BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- sample@bis.gov.in

Scope List

Reset

776 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

751

IS 210 (2009)

Grey iron castings - Specification (First Revision)

Rs.2700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-
7.1 (WORKMANSHIP AND FINISH)	-
10.1 (FREEDOM FROM DEFECTS)	-
10.2 (FREEDOM FROM DEFECTS)	-
13 (SIZE OF TEST BARS-Diameter)	-
13 (SIZE OF TEST BARS-Length)	-
15, Table 3 (TENSIL.E TEST- IS 1608 Part1 )	-
16, Table 3 (Hardness Test)	-
17,Annex B (TRANSVERSE TEST)	-

-
Since the composition of cast iron shall be left to the discretion ofthe manufacturer , as such element to be tested with specified requirement and tolerances if any may please be declared with method of testing. Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm.; Excluding -; Microstracture,Frequency of test,Tensile test(preparing of sample Above 28),Transverse test,Hydrostatic test

752

IS 1166 (1986)

Specification for condensed milk, partly skimmed and skimmed condensed milk (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5.1.10.1 (Salmonella IS 5887 Part 3)	-
Cl.5.1.10.1 (Shigella IS 5887 Part 7)	-
Cl.5.1.10.2 (Coliform Count IS 5401 Part 1)	-
Cl.5.1.10.3 (Yeast and Mould Count IS 5403)	-
Cl.5.1.10.4 (Coagulase positive Staphylococcus aureus IS 5887 Part 2)	-
Cl.5.1.10.5 (Escherichia coli IS 5887 Part 1)	-
Table 1 (i) (Apendix B) (Total milk solids -Condensed Milk)	-
Table 1 (ii) (IS : 11762- 1986) (Fat -Condensed Milk)	-
Table 1 (iii) (Apendix C) (Sucrose -Condensed Milk)	-
Table 1 (vi) (Apendix D) (Titratable acidity (as lactic acid) -Condensed Milk)	-

-
500 gm x 3

753

IS 1165 (2002)

Milk powder - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.5 (Bacterial count)	-
3.5.2 (Coliform count)	-
3.5.3 (Staphylococcus Aureus)	-
3.5.4 (Salmonella)	-
3.5.5 (Shigella)	-
3.1 (Description)	-
3.2 (Flavour and Taste)	-
3.4.5 (Moisture)	-
3.4.5 (Total solids)	-
3.4.5 (Fat)	-
3.4.5 (Insolubility index)	-
3.4.5 (Total ash)	-
3.4.5 (Titratable acidity (lactic acid))	-

-
500 gm x 3

754

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5 (Surface colour of the pipes shall be dark shade of grey)	-
Cl.7.1 (Mean outside diameter, outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-
Cl.7.1 ( outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-
Cl.7.1 ( wall thickness at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-
Cl.7.3.2 (Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-
Cl.8.1 (The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-
Cl.8.2 (When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-
Cl8.3 (This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-
Cl.8.4 (When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-
Cl. 9, IS 12235 Part 7 (Resistance to Sulphuric Acid)	-
Cl.10.1 (When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-
Cl.10.2 (When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-

-
Excluding Effect on water and Cl 10.1

755

IS 13428 (2005)

Packaged natural mineral water specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1.1 (Escherichia coli(or thermotolerant bacteria))	-
6.1.2 (Coliform , bacteria)	-
6.1.3 (Faecal Streptococci )	-
6.1.3 (Staphylococcus Aureus)	-
6.1.4 (Sulphite Reducing Anaerobes )	-
6.1.5 (Pseudomonas Aeruginosa )	-
6.1.6 (Yeast and Mould )	-
6.1.7 (Salmonella )	-
6.1.7 (Shigella)	-
6.1.8 (Vibrio cholera )	-
6.1.8 (Vibrio parahemolyticus)	-
6.2 Table-1 i (Colour)	-
6.2 Table-1 ii (Odour)	-
6.2 Table-1 iii (Taste)	-
6.2 Table-1 iv (Turbidity)	-
6.2 Table-1 v (Total dissolved solids)	-
6.2 Table-2 i (Nitrate (as NO3))	-
6.2 Table-2 ii (Nitrite (as NO2))	-
6.2 Table-2 iii (Sulphide (as H2S))	-

-
13 Litre for chemical and 12 lt for microbiology

756

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

Rs.8420/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 -Table 2- i (Fineness 4031 Part 2)	-
7 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3)	-
7 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3)	-
7 -Table 2- iii- a (Setting Time Initial- 4031 Part 5)	-
7 -Table 2-iii- b (Setting Time Final- 4031 Part 5)	-
7 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
7 -Table 2- vi (Drying Shrinkage- IS 4031 Part 10)	-
6 - Table - 1 i (Insoluble residue - Cl 7.4 of IS 4032:1985)	-
6 - Table - 1 ii (Magnesia - Cl 7.2 of IS 4032:1985)	-
6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-
6 - Table - 1 iv (Loss on ignition - Cl 7.1 of IS 4032:1985)	-
6 - Table - 1 v (Chloride content - Cl 4.13 of IS 4032:1985)	-
6 - Table - 1 vi ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-

