BIS - LIMS (Laboratory Information Management System)

Bureau of Indian Standards

The National Standards Body of India

Indian Institute of Technology Chennai

Indian Institute Of Technology, Chennai, Tamil Nadu 600036, Chennai, Chennai, Tamil Nadu, 600036

1234567890 sthol@civil.iitm.ac.in

Scope List

Reset

12 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

1

IS 2553 : Part 1 (2018)

Safety glass - Specification: Part 1 architectural, building and general uses (Fourth Revision)

SGRT

-

235000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4(Types)	-	10000		-
5.1.1(General)	-	10000		-
5.1.2(Optical Faults-IS 14900)	-	15000		-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	15000		-
5.1.2(Reams, Strings and Lines-IS 14900)	-	15000		-
5.1.2(Linear / Extended Faults -IS 14900)	-	15000		-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	10000		-
5.2.2.1( Dimensions- Width )	-	10000		-
5.2.2.1( Dimensions- Length)	-	10000		-
5.2.2.2( Squareness)	-	10000		-
5.2.3 (Fragmentation Test- IS 17004)	-	15000		-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	15000		-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	15000		-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	15000		-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	15000		-
5.2.4.1 (Other distortions)	-	15000		-
5.2.5.1( Resistance to shock- IS 17004)	-	20000		-
5.2.5.2( Resistance to human impact- IS 17004)	-	25000		-
5.2.6( Surface Compression (Optional)- IS 17004)	-	25000		-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	40000		-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	10000		-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	10000		-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	10000		-
5.3.2.1( Dimensions and squareness- Width )	-	10000		-
5.3.2.1( Dimensions and squareness- Length)	-	10000		-
5.3.2.1( Dimensions and squareness-Squareness)	-	10000		-
5.3.2.2 (Edge displacement)	-	10000		-
5.3.3( Light Stability Test-IS 17004)	-	35000		-
5.3.3( Light Stability Test-IS 17004)	-	35000		-
5.3.4( Boil and Bake Tests-IS 17004)	-	40000		-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	20000		-
5.3.6.1( Spot defects in the central area)	-	10000		-
5.3.6.3( Defects in the outer area for framed edges)	-	10000		-
5.3.6.4( Vents)	-	10000		-
5.3.6.5( Creases and streaks)	-	10000		-
5.3.6.6( Defects on edge which will not be framed)	-	10000		-
5.3.7( Humidity Test – Optional)	-	35000		-
5.3.8( Resistance to Human Impact Test)	-	25000		-
4(Types)	-	10000		-
5.3.4(Boil test)	-	20000		-
5.3.4(Bake test)	-	20000		-
5.3.7(Humidity test with condensation)	-	30000		-
5.3.7(Humidity test without condensation)	-	30000		-

Complete

-

-

2

IS 5100 (1969)

Specification for twist drills, parallel shanks, stub series for right hand cutting

-

-

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-

(Lab of national repute and eminence, facilities of which are being utilized by BIS.)

3

IS 5102 (1969)

Specification for twist drills, parallel shank, long series

-

-

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-

(Lab of national repute and eminence, facilities of which are being utilized by BIS.)

4

IS 5103 (1969)

Specification for twist drills, morse taper shanks

-

-

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-

(Lab of national repute and eminence, facilities of which are being utilized by BIS.)

5

IS 5104 (1969)

Specification for twist drills, oversize morse taper shank

-

-

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-

(Lab of national repute and eminence, facilities of which are being utilized by BIS.)

6

IS 5105 (1969)

Specification for twist drills, taper square shanks for ratchet braces

-

-

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-

(Lab of national repute and eminence, facilities of which are being utilized by BIS.)

7

IS 5106 (1969)

Specification for Twist Drills, Taper Square Shanks for Carpenters braces

-

-

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-

(Lab of national repute and eminence, facilities of which are being utilized by BIS.)

8

IS 7347 (1974)

Specification for performance of small size spark ignition engines

-

-

- View breakup
Rs.20000/- to Rs.1,25,000/- (for 8 hrs-Rs.20000/-, for 100 hrs-Rs.1,25,000/-) Testing charges depend on the duration of the test

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-

(Lab of national repute and eminence, facilities of which are being utilized by BIS.)

9

IS 1520 (1980)

Horizontal centrifugal pumps for clear, cold, fresh water

-

-

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-

(Lab of national repute and eminence, facilities of which are being utilized by BIS.)

10

IS 780 (1984)

sluice valves for water works purposes (50 to 300 mm size)

-

-

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-

(Lab of national repute and eminence, facilities of which are being utilized by BIS.)

11

IS 5101 (1991)

Twist drills, parallel shank, jobber. series - Specification (First Revision)

-

-

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-

(Lab of national repute and eminence, facilities of which are being utilized by BIS.)

12

IS 325 (1996)

Three-phase Induction Motors

-

-

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-

(Lab of national repute and eminence, facilities of which are being utilized by BIS.)

Designed, Developed and Maintained by:

Arohatech IT Services (P) Ltd.

Contact for any query/support: supportlims@bis.gov.in