BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- sample@bis.gov.in

Scope List

Reset

180 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

151

IS 3039 (1988)

Specification for structural steel for construction of hulls of ships (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1 & Table 1 (Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

152

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

Rs. 4500/- View breakup
Excluding Macro examination and Sulphur print

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1, Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
"Grade designation to be declared. Microalloying element/type of killing (element)/any other element to be declared. Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; "

153

IS 2569 (1978)

Specification for malathion water dispersible powder concentrates

- View breakup
Rs.6500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-
2.2. Table1.i (Malathion Content)	-
2.2. Table1.ii (Sieving requirement)	-
2.2. Table1.iii (Suspensibility)	-
2.2. Table1.iv (Acidity)	-

-
-

154

IS 2546 (1974)

Specification for galvanized mild steel fire bucket (First Revision)

- View breakup
Rs.4200/- and Material testing charges as per relevant referred Iss

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 2.1,2.2,2.3 (Carbon)	-
Cl. 2.1,2.2,2.3 (Sulphur)	-
Cl. 2.1,2.2,2.3 (Phosphorus)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding Complete for material;

155

IS 3502 (2009)

Steel chequered plates (Third Revision)

- View breakup
Rs. 2985/- and material testing charges as per relevant referred Iss

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.1 (IS-2062, E250A) (CARBON)	-
Cl.4.1 (IS-2062, E250A) (SULPHUR)	-
Cl.4.1 (IS-2062, E250A) (PHOSPHURS)	-
Cl.4.1 (IS-2062, E250A) (MANGANESE)	-
Cl.4.1 (IS-2062, E250A) (SILICON)	-
Cl.4.1 (IS-2062, E250A) (CARBON EQUIVALENT)	-
Cl 5 (Workmanship)	-
Cl 6 (Workmanship)	-
Cl 8 (UTM)	-
Cl 9 (Press)	-
Cl 10 (Length, Width, Thickness & Chequered Height)	-
Cl 10 (Length, Width, Thickness & Chequered Height)	-
Cl. 11 (Weight)	-
Cl. 10 (Thickness)	-
Cl. 10 (Width)	-
Cl.8 (Elongation)	-
Cl.8 (Yield Stress)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

156

IS 2385 (1977)

Specification for hot - Rolled mild steel sheet and strip in coil form for cold - Reduced tinplate and cold - Reduced blackplate (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1, 5.2 & Table1 (Carbon- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-
Cl. 5.1, 5.2 & Table1 (Manganese- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-
Cl. 5.1, 5.2 & Table1 (Sulphur- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-
Cl. 5.1, 5.2 & Table1 (Phosphorus- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-
Cl. 5.1, 5.2 & Table1 (Nitrogen- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-
Cl. 5.1, 5.2 & Table1 (Aluminium- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding all complete for material only;

157

IS 2255 (1977)

Specification for mild steel wire rod for the manufacture of machine screws (By Cold Heading Process) (Second Revision)

Rs. 600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1 (Carbon- Relevant parts of IS 228.)	-
Cl. 5.1 (Manganese- Relevant parts of IS 228.)	-
Cl. 5.1 (Sulphur- Relevant parts of IS 228.)	-
Cl. 5.1 (Phosphorus- Relevant parts of IS 228.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

158

IS 2568 (1978)

Specification for malathion dusting powders

- View breakup
Rs. 3300/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-
2.2. Table1.i (Malathion content)	-
2.2. Table1.ii (High temperature stability after storage for 20 hours at 90°C)	-
2.2. Table1.iii (Material passing through 75-micron IS Sieve)	-
2.2. Table1.iv (Bulk'density after compacting)	-
2.2. Table1.v (Acidity/Alkalinity)	-

-
-

159

IS 1812 (1982)

Specification for carbon steel wire for the manufacture of wood screws (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

160

IS 1673 (1984)

Spectfication for mild steel wire, cold heading quality (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

161

IS 2567 (1978)

Specification for malathion emulsifiable concentrates

Rs.3500.00 (Including cost of CRM) View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.1 (Description)	-
2.2.2 (Cold Test)	-
2.2.3 (Flash Point (Abel))	-
2.2.4 (Emulsion Stability)	-
2.3.1 (Malathion content)	-
2.3.2 (Acidity (as H2SO4), )	-

-
-

162

IS 1029 (1970)

