BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- sample@bis.gov.in

Scope List

Reset

861 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 9550 (2024)

Bright Steel Bars â Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-6 (Chemical Composition)	-
Cl-7 (mechanical properties)	-
Cl-8.2.1.1 (Tolerances on dimensions)	-
Clause. 7.0 (Brinell Hardness)	-
Clause. 6.0 (Sillicon)	-

-
-

IS 8088 (2025)

Tricycle Hand Propelled - Specification (Second revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5, Table 1 (SHAPE AND DIMENSIONS (i) Overall length)	-
5, Table 1 (SHAPE AND DIMENSIONS (ii) Overall Width)	-
5, Table 1 (SHAPE AND DIMENSIONS (iii) Overall Height)	-
5, Table 1 (SHAPE AND DIMENSIONS (iv) Width of foot rest)	-
5, Table 1 (SHAPE AND DIMENSIONS (v) Length of Foot rest)	-
5, Table 1 (SHAPE AND DIMENSIONS (vi) Clearance of foot rest from gorund)	-
5, Table 1 (SHAPE AND DIMENSIONS (vii) Arm rest from seat)	-
5, Table 1 (SHAPE AND DIMENSIONS (viii) Seat length)	-
5, Table 1 (SHAPE AND DIMENSIONS (ix) Seat width)	-
5, Table 1 (SHAPE AND DIMENSIONS (x) back height from seat)	-
5, Table 1 (SHAPE AND DIMENSIONS (xi) Length of steering handle)	-
5, Table 1 (SHAPE AND DIMENSIONS (xii) Height of rear wheel supporting frame)	-
5, Table 2 (SHAPE AND DIMENSIONS (xiii) Leaverage od steeing handle)	-
6.1 (Frame)	-
6.2 (Steering Handle Bar)	-
6.3 (Tyres and Tubes)	-
6.4 (Wheel Rims)	-
6.5 (Mudguards)	-
6.6 (Brakes)	-
6.7 (Sprocket and Free Wheel)	-
6.8 (Front Wheel Hub)	-
6.9 (Rear Wheel Hub)	-
6.1 (Drive Chain)	-
6.11 (Chain Cover)	-
6.12 (Armrests)	-
6.13 (Tool Box)	-
6.14 (Lock)	-
6.16 (Lubrication)	-
6.17 (Keeping for crutches or walking sticks.)	-
6.18 (Accessories)	-
7.2 (FINISH)	-
8.1 (Load Test)	-
8.2 (Maneuverability)	-
8.3 (Static Load Test)	-
8.4.1 (Brake Test)	-
8.4.2 (Brake Test)	-
8.5 (Test for Finish)	-
6.15 (Hood)	-

-
-

IS 13779 (1999)

AC static watihour meters, class 1 and 2 - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
-

IS 1287 (1993)

Electric toasters - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
-

IS 302 : Part 2 : Sec 202 (1992)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 202 electric stoves

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
-

IS 7154 (1994)

Mains operated electric hair dryers (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
-

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
OK

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
OK

IS 16444 : Part 2 (2017)

AC static transformer operated watthour and var - Hour smart meters, class 0.2 S, 0.5 S and 1.0 S: Part 2 specification transformer operated smart meters

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
-

IS 398 : Part 3 (1976)

Specification for aluminium conductors for overhead transmission purposes: Part 3 aluminium conductors, aluminized steel reinforced (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
OK

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6 (Classification- IS 302-1)	-
Cl. 6 IS 302-2-9 (Classification- IS 302-1)	-
6 (Classification- IS 302-1)	-
Cl. 7 IS 302-2-9 (Marking and Instruction)	-
Cl. 7 (Verification)	-
7.14 (Legibility & Durability of Markings test)	-
7.1 to 7.13, 7.15, 7.16 (Marking)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking, IS 302-2-9)	-
7.3 (Marking- IS 302-1)	-
7.4 (Marking- IS 302-1)	-
7.5 (Marking- IS 302-1)	-
7.5 (Marking- IS 302-1)	-
7.6 (Marking- IS 302-1)	-
7.7 (Marking- IS 302-1)	-
7.8 (Marking- IS 302-1)	-
7.9 (Marking- IS 302-1)	-
7.1O (Marking- IS 302-1)	-
7.11 (Marking- IS 302-1)	-
7.12 (Marking- IS 302-2-9)	-
7.13 (Marking- IS 302-1)	-
7.14 (Marking- IS 302-1)	-
7.14 (Marking- IS 302-2-9)	-
7.15 (Marking- IS 302-1)	-
7.101 (Marking- IS 302-2-9)	-
Cl.8 (Verification)	-
Cl. 8 IS 302-2-9 (Protection against access to live parts)	-
Cl. 9 IS 302-2-9 (Starting of motor operated appliances)	-
Cl. 10 IS 302-2-9 (Power Input and Current )	-
10.1 & 10.2 -Table No. 1, Table No. 2 (Power Input and Current)	-
Cl. 11 IS 302-2-9 (Heating)	-
11.101 (Heating)	-
11.1 to 11.8, Table No.-3 (Heating)	-
11 (Temperature Rise/ Heating)	-
11 (Temperature Rise/ Heating)	-
11 (Heating, IS 302-1, Table -3)	-
11 (Heating, IS 302-1, Table -3)	-
11 (Heating, IS 302-1, Table -3)	-
11 (Heating, IS 302-1, Table -3)	-
Cl. 13.3 IS 302-2-9 (Leakage Current & Electric Strength at Operating Temperature)	-
13.3 and Table No.- 4 (Electric strength test)	-
Cl. 14 IS 302-2-9 (Transient overvoltage)	-
Cl. 15 IS 302-2-9 (Moisture Resistance)	-
15.2 (Moisture resistance)	-
15.3 (Moisture resistance)	-
15.101 (Moisture Resistance)	-
Cl. 16 IS 302-2-9 (Leakage Current and Electric strength )	-
16.3 (Insulation resistance test)	-
Cl. 17 IS 302-2-9 (Overload protection of transformers and associated circuits.)	-
Cl. 19 IS 302-2-9 (Abnormal Operation )	-
19.3 (Abnormal Operation, IS 302-1)	-
19.4 (Abnormal Operation, IS 302-1)	-
19.5 (Abnormal Operation, IS 302-1)	-
19.6 (Abnormal Operation, IS 302-1)	-
19.7 (Abnormal Operation, IS 302-1)	-
19.9 (Abnormal Operation, IS 302-1)	-
19.1 to 19.13, Table No. - 9 (ABNORMAL OPERATION)	-
19.11.4.1 (Electrostatic discharges)	-
19.11.4.2 (Radiated fields)	-
19.11.4.3 (Fast transient bursts)	-
19.11.4.4 (Surge immunity test)	-
19.11.4.5 (Immunity to conducted discharges)	-
19.11.4.6 (Class 3 Voltage dips and interruptions)	-
19.11.4.7 (Harmonics)	-
19.13 (Abnormal Operation as per Cl 19, IS 302-1)	-
19.13 (Abnormal Operation as per Cl 19, IS 302-1)	-
19.13 (Abnormal Operation as per Cl 19, IS 302-1)	-
19.101 (ABNORMAL OPERATION)	-
19.102 (ABNORMAL OPERATION)	-
19.103 (ABNORMAL OPERATION)	-
19.104 (ABNORMAL OPERATION)	-
20.1 (Stability and mechanical hazards)	-
20.2 (Stability and mechanical hazards)	-
20.101 (Stability & Mechanical Hazards, IS 302-2-9)	-
21.1 (MECHANICAL STRENGTH)	-
21.2 (MECHANICAL STRENGTH)	-
21.3 (Mechanical Strength, IS 302-1)	-
21.101 (Mechanical Strength, IS 302-2-9)	-
Cl. 22 IS 302-2-9 (Construction )	-
22.1 (Constructions)	-
22.2 (Constructions)	-
22.3 (Constructions)	-
22.4 (Constructions)	-
22.5 (Constructions)	-
22.6 (Constructions)	-
22.7 to 22.10 (Constructions)	-
22.11 (Constructions)	-
22.12 (Constructions)	-
22.13 to 22.48 (Constructions)	-
22.101 (Construction, IS 302-2-9)	-
22.102 (Construction, IS 302-2-9)	-
22.103 (Construction, IS 302-2-9)	-
22.104 (Construction, IS 302-2-9)	-
22.105 (Construction, IS 302-2-9)	-
22.106 (Construction, IS 302-2-9)	-
22.107 (Construction, IS 302-2-9)	-
22.108 (Construction, IS 302-2-9)	-
22.109 (Construction, IS 302-2-9)	-
22.110 (Construction, IS 302-2-9)	-
22.111 (Construction, IS 302-2-9)	-
22.112 (Construction, IS 302-2-9)	-
23.1 (Internal Wiring, IS 302-1)	-
23.2 (Internal Wiring, IS 302-1)	-
23.3 (Internal Wiring, IS 302-1)	-
23.4 (Internal Wiring, IS 302-1)	-
23.6 (Internal Wiring, IS 302-1)	-
23.7 (Internal Wiring, IS 302-1)	-
23.8 (Internal Wiring, IS 302-1)	-
23.9 (Internal Wiring, IS 302-1)	-
23.10 (Internal Wiring, IS 302-1)	-
24.1 (Components)	-
24.101 (Components)	-
24.102 (Component, IS 302-2-9)	-
24 (Components)	-
25.1 (Supply connection and external flexible cords)	-
25.2 (Supply connection and external flexible cords)	-
25.3 (Supply connection and external flexible cords)	-
25.4 (Supply connection and external flexible cords)	-
25.5 (Supply connection and external flexible cords, IS 302-1)	-
25.6 (Supply connection and external flexible cords, IS 302-1)	-
25.7 (Supply Connection and External Flexible Cords, IS 302-2-9)	-
25.8 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.9 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.10 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.11 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.12 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.13 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.14 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.15 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.17 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.18 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.19 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.20 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.21 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.22 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.23 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.24 (Supply Connection and External Flexible Cords, IS 302-1)	-
26.1 to 26.8 (Terminals for external conductors)	-
26.9 (Terminals for external conductors)	-
Cl. 26 IS 302-2-9 (Terminal For External Conductors )	-
27.1 to 27.4 (Provision for earthing)	-
27.5 (Provision for earthing)	-
27.6 (Provision for earthing)	-
28.1, Table No.-14 (Screws and connections)	-
28.2 to 28.4 (Screws and connections)	-
29.1, Table No.- 16, Table No.- 17 & Table No.18 (Clearances, creepage distances and solid insulation)	-
29.2 (Clearances, creepage distances and solid insulation)	-
29.3 (Clearances, creepage distances and solid insulation)	-
30.1 (Resistance to heat and fire)	-
30.2 (Resistance to heat and fire)	-

