BIS - LIMS (Laboratory Information Management System)

YOR LAB

Plot no.42/2,Survey no.83,Opp.Gondal Bypass BRTS Bus Stop,150 feet ring road,Rajkot, Rajkot, Rajkot, Gujarat, 360004

9825034335 yorlabindia@gmail.com

Scope List

Reset

78 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	500	15% Discount for BIS Samples
3(Designation)	-	500	15% Discount for BIS Samples
4(Colour)	-	500	15% Discount for BIS Samples
8.1(Hydraulic characteristics)	-	3000	15% Discount for BIS Samples
8.2(Reversion)	-	1500	15% Discount for BIS Samples
8.3(Density)	-	1500	15% Discount for BIS Samples
8.4(Melt Flow Rate)	-	1500	15% Discount for BIS Samples
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	1500	15% Discount for BIS Samples
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	1500	15% Discount for BIS Samples
5.1(High Density Polyethylene)	-	1000	15% Discount for BIS Samples
5.2(Anti Oxident)	-	1000	15% Discount for BIS Samples
10(Marking)	-	500	15% Discount for BIS Samples
3(Designation)	-	500	15% Discount for BIS Samples
4(Colour)	-	500	15% Discount for BIS Samples
8.1(Hydraulic characteristics)	-	3000	15% Discount for BIS Samples
8.2(Reversion)	-	1500	15% Discount for BIS Samples
8.3(Density)	-	1500	15% Discount for BIS Samples
8.4(Melt Flow Rate)	-	1500	15% Discount for BIS Samples
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	1500	15% Discount for BIS Samples
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	1000	15% Discount for BIS Samples
5.1(High Density Polyethylene)	-	1000	15% Discount for BIS Samples
5.2(Anti Oxident)	-	1000	15% Discount for BIS Samples
6(Dimensions of pipes)	-	500	15% Discount for BIS Samples
7(Visual Appearance)	-	500	15% Discount for BIS Samples

Complete

IS 319 (2007)

Free cutting brass bars, rods and section - Specification (Fifth Revision)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Freedom from defects)	-	500	15% Discount for BIS Samples
7.0(Dimension and Tolerances)	-	500	15% Discount for BIS Samples
8.1 Table 1(Cu)	-	500	15% Discount for BIS Samples
8.1 Table 1(Pb)	-	500	15% Discount for BIS Samples
8.1 Table 1(Fe)	-	500	15% Discount for BIS Samples
8.1 Table 1(Total other impurities excluding iron)	-	500	15% Discount for BIS Samples
9.1 Table-2(Tensile Strength)	-	1500	15% Discount for BIS Samples
9.2(Vickers Hardness)	-	2000	15% Discount for BIS Samples
9.1 Table-2(Elongation)	-	1500	15% Discount for BIS Samples
10.1(Mercurous Nitrate Test)	-	2000	15% Discount for BIS Samples

Complete

IS 14885 (2001)

Polyethylene pipes for the supply of gaseous fuels - Specification

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(Colour)	-	500	15% Discount for BIS Samples
Table-2, 5.1(Conventional Density, IS 7328:1992)	-	1000	15% Discount for BIS Samples
Table-2, 5.1(Melt Flow Rate, IS 2530:1963)	-	1000	15% Discount for BIS Samples
Table-2, 5.1(Thermal Staibility, Annex-D)	-	15000	15% Discount for BIS Samples
Table-2, 5.1(Resistance to gas constituents, Cl 5.5)	-	10000	15% Discount for BIS Samples
Table-2, 5.1(Pigment dispersion, Annex-E)	-	1500	15% Discount for BIS Samples
5.2(Anti Oxidant: Cl. 17 of IS 2530)	-	1000	15% Discount for BIS Samples
6.1, Table-3(Ovality Pipe, Cl 6.3.2)	-	500	15% Discount for BIS Samples
6.1, Table-3(Nominal Outside Diameter of Pipes , Cl 6.3.1)	-	500	15% Discount for BIS Samples
6.2.1, Table-4(Minimum Wall Thickness, Cl.6.3, Cl.6.2.1.1, Table-5)	-	500	15% Discount for BIS Samples
6.4(Length of pipe)	-	500	15% Discount for BIS Samples
7, Table-6(Maximmn Out of Square of Each Pipe End)	-	500	15% Discount for BIS Samples
8.1(Hydraulic Charactristics, Annex-A)	-	3000	15% Discount for BIS Samples
8.2(Reversion Test. Annex-C)	-	2000	15% Discount for BIS Samples
8.3(Density, Annex A of IS 7328)	-	1500	15% Discount for BIS Samples
8.4(Melt Flow Rate (MFR), IS 2530)	-	1000	15% Discount for BIS Samples
8.7(Tensile yield strength, Annex-J)	-	1500	15% Discount for BIS Samples
8.8(Resistance to Weathering, Annex-F)	-	15000	15% Discount for BIS Samples
8.9(Squeeze off, Annex-G)	-	2500	15% Discount for BIS Samples
8.6 & Table-2(Volatile Content: Annex-H of IS 14885)	-	2000	15% Discount for BIS Samples
10(Marking)	-	500	15% Discount for BIS Samples
4.4(Colour)	-	500	15% Discount for BIS Samples
Table-2, 5.1(Conventional Density, IS 7328:1992)	-	1000	15% Discount for BIS Samples
Table-2, 5.1(Melt Flow Rate, IS 2530:1963)	-	1000	15% Discount for BIS Samples
Table-2, 5.1(Thermal Staibility, Annex-D)	-	15000	15% Discount for BIS Samples
Table-2, 5.1(Resistance to gas constituents, Cl 5.5)	-	2500	15% Discount for BIS Samples
Table-2, 5.1(Pigment dispersion, Annex-E)	-	1500	15% Discount for BIS Samples
5.2(Anti Oxidant: Cl. 17 of IS 2530)	-	1000	15% Discount for BIS Samples
6.1, Table-3(Ovality Pipe, Cl 6.3.2)	-	500	15% Discount for BIS Samples
6.1, Table-3(Nominal Outside Diameter of Pipes , Cl 6.3.1)	-	500	15% Discount for BIS Samples
6.2.1, Table-4(Minimum Wall Thickness, Cl.6.3, Cl.6.2.1.1, Table-5)	-	500	15% Discount for BIS Samples
6.4(Length of pipe)	-	500	15% Discount for BIS Samples
7, Table-6(Maximmn Out of Square of Each Pipe End)	-	500	15% Discount for BIS Samples
8.1(Hydraulic Charactristics, Annex-A)	-	3000	15% Discount for BIS Samples
8.2(Reversion Test. Annex-C)	-	1500	15% Discount for BIS Samples
8.3(Density, Annex A of IS 7328)	-	1000	15% Discount for BIS Samples
8.4(Melt Flow Rate (MFR), IS 2530)	-	1000	15% Discount for BIS Samples
8.7(Tensile yield strength, Annex-J)	-	1500	15% Discount for BIS Samples
8.8(Resistance to Weathering, Annex-F)	-	15000	15% Discount for BIS Samples
8.9(Squeeze off, Annex-G)	-	2500	15% Discount for BIS Samples
8.6 & Table-2(Volatile Content: Annex-H of IS 14885)	-	1000	15% Discount for BIS Samples
10(Marking)	-	500	15% Discount for BIS Samples
8.5(Thermal Stability to Oxidation, Annex-D)	-	3000	15% Discount for BIS Samples