Specification for hot-rolled steel strip (Baling) (First Revision)

Rs.750/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4 (Sulphur -IS 228 or method specified in relevant ISO standard)	-
Cl.4 (Phosphorus -IS 228 or method specified in relevant ISO standard)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

163

IS 1726 (1991)

Cast iron manhole covers and frames - Specification (Third Revision)

Rs 3225.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1.1 (Covers and Frames)	-
5.1.2 (The rise of the chequer)	-
5.2 and Fig.1 (Key Holes and Keys)	-
6 and Table 1 (PERFORMANCE REQUIREMENTS - Clear opening of frame O X O1)	-
6 and Table 1 (PERFORMANCE REQUIREMENTS - fd)	-
6 and Table 1 (PERFORMANCE REQUIREMENTS - S)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - O)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - O1)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - F)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - F1)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - f)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - f1)	-
8 (COATING - At 63˚C)	-
8 (COATING - At 0˚C)	-
10 and Table 3 (LOAD TEST)	-

-
Since the composition of cast iron shall be left to the discretion ofthe manufacturer , as such element to be tested with specified requirement and tolerances if any may please be declared with method of testing. Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm.;

164

IS 14542 (1998)

Partly skimmed milk powder specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6.6.1 (Bacterial Count (IS 5402))	-
Cl 6.6.2 (Coliform Count ((IS 5402))	-

-
-

165

IS 1488 (1989)

Pesticides - 2, 4 - D sodium salt, technical - Specification

Technical

- View breakup
Hence complete testing charges for the product are Rs.4800.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2.3 & 7.1 Table i (Acid content. ( calculated as 2, 4-dichlorophenoxy acetic acid. 2, 4.D))	-
3.2.3 & 7.1 Table ii (Water insoluble matter)	-
3.2.3 & 7.1 Table v (Loss on drying at 105°C)	-

-
-

166

IS 2404 (1993)

Malt extract - Specification (Second Revision)

Rs 6600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 2 (i) IS 5402:1969 (Total bacterial count)	-
Table 2 (ii)IS no 5401 (Coliform bacteria)	-
Table 2 (iii) IS no 5403 ( Yeast count, per g)	-
Table 2 (iv) IS 5403 (Mould count, per g,)	-

-
-

167

IS 1251 (1988)

Specification for zinc phosphide, technical

Technical

Rs.2300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-
2.3 (Freedom from sulphides)	-
2.2 Table 2 i (Zinc Phosphide (Zn3P2))	-
2.2 Table 2 ii (Zinc Content)	-
2.2 Table 2 iii (Sieving Requirements: Material passing through 150 micron IS Sieve)	-
2.2 Table 2 iv (Sieving Requirements: Material passing through 106 micron IS Sieve)	-

-
-

168

IS 261 (1982)

Specification for copper sulphate (Second Revision)

- View breakup
Rs 2400/- for Tech., Rs 3900/- for Pure

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
1(i) Table 1 (Copper, Tech, A-2)	-
1(i) Table 1 (Copper, Pure, A-2)	-
1(ii) Table 1 (Matter insoluble in water, Tech, A-3)	-
1(ii) Table 1 (Matter insoluble in water, Pure, A-3)	-
1(iii) Table 1 (Soluble iron and aluminium compounds ( as Fe ), Pure, A-4)	-
1(iv) Table 1 (pH value, Tech, A-5)	-
1(iv) Table 1 (pH value, Pure, A-5)	-
1(v) Table 1 (Chloride ( as Cl ), Tech, A-6)	-
1(v) Table 1 (Chloride ( as Cl ), Pure, A-6)	-
1(vi) Table 1 (Arsenic ( as As2O3 ), Tech, A-7)	-
1(vi) Table 1 (Arsenic ( as As2O3 ), Pure, A-7)	-
1(vii) Table 1 (Lead and zinc, Tech, A-8)	-
1(vii) Table 1 (Lead and zinc, Pure, A-8)	-
Cl 3.1 (Description, Tech and Pure)	-

-
Facility is complete for this IS; Excluding NA

169

IS 738 (1994)

Wrought aluminium alloys, drawn tube for general engineering purposes - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 8.1, Table 1 (Aluminium- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-
Cl. 8.1, Table 1 (Copper- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-
Cl. 8.1, Table 1 (Silicon- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-
Cl. 8.1, Table 1 (Zinc- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-
Cl. 8.1, Table 1 (Iron- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-

