BIS - LIMS (Laboratory Information Management System)

BIS, Bengaluru Branch Laboratory (BNBL)

Peenya Industrial Area, 1st Stage, Tumkur Road, Bengaluru - 560058, Bengaluru, Bengaluru Urban, Karnataka, 560058

- bnbol@bis.gov.in

Scope List

Reset

13 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 2888 (2004)

Toilet soap - Specification (Third Revision)

- View breakup
Rs. 4050/- each for Gr.1 & Gr.2 Rs. 4700/- for Gr. 3

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.5, Table-1 (vii), Grade-1 (Lather)	-
5.5, Table-1 (vii), Grade-2 (Lather)	-
5.5, Table-1 (vii), Grade-1 (Lather)	-
5.5, Table-1 (vi), Grade-1, Grade-2 & Grade-3 (Free carbonated alkali)	-
5.5, Table-1 (v), Grade-1, Grade-2 & Grade-3 (Chloride (as sodium chloride), IS 286)	-
5.5, Table-1 (iv), Grade-2 & Grade-3 (Matter insoluble in alcohol, IS 286)	-
5.5, Table-1 (iii), Grade-1, Gr-2 & Gr-3 (Free caustic alkali, as sodium hydroxide (NaOH), IS 286)	-
5.5, Table-1 (ii), Grade-1, Gr-2 & Gr-3 (Rosin acids, percent by mass of total fatty matter, IS 286 )	-
5.5, Table-1 (iv), Grade-1 (Matter insoluble in alcohol, IS 286)	-
5.5, Table-1 (i), Grade-1 (Total fatty matter, IS 286)	-
5.5, Table-1 (i), Grade-2 (Total fatty matter, IS 286)	-
5.5, Table-1 (i), Grade-3 (Total fatty matter, IS 286)	-
5.3 (Phenolic substances, IS 286)	-

-
-

IS 261 (1982)

Specification for copper sulphate (Second Revision)

technical

please see remarks View breakup
Rs 2400/- for Tech., Rs 3900/- for Pure

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
1(i) Table 1 (Copper, Tech, A-2)	-
1(ii) Table 1 (Matter insoluble in water, Tech, A-3)	-
1(iii) Table 1 (Soluble iron and aluminium compounds ( as Fe ), Tech, A-4)	-
1(iv) Table 1 (pH value, Tech, A-5)	-
Cl 3.1 (Description, Tech and Pure)	-

-
-

IS 1065 : Part 1 (2019)

Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2 (Description)	-
5.3 Table-1 i (Available chlorine)	-
5.3 Table-1 ii (Stability, loss of Chlorine on the basis of initial available chlorine )	-
5.3 Table-1 iiii (Moisture, percent by mass. )	-
5.3 Table-1 iv (Particle size (Passing through 170 mm IS Sieve). Percent by mass)	-
Clause 5.4 (Keeping Quality )	-

-
-

IS 612 (1992)

Roasted chicory powder - Specification (Third Revision)

The testing charges for the product are Rs 3400.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.5 Table 1 (Acid Insoluble ash)	-
3.5 Table 1 (Total Ash)	-
3.5 Table 1 (Moisture)	-
3.5 Table 1 (Water soluble Matter )	-
3.5 Table 1 (Acid Insoluble ash)	-
3.5 Table 1 (Water soluble Matter )	-
3.1 (Description)	-
3.2 (Cup Test)	-
3.3 (Microscopic Appearance)	-

-
-

IS 9825 (2003)

Chlorine tablets - Specification (Second Revision)

Rs.4330/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.2 (Description)	-
Cl.4.3 (Size (Mass of tablet))	-
Cl.4.3 (Available Chlorine (Annex A))	-
Cl.4.4 (Moisture (Annex B))	-
Cl.4.4 (Shelf Life (Annex A))	-

-
-

IS 5346 (1994)

Synthetic food colour - Preparations and mixtures - Specification (Second Revision)