-
-

IS 9873 : Part 1 (2025)

SAFETY OF TOYS PART 1: SAFETY ASPECTS RELATED TO MECHANICAL AND PHYSICAL PROPERTIES (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1,4.1.1 &4.1.2 -5.1 to 5.23 (General)	-
4.2-5.24.2 (Reasonably foreseeable abuse, Drop test)	-
4.2-5.24.3 (Reasonably foreseeable abuse, Tip-over test for large and bulky toys)	-
4.2-5.24.4 (Reasonably foreseeable abuse, Dynamic strength test for wheeled ride-on toys other than toy scooters)	-
4.2-5.24.5 (Reasonably foreseeable abuse, Torque test)	-
4.2-5.24.6.1 (Reasonably foreseeable abuse, Tension test (General))	-
4.2-5.24.6.2 (Reasonably foreseeable abuse, Tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys)	-
4.2-5.24.6.3 (Reasonably foreseeable abuse, Tension test for pompoms)	-
4.2-5.24.6.4 (Reasonably foreseeable abuse, Tension test for protective components)	-
4.2-5.24.6.5 (Reasonably foreseeable abuse, Tension test for a projectile with a suction cup)	-
4.2-5.24.6.6 (Reasonably foreseeable abuse, Perpendicular Tension test for rotor blades)	-
4.2-5.24.6.7 (Reasonably foreseeable abuse, Tension test for rotor blades)	-
4.2-5.24.7 (Reasonably foreseeable abuse, Compression test)	-
4.2-5.24.8 (Reasonably foreseeable abuse, Flexure test)	-
4.3, 4.3.1 (Material , Material quality)	-
4.3.2 -5.21 (Expanding materials,)	-
4.4 , 4.4.1 -5.24.2 (Small parts(for children under 36 months) Drop test)	-
4.4 , 4.4.1 -5.24.3 (Small parts(for children under 36 months) , Tip-over test for large and bulky toys)	-
4.4 , 4.4.2-5.2 (Small parts(for children 36 months and over but under 72 months) , Small parts test)	-
4.5,4.5.1 & 4.5.1.2 -5.3 (Shape, size & strength of certain toys(Squeeze toys,rattles & certain other toys & components of toys), Test for shape & size of certain toys)	-
4.5 ,4.5.1 & 4.5.1.3-5.3 (Shape, size & strength of certain toys(Other toys or components of toys with nearly spherical,hemispherical,circular flared or dome-shaped ends of toys having a mass less than 0.5 kg & intended for children under 18 months), Test for shape & size of certain toys)	-
4.5 ,4.5.1 & 4.5.1.4-5.3 (Shape, size & strength of certain toys (Toys fasteners(e.g.nails ,bolts ,screws & pegs) with nearly spherical, hemispherical or dome-shaped ends intended for children 18 months & over but under 48 months), Test for shape & size of certain toys)	-
4.5 ,4.5.2-5.4 (Small balls (for children under 36 months), Small balls test)	-
4.5 ,4.5.2 (Small balls (for children 36 months and over but under 96 months), Warning)	-
4.5 ,4.5.3-5.24.6.3 (Pompoms (for children under 36 months), Tension test for pompoms)	-
4.5 ,4.5.4-5.6 (Pre-school play figures(for children under 36 months), Test for pre-school play figures)	-
4.5 ,4.5.5 (Toys pacifiers (for children under 36 months), Nipple length)	-
4.5 ,4.5.6-5.10 (Balloons, Determination of thickness of plastic film & sheeting (Individual thickness))	-
4.5 ,4.5.6-5.10 (Balloons, Determination of thickness of plastic film & sheeting (Average thickness))	-
4.5 ,4.5.6 (Balloons, Warning)	-
4.5,4.5.7 (Marbles, Warning)	-
4.5,4.5.8 (a) (Hemispheric-shaped toys, Number of opening)	-
4.5,4.5.8(b) (Hemispheric-shaped toys, Rib-through-cup centre)	-
4.5,4.5.8(c) (Hemispheric-shaped toys, Number of opening)	-
4.5,4.5.8(d) (Hemispheric-shaped toys, Repeated scalloped-edge pattern around the entire rim)	-
4.6, 4.6.1-5.8 (Edges, (Accessible sharp edges of glass or metal) Sharp-edge test)	-
4.6, 4.6.2(a) (Edges, (Functional sharp egdes for children under 36 months))	-
4.6, 4.6.2(b) (Edges, (Functional sharp egdes for children 36 months & over but under 96 months))	-
4.6, 4.6.3-5.8 (Edges, (Edges on metal toys for children under 96 months) , Sharp-edge test)	-
4.6, 4.6.4 (Edges, (Edges on moulded toys for children under 96 months) ,)	-
4.6, 4.6.5-5.24.7 (Edges, (Edges on exposed bolts or threaded rods) , Compression test)	-
4.7, 4.7.1(a)-5.9 (Points (Accessible sharp points), Sharp-Point test)	-
4.7, 4.7.2(a) (Functional sharp points (for children under 36 months))	-
4.7, 4.7.2(b) (Functional sharp points(for children 36 months & over but under 96 months), Warning)	-
4.7, 4.7.3 (Wooden toys)	-
4.8 ,4.8.1-5.24.2 (Projections(General requirements), Drop test)	-
4.9(a)-5.24.8.2 (Metal wires and rods, Flexure test(wires & other metallic components intended to be bent))	-
4. 10 -5.10 (Plastic film or plastic bags in packaging and in toys, Determination of thickness of plastic film and sheeting(Individual thickness))	-
4. 10 -5.10 (Plastic film or plastic bags in packaging and in toys, Determination of thickness of plastic film and sheeting(Average thickness))	-
4.11.2 ,4.11.2.1(a)-5.11.2 (Cords in toys intended for children under 18 months (Cords with the potential to tangle)- Length of cords & electrical cable)	-
4.11.2 ,4.11.2.1(b)-5.11.3 (Cords in toys intended for children under 18 months (Cords with the potential to tangle)- Breakway feature separation test)	-
4.11.2 ,4.11.2.2 -5.11.2 (Cords in toys intended for children under 18 months (Other cords)- Length of cords & electrical cable)	-
4.11.3 ,4.11.3.1(a)-5.11.2 (Cords in toys intended for children 18 months & over but under 36 months cords with the potential to tangle)- Length of cords & electrical cable)	-
4.11.3 ,4.11.3.2 -5.11.2 (Cords in toys intended for children 18 months & over but under 36 months Other cords)- Length of cords & electrical cable)	-
4.11.3 ,4.11.3.2 (Cords in toys intended for children 18 months & over but under 36 months Other cords)- Warning)	-
4.11.3 ,4.11.3.3 (Cords in toys intended for children 18 months & over but under 36 months Other cords without a free end)- Warning)	-