Complete

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

49500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	500	15% Discount for BIS Samples
Cl 7(Dimensions Of Pipes)	-	500	15% Discount for BIS Samples
Cl 8(Visual Appearance)	-	500	15% Discount for BIS Samples
Cl 9.1(Hydraulic Characteristics)	-	3000	15% Discount for BIS Samples
Cl 9.3(Reversion Test )	-	3000	15% Discount for BIS Samples
Cl 9.4 & Annex B(Impact Strength)	-	2500	15% Discount for BIS Samples
Cl 9.5(Density)	-	2500	15% Discount for BIS Samples
Cl 9.6(Melt Flow Rate)	-	2000	15% Discount for BIS Samples
Cl 9.7(Carbon Black Content & Dispersion)	-	2000	15% Discount for BIS Samples
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	20000	15% Discount for BIS Samples
Cl 9.9(Opacity)	-	2000	15% Discount for BIS Samples
Cl 4( Designation)	-	500	15% Discount for BIS Samples
Cl 7(Dimensions Of Pipes)	-	500	15% Discount for BIS Samples
Cl 8(Visual Appearance)	-	500	15% Discount for BIS Samples
Cl 9.1(Hydraulic Characteristics)	-	3000	15% Discount for BIS Samples
Cl 9.3(Reversion Test )	-	2000	15% Discount for BIS Samples
Cl 9.4 & Annex B(Impact Strength)	-	2500	15% Discount for BIS Samples
Cl 9.5(Density)	-	2000	15% Discount for BIS Samples
Cl 9.6(Melt Flow Rate)	-	2000	15% Discount for BIS Samples
Cl 9.7(Carbon Black Content & Dispersion)	-	2500	15% Discount for BIS Samples
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	20000	15% Discount for BIS Samples
Cl 9.9(Opacity)	-	1500	15% Discount for BIS Samples
Cl 4( Designation)	-	500	15% Discount for BIS Samples
Cl 7(Dimensions Of Pipes)	-	500	15% Discount for BIS Samples
Cl 8(Visual Appearance)	-	500	15% Discount for BIS Samples
Cl 9.1(Hydraulic Characteristics)	-	3000	15% Discount for BIS Samples
Cl 9.3(Reversion Test )	-	3000	15% Discount for BIS Samples
Cl 9.4 & Annex B(Impact Strength)	-	2500	15% Discount for BIS Samples
Cl 9.5(Density)	-	2500	15% Discount for BIS Samples
Cl 9.6(Melt Flow Rate)	-	2000	15% Discount for BIS Samples
Cl 9.7(Carbon Black Content & Dispersion)	-	2000	15% Discount for BIS Samples
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	20000	15% Discount for BIS Samples
Cl 9.9(Opacity)	-	1500	15% Discount for BIS Samples
5(Colour)	-	500	15% Discount for BIS Samples

Complete

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	500	15% Discount for BIS Samples
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	500	15% Discount for BIS Samples
6.3(Standard Mark on Conduit)	-	500	15% Discount for BIS Samples
7.1.1(Maximum and minimum outside diameter of socket)	-	500	15% Discount for BIS Samples
7.1.1 Table-2(Length of Socket end)	-	500	15% Discount for BIS Samples
7.1.2(Maximum and minimum outside diameter of conduit)	-	500	15% Discount for BIS Samples
7.3(Length of conduit)	-	500	15% Discount for BIS Samples
7.4(Unifomity of The wall Thickness)	-	500	15% Discount for BIS Samples
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	500	15% Discount for BIS Samples
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1500	15% Discount for BIS Samples
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	2000	15% Discount for BIS Samples
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1500	15% Discount for BIS Samples
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	2000	15% Discount for BIS Samples
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	2000	15% Discount for BIS Samples
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	1500	15% Discount for BIS Samples
6.1(Marking)	-	500	15% Discount for BIS Samples
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	500	15% Discount for BIS Samples
6.3(Standard Mark on Conduit)	-	500	15% Discount for BIS Samples
7.1.1(Maximum and minimum outside diameter of socket)	-	500	15% Discount for BIS Samples
7.1.1 Table-2(Length of Socket end)	-	500	15% Discount for BIS Samples
7.1.2(Maximum and minimum outside diameter of conduit)	-	500	15% Discount for BIS Samples
7.3(Length of conduit)	-	500	15% Discount for BIS Samples
7.4(Unifomity of The wall Thickness)	-	500	15% Discount for BIS Samples
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	500	15% Discount for BIS Samples
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1500	15% Discount for BIS Samples
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	2000	15% Discount for BIS Samples
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1500	15% Discount for BIS Samples
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	2000	15% Discount for BIS Samples
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	2000	15% Discount for BIS Samples
10.0(Resistance to Heat -Ball presure test)	-	1500	15% Discount for BIS Samples
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	2000	15% Discount for BIS Samples

Complete

IS 15265 (2003)

Flexible pvc pipes or polymer reinforced thermoplastic hoses for suction and delivery lines of agricultural pumps - Specification

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 Table 1(Internal Diameter)	-	500	15% Discount for BIS Samples
5.2 Table 2(Length)	-	500	15% Discount for BIS Samples
6.1 Table 3(Hydrostatic test atatmospheric condition)	-	2500	15% Discount for BIS Samples
6.2 Table 4(Hydrostatic test at 55± 2°C)	-	2500	15% Discount for BIS Samples
6.3(Pressure Impulse Test Annex B)	-	3000	15% Discount for BIS Samples
6.4(Vaccum Test requirement Annex C)	-	2500	15% Discount for BIS Samples
6.5(Reinforce Facture Test Requirement Annex D)	-	3000	15% Discount for BIS Samples
6.6(Minimum Bend Radius Requirement- Annex E )	-	3000	15% Discount for BIS Samples
6.7(Cold Bend Radius Requirement- Annex E )	-	2500	15% Discount for BIS Samples
6.8(Loss in Mass on Heating- Annex F)	-	2500	15% Discount for BIS Samples
6.9(Effect of Sunlight)	-	3000	15% Discount for BIS Samples

Complete

IS 17546 (2021)

Chlorinated polyvinyl chloride CPVC fittings for potable hot and cold water distribution supplies Specification

