BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- sample@bis.gov.in

Scope List

Reset

861 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 14544 (2022)

LEATHER SAFETY AND PROTECTIVE FOOTWEAR WITH DIRECT MOULDED POLYVINYL CHLORIDE PVC SOLE - SPECIFICATION First Revision

20000 View breakup
For Chemical Requirement, Cl.7.1

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
cL-7.1, Table no 1 of IS 17011 (ii) (Aromatic amines released from Azo dyes (each individual amine))	-
Cl-7.1 Table no 1 of IS 17011 (iii) (Aromatic amines released from Azo dyes (each individual amine))	-
Cl-7.1, Table no 1 of IS 17011 (iv) (Chromium (VI))	-
Cl-7.1, Table no 1 of IS 17011 (v) (Dimethyl fumarate (DMFU))	-
Cl-7.1, Table no 1 of IS 17011 (vi) (Formaldehyde (free or released by partial hydrolysis))	-
Cl-7.1, Table no 1 of IS 17011 (viii) (Organotin compounds)	-
Cl-7.1, Table no 1 of IS 17011 (ix) (PCP-TeCP-TriCP polychlorophenols)	-
Cl-7.1, Table no 1 of IS 17011 (x) (pH)	-
Cl-7.1, Table no 1 of IS 17011 (xi) (Phthalates (each individual phthalate))	-
Cl-7.1, Table no 1 of IS 17011 (xii) (Nickel, on skin contact)	-
Cl-7.2 (PVC outsole)	-

-
Complete for Chemical ( The material composition of each shoe part must be clearly declared for testing)

IS 4246 (2025)

DOMESTIC GAS STOVE AND BUILT IN HOB FOR USE WITH LPG SPECIFICATION (Sixth Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (General - IS 4246 : 2025)	-
4.1.1 (General - IS 4246 : 2025)	-
5 (Materials - Cl. 5 of IS 5116)	-
5.1.1 (Materials - Toughened glass, if provided,)	-
5.1 (Materials - IS 5116)	-
6.1 (Design for Maintainance)	-
6.2 (Design for Maintainance)	-
6.3 (Design for Maintainance)	-
6.4 (Design for Maintainance)	-
6.5 (Design for Maintainance)	-
6.6 (Design for Maintainance)	-
7.0 (Rigidity and Stability)	-
8.1 (Workmanship and Finish - Cl. 7 of IS 5116)	-
8.2 (Workmanship and Finish -)	-
8.3 (Workmanship and Finish -)	-
9 (Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-
10 (Injector Jets)	-
11.1 (Burners- Cl. 10 of IS 5116)	-
11.2 (Burners)	-
11.3 (Burners)	-
11.4 (Burners)	-
12.1 (Burner Pan Support)	-
12.2 (Burner Pan Support)	-
12.3 (Burner Pan Support)	-
13.1 (Gas Soundness Test - Cl. 16 of IS 5116)	-
13,2 (Gas Soundness Test)	-
13.2 (Gas Leak Detector)	-
14.1 (Gas Inlet Connection - Cl. 18 of IS 5116)	-
14.3 (Gas Inlet Connection)	-

-
-

IS 14166 (2024)