4.11.4(a)-5.11.4 (Fixed loops and nooses intended for children under 36 months- Test for fixed loops and nooses)	-
4.11.5 -5.11.2 (Cords on pull toys - Length of cords & electrical cables)	-
4.11.6 (Electrical cables- Warning)	-
4.11.7- 5.11.1 (Diameter of certain cords intended for children under 36 months- Cord cross-sectional dimension)	-
4.11.8- 5.11.5 (Self-retracting cords intended for children under 36 months- Self-retracting cords)	-
4.11.9.1 (Toys intended to be strung across a cradle,cot ,perambulator or carriage- Warning & instruction)	-
4.11.9.2 (Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage or intended to be suspended over a cot from a wall or ceiling- Warning & instruction)	-
4.11.10 (Cords on toy bags)	-
4.11.11 -5.11.6 (Cords, strings & lines for flying toys- Warning)	-
4.12, 4.12.1(a) (Toy pushchairs,perambulators & similar toys(toys with a handle or other structural member which can fold down over a child)- Number of main locking device & locking device which automatikally engages)	-
4.12, 4.12.1 (Toy pushchairs,perambulators & similar toys(toys with a handle or other structural member which can fold down over a child)-- If the toys comprises two locking devices)	-
4.12, 4.12.1(b) (Toy pushchairs,perambulators & similar toys(Toy pushchairs & perambulators that do not present a hazard of a handle or other structural member folding down over a child)- Number of locking device or safety stop)	-
4.12, 4.12.2(a) (Other toys with folding mechanism(Play furniture & other toys in which a folding mechanism,armor brace)- Other toys with folding mechanisms)	-
4.12 ,4.12.3 (Hinge-line clearance- Gap or clearance along the hinge line between a stationary portion and a movable portion)	-
4.13 ,4.13.1 (Circular holes in rigid materials for children under 60 months- Circular hole clearance)	-
4.13 ,4.13.2 (Accessible clearances for movable segments-)	-
4.13 ,4.13.3 -5.7 (Chains or belts in ride-on toys- Accessibility of a part or component)	-
4.13. ,4.13.4 (Other driving mechanisms)	-
4.13 ,4.13.5 (Winding keys for children under 36 months- Clearance)	-
4.14(a) (Springs - Gap between two consecutive spirals)	-
4.15.1.2-5.12.2 (Sideways stability,feet available for stabilization - Sideways stability test,feet available for stabilization)	-
4.15.1.3-5.12.3 (Sideways stability,feet unavailable for stabilization - Sideways stability test,feet unavailable for stabilization)	-
4.15.1.4-5.12.4 (Fore & aft stability - Fore & aft stability test)	-
4.15.2-5.12.5 (Overload requirements for ride-on toys & seats- Overload test for ride-on toys & seats)	-
4.15.2-5.24.4 (Overload requirements for ride-on toys & seats- Dynamic strength test for wheeled ride -on toys other than toy scooter)	-
4.15.3-5.12.6 (Stability of stationary floor toys- Stability test of stationary floor toys)	-
4.16, 4.16.1 (Enclosures(Ventilation)- volume)	-
4.16, 4.16.1 (Enclosures(Ventilation)- All internal dimensions)	-
4.16, 4.16.1 (Enclosures(Ventilation)- opening /ventilation)	-
4.16, 4.16.1 (Enclosures(Ventilation)- Each opening area)	-
4.16, 4.16.1 (Enclosures(Ventilation)- Two group of opening :each group)	-
4.16.2 , 4.16.2.1-5.13.1 (Closures(Lid, doors & similar devices)- Closures)	-
4.16.2 , 4.16.2.2(a)-5.13.2.2 (Lid support for toy chests & similar toys- Lid support)	-
4.16.2 , 4.16.2.2(a)-5.13.2.3 (Lid support for toy chests & similar toys- Durability test for toy chest-lids)	-
4.16.2 , 4.16.2.2(b)-5.13.2.3 (Lid support for toy chests & similar toys- Durability test for toy chest-lids)	-
4.16.3 (Toys that enclose the head - Ventilation,opening)	-
4.17 -5.14 (Item that cover the face and simulated protective equipment- Impact test for toys that cover the face)	-
4.18.2(a)-5.36 (Projectiles(projectile toy)- Tip assessment of rigid projectiles)	-
4.18.2(b) (Projectiles(projectile toy)- Leading edges)	-
4.18.2(c) (Projectiles(projectile toy)- corner of the projectile)	-
4.18.2(d)- 5.37 (Projectiles(projectile with suction sup)- Length of suction cup projectile)	-
4.18.2(d)-5.24.5 (Projectiles(projectile with suction sup)- Torque test)	-
4.18.2(d)-5.24.6.5 (Projectiles(projectile with suction sup)- Tension test for a projectile with a suction cup)	-
4.18.2(e)-5.24.6.5 (Projectiles(projectile with suction sup)- Tension test for a projectile with a suction cup)	-
4.18.3(a) -5.2 (Projectile toys with stored energy - Small part test)	-
4.18.3(a)-5.15.2 (Projectile toys with stored energy - Wall impact test for projectiles)	-
4.18.3(b)-5.15.1 (Projectile toys with stored energy - Kinetic energy of projectiles)	-
4.18.3(b)-5.15.1 (Projectile toys with stored energy - Contact surface risilient material)	-
4.18.3(b)-5.15.1 (Projectile toys with stored energy - Instructions)	-
4.18.3(b)-5.15.1.3.3 (Projectile toys with stored energy - Determination of kinetic energy per area of contact)	-
4.18.3(c)-5.24.6.4 (Projectile toys with stored energy - Tension test for protective components)	-
4.18.3(d)-5.15.2 (Projectile toys with stored energy - Wall impact test for projectiles)	-
4.18.4.2-5.20 (Projectiles toys without stored energy(Mouth-actuated projectile toys)- Durability of mouth-actuated toys)	-
4.18.4.3(a) (Projectiles toys without stored energy(Projectile in the form of a dart)- Contact area of the dart)	-
4.18.4.3(b) (Projectiles toys without stored energy(Projectile in the form of a dart)- Dart have a protective cap)	-
4.18.4.3(c)- 5.24.6.4 (Projectiles toys without stored energy(Projectile in the form of a dart)- Tension test for protective component)	-
4.18.4.4- 5.15.1.3.3 (Projectiles toys without stored energy(Arrows e.g. bow & arrow set)- Determination of kinetic energy per area of contact)	-