-
Grade as per Table 1 IS 738 may please declared. Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

170

IS 278 (2009)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 Table-1 (Sizes Diameter of Line wire)	-
5 Table-1 (Sizes Diamater of Point wire)	-
5 Table-1 (Sizes Mass of Completed barbed wire)	-
5 Table-1 (Sizes Distance between two barbs)	-
5 Table-1 (Sizes No. of Lays between the two consequtive barbs)	-
7.1 (Manufacture)	-
7.2 (Manufacture)	-
9.1 (Freedom from defects)	-
12.1 (Tensile Strength)	-
12.1 (Breaking load)	-
12.2.1 (Mass of zinc coating (line wire))	-
12.2.2 (Mass of zinc coating (point wire))	-
12.2 (Uniformity of zinc coating)	-
12.3 (Ductility)	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M) (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M) (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M) (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M) (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M) (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Grade of the material and type of killing as per IS 7887 may please be declared.;

171

IS 276 (2000)

Austenitic - Manganese steel castings - Specification (First Revision)

- View breakup
Rs 7160/- excluding optional test For low alloys: Rs 1060/- per element

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.1,8.3, Table 1 (C)	-
8.1,8.3, Table 1 (Si)	-
8.1,8.3, Table 1 (Mn)	-
8.1,8.3, Table 1 (p)	-
8.1,8.3, Table 1 (S)	-
8.1,8.3, Table 1 (Cr)	-
8.1,8.3, Table 1 (Mo)	-
8.1,8.3, Table 1 (Ni)	-

-
-

172

IS 208 (1996)

Door Handles - Specification ( Sixth Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 -Table 1- i (Ref. Cl 7.1 -Table 3 Grade 0 of IS 1079 : 2017) (Chemical composition - Carbon - IS 228)	-
4.2 -Table 1- iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983) (Chemical composition - Copper plus incidental nickel - IS 3685:1966)	-
4.2 -Table 1- iv (Ref. Cl 5.1, Table 1 Grade 5230 or 4600 of IS 617 : 1994) (Chemical composition - Copper - IS 504:1963, IS 7658:1975, IS 11035:1984)	-
4.2 -Table 1- v (Ref. Cl 6, Table 1 Grade 19000 of IS 737 : 2008) (Chemical composition - Aluminium - IS 504:1963)	-
4.2 -Table 1- vi (Ref. Cl 5.1, Table 1 Grade 63400 or 65032 of IS 733 : 1983) (Chemical composition - Aluminium - IS 504:1963)	-
4.2 -Table 1- vii (Ref. Cl 6.1 of IS 210 : 2009) (Chemical composition - Sulphur and/or Phosphorous)	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981) (Chemical composition - Aluminium- IS 2600:1964)	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981) (Chemical composition - Impurities-Nickel- IS 2600:1964)	-
3 (TYPES-Doors handle shall be of the following types according to the materials used:)	-
5.1 (MANUFACTURE- General)	-
6.1 Table2A & 2B and Fig 1,2,3,4 (DIMENSIONS - Size (A,B,C,D,E,F,G,H,I))	-
6.1 Table2A & 2B and Fig 1,2,3,4 (DIMENSIONS - Size 1. No. in each Lug 2. No. in a plate when a continious plate is used 3. Size Designation of Counter-sunk Head Wood Screws (as per IS 6760: 1972))	-

-
Test facility is available for material test only as per Table 1. Sample dia > 3mm or thickness > 0.8 mm can only be tested, Sample size 5 pcs 5x5 cm; Excluding All except Coating Test;

173

IS 205 (1992)

