (f)(Colour fastness to light)	-	-
5(Workmanship and finish)	-	-
7(Marking)	-	-
8(Packing)	-	-
3.2.4(Dimensions)	-	-
3.2.5(metallic parts)	-	-
3.2.3 - Table 4 - (ii) - (c)(Mass per linear meter)	-	-
3.2.3 - Table 4 - (ii) - (c)(Width)	-	-
Clause 3.2.2 & Table 2 (i)(Nature of filament)	-	-
Clause 3.2.2 & Table 2 (ii)(Width, mm)	-	-
Clause 3.2.2 & Table 2 (iii)(Mass per linear meter of tape, g)	-	-
Clause 3.2.2 & Table 2 (iv)(Breaking strength (full width × 20 cm), N, Min)	-	-
Clause 3.2.2 & Table 2 (v)(Colour fastness to light)	-	-
Clause 3.2.2 & Table 2 (vi)(Colour fastness to rubbing: (a) Dry & (b) Wet)	-	-
Clause 3.2.2 & Table 2 (vii)(Colour fastness to washing C(3) (a) Change in colour)	-	-
Clause 3.2.2 & Table 2 (viii)(Colour fastness to washing C(3) (b) Staining on adjacent fabric)	-	-
Clause 3.2.2 & Table 2 (ix)(Dimensional change due to relaxation, both directions, percent, Max)	-	-
Clause 3.2.2 & Table 2 (x)(pH value of aqueous extract (Cold method))	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (a) Nature of filament yarn)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): ( b) End/dm, Min)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (c) Picks/dm, Min)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (d) Width, mm)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (e) Mass, g/sq. m)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (f) Colour fastness to washing C(3): (1) Change in colour)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (f) Colour fastness to washing C(3): (2) Staining on adjacent fabric)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (g) Colour fastness to rubbing: (1) Dry & (2) Wet)	-	-
Clause 3.2.3 & Table 4 (i)(Top layer (Disruptive printed): (h) Colour fastness to light)	-	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (a) Nature of filament yarn)	-	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (b) Width, mm)	-	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (c) Mass per linear meter, g)	-	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (d) Colour fastness to washing C(3): (1) Change in colour)	-	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (d) Colour fastness to washing C(3): (2) Staining on adjacent fabric)	-	-
Clause 3.2.3 & Table 4 (ii)("Bottom layer (Nylon Tape – 50 mm wide): (e) Colour fastness to rubbing: 1) Dry 2) Wet ")	-	-
Clause 3.2.3 & Table 4 (ii)(Bottom layer (Nylon Tape – 50 mm wide): (f) Colour fastness to light)	-	-
Clause 4(STITCHING)	-	-
Clause 5(WORKMANSHIP AND FINISH)	-	-
Clause 7(MARKING)	-	-
Clause 8(PACKING)	-	-
3.2.1 - Table 1 - (i)(Warp)	-	-
3.2.1 - Table 1 - (ii)(Weft)	-	-
3.2.1 - Table 1 - (ii)(Weft)	-	-
3.2.1 - Table 1 - (iii)(Binding end)	-	-
3.2.2 - Table 2 -(i)(Name of Filament)	-	-
3.2.2 - Table 2 -(ii)(Width)	-	-
3.2.2 - Table 2 -(iii)(Mass per linear meter)	-	-
3.2.2 - Table 2 -(iv)(Breaking strength)	-	-
3.2.2 - Table 2 -(v)(Colour fastness to light)	-	-
3.2.2 - Table 2 -(vi)(Colour fastness to rubbing)	-	-
3.2.2 - Table 2 -(vii)(Colour fastness to washing)	-	-
3.2.2 - Table 2 -(viii)(Dimensional change due to relaxation)	-	-
3.2.2 - Table 2 -(ix)(ph value of aqueous extract)	-	-
3.2.3 - Table 3 - (i)(Warp)	-	-
3.2.3 - Table 3 - (ii)(Weft)	-	-
3.2.3 - Table 3 - (iii)(Blinding end)	-	-
3.2.3 - Table 4 - (i) - (a)(Nature of filament yarn)	-	-
3.2.3 - Table 4 - (i) - (b)(End/ dm)	-	-
3.2.3 - Table 4 - (i) - (c)(Picks/dm)	-	-
3.2.3 - Table 4 - (i) - (d)(Width)	-	-
3.2.3 - Table 4 - (i) - (e)(Mass gram per meter square)	-	-
3.2.3 - Table 4 - (i) - (f)(Colour fastness to washing)	-	-
3.2.3 - Table 4 - (i) - (g)(Colour fastness to rubbing)	-	-
3.2.3 - Table 4 - (i) - (h)(Colour fastness to light)	-	-
3.2.3 - Table 4 - (ii) - (a)(Nature of filament yarn)	-	-
3.2.3 - Table 4 - (ii) - (b)(Width)	-	-
3.2.3 - Table 4 - (ii) - (c)(Mass per linear meter)	-	-
3.2.3 - Table 4 - (ii) - (d)(Colour fastness to washing)	-	-
3.2.3 - Table 4 - (ii) - (e)(Colour fastness to rubbing)	-	-
3.2.3 - Table 4 - (ii) - (f)(Colour fastness to light)	-	-
5(Workmanship and finish)	-	-
7(Marking)	-	-
8(Packing)	-	-
3.2.4(Dimensions)	-	-
3.2.5(metallic parts)	-	-
3.2.3 - Table 4 - (ii) - (c)(Mass per linear meter)	-	-
Cl-3.2.3(Dyes used for dyeing and printing)	-	-
3.2.3 - Table 4 - (ii) - (c)(Width)	-	-