4.18.4.4- 5.15.2 (Projectiles toys without stored energy(Arrows e.g. bow & arrow set)- Wall impact test for projectiles)	-
4.18.4.4(a) (Projectiles toys without stored energy(Arrows e.g. bow & arrow set)- Arrow have a protective cap)	-
4.18.4.4(b) (Projectiles toys without stored energy(Arrows e.g. bow & arrow set)- Arrow have a blunted front end)	-
4.18.4.4(c) (Projectiles toys without stored energy(Arrows e.g. bow & arrow set)- Arrow made of resilient material)	-
4.18.4.4-5.24.6.4 (Projectiles toys without stored energy(Arrows e.g. bow & arrow set)- Tension test for protective components)	-
4.19,4.19.1 -5.36 (Flying toys (General) - Tip assessment of rigid projectiles)	-
4.19.2(a) (Rotor blades on flying toys)	-
4.19.2(b) -5.24.6.6 (Rotor blades on flying toys - Perpendicular tension test for rotor blades)	-
4.19.2(c) (Rotor blades on flying toys)	-
4.19.2(d) (Rotor blades on flying toys)	-
4.19.3(a) (Rotor blades on remote-controlled flying toys)	-
4.19.3(b)-5.24.6.7 (Rotor blades on remote-controlled flying toys - Tension test for rotor blades)	-
4.2 0(a-c) (Aquatic toys)	-
4.2 0(d) (Aquatic toys - Stopper)	-
4.21(a)-5.16.1 (Braking - Determination of freewheeling facility)	-
4.21(a)-5.16.2 (Braking - Braking performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-
4.22.1 (Toys bicycles (General)- Warning)	-
4.22.2 (Toys bicycles - Instruction for use)	-
4.22.3 (Toys bicycles - Determination of maximum saddle height)	-
4.22.4 -5.16.1 (Toys bicycles (Braking requirements)- Determination of freewheeling facility)	-
4.22.4 (Toys bicycles (Braking requirements)- Brake lever dimension ,d)	-
4.22.4 (Toys bicycles (Braking requirements)- lever length)	-
4.22.4 -5.16.3 (Toys bicycles (Braking requirements)- Brake performance for toy bicycles)	-
4.23-5.17 (Speed limitation of electrically driven ride-on toys for children under 3 years- Determination of speed of electrically driven ride-on toys)	-
4.23-5.17 (Speed limitation of electrically driven ride-on toys for children 3 years & over & under 6 years- Determination of speed of electrically driven ride-on toys)	-
4.23-5.17 (Speed limitation of electrically driven ride-on toys for children 6 years & over- Determination of speed of electrically driven ride-on toys)	-
4.24(a) -5.18 (Toys containing a heat source- Ignition)	-
4.24(b) -5.18 (Toys containing a heat source(Part made of metal handle,knob &similar parts)- Determination of temperature increases)	-
4.24(b) -5.18 (Toys containing a heat source(Part made Of glass or porcelain handle,knob &similar parts)- Determination of temperature increases)	-
4.25 -5.19 (Liquid -filled toys - Leakage of liquid-filled toys)	-
4.26(a) -5.2 (Mouth-actuated toys- Small part test)	-
4.27 (Toy roller skates,toy inline skates and toy skatesboards - Warning)	-
4.28 (Percussion caps specifically designed for use in toys- Warning)	-
4.29(h) 5.25 (Acoustic requirements - Warning)	-
4.30 ,4.30.1 (Toys scooters - General)	-
4.30.2 (Toys scooters - Warning & instructions for use)	-
4.30.3 -5.26 (Toys scooters (Strength) - Static strength for toy scooters)	-
4.30.3 -5.27 (Toys scooters (Strength) - Dynamic strength for toy scooters)	-
4.30.3 -5.8 (Toys scooters (Strength) - Sharp-edge test)	-
4.30.3 -5.29 (Toys scooters (Strength) - Strength of toy scooter steering tubes)	-
4.30.4 -5.12.2 (Toys scooters (Stability) - Sideways stability test,feet available for stabilization)	-
4.30.5 (Toys scooters (Adjustable & folding steering tubes and handlebars) -)	-
4.30.6 -5.28 (Toys scooters(Braking) - Brake performance for toy scooters)	-
4.30.7 (Toys scooters - Wheel size)	-
4.30.8 (Toys scooters (Projections) - Handlebars on toy scooters)	-
4.30.8 (Toys scooters (Projections) - Diameter of handlebar)	-
4.31.2 (Magnetic or electrical experimental sets intended for children 8 years & over- Warning)	-
4.31.3(a) -5.32 (All other toys with magnets & magnetic components - Magnetic flux index)	-
4.31.3(a) -5.2 (All other toys with magnets & magnetic components - Small part test)	-
4.31.3(b) -5.34 (All other toys with magnets & magnetic components(wooden toys) - Soaking test for magnets)	-
4.31.3(c) -5.32 (All other toys with magnets & magnetic components Magnetic flux index)	-
4.31.3(c) -5.2 (All other toys with magnets & magnetic components - Small part test)	-
4.32 -5.38.2 (Yo-yo balls - Measurement of initial length,lo)	-
4.32 -5.38.1 (Yo-yo balls - Measurement of elastic constant,k)	-
4.33 -5.11.3 (Staps intended to be worn fully or partially around the neck for children under 36 months - Breakaway feature separation test)	-
4.34 (Sledges and toboggans with cords for pulling - Warning)	-
4.35,4.35.2,4.35.3 -5.39 (Jaw entrapment in handles and steering wheels for children under 18 months - Jaw entrapment test)	-
4.36, 4.36.1 (Assembly (General))	-
4.36.2 (Toys intended to be assembled by a child)	-
4.36.3 (Toys intended to be assembled by an adult)	-
4.36.4 (Toys that are intended to be disassembled between uses)	-
4.37 (Functional toys)	-
4.38 (Toys intended to come into contact with food)	-
4.39 -5.2 (Inflatable toys - Small part test)	-
9873 (Part - 3) Cl 4.1 - Table 1 (Selenium (Se))	-
9873 (Part - 3) Cl 4.1 - Table 1 (Mercury (Hg))	-
9873 (Part - 3) Cl 4.1 - Table 1 (Lead (Pb))	-
9873 (Part - 3) Cl 4.1 - Table 1 (Chromium (Cr))	-
9873 (Part - 3) Cl 4.1 - Table 1 (Cadmium (Cd))	-
9873 (Part - 3) Cl 4.1 - Table 1 (Barium (Ba))	-
9873 (Part - 3) Cl 4.1 - Table 1 (Arsenic (As))	-
9873 (Part - 3) Cl 4.1 - Table 1 (Antimony (Sb))	-
9873 (Part - 9) Cl 3 (Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP))	-
9873 (Part - 9) Cl 3 (Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP))	-

