BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- sample@bis.gov.in

Scope List

Reset

143 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 2721 (2003)

Galvanized steel chain link fence fabric - Specification (Second Revision)

6910 View breakup
Rs.5950/- (for wire below 5 mm Dia), Rs.6910/- (for wires above 5 mm Dia) and Material testing charges as per relevant referred Iss

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6.1, 6.2, Table 1 (Mesh Size)	-
Cl.6.3, Table 1 (Width of the fabric)	-
Cl.6.3, Table 1 (Length of the fabric)	-
Cl.6.1, 6.2, Table 1 (Nominal Dia of Mesh wire)	-
Cl. 7.2 and Table 1 (Line Wire (Diameter))	-
Cl. 7.2 and Table 1 (Line Wire (Number of wires))	-
Cl.8 (Chain link fence fabric(Mass of zinc coating)- IS 6745)	-
Cl.9.1.1 (Tensile test of mesh and line wires- IS 1608)	-
Cl.9.1.2 (Wrapping test of mesh and line wires-IS 1755)	-
Cl.9.1.4 (Bend test of mesh and line wires- IS 1608)	-
Cl.9.1.3 (Twist test of mesh and line wires-IS 1717)	-
Cl.9.2 (Line wire (Mass of zinc coating)- IS 6745)	-
Cl.5 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

IS 17404 (2020)

Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheets and Strips ” Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (C -IS 228)	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (S - IS 228)	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (P - IS 228 )	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Mn - IS 228)	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Al - IS 228)	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Si - IS 228)	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Cu - IS 228)	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Yield strength - IS 1608(Pt-1))	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Tensile Strength - IS 1608(Pt-1))	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Elongation - IS 1608(Pt-1))	-
10.1 (Coil Internal Diameter-IS17404)	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Width)	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Length)	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Thickness)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding Except Coating;

IS 14650 (1999)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling purposes - Specificaation

Rs. 450/- (only for dimensions and marking). View breakup
Rs. 450/- (only for dimensions and marking).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6 (Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6 (Aluminium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

IS 14491 (1997)

Low carbon high strength cold rolled steel sheets and coils for cold forming - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 & 7.2 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Aluminium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Titanium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Vanadium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Niobium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

IS 4151 (1993.0)

Protective helmets for motorcycle riders - Specification

testing charges for the product are Rs. 27300/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Shell)	-
4.5 (Metal Parts)	-
6.1 (General)	-
6.2 (Shell)	-
6.3 (Protactive Padding)	-
6.4 (Retention System)	-
6.7 (Peripheral Vision)	-
6.8 (Workmanship and Finish)	-
7.2 (Impact Absorption Test)	-
7.3 (Rigidity Test)	-
7.4 (Projections and Surface Friction Test)	-
7.5 (Dynamic Test of Retention System)	-
7.6 (Audibility Test)	-
7.7 (Retention Test of Helmet)	-
7.8 (Micro-Slip Test of the Chin Strap)	-
7.9 (Test for Resistance to Abrasion of the Chin Strap )	-
7.10.2 (Ease of Release)	-
7.10.3 (Durability of Quick Release Mechanism)	-

-
IS superseded by newer version;

IS 12367 (1988)

Specification for cold - Rolled carbon steel strips/coils for manufacture of welded tubes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 & 4.2 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 & 4.2 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 & 4.2 (Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 & 4.2 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 & 4.2 (Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

IS 12146 (1987)

Specification for carbon manganese steel forgings for pressure vessels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

IS 3205 (1984)

Specification for precipitated barium carbonate, technical (First Revision)