-
Excluding Table 1,Clause 6.1 ,sl. no.(vi) , alkali content;

757

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.5 (Tensile Strength IS 12235(Part 13))	-
9.6 (Vicat Softening Temperature IS 12235 (Part 2).)	-
9.3 (Density IS 12235 (Part 14))	-
9.1 ( Visual Appearance)	-
7.2 and Table 5, 6 & 7 Fig 1B (Wall thickness, Max)	-
7.2 and Table 5, 6 & 7 Fig 1B (Wall thickness, Min)	-
7.2 and Table 5, 6 & 7 Fig 1B (Mean Outer Diameter over Connection)	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B (Wall thickness)	-

-
Excluding Test facility not avaialble for Cl 9.4 Resistance to External Blows ,9.7 Effect on Water;

758

IS 2029 (1998)

Ring wrenches (Spanners) - Specification (Fourth Revision)

Rs.3700/- View breakup
Total Rs.300x12+100 = Rs.3700.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4 (CARBON)	-
Cl.4 (SULPHUR)	-
Cl.4 (PHOSPHURS)	-
Cl.4 (MANGANESE)	-
Cl.4 (NITROGEN)	-
Cl.4 (SILICON)	-
Cl.4 (ALUMINIUM)	-
Cl.4 (CHROMIUM)	-
Cl.4 (NICKEL)	-
Cl.4 (VANADIUM)	-
Cl.4 (MOLYBDENUM)	-
3, Table-1 (Dimensions- s1)	-
3, Table-1 (Dimensions- s2)	-
3, Table-1 (Dimensions- a)	-
3, Table-1 (Dimensions- b1)	-
3, Table-1 (Dimensions- b2)	-
3, Table-1 (Dimensions- L)	-
5 (Hardness)	-
6 (Workmanship and Finish)	-
6 (Torque Testing)	-
7 (Designation)	-

-
Grade designation of material as per relevant IS may please declared.; Excluding -; torque test

759

IS 8944 (2005)

Chlorpyrifos, emulsifiable concentrates - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description)	-
3.2.2 (Cold Test)	-
3.2.3 (Flash Point (Abel))	-
3.2.4 (Emulsion Stability)	-
3.3.1 (Chloropyrifos content)	-
3.3.2 (Acidity (as H2SO4), )	-

-
Excluding Cl. 3.3.1 Content;

760

IS 9798 (2013)