Rs. 4100/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.5 (Total dye Content)	-
Clause 4.6 Table 1 (Water InsoIuble matter,)	-
Clause 4.5 (Total dye Content)	-
Clause 4.6 Table 1 (Lead (as pb) )	-
Clause 4.6 Table 1 (Arsenic(as As))	-
Clause 4.6 Table 1 (Heavy metals)	-
Clause no4.2 (Description)	-

-
-

IS 11673 : Part 1 (2019)

Sodium hypochlorite solution - Specification: Part 1 household and industrial use (Second Revision)

Household and Industrial Use

Rs.9359/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. No. 5.1 (Description Grade 1 & 2)	-
Cl. No. 5.2 (Keeping quality- available chlorine( table no. 1, cl 5.3, Annex B), Grade 1 & 2)	-
Cl. No. 5.3, table no. 1, Sl no. 1 (Relative density, Grade 1, Annex -A)	-
Cl. No. 5.3, table no. 1, Sl no. 2 (Available chlorine (as Cl₂), Grade 1, Annex B)	-
Cl. No. 5.3, table no. 1, Sl no. 3 (Total chlorine (as Cl₂), Grade 1, Annex C)	-
Cl. No. 5.3, table no. 1, Sl no. 4 (Free alkali (as NaOH), Grade 1, Annex D)	-
Cl. No. 5.3, table no. 1, Sl no. 5 (Free sodium carbonate (as Na₂CO₃), Grade 1, Annex E)	-
Cl. No. 5.3, table no. 1, Sl no. 6 (Iron (as Fe), Grade 1, Annex F)	-
Cl. No. 5.3, table no. 1, Sl no. 6 (Iron (as Fe), Grade 1, Annex F)	-
Cl. No. 5.3, table no. 1, Sl no. 7 (Sodium chlorate (as NaClO₃), Grade 1, Annex G)	-

-
-

IS 5514 (1996)

Specification Apparatus Used in `Le-chatelier' Test

s.1200.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2 (CONSTRUCTION-Thickness)	-
2 (CONSTRUCTION-Internal Dia.)	-
2 (CONSTRUCTION-Height)	-
2 (CONSTRUCTION)	-
2 (CONSTRUCTION-Distance between ended)	-
2 (CONSTRUCTION-cover plate Weight)	-
3-Table 1 (DIMENSIONS-Outer side of the mould to the end of the indicator)	-
3-Table 1 (DIMENSIONS-Internal diameter of the mould)	-
3-Table 1 (DIMENSIONS-wall thickness of the mould)	-
3-Table 1 (DIMENSIONS-wall thickness of the mould)	-
3-Table 1 (DIMENSIONS-Split)	-

-
-

IS 205 (1992)

Non - Ferrous metal butt specification (Fourth Revision)

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (TYPES)	-
5.1- Table 2,3,4,5 & Fig-1 & 2 (Dimensions- Type of Hinge 1.Length 2.Breadth 3.Butt Dia 4.Pin Dia 5.Thickness of Flap)	-
5.1- Table 2,3,4,5 & Fig-1 & 2 (Dimensions- 1. Holes for Screw Desination 2. No. of screw Holes)	-
5.2 ,Table 6 (Tolerances-Tolerances on dimensions of hinges )	-
6.1 (Manufacture- General)	-
6.2- Table 2,3,4,5 (Kunckles)	-
6.3 (Screw Holes)	-
6.3.1- Table 2,3,4,5 & Fig-1 & 2 (Screw Holes)	-
6.3.2- Table 2,3,4,5 (Number of Holes)	-
6.3.3 Fig-1 (Position of Holes)	-
8.1 (Packing - Each hinge shall be packed in card board boxes or in any other approved packing. The number of hinges in a package shall be as under)	-
8.2 (Packing -Each Package shall bear the following Particulars)	-

-
Excluding Material Testing

IS 204 : Part 2 (1992)

Tower bolts - Specification: Part 2 non - Ferrous metals (Fifth Revision)