Rs 1575/- Grade 1; Rs 1125/- for Gr 2 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2, Table 1 and Appendix A-2 of IS 3205 (Barium (as Ba ) - for All Grades)	-
3.2, Table 1 and Appendix A-4 of IS 3205 (Moisture - For Grade 1 )	-
3.2, Table 1 and Appendix A-4 of IS 3205 (Moisture - For Grade 2)	-
3.2, Table 1 and Appendix A-5 of IS 3205 (Matter insolubile in hydrochloric acid - For Grade 1)	-
3.2, Table 1 and Appendix A-5 of IS 3205 (Matter insolubile in hydrochloric acid - For Grade 2)	-
3.2, Table 1 and Appendix A-6 of IS 3205 (Free Alkali - For Grade 2)	-
3.2, Table 1 and Appendix A-7 of IS 3205 (Water Soluble Sulphide ( as BaS ) -For Grade 1)	-
3.2, Table 1 and Appendix A-7 of IS 3205 (Water Soluble Sulphide ( as BaS ) -For Grade 2)	-
3.2, Table 1 and Appendix A-8 of IS 3205 (Total Sulphur ( as SO4 ) - For Grade 1)	-
3.2, Table 1 and Appendix A-9 of IS 3205 (Alkali and other metasulphates ( as BaSO4 ) - For Grade 1 )	-
3.2, Table 1 and Appendix A-9 of IS 3205 (Alkali and other metasulphates ( as BaSO4 ) - For Grade 2)	-
3.2, Table 1 and Appendix A-10 of IS 3205 (Sodium Oxides ( as NaO2 ) - For Grade 1)	-
3.2, Table 1 and Appendix A-11 of IS 3205 (Iron ( as Fe2O3) - For Grade 1)	-
3.2, Table 1 and Appendix A-11 of IS 3205 (Iron ( as Fe2O3) - For Grade 2)	-
3.2, Table 1 and Appendix A-12 of IS 3205 (Tap Density - For Grade 1)	-
3.2, Table 1 and Appendix A-13 of IS 3205 (Residue retained on 63 micron IS sieve - For Grade 1)	-
3.2, Table 1 and Appendix A-14 of IS 3205 (Reaction efficiency ( after 45 minutes ) - For Grade 2)	-

-
-

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

Rs.3750.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 & Table 1 (Diameter & Difference Between Two Reading On Any Two Diameters)	-
Cl 9 (Tensile Test On UTM)	-
Cl 11 (Workmanship)	-
Cl 13 (Workmanship)	-
6 AND AS PER IS 7887 (CARBON)	-
6 AND AS PER IS 7887 (SULPHUR)	-
6 AND AS PER IS 7887 (PHOSPHORUS)	-
6 AND AS PER IS 7887 (MANGANESE)	-
6 AND AS PER IS 7887 (SILICON)	-
6 AND AS PER IS 7887 (ALUMINIUM)	-
6 AND AS PER IS 7887 (MICRO ALLOY)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

IS 11169 : Part 2 (1989)

Steels for cold heading/cold extrusion applicationsspecification: Part 2 stainless steels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1,6.2 Table 2 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Other(Titanium)- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

IS 9516 (1980)

Specification for heat resisting steels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1,5.2,5.3 Table 4 (Carbon-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Sulphur-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Phosphorous-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Manganese-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Nitrogen-Relevant parts of IS 228)	-
4 (FREEDOM FROM DEFECTS)	-
6, Table 2 (i) Yield stess/.2% Proof stress, Mpa)	-
6, Table 2 (ii)Ultimate Tensile Strength, Mpa)	-
6, Table 2 (iii)Elongation, %)	-
6, Table 2 (iv) Hardness, HBW)	-
7 (DIMENSIONS AND TOLERANCE)	-
5.1,5.2,5.3 Table 4 (Silicon-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Nickel-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Chromium-Relevant parts of IS 228)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm. Grade/Designation as per Table 4 may also be declared.; Excluding -; Cl 4.1 Internal Defacts, Cl 6.2 0.2% Proof Stress, Cl 8.2.2 Tests pieces prparation

IS 9476 (1980)

Specification for cold-rolled steel strips for carbon steel razor blades

525 for Physical + carbide density test View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Carbon- IS 228)	-
4.1 (Manganese- IS 228)	-
4.1 (Silicon- IS 228)	-
4.1 (Sulphur- IS 228)	-
4.1 (Phosphorous- IS 228)	-
4.1 (Chromium- IS 228)	-
4.1 (Sulphur+Phosphorous- IS 228)	-
3.1 (Nitrogen- IS 228)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

IS 10212 : Part 1 (1986)

General requirements of packages for explosives: Part 1 coommercial high explosives (First Revision)

900 View breakup
Rs. 900/- excluding bursting strength.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5.3.1, 5.4.1, 5.4.2 - Table 2 - i) (Bursting Strength)	-
Cl.5.3.1, 5.4.1, 5.4.2 - Table 2 - ii) (Water Absorption Cobb/30 min )	-