-
-

IS 16655 (2017)

Textiles - Protective clothing for use in welding and allied processes

35000 View breakup
-

Clause No.	Exclusion	Remark
6.2 & Table 3(Tensile strength)	-	-
6.3 & Table 3(Tear strength)	-	-
6.4 & Table 3(Burst strength of knitted materials and seams)	-	-
6.5 & Table 3(Seam strength)	-	-
6.6 & Table 3(Dimensional change of textile materials)	-	-
6.7 & Table 3(Limited flame spread)	-	-
6.8 & Table 3(Impact of spatter (small splashes of molten metal))	-	-
6.9 & Table 3(Heat transfer (radiation))	-	-
6.10 & Table 3(Electrical resistance)	-	-
7(Marking)	-	-
4.1(General)	-	-
4.2(Protective clothing)	-	-
4.3(Size designation and fit)	-	-
4.4(Additional protective garments)	-	-
4.5(Pockets and flap closures)	-	-
4.6(Closures and seams)	-	-
4.7(Hardware)	-	-
6.1(Classification)	-	-
6.2(Tensile Strength)	-	-
6.3(Textiles - Protective Clothing for Use in Welding and Allied Processes)	-	-
6.4(Textiles - Protective Clothing for Use in Welding and Allied Processes)	-	-
6.5(Seam Strength)	-	-
6.6(Dimensional change of textile materials)	-	-
6.7.2.1 - Table 1(Limited flame spread performance)	-	-
6.8(Impact of spatter)	-	-
6.9(Heat transfer)	-	-
6.1(Electricity resistance)	-	-
7(Marking)	-	-
Clause-4.1(General requirements)	-	-
Clause-4.3(Size designation and fit)	-	-
Clause-6.1(Classification)	-	-
Clause-6.2(Tensile strength)	-	-
Clause-6.3(Tear strength)	-	-
Clause-6.4(Burst strength of knitted material)	-	-
Clause-6.5(Seam strength)	-	-
Clause-7(Marking)	-	-
4(Garment Design)	-	-
5.2("Pre-treatment/cleaning: 5 wash cycles as per ISO 6330 procedure 2A followed by Tumble dry delicate (A wash cycle is one wash and one drying). ")	-	-
6.2(Tensile Strength)	-	-
6.3(Tear Strength)	-	-
6.4(Bursting Strength (knitted materials))	-	-
6.5(Seam Strength)	-	-
6.6(Dimensional Change)	-	-
6.7.2("Limited Flame Spread (Face ignition) (Before and after pre-treatment) ")	-	-
6.7.3(Limited Flame Spread (Edge ignition) (Before and after pre-treatment))	-	-
6.8("Impact of Spatter (After Pre-treatment) ")	-	-
6.9(Heat transfer (radiation) (After Pre-treatment))	-	-
6.10("Electrical Resistance (After Pre-treatment) ")	-	-
6.2 & Table 3(Tensile strength)	-	-
6.3 & Table 3(Tear strength)	-	-
6.4 & Table 3(Burst strength of knitted materials and seams)	-	-
6.5 & Table 3(Seam strength)	-	-
6.6 & Table 3(Dimensional change of textile materials)	-	-
6.7 & Table 3(Limited flame spread)	-	-
6.8 & Table 3(Impact of spatter (small splashes of molten metal))	-	-
6.9 & Table 3(Heat transfer (radiation))	-	-
6.10 & Table 3(Electrical resistance)	-	-
7(Marking)	-	-
4.1(General)	-	-
4.2(Protective clothing)	-	-
4.3(Size designation and fit)	-	-
4.4(Additional protective garments)	-	-
4.5(Pockets and flap closures)	-	-
4.6(Closures and seams)	-	-
4.7(Hardware)	-	-
6.1(Classification)	-	-
6.2(Tensile Strength)	-	-
6.3(Textiles - Protective Clothing for Use in Welding and Allied Processes)	-	-
6.4(Textiles - Protective Clothing for Use in Welding and Allied Processes)	-	-
6.5(Seam Strength)	-	-
6.6(Dimensional change of textile materials)	-	-
6.7.2.1 - Table 1(Limited flame spread performance)	-	-
6.8(Impact of spatter)	-	-
6.9(Heat transfer)	-	-
