BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- sample@bis.gov.in

Scope List

Reset

787 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 1694 (2024)

Tartrazine, food grade - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 Table 1 (i) (Total dye content - IS 1694:2024)	-
3.1 Table 1 (ii) (Loss on drying at 135° C and Chlorides and sulphates - IS 1699: 1995)	-
3.1 Table 1 (iii) (Water Insoluble Matter- IS 1699:1995)	-
3.1 Table 1 (iv) (Combined ether extracts- IS 1699:1995)	-
3.1 Table 1 (vii) (Lead - IS 1699:1995)	-
3.1 Table 1 (viii) (Arsenic- IS 1699:1995)	-
3.1 Table 1 (ix) (Mercury - IS 1699:1995)	-
3.1 Table 1 (x) (Copper - IS 1699:1995)	-
3.1 Table 1 (xi) (Chromium - IS 1699:1995)	-
3.1 Table 1 (xii) (Cadmium - IS 1699:1995)	-

-
-

IS 15219 (2024)

Aluminium phosphide powder formulation - Specification (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description - IS 15219:2002)	-
3.3.1 (Aluminium Phosphide Content - IS 6438:1980)	-

-
-

IS 12300 (2024)

Gas Cylinder Valves for Small Refrigerant Cylinders -Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3.1 (Chemical Composition)	-

-
-

IS 249 (2022)

SODIUM BICHROMATE TECHNICAL SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2 , Table No. 1 , i) (Free moisture and combined water)	-
3.2 , Table No. 1 , ii) (Sodium bichromate (Na2Cr2O7) content)	-
3.2 , Table No. 1 , iii) (Sulphates (as Na2SO4))	-
3.2 , Table No. 1 , iv) (Chlorides ( as NaCl ),)	-
3.2 , Table No. 1 , v) (Calcium compounds (as CaSO4),)	-
3.2 , Table No. 1 , vi) (Matter insoluble in water)	-
3.2 , Table No. 1 , vii) (pH value (of aqueous solution))	-

-
-

IS 15489 (2024)

Paint, Plastic Emulsion —Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-6.1 (Composition)	-
Cl-6.2 (Conditions in the Container)	-
Cl-6.3 (Thinning)	-
Cl-6.4 (Application Properties)	-
Cl-6.5 (Mass in kg/10 litres)	-
Cl-6.6 (Opacity)	-
Cl-6.9 (Lead Restriction)	-
Cl-6.10, Table-1 (i) (Consistency)	-
Cl-6.10, Table-1 (ii) ("Drying time, Max a) Surface dry b) Hard dry:")	-
Cl-6.10, Table-1 (iii) (Finish)	-
Cl-6.10, Table-1 (iv) (Gloss at 60°: Class A, B, C, D)	-
Cl-6.10, Table-1 (v) (Colour)	-
Cl-6.10, Table-1 (vii) (Resistance to alkali)	-
Cl-6.10, Table-1 (x) (Recoating properties)	-

-
-

IS 7092 : Part 2 (1987)

Specification for aluminium alloy tube for irrigation purposes: Part 2 extruded tube (Second Revision)

11230 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1 (Copper- IS 504 or any other established instrumental/ chemical method)	-
Cl. 6.1 (Magnesium- IS 504 or any other established instrumental/ chemical method)	-
Cl. 6.1 (Silicon- IS 504 or any other established instrumental/ chemical method)	-
Cl. 6.1 (Iron- IS 504 or any other established instrumental/ chemical method)	-
Cl. 6.1 (Manganese- IS 504 or any other established instrumental/ chemical method)	-
Cl. 6.1 (Zinc- IS 504 or any other established instrumental/ chemical method)	-
Cl. 6.1 (Chromium- IS 504 or any other established instrumental/ chemical method)	-
Cl. 6.1 (Titanium and/ other grain refining elements)	-
Cl. 6.1 (Aluminium- IS 504 or any other established instrumental/ chemical method)	-

-
-

IS 17803 (2022)