Low pressure regulators for use with liquefied petroleum gas (LPG) - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 IS 742 (Material)	-
4.1.1 IS 2305 (Material)	-
4.2.1a (Finish)	-
4.2.1b IS 9844 IS 6009 (Finish)	-
4.3.1 (Diaphragm Material)	-
4.3.2 IS 3400(Part 4) (The material shall not show change of more than 10 IRHD when subjected to ageing of 72 h at 70°C in accordance with the method prescribed in 3 or 4 of IS 3400 (Part 4))	-
4.3.3 (Clamping test)	-
4.3.4 Annex C (Bursting & Pull out test)	-
4.3.5ai Annex D (The material shall, after immersion in n-pentane or octet commercial LPG for 72 h, meet the appropriate requirements specified in Annex D Diaphragm: Extractable )	-
4.3.5b IS 3400(Part 2) (Changes in hardness, before and after the immersion )	-
4.3.7 Annex E (The material shall have 25 percent max compression set when subjected to compression set test in accordance with the method prescribed in Annex E.)	-
4.4.1 (Valve Pad Material)	-
4.4.2ai Annex D (The material shall, after immersion in n-pentane or octet commercial LPG for 72 h, meet the appropriate requirements specified in Annex D Extractable )	-
4.4.2aii Annex D ( Absorbed)	-
4.4.2b IS 3400(Part 2) (Changes in hardness, before and after the test)	-
4.4.3 IS 3400(Part 4) (The material shall not show change of more than 10 IRHD when subjected to ageing of 72 h at 70°C in accordance with the method prescribed in 3 or 4 of IS 3400 (Part 4))	-
4.4.4 (Valve Pad Material)	-
4.4.5 Annex E (The material shall have 40 percent max compression set when subjected to compression set test in accordance with the method prescribed in Annex E.)	-
4.5,4.4.1 (Seals O rings and rubber components other than diaphragm and valve pad )	-
4.5,4.4.2i Annex D (The material shall, after immersion in n-pentane or octet commercial LPG for 72 h, meet the appropriate requirements specified in Annex D Extractable )	-
4.5,4.4.2ii Annex D ( Absorbed)	-
4.5,4.4.2b IS 3400(Part 2) (Changes in hardness, before and after the test)	-
4.5,4.4.3 IS 3400(Part 4) (The material shall not show change of more than 10 IRHD when subjected to ageing of 72 h at 70°C in accordance with the method prescribed in 3 or 4 of IS 3400 (Part 4))	-
4.5,4.4.5 Annex E (The material shall have 40 percent max compression set when subjected to compression set test in accordance with the method prescribed in Annex E.)	-
4.5,4.4.1 (Seals O rings and rubber components other than diaphragm and valve pad )	-
4.5,4.4.2i Annex D (The material shall, after immersion in n-pentane or octet commercial LPG for 72 h, meet the appropriate requirements specified in Annex D Extractable )	-
4.5,4.4.2ii Annex D ( Absorbed)	-
4.5,4.4.2b IS 3400(Part 2) (Changes in hardness, before and after the test)	-
4.5,4.4.3 IS 3400(Part 4) (The material shall not show change of more than 10 IRHD when subjected to ageing of 72 h at 70°C in accordance with the method prescribed in 3 or 4 of IS 3400 (Part 4))	-
4.5,4.4.5 Annex E (The material shall have 40 percent max compression set when subjected to compression set test in accordance with the method prescribed in Annex E.)	-
4.5,4.4.1 (Seals O rings and rubber components other than diaphragm and valve pad )	-
4.5,4.4.2i Annex D (The material shall, after immersion in n-pentane or octet commercial LPG for 72 h, meet the appropriate requirements specified in Annex D Extractable )	-
4.5,4.4.2ii Annex D ( Absorbed)	-
4.5,4.4.2b IS 3400(Part 2) (Changes in hardness, before and after the test)	-
4.5,4.4.3 IS 3400(Part 4) (The material shall not show change of more than 10 IRHD when subjected to ageing of 72 h at 70°C in accordance with the method prescribed in 3 or 4 of IS 3400 (Part 4))	-
4.5,4.4.5 Annex E (The material shall have 40 percent max compression set when subjected to compression set test in accordance with the method prescribed in Annex E.)	-
5.2 (Construction and Workmanship)	-
5.5 (Inlet Connection)	-
5.5 (Inlet Connection)	-
5.5 (Inlet Connection)	-
5.6,5.6.1 (Outlet Connection:- Non-threaded Outlet Connection)	-
5.7 (Body)	-
5.8 (Vent)	-
5.10.1 (Valve Pad Fitting)	-
5.11.1,8.11 Table 1 (The fixing of the inlet connection on to the regulator body , whether it is of the threaded or non - threaded type or in one piece, shall withstand the following tests, under the conditions defined in 8.11 (see Table 1))	-
5.11.1,8.11 Table 1 (The fixing of the inlet connection on to the regulator body , whether it is of the threaded or non - threaded type or in one piece, shall withstand the following tests, under the conditions defined in 8.11 (see Table 1))	-
5.12.1,8.11 Table 3 (The regulators when installed as indicated in the installation instruction shall resist the following tests under the conditions defined in 8.11 (see Table 3 ))	-
5.11.2a,8.11 Table 2 (The fixing of the outlet connection on to the regulator body, whether it is of the threaded, or non-threaded type or in one piece, shall resist the following tests, under the conditions defined in 8.11 (see Table 2):a)For non - threaded hose connection)	-
5.11.2b,8.11 Table 2 (The fixing of the outlet connection on to the regulator body, whether it is of the threaded, or non-threaded type or in one piece, shall resist the following tests, under the conditions defined in 8.11 (see Table 2):b)For threaded unions)	-
6,6.1,6.2 (SOUNDNESS)	-
6,6.1,6.2 (SOUNDNESS)	-
6.3 (SOUNDNESS)	-
6.4 (SOUNDNESS)	-
8.2 (CHATTER)	-
8.9 (Performance (Before Cycle test, Low Temp. Test and High Temp. Test) Inlet Pressure Flow Rate )	-
8.9 (0.5 kgf/cm2 100 % )	-
8.9 (17 kgf/cm2 10 % )	-
8.9 (Static(lock up) pressure)	-
8.9 (Performance (Before Cycle test, Low Temp. Test and High Temp. Test) Inlet Pressure Flow Rate )	-
8.10.1 Annex G (Cycle Test)	-
6,6.1,6.2 (SOUNDNESS (After Cycle Test))	-
8.9 (Performance (After Cycle test) Inlet Pressure Flow Rate )	-
8.10.2 Annex H 8.9 (Low Temperature Test Performance test after exposure to temperature at -200 C for 10 Min and back to ambient condition. Inlet Pressure Flow Rate)	-
8.9 (Static(lock up) pressure)	-
8.10.3 Annex H 8.9 (High Temperature Test Performance test after exposure to temperature at 650 C for 10 Min and back to ambient condition. Inlet Pressure Flow Rate)	-
8.9 (0.5 kgf/cm2 100 % )	-
8.9 (17 kgf/cm2 10 % )	-
8.9 (Static(lock up) pressure)	-
4.4.5 Annex E (The material shall have 40 percent max compression set when subjected to compression set test in accordance with the method prescribed in Annex E.)	-
Cl. 4.2 (Aluminium)	-
Cl. 4.2 (Copper)	-
Cl. 4.2 (Magnesium)	-
Cl. 4.2 (Iron)	-
Cl. 4.2 (Lead)	-
Cl. 4.2 (Cadmium)	-
Cl. 4.2 (Tin)	-
Cl. 4.2 (Thalium+ Indium)	-
Cl. 4.2 (Nickel)	-
Cl. 4.2 (Zinc)	-
Cl. 4.2 (Chromium)	-