6.1(Electricity resistance)	-	-
7(Marking)	-	-
Clause-4.1(General requirements)	-	-
Clause-4.3(Size designation and fit)	-	-
Clause-6.1(Classification)	-	-
Clause-6.2(Tensile strength)	-	-
Clause-6.3(Tear strength)	-	-
Clause-6.4(Burst strength of knitted material)	-	-
Clause-6.5(Seam strength)	-	-
Clause-7(Marking)	-	-
4(Garment Design)	-	-
5.2("Pre-treatment/cleaning: 5 wash cycles as per ISO 6330 procedure 2A followed by Tumble dry delicate (A wash cycle is one wash and one drying). ")	-	-
6.2(Tensile Strength)	-	-
6.3(Tear Strength)	-	-
6.4(Bursting Strength (knitted materials))	-	-
6.5(Seam Strength)	-	-
6.6(Dimensional Change)	-	-
6.7.2("Limited Flame Spread (Face ignition) (Before and after pre-treatment) ")	-	-
6.7.3(Limited Flame Spread (Edge ignition) (Before and after pre-treatment))	-	-
6.8("Impact of Spatter (After Pre-treatment) ")	-	-
6.9(Heat transfer (radiation) (After Pre-treatment))	-	-
6.10("Electrical Resistance (After Pre-treatment) ")	-	-
6.11 & Table 3(Fat content of leather)	-	-
6.11(Fat content of leather)	-	-
6.11(Fat content of leather)	-	-
6.2 & Table 3(Tensile strength)	-	-
6.3 & Table 3(Tear strength)	-	-
6.4 & Table 3(Burst strength of knitted materials and seams)	-	-
6.5 & Table 3(Seam strength)	-	-
6.6 & Table 3(Dimensional change of textile materials)	-	-
6.7 & Table 3(Limited flame spread)	-	-
6.8 & Table 3(Impact of spatter (small splashes of molten metal))	-	-
6.9 & Table 3(Heat transfer (radiation))	-	-
6.10 & Table 3(Electrical resistance)	-	-
7(Marking)	-	-
4.1(General)	-	-
4.2(Protective clothing)	-	-
4.3(Size designation and fit)	-	-
4.4(Additional protective garments)	-	-
4.5(Pockets and flap closures)	-	-
4.6(Closures and seams)	-	-
4.7(Hardware)	-	-
6.1(Classification)	-	-
6.2(Tensile Strength)	-	-
6.3(Textiles - Protective Clothing for Use in Welding and Allied Processes)	-	-
6.4(Textiles - Protective Clothing for Use in Welding and Allied Processes)	-	-
6.5(Seam Strength)	-	-
6.6(Dimensional change of textile materials)	-	-
6.7.2.1 - Table 1(Limited flame spread performance)	-	-
6.8(Impact of spatter)	-	-
6.9(Heat transfer)	-	-
6.1(Electricity resistance)	-	-
7(Marking)	-	-
Clause-4.1(General requirements)	-	-
Clause-4.3(Size designation and fit)	-	-
Clause-6.1(Classification)	-	-
Clause-6.2(Tensile strength)	-	-
Clause-6.3(Tear strength)	-	-
Clause-6.4(Burst strength of knitted material)	-	-
Clause-6.5(Seam strength)	-	-
Clause-7(Marking)	-	-
4(Garment Design)	-	-
5.2("Pre-treatment/cleaning: 5 wash cycles as per ISO 6330 procedure 2A followed by Tumble dry delicate (A wash cycle is one wash and one drying). ")	-	-
6.2(Tensile Strength)	-	-
6.3(Tear Strength)	-	-
6.4(Bursting Strength (knitted materials))	-	-
6.5(Seam Strength)	-	-
6.6(Dimensional Change)	-	-
6.7.2("Limited Flame Spread (Face ignition) (Before and after pre-treatment) ")	-	-
6.7.3(Limited Flame Spread (Edge ignition) (Before and after pre-treatment))	-	-
6.8("Impact of Spatter (After Pre-treatment) ")	-	-
6.9(Heat transfer (radiation) (After Pre-treatment))	-	-
6.10("Electrical Resistance (After Pre-treatment) ")	-	-
6.11 & Table 3(Fat content of leather)	-	-
6.11(Fat content of leather)	-	-
6.11(Fat content of leather)	-	-

