BIS - LIMS (Laboratory Information Management System)

REACT COMPLIANCE AND TESTING LABORATORIES LLP

#3411, 3rd floor, Service Road, Vijayanagar, BENGALURU, Bengaluru Urban, Karnataka, 560040

9845716746 info@react-labs.com

Scope List

Reset

9 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

400000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Condition of use)	-	2000	NA
5.1(Mechanical Endurance)	-	1000	NA
5.2(Charge efficiency)	-	1000	NA
5.3(Deep discharge protection)	-	0	NA
5.4(Marking)	-	4000	NA
5.5(Dafety)	-	0	NA
5.6(Documentation)	-	0	NA
6(Finctional Characteristics)	-	0	NA
7(General test conditions)	-	0	NA
8.1(Capacity test)	-	20000	NA
8.2(Endurance test)	-	140000	NA
8.3(Charge retention test)	-	10000	NA
8.4(Cycle endurance in Photovoltaic application)	-	200000	NA
8.5(Sulphation Test)	-	10000	NA
8.6(Water loss test)	-	10000	NA
8.7(Non spillability)	-	2000	NA

Complete

10 Mar, 2027

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	NA
5(General Safety Considerations)	-	0	NA
5.1(General)	-	0	NA
5.2(Insulation and Wiring)	-	0	NA
5.3(Venting)	-	1500	NA
5.4(Temperature, Voltage and Current Management)	-	100	NA
5.5(Terminal Contacts)	-	1500	NA
5.6(Assembly of Cells into batteries)	-	0	NA
5.7(Quality Plan)	-	0	NA
5.8(Battery Safety Components)	-	0	NA
6(Type Test and Sample Size)	-	0	NA
7(Specific requirements and tests)	-	0	NA
7.1(Charging procedure for test purposes)	-	12500	NA
7.2(Intended Use)	-	14500	NA
7.3(Reasonably foreseeable misuse)	-	20500	NA
8(Information for safety)	-	1500	NA
8.1(General)	-	0	NA
8.2(Small Cell and battery safety information)	-	0	NA
9(Marking)	-	0	NA
9.1(Cell Marking)	-	0	NA
9.2(Battery Marking)	-	0	NA
9.3(Caution for ingestion of small cells and batteries)	-	0	NA
9.4(Other information)	-	0	NA
10(Packaging)	-	1000	NA

Complete

10 Mar, 2027

IS 16169 (2014)

Utility - Interconnected photovoltaic inverters - Test procedure of islanding prevention measures

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6, (Elec)(Test for single or multi-phase inverter)	-	55000	NA
7(Documentation)	-	10000	NA
6 to 6.2, (Elec)(Test for single or multi-phase inverter to Pass/fail criteria)	-	35000	NA
6(Test for single or multi-phase inverter)	-	45000	-
7(Documentation)	-	10000	-
6 to 6.2(Test for single or multi-phase inverter to Pass/fail criteria)	-	45000	-

Complete

10 Mar, 2027

IS 16221 : Part 1 (2016)

Safety of Power Converters for use in Photovoltaic Power Systems Part 1 General Requirements

270000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General testing requirements)	-	70000	NA
5(Marking and documentation)	-	20000	NA
6(Environmental Requirements and conditions)	-	10000	NA
7(Protection against electric shock and energy hazards)	-	70000	NA
8(Protection Against mechanical Hazards)	-	10000	NA
9(Protection Against Fire Hazards)	-	10000	NA
10(Protection against Sonic Pressure hazards)	-	4000	NA
11(Protection against liquid hazards)	-	4000	NA
12(Chemical hazards)	-	2000	NA
13(Physical requirements)	-	70000	NA
14(Components)	-	1000	NA
15(Software and firmware performing safety functions)	-	1000	NA

Complete

10 Mar, 2027

IS 16221 : Part 2 (2015)

Safety of power converters for use in photovoltaic power systems: Part 2 particular requirements for inverters

170000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	395000	NA
5(Marking and documentation)	-	5000	NA
6(Environmental requirements and conditions)	-	5000	NA
7(Protection against electric shock and energy hazards)	-	5000	NA
8(Protection against Mechanical Hazards)	-	5000	NA
9(Protection against Fire Hazards)	-	5000	NA
11(Protection against Liquid Hazards)	-	5000	NA
12(Protection against Chemical Hazards)	-	5000	NA
10(Protection against Sonic Pressure Hazards)	-	5000	NA
13(Physical Requirements)	-	5000	NA
14(Components)	-	0	NA

Complete

10 Mar, 2027

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	2000	NA
6(Hazardous radiations)	-	2000	NA
7(Heating under normal operating conditions)	-	2000	NA
8(Constructional requirements with regard to the protection against electric shock)	-	2000	NA
9(Electric shock hazard under normal operating conditions)	-	5000	NA
10(Insulation requirements)	-	15000	NA
11(Fault conditions)	-	2000	NA
12(Mechanical strength)	-	15000	NA
13(CLEARANCES and CREEPAGE DISTANCES)	-	5000	NA
15(TERMINALS)	-	2000	NA
16(External flexible cords)	-	1000	NA
17(Electrical connections and mechanical fixings)	-	2000	NA
19(Stability and mechanical hazards)	-	5000	NA
20(Resistance to fire)	-	2000	NA
14(Components)	-	1000	NA