Non - Ferrous metal butt specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1- Table 2,3,4,5 & Fig-1 & 2 (Dimensions- Type of Hinge 1.Length 2.Breadth 3.Butt Dia 4.Pin Dia 5.Thickness of Flap)	-
5.1- Table 2,3,4,5 & Fig-1 & 2 (Dimensions- 1. Holes for Screw Desination 2. No. of screw Holes)	-
6.1 (Manufacture- General)	-
6.2- Table 2,3,4,5 (Kunckles)	-
6.3 (Screw Holes)	-
6.3.1- Table 2,3,4,5 & Fig-1 & 2 (Screw Holes)	-
6.3.2- Table 2,3,4,5 (Number of Holes)	-
6.3.3 Fig-1 (Position of Holes)	-
4.1 -Table 1-Flap- i (Ref. Cl 5.1, Table 1 Designation 64430 or 65032 of IS 733 : 1983) (Chemical composition - Aluminium - IS 504)	-
4 -Table 1- Flap-ii (Ref. Cl 8.1, Table 1 of IS 319 : 1989) (Chemical composition - Copper - IS 3685:1966)	-
4 -Table 1- Flap-iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983) (Chemical composition - Copper plus incidental nickel - IS 3685:1966)	-
4 -Table 1- Flap-iv (Ref. Cl 6.1 , Table 1 Designation CuZn40 of IS 410 : 1977) (Chemical composition - Copper - IS 3635:1966)	-
4.1 -Table 1-Pin- i (Ref. Cl 5.1, Table 1 Designation 64430 of IS 733 : 1983) (Chemical composition - Aluminium - IS 504)	-
4.1 -Table 1-Pin- ii (Ref. Cl 6.1, Table 1 of IS 7608 : 1987) (Chemical composition - Tin - IS 4027:1967)	-
4.1 -Table 1-Pin- iii (Ref. Cl 6 of IS 280:1978- Cross ref. Cl. 6.1 -Table 1 of IS 7887 : 1992) (Chemical composition - Carbon - IS 228)	-
4.1 -Table 1-Pin- iv (Ref. Cl 4.1 -Table 1 of IS 4413 : 1981) (Chemical composition - Copper - IS 3685:1966)	-
4.1 -Table 1-Pin- v (Ref. Cl 7.1 -Table 1 of IS 6528 : 1995) (Chemical composition - Carbon - IS 228)	-

-
Grade/Designation of material of componenets as per Table 1 may please be declared. Sample dia > 3mm or thickness > 0.8 mm can only be tested;

174

IS 8931 (1993)

copper alloy fancy single taps, combination tap assembly and stop valves for water services

Rs 3600/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3 (TERMINOLOGY)	-
Cl 4 (NOMINAL SIZES)	-
Cl 6.6 (Screw Threads)	-
Cl 6.7 (Waterway)	-
Cl 6.9 (Body Seat)	-
Cl 6.10 (Bonnet assembly)	-
Cl 6.11 (Gland Packaging)	-
Cl 6.12 (Flanges)	-
Cl 6.13 (Knob)	-
Cl 7.1 (Thickness)	-
Cl 7.2 (Body)	-
Cl 7.3 (Bonnet Assembly)	-
Cl 7.3.3 (Washer Plate)	-
Cl 9.2.1 (Water Tightness Characteristic)	-
Cl 9.2.2 (Pressure Resistance Characteristic)	-
Cl 9.2.3 (Hydraulic characteristic (Flow rate))	-
Cl 9.2.4 (Mechanical strength characteristic)	-
Cl 7.2 (Body)	-
Cl 7.3 (Bonnet Assembly)	-
Cl 7.3.3 (Washer Plate)	-
Cl 9.2.1 (Water Tightness Characteristic)	-
Cl 9.2.2 (Pressure Resistance Characteristic)	-
Cl 9.2.3 (Hydraulic characteristic (Flow rate))	-
Cl 9.2.4 (Mechanical strength characteristic)	-
Clause 5.1, Table -1 (Cast Brass LCB-2 of IS 292 1983,Ingots, Cu + Ni)	-
Clause 5.1, Table -1 (Cast Brass Grade DCB - 2 of IS 1264 : 1981, Die Casting, Cu)	-
Clause 5.1, Table -1 (Leaded In Tin Bronze ,LTB-2 of IS 318, Sn)	-
Clause 5.1, Table -1 (Brass, Tyape 1 half Hard of IS 319 : 2007, Grade -1 , Cu)	-
Clause 5.1, Table -1 (Grade FIB of IS 6912 : 2005, Cu)	-
Clause 5.1, Table -1 (Brass Rods Grade- CuZn 37 of IS 410 : 1977, Cu)	-
Clause 5.1, Table -1 (Stainless Steel Grade- X04Cr17Ni12Mo2 of IS 4454(Pt-4) : 1975, C)	-
Clause 5.1, Table -1 (Zinc base Alloys Grade- Zn Al 4 of IS 742 : 1981, Al)	-
Clause 5.1, Table -1 (Cast Brass LCB-2 of IS 292 1983,Ingots, Cu + Ni)	-