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Nominal Size(DN))	-	500	15% Discount for BIS Samples
3.2(Nominal Outside Diameter)	-	500	15% Discount for BIS Samples
3.3(Mean Inside Diameter of Socket at Entry)	-	500	15% Discount for BIS Samples
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	500	15% Discount for BIS Samples
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	500	15% Discount for BIS Samples
3.5(Out-of-Roundness (Ovality))	-	500	15% Discount for BIS Samples
3.6(Nominal Wall Thickness)	-	500	15% Discount for BIS Samples
3.7(Minimum Wall Thickness)	-	500	15% Discount for BIS Samples
3.8(Tolerance)	-	500	15% Discount for BIS Samples
3.9(Working Pressure)	-	500	15% Discount for BIS Samples
3.1(Standard Dimension Ratio)	-	500	15% Discount for BIS Samples
3.11(Type Tests)	-	1500	15% Discount for BIS Samples
3.11(Acceptance Tests)	-	1500	15% Discount for BIS Samples
6(Composition)	-	10000	15% Discount for BIS Samples
7(Dimensions of fitting)	-	2000	15% Discount for BIS Samples
8.2(Opacity)	-	2000	15% Discount for BIS Samples
8.1(Visual Appearance)	-	500	15% Discount for BIS Samples
8.3(Stress Relief Test)	-	2500	15% Discount for BIS Samples
8.4(Vicat softening Temperature)	-	1500	15% Discount for BIS Samples
8.5(Density)	-	1500	15% Discount for BIS Samples
8.6(Effect on water)	-	3500	15% Discount for BIS Samples
9(Mechanical Properties)	-	4000	15% Discount for BIS Samples
11(Marking)	-	500	15% Discount for BIS Samples

Complete

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	500	15% Discount for BIS Samples
9.5(Tensile Strength IS 12235(Part 13))	-	1000	15% Discount for BIS Samples
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1000	15% Discount for BIS Samples
9.3(Density IS 12235 (Part 14))	-	1000	15% Discount for BIS Samples
9.2(Internal Diameter)	-	500	15% Discount for BIS Samples
9.1( Visual Appearance)	-	500	15% Discount for BIS Samples
9.1(Visual Appearance)	-	500	15% Discount for BIS Samples
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	500	15% Discount for BIS Samples
8.4(Sealing rings - Hardness)	-	1000	15% Discount for BIS Samples
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	1000	15% Discount for BIS Samples
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	1000	15% Discount for BIS Samples
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	500	15% Discount for BIS Samples
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	500	15% Discount for BIS Samples
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	500	15% Discount for BIS Samples
7.4 Table 8 & 9 Fig 1(Segmental length, l5)	-	500	15% Discount for BIS Samples
7.4 Table 8 & 9 Fig 1(Segmental length, l4)	-	500	15% Discount for BIS Samples
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	500	15% Discount for BIS Samples
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	500	15% Discount for BIS Samples
7.3.2(Rib height)	-	500	15% Discount for BIS Samples
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	500	15% Discount for BIS Samples
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	500	15% Discount for BIS Samples
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	1000	15% Discount for BIS Samples
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	500	15% Discount for BIS Samples
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	1000	15% Discount for BIS Samples
4.1.2(K-Value as per IS-4669)	-	1000	15% Discount for BIS Samples
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	3000	15% Discount for BIS Samples
5.0(Colour of Pipes)	-	500	15% Discount for BIS Samples
4.1.1 (VCM Content as per IS 10151 (Annex A))	-	1000	15% Discount for BIS Samples
8.4(Sealing elements a. Elastomeric material b. Shore A hardness of sealing Elements )	-	1000	15% Discount for BIS Samples
11(Marking)	-	500	15% Discount for BIS Samples
5.1(Materials)	-	1500	15% Discount for BIS Samples

Complete

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.2(diameter of the socket of cap)	-	1000		15% Discount for BIS Samples

Complete

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(Size)	-	500	15% Discount for BIS Samples
2.2.2, Table 1(Union Laying Length)	-	500	15% Discount for BIS Samples
2.2.3( inside diameter of the socket)	-	500	15% Discount for BIS Samples
2.2.3(Socket length)	-	500	15% Discount for BIS Samples

Complete

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(Size)	-	500	15% Discount for BIS Samples
2.2.3( inside diameter of the socket)	-	500	15% Discount for BIS Samples
2.2.3(Socket length)	-	500	15% Discount for BIS Samples

Complete

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(Size)	-	500	15% Discount for BIS Samples
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	500	15% Discount for BIS Samples
2.2.2, Table 1(45 ̊ Tees Laying Length, Z1)	-	500	15% Discount for BIS Samples
2.2.3( inside diameter of the socket)	-	500	15% Discount for BIS Samples
2.2.3(Socket length)	-	500	15% Discount for BIS Samples

Complete

IS 7834 : Part 4 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(Size)	-	500	15% Discount for BIS Samples
2.2.2, Table 1(90 ̊ Elbow Laying Length)	-	500	15% Discount for BIS Samples
2.2.3( inside diameter of the socket)	-	500	15% Discount for BIS Samples
2.2.3(Socket length)	-	500	15% Discount for BIS Samples

Complete

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
cl 2.2.2(Dimensions)	-	500	15% Discount for BIS Samples
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	2000	15% Discount for BIS Samples
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (third extraction) - Appendix C)	-	2000	15% Discount for BIS Samples
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Dialkyl tin C4 and higher homologues measured as tin (third extraction) - Appendix C)	-	2000	15% Discount for BIS Samples
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Other toxic substances (third extraction) - Appendix C)	-	2000	15% Discount for BIS Samples

Complete

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.4 PART-1(Short term hydraulic test)	-	500	15% Discount for BIS Samples
2.2.3(socket length)	-	500	15% Discount for BIS Samples
table 1 sl.no: 01(16 )	-	500	15% Discount for BIS Samples
2.2.2, Table 1(Size)	-	500	15% Discount for BIS Samples
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	500	15% Discount for BIS Samples
2.2.3( inside diameter of the socket)	-	500	15% Discount for BIS Samples

Complete

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	500	15% Discount for BIS Samples
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	500	15% Discount for BIS Samples
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	500	15% Discount for BIS Samples
Cl. 6.1(Stress Relief Test- Appendix A)	-	1500	15% Discount for BIS Samples
Cl. 6.2(Opacity- Appendix B)	-	1500	15% Discount for BIS Samples
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	3000	15% Discount for BIS Samples
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	3000	15% Discount for BIS Samples
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	3000	15% Discount for BIS Samples
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	3000	15% Discount for BIS Samples
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	3000	15% Discount for BIS Samples