-
-

761

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

- View breakup
Rs.16650/- for single core unarmoured cable, Rs.22500/- for two core, unarmoured cable, Rs.26700/- for two core armoured cable (Excluding addl. Type test for cables with improved fire performance.) For multi core cables, extra charges @ 35 % for each additional core shall be levied. Material testing charges as per relevant referred ISs Testing charges for Additional Type Tests for Improved Fire Performance Tests: Rs. 7100/- for category C1 Rs. 11700/- for category C2

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (MATERIALS : CONDUCTOR)	-
4.1.1 (INSULATION : General Purjose Insulaiion)	-
4.1.2 (INSULATION : Heat Resisting Insulation)	-
5.1 (MATERIALS : FILLER AND INNER SHEATH)	-
6.1 (MATERIALS : ARMGURING)	-
7.1.1 (OUTER SHEATH : For Cables with General Purpose InsuIafion)	-
7.1.2 (OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-
8.1 (CONSTRUCTION : CONDUCTOR)	-
8.2 (CONSTRUCTION : CONDUCTOR)	-
9.2 (INSULATION : Thickness of Insulation)	-
9.4 (INSULATION : Application of Insulation)	-
10.1 (CORE IDENTIFICATION)	-
10.2 (CORE IDENTIFICATION)	-
10.3 (CORE IDENTIFICATION)	-
10.3.1 (Arrangement of Marking)	-
11.1 (LAYING UP OF CORES)	-
12.1 (INNER SHEATH)	-
12.2 (INNER SHEATH)	-
12.3 (INNER SHEATH :Thickness of Inner Sheath)	-
13.1.1 (ARMOURING : Application)	-
13.1.2 (Armouring: Coverage )	-
13.1.3 (ARMOURING : Direction of lay )	-
13.2 (ARMOURING : Type of Armour)	-
13.3 (Armouring : Dimensions -Wire Diameter)	-
13.3 (Armouring : Dimensions -Formed wire )	-
13.4 (ARMOURING : Joints)	-
13.5.1 (ARMOURING : Resistance)	-
13.5.2 (ARMOURING : Resistance)	-
13.6 a) (ARMOURING: Tensile Strength)	-
13.6 b) (ARMOURING: Elongation )	-
13.6 f) (ARMOURING: Mass of zinc coating )	-
13.6 g) (ARMOURING: Resistivity)	-
14.1 (OUTER SHEATH)	-
14.3 (OUTER SHEATH : Colour )	-
14.4.1 (Thickness of Outer Sheath : Unarmowed Cables)	-
14.4.2 (Thickness of Outer Sheath : Armoured Cables)	-
15.1 a) 1) (Tests on conductor : Annealing test ( for copper ))	-
15.1 a) 2) (Tensile test (for aluminium) - Before stranding )	-
15.1 a) 2) (Tensile test (for aluminium) - After stranding )	-
15.1 a) 3) (Tests on conductor : Wrapping test ( for aluminium ))	-
15.1 a) 4) (Tests on conductor : Conductor resistance test)	-
15.1 a) 4) (Resistance test - Neutral conductor )	-
15.1 d)1) (Phyaical tests for insulation : Tensile Test)	-
15.1 d)1) (Phyaical tests for insulation : Elongation )	-
15.1 d)1) (Physical tests for sheath : Tensile stregth )	-
15.1 d)1) (Physical tests for sheath : Elongation )	-
15.1 d)2) (Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-
15.1 d)2) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-
15.1 d)2) (Phyaical tests for insulation - Ageing in air oven : Elongation )	-
15.1 d)2) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-
15.1 d)2) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-
15.1 d)2) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-
15.1 d)2) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-
15.1 d)5) ( Loss of mass in air oven- Insulation )	-
15.1 d)5) ( Loss of mass in air oven- sheath )	-
15.1 d)3) (Phyaical tests for insulation : Shrinkage )	-
15.1 d)3) (Phyaical tests for insulation : Shrinkage - Crack observed )	-
15.1 d)3) (Phyaical tests for Sheath : Shrinkage )	-
15.1 d)3) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-
15.1 d)4) (Hot deformation : Insulation )	-
15.1 d)4) (Hot deformation : Sheath )	-
15.1 d)6) (Heat shock test- Insulation )	-
15.1 d)6) (Heat shock test- sheath )	-
15.1 d)7) (Thermal stability- insulation )	-
15.1 d)7) (Thermal stability- Sheath )	-
15.1 e) (Insulation resistance test : Volume Resistivity )	-
15.1 e) (Insulation resistance test : IR Constant )	-
15.1 f) (High voltage test ( water immersion test ))	-
15.1 g) (High voltage test at room temperature)	-
16.4 (Flammability Test)	-
15.4 a) (Cold bend test- Insulation ( Optional test))	-
15.4 a) (Cold bend test- Sheath ( Optional test))	-
15.4 b) (Cold impact test- Insulation ( Optional test))	-
15.4 b) (Cold impact test- Sheath ( Optional test))	-
15.4 c) (Armour resistance test ( for other than mining cables ).- Optional test )	-
17.1 (IDENTIFICATION : Manufacturer’s Identification)	-
17.2 (IDENTIFICATION : Cable Identification)	-
17.3 (IDENTIFICATION : Cable Code)	-
13.6 c) (ARMOURING: Torsion Test (For round wire ) )	-
13.6 d) (ARMOURING: Winding Test(For formed wire))	-
13.6 e) (ARMOURING: Uniformity of zinc coating)	-
Cl.8 (Conductor, Number of wires.)	-
Cl.8 (Conductor, Number of wires.)	-
Cl.8 (Flexibility class)	-
[(Cl.15), (d), 2] (After ageing, Elongation of Sheath [Percentage])	-