-
Grade/Designation of material of componenets as per Table 1 may please be declared. Sample dia > 3mm or thickness > 0.8 mm can only be tested;

175

IS 204 : Part 2 (1992)

Tower bolts - Specification: Part 2 non - Ferrous metals (Fifth Revision)

Rs.2100.00. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 -Table 3- i (Ref. Cl 8, Table 1 Designation 63400 of IS 1285 : 2002) (Chemical composition - Aluminium - IS 504)	-
4 -Table 3- ii (Ref. Cl 5.1, Table 1 Designation 65032 of IS 733 : 1983) (Chemical composition - Aluminium - IS 504)	-
4 -Table 3- iii (Ref. Cl 6.1 , Table 1 Designation CuZn40 of IS 410 : 1977) (Chemical composition - Copper - IS 3635:1966)	-
4 -Table 3- iv (Ref. Cl 3.1, Table 1 Grade CB-2 of IS 292 : 1983) (Chemical composition - Nickel - IS 3685:1966)	-
4 -Table 3- v (Ref. Cl 8.1, Table 1 Grade II of IS 319 : 1974) (Chemical composition - Copper - IS 3685:1966)	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981) (Chemical composition - Aluminium- IS 2600:1964)	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981) (Chemical composition - Zinc- IS 2600:1964)	-
5.2.1 Table 1 (Particulars-Barrel Tower Bolts)	-
5.2.2 Table 2 (Particulars-Skeleton Tower Bolts)	-
6.1- Table 1 (Dimension of Barrel tower bolts-1.Size 2.Length of Bolt or Barrel-(A or B) 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Metal of Barrel (Brass or Zink Alloy/Aluminium alloy/Sheet Brass)-F 8.Dia of bore of barrel or socket- G )	-
6.1- Table 1 (Dimension of barrel tower bolts-Minimum No. of equally Spaced holes in Barrel & Socket for wooden screw no 6)	-
6.2- Table 2 (Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt -A 3.Length of Bolt Plate -B 4.Width of Bolt Plate or Staple-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Socket (Brass /Aluminium alloy or Zink Alloy)-F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob )	-
6.2- Table 2 (Dimension of Skeleton Tower Bolts- Nos of Staples)	-
6.2- Table 2 (Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 4)	-

-
Grade/Designation, Quality type of killing and declaration regarding micro alloying elements addition may please be declared as per relevant IS of Table 3 of IS 204(P-2). Sample size- 5 pcs of 5 cm x 5 cm having dia> 3mm and thickness >0.8 mm;

176

IS 204 : Part 1 (1991)

Tower bolts - Specification: Part 1 ferrous metals (Fifth Revision)

Rs.2100.00. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017) (Chemical composition - Carbon - IS 228)	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017) (Chemical composition - Manganese - IS 228)	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017) (Chemical composition - Phosphorus - IS 228)	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017) (Chemical composition - Sulphur - IS 228)	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011) (Chemical composition - Carbon - IS 228)	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011) (Chemical composition - Manganese - IS 228)	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011) (Chemical composition - Phosphorus - IS 228)	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011) (Chemical composition - Silicon - IS 228)	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011) (Chemical composition - Carbon Equivalen(CE) - IS 228)	-
4 -Table 5- iii (Ref. Cl 6.1 of IS 210 : 2009) (Chemical composition - Sulphur and/or Phosphorous)	-
5.2.1 Table 1 (Particulars-Barrel Tower Bolts)	-
5.2.2 Table 2 (Particulars-Sami Barrel Tower Bolts)	-
5.2.3 Table 3 (Particulars-Riveted or Spot Welded Tower Bolts)	-
5.2.4 Table 4 (Particulars-Skeleton Tower Bolts)	-
6.1- Table 1 (Dimension of Barrel tower bolts-1.Size 2.Length of Bolt-A 3.Length of Barrel-B 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of mild steel sheet for barrel-F 8.Dia of bore of barrel or socket- G )	-
6.1- Table 1 (Dimension of Barrel tower bolts-Minimum No. of equally Spaced Screw holes in Barrel and Socket for wood screw no 6)	-
6.2- Table 2 (Dimension of Sami Barrel Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Bolt Plate or Socket-F 8.Dia of bore of Bolt Plate or socket G )	-
6.2- Table 2 (Dimension of Sami Barrel Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-
6.3- Table 3 (Dimension of Riveted or Spot Welded Tower Bolts- 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7. Length of Strap-E" 8.Thickness of Back Plate -F 9.Thickness of Socket or Upper Plate and Strap- F" 10.Dia of bore of Bolt Plate or socket- G 11. Length of Alternative Socket-H )	-
6.3- Table 3 (Dimension of Riveted or Spot Welded Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-
6.4- Table 4 (Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Staple -F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob-J)	-
6.4- Table 4 (Dimension of Skeleton Tower Bolts- Nos of Staples)	-
9 (PACKING)	-