POTABLE WATER BOTTLES (COPPER, STAINLESS STEEL, ALUMINIUM) SPECIFICATION

All

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (Manufacture and Workmanship)	-
7.1 (Materials)	-
7.1.1 (copper bottle - copper)	-
7.1.1 (copper bottle – lead)	-
7.1.1 (copper bottle – bismuth)	-
7.1.1 (copper bottle – total impurities)	-
7.1.4 (Auxillary closure- Bisphenol A (BPA))	-
7.12 (Food safe test/Leaching test)	-
7.12 (Water potability)	-
7.13 (Turbidity)	-
7.13 (pH value)	-
7.13 (Taste threshold)	-
7.13 (Colour, Hazen units)	-
7.13 (Odour)	-
7.13 (Total dissolved solids)	-
7.1.2 (Note 1), Annex B (Amendment 1)- Sensorial test (Annex B (Amendment 1)- Sensorial test)	-
15. 7.1.2 (Note 1), Annex A (Amendment 1)- Leaching of food grade stainless steel (Annex A (Amendment 1)- Leaching of food grade stainless steel)	-
7.1.2.1 (Stainless steel bottle (material))	-

-
-

IS 2556 : Part 2 (2024)

Vitreous China Sanitary Appliances âSpecification Part 2 Specific Requirements of Washdown Water Closets (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3 (GENERAL REQUIREMENTS)	-
Cl-5 (DIMENSIONS AND TOLERANCES)	-
Cl-6 (CONSTRUCTIONS)	-
As per Clause 5 - Table 1 - i) (Height - A)	-
As per Clause 5 - Table 1 - ii) (Depth of water seal, Min - H)	-
As per Clause 5 - Table 1 - iii) (Width of water closet - J)	-
As per Clause 5 - Table 1 - iv) (Distance from centre of seat bolt hole to front of water closet - K)	-
As per Clause 5 - Table 1 - v) (Distance from centre of seat bolt hole to inside face of flush rim at back, Max - L)	-
As per Clause 5 - Table 1 - vi) (Distance between a vertical line from tip of back plate to inside face of flush rim at back, Max - O)	-
As per Clause 5 - Table 1 - vii) (Width of opening, Min - P)	-
As per Clause 5 - Table 1 - viii) (Length of opening, Min - Q)	-
As per Clause 5 - Table 1 - ix) (Overall length - S)	-
As per Clause 5 - Table 1 - x) (Trap inlet depth, Min - T)	-
As per Clause 5 - Table 1 - xi) (Water surface Back to front - W1)	-

-
-

IS 251 (2024)

SODA ASH, TECHNICAL â SPECIFICATION (fifth revision)

Technical

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 ("Description ( IS 251 : 2024 )")	-
4.2 ("Bulk Density ( IS 251 : 2024 )")	-
4.3 ("Volatile Matter Content ( IS 251 : 2024 )")	-
4.4 ("Sieve Analysis of Dense Grade Soda Ash ( IS 251 : 2024 )")	-
4.4.1 ("Material retained on 1.70 mm IS Sieve ( IS 251 : 2024 )")	-
4.4.1 ("Material passing through 75 μm IS Sieve ( IS 251 : 2024 )")	-
4.5 Table 1 (i) ("Total alkalinity (as Na₂CO₃) ( IS 251 : 2024 )")	-
4.5 Table 1 (ii) ("Matter insoluble in water ( IS 251 : 2024 )")	-
4.5 Table 1 (iii) ("Sulphate (Na₂SO₄) ( IS 251 : 2024 )")	-
4.5 Table 1 (iv) ("Chloride (as NaCl) ( IS 251 : 2024 )")	-
4.5 Table 1 (5) ("Iron (as Fe₂O₃) ( IS 251 : 2024 )")	-

-
-

IS 2365 (2024)

STEEL WIRE ROPES FOR LIFTS - MINIMUM REQUIREMENTS (Third revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Material)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding only C & S tested for dia < 3mm; breaking load (Cl 5) (For dia Up to 18 and above 22 mm), In case of Wire samples, sample received should have individual wire strand dia < 3mm for complete testing.