-
-

IS 9295 (1983)

Specification for steel tubes for idlers for belt conveyors (First Revision)

Rs 5100/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
7.1 (Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
8.1.1 Table 1 (Tensile Strength- IS 1608(1))	-
8.1.1 Table 1 (Yield Strength- IS 1608)	-
8.1.1 Table 1 (Elongation Percent- IS 1608)	-
8.2 (Drift Expansion Test- IS 2335)	-
8.3 (Flattening Test- IS 2328)	-
9.1 Table 2 (Outside Diameter)	-
9.1 Table 2 (Thickness)	-
9.1 Table 2 (Mass)	-
10 (Hardness)	-
13.1.1 (Ovality)	-
13.1.2 (Eccentricity)	-
15.1 (Straightness)	-
16.1 (Length)	-
17.1 (Surface Protection)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

IS 9825 (2003)

Chlorine tablets - Specification (Second Revision)

Rs.4330/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.2 (Description)	-
Cl.4.3 (Available Chlorine (Annex A))	-
Cl.4.4 (Moisture (Annex B))	-
Cl.4.3 (Size (Mass of tablet))	-

-
-

IS 8952 (1995)

Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes - Specification (First Revision)

Rs 4840/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4,7.1 Table 1 (Carbon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Sulphur- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Phosphorous- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Manganese- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Nb+V+Ti - IS 228 or any other established instrumental /Chemical method)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

IS 8951 (2001)

Steel cast billet ignots, billets and blooms for production of high carbon steel wire rods - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4,7.1 & 7.2 Table 1 (Carbon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Manganese- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Silicon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Sulphur- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Phosphorous- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Copper- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Nickel- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Chromium- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Nitrogen- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Cu+Ni+Cr- IS 228 or any other established instrumental /Chemical method)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

IS 1397 (2020)

Kraft Paper for Packing and Wrapping — Specification ( Third Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.2 (Finish)	-
Cl 5.3 (Size)	-
Cl 5.5 Table 1 S.No.i i) (pH, Min)	-
Cl 5.5 Table 1 S.No. iii) (Burst index )	-
Cl 5.5 Table 1 S.No. iv) (Tear index (each direction))	-
Cl 5.5 Table 1 S.No. v) (Tensile index CD)	-
Cl 5.5 Table 1 S.No. v) (Tensile index MD)	-
Cl 5.5 Table 1 S.No. vi) (Folding endurance, CD)	-
Cl 5.5 Table 1 S.No.vii) (Cobb value Front,, 60 sec 27°C)	-
Cl 5.5 Table 1 S.No.vii) (Cobb value Back,, 60 sec 27°C)	-
Cl 5.6 Table 2 S.No.i) (pH)	-
Cl 5.6 Table 2 S.No.ii) (Ash)	-
Cl 5.6 Table 2 S.No.vii) (Alkalinity ( as CaCO3 ),)	-
Cl 5.6 Table 2 S.No.v) (Sulphates ( as Na2SO4 ),)	-
Cl 5.6 Table 2 S.No.vi) (Fatty and/or similar acids)	-
5.4 (Substance)	-
Cl 5.6 Table 2 S.No.iii) (Elongation at break, CD)	-
Cl 5.6 Table 2 S.No.iii) (Elongation at break, MD)	-
5.2, 5.2.1 (Finish (Grade 1) )	-
5.2, 5.2.2 (Finish (Grade 2) )	-
5.2, 5.2.3 (Finish (Grade 3) )	-

-
-

IS 7494 (1981)

Specification for steel for valves for internal combustion engines (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1, 6.2, 6.3, & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, & Table 1 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Steel designation as per table 1 may plese be declared Sample size shall be minimum dia> 3mm and thickness > 0.8 mm.;

IS 879 (1981)