-
Complete Test Facility except Acoustic testing

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

Rs. 16,812/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (General requirement)	-
5 (General conditions for the tests)	-
6 (Classification- IS 302-1)	-
6 (Classification- IS 302-1)	-
7 (Marking and instructions)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.3 (Marking- IS 302-1)	-
7.4 (Marking- IS 302-1)	-
7.5 (Marking- IS 302-1)	-
7.6 (Marking- IS 302-1)	-
7.7 (Marking- IS 302-1)	-
7.8 (Marking- IS 302-1)	-
7.9 (Marking- IS 302-1)	-
7.1O (Marking- IS 302-1)	-
7.11 (Marking- IS 302-1)	-
7.12 (Marking- IS 302-2-15)	-
7.13 (Marking- IS 302-1)	-
7.15 (Marking- IS 302-1)	-
8.1.5 (Live parts of built-in appliances)	-
8.1.4 (Protection against live parts against protective impedance)	-
8.1.3 (Protection against live parts in visible glowing heating elements)	-
8.1.2 (Protection against live parts in openings)	-
8.1.1 (Protection against live parts in all positions)	-
9 (Starting of motor operation test requirements and tests)	-
10.2 (Current input)	-
10.1 (Power input)	-
11 (Heating, IS 302-1, Table -3)	-
11 (Heating, IS 302-1, Table -3)	-
11 (Heating, IS 302-1, Table -3)	-
11 (Heating, IS 302-1, Table -3)	-
11 (Heating, IS 302-1, Table -3)	-
11 (Heating, IS 302-1, Table -3)	-
11 (Heating, IS 302-1)	-
11.1 (General)	-
11.2 (General)	-
11.3 (Heating)	-
11.4 (Heating appliances)	-
11.5 (Motor-operated appliances)	-
11.6 (Combined appliances)	-
11.7 (Duration corresponding)	-
11.8 (Temperature rise)	-
12 (Charging of metal-ion batteries)	-
13.3 (Electric Strength at operating temperature)	-
13.2 (Leakage current at operating temperature)	-
13 (Leakage current and electric strength at operating temperature)	-
14 (Transient Over Voltages)	-
15.1 (Ingress Protection test other than IPX0 (IP test))	-
15.2 (Spillage Test)	-
15.2 (Moisture resistance)	-
15.3 (Humidity Test)	-
15.0 (Moisture resistance)	-
16.0 (General)	-
16.1 (General)	-
16 (Leakage current and electric strength)	-
16.2 (Leakage Current (after Clause 15))	-
16.3 (Electric Strength (after clause 15 and 16.2))	-
17 (Overload protection of transformers and associated circuits)	-
17 (Over Load Protection of Transformers and associated circuits)	-
18 (Endurance)	-
18 (Endurance)	-
19.17 (Abnormal Operation, IS 302-1)	-
19 (Abnormal Operation)	-
19.7 (Abnormal Operation, IS 302-1)	-
19.8 (Abnormal Operation, IS 302-1)	-
19.9 (Abnormal Operation, IS 302-1)	-
19.13 (Abnormal Operation as per Cl 19, IS 302-1)	-
19.13 (Abnormal Operation as per Cl 19, IS 302-1)	-
19.13 (Abnormal Operation as per Cl 19, IS 302-1)	-
19.17 (Abnormal Operation, IS 302-1)	-
20.1 (Stability & Mechanical Hazards, IS 302-1)	-
20.2 (Stability & Mechanical Hazards, IS 302-1)	-
21.1 (Mechanical Strength, IS 302-1)	-
21.2 (Mechanical Strength, IS 302-1)	-
21.3 (Mechanical Strength, IS 302-1)	-
22.2 (Construction, IS 302-1)	-
22.3 (Construction, IS 302-1)	-
22.1 (Construction, IS 302-1)	-
22.5 (Construction)	-
22.6 (Construction, IS 302-1)	-
22.11 (Construction, IS 302-1)	-
22.16 (Construction)	-
22.32 (Construction, IS 302-1)	-
22.42 (Construction)	-
22.7 (Construction, IS 302-1)	-
22.9 (Construction, IS 302-1)	-
22.10 (Construction, IS 302-1)	-
22.12 (Construction, IS 302-1)	-
22.14 (Construction, IS 302-1)	-
22.15 (Construction, IS 302-1)	-
22.18 (Construction, IS 302-1)	-
22.19 (Construction, IS 302-1)	-
22.21 (Construction, IS 302-1)	-
22.22 (Construction, IS 302-1)	-
22.24 (Construction, IS 302-1)	-
22.25 (Construction, IS 302-1)	-
22.28 (Construction, IS 302-1)	-
22.31 (Construction, IS 302-1)	-
22.34 (Construction, IS 302-1)	-
22.35 (Construction, IS 302-1)	-
22.36 (Construction, IS 302-1)	-
22.37 (Construction, IS 302-1)	-
22.38 (Construction, IS 302-1)	-
22.40 (Construction, IS 302-1)	-
22.41 (Construction, IS 302-1)	-
22.43 (Construction, IS 302-1)	-
22.43 (Construction, IS 302-1)	-
22.44 (Construction, IS 302-1)	-
22.49 (Construction, IS 302-1)	-
22.54 (Construction, IS 302-1)	-
22.43 (Construction, IS 302-1)	-
22.44 (Construction, IS 302-1)	-
22.49 (Construction, IS 302-1)	-
22.54 (Construction, IS 302-1)	-
22.55 (Construction, IS 302-1)	-
22.58 (Construction, IS 302-1)	-
22.59 (Construction, IS 302-1)	-
22.60 (Construction, IS 302-1)	-
22.61 (Construction, IS 302-1)	-
Cl-22.16 (Automatic cord (Construction, IS 302-1))	-
23.1 (Internal Wiring, IS 302-1)	-
23.3 (Internal Wiring, IS 302-1)	-
23.2 (Internal Wiring, IS 302-1)	-
23.4 (Internal Wiring, IS 302-1)	-
23.6 (Internal Wiring, IS 302-1)	-
23.7 (Internal Wiring, IS 302-1)	-
23.8 (Internal Wiring, IS 302-1)	-
23.9 (Internal Wiring, IS 302-1)	-
23.10 (Internal Wiring, IS 302-1)	-
24 (Components)	-
25.1 (Supply connection and external flexible cords, IS 302-1)	-
25.2 (Supply connection and external flexible cords, IS 302-1)	-
25.3 (Supply connection and external flexible cords, IS 302-1)	-
25.4 (Supply connection and external flexible cords, IS 302-1)	-
25.5 (Supply connection and external flexible cords, IS 302-1)	-
25.8 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.9 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.10 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.11 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.13 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.17 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.18 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.19 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.20 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.21 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.22 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.23 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.24 (Supply Connection and External Flexible Cords, IS 302-1)	-
26 (Terminals for external conductors)	-
26.5 (Terminals for external conductors)	-
27.1 (Provision for Earthing, IS 302-1)	-
27.5 (Provision for Earthing, IS 302-1)	-
27.2 (Provision for Earthing, IS 302-1)	-
27.3 (Provision for Earthing, IS 302-1)	-
27.4 (Provision for Earthing, IS 302-1)	-
27.6 (Provision for Earthing, IS 302-1)	-
28 (Screw test and connections)	-
26.5 (Terminals for external conductors)	-
29 (clearance, creepage distances and solid insulation)	-
30.1 (Ball pressure test)	-
30.2 (Glow Wire Test)	-
30.2 (Needle Flame Test)	-
31 (Resistance to Rusting)	-
32.1 (Radiation Toxicity and Similar Hazards)	-
32.1 (Radiation, toxicity and similar hazards, is 302-1)	-
A.2 (Earth continuity test)	-
B.22.4 (Construction, IS 302-1)	-
B.22.5 (Construction, IS 302-1)	-

-
-

IS 7142 (2025)

Welded Low Carbon Steel Cylinders for Low Pressure Liquefiable Gases not exceeding 5 Litre Water Capacity - Specification ( Second Revision )

All

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Steel for cylinder)	-
Cl-4.2 (Bung/Valve pad)	-

-
-

IS 797 (2023)

COMMON SALT FOR CHEMICAL INDUSTRIES SPECIFICATION

Please check the remarks View breakup
Grade 1- Rs. 4200.00 Grade 2- Rs. 5200.00 (Except Additional requirements (Cl. 3.3.1.2 a), b) & c) tests)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Description)	-
Cl-4.2 (Moisture Content)	-
Cl-4.3, Table-1 (i) (Sodium chloride (as NaCl), percent by mass, Min)	-
Cl-4.3, Table-1 (ii) (Matter insoluble in water, percent by mass, Max)	-
Cl-4.3, Table-1 (iii) (Calcium salts (as Ca), percent by mass, Max)	-
Cl-4.3, Table-1 (iv) (Magnesium salts (as Mg), percent by mass, Max)	-
Cl-4.3, Table-1 (v) (Sulphates (as SO4 ), percent by mass, Max)	-
Cl-4.3, Table-1 (vi) (Iron compound (as Fe), ppm, Max)	-

-
-

IS 7454 (2024)

Rehabilitation Equipment â Wheelchairs, Folding, Adult Size â Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5 (SHAPE AND DIMENSIONS)	-
Cl-7.1 (Backrest and Seat)	-
Cl-7.2 (Frame)	-
Cl-7.3 (Footrests and Supports)	-
Cl-7.4 (Armrests)	-
Cl-7.5 (Hand Rims)	-
Cl-7.6 (Brakes)	-
Cl-7.7 (Castors)	-
Cl-7.8 (Wheels)	-
Cl-7.9 (Clothing Guards)	-
Cl-7.10 (Folding Mechanism)	-
Cl-7.11 (Lubrication)	-
Cl-8 (Finish)	-
Cl-9.1 (Test for Wheeling)	-
Cl-9.2 (Hazard Running Test)	-
Cl-9.3 (Load Test)	-
Cl-9.4 (Test for Folding)	-
Cl-9.5 (Stability Test)	-
Cl-11 (Marking)	-