Complete

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.a (Potyethylene - higher olefins constituent )	-	1500	15% Discount for BIS Samples
4.1.b(Potyethylene - anti-oxidant)	-	1500	15% Discount for BIS Samples
4.1.c.i (Density)	-	2000	15% Discount for BIS Samples
4.1.c.ii (Toluene extract - Annex A)	-	1500	15% Discount for BIS Samples
4.1.c.iii (Volatile matter - Annex B )	-	1500	15% Discount for BIS Samples
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	1500	15% Discount for BIS Samples
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	1000	15% Discount for BIS Samples
7.3(Tensile Test)	-	1500	15% Discount for BIS Samples
7.3(Elongation at Break)	-	1500	15% Discount for BIS Samples
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1500	15% Discount for BIS Samples
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	2000	15% Discount for BIS Samples
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	1000	15% Discount for BIS Samples
7.2(Reversion Test)	-	1500	15% Discount for BIS Samples
7.1(Hydraulic Characteristics)	-	2000	15% Discount for BIS Samples
6.1(Visual Appearance)	-	500	15% Discount for BIS Samples
3.1(Class of Pipe)	-	500	15% Discount for BIS Samples
9.0 (9.1)(Minimum Internal Diameter of Coil)	-	500	15% Discount for BIS Samples
8.0 (8.1) (Supply of pipes )	-	500	15% Discount for BIS Samples
7.1 Table-2 (b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress)	-	1000	15% Discount for BIS Samples
7.1 Table-2 (Hydraulic Characteristics a)Quality Test for 100 hours at 70°C & 2.5.MPa induced stress. )	-	1500	15% Discount for BIS Samples
4.1.c(iv)(MATERIAL)	-	1500	15% Discount for BIS Samples
Cl. 4.2(Carbon Black Content)	-	1500	15% Discount for BIS Samples
Cl. 4.2(Carbon Black Dispersion)	-	1500	15% Discount for BIS Samples
5.0 5.1 (Table1) (c)Wall thickness of pipe Maximum)	-	1500	15% Discount for BIS Samples
5.0 5.1 (Table1) (c)Wall thickness of pipe Minimum)	-	500	15% Discount for BIS Samples
5.0 5.1 (Table1) (b)Tolerance on OD)	-	500	15% Discount for BIS Samples
4.1d(MATERIAL)	-	1500	15% Discount for BIS Samples

Complete

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Dimensions of pipe - i) Outside diameter)	-	500	15% Discount for BIS Samples
5(Dimensions of pipe - ii) Wall thickness minimum)	-	500	15% Discount for BIS Samples
6(Visual Appearance)	-	500	15% Discount for BIS Samples
7.1(Hydraulic Characteristics - Quality test)	-	3000	15% Discount for BIS Samples
7.1(Hydraulic Characteristics - Acceptance test)	-	3000	15% Discount for BIS Samples
7.2(Reversion Test)	-	1500	15% Discount for BIS Samples
7.3(Tensile Test- i) Tensile Strength)	-	2000	15% Discount for BIS Samples
7.3(Tensile Test - ii)Elongation at Break)	-	2000	15% Discount for BIS Samples
7.4(Fusion Compatibility Test- a) Quality test)	-	2500	15% Discount for BIS Samples
7.4(Fusion Compatibility Test- b) Acceptance test)	-	2000	15% Discount for BIS Samples
7.5(Density)	-	1000	15% Discount for BIS Samples
7.6(Melt Flow Rate)	-	1000	15% Discount for BIS Samples
4.2(Carbon black- a)carbon content)	-	1500	15% Discount for BIS Samples
5.1.2(Ovality)	-	500	15% Discount for BIS Samples
6.1(VISUAL APPEARANCE)	-	500	15% Discount for BIS Samples
5.1 table -1(DIMENSIONS OF PIPES)	-	500	15% Discount for BIS Samples
4.3(Anti-oxidant)	-	500	15% Discount for BIS Samples
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	1000	15% Discount for BIS Samples
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1000	15% Discount for BIS Samples
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	1000	15% Discount for BIS Samples
3(CLASSIFICATION OF PIPES)	-	500	15% Discount for BIS Samples
4.1(Quick Coupled Male and Female Couplers)	-	500	15% Discount for BIS Samples
4.1.3(Workmanship and appearance)	-	500	15% Discount for BIS Samples
4.1(Quick Coupled Male and Female Couplers)	-	500	15% Discount for BIS Samples
7.2.1(Leakage Test)	-	1500	15% Discount for BIS Samples
6.1.3.2(Quick coupled fittings)	-	500	15% Discount for BIS Samples
6.1.2.2(Hydraulic Proof Test)	-	1500	15% Discount for BIS Samples
6.1.3, 6.1.3.1(Weldability Test)	-	1500	15% Discount for BIS Samples

Complete

IS 1110 (1990)

Ferrosilicon - Specification (Fourth Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Silicon- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	500	15% Discount for BIS Sample
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Carbon- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	500	15% Discount for BIS Sample
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Sulphur- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	500	15% Discount for BIS Sample
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Phosphorus- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	500	15% Discount for BIS Sample
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Aluminium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	500	15% Discount for BIS Sample
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Calcium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	500	15% Discount for BIS Sample
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Titanium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	500	15% Discount for BIS Sample
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Boron-IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	500	15% Discount for BIS Sample
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Manganese-IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	500	15% Discount for BIS Sample
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Silicon- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	500	15% Discount for BIS Sample
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Carbon- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	500	15% Discount for BIS Sample
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Sulphur- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	500	15% Discount for BIS Sample
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Phosphorus- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	500	15% Discount for BIS Sample
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Aluminium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	500	15% Discount for BIS Sample
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Calcium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	500	15% Discount for BIS Sample
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Titanium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	500	15% Discount for BIS Sample
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Boron-IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	500	15% Discount for BIS Sample
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Manganese-IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	500	15% Discount for BIS Sample

Complete

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials - shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60°C and at pressures designed for the emitting pipe)	-	2000	15% Discount for BIS Samples
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	1000	15% Discount for BIS Samples
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	1000	15% Discount for BIS Samples
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	1000	15% Discount for BIS Samples
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	1000	15% Discount for BIS Samples
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	1000	15% Discount for BIS Samples
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	1000	15% Discount for BIS Samples
6.2.2(Fittings)	-	500	15% Discount for BIS Samples
6.3(General)	-	500	15% Discount for BIS Samples
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	1500	15% Discount for BIS Samples
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1500	15% Discount for BIS Samples
8.3.1(Wall Thickness ofEmitting Pipe)	-	1500	15% Discount for BIS Samples
8.3.2(Inside Diameter ofEmitting Pipe)	-	500	15% Discount for BIS Samples
8.3.3(Flow Paths in Emitting Unit)	-	1500	15% Discount for BIS Samples
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	1500	15% Discount for BIS Samples
8.5(Resistance to Tension at Elevated Temperature)	-	1500	15% Discount for BIS Samples
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	2000	15% Discount for BIS Samples
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	2000	15% Discount for BIS Samples
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	2000	15% Discount for BIS Samples
9.1(DESIGNATION - Non regulated Emitting Pipe)	-	500	15% Discount for BIS Samples
9.2(DESIGNATION - Regulated Emitting Pipe)	-	500	15% Discount for BIS Samples
4.1 d(MFI @ 1900C/2.16 Kg)	-	1000	15% Discount for BIS Samples
4.2(Carbon black content)	-	1500	15% Discount for BIS Samples
4.1 c(Volatile matter Extract)	-	1500	15% Discount for BIS Samples
4.2(Carbon black dispersion)	-	1500	15% Discount for BIS Samples