IS 15558 (2024)

INSTANTANEOUS DOMESTIC WATER HEATER FOR USE WITH LPG SPECIFICATION First Revision of IS 15558

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4 (General Requirements)	-

-
-

IS 879 (2024)

Sodium Nitrite â Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Description)	-
Cl-4.2, Table-1 (i) (Moisture and volatile matter, percent by mass, Max)	-
Cl-4.2, Table-1 (iii) (Matter insoluble in water, percent by mass, Max)	-
Cl-4.2, Table-1 (iv) (Alkalinity (as Na2CO3), percent by mass, Max)	-
Cl-4.2, Table-1 (v) (Chloride (as Cl), percent by mass, Max)	-
Cl-4.2, Table-1 (xi) (Potassium (as K), percent by mass, Max)	-
Cl-4.2, Table-1 (ix) (Arsenic (as As), percent by mass, Max)	-
Cl-4.2, Table-1 (x) (Calcium and magnesium (as Ca), percent by mass, Max)	-
Cl-4.2, Table-1 (iv) (Alkalinity (as Na2CO3), percent by mass, Max)	-

-
Ok

IS 11782 (2024)

Sodium Cyanide, Technical - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3.1 (Description)	-
Cl-3.2, 6.3.2, Table-1 (v) (Moisture, percent by mass, Max)	-
Cl-3.2, 6.3.2, Table-1 (vii) (Matter insoluble in water, percent by mass, Max)	-
Cl-3.2, 6.3.2, Table-1 (vi) (Sulphides (as S), percent by mass, Max)	-
Cl-3.2, 6.3.2, Table-1 (iv) (Sodium chloride (as NaCl), percent by mass, Max)	-

-
-

IS 4320 (2024)

Thiram technical - Specification Second Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description - IS 4320:2024)	-
3.2, 7.1, Table 1 (i) (Bis (dimethylthiocarbamoyl) disulphide - IS 4320:2024)	-
3.2, 7.1, Table 1 (ii) (Loss on drying at 60°C -- IS 4320:2024)	-
3.2, 7.1, Table 1 (iii) (Ash content - IS 4320:2024)	-

-
-

IS 1538 (1993)

Cast iron fittings for pressure pipes for water, gas and sewage - Specification (Third Revision)