-
-

IS 16014 (2024)

MECHANICALLY WOVEN DOUBLE-TWISTED HEXAGONAL WIRE MESH GABIONS REVET MATTRESSES ROCK FALL NETTING AND OTHER PRODUCTS FOR CIVIL ENGINEERING PURPOSES GALVANIZED STEEL WIRE OR GALVANIZED STEEL WIRE WITH POLYMER COATING SPECIFICATION ( Second Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5 (Material and Manufacture)	-
Cl-5.1.1 (Class 1 double-twisted mesh)	-
Cl-5.1.2 (Class 2 double-twisted mesh)	-
Cl-5.4.1 (Galvanized Rings)	-
Cl-5.4.2 (Stainless Steel Fasteners)	-
Cl-6.1 (Tensile Strength)	-
Cl-6.2, Table-7 (i) (Mesh wire dia, mm)	-
Cl-6.2, Table-7 (ii) (Tensile Strength Parallel to twist, kN/m)	-
Cl-5.3 (Lacing wire and stiffeners)	-
Cl-7.1.1 (Mass of Zinc/Zinc Alloy Coating)	-
Cl-7.1.3 (Ageing and Corrosion Resistance)	-
Cl-7.2 (a) (Specific gravity)	-
Cl-7.2 (b) (Tensile strength)	-
Cl-7.2 (c) (Hardness)	-
Cl-7.2 (e) (Salt spray exposure)	-
Cl-7.2 (f) (Modulus of Elasticity)	-
Cl-8.12 (Mesh Opening Tolerances)	-
Cl-9 (Workmanship)	-
Cl-12.1 (Tensile Strength of Wire Mesh Panel)	-
Cl-12.4 (Metallic Coating Mass)	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (i) (Mesh wire dia, mm)	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (ii) (Edge/Selvedge wire dia, mm)	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (iii) (Lacing wire dia, mm)	-

-
-

IS 2556 : Part 3 (2024)

Vitreous China Sanitary Appliances - Specification Part 3 Specific Requirements of Squatting Pans (sixth revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3 (GENERAL REQUIREMENTS)	-
Cl-5 (CONSTRUCTION)	-
Cl-6.1, Table-1 (i) (Length)	-
Cl-6.1, Table-1 (ii) (Length of opening, &fin)	-
Cl-6.1, Table-1 (iii) (Height)	-
Cl-6.1, Table-1 (iv) (Width of opening, small end)	-
Cl-6.1, Table-1 (v) (Width of opening, wide end)	-
Cl-6.1, Table-1 (vi) (Slope of bottom of pan)	-
Cl-6.1, Table-1 (vii) ("Distance between the centre of outlet to the inside face of flushing rim at the back, Mm")	-
Cl-6.1, Table-1 (viii) (Width)	-
Cl-6.1, Table-1 (ix) (Length of footrest)	-
Cl-6.2, (Connecting Dimensions)	-
Cl-7 (FINLSH)	-
Cl-8.3 (Water Holding Capacity Test)	-
Cl-8.4 (Saw Dust Test)	-
Cl-10 (Marking)	-

-
-

IS 11169 : Part 1 (2022)

Specification for steels for cold heading cold extrusion applications: Part 1 wrought carbon and low alloy steels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
17 (Shape, Dimensions and tolerances)	-
8.1 (Tensile Test)	-
8.1 (Hardness Test)	-
Cl.4.3,7.2 & Table-A.2 (Carbon -IS 228 (P-1) or any other Established instrumental/ chemical method)	-
Cl.4.3,7.2 & Table-A.2 (Manganese- IS 228 (P-2) or any other Established instrumental/ chemical method)	-
Cl.4.3,7.2 & Table-A.2 (Phosphorus- IS 228 (P-3) or any other Established instrumental/ chemical method)	-
Cl.4.3,7.2 & Table-A.2 (Sulphur- IS 228 (P-9) or any other Established instrumental/ chemical method)	-
Cl.4.3,7.2 & Table-A.2 (Silicon- IS 228 (P-8) or any other Established instrumental/ chemical method)	-
Cl.4.3,7.2 & Table-A.2 (Nikel- Relevant parts of IS 228 or any other established international instrumental/chemical method)	-
Cl.4.3,7.2 & Table-A.2 (Copper- IS 228 (P-15) or any other Established instrumental/ chemical method)	-
Cl.4.3,7.2 & Table-A.2 (Aluminium- Established instrumental/ chemical method)	-
Cl.4.3,7.2 & Table-A.2 (Chromium- Relevant parts of IS 228 or any other established international instrumental/chemical method)	-
Cl.4.3,7.2 & Table-A.2 (Molybdenum- Relevant parts of IS 228 or any other established international instrumental/chemical method)	-
Cl.4.3,7.2 & Table-A.2 (Nikel- Relevant parts of IS 228 or any other established international instrumental/chemical method)	-
Cl.4.3,7.2 & Table-A.2 (Tin- Relevant parts of IS 228 or any other established international instrumental/chemical method)	-
Cl.4.3,7.2 & Table-A.2 (Vanadium- Relevant parts of IS 228 or any other established international instrumental/chemical method)	-
Cl. 7 (Carbon)	-
Cl. 7 (Sulphur)	-
Cl. 7 (Phosphorous)	-
Cl. 7 (Manganese)	-
Cl. 7 (Silicon)	-
Cl. 7 (Nickel)	-
Cl. 7 (Chromium)	-
Cl. 7 (Aluminium)	-
Cl. 7 (Molybdenum)	-
Cl. 7 (Boron)	-
Cl. 7 (Copper)	-
Cl. 7 (Cr+Ni+Mo)	-
Cl. 7 (Sn)	-
Cl. 7 (V)	-
Cl. 7 (Cr+Ni+Cu+Sn+Mo+V)	-
Cl-14 (SURFACE QUALITY)	-
Cl-17.2.2 (Length)	-
CL 7.2 (Diameter ( average 8))	-

-
-

IS 14490 (2024)

Plain Copier Paper â Specification (Second Revision)

Rs. 4,130/- approx. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.3 (Grammage (Substance))	-
5.4 (Thickness)	-
5.5 (Size)	-
5.6, Table 1, i (ISO brightness, percent, Min)	-
5.6, Table 1, ii (Opacity, percent, Min)	-
5.6, Table 1, iii (One minute cobb test, both sides, g/m2 , Max)	-
5.6, Table 1, iv (Surface strength, Dennison (Wax Pick))	-
5.6, Table 1, v (Smoothness for both sides (Bendsten), ml/min, Max)	-
5.6, Table 1, vi (Ash content (at 900 °C), percent by mass, Max)	-
5.6, Table 1, vii (Taber stiffness, Min: Machine direction, Cross direction)	-
5.6, Table 1, viii (Tear Index, mN.m2 /g, Min: Machine direction, Cross direction)	-
5.6, Table 1, ix (Tensile index, N.m/g, Min: Machine direction, Cross direction)	-
5.1.1 (plain copier paper)	-
5.3 (Grammage (Substance))	-
5.4 (Thickness)	-
5.5 (Size)	-
5.6, Table 1, i (ISO brightness, percent, Min)	-
5.6, Table 1, ii (Opacity, percent, Min)	-
5.6, Table 1, iii (One minute cobb test, both sides, g/m2 , Max)	-
5.6, Table 1, iv (Surface strength, Dennison (Wax Pick))	-
5.6, Table 1, v (Smoothness for both sides (Bendsten), ml/min, Max)	-
5.6, Table 1, vi (Ash content (at 900 °C), percent by mass, Max)	-
5.6, Table 1, vii (Taber stiffness, Min: Machine direction, Cross direction)	-
5.6, Table 1, viii (Tear Index, mN.m2 /g, Min: Machine direction, Cross direction)	-
5.6, Table 1, ix (Tensile index, N.m/g, Min: Machine direction, Cross direction)	-
5.2 (Moisture)	-

-
-

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

All

₹ 16, 700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Timber)	-
Cl-7.1 (Dimensions -length)	-

-
-

IS 9360 (2024)