-
Except Cat C1 & C2

762

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

- View breakup
Rs. 8100/- Excluding Impact and Y-Groove crackability Test

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 18 (Weight)	-
Cl 15 (Length, Width & Thickness)	-
Cl 10.3 (UTM)	-
Cl 7 (Workmanship)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Clause - 5, 8.1 & 8.2 (E250, ALUMINIUM)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Grade/Designation, Quality type of killing and declaration regarding micro alloying elements addition may please be declared. Sample size- 5 pcs of 5 cm x 5 cm having dia> 3mm and thickness >0.8 mm; Excluding -; Y-groove crackability test

763

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

- View breakup
Rs 16740/- Excluding Pull Out Test and micro-alloying elements

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9.4 (Load In Other Direction From Bend)	-
Cl 9.3 (Load In One Direction)	-
Cl 8.1 (UTM)	-
Cl 5 (Deformations and Surface Characteristics)	-
Cl 7.2 (Weight)	-
4.1 (Carbon %)	-
4.1 (Sulphur %)	-
4.1 (Phosphorus %)	-
4.1 (Manganese %)	-
4.1 ( Nitrogen%)	-
4.1 (Sulphur and phosphorous)	-
4.1 (CE)	-

-
Microalloying element/type of killing (element)/any other element to be declared; Excluding -; Pull out test, proof stress

764

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

- View breakup
For category 01 Unsheathed cable: A Single Core, Plain Copper Conductor Rs. 10500/- B Single Core, Tinned Copper Conductor Rs.10800/- C Single Core, Solid Aluminium Conductor Rs.10200/- D Single Core, Stranded Aluminium ConductorRs.10200/- Sheathed Cable: A Single Core, Plain Copper Conductor Rs. 17550/- B Single Core, Tinned Copper Conductor Rs.17850/- C Single Core, Solid Aluminium ConductorRs.17250/- D Single Core, Stranded Aluminium Conductor Rs.17250/- For category 02 Unsheathed Cable: A Single Core, Plain Copper Conductor ?12150/- B Single Core, Tinned Copper Conductor ?12450/- C Single Core, Solid Aluminium Conductor ?11850/- D Single Core, Stranded Aluminium Conductor ?11850/- Sheathed Cable: A Single Core, Plain Copper Conductor ?18900/- B Single Core, Tinned Copper Conductor ?19200/- C Single Core, Solid Aluminium Conductor ?18600/- D Single Core, Stranded Aluminium Conductor ?18600/- For FR cables Unsheathed Cable: A Single Core, Plain Copper Conductor ?12600/- B Single Core, Tinned Copper Conductor ?12900/- C Single Core, Solid Aluminium Conductor ?12300/- D Single Core, Stranded Aluminium Conductor ?12300/- Sheathed Cable: A Single Core, Plain Copper Conductor ?19650/- B Single Core, Tinned Copper Conductor ?19950/- C Single Core, Solid Aluminium Conductor ?19350/- D Single Core, Stranded Aluminium Conductor ?19350/- For FR-LSH cables Unsheathed Cable A Single Core, Plain Copper Conductor ?13950/- B Single Core, Tinned Copper Conductor ?14250/- C Single Core, Solid Aluminium Conductor ?13650/- D Single Core, Stranded Aluminium Conductor ?13650/- Sheathed Cable: A Single Core, Plain Copper Conductor ?20820/- B Single Core, Tinned Copper Conductor ?21120/- C Single Core, Solid Aluminium Conductor ?20520/- D Single Core, Stranded Aluminium Conductor ?20520/- Material testing charges as per relevant referred Iss (For each of the above category). For multi core cable: for each additional core, the changes of single core unsheathed cable as per material (copper & aluminum) and as per construction of conductor (solid or standard, tinned or plain) shall be added