Rs 2700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (tensile strength)	-
6.1 (Brinell hardness tests)	-
8 (Hydrostatic Test)	-
9.1,Table 2 & 3 (DI)	-
9.1,Table 2 & 3 (P)	-
9.1,Table 2 & 3 (g)	-
9.1,Table 2 & 3 (h)	-
9.1,Table 2 & 3 (K)	-
9.1,Table 2 & 3 (L)	-
9.1,Table 2 & 3 (M)	-
9.1,Table 2 & 3 (N)	-
9.1,Table 2 & 3 (f)	-
9.1,Table 4 (D)	-
9.1,Table 4 (a)	-
9.1,Table 4 (b)	-
9.1,Table 4 (s)	-
9.1,Table 4 (r)	-
9.1,Table 5 (D)	-
9.1,Table 5 (g)	-
9.1,Table 5 (a)	-
9.1,Table 5 (b)	-
9.1,Table 5 (c)	-
9.1,Table 5 (f)	-
9.1,Table 5 (s)	-
9.1,Table 5 (C)	-
9.1,Table 5 (Holes No)	-
9.1,Table 5 (Holes diameter)	-
9.1,Table 6 (Diameterof Bolts)	-
9.1&11.1,Table 7,8&9 (e)	-
9.1&11.1,Table 7,8&9 (l)	-
9.1&11.1,Table 7,8&9 (Mass (Approx))	-
9.1&11.1,Table 10 to13 (e)	-
9.1&11.1,Table 10 to13 (a)	-
9.1&11.1,Table 10 to13 (r)	-
9.1&11.1,Table 10 to13 (b)	-
9.1&11.1,Table 10 to13 (Mass (Approx))	-
9.1&11.1,Table 14 (Nominal Diameter)	-
9.1&11.1,Table 14 (e1)	-
9.1&11.1,Table 14 (e)	-
9.1&11.1,Table 14 (l)	-
9.1&11.1,Table 14 (h)	-
9.1&11.1,Table 14 (Mass (Approx))	-
9.1&11.1,Table 15 (e)	-
9.1&11.1,Table 15 (l)	-
9.1&11.1,Table 15 (Nominal Diameter)	-
9.1&11.1,Table 15 (e1)	-
9.1&11.1,Table 15 (k)	-
9.1&11.1,Table 15 (Mass (Approx))	-
9.1&11.1,Table 16 (e)	-
9.1&11.1,Table 16 (l)	-
9.1&11.1,Table 16 (h)	-
9.1&11.1,Table 16 (Mass (Approx))	-
9.1&11.1,Table 17 (e1)	-
9.1&11.1,Table 17 (l1)	-
9.1&11.1,Table 17 (Nominal Diameter)	-
9.1&11.1,Table 17 (e2)	-
9.1&11.1,Table 17 (l2)	-
9.1&11.1,Table 17 (l3)	-
9.1&11.1,Table 17 (l)	-
9.1&11.1,Table 17 (Mass)	-
9.1&11.1,Table 18 (a)	-
9.1&11.1,Table 18 (P)	-
9.1&11.1,Table 18 (Mass (Approx))	-
9.1&11.1,Table 19 (DC)	-
9.1&11.1,Table 19 (e)	-
9.1&11.1,Table 19 (a)	-
9.1&11.1,Table 19 (l)	-
9.1&11.1,Table 19 (Mass (Approx))	-
9.1&11.1,Table 20 (DI)	-
9.1&11.1,Table 20 (h)	-
9.1&11.1,Table 20 (Mass (Approx))	-
9.1&11.1,Table 21 (e)	-
9.1&11.1,Table 21 (r)	-
9.1&11.1,Table 21 (a)	-
9.1&11.1,Table 21 (b)	-
9.1&11.1,Table 21 (Mass (Approx))	-
9.1&11.1,Table 22 (e)	-
9.1&11.1,Table 22 (r)	-
9.1&11.1,Table 22 (a)	-
9.1&11.1,Table 22 (b)	-
9.1&11.1,Table 22 (c)	-
9.1&11.1,Table 22 (a)	-
9.1&11.1,Table 22 (f)	-
9.1&11.1,Table 22 (g)	-
12.1 to 12.7 (Coating )	-

-
-

IS 2508 (2024)

Polyethylene Films and Sheets â Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2.1.1/ Table-1,2,3 &4 (Nominal Thickness, Annex C,)	-
5.2.1.2 (Nominal Width)	-
5.2.1.1/ Table-1,2,3 &4 (Nominal Thickness, Annex C,)	-

-
-

IS 10116 (2015)

Boric acid - Specification (First Revision)

Please see remarks View breakup
Testing Charge for Boric Acid- a) Special Quality (SQ) Grade= 13.25x300+10x9+700 =Rs. 4765/-= Rs. 4800/- (Rounded off) Testing Charge for Boric Acid- b) Technical (TECH) Grade= 5.25x300+9x9+300 =Rs. 1956/-= Rs. 2000/- (Rounded off) Testing Charge for Boric Acid- c) Explosive Grade= 6.25x300+9x9+350 =Rs. 2306/-= Rs. 2300/- (Rounded off)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2, 4.3, 4.4, Table 1 (Boric acid (as H3BO3 ))	-
4.2, 4.3, 4.4, Table 1 (Moisture)	-
4.2, 4.3, 4.4, Table 1 (Water insoluble matter)	-
4.2, 4.3, 4.4, Table 1 (Heavy metals (as Pb))	-
4.2, 4.3, 4.4, Table 1 (Iron (as Fe))	-
4.2, 4.3, 4.4, Table 1 (Ca)	-
4.2, 4.3, 4.4, Table 1 (As)	-
4.2, 4.3, 4.4, Table 1 (Na)	-
4.2, 4.3, 4.4, Table 1 (Cl)	-
4.2, 4.3, 4.4, Table 1 (Sulphate (as SO4 ))	-
4.2, 4.3, 4.4, Table 1 (Phosphate (PO4 ))	-
4.5 (Additional Requirement for Technical Grade Boric Acid)	-
4.6 (Boric Acid for Use in Explosives)	-