Rs.2100.00. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (General)	-
5.2.1 Table 1 (Particulars-Barrel Tower Bolts)	-
5.2.2 Table 2 (Particulars-Skeleton Tower Bolts)	-
6.1- Table 1 (Dimension of Barrel tower bolts-1.Size 2.Length of Bolt or Barrel-(A or B) 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Metal of Barrel (Brass or Zink Alloy/Aluminium alloy/Sheet Brass)-F 8.Dia of bore of barrel or socket- G )	-
6.1- Table 1 (Dimension of barrel tower bolts-Minimum No. of equally Spaced holes in Barrel & Socket for wooden screw no 6)	-
6.2- Table 2 (Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt -A 3.Length of Bolt Plate -B 4.Width of Bolt Plate or Staple-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Socket (Brass /Aluminium alloy or Zink Alloy)-F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob )	-
6.2- Table 2 (Dimension of Skeleton Tower Bolts- Nos of Staples)	-
6.2- Table 2 (Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 4)	-
6.2- Table 3 (PACKING)	-

-
Excluding Material Testing

IS 204 : Part 1 (1991)

Tower bolts - Specification: Part 1 ferrous metals (Fifth Revision)

Rs.2100.00. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (General)	-
5.2.1 Table 1 (Particulars-Barrel Tower Bolts)	-
5.2.2 Table 2 (Particulars-Sami Barrel Tower Bolts)	-
5.2.3 Table 3 (Particulars-Riveted or Spot Welded Tower Bolts)	-
5.2.4 Table 4 (Particulars-Skeleton Tower Bolts)	-
6.1- Table 1 (Dimension of Barrel tower bolts-1.Size 2.Length of Bolt-A 3.Length of Barrel-B 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of mild steel sheet for barrel-F 8.Dia of bore of barrel or socket- G )	-
6.1- Table 1 (Dimension of Barrel tower bolts-Minimum No. of equally Spaced Screw holes in Barrel and Socket for wood screw no 6)	-
6.2- Table 2 (Dimension of Sami Barrel Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Bolt Plate or Socket-F 8.Dia of bore of Bolt Plate or socket G )	-
6.2- Table 2 (Dimension of Sami Barrel Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-
6.3- Table 3 (Dimension of Riveted or Spot Welded Tower Bolts- 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7. Length of Strap-E" 8.Thickness of Back Plate -F 9.Thickness of Socket or Upper Plate and Strap- F" 10.Dia of bore of Bolt Plate or socket- G 11. Length of Alternative Socket-H )	-
6.3- Table 3 (Dimension of Riveted or Spot Welded Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-
6.4- Table 4 (Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Staple -F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob-J)	-
6.4- Table 4 (Dimension of Skeleton Tower Bolts- Nos of Staples)	-
6.4- Table 4 (Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 6)	-
8.1 (MARKING- .)	-
8.1.1, (MARKING- )	-
9 (PACKING)	-

-
Excluding Material Testing

IS 1507 (1977)

Specification for copper oxychloride water dispersible powder concentrates

Rs 2700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.2.1 (Description)	-
Cl. 2.3, Table-1 (Copper Content)	-
Cl. 2.3, Table-1 (Suspensibility)	-
Cl. 2.3, Table-1 (pH of one percent aqueous dispersion)	-

-
-

IS 1011 (2002)

Biscuits - Specification (Fourth Revision)

Rs.3280/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.3 Table 2 i (Moisture)	-
6.3 Table 2 ii (Acid insoluble ash (on dry basis))	-
6.3 Table 2 iii (Acidity of extracted fat (as oleic acid))	-
6.1 (General Requirement)	-

-
-

Bureau of Indian Standards

The National Standards Body of India

BIS, Bengaluru Branch Laboratory (BNBL)

Peenya Industrial Area, 1st Stage, Tumkur Road, Bengaluru - 560058, Bengaluru, Bengaluru Urban, Karnataka, 560058

- bnbol@bis.gov.in

Scope List