Respiratory protective devices full - Face masks - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Nominal Values and Tolerances)	-
Cl-5.2 (Materials)	-
Cl-5.3 (Cleaning and Disinfecting)	-
Cl-5.4 (Finish of Parts)	-
Cl-5.5.1 (Mechanical damage)	-
Cl-5.5.2 (Speech diaphragm)	-
Cl-5.5.3 (Tensile force)	-
Cl-5.5.4 (Thermal radiation test)	-
Cl-5.6 (Replaceable Components)	-
Cl-5.7 (Practical Performance)	-
Cl-5.8 (Resistance to Temperature)	-
Cl-5.9.1 (Leakage)	-
Cl-5.9.2 (Compatibility with Skin)	-
Cl-5.10 (Flammability)	-
Cl-5.11 (Resistance to Thermal Radiation)	-
Cl-5.12 (Inward Leakage of Facepiece)	-
Cl-5.13 (Carbon Dioxide Content of the Inhalation Air)	-
Cl-5.14 (Head Harness)	-
Cl-5.14.3.1 (The head harness shall withstand a pull of 100 N)	-
Cl-5.14.3.2 (The head harness shall withstand a pull of 150 N)	-
Cl-5.14.3.3 (Pull of 50 N)	-
Cl-5.15 (Facepiece Connector)	-
Cl-5.15.3 (Strength of Connectors)	-
Cl-5.16.1 (Eyepieces/visors and anti-mist discs)	-
Cl-5.16.3 (Field of vision)	-
Cl-5.16.5 (Impact resistance)	-
Cl-5.17 (Inhalation and Exhalation Valves)	-
Cl-5.17.1 (Inhalation Valves)	-
Cl-5.17.2 (Exhalation Valves)	-
Cl-5.17.3 (Tensile Force)	-
Cl-5.18.1, Table-1 (Inhalation Resistance, mbar)	-
Cl-5.18.1, Table-1 (Exhalation Resistance, mbar)	-
Cl-5.18.2, Table-2 (Inhalation Resistance, mbar)	-
Cl-5.18.2, Table-2 (Exhalation Resistance, mbar)	-
Cl-6 (Test Methods)	-
Cl-7 (Marking)	-

-
-

IS 11569 (2023)

Specification for Cervical Collar (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3.1 (Material)	-
Cl-3.2 (Sewing Thread)	-
Cl-3.3 (Eyelets)	-
Cl-3.3 (Granules polypropylene)	-
Cl-3.4 (Filling Material)	-
Cl-3.5 (Fasteners, Hook and Loop Tape)	-
Cl-3.6 (Reinforcement Material)	-
Cl-4.1 (Dimensions)	-
Cl-4.2 (Tolerance)	-
Cl-5 (Workmanship and finish)	-
Cl-7 (Marking)	-

-
-

IS 8749 (2024)

Biogas Stove â Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Fittings and materials)	-
Cl-5.1.1 (Plastic components)	-
Cl-5.2 (stove or parts)	-
Cl-5.3 (Mercurous nitrate test)	-
Cl-5.4 (Body of the burner)	-
Cl-5.5 (i) (Body)	-
Cl-5.5 (ii) (Plug, nuts, and screws)	-
Cl-5.5 (iii) (Pins)	-
Cl-5.5 (iv) (Springs)	-
Cl-5.5 (v) (Washers)	-

-
Exclusion "-; 8.11 Gas taps, (Cl.17) -GAS CONSUMPTION,(Cl.18)-IGNITION AND FLAME TRAVEL, (Cl.19) - FLAME STABILITY , (Cl.20) - NOISE CONTROL, (Cl.21) - FORMATION OF SOOT, (Cl.22) - FLASH BACK , (Cl.23) - COMBUSTION, (Cl.24) a) - SURFACE TEMPERATURE,(Cl.25) -THERMAL EFFICIENCY,"

IS 3623 (2024)

GUIDE AND RUBBING ROPES â SPECIFICATION (Second Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Size)	-
Cl-4.2 (Length)	-
Cl-5.1 (Material)	-
Cl-5.2 (Tensile strength)	-
Cl-5.3 (Rod or wire)	-
Cl-6 (Breaking load and mass)	-
Cl-7 (Construction)	-
Cl-8.1 (Workmanship)	-
Cl-8.2 (Joints)	-
Cl-8.3 (Lubrication)	-
Cl-9.1 (Round Wire/Rod Ropes)	-
Guide and Rubbing Ropes —Specification (Locked Coil Ropes)	-
Cl-5.1 (Material)	-
Cl-9.2.2 (Reverse Bend Test)	-
Cl-10.1 (completed wire ropes and wires)	-
Cl-10.2 (Test on Wires from the Completed Rope)	-
Cl-10.3 (Breaking Load Test)	-
Cl-13 (Marking)	-

-
-

IS 3745 (2024)