Carbofuran granules, encapsulated - Specification (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description - IS 9360:2024)	-
3.2.2 (Sieve Test (Upper Declared Limit) - IS 6940:1982)	-
3.2.2 (Sieve Test (Lower Declared Limit) - IS 6940:1982)	-
3.2.2 (Ratio of lower to upper limit of sieve size)	-
3.2.3 (Dust 75 Micron sieve- IS 6940:1982)	-
3.2.5 (Moisture content - IS 6940:1982)	-
3.3.1 (Carbofuran Content - IS 9360:2024)	-
3.3.2 (Acidity (as H2SO4) - IS 6940:1982)	-
3.2.4.1 (Attrition Test - IS 9359:2023)	-
3.2.4.2 (Water run-off test - IS 9359:2023)	-

-
-

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

9462 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3.1 (Material used for manufacturing utensils)	-
Cl 3.2 (Material used for composite bottom)	-
Cl 3.3 (Material used for body of utensil of 3-ply construction)	-
Cl 3.4 (Material used for stainless steel lid)	-
Cl 3.5 (Material used for tempered glass lid)	-
Cl 3.5 (Material used for stainless steel rim)	-
Cl 4.2 & Table 1 (Minimum Sheet Thickness for Body of Utensil)	-
Cl 4.2 & Table 2 (Minimum Sheet Thickness for Lid of Utensil)	-
Cl 4.2 (Thickness of the finished utensil)	-
Cl 4.3 (Classification)	-
Cl 4.4 (i) (Thickness of Aluminium disc/core)	-
Cl 4.4 (ii) (Thickness of Protector/cowl)	-
Cl 4.5 (Minimum sheet thickness (3-ply utensil))	-
Cl 4.5 (Thickness of finished utensil (3-ply utensil))	-
Cl 5.1 (Manufacturing defect & visual appearance)	-
CL 5.2 (Accessibility for cleaning)	-
Cl 5.3 (Joining of handles to the utensils)	-
Cl 5.4 (Requirement for handles)	-
Cl 5.5 (Welding (Finish))	-
Cl 5.6 (Finish of 3-ply utensil)	-
Cl 5.7 (Requirement for coating)	-
Cl 5.8 (Coating thickness test)	-
Cl 5.8 (Coating adhesion test)	-
Cl 5.8.1 (Thermal shock test (Coating))	-
Cl 6.1 (Staining Test (Type Test - Frequency Once in a Year))	-
Cl 6.2 (Mechanical Shock Test (for Cladded Utensils Only))	-
Cl 6.3 (Thermal Shock Test (for Cladded Utensils Only))	-
Cl 6.4 (Dry Heat Test (for Cladded Utensils Only))	-
Cl 6.5 (Coating Thickness Test (for Copper Deposit))	-
Cl 6.6 (Thermal shock test (3-ply construction utensil body))	-
Cl 6.7 (Nominal Capacity Test)	-
Cl 8 (Marking)	-

-
-

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Material)	-
Cl-4.2 (Carbon content of finished PE lateral pipe)	-
Cl-5.1 (Dimensions of pipes and wall thicknesses)	-
Cl-6.0 (Visual Appearance)	-
Cl-7.2 (Reversion Test)	-
Cl-7.3 (Tensile Test)	-
Cl-7.3.1 (Test Piece)	-
Cl-7.4 (Susceptibility to Environmental Stress Cracking)	-
Cl-8.0 (Supply of pipes)	-
Cl-11 (Marking)	-
3 (Class of Pipe)	-
5.1 & Table 1 (Dimensions of Pipes - Outside diameters)	-
5.1 & Table 1 (Dimensions of Pipes - Wall thickness)	-
6 (Visual Appearance)	-
7.2 (Reversion Test)	-
7.3 (Tensile Strength)	-
7.3 (Elongation at Break)	-
4.2(a) (Carbon Black Content-IS 2530)	-
4.2(b) (Carbon Black Dispersion-IS 2530)	-
4.2(a) (Carbon Black Content-IS 2530)	-
4.2(b) (Carbon Black Dispersion-IS 2530)	-

-
-

IS 164 (2023)

Ready mixed paint for road marking-Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2 (Application ( IS 164 : 2023))	-
5.3 (Durability ( IS 164 : 2023))	-
5.4 (Lead Restriction (lead or compounds of lead or mixtures of both) ( IS 101 : Part 8 : Sec 5 : 2022))	-
5.6.2.1 / 5.5 Table 1 (xx) ("toxic metals such as cadmium, chromium (VI) and their compounds (AAS / ICP) ")	-
5.6.2.2 ( For ECO-Mark) (volatile organic compounds ( IS 101 : Part 2 : Sec 4 : 2022))	-
5.5 Table 1 (i) (Drying time a) Surface dry ( IS 101 : Part 3 : Sec 1 : 1986 ))	-
5.5 Table 1 (i) (Drying timeb) Hard dry ( IS 101 : Part 3 : Sec 1 : 1986 ))	-
5.5 Table 1 (ii) (Consistency ( IS 164 : 2023))	-
5.5 Table 1 (iii) (Finish ( IS 10106 : Part 3 : Sec 4 : 1988))	-
5.5 Table 1 (iv) (Colour (IS 101 : Part 4 : Sec 2 : 2021))	-
5.5 Table 1 (v) (Wet opacity ( IS 101 : Part 4 : Sec 1 : 1988))	-
5.5 Table 1 (vi) (Recoating property ( IS 164 : 2023))	-
5.5 Table 1 (vii) (Resistance to bleeding ( IS 164 : 2023))	-
5.5 Table 1 (viii) (Viscosity (IS 101 : Part 1 : Sec 5 : 1989))	-
5.5 Table 1 (ix) (Viscosity in KU after accelerated stability (IS 101 : Part 1 : Sec 5 : 1989))	-
5.5 Table 1 (xi) (Mass in kg/10 L ( IS 101 : Part 1 : Sec 7 : 2020))	-
5.5 Table 1 (xii) (Keeping properties ( IS 101 : Part 6 : Sec 2 : 1989 ))	-
5.5 Table 1 (xiii) (Early wash out resistance ( IS 164 : 2023))	-
5.5 Table 1 (xiv) (No pick up time ( IS 164 : 2023))	-
5.5 Table 1 (xv) (Non Volatile matter (IS 101 : Part 8 : Sec 2 : 1990))	-
5.5 Table 1 (xv) (Volume solid ( IS 101 : Part 8 : Sec 6 : 1993 ))	-
5.5 Table 1 (xvi) ("Taber Abrasion resistance ( IS 164 : 2023)")	-
5.5 Table 1 (xvii) (Scrub resistance( IS 164 : 2023))	-
5.5 Table 1 (xviii) ("Resistance to accelerated weathering ( IS 164 : 2023)")	-
5.5 Table 1 (xix) (Flexibility ( IS 101 : Part 5 : Sec 2 : 1988))	-
5.5 Table 1 (xxi) (Resistance to wear ( IS 164 : 2023))	-
Cl-5.1 (Composition)	-

-
-

IS 9295 (2024)

STEEL TUBES FOR IDLERS FOR BELT CONVEYORS - SPECIFICATION (second revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
As per Clause 5 (Types /Grade and Designation)	-
As per clause 6 (Material)	-
As per clause 7 (Manufacture)	-
As per clause 7.1.5 (Sulphur)	-
As per clause 7.1.6 (Phosphorus)	-
As per clause 8 (Mechanical Properties)	-
As per clause 8.1 (Tensile Test)	-
As per clause 8.1.1 (Yield Stress)	-
As per clause 8.1.2 (Elongation)	-
As per clause 8.3 (Flattening Test)	-
Cl-9.1, Table-2 (Outside Diameter)	-
As per clause 10 (Hardness Test)	-
As per clause 11 (Mechanical Test)	-
As per clause 13 (Dimension Tolerance)	-
As per clause 14 (Workmanship)	-
As per clause 15 (Straightness)	-
As per clause 16 (Length)	-
As per clause 17 (Surface Protection)	-
As per clause 18 (Marking)	-
Cl-9.1, Table-2 (Thickness)	-
Cl-9.1, Table-2 (Mass)	-
Cl- 13.1.5.1 ("1.Outer dia (08) ")	-
Cl-13.1.5.4 (Thickness (08))	-
Cl-13.1.1 (Ovality (08))	-
Cl- "13.1.5.1, 13.1.5.4 & 13.1.1 " (Avarage Outer dia (08))	-
Cl- "13.1.5.1, 13.1.5.4 & 13.1.1 " (Avarage Thickness (08))	-
Cl- "13.1.5.1, 13.1.5.4 & 13.1.1 " (Maximum Ovality (08))	-