Complete

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
19(Marking)	-	500	15% Discount for BIS Samples
3(Type of Fitting)	-	500	15% Discount for BIS Samples
4(Size Designation)	-	500	15% Discount for BIS Samples
5(Colour of fittings)	-	500	15% Discount for BIS Samples
7.1,Table 1(Wall thickness)	-	500	15% Discount for BIS Samples
7.2 ,Table 2&3(Socket Dimensions)	-	500	15% Discount for BIS Samples
7.3(Dimensions of waste trap(Nahani Trap)	-	500	15% Discount for BIS Samples
8(Sealing Rings)	-	1000	15% Discount for BIS Samples
10(Workmanship)	-	500	15% Discount for BIS Samples
11(Design requirements)	-	500	15% Discount for BIS Samples
11.1(Solvent cement type or Rubber ring type)	-	500	15% Discount for BIS Samples
11.2(Socket and spigot configeration)	-	500	15% Discount for BIS Samples
11.4,Table 5(Vent cowl)	-	500	15% Discount for BIS Samples
11.5,Table 6(Pipe Clips)	-	500	15% Discount for BIS Samples
12.1(Visual appearance)	-	500	15% Discount for BIS Samples
12.2(Stress relief test)	-	1500	15% Discount for BIS Samples
12.3(Vicat softening tempewrature)	-	1000	15% Discount for BIS Samples
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	1500	15% Discount for BIS Samples
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1500	15% Discount for BIS Samples
Cl.15, Annex B(Sulphated Ash Content)	-	1500	15% Discount for BIS Samples
16.1(Impact test)	-	1500	15% Discount for BIS Samples
17(Watet tightness of joint)	-	2000	15% Discount for BIS Samples
12.4(Effect on water test)	-	3000	15% Discount for BIS Samples
7.4(Chamfer)	-	500	15% Discount for BIS Samples
11.3(Access Openings)	-	500	15% Discount for BIS Samples
Table 4(Dimension of Access Openings)	-	500	15% Discount for BIS Samples

Complete

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	3000	15% Discount for BIS Samples
8.9 table-6(Elongation at Break)	-	1500	15% Discount for BIS Samples
8.8(Tensile Strength for Butt-fusion)	-	1500	15% Discount for BIS Samples
8.7(Density)	-	1000	15% Discount for BIS Samples
8.5 (Oxidation Induction Time)	-	2500	15% Discount for BIS Samples
8.4( Melt Flow Rate)	-	2000	15% Discount for BIS Samples
8.2(Longitudinal Reversion Test)	-	1500	15% Discount for BIS Samples
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	3000	15% Discount for BIS Samples
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	3000	15% Discount for BIS Samples
7.4.1.2(Ovality)	-	500	15% Discount for BIS Samples
7.4 table -3 & 4(6.1 Dimensions)	-	500	15% Discount for BIS Samples
7.2(Length)	-	500	15% Discount for BIS Samples
6.2.1(6.1.1 Identification Stripes)	-	500	15% Discount for BIS Samples
6.2(Colour)	-	500	15% Discount for BIS Samples
6.1.4(PIPE DESCRIPTION)	-	500	15% Discount for BIS Samples
8.6(Overall migration)	-	1500	15% Discount for BIS Samples
8.3(Carbon black)	-	2000	15% Discount for BIS Samples
5.4(Anti oxydent)	-	1000	15% Discount for BIS Samples
5.3 (a)(Carbon Black Master Batch)	-	1500	15% Discount for BIS Samples
5.2(Polyethylene Resin)	-	1500	15% Discount for BIS Samples
5.2(Density)	-	1500	15% Discount for BIS Samples
5.2(MFI @ 1900C/5.0 Kg)	-	2000	15% Discount for BIS Samples
5.2(Volatile matter Content)	-	2000	15% Discount for BIS Samples
5.3(Toluene Extract)	-	2000	15% Discount for BIS Samples
Clause 7.1(Visual Apperance)	-	500	15% Discount for BIS Samples
Clause 7.3(Coiling)	-	500	15% Discount for BIS Samples
Clause 8.3(Carbon Black content)	-	2000	15% Discount for BIS Samples
Clause 8.3(Carbon Black Dispersion)	-	2000	15% Discount for BIS Samples
Clause 8.6(Overall migration (stimulate))	-	1500	15% Discount for BIS Samples
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	2500	15% Discount for BIS Samples

Complete

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	500	15% Discount for BIS Samples
10.1(Surface Finish)	-	500	15% Discount for BIS Samples
7.2.1.1 Table3(Angle of taper (Note-1))	-	500	15% Discount for BIS Samples
10.7(Sulphated Ash Content)	-	1500	15% Discount for BIS Samples
5(CLASSIFICATION OF PIPES)	-	500	15% Discount for BIS Samples
7(DIMENSIONS-PIPE-Nominal Diameter)	-	500	15% Discount for BIS Samples
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	15% Discount for BIS Samples
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	15% Discount for BIS Samples
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	500	15% Discount for BIS Samples
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	15% Discount for BIS Samples
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	15% Discount for BIS Samples
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	500	15% Discount for BIS Samples
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500	15% Discount for BIS Samples
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500	15% Discount for BIS Samples
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	15% Discount for BIS Samples
7.2.1(DIMENSIONS-Socket)	-	500	15% Discount for BIS Samples
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	500	15% Discount for BIS Samples
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	500	15% Discount for BIS Samples
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	500	15% Discount for BIS Samples
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	500	15% Discount for BIS Samples
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	500	15% Discount for BIS Samples
8(SEALING RINGS)	-	1000	15% Discount for BIS Samples
9.1(PIPE ENDS)	-	500	15% Discount for BIS Samples
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	2500	15% Discount for BIS Samples
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	2500	15% Discount for BIS Samples
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	2500	15% Discount for BIS Samples
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	2500	15% Discount for BIS Samples
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	2500	15% Discount for BIS Samples
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	3000	15% Discount for BIS Samples
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	3000	15% Discount for BIS Samples
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	3000	15% Discount for BIS Samples
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	3000	15% Discount for BIS Samples
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	3000	15% Discount for BIS Samples
11.2(Resistance to External Blows at 0°C)	-	1500	15% Discount for BIS Samples
10.3(Effect on Water Test)	-	3000	15% Discount for BIS Samples
6.1.2(PVC Resin)	-	3500	15% Discount for BIS Samples
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	500	15% Discount for BIS Samples
7.1.4(Length)	-	500	15% Discount for BIS Samples
6.1.1(VCM Content)	-	1500	15% Discount for BIS Samples
13(Marking)	-	500	15% Discount for BIS Samples