Yoke Type Medical Cylinder Valve with Pin Index Connection ( Third Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3.1 (Chemical Composition- Metallic and non-metallic materials)	-
Cl-3.2.1 (Tensile Strength and Elongation)	-
Cl-3.2.2 (Izod Impact Strength)	-
Cl-3.4 (Protective Finishes)	-
Cl-4 (Design)	-
Cl-4.1 (Design Criteria-Valve)	-
Cl-5.1 (Design Criteria of Pressure Relief Devices)	-
Cl-5.2 (Relief/Bursting Pressure)	-
Cl-6.1 (Cylinder Valve)	-
Cl-6.2 (Yoke)	-
Cl-9.1 (Dimensions - Outlet Connection for Oxygen)	-
Cl-9.2 (Dimensions - Outlet Connection for Oxygen/Carbon Dioxide Mixtures (Carbon Dioxides ≤ 7 percent)	-
Cl-9.3 (Dimensions - Outlet Connection for Oxygen/Helium Mixtures (Helium ≤ 80 percent)	-
Cl-9.4 (Dimensions - Outlet Connection for Ethylene)	-
Cl-9.5 (Dimensions - Outlet Connection for Nitrous Oxide)	-
Cl-9.6 (Dimensions - Outlet Connection for Cyclo-Propane)	-
Cl-9.7 (Dimensions - Outlet Connection for Helium/Oxygen Mixtures (Oxygen ≤ 20 percent)	-
Cl-9.8 (Dimensions - Outlet Connection for Carbon Dioxide/Oxygen Mixtures (Carbon Dioxide ≥ 7 percent)	-
Cl-9.9 (Dimensions - Outlet Connection for Medical Air)	-
Cl-9.10 (Dimensions - Outlet Connection for Special Mixtures of 50 percent Nitrous Oxide and 50 percent Oxygen)	-
Cl-9.11 (Dimensions - Outlet Connection for Nitrogen)	-
Cl-10 (INLET THREADS)	-
Cl-11 (HYDRAULIC BURST PRESSURE TEST)	-
Cl-12 (INTERNAL AND EXTERNAL TIGHTNESS TEST)	-
Cl-13 (VALVING TORQUE TEST)	-
Cl-14 (ENDURANCE TEST)	-
Cl-15 (MARKING)	-
Cl-7 (Basic dimensions for yoke type valve connections)	-
Cl-8 (Alternative Designs of Yoke Type Valve Connections)	-

-
-

IS 9471 : Part 7 (2024)

Modular Lower Limb Orthotic Components â Specification Part 7 Orthotic Joint Bars, Ankle and Knee (Upper and Lower) (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4 (SHAPE AND DIMENSIONS)	-
Cl-5 (MATERIAL)	-
Cl-6 (WORKMANSHIP AND FINISH)	-
Cl-7 (BEND TEST)	-
Cl-8 (MARKING)	-

-
-

IS 9471 : Part 6 (2024)

Modular Lower Limb Orthotic Components â Specification Part 6 Orthotic Hip Joint (Joint Unit, Hip Drop Lock) (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Joint Body Upper)	-
Cl-4.2 (Joint Hip Lower)	-
Cl-4.3 (Lock Drop Ring)	-
Cl-4.4 (Screw)	-
Cl-4.5 (Nut)	-
Cl-5 (WORKMANSHIP AND FINISH)	-
Cl-6 (FUNCTIONAL REQUIREMENTS)	-
Cl-7 (BEND TEST)	-
Cl-8 (MARKING)	-

-
-

IS 9471 : Part 4 (2024)

Modular Lower Limb Orthotic Components â Specification Part 4 Joint Unit, Ankle (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4 (SHAPE AND DIMENSIONS)	-
Cl-4.4 (Depth of Slot)	-
Cl-5.1 (strength heat)	-
Cl-5.2 (screws)	-
Cl-5.3 (steel annealed bars)	-
Cl-5.4 (steel)	-
Cl-5.5 (spring)	-
Cl-6 (WORKMANSHIP AND FINISH)	-
Cl-7 (HEAT TREATMENT)	-
Cl-8 (Marking)	-