-
-

IS 863 (2023)

Medical Textiles - Cotton bandage cloth - Specification third revision of IS 863

6608.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2, Table 1, iii)(Mass, g/m2)	-	0	-
4.2, Table 1, v)(Width, m, tolerance)	-	0	-
4.2, Table 1, vi)(pH value of acqueous extract)	-	0	-
4.2, Table 1, ix)(Colour fastness: a) Light)	-	0	-
4.2, Table 1, ix)(Colour fastness: b) Washing (A1))	-	0	-
4.2, Table 1, vii)(Scouring loss, percent, Max)	-	0	-
4.1(Fibre Identification)	-	0	-
4.2, Table 1, i)(Count of yarn (for guidance only))	-	0	-
4.2, Table 1, ii)(Threads, dm, Min)	-	0	-
4.2, Table 1, iv)(Length, m, tolerance)	-	0	-
4.2, Table 1, viii)(Freedom from optical whiteners)	-	0	-
4.2, Table 1, x)(Sterility (optional))	-	0	-
4.2, Table 1, iii)(Mass, g/m2)	-	0	-
4.2, Table 1, v)(Width, m, tolerance)	-	0	-
4.2, Table 1, vi)(pH value of acqueous extract)	-	0	-
4.2, Table 1, ix)(Colour fastness: a) Light)	-	0	-
4.2, Table 1, ix)(Colour fastness: b) Washing (A1))	-	0	-
4.2, Table 1, vii)(Scouring loss, percent, Max)	-	0	-
4.1(Fibre Identification)	-	0	-
4.2, Table 1, i)(Count of yarn (for guidance only))	-	0	-
4.2, Table 1, ii)(Threads, dm, Min)	-	0	-
4.2, Table 1, iv)(Length, m, tolerance)	-	0	-
4.2, Table 1, viii)(Freedom from optical whiteners)	-	0	-
4.2, Table 1, x)(Sterility (optional))	-	0	-
6(Marking)	-	0	-
4.2, Table 1, iii)(Mass, g/m2)	-	-	-
4.2, Table 1, v)(Width, m, tolerance)	-	-	-
4.2, Table 1, vi)(pH value of acqueous extract)	-	-	-
4.2, Table 1, ix)(Colour fastness: a) Light)	-	-	-
4.2, Table 1, ix)(Colour fastness: b) Washing (A1))	-	-	-
4.2, Table 1, vii)(Scouring loss, percent, Max)	-	-	-
4.1(Fibre Identification)	-	-	-
4.2, Table 1, i)(Count of yarn (for guidance only))	-	-	-
4.2, Table 1, ii)(Threads, dm, Min)	-	-	-
4.2, Table 1, iv)(Length, m, tolerance)	-	-	-
4.2, Table 1, viii)(Freedom from optical whiteners)	-	-	-
6(Marking)	-	-	-

-
-

IS 15742 (2007)

Textiles - Requirements for clothing made of limited flame spread materials and material assemblies affording protection against heat and flame - Specification