Complete

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	200	15% Discount for BIS Samples
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	4000	15% Discount for BIS Samples
Cl.7.1(Mean outside diameter, outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	500	15% Discount for BIS Samples
Cl.7.1( outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	500	15% Discount for BIS Samples
Cl.7.1( wall thickness at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	500	15% Discount for BIS Samples
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	500	15% Discount for BIS Samples
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	500	15% Discount for BIS Samples
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	500	15% Discount for BIS Samples
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	500	15% Discount for BIS Samples
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	500	15% Discount for BIS Samples
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	500	15% Discount for BIS Samples
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	500	15% Discount for BIS Samples
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	500	15% Discount for BIS Samples
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	1500	15% Discount for BIS Samples
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1000	15% Discount for BIS Samples
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1000	15% Discount for BIS Samples
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	1500	15% Discount for BIS Samples
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	15% Discount for BIS Samples
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane )	-	1500	15% Discount for BIS Samples
8.6(Effect on Water Test)	-	3000	15% Discount for BIS Samples
14(Marking)	-	500	15% Discount for BIS Samples

Complete

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	500	15% Discount for BIS Samples
6.2.1 Annex B(Chloride Content of Resin)	-	2000	15% Discount for BIS Samples
6.3(Compound Properties)	-	1500	15% Discount for BIS Samples
6.3.1 Annex B(Chloride content)	-	2000	15% Discount for BIS Samples
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	1500	15% Discount for BIS Samples
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	1500	15% Discount for BIS Samples
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	500	15% Discount for BIS Samples
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	500	15% Discount for BIS Samples
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	500	15% Discount for BIS Samples
7.1.3 (Effective length)	-	500	15% Discount for BIS Samples
8(Pipe Ends)	-	500	15% Discount for BIS Samples
9.1(Visual Appearance)	-	500	15% Discount for BIS Samples
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	1500	15% Discount for BIS Samples
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	1500	15% Discount for BIS Samples
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	1500	15% Discount for BIS Samples
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	1500	15% Discount for BIS Samples
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	1500	15% Discount for BIS Samples
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	1500	15% Discount for BIS Samples
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	1500	15% Discount for BIS Samples
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	1500	15% Discount for BIS Samples
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	2000	15% Discount for BIS Samples
9.6 IS 12235(Part 14)(Density)	-	2500	15% Discount for BIS Samples
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	3500	15% Discount for BIS Samples
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	3500	15% Discount for BIS Samples
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	3500	15% Discount for BIS Samples
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	10000	15% Discount for BIS Samples
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	2500	15% Discount for BIS Samples
10.4 IS 12235(Part 19)(Flattening Test)	-	1500	15% Discount for BIS Samples
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	2000	15% Discount for BIS Samples
6.3(K value Test)	-	1500	15% Discount for BIS Samples
5 Table 1(Classification of pipes)	-	-	-
6.2.1 Annex B(Chloride Content of Resin)	-	-	-
6.3(Compound Properties)	-	-	-
6.3.1 Annex B(Chloride content)	-	-	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	-	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	-	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	-	-
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	-	-
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	-	-
7.1.3 (Effective length)	-	-	-
8(Pipe Ends)	-	-	-
9.1(Visual Appearance)	-	-	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	-	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	-	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	-	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	-	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	-	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	-	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	-	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	-	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	-	-
9.6 IS 12235(Part 14)(Density)	-	-	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	-	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	-	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	-	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	-	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	-	-
10.4 IS 12235(Part 19)(Flattening Test)	-	-	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	-	-
6.3(K value Test)	-	-	-
9.2 IS 12235 (Part 3)(Opacity)	-	-	-

Complete

IS 4824 (2022)

Bead wires for tyres - Specification

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Clause 6.1 - Table 1"(Carbon)	-	500	For BIS Samples 11000/- & For others 15000/-
"Clause 6.1 - Table 1"(Silicon)	-	500	For BIS Samples 11000/- & For others 15000/-
"Clause 6.1 - Table 1"(Mangnese)	-	500	For BIS Samples 11000/- & For others 15000/-
"Clause 6.1 - Table 1"(Sulphur)	-	500	For BIS Samples 11000/- & For others 15000/-
"Clause 6.1 - Table 1"(Phosphorous)	-	500	For BIS Samples 11000/- & For others 15000/-
"Clause 6.1 - Table 1"(Nitrogen)	-	500	For BIS Samples 11000/- & For others 15000/-
Clause 7.4.1 - Table 5(Protective Coating)	-	2000	For BIS Samples 11000/- & For others 15000/-
"Clause 7.2.2 and 7.2.3 - Table 3"(Tensile Strength)	-	1500	For BIS Samples 11000/- & For others 15000/-
"Clause 7.2.2 and 7.2.3 - Table 3"(Minimum Elongation at rupture)	-	1500	For BIS Samples 11000/- & For others 15000/-
"Clause 7.2.2 and 7.2.3 - Table 3"(0.2 percent proof strength)	-	1500	For BIS Samples 11000/- & For others 15000/-
"Clause 7.3 - Table 4"(Torsion Test)	-	1000	For BIS Samples 11000/- & For others 15000/-
Clause 7.4.2(Surface Quality)	-	500	For BIS Samples 11000/- & For others 15000/-
Clause 7.5.3(Wire Straightness)	-	500	For BIS Samples 11000/- & For others 15000/-
Clause 7.6.1(Dimensions)	-	500	For BIS Samples 11000/- & For others 15000/-
Clause 7.6.3(Out of Roundness)	-	500	For BIS Samples 11000/- & For others 15000/-
Clause 7.6.4(Adhesion Test)	-	2500	For BIS Samples 11000/- & For others 15000/-

Complete

IS 17875 (2022)

Stainless Steel seamless pipes and tubes for general service

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	3000	For BIS Samples 12000/- & For others 15000/-
10.1 (Table No.- 4)(Tensile Test,Mpa - IS 1608)	-	4000	For BIS Samples 12000/- & For others 15000/-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	1500	For BIS Samples 12000/- & For others 15000/-
13 (Table No.- 7)(Flaring Test)	-	1500	For BIS Samples 12000/- & For others 15000/-
14(Flattaning Test-IS 2328)	-	1500	For BIS Samples 12000/- & For others 15000/-
15.1 (Table No.- 8)(Grain Size,No.-IS 4748)	-	1500	For BIS Samples 12000/- & For others 15000/-
17(Leak Tighteness Test)	-	2000	For BIS Samples 12000/- & For others 15000/-
18("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	2500	For BIS Samples 12000/- & For others 15000/-
21(Workmanship, Finish and Appearance)	-	1000	For BIS Samples 12000/- & For others 15000/-
23 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	1000	For BIS Samples 12000/- & For others 15000/-

Complete

IS 17876 (2022)