-
-

IS 9471 : Part 3 (2024)

Modular Lower Limb Orthotic Components â Specification Part 3 Stirrup Plates (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3 (SHAPE AND DIMENSIONS)	-
Cl-4.1 (Plate)	-
Cl-4.2 (Channel)	-
Cl-5 (FABRICATION)	-
Cl-6 (WORKMANSHIP AND FINISH)	-
Cl-7 (MARKING)	-

-
-

IS 64 (2023)

Barium sulphate pigments for paints - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Form and Condition)	-
Cl-5.2 (Lead Restriction)	-
Cl-5.4, Table 1 (i) (a) (Barium (as BaSO4), percent by mass, Min)	-
Cl-5.4, Table 1 (i) (b) (Carbonates (as BaCO3), percent by mass, Max)	-
Cl-5.4, Table 1 (ii) (Volatile matter, percent by mass, Max)	-
Cl-5.4, Table 1 (iii) (Residue on sieve, percent by mass, Max)	-
Cl-5.4, Table 1 (iv) (Oil absorption)	-
Cl-5.4, Table 1 (v) (Colour)	-
Cl-5.4, Table 1 (vi) (Matter soluble in water, percent by mass, Max)	-
Cl-5.4, Table 1 (vii) (pH of the aqueous extract)	-
Cl-5.4, Table 1 (viii) (Relative density at 25/25 °C,)	-

-
All except Toxic Heavy Metal Restriction

IS 4581 (2021)

PHOSPHORUS TRICHLORIDE PURE AND ANALYTICAL REAGENT-SPECIFICATION Second Revision IS 4581

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Description)	-
4.2 , Table No. 1 , i) (Phosphorus trichloride, (as PCl3 ))	-
4.2 , Table No. 1 , iii) (Relative density)	-
4.2 , Table No. 1 , iv) (Evaporation residue, including PCl5)	-
4.2 , Table No. 1 , v) (Sulphate (as SO4 ))	-
4.2 , Table No. 1 , vi) (Heavy metals (as Pb))	-
4.2 , Table No. 1 , vii) (Iron (as Fe),)	-
4.2 , Table No. 1 , viii) (Arsenic,)	-

-
Test facility for Boiling Range not available

IS 6046 (2023)

Gypsum for agricultural use - Specification (second revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3.1 (Fineness - Cl. 3 of IS 1288)	-
Cl-3.2 Table 1 (Calcium Sulphate Dihydrate - Annex B of IS 6046)	-
Cl-3.2 Table 1 (Sodium Content( as Na) - Annex C of IS 6046)	-

-
-

IS 2923 (2024)

Carmoisine, food grade - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 and 7 Table 1 (i) (Total dye content - IS 2923:2024)	-
3.2 and 7 Table 1 (ii) (Loss on drying at 135° C and Chlorides and sulphates - IS 1699: 1995)	-
3.2 and 7 Table 1 (iii) (Water Insoluble Matter- IS 1699:1995)	-
3.2 and 7 Table 1 (iv) (Combined ether extracts- IS 1699:1995)	-
3.2 and 7 Table 1 (v) (Subsidiary dyes- IS 2923:2024)	-
3.2 and 7 Table 1 (vi) (Dye Intermediates- IS 2923:2024)	-
3.2 and 7 Table 1 (vii) (Unsulphonated primary aromatic amines- IS 2923:2024)	-
3.2 and 7 Table 1 (viii) (Lead - IS 1699)	-
3.2 and 7 Table 1 (ix) (Arsenic - IS 1699)	-
3.2 and 7 Table 1 (x) (Mercury - IS 1699)	-
3.2 and 7 Table 1 (xi) (Copper - IS 1699)	-
3.2 and 7 Table 1 (xii) (Chromium - IS 1699)	-
3.2 and 7 Table 1 (xiii) (Cadmium - IS 1699)	-

-
-

IS 5405 (2025)

Disposable Sanitary Napkin/Panty Liner/Maternity Pad/Period Panty - Specification ( Third Revision )