Complete

10 Mar, 2027

IS 16169 (2019)

Utility - Interconnected photovoltaic inverters - Test procedure of islanding prevention measures (First Revision)

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Test for single or multi-phase inverter)	-	80000	-
Annex A(Islanding as it applies to PV systems)	-	10000	-
Annex B(Test for independent islanding device)	-	10000	-

Complete

10 Mar, 2027

IS Included w.e.f. 07-09-2020

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.6(Power interface .)	-	1200	-
1.7(Markings and instructions)	-	800	-
2.1(Protection from electric shock and energy hazards)	-	6000	-
2.2(SELV circuits)	-	2400	-
2.3(TNV circuits)	-	7000	-
2.4(Limited current circuits)	-	1000	-
2.5(Limited power sources .)	-	1000	-
2.6(Provisions for earthing and bonding)	-	1000	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	1000	-
2.8(Safety interlocks)	-	1000	-
2.9(Electrical insulation)	-	12000	-
2.10(Clearances, creepage distances and distances through insulation)	-	6800	-
3.1(General)	-	500	-
3.2(Connection to a mains supply)	-	1200	-
3.3(Wiring terminals for connection of external conductors)	-	500	-
3.4(Disconnection from the mains supply)	-	500	-
3.5(Interconnection of equipment)	-	500	-
4.1(Stability)	-	1200	-
4.2(Mechanical strength)	-	3700	-
4.3(Design and construction)	-	1000	-
4.4(Protection against hazardous moving parts)	-	400	-
4.5(Thermal requirements)	-	2400	-
4.6(Openings in enclosures)	-	1200	-
4.7(Resistance to fire)	-	1000	-
5.1(Touch current and protective conductor curren)	-	1200	-
5.2(Electric strength)	-	1500	-
5.3(Abnormal operating and fault conditions)	-	3000	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	500	-
6.3(Protection of the telecommunication wiring system from overheating)	-	500	-
7.1(General)	-	500	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	500	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	500	-
7.4(Insulation between primary circuits and cable distribution systems)	-	500	-
1.5(Components)	-	0	-

Complete

10 Mar, 2027

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Components)	-	1500	-
4.6(Power interface)	-	1500	-
4.7(Marking & instructions)	-	3000	-
5.1(Protection against shock and energy hazards)	-	3000	-
5.2(Requirement of auxiliary circuits)	-	10000	-
5.3(Protective earthing and bonding)	-	3000	-
5.4(AC and DC power isolation)	-	1500	-
5.5(Over current and earth fault condition)	-	1500	-
5.6(Safety interlocks)	-	1500	-
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	4000	-
6.1(Wiring, connections and supply)	-	1500	-
6.2(Connection to power)	-	1500	-
6.3(Wiring terminals for external power conductors)	-	1500	-
7.1(Enclosure)	-	1500	-
7.2(STABILITY)	-	1500	-
7.3(MECHANICAL STRENGTH)	-	5500	-
7.4(Construction details)	-	1500	-
7.5(Resistance to fire)	-	1500	-
7.6(Battery location)	-	1500	-
7.7(Temperature rise)	-	1500	-
8.1(General procision for earth leakage)	-	1500	-
8.2(Electric Strength)	-	1500	-
8.3(Abnormal operating and fault conditions)	-	5000	-
9.0(Connection to telecommunication networks)	-	4000	-

Complete

10 Mar, 2027

IS Included w.e.f. 13/3/2018 Excluding following tests: Components (cl.4.5/RD 1.5); Moving parts (cl.5.6/RD 2.8.5); Overload test (cl.5.6/RD 2.8.7.2); Endurance test (cl.5.6/RD 2.8.7.3); Semi-conductor devices (cl.5.7/RD 2.10.5.4); Insulation in wound components (cl.5.7/RD 2.10.5.11); Construction of printed circuit boards (cl.5.7/RD/ 2.10.6); Test on coated printed boards and coated components (cl.5.7/RD 2.10.8); Thermal cycling (cl.5.7/ RD 2.10.9); Test for pollution degree 1 environment and for insulating components (cl.5.7/RD 2.10.10); Enclosed sealing parts (cl.5.7/RD 2.10.12); Resistance to fire-Flammability test (cl.7.5, Annex A); Ventilation (cl. 7.6.7 & Annex M)

Bureau of Indian Standards

The National Standards Body of India

REACT COMPLIANCE AND TESTING LABORATORIES LLP

#3411, 3rd floor, Service Road, Vijayanagar, BENGALURU, Bengaluru Urban, Karnataka, 560040

9845716746 info@react-labs.com

Scope List