Stainless steel welded pipes and tubes for general service

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	3000	For BIS Samples 12000/- & For others 15000/-
10.1 (Table No.- 4)(Tensile Test,Mpa)	-	4000	For BIS Samples 12000/- & For others 15000/-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	1500	For BIS Samples 12000/- & For others 15000/-
13 (Table No.- 7)(Flange Test-IS 2330)	-	1500	For BIS Samples 12000/- & For others 15000/-
14(Reverse Flattaning Test)	-	1000	For BIS Samples 12000/- & For others 15000/-
15(Flattaning Test-IS 2328)	-	1500	For BIS Samples 12000/- & For others 15000/-
16 (Table No.- 8)(Grain Size,No.-IS 4748)	-	1500	For BIS Samples 12000/- & For others 15000/-
18(Leak Tighteness Test)	-	2000	For BIS Samples 12000/- & For others 15000/-
19("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	2500	For BIS Samples 12000/- & For others 15000/-
22(Workmanship, Finish and Appearance)	-	500	For BIS Samples 12000/- & For others 15000/-
24 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	500	For BIS Samples 12000/- & For others 15000/-

Complete

IS 3748 (1990)

Tool and die steels - Specification (Second Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1, 7.2, 12.1 & Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For BIS Samples 10500/- & For others 12000/-
Cl 7.1, 7.2, 12.1 & Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For BIS Samples 10500/- & For others 12000/-
Cl 7.1, 7.2, 12.1 & Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For BIS Samples 10500/- & For others 12000/-
Cl 7.1, 7.2, 12.1 & Table 1(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For BIS Samples 10500/- & For others 12000/-
Cl 7.1, 7.2, 12.1 & Table 1(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For BIS Samples 10500/- & For others 12000/-
Cl 7.1, 7.2, 12.1 & Table 1(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For BIS Samples 10500/- & For others 12000/-
Cl 7.1, 7.2, 12.1 & Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For BIS Samples 10500/- & For others 12000/-
Cl 7.1, 7.2, 12.1 & Table 1(Tungsten- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For BIS Samples 10500/- & For others 12000/-
Cl 7.1, 7.2, 12.1 & Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For BIS Samples 10500/- & For others 12000/-
Cl 7.1, 7.2, 12.1 & Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For BIS Samples 10500/- & For others 12000/-q
Cl 7.1, 7.2, 12.1 & Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For BIS Samples 10500/- & For others 12000/-
Cl 7.1, 7.2, 12.1 & Table 1(Cobalt- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For BIS Samples 10500/- & For others 12000/-
Cl 7.1, 7.2, 12.1 & Table 1(Tin- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For BIS Samples 10500/- & For others 12000/-
6(Freedom from defects)	-	500	For BIS Samples 10500/- & For others 12000/-
9.1(Hardness , max-IS 1500 )	-	1500	For BIS Samples 10500/- & For others 12000/-
10(Dimensions and Tolerances, mm)	-	1000	For BIS Samples 10500/- & For others 12000/-
13(Ultra sound testing)	-	3000	For BIS Samples 10500/- & For others 12000/-
14.7(vii) Diistribution of carbides)	-	2500	For BIS Samples 10500/- & For others 12000/-
14.3(iii)Macro etch test)	-	2000	For BIS Samples 10500/- & For others 12000/-
14.1(i) Shephard's P.F.Test)	-	2000	For BIS Samples 10500/- & For others 12000/-

Complete

IS 191 (2007)