Rs 12955/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.3.1 (Bacterial and Fungal Bioburden)	-
7.3.2 (Staphylococcus aureus)	-
5 (Sizes)	-
Cl. 5 Table-1 (Length (Absorbent core only))	-
Cl 7.5 (Phthalate test- Combination)	-
7.1 (pH Test)	-
Cl 7.5 (Phthalate test- Di-iso-butyl phthalate (DIBP))	-
7.2 ("Ability to Withstand Pressure after Absorption: Liquid Absorption ml, Min")	-

-
-

IS 15354 : Part 1 (2023)

Single-use medical examination gloves Part 1 Specification for gloves made from rubber latex or rubber solution Second Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.3 (Finish)	-
Cl-5 (Materials)	-
Cl-7.1, Table-2 (Size code)	-
Cl-7.1, Table-2 (Width corresponding to size code (dimension w, Figure 1))	-
Cl-7.1, Table-2 (Descriptive size)	-
Cl-7.1, Table-2 (Width corresponding to descriptive size (dimension w, Figure 1))	-
Cl-7.1, Table-2 (Minimum length (dimension l, Figure 1))	-
Cl-7.1, Table-2 (Minimum thickness (at locations shown in Figure 1))	-
Cl-7.1, Table-2 (Maximum thickness (at approximate centre of palm))	-
Cl-7.2 (Water tightness)	-
Cl-7.3.2 & 7.3.3, Table-3 (Minimum force at break before accelerated ageing, N)	-
Cl-7.3.2 & 7.3.3, Table-3 (Minimum elongation at break before accelerated ageing, %)	-
Cl-7.3.2 & 7.3.3, Table-3 (Minimum force at break after accelerated ageing, N)	-
Cl-7.3.2 & 7.3.3, Table-3 (Minimum elongation at break after accelerated ageing, %)	-
Cl-7.4 (Sterility)	-
Cl-9 (Marking)	-

-
Partial

IS 5290 (2025)

Landing Valves - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5 (MATERIAL OF CONSTRUCTION)	-

-
-

IS 903 (2025)

Fire Hose Delivery Couplings, Branch Pipe, Nozzles and Nozzle Spanner - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 4 (WORKMANSHIP AND FINISH)	-
Cl. 5 ("INSTANTANEOUS DELIVERY HOSE COUPLINGS")	-
Cl. 6 (BRANCH PIPE)	-
Cl. 7 (NOZZLES)	-
Cl. 5.3 (Materials)	-
Cl. 5.4 (Testing)	-
Cl. 6.3 (Materials)	-
Cl. 6.4 (Testing)	-
Cl. 7.3 (Materials)	-
Cl. 7.4 (Testing)	-
Cl-10.1 (NOZZLE SPANNER - Material)	-
Cl-10.3 (NOZZLE SPANNER - Anti-corrosive treatment)	-
Cl. 10 (NOZZLE SPANNER)	-

-
-

IS 12492 (2025)

Thermoplastics Hoses (Textile Reinforced) for Compressed Air â Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-6 (Materials and construction)	-
Cl-7.1, Table-1 (Inside diameter)	-
Cl-7.1, Table-1 (Tolerance)	-
Cl-7.1, Table-1 (Minimum wall thickness- Type A)	-
Cl-7.1, Table-1 (Minimum wall thickness- Type B)	-
Cl-7.1, Table-1 (Minimum wall thickness- Type C)	-
Cl-7.1, Table-1 (Minimum wall thickness- Type D)	-
Cl-7.2 (Concentricity)	-
Cl-7.3 (Tolerances on length)	-
Cl-8.1.1 (Tensile strength and elongation at break of lining and cover)	-
Cl-8.1.2 (Resistance to ageing)	-
Cl-8.1.3 (Loss in mass on heating)	-
Cl-8.2.1 (Hydrostatic requirements)	-

-
Excluding Resistance to Liquids, Performance Test- Cold bend radius

IS 573 (2023)