-
GRADE OF BORIC ACID AS PER CL. 3 OF IS 10116 MAY BE DECLARED

IS 2002 (2024)

Steel Plate for Pressure Vessel for Intermediate and High Temperature Service Including Boilers â Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (General requirements)	-
Cl-7.1, Table-1 (Carbon)	-
Cl-7.1, Table-1 (Manganese)	-
Cl-7.1, Table-1 (Silicon)	-
Cl-7.1, Table-1 (Sulphur)	-
Cl-7.1, Table-1 (Phosphorus)	-

-
CHEMICAL COMPLETE

IS 14186 (2024)

Diflubenzuron wettable powder WP - Specification First Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description - IS 14186:2024)	-
3.3, 7.1 Table 1 (i) (Diflubenzuron Content - IS 14185:2024)	-
3.3, 7.1Table 1 (ii) (Material passing through 44 micron IS sieve - IS 6940:1982)	-
3.3, 7.1 Table 1 (iii) (Suspensibility - IS 6940:1982)	-
3.3, 7.1 Table 1 (iv) (Acidity (as H2SO4) - IS 6940:1982)	-
3.3, 7.1 Table 1 (v) (Wettability - IS 6940:1982)	-

-
COMPLETE

IS 16440 (2016)

Stainless steel milk cans - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2 (Carbon)	-
5.2 (Sulphur)	-
5.2 (phosphorus)	-
5.2 (Manganese)	-
5.2 (Silicon)	-
5.2 (Chromium)	-
5.2 (Nickel)	-
5.2 (molybdenum)	-
3.0 (Capacity test)	-
6.3 (Hardness test)	-
6.1 (Pressure check for leakage and bulging)	-
6.2 (Drop test)	-
6.4 (Dye penetration test)	-
"As per Clause 4 & Table 1" (Shape & Dimensions)	-
As per Clause 5.4 (Thickness of parts)	-
As per Clause 5.5 (Mass of can (Weight))	-
As per Clause 5.6 (Construction)	-
Clause 5.6.1 (Body)	-
As per Clause 5.6.2 (Handle)	-
Clause 5.6.3 (Bottom ring)	-

-
-

IS 11010 (2024)

Ziram suspension concentrate (SC)- Specification (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
CL 3.1.1 (Description)	-
Table 1, S.No (i) (Ziram Content)	-
Table 1, S.No (ii) (Suspensibility)	-
Table 1, S.No (iii) (Colloidal Content)	-
Table 1, S.No (iv) (pH of Suspension at 27°C)	-

-
-

IS 14929 (2022)

Mixed polyolefin fibre ropes (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-7, Table-1 (Linear densitybc- Nominal ktex)	-
Cl-7, Table-2 (Linear densitybc- Tolerance %)	-

-
-

IS 17154 (2024)

Battery Operated Motorized Tricycle — Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Tubing)	-
Cl-4 (Shape and dimensions)	-
Cl-5.2 (Standard Tricycle Components)	-
Cl-5.3.1 (Seat)	-
Cl-5.3.2 (Back Rest)	-
Cl-5.4.1 (Foot Rest)	-
Cl-5.4.2 (Seat Walls)	-
Cl-5.4.3 (Tool Box)	-
Cl-5.5 (Spring Wire)	-
Cl-5.6 (metallic components)	-
Cl-5.7 (Timber)	-
Cl-6.1 (Frame)	-
Cl-6.2 (Steering Handle Bar)	-
Cl-6.3 (Driving Mechanism)	-
Cl-6.4 (Tyres and Tubes)	-
Cl-6.5 (Wheel Rims)	-
Cl-6.7 (Brakes)	-
Cl-6.8 (Front Wheel Hub)	-
Cl-6.9 (Rear Wheel Hub)	-
Cl-6.10 (Tool Box)	-
Cl-6.11 (Armrest)	-
Cl-6.12 (Lubrication)	-
Cl-6.14 (Accessories)	-
Cl-7 (Foinish)	-
Cl-8.2 (Manoeuvrability)	-
Cl-8.3 (Static Load Test)	-
Cl-8.4 (Brake Test)	-
Cl-8.5 (Test for Finish)	-
Cl-9 (Marking)	-