-
Grade/Designation, Quality type of killing and declaration regarding micro alloying elements addition may please be declared as per relevant IS of Table 5 of IS 204(P-1). Sample size- 5 pcs of 5 cm x 5 cm having dia> 3mm and thickness >0.8 mm;

177

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 9 (Press)	-
Cl 10 (Die Press)	-
Cl 12 (Workmanship)	-
Cl 13 (Length, Width & Thickness)	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 ( Copper %)	-
6.1 ( Aluminium %)	-
6.1 ( Nitrogen%)	-
6.1 ( Nb)	-
6.1 (V)	-
6.1 ( Ti)	-
6.1 (Cr)	-
6.1 (Mo)	-
6.1 (Ni)	-
6.1 (Silicon %)	-

-
Grade/Designation, Quality type of killing and declaration regarding micro alloying elements addition may please be declared. Sample size- 5 pcs of 5 cm x 5 cm having dia> 3mm and thickness >0.8 mm;

178

IS 3854 (1997)

Switches for domestic and similar purposes - Specification (Second Revision)

- View breakup
6A Screw type terminals-Rs.4900/-, 6A Screwless type terminals-Rs.5850/-,10A Screw type terminals-Rs.5050/-, 10A Screwless type terminals-Rs.6400/-, 16A Screw type terminals-Rs.5850/-,16A Screwless type terminals-Rs.7900/-, 20A-Rs.5250/-, 25A-Rs.5900/-, 32A-Rs.6250/-, 40A-Rs.6550/-, 63A-Rs.6200/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Rating)	-
7 (Classification)	-
7 (Classification)	-
7 (Classification)	-
7 (Classification)	-
7 (Classification)	-
7 (Classification)	-
7 (Classification)	-
8 (Marking)	-
8 (Marking)	-
8 (Marking)	-
8 (Marking)	-
8 (Marking)	-
8 (Marking)	-
8 (Marking)	-
8.9 (Marking)	-
6 (Rating)	-
10 (Protection against Electric Shock)	-
11.1 (Provision for earthing)	-
12 (Terminals)	-
12.2.1 (Terminals)	-
12.2.2 (Connection of conductor)	-
12.2.3 (Mechanical strength of terminals)	-
12.2.4 (Resistance to corrosion)	-
12.2.5 (Undue damage to conductor)	-
12.2.7 (Insertion of conductor)	-
12.2.9 (Locking against accidental loosening)	-
12.2.11 (Distance between screw and conductor)	-
12.3.2 (Screwless terminals)	-
12.3.3 (Connectin of conductor)	-
12.3.4 (Material of terminals)	-
12.3.5 (Clamping)	-
12.3.7 (v) Interconnection of conductors [Cl. 12.3.7])	-
12.3.11 (vi) Electrical & Thermal Stresses [Cl 12.3.11])	-
12.3.12 (vii) Deflection Stresses [Cl. 12.3.12])	-
13.1 (a) Insulating lining, barriers and the like [Cl 13.1])	-
13.2 (b) Construction of switch [Cl 13.2])	-