TRISODIUM PHOSPHATE SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.2, Table-1 (i) (Matter insoluble in water, percent by mass, Max)	-
Cl-5.2, Table-1 (ii) (Phosphates (P2O5), percent by mass, Min)	-
Cl-5.2, Table-1 (iii) (Carbonates (Na2CO3), percent by mass, Max)	-
Cl-5.2, Table-1 (iv) (Carbonate alkalinity (NaOH), percent by mass, Max)	-
Cl-5.2, Table-1 (v) (Free sodium hydroxide (NaOH), percent by mass Max)	-
Cl-5.2, Table-1 (vi) (Total alkalinity (NaOH), percent by mass, Max)	-
Cl-5.2, Table-1 (viii) (Nitrogen compounds (N), percent by mass, Max)	-
Cl-5.2, Table-1 (ix) (Sulphates (SO4), percent by mass, Max)	-
Cl-5.2, Table-1 (x) (Arsenic (As2O3), percent by mass, Max)	-
Cl-5.2, Table-1 (xi) (Heavy metals (Pb), percent by mass, Max)	-
Cl-5.2, Table-1 (xiii) (Chloride (Cl), percent by pass, Max)	-

-
-

IS 1285 (2023)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10 (MECHANICAL PROPERTIES)	-
Cl.9.1 (Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Copper- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Iron- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.9.1 (Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-

-
-

IS 10709 (1983)

Specification for brass wires for fourdrinier cloth

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
NA

IS 8877 (2023)

Acetoacetic methyl ester - Specification (Third Revision)

Rs. 4,060/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3.1 (Description)	-
Cl-3.2, Table-1 (i) (Assay, percent by mass, Min)	-
Cl-3.2, Table-1 (ii) (Acidity (as CH3COOH), percent by mass, Max)	-
Cl-3.2, Table-1 (iii) (Moisture content, percent by mass, Max)	-

-
-

IS 12640 : Part 1 (2024)

Residual current operated circuitBreakers without integral overcurrent protection for household and similar uses Rccbs: Part 1 general rules (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Marking)	-
8.1.1 (General)	-
8.1.2 (Mechanism)	-
8.1.3 (Clearance and creepage distance (External parts only))	-
8.1.3 (Clearance and creepage distance (Internal parts only))	-
9.15 (Trip free mechanism)	-
9.4 (Reliability of screws, current-carrying parts and connections)	-
9.5 (Reliability of terminals for external conductors)	-
9.6 (Protection againts electrci shock)	-
9.13 (Resistance to heat)	-
9.7.1 (Resistance to humidity)	-
9.7.2 (Insulation resistance of the main circuit)	-
9.7.3 (Dielectric strength of the main circuit)	-
9.8 (Temperature-rise)	-
9.14 (Resistance to abnormal heat and to fire)	-
9.25 (Resistance to rusting)	-

-
Testing facility not available for 1. Trip free mechanism, 2. Resistance of insulation against impulse voltage, 3. Reliability at 40 °C 4. Aging of electric components, 5. Mechanical and electrical endurance 6. Test sequence D 7. Test sequence E 8. Test sequence F, 9. Test sequence G, 10. Verification of the suitability of RCCB for use in IT system

IS 2692 (1989)

Ferrules for water services ? specification

All

3450/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Nominal Size )	-

-
-

IS 3521 : Part 4 (2021)

Personal Fall Arrest Systems Specification Part 4 Vertical rails and vertical lifelines incorporating a sliding-type fall arrester

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (general requirement)	-
4.2 (Requirements for vertical rails)	-
4.3 (" Requirements for permanent vertical lifelines ")	-
4.4 (" Requirements for temporary vertical lifelines ")	-
4.5.1 ("Fibre ropes and webbing ")	-
4.5.2 (" Wire ropes ")	-
4.5.3 (Terminations)	-
4.6 (Verticle life energy absorber)	-
4.7 (Sliding type fall Arrester Requirement)	-
4.8 (Requirement for connectors)	-
4.9 (Corrosion)	-
4.1 (" Locking performance after conditioning ")	-
4.11 (Locking Reliability)	-
4.12 (Dynamic Performance)	-