25000.00 View breakup
-

Clause No.	Exclusion	Remark
6.2.1("(i) Cleansing procedure: 5 wash cycles as per IS 15370-6 A (40±3ºC) (A wash cycle is one wash and one drying). ")	-	-
6.2.1((i)12 wash cycles of one of the standard cleaning procedure)	-	-
6.2.2(five dry cleaning cycles)	-	-
7.1("Limited Flame Spread [IS 15758: 2007 (Part 4) ( Surface Ignition ) – Index-1 Before treatment After Pre-treatment ")	-	-
7.2("Limited Flame Spread [IS 15758: 2007 (Part 4) Procedure –A ( Surface Ignition ) – Limited Flame Spread Index-2 • Before treatment • After Pre-treatment as per clause 6.2.1 or 6.2.2 ")	-	-
7.3("Limited Flame Spread [IS 15758: 2007 (Part 4) Procedure –A ( Surface Ignition ) – Limited Flame Spread Index-3 • Before treatment • After Pre-treatment as per clause 6.2.1 or 6.2.2 ")	-	-

-
-

IS 8156 (2014)

Fastners for consumer goods - Synthetic hook and loop tape - Specification (Third Revision)

9300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material Indentification)	-	0	-
5.1(Dimensions)	-	0	-
7.1(Colour Fastness)	-	800	-
7.2(Strength of Tapes (Test for Shear,Peel and Tensile Strength))	-	800	-
7.3(Shrinkage)	-	500	-
7.4(Endurance Test)	-	0	-
7.5(Dot Tear Test)	-	800	-

-
-

IS 17423 (2021)

Medical Textiles Bio-Protective Coveralls Specification (First Revision)

10620.00 View breakup
-

Clause No.	Exclusion	Remark
Cl- 4.4, 5.2, 5.3, 5.4, 5.5 and 7.1, Table-1 (i)(Resistance to penetration by blood and body fluids (synthetic blood penetration resistance), procedure d (see note 1))	Table 1 (ix) Biocompatibility evaluation	-
Cl- 4.4, 5.2, 5.3, 5.4, 5.5 and 7.1, Table-1, (ii)(Resistance to penetration by blood borne pathognes (resistance to viral penetration), procedure d (see note 1))	Table 1 (ix) Biocompatibility evaluation	-
Cl- 4.4, 5.2, 5.3, 5.4, 5.5 and 7.1, Table-1 (iii)(Breathability (water vapour transmission rate), g/m2/day, Max)	Table 1 (ix) Biocompatibility evaluation	-
Cl- 4.4, 5.2, 5.3, 5.4, 5.5 and 7.1, Table-1 (iv)(Tensile strength (dry and wet) (N))	Table 1 (ix) Biocompatibility evaluation	-
Cl- 4.4, 5.2, 5.3, 5.4, 5.5 and 7.1, Table-1 (v)(Seam strength (dry and wet) (N) (see note 2))	Table 1 (ix) Biocompatibility evaluation	-
Cl- 4.4, 5.2, 5.3, 5.4, 5.5 and 7.1 Table-1 (vi)(Bursting strength (dry and wet) (kPa))	Table 1 (ix) Biocompatibility evaluation	-
Cl- 4.4, 5.2, 5.3, 5.4, 5.5 and 7.1, Table-1 (vii)(Cleanliness-microbial (CFU/100 cm2))	Table 1 (ix) Biocompatibility evaluation	-
Cl- 4.4, 5.2, 5.3, 5.4, 5.5 and 7.1, Table-1 (viii)(Resistance to dry microbial penetration ,(log cfu) (At challenge concentration 108 CFU/g talcum and 30 min vibration time))	Table 1 (ix) Biocompatibility evaluation	-

-
-

IS 15748 (2022)

Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (first revision)

48498.00 View breakup
-

Clause No.	Exclusion	Remark
6.2.1(Heat resistance)	-	-
6.4(Dimensional change of textile materials)	-	-
7(Heat Transmission Performance Requirements)	-	-
8(Summary of flame and heat transmission tests and corresponding letter codes (see Table 8))	-	-

-
-

IS 17051 (2018)

Textiles - Bullet resistant jackets - Performance requirements

34456.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 2 iii)(Flame Resistance Test)	-	34456.00		-

-
For Table 2 iii)(Flame Resistance Test) only

IS 16890 (2018)