-
Partial

IS 1475 (2024)

Drinking Water Coolers - Specification (Fourth Revision)

Sample quantity required : 2 piece

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Classification)	-
5 (Construction)	-
14 a) (Protection against electric shock)	-
14 b) (High voltage (electric strength) test)	-
14 c) (Leakage current tests)	-
14 d) (Provision for earthing)	-

-
Testing facility available only parameters for: 1.Protection against electric shock (Clause 8 of IS 302-1) 2.High voltage (electric strength) test (Clause 13.3 of IS 302-1) 3.Leakage current tests (Clause 13.2 of IS 302-1) 4.Provision for earthing (Clause 27.5 of IS 302-1)

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

Please see remarks View breakup
For stranded conductors with 7 strands - Rs 4200 For stranded conductors with 19 strands - 22 hrs Rs 6600 For stranded conductors with 37 strands- 30 hrs Rs 9000 For stranded conductors with 61 strands- 50 hrs Rs 15000

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
16.2 (Visual Examination)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.4, Table 2 (Measurement of Diameter of Individual Aluminium Alloy Wires)	-
16.5, Table 2 (Breaking Load Test - before stranding)	-
16.5, Table 2 (Breaking Load Test - after stranding)	-
16.6, Table 1 (Elongation Test - before stranding)	-
16.6, Table 1 (Elongation Test - after stranding)	-
16.7, Table 2 (Resistivity Test)	-
16.8 (Wrapping Test)	-
11 (Stranding)	-
8 (Freedom from defects)	-
16.10, Table 3 (d.c. Resistance Test on Stranded Conductor)	-

-
Test facility complete up to size 100 sq.mm, Test facility not available above size 100 sq.mm (Ultimate tensile strength test, DC resistance test, Stress-strain test on conductor )

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

16700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-6.1 (Dimensions (length))	-
Cl-6.2 (Thickness)	-
Cl-6.3 (Squareness)	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6 (Workmanship and finish)	-
Cl-9.3 (Moisture Content)	-
Cl-9.4.2 (Glue Adhesion in Dry State- Adhesion of Plies)	-
Cl-9.4.1 (Glue Adhesion in Dry State- Glue Shear Strength -Average)	-
Cl-9.5.1.1 (Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-
Cl-9.6 (Tensile Strength-Along the grain)	-
Cl-9.7 (Mycological Test -Adhesion)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-9.9, Table-3 (i) a (Wet Bending Strength- Modulus of Elasticity (MOE)- Average)	-
Cl-9.9, Table-3 (i) b (Wet Bending Strength- Modulus of Elasticity (MOE),-Minimum individual)	-
Cl-9.4.2 (Adhesion of Plies)	-
5.1.1 (Defects in veneers)	-
Cl-9.10 (Retention of Preservative)	-
Cl-9.11 (Formaldehyde Content Test)	-

-
(Test facility not available in CL)- Cl 9.8 Static Bending Strength Above 15 mm thickness, Cl 9.9 Wet Bending Strength Above 15 mm thickness, Steady State Formaldehyde Emission Test (Cl. 9.12) Sample Qty required for testing: 1 Full Sheet

IS 4783 (2024)

Thiram powder for dry seed treatment - Specification (second revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description - IS 4783:2024)	-
3.2.2 (Colour - IS 4783:2024)	-
3.2.3 (Sieving Requirement 150 micron sieve - IS 4783:2024)	-
3.3.1. (Thiram Content - IS 4320:2024)	-
CL.3.3.1 (Thiram Content)	-

-
-

IS 17043 : Part 2 (2024)