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Conductor - Material)	-
4.1 (Tensile test (for Al)-Before Stranding)	-
4.1 (Tensile test (for Al)- After Stranding)	-
4.1 (Annealing test (for copper))	-
4.1 (Wrapping test (for Al))	-
4.2 (Conductor resistance test)	-
5.1 (Insulation)	-
5.2 (Application )	-
5.3 (Thickness of Insulation)	-
6.1 (Filler)	-
6.2 (Filler)	-
7 (Binder Tape)	-
8.1 (Sheath Material )	-
8.3 (Thickness of Sheath)	-
9 (Overall dimensions)	-
9.1 (Ovality)	-
10.1 (HV (water immersion))	-
10.2 (HV (room temperature))	-
10.4 (Flammability test-Burning after flame removal)	-
10.4 (Flammability test- Unaffected portion)	-
10.9 (Additional ageing test (OU cables only) -HV test (at 60±3oC))	-
10.11 (Per sulphate test (for tinned Cu cable only))	-
11 (Identification)	-
11.1 (Durability)	-
11.2 (Legibility)	-
12 (CONSTRUCTION Core Identification)	-
Table 1 iii) c) 1) (Tensile strength (Without ageing))	-
Table 1 iii) c) 1) (Elongation (Without ageing))	-
Table 1 iii) c) 2) (Loss of mass- Insulation )	-
Table 1 iii) c) 3) (Tensile strength (After ageing))	-
Table 1 iii) c) 3) (TS variation)	-
Table 1 iii) c) 3) (Elongation (After ageing))	-
Table 1 iii) c) 3) (Elongation variation)	-
Table 1 iii) c) 4) (Shrinkage-Insulation)	-
Table 1 iii) c) 4) (Cracks Observed)	-
Table 1 iii) c) 5) (Heat shock-Insulation )	-
Table 1 iii) c) 6) (Hot deformation - Indentation depth- Insulation)	-
Table 1 iii) c) 7) (Thermal stability- Insulation )	-
Table 1 iii) c) 8) (Cold bend for insulation)	-
Table 1 iii) c) 9) (Cold impact for insulation)	-
Table 1 iii) d) 1) (Sheath -Tensile strength (Without ageing))	-
Table 1 iii) d) 1) (Sheath- Elongation (Without ageing))	-
Table 1 iii) d) 2) (Loss of mass- Sheath )	-
Table 1 iii) d) 3) (Sheath- Tensile strength (After ageing))	-
Table 1 iii) d) 3) (Sheath- TS variation)	-
Table 1 iii) d) 3) (Sheath- Elongation (After ageing))	-
Table 1 iii) d) 3) (Sheath- Elongation variation)	-
Table 1 iii) d) 4) (Shrinkage- Sheath )	-
Table 1 iii) d) 4) (Cracks Observed)	-
Table 1 iii) d) 5) (Heat shock-Sheath )	-
Table 1 iii) d) 6) (Hot deformation -Indentation depth - Sheath )	-
Table 1 iii) d) 7) (Thermal stability- Sheath )	-
Table 1 iii) d) 8) (Cold bend for sheath)	-
Table 1 iii) d) 9) (Cold impact for sheath)	-
table 1 e) 3) (Volume Resistivity - Room temp )	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-
table 1 e) 3) (IR constant- Room temp )	-
table 1 e) 3) (IR constant- max. Temp)	-
Table 1 iii) c) 8) (Cold bend for insulation)	-
Table 1 iii) c) 9) (Cold impact for insulation)	-
Table 1 iii) d) 8) (Cold bend for sheath)	-
Table 1 iii) d) 9) (Cold impact for sheath)	-
Table 1 (Category Code)	-
10.11 (Persulphate Test )	-
4.1 (Conductor - Material)	-
4.1 (Conductor - Material)	-
4.1 (Conductor - Material)	-
8 (SHEATH)	-
18 (SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH RIGID CONDUCTOR (CLASS 1 AND CLASS 2) FOR GENERAL PURPOSE ) FOR MAXIMUM CONDUCTOR TEMPERATURE (70°C OR 85°C))	-
4.1 (Material)	-
(4.3 of IS 8130:2013) (Form of Conductor)	-
( 4.4.1 of IS 8130:2013) (Joints in Conductor)	-
(4.4.2 of IS 8130:2013) (Joints in Conductor Solid Conductors (Aluminium Conductors only))	-
(Cl.6.1.1 of IS 8130:2013) (Solid Conductor (Class 1))	-
(Cl.6.1.2 of IS 8130:2013) (Solid Conductor (Class 1))	-
(Cl.6.1.3 of IS 8130:2013) (Solid Conductor (Class 1))	-
(6.2.1 of IS 8130:2013) (Stranded Circular Non-compacted Conductors (Class 2))	-
(6.2.2 of IS 8130:2013) (Stranded Circular Non-compacted Conductors (Class 2))	-
(6.2.3 of IS 8130:2013) (Stranded Circular Non-compacted Conductors (Class 2))	-
(6.3.1 of IS 8130:2013) (Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-
(6.3.2 of IS 8130:2013) (Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-
(6.3.3 of IS 8130:2013) (Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-
( 6.4.1 of IS 8130:2013) (Flexible Conductors (Class 5))	-
(6.4.2 of IS 8130:2013) (Flexible Conductors (Class 5))	-
( 6.4.3 of IS 8130:2013) (Flexible Conductors (Class 5))	-
Cl.19.1.4 (Assembly of Cores)	-
Cl. 8.2 (Application of Sheath)	-

-
Test facility not available for FR, FR-LSH category.