-
-

IS 17569 (2021)

Insulated Containers for Food Storage — Specification

4981 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (Manufacture and Workmanship)	-
5.3 (Manufacture and Workmanship)	-
7.1 (Material)	-
7.1.2 (Thickness)	-
7.1.2.1 (Requirements and Tests(Material) – Outer Protective Case and Accessories – Lead)	-
7.1.2.1 (Requirements and Tests(Material) – Outer Protective Case and Accessories – Cadmium)	-
7.1.2.8 (Bisphenol A(BPA))	-
7.3 (Capacity)	-
7.4 (Heat Retention Capability)	-
7.5 (Cold Retention Capability)	-
7.6.1 (Drop Impact Test)	-
7.6.2 (Pendulum Impact Test)	-
7.8 (Test for Strength of Shoulder Strap)	-
7.9 (Leakage Test)	-
7.10 (Joint Leak Test)	-
7.11 (Staining Test)	-
7.12 ("Check for PUF (Polyurethane Foam) or any Other Similar Thermal Insulation Material ")	-
7.13.1 (Length of the Shoulder Strap)	-
7.13.2 (Stability of Insulated Container)	-
7.13.3 (Cleaning)	-
7.14 (Seepage Test)	-
9.1 (Marking)	-
CLAUSE 5.2 (Welding Defects)	-
CLAUSE 7.1 (Materials)	-
CLAUSE 7.1.2.2 (Thickness of plastic)	-
"CLAUSE 7.1.2.1 " (Minimum Thickness of Outer Container)	-
"CLAUSE 7.1.2.1 " (Coating Thickness)	-
"CLAUSE 7.1.2.1 " (Salt Water Corrosion Test)	-
CLAUSE 7.1.2.1 (Adhesion Test)	-
CLAUSE 7.1.2.1 (Lead Limit)	-
CLAUSE 7.1.2.1 (Cadmium Limit)	-
CLAUSE 7.1.2.3 (Outer container or lid - thickness)	-

-
-

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4 (General Requirements)	-
Cl-5 (General Conditions for the tests)	-
Cl-6 (Classification)	-
Cl-7 (Marking)	-
Cl-8 (Safety Requirements)	-
Cl-9 (Endurance fpr motor and base assembly)	-
Cl-10.2 ("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-
Cl-10.3 (Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-
Cl-10.4 (Idli Batter)	-
Cl-10.5 (Operational Tests for Juicers)	-
Cl-11 (Temperature Withstand Test for Bowl)	-
Cl-13 (Strength of Assembly)	-
Cl-14.2, 14.3 Table-2 (i) (Protection against access to live parts)	-
Cl-14.2, Table-2 (ii) (Power input and current)	-
Cl-14.2, 14.3 Table-2 (iii) (Leakage current and electric strength at operating temperature)	-
Cl-14.2, Table-2 (iv) (Moisture resistance)	-
Cl-14.2, Table-2 (v) (Leakage current and electric strength)	-
Cl-14.2, 14.3 Table-2 (vi) (Provision for earthing)	-
Cl-19.11.4.2 (Radiated fields)	-
Cl-12.1 (Test for Switches)	-
Cl-19.11.4.1 (Electrostatic discharges)	-
Cl-19.11.4.3 (Fast transient bursts)	-
Cl-19.11.4.4 (Surge immunity test)	-
Cl-19.11.4.5 (Immunity to conducted discharges)	-
Cl-19.11.4.6 (Class 3 Voltage dips and interruptions)	-
Cl-19.11.4.7 (Harmonics)	-

-
Exclusions : Cl.19.11, Cl,19.12 EMI/EMC, Cl.24 components (as per IS 302 part 1)

IS 14569 (1999)

Commutators for electrical machines - Specification

Rs 2315/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11 (Electrical Tests)	-
12 (Humidity Test)	-
9 (Marking)	-

-
Exclusion : Spin Test (Cl. 13), Cl.6, Cl.7

First
Prev
1
2
3
4
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- sample@bis.gov.in

Scope List

No Record Found