Shoes: Shoes for General Purpose

20400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Shape and Design)	-
Cl-5.3 (Material)	-
Cl-5.4, Table-1 (i) (Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-
Cl-5.4, Table-1 (ii) (Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-
Cl-5.4, Table-1 (iii) (Whole shoe flexing, flexes)	-
Cl-5.4, Table-1 (iv) (Water proofness on complete shoe)	-
Cl-5.4, Table-1 (v) (Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-
Cl-5.4, Table-1 (vi) (Attachment strength of strap and buckle/D-ring N)	-
Cl-5.4, Table-1 (vii) (Attachment strength of strap and velcro , N, Min)	-
Cl-5.4, Table-1 (viii) (Strength of eyelet attachment, N, Min)	-
Cl-5.4, Table-1 (ix) (Heel pull off strength, N, Min)	-
Cl-5.4, Table-1 (x) (Top piece attachment strength, N, Min)	-
Cl-5.4, Table-1 (xi) (Seam strength, N/mm, Min)	-
Cl-5.4, Table-1 (xii) (Whole shoe topline strength, N, Min)	-
Cl-5.4, Table-1 (xiii) (Abrasion resistance (volume loss), mm3)	-
Cl-6.1.1, Table-2 (i) (Tear trength, N)	-
Cl-6.1.1, Table-2 (ii) (Flexing resistance, flexes)	-
Cl-6.1.1, Table-2 (v) (Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-
Cl-6.3, Table-7 (i) (Flexing index, Min)	-
Cl-6.3, Table-7 (ii) (Abrasion resistance at 400 cycles)	-
Cl-6.3, Table-7 (iii) (Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-
Cl-6.4, Table-8 (i) (Thickness, mm, Min)	-
Cl-6.4, Table-8 (ii) (Abrasion resistance)	-
Cl-6.4, Table-8 (iii) (Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-

-
-

IS 303 (1989)

Plywood for General Purposes -

Rs 4000/- /BWR Grade, Rs.4900/- for MR Grade Rs 4000/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8 (Dimensions & Tolerances - Edge Straightness - Annexure C)	-

-
-

IS 17043 : Part 1 (2024)

Shoes - Specification Part 1 Shoes for Services

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.2 (Design)	-
Cl-4.3.1 (Size)	-
Cl-4.3.2 (Weight)	-
Cl-4.4 (Height of Upper)	-
Cl-4.5, S.Cl-4.5.2 (Ergonomic Feature)	-
Cl-4.5, S.Cl-4.5.3 (Bond Strength)	-
Cl-4.5, S.Cl-4.5.4 (Slip Resistance)	-
Cl-4.5.5.1 (Electrical Properties-Antistatic footwear)	-
Cl-4.5, S.Cl-4.5.6 (Heat Insulation of Sole Complex)	-
Cl-4.5, S.Cl-4.5.7 (Cold Insulation of Sole Complex)	-
Cl-4.6.1 (Material)	-
Cl-4.6.2 (Tear Strength)	-
Cl-4.6.3 (Water Vapour Permeability and Coefficient)	-
Cl-4.6.4 (Water Penetration and Water Absorption)	-
Cl-4.7.1 (Material)	-
Cl-4.7.2 (Tear Strength)	-
Cl-4.7.3 (Abrasion Resistance)	-
Cl-4.7.4 (Water Vapour Permeability and Coefficient)	-
Cl. 4.8.1 (Material)	-
Cl-4.8.2 (Abrasion Resistance)	-
Cl-4.8.3 (Water Absorption and Desorption)	-
Cl-4.9.3 (Abrasion Resistance)	-
Cl-4.10 (Toe Puff and Counter Stiffener)	-
Cl-4.11.1 (Material)	-
Cl-4.11.2 (Tear Strength)	-
Cl-4.13.2 (Thickness)	-

-
Mechanical Test Facility (Partial): Except (i)Energy absorption at seat region cl 4.3.8 (ii) Pull out a test of an eyelet (Cl 4.14) Sample Size Requirement: 4 pairs for complete testing along with raw material with specified requirements as per ISs and For abrasion resistance to outsole, the raw material of 10 mm min. thickness required.

First
Prev
2
3
4
5
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- sample@bis.gov.in

Scope List