Specification for sodium nitrite (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1.1 (Description)	-
3.1.2 (Description)	-
3.2 Table 1 (i) (Moisture and volatile matter, )	-
3.2 Table 1 (ii) (Assay ( as NaNO2 ),)	-
3.2 Table 1 (iii) (Matter insoluble in water, )	-
3.2 Table 1 (iv) (Alkalinity ( as Na2CO3 ),)	-
3.2 Table 1 (v) (Chloride ( as Cl ),)	-
3.2 Table 1 (vi) (Sulphate ( as SO2 ), )	-
3.2 Table 1 (vii) (Heavy metals ( as Pb ), )	-
3.2 Table 1 (viii) (Iron ( as F , )	-
3.2 Table 1 (ix) (Arsenic ( as As ), )	-
3.2 Table 1 (x) (Calcium and magnesium ( as Ca ), )	-
3.2 Table 1 (xi) (Potassium ( as K ), )	-
3.2 Table 1 (xii) (Sodium nitrate content ( as NaNO3 ),)	-

-
excluding potassium;

IS 15647 (2006)

Hot rolled steel narrow width strip for welded tubes and pipes

Rs.9900/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 9 (Press)	-
Cl 11 (Workmanship)	-
Cl 12 (Length, Width & Thickness)	-
Cl 13 (Workmanship)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

IS 12981 (1991)

Common salt - Iron fortified - Specification

Rs.6710/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
CL 3.1 (Description )	-
CL 3.2 (Moisture)	-
CL 3.3, Annex A of IS 253 : 1985 (Particle Size)	-
Table 1 (i), Annex A, Annex IS 253 : 1985 A-4 (Water insoluble matter)	-
Table 1 (vii), Annex A-3 (pH of 5 percent aqueous solution)	-
Table 1 (vii), Annex A-4 (Phosphates ( as PO4 ))	-
Table 1 (iii), IS 253 : 1985 A-6 (Matter insoluble in dilute hydrochloric acid.)	-

-
-

IS 4368 (1967)

Specification for alloy steel billets, blooms and slabs for forging for general engineering purposes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (Freedom from Defects)	-
Cl 8 (Diameter, Ovality & Weight)	-
Cl 11 (Hardness & Tensile Test)	-

-
Steel designation as per Table 1 may be delcraed. Sample size having minimum dia > 3mm and thickness > 0.8 mm shall be provided.;

IS 14183 (1994)

Pesticide - Cartap hydrochloride SP - Specification

Rs.3800.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.3 Table 1 iii (pH or 10 percent ( mlm ) extract)	-
3.3 Table 1 ii (Matter insoluble in water )	-

-
-

IS 14184 (1994)

Pesticide - Cartap hydrochloride G - Specification

Rs.2900.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description)	-
3.2.2 (Particle Size)	-
3.2.3 (Dust)	-
3.2.4 (Moisture Content)	-
3.3.2 (pH or 1 percent ( mlm ) extract)	-

-
-

IS 14186 (1994)

Pesticide - Diflubenzuron WP - specification

4390 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.3 Table 1 ii (Sieving requirements material passing through 44 micron IS sieve)	-
3.3 Table 1 v (Wettability)	-
3.3 Table 1 iv (Acidity (as H2SO4))	-
3.3 Table 1 i (Diflubenzuron content )	-
3.3 Table 1 iii (Suspensibility)	-

-
-

IS 14411 (1996)

Deltamethrin F - Specification

Rs.2300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.3 (Deltamethrin Content)	-
3.4 (Dispersibility in -Water)	-
3.5 (Acidity)	-

-
-

IS 15160 (2002)

Pretilachlor emulsifiable concentrate - specification

Rs.2450.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description)	-
3.2.2 (Cold Test)	-
3.2.3 (Flash Point (Abel))	-
3.2.4 (Emulsion Stability)	-
3.3.1 (Pretilachlor content)	-
3.3.2 (Acidity)	-

-
-

IS 14158 (1994)

Cyfluthrin WP - Specification

Rs.5600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.3 Table 1 i (Cyfluthrin content )	-
3.3 Table 1 ii (Sieving requirements material passing through 75 micron IS sieve)	-
3.3 Table 1 iii (Suspensibility)	-
3.3 Table 1 iv (Acidity/Alkalinity)	-
3.3 Table 1 v (Wettability)	-

-
excluding Cl 3.3, Table1, Sl No. I & III Content & Suspensibility;

IS 15219 (2002)

Aluminium phosphide powder formulation

Rs.1550.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.3.1 (Aluminium Phosphide Content)	-

-
-

First
Prev
2
3
4
5
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- sample@bis.gov.in

Scope List