765

IS 15658 (2006)

Precast concrete blocks for paving - Specification

Rs.15940/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.2.4 (WATER ABSORPTION TEST (Average for three test specimens))	-
6.2.5 (AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens) )	-

-
Excluding -; Abrasion Resistance Test a ( Dry & Wet)

766

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

- View breakup
Testing charges) for the product are: i) Including Transverse Strength (optional test) test 9,700.00 ii) Excluding Transverse Strength (optional test) test 8,500.00 -Testing charges for only chemical test report: 4,900.00 -Testing charges for only physical test report including optional tests: 4,800.00 -Testing charges for only physical test report excluding optional tests: 3,600.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 Table-2 viii (Alkali content)	-
6.1 Table-2 vii (Chloride content)	-
6.1 Table-2 vi (Loss on ignition)	-
6.1 Table-2 v (Total Sulphur Content calculated as Sulphuric Anhydride)	-
6.1 Table-2 iv (Magnesia)	-
6 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
6.1 Table-2 iii. (Insoluble residue)	-
6.1 Table-2 ii. (Ratio of percentage of alumina to that of iron oxide)	-
6.1 Table-2 viii (Alkali content)	-
6.1 Table-2 vii (Chloride content)	-
6.1 Table-2 vi (Loss on ignition)	-
6.1 Table-2 v (Total Sulphur Content calculated as Sulphuric Anhydride)	-
6.1 Table-2 iv (Magnesia)	-
6 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
6.1 Table-2 iii. (Insoluble residue)	-
6.1 Table-2 ii. (Ratio of percentage of alumina to that of iron oxide)	-
7 Table-3 iv c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
7 Table-3 iv b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 Table-3 iv a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 Table-3 iii b (Setting Time Final)	-
7 Table-3 iii a (Setting Time Initial)	-
7 Table-3 ii b (Expansion by Autoclave)	-
7 Table-3 ii a (Expansion by Le Chatelier)	-
7 Table-3 i. (Fineness)	-

-
Excluding Table 2,Clause 6.1 ,sl. no.(viii) , alkali content;

767

IS 710 (2010)

Marine plywood - Specification (Second Revision)

Rs 11200/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (WORKMANSHIP AND FINISH )	-
7.2 (WORKMANSHIP AND FINISH )	-
7.3 (WORKMANSHIP AND FINISH )	-
7.5 (WORKMANSHIP AND FINISH )	-
6.1 (DIMENSIONS)	-
6.2 (DIMENSIONS)	-
6.3 (DIMENSIONS)	-
9.1.1 (MOISTURE CONTENT)	-
9.1.2 , 9.1.2.1 (Glue Adhesion in Dry State)	-
9.1.2 , 9.1.2.2 (Glue Adhesion in Dry State)	-
9.1.3 , 9.1.3.1.1 (Water resistance test)	-
9.1.3 , 9.1.3.1.2 (Water resistance test)	-
9.1.5 (Mycological test)	-
9.1.4 (Tensile strength)	-
9.1.6 (Table 3) (Static bending strength)	-
9.1.6 (Table 3) (Static bending strength)	-
9.1.7 (Table 4) (Wet bending strength)	-
9.1.7 (Table 4) (Wet bending strength)	-
9.1.8 (Retention of preservative)	-
11.1 (MARKING)	-

-
-

768

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.3 (Tensile Test)	-
7.3 (Elongation at Break)	-
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-

-
Excluding Environmental strees cracking resistance test and Cl 7.1 & Table 2 Hydraulic test;

769

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

- View breakup
Rs. 4250/-(Excluding leakage test and Hyd. Proof Test)+Testing charges as per IS 14151(Part 1)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.2.1 (Visual and Workmanship Requirement)	-
4.2.7 (1 Dimensions of Quick Coupled Pipes and Fittings)	-

-
-

770

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

- View breakup
Rs.8420/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 - Table - 1 v (Chloride content - Cl 4.13 of IS 4032:1985)	-
6 - Table - 1 iv (Loss on ignition - Cl 7.1 of IS 4032:1985)	-
6 - Table - 1 i (Insoluble residue - Cl 7.4 of IS 4032:1985)	-
6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-
6 - Table - 1 ii (Magnesia - Cl 7.2 of IS 4032:1985)	-
6 - Table - 1 vi ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-
7 -Table 2- vi (Drying Shrinkage- IS 4031 Part 10)	-
7 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
7 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 -Table 2-iii- b (Setting Time Final- 4031 Part 5)	-
7 -Table 2- iii- a (Setting Time Initial- 4031 Part 5)	-
7 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3)	-
7 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3)	-
7 -Table 2- i (Fineness 4031 Part 2)	-

-
Excluding Table 1,Clause 6 ,sl. no.(vi) , alkali content;

771

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.1 (Colour)	-

-
Excluding Effect on water

772

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 8.3 (Carbon Black Content)	-
7.4 table -3 & 4 (6.1 Dimensions)	-
8.2 (Longitudinal Reversion Test)	-
Cl 8.3 (Carbon Black Dispersion)	-
8.7 (Density)	-
8.4 ( Melt Flow Rate)	-
7.4.1.2 (Ovality)	-
7.2 (Length)	-
6.2 (Colour)	-
6.2.1 (6.1.1 Identification Stripes)	-