13.2 (i) Installation Test)	-
13.3 (c) Covers,cover plates and actuating members [Cl 13.3])	-
13.4 (d) Ordinary switches [Cl 13.4])	-
13.5 (e) Rotary switches [Cl 13.5])	-
13.6 (f) Screws and other means [Cl 13.6])	-
13.7 (g) Combination of switches or switches and socket outlets [Cl 13.7])	-
13.8 (h) Assessories combined with switches [Cl. 13.8])	-
13.9 (j) Switches other than ordinary switches [Cl. 13.9])	-
13.1 (k) Switches to be installed in a box [Cl. 13.10])	-
13.11 (l) Surface type switches other than ordinary switch [Cl. 13.11])	-
13.12, 13.13, 13.14 (m) Inlet opening [Cl. 13.12.13.13 & 13.14])	-
13.15 (q) Requirements for membrane in inlet opening [ Cl. 13.15])	-
13.15 (q) Requirements for membrane in inlet opening [ Cl. 13.15])	-
13.15 (q) Requirements for membrane in inlet opening [ Cl. 13.15])	-
13.15 (q) Requirements for membrane in inlet opening [ Cl. 13.15])	-
14 (Mechanism [Cl. 14])	-
15.1 (Resistance to Ageing, to Harmful Ingress of water and to Humidity [Cl. 15]: Resistance to Ageing, [Cl. 15.1])	-
15.2 (b)Resistance to Harmful ingress of water [Cl. 15.2])	-
15.3 (c) Resistance to Humidity [Cl. 15.3])	-
16.1 (Insulation resistance [Cl. 16.1])	-
16.2 ( Electric Strength [Cl. 16.2])	-
17 (Temperature- rise [Cl. 17])	-
18 (Marking and breaking Capacity[Cl. 18])	-
19 (Normal Operation [Cl. 19] a) General & Operation)	-
19 (b) Electric Strength)	-
19 (c)Temperature-rise )	-
14.3 (d)Test for arcing and sparking [Cl 14.3])	-
19.2 (Normal Operation (For AX type Switches) [Cl. 19.2])	-
20 (Mechanical Strength Test [Cl. 20])	-
21 (Resistance to Heat [Cl.21])	-
22 (Screw, Current Carrying Part And Connection [Cl.22])	-
22.1 (i) Screw & Nuts [Cl.22.1])	-
22.4 (ii) Screw & rivets [Cl . 22.4])	-
22.5 (iv) Current carrying part [Cl.22.5])	-
23.2 (Creepage distances, clearances and distance through sealing compound [Cl.23])	-
24.1.1 (Resistance to Abnormal Heat & Fire [Cl.24.1] [Glow Wire Test] [Cl.24.1.1])	-
24.2 (Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-
6 (Rating)	-
7 (Classification)	-
21 (Resistance to Heat [Cl.21])	-
21 (Resistance to Heat [Cl.21])	-
23.2 (Creepage distances, clearances and distance through sealing compound [Cl.23])	-
22.3 (iii) Electrical Connections [Cl.22.3])	-
25 of IS 3854 : 1997 (Resistance to rusting)	-
8 (Marking)	-