Textiles - Protective clothing for firefighters - Specification

48950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5.1 Table-2, Cl.D-2(Permissible No. of Defectives)	-	0.02		-
Cl.5.1 Table-2, Cl.D-2(Sample Size (No. of Protective Clothing))	-	2000		-

-
-

IS 17423 (2020)

Medical textiles – Coveralls for COVID 19 – Specification

Medical Textiles - Coveralls for COVID-19 for Single Us

10620 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 1)	-	5310	-
4.1(Manufacture - IS 17423)	-	0.0	-
4.2(Manufacture - IS 17423)	-	0	-
4.3(Manufacture - IS 17423)	-	0	-
4.4(Manufacture - IS 17423)	-	0	-
4.5(Manufacture - IS 17423)	-	0	-
4.6(Manufacture - IS 17423)	-	0	-
5.1(Workmanship and Finish - IS 17423)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 3)	-	5310	-
4.1.1(Manufacture - IS 17423)	-	0	-
4.2(Manufacture - IS 17423)	-	0	-
4.2(Manufacture - IS 17423)	-	0	-
4.3(Manufacture - IS 17423)	-	0	-
4.4(Manufacture - IS 17423)	-	0	-
5.1(Workmanship and Finish - IS 17423)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 2)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 3)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 1)	-	0	-
4.1.1(Manufacture - IS 17423)	-	0	-
4.4(Manufacture - IS 17423)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 2)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 1)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 2)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 3)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 1)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 2)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 3)	-	0	-

-
-

IS 1 (1968)

Specification for the national flag of India (Cotton khadi) (second revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 3.2.1(Cotton Khadi Duck :- used for the sleeve of the flag. Yarn -The yarn used in the manufacture of duck shall be handspun from clean carded cotton. The approximate count of yarn for warpand weft shall be 38 tex x 3 (or Nm 26/3).)	-	18000		-

-
-

IS 758 (1988)

Specification for cotton gauze, absorbent, non-sterilized (fourth revision)

- View breakup
Rs.3300/- Plus 18% GST

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
(Lab of national repute and eminence, facilities of which are being utilized by BIS.)

IS 15741 (2007)

Textiles - Resistance to ignition of curtains and drapes - Specification

- View breakup
Rs.62000/- Plus 18% GST

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
(Lab of national repute and eminence, facilities of which are being utilized by BIS.)

IS 15748 (2007)

Textiles – Protective clothing for industrial workers exposed to heat (Excluding firefighters’ and welders’ clothing)

- View breakup
Rs.41100/- Plus 18% GST

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
(Lab of national repute and eminence, facilities of which are being utilized by BIS.)

IS 15852 (2009)

Textiles – Polyester blended woven shirting for uniforms

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1, Table 1,vi)(vi) Fibres composition, percent : a) Polyester b) Viscose/cotton )	-	2000		-

-
-

IS 15853 (2009)

Textiles – Polyester blended woven suiting for uniforms

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1, Table 1,vi)(vi) Fibres composition, percent : a) Polyester b) Viscose/cotton )	-	2000		-

-
-

IS 15809 (2017)

High visibility warning clothes – Specification (first revision)

48950 View breakup
-

Clause No.	Exclusion	Remark
5.3(Colour Fastness of Background Material)	-	-
5.4(Photometric and Physical Performance Requirements for Retroreflective and Combined- Performance Materials 5.4.1 Performance Requirements of Retroreflective)	-	-
5.5.3(Bursting strength)	-	-
5.1(Materials)	-	-
5.2(Garment design)	-	-
5.3(Colour )	-	-
5.3(Colour fastness of background materials after xenon test )	-	-
5.5(Mechanical Properties of Background Material)	-	-
5.5.1(Tensile testing)	-	-
5.5.3(Bursting strength)	-	-

-
-

IS 12171 (2019)

Cotton bales – Specification (third revision)

- View breakup
Rs.3500/- Plus 18% GST

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
(Lab of national repute and eminence, facilities of which are being utilized by BIS.)

Bureau of Indian Standards

The National Standards Body of India

Northern India Textile Research Association (NITRA), Ghaziabad

Sector-23, Rajnagar, Ghaziabad, Ghaziabad, Uttar Pradesh, 201002

1202807390 mail@nitratextile.org

Scope List

No Record Found

No Record Found

No Record Found

No Record Found