-
Excluding Oxidation induction , overall migration, Cl 8.7 density, Cl 7.4.1.2 ovality Cl 8.8 Tensile,Cl 8.9 Elongation at Break;

773

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.1 (Workmanship & Finish)	-
9.2 (Workmanship & Finish)	-
9.3 (Workmanship & Finish)	-
11.1 (Dimensions - Height)	-
11.1 (Dimensions - Width)	-
9.3 (Workmanship & Finish)	-
11.1 (Dimensions - Thickness)	-
11.1 (Dimensions - Variation in thickness)	-
11.1 (Dimensions - Thickness)	-
11.1 (Dimensions - Width)	-
11.1 (Dimensions - Height)	-
9.1 (Workmanship & Finish)	-
9.2 (Workmanship & Finish)	-
9.3 (Workmanship & Finish)	-
11.14 (Glue Adhesion Test)	-
11.13 (Knife Test)	-
11.12 (End immersion test)	-
Clause 11.11 (Varying Humidity Test)	-
11.10 (Misuse Test)	-
11.9.2 (Slamming Test)	-
11.8 (Buckling Test)	-
Clause 11.7 (Shock Resistance Test)	-
11.4 (Impact Indentation Test)	-
Clause 11.2 (General Flatness Test)	-
11.1 (Dimensions - Squareness)	-
11.1 (Dimensions - Height)	-
11.1 (Dimensions - Width)	-

-
Excluding Test facility not available for Cl 11.2, 11.4, 11.6, 11.8, 11.9;

774

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

Rs. 5250/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9 (Workmanship)	-
Cl 10.2 (Workmanship)	-
Cl 10.3 (Workmanship)	-
Cl 11 (Length, Width & Thickness)	-
6.1 (Carbon %)	-
6.1 (Sulphur %)	-
6.1 (Phosphorus %)	-
6.1 (Silicon %)	-
6.1 ( Aluminium %)	-
6.1 ( Nitrogen%)	-
6 (Sulphur + Phosphorus)	-
6.1 ( Nb)	-
6.1 (V)	-
6.1 ( Ti)	-
6 (carbon equivalent (CE))	-
6 (Copper as Cu)	-
Clause 6, Table 1 Note : 3 (Nb+V+Ti)	-
6.1 (Cr)	-
6.1 (Mo)	-
6.1 (Ni)	-
Cl 6.1 (Manganese)	-

-
-

775

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

- View breakup
Rs 5900/- for BWR Grade, Rs.6800/- for MR grade

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.2.6 (Spot test - Annexure L)	-
9.2.5 (Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-
9.2.5 (Modulus of elasticity - AVERAGE - Annexure K)	-
9.2.5 (Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-
9.2.5 (Modulus of rupture - AVERAGE - Annexure K)	-
9.2.4 (Mycological Test [for MR grade only] - Annexure J)	-
9.2.3 (Adhesion of Plies - Annexure H)	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-
9.2.1 (Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Delamination - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-
7.3 (Dimensional Requirements - Variation in thickness - Annexure E)	-
7.3 (Dimensional Requirements - Squareness - Annexure D)	-
7.3 (Dimensional Requirements - Edge Straightness - Annexure D)	-
7.3 (Dimensional Requirements - Thickness - Annexure E)	-
7.3 (Dimensional Requirements - Width - 8.1.4)	-
7.3 (Dimensional Requirements - Length - 8.1.4)	-
8.1.3, 6.3.3, IS 1328 (Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-
8.1.3, 6.3.3, IS 303 (Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-
9.2.6 (mechanical) (Spot test - Annexure L)	-

-
SIZE: One Block Board Sample Size without dimensional measurements:Length-1200 mm, width-1200

776

IS 13334 : Part 1 (2014)

Skimmed milk powder - Specification: Part 1 standard grade (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.6 (Bacterial count)	-
5.6 (Coliform count )	-
5.6 (Escherichia coli)	-
5.6 (Coagulase positive Staphylococcus aureus)	-
5.6 (Salmonella)	-
5.6 (Spore count, Aerobic (Bacillus cereus))	-
5.6 (Spore count, Anaerobic (Sulfite reducing Clostridia))	-
5.6 (Listeria monocytogenes)	-
4 (Description)	-
Cl 5.1 (Milk intended (IS 1479 - Part 1))	-
5.2 (Absence of extraneous matter, added colour and added flavour)	-
Cl 5.3 (Calcium chloride, citric acid and sodium citrate, sodium salts of orthophosphoric acid and polyphosphoric acid (as linear phosphate), )	-
Cl 5.4 (The flavour of the product or of the reconstituted milk shall be pleasant and clean (see IS 10030).)	-
5.6 (Moisture)	-
5.6 (Milk protein in milk solids not fat)	-
5.6 (Milk fat)	-
5.6 (Insolubility index)	-
5.6 (Milk fat)	-
5.6 (Titratable acidity (lactic acid))	-
5.6 (Scorched particles)	-
5.6 (Total ash (on dry basis))	-
5.6 (Coliform count )	-
5.6 (Salmonella)	-
5.6 (Bacterial count)	-

-
500 gm x 3

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- sample@bis.gov.in

Scope List