-
-

179

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Ratings)	-
6 (Ratings)	-
6 (Ratings)	-
7.1.1 (Accessories Classification)	-
7.1.2 (Accessories Classification)	-
7.1.3 (Accessories Classification)	-
7.1.4 (Accessories Classification)	-
7.2.1 (Socket-Outlets Classification)	-
7.2.2 (Socket-Outlets Classification)	-
7.2.3 (Socket-Outlets Classification)	-
7.2.4 (Socket-Outlets Classification)	-
7.3 (Plug Classification)	-
8.1 (MARKING)	-
8.8 (MARKING)	-
8.9 (MARKING)	-
9.1 (CHECKING OF DIMENSIONS)	-
9.2 (CHECKING OF DIMENSIONS)	-
10.1 (PROTECTION AGAINST ELECTRIC SHOCK)	-
10.1 (PROTECTION AGAINST ELECTRIC SHOCK)	-
10.4 (PROTECTION AGAINST ELECTRIC SHOCK)	-
10.5 (PROTECTION AGAINST ELECTRIC SHOCK)	-
10.6 (PROTECTION AGAINST ELECTRIC SHOCK)	-
10.7 (PROTECTION AGAINST ELECTRIC SHOCK)	-
11.1 (PROVISIONS FOR EARTHING)	-
11.2 (PROVISIONS FOR EARTHING)	-
11.3 (PROVISIONS FOR EARTHING)	-
11.4 (PROVISIONS FOR EARTHING)	-
11.5 (PROVISIONS FOR EARTHING)	-
11.6 (PROVISIONS FOR EARTHING)	-
12.1.1 (TERMINALS)	-
12.1.2 (TERMINALS)	-
12.2.1 (TERMINALS)	-
12.2.2 (TERMINALS)	-
12.2.3 (TERMINALS)	-
12.2.4 (TERMINALS)	-
12.2.5 (TERMINALS)	-
12.2.6 (TERMINALS)	-
12.2.7 (TERMINALS)	-
12.2.8 (TERMINALS)	-
12.2.9 (TERMINALS)	-
12.2.10 (TERMINALS)	-
12.2.11 (TERMINALS)	-
12.3.1 (TERMINALS)	-
12.3.2 (TERMINALS)	-
12.3.3 (TERMINALS)	-
12.3.4 (TERMINALS)	-
12.3.5 (TERMINALS)	-
12.3.6 (TERMINALS)	-
12.3.7 (TERMINALS)	-
12.3.8 (TERMINALS)	-
12.3.9 (TERMINALS)	-
12.3.10 (TERMINALS)	-
12.3.11 (TERMINALS)	-
12.3.12 (TERMINALS)	-
13.1 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.2 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.3 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.4 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.5 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.6 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.7 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.8 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.9 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.1 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.11 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.12 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.13 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.14 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.15 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.16 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.17 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.18 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.19 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.2 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.21 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.22 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
13.23 (CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-
14.1 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.2 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.3 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.4 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.5 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.6 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.7 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.8 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.9 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.1 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.11 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.12 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.13 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.14 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.15 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.16 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.17 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.18 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.19 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.2 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.21 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.22 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.23 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.23.1 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.23.2 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.24 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.25 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
14.26 (CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-
15 (INTERLOCKED SOCKET-OUTLETS)	-
16.1 (RESISTANCE TO AGEING,)	-
16.2 (RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-
16.3 (Resistance to Humidity)	-
17.1 (INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
17.2 (INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
19 (TEMPERATURE RISE)	-
20 (BREAKING CAPACITY)	-
21 (NORMAL OPERATION)	-
21 (NORMAL OPERATION)	-
21 (NORMAL OPERATION)	-
22.1 (Verification of the Maximum Withdrawal Force)	-
22.2 (Verification of Minimum Withdrawal Force)	-
23.1 (FLEXIBLE CABLES AND THEIR CONNECTION)	-
23.3 (FLEXIBLE CABLES AND THEIR CONNECTION)	-
23.4 (FLEXIBLE CABLES AND THEIR CONNECTION)	-
24.1 (MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-
24.1 (MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-
24.1 (MECHANICAL STRENGTH For surface mounting boxes)	-
24.2 (MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-
24.2 (MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-
24.2 (MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies other than elastomeric or thermoplastic material)	-
24.2 (MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-
24.3 (MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-
24.4 (MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-
24.4 (MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-
24.4 (MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-
24.5 (MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-
24.5 (MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-
24.5 (MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-
24.6 (MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-
24.7 (MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-
24.8 (MECHANICAL STRENGTH For shuttered socket-outlets)	-
24.9 (MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-
24.1 (MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-
24.11 (MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-
24.12 (MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-
24.13 (MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-
24.14.1 (MECHANICAL STRENGTH For fixed socket-outlets)	-
24.14.2 (MECHANICAL STRENGTH For fixed socket-outlets)	-
25.1 (RESISTANCE TO HEAT Accessories and surface mounting boxes)	-
25.2 (RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-
25.3 (RESISTANCE TO HEAT Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them)	-
25.4 (RESISTANCE TO HEAT )	-
26.1 (SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-
27.1 (CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-
27.2 (CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-
27.3 (CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-
28.1.1 (Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-
28.1.2 (Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-
28.2 (Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-
29 (RESISTANCE TO RUSTING)	-
30.1 (ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-
30.2 (ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-
30.3 (ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-
30.4 (ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-
7.1.5 (Accessories Classification)	-
8.1 (MARKING)	-
10.1 (PROTECTION AGAINST ELECTRIC SHOCK)	-
23.2 (FLEXIBLE CABLES AND THEIR CONNECTION)	-

-
-

180

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

Rs 4000/- /BWR Grade, Rs.4900/- for MR Grade View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Classification by appearance)	-
Cl-11.6 (Formaldehyde Content Test)	-

-
Facility not available: Static bending strength above 15 mm thickness. ; Excluding- Steady State Formaldehyde Emission Test (Cl. 11.7)

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- sample@bis.gov.in

Scope List