Copper - Specification (Fourth Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1- Table 2(L)	-	300	8500/- for BIS Samples
5.1- Table 2(L1)	-	300	8500/- for BIS Samples
5.1- Table 2(h)	-	300	8500/- for BIS Samples
5.1- Table 2(h1)	-	300	8500/- for BIS Samples
5.1- Table 2(b)	-	300	8500/- for BIS Samples
5.1- Table 2(b1)	-	300	8500/- for BIS Samples
5.1- Table 2(R)	-	300	8500/- for BIS Samples
5.1- Table 2(R1)	-	300	8500/- for BIS Samples
5.1- Table 2(R2 )	-	300	8500/- for BIS Samples
5.1- Table 2(α )	-	300	8500/- for BIS Samples
5.1- Table 2( β )	-	300	8500/- for BIS Samples
5.1- Table 2(γ)	-	300	8500/- for BIS Samples
5.2(Billets)	-	300	8500/- for BIS Samples
5.4-Table 3 (For Billets)(Mass)	-	300	8500/- for BIS Samples
5.2-Table 3 (For Billets)(Diameter)	-	300	8500/- for BIS Samples
5.2-Table 3 (For Billets)(Length)	-	300	8500/- for BIS Samples
5.2-Table 3 (For Billets)(Deviation from straightness per 1000 mm length)	-	300	8500/- for BIS Samples
5.4-Table 3 (Vertically continuously cast wire bars)(Mass)	-	300	8500/- for BIS Samples
5.3-Table 3 (Vertically continuously cast wire bars)(Width)	-	300	8500/- for BIS Samples
5.3-Table 3 (Vertically continuously cast wire bars)(thickness )	-	300	8500/- for BIS Samples
5.3-Table 3 (Vertically continuously cast wire bars)(Other dimention)	-	300	8500/- for BIS Samples
5.4-Table 3 (Vertically static cast wire bars)(Mass)	-	300	8500/- for BIS Samples
5.3-Table 3 (Vertically static cast wire bars)(Width)	-	300	8500/- for BIS Samples
5.3-Table 3 (Vertically static cast wire bars)(thickness )	-	300	8500/- for BIS Samples
5.3-Table 3 (Vertically static cast wire bars)(Other dimention)	-	300	8500/- for BIS Samples
5.4-Table 3 (Ingots)(Mass)	-	300	8500/- for BIS Samples
5.4-Table 3 (Cast cakes)(Mass)	-	300	8500/- for BIS Samples
5.3-Table 3 (Cast cakes)(Width)	-	300	8500/- for BIS Samples
5.3-Table 3 (Cast cakes)(thickness )	-	300	8500/- for BIS Samples
5.3-Table 3 (Cast cakes)(Deviation from straightness per 1000 mm length)	-	300	8500/- for BIS Samples
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Silver- IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Copper (any Silver present to be counted as copper)-IS440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Phosphorus- IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Arsenic- IS440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Antimony-IS440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Bismuth-IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Iron IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Lead IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Nickel IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Oxygen IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Selenium - IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Sulphur- IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Tin - IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Total Impurities- IS 440)	-	500	8500/- for BIS Samples
8.1(FREEDOM FROM DEFECTS)	-	500	8500/- for BIS Samples
9.1- Table 5(Mass Resistivity- IS 3635)	-	2500	8500/- for BIS Samples
10(HYDROGEN EMBRITTLEMENT TEST- IS 191)	-	2000	8500/- for BIS Samples
5.1- Table 2(L)	-	300	8500/- for BIS Samples
5.1- Table 2(L1)	-	300	8500/- for BIS Samples
5.1- Table 2(h)	-	300	8500/- for BIS Samples
5.1- Table 2(h1)	-	300	8500/- for BIS Samples
5.1- Table 2(b)	-	300	8500/- for BIS Samples
5.1- Table 2(b1)	-	300	8500/- for BIS Samples
5.1- Table 2(R)	-	300	8500/- for BIS Samples
5.1- Table 2(R1)	-	300	8500/- for BIS Samples
5.1- Table 2(R2 )	-	300	8500/- for BIS Samples
5.1- Table 2(α )	-	300	8500/- for BIS Samples
5.1- Table 2( β )	-	300	8500/- for BIS Samples
5.1- Table 2(γ)	-	300	8500/- for BIS Samples
5.2(Billets)	-	300	8500/- for BIS Samples
5.4-Table 3 (For Billets)(Mass)	-	300	8500/- for BIS Samples
5.2-Table 3 (For Billets)(Diameter)	-	300	8500/- for BIS Samples
5.2-Table 3 (For Billets)(Length)	-	300	8500/- for BIS Samples
5.2-Table 3 (For Billets)(Deviation from straightness per 1000 mm length)	-	300	8500/- for BIS Samples
5.4-Table 3 (Vertically continuously cast wire bars)(Mass)	-	300	8500/- for BIS Samples
5.3-Table 3 (Vertically continuously cast wire bars)(Width)	-	300	8500/- for BIS Samples
5.3-Table 3 (Vertically continuously cast wire bars)(thickness )	-	300	8500/- for BIS Samples
5.3-Table 3 (Vertically continuously cast wire bars)(Other dimention)	-	300	8500/- for BIS Samples
5.4-Table 3 (Vertically static cast wire bars)(Mass)	-	300	8500/- for BIS Samples
5.3-Table 3 (Vertically static cast wire bars)(Width)	-	300	8500/- for BIS Samples
5.3-Table 3 (Vertically static cast wire bars)(thickness )	-	300	8500/- for BIS Samples
5.3-Table 3 (Vertically static cast wire bars)(Other dimention)	-	300	8500/- for BIS Samples
5.4-Table 3 (Ingots)(Mass)	-	300	8500/- for BIS Samples
5.4-Table 3 (Cast cakes)(Mass)	-	300	8500/- for BIS Samples
5.3-Table 3 (Cast cakes)(Width)	-	300	8500/- for BIS Samples
5.3-Table 3 (Cast cakes)(thickness )	-	300	8500/- for BIS Samples
5.3-Table 3 (Cast cakes)(Deviation from straightness per 1000 mm length)	-	300	8500/- for BIS Samples
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Silver- IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Copper (any Silver present to be counted as copper)-IS440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Phosphorus- IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Arsenic- IS440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Antimony-IS440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Bismuth-IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Iron IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Lead IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Nickel IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Oxygen IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Selenium - IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Sulphur- IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Tin - IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Total Impurities- IS 440)	-	500	8500/- for BIS Samples
8.1(FREEDOM FROM DEFECTS)	-	500	8500/- for BIS Samples
9.1- Table 5(Mass Resistivity- IS 3635)	-	2500	8500/- for BIS Samples
10(HYDROGEN EMBRITTLEMENT TEST- IS 191)	-	2000	8500/- for BIS Samples
7.1 - Table 4(Tellurium- IS 440)	-	500	8500/- for BIS Samples
5.1- Table 2(L)	-	300	8500/- for BIS Samples
5.1- Table 2(L1)	-	300	8500/- for BIS Samples
5.1- Table 2(h)	-	300	8500/- for BIS Samples
5.1- Table 2(h1)	-	300	8500/- for BIS Samples
5.1- Table 2(b)	-	300	8500/- for BIS Samples
5.1- Table 2(b1)	-	300	8500/- for BIS Samples
5.1- Table 2(R)	-	300	8500/- for BIS Samples
5.1- Table 2(R1)	-	300	8500/- for BIS Samples
5.1- Table 2(R2 )	-	300	8500/- for BIS Samples
5.1- Table 2(α )	-	300	8500/- for BIS Samples
5.1- Table 2( β )	-	300	8500/- for BIS Samples
5.1- Table 2(γ)	-	300	8500/- for BIS Samples
5.2(Billets)	-	300	8500/- for BIS Samples
5.4-Table 3 (For Billets)(Mass)	-	300	8500/- for BIS Samples
5.2-Table 3 (For Billets)(Diameter)	-	300	8500/- for BIS Samples
5.2-Table 3 (For Billets)(Length)	-	300	8500/- for BIS Samples
5.2-Table 3 (For Billets)(Deviation from straightness per 1000 mm length)	-	300	8500/- for BIS Samples
5.4-Table 3 (Vertically continuously cast wire bars)(Mass)	-	300	8500/- for BIS Samples
5.3-Table 3 (Vertically continuously cast wire bars)(Width)	-	300	8500/- for BIS Samples
5.3-Table 3 (Vertically continuously cast wire bars)(thickness )	-	300	8500/- for BIS Samples
5.3-Table 3 (Vertically continuously cast wire bars)(Other dimention)	-	300	v
5.4-Table 3 (Vertically static cast wire bars)(Mass)	-	300	8500/- for BIS Samples
5.3-Table 3 (Vertically static cast wire bars)(Width)	-	300	8500/- for BIS Samples
5.3-Table 3 (Vertically static cast wire bars)(thickness )	-	300	8500/- for BIS Samples
5.3-Table 3 (Vertically static cast wire bars)(Other dimention)	-	300	8500/- for BIS Samples
5.4-Table 3 (Ingots)(Mass)	-	300	8500/- for BIS Samples
5.4-Table 3 (Cast cakes)(Mass)	-	300	8500/- for BIS Samples
5.3-Table 3 (Cast cakes)(Width)	-	300	v
5.3-Table 3 (Cast cakes)(thickness )	-	300	8500/- for BIS Samples
5.3-Table 3 (Cast cakes)(Deviation from straightness per 1000 mm length)	-	300	8500/- for BIS Samples
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Silver- IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Copper (any Silver present to be counted as copper)-IS440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Phosphorus- IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Arsenic- IS440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Antimony-IS440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Bismuth-IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Iron IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Lead IS 440)	-	500	8500/- for BIS Samples```
7.1 - Table 4(Nickel IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Oxygen IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Selenium - IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Sulphur- IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Tin - IS 440)	-	500	8500/- for BIS Samples
7.1 - Table 4(Total Impurities- IS 440)	-	500	8500/- for BIS Samples
8.1(FREEDOM FROM DEFECTS)	-	500	8500/- for BIS Samples
9.1- Table 5(Mass Resistivity- IS 3635)	-	2500	8500/- for BIS Samples
10(HYDROGEN EMBRITTLEMENT TEST- IS 191)	-	2000	8500/- for BIS Samples
7.1 - Table 4(Tellurium- IS 440)	-	500	8500/- for BIS Samples
13(Marking)	-	500	8500/- for BIS Samples

Complete

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

YOR LAB

Plot no.42/2,Survey no.83,Opp.Gondal Bypass BRTS Bus Stop,150 feet ring road,Rajkot, Rajkot, Rajkot, Gujarat, 360004

9825034335 yorlabindia@gmail.com

Scope List