-
-

IS 6406 (2024)

Brilliant blue FCF, food grade - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 and 7 Table 1 (i) (Total dye content - IS 6406:2024)	-
3.2 and 7 Table 1 (iv) (Combined ether extracts- IS 1699:1995)	-
3.2 and 7 Table 1 (iii) (Water Insoluble Matter- IS 1699:1995)	-
3.2 and 7 Table 1 (viii) (Lead - IS 1699:1995)	-
3.2 and 7 Table 1 (ix) (Arsenic- IS 1699:1995)	-
3.2 and 7 Table 1 (viii) (Lead - IS 1699:1995)	-
3.2 and 7 Table 1 (ix) (Arsenic- IS 1699:1995)	-

-
-

IS 15298 : part 4 (2024)

Personal Protective Equipment Part 4 Occupational Footwear (ISO 20347 : 2021, MOD) (Third Revision)

20400 View breakup
Chemical Requirement, Cl.5.3.5, Lead Content, Cl.5.3.7

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.3.5, Table no 1 of IS 17011,(i) (Allergenic and carcinogenic disperse dyes)	-
Cl 5.3.5, Table no 1 of IS 17011 (ii) (Aromatic amines released from Azo dyes (each individual amine))	-
Cl 5.3.5, Table no 1 of IS 17011 (iv) (Chromium (VI))	-
Cl 5.3.5, Table no 1 of IS 17011 (v) (Dimethyl fumarate (DMFU))	-
Cl 5.3.5, Table no1 of IS 17011 (vi) (Formaldehyde (free or released by partial hydrolysis))	-
Cl 5.3.5, Table no 1 of IS 17011 (viii) (Organotin compounds)	-
Cl 5.3.5, Table no 1 of IS 17011 (ix) (PCP-TeCP-TriCP polychlorophenols)	-
Cl 5.3.5, Table no 1 of IS 17011 (x) (pH)	-
Cl 5.3.5, Table no 1 of IS 17011 (xi) (Phthalates (each individual phthalate))	-
Cl 5.3.5, Table no 1 of IS 17011 (xii) (Nickel, on skin contact)	-
Cl 5.3.7 (Lead Content ( National Annex A))	-

-
Complete for Chemical ( The material composition of each shoe part must be clearly declared for testing)

IS 15298 : Part 3 (2024)

Personal Protective Equipment Part 3 Protective Footwear (ISO 20346 : 2021, MOD) (Third Revision)

20400/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.3.6, Table no 1 of IS 17011 (i) (Allergenic and carcinogenic disperse dyes)	-
Cl 5.3.6, Table no 1 of IS 17011 (ii) (Aromatic amines released from Azo dyes (each individual amine))	-
Cl 5.3.6, Table no 1 of IS 17011 (iv) (Chromium (VI))	-
Cl 5.3.6, Table no 1 of IS 17011 (v) (Dimethyl fumarate (DMFU))	-
Cl 5.3.6, Table no1 of IS 17011 (vi) (Formaldehyde (free or released by partial hydrolysis))	-
Cl 5.3.6, Table no 1 of IS 17011 (viii) (Organotin compounds)	-
Cl 5.3.6, Table no 1 of IS 17011 (ix) (PCP-TeCP-TriCP polychlorophenols)	-
Cl 5.3.6, Table no 1 of IS 17011 (x) (pH)	-
Cl 5.3.6, Table no 1 of IS 17011 (xi) (Phthalates (each individual phthalate))	-
Cl 5.3.6, Table no 1 of IS 17011 (xii) (Nickel, on skin contact)	-
Cl 5.3.8 (Lead Content ( National Annex A))	-
Cl 5.2 (Design)	-
Cl 5.2.2 (" Height of upper ")	-
Cl 5.3.1.1 (Construction of whole footwear)	-
Cl 5.2.3 (Heel area)	-
Cl 5.3.1.2 (Upper/outsole bond strength)	-
Cl 5.3.2.1 (Toe protection - general)	-
Cl 5.3.2.2 (Internal length)	-
Cl 5.3.2.3 (Width of toecap flange)	-
Cl 5.3.2.4.1 (Corrosion resistance of Class I footwear and hybrid mounted footwear)	-
Cl 5.3.2.4.2 (Corrosion resistance of Class II and hybrid moulded footwear)	-
Cl 5.3.2.6 (Impact resistance)	-
Cl 5.3.2.7 (Compression resistance)	-
Cl 5.3.3 (Leak proofness)	-
Cl 5.3.4 ("Specific ergonomic features ")	-
Cl 5.4.1.1 (Class I footwear, determination of the area where upper requirements apply of Upper)	-
Cl 5.4.1.2 (Hybrid footwear, determination of the area where upper requirements apply of Upper)	-
Cl 5.4.2 (Thickness)	-
Cl 5.4.3 (Tear strength)	-
Cl 5.4.4, Table 11 (Tensile properties- Tensile strength)	-
Cl 5.4.4, Table 11 (Tensile properties- Breaking Force)	-
Cl 5.4.4, Table 11 (Tensile properties-Modulus at 100 % elongation)	-
Cl 5.4.4, Table 11 (Tensile properties- Elongation at break)	-
Cl 5.4.6 (Water vapour permeability and coefficient)	-
Cl 5.6.2 (Tear strength of tongue)	-
Cl 5.4.7 (Resistance to hydrolysis)	-
Cl 5.5.2 (Lining- Tear strength)	-
Cl 5.5.3 (Lining- Abrasion resistance)	-
Cl 5.5.4 (Lining-Water vapour permeability and coefficient)	-
Cl 5.7.1 (Thickness of Insole, insock and footbed)	-
Cl 5.7.2 (Water permeability of insock)	-
Cl 5.7.3 (Water absorption and desorption of Insole, insock and footbed)	-
Cl 5.7.4.1 (Abrasion resistance of Insoles)	-
Cl 5.8.2.1 (Thickness of Outsole)	-
Cl 5.8.2.2 (Cleated area)	-
Cl 5.8.2.3 (Cleat height)	-
Cl 5.8.3 (Outsole- Tear strength)	-
Cl 5.8.4 (Outsole- Abrasion resistance)	-
Cl 5.8.5 (Outsole-Flexing resistance)	-
Cl 5.8.6 (Outsole-Resistance to hydrolysis)	-
Cl 5.8.7 (Interlayer bond strength)	-

-
Complete for Chemical ( The material composition of each shoe part must be clearly declared for testing)

IS 15844 : Part 3 (2024)

Sports Footwear Part 3 Professional Sports Footwear

20400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-7.12.1, Table no. 1 of IS 17011,(i) (Allergenic and carcinogenic disperse dyes)	-
Cl-7.12.1, Table no. 1 of IS 17011,(ii) (Aromatic amines released from Azo dyes (each individual amine))	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv) (Chromium (VI))	-
Cl-7.12.1, Table no. 1 of IS 17011,(v) (Dimethyl fumarate (DMFU))	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi) (Formaldehyde (free or released by partial hydrolysis))	-
Cl-7.12.1, Table no. 1 of IS 17011,(v) (Dimethyl fumarate (DMFU))	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi) (Formaldehyde (free or released by partial hydrolysis))	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii) (Organotin compounds)	-
Cl-7.12.1, Table no. 1 of IS 17011,(ix) (PCP-TeCP-TriCP polychlorophenols)	-
Cl-7.12.1, Table no. 1 of IS 17011,(xi) (Phthalates (each individual phthalate))	-
Cl-7.12.1, Table no. 1 of IS 17011,(x) (pH)	-
C-7.12.1, Table no. 1 of IS 17011,(xii) (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-

-
Complete for Chemical ( The material composition of each shoe part must be clearly declared for testing)

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- sample@bis.gov.in

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found