BIS - LIMS (Laboratory Information Management System)

VIRIDIAN TESTING LABORATORIES LLP, TIRUPUR

8/3176-A5, Jothipuram, 2nd Street,, PN Road, Pandiyan Nagar,, Tirupur- 641602. Tamilnadu., Tiruppur, Tamil Nadu, 641602

9865698286 venkatesh@viridianlab.com

Scope List

Reset

8 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 17334 (2025)

Textiles - Medical/Surgical Gowns and Medical/Surgical Drapes - Specification (First Revision)

62600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Workmanship and Finish)	-	0	-
Cl-5.1, 6.2 Table-1 (i)(Impact penetration (g))	-	2000	-
Cl-5.1, 6.2 Table-1 (ii)(Hydrostatic resistance (cmwc), the rate of rising at 60 cmwc/min)	-	2000	-
Cl-5.1, 6.2 Table-1 (iii)(Blood penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	6000	-
Cl-5.1, 6.2 Table-1 (iv)(Viral penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	15000	-
Cl-5.1, 6.2 Table-1 (vi)(Tensile strength (dry and wet) (N))	-	2000	-
Cl-5.1, 6.2 Table-1 (vii)(Bursting strength (dry and wet) (kPa))	-	2000	-
Cl-5.1, 6.2 Table-1 (viii)(Cleanliness-microbial (CFU/100 cm2))	-	3600	-
Cl-5.1, 6.2 Table-1 (ix)(Resistance to microbial penetration — Dry (CFU))	-	15000	-
Cl-5.1, 6.2 Table-1 (x)(Resistance to microbial penetration — Wet (IB))	-	15000	-
Cl-5.1, 6.2 Table-2 (i)(Impact penetration (g))	-	0	-
Cl-5.1, 6.2 Table-2 (ii)(Hydrostatic resistance (cmwc), the rate of rising at 60 cmwc/min)	-	0	-
Cl-5.1, 6.2 Table-2 (iii)(Blood penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	0	-
Cl-5.1, 6.2 Table-2 (v)(Tensile strength (dry and wet) (N))	-	0	-
Cl-5.1, 6.2 Table-2 (vi)(Bursting strength (dry and wet) (kPa))	-	0	-
Cl-5.1, 6.2 Table-2 (vii)(Cleanliness-microbial (CFU/100 cm2))	-	0	-
Cl-5.3(Barrier Properties)	-	0	-
Cl-7(Marking)	-	0	-
Cl-5.1, 6.2 Table-2 (viii)(Resistance to microbial penetration — Dry (CFU))	-	0	-
Cl-5.1, 6.2 Table-2 (ix)(Resistance to microbial penetration — Wet (IB))	-	0	-
Cl-4(Workmanship and Finish)	-	0	-
Cl-5.1, 6.2 Table-1 (i)(Impact penetration (g))	-	0	-
Cl-5.1, 6.2 Table-1 (ii)(Hydrostatic resistance (cmwc), the rate of rising at 60 cmwc/min)	-	0	-
Cl-5.1, 6.2 Table-1 (iii)(Blood penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	0	-
Cl-5.1, 6.2 Table-1 (iv)(Viral penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	0	-
Cl-5.1, 6.2 Table-1 (vi)(Tensile strength (dry and wet) (N))	-	0	-
Cl-5.1, 6.2 Table-1 (vii)(Bursting strength (dry and wet) (kPa))	-	0	-
Cl-5.1, 6.2 Table-1 (viii)(Cleanliness-microbial (CFU/100 cm2))	-	0	-
Cl-5.1, 6.2 Table-1 (ix)(Resistance to microbial penetration — Dry (CFU))	-	0	-
Cl-5.1, 6.2 Table-1 (x)(Resistance to microbial penetration — Wet (IB))	-	0	-
Cl-5.1, 6.2 Table-2 (i)(Impact penetration (g))	-	0	-
Cl-5.1, 6.2 Table-2 (ii)(Hydrostatic resistance (cmwc), the rate of rising at 60 cmwc/min)	-	0	-
Cl-5.1, 6.2 Table-2 (iii)(Blood penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	0	-
Cl-5.1, 6.2 Table-2 (v)(Tensile strength (dry and wet) (N))	-	0	-
Cl-5.1, 6.2 Table-2 (vi)(Bursting strength (dry and wet) (kPa))	-	0	-
Cl-5.1, 6.2 Table-2 (vii)(Cleanliness-microbial (CFU/100 cm2))	-	0	-
Cl-5.3(Barrier Properties)	-	0	-
Cl-7(Marking)	-	0	-
Cl-5.1, 6.2 Table-2 (viii)(Resistance to microbial penetration — Dry (CFU))	-	0	-
Cl-5.1, 6.2 Table-2 (ix)(Resistance to microbial penetration — Wet (IB))	-	0	-

20 Feb, 2028

-
Included w.e.f. 04.08.2025 Exclusion: Cl-5.1, 6.2 Table-1 (v) (Particle release), (xii) ("Breathability test (water vapour transmission rate), [g/m2/day, Max]"), (xi) (1) ("Biocompatibility evaluation test - Cytotoxicity"), (xi) (2) ("Biocompatibility evaluation test - Irritation"), (3) ("Biocompatibility evaluation test - Skin sensitization"), Cl-5.1, 6.2 Table-2 (iv) (Particle release), (x) (1) ("Biocompatibility evaluation test - Cytotoxicity"), (2) ("Biocompatibility evaluation test - Irritation"), Cl-5.1, 6.2 Table-2 (x) (3) ("Biocompatibility evaluation test - Skin sensitization")

IS 17334 (2019)

Medical textiles – Surgical gowns and surgical drapes – Specification

62600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1, Table 1 (i.)(Impact penetration)	-	2000	.
7.1 Table 1 (ii.)(Hydrostatic resistance (cmwc))	-	2000	.
7.1 Table 1 (iii.)(Blood resistance)	-	6000	.
7.1 Table 1 (iv.)(Viral resistance)	-	15000	.
7.1 Table 1 (vi.)(tensile strength (dry and wet) (N))	-	2000	.
7.1 Table 1 (vii.)(bursting strength (dry and wet) (kPa))	-	2000	.
7.1 Table 1 (ix.)(Resistance to microbial penetration — Dry (CFU))	-	15000	.
7.1 Table 1 (x.)(Resistance to microbial penetration — Wet (IB))	-	15000	.
7.1 Table 1 (viii.)(Cleanliness–microbial (CFU/100 cm2))	-	3600	-
7.1 Table 1 (viii.)(Cleanliness–microbial (CFU/100 cm2))	-	0	-
7.1 Table 1 (viii.)(Cleanliness–microbial (CFU/100 cm2))	-	0	-
Cl-5.1, Table-2 (vii)(Cleanliness — Microbial (CFU/100 cm2 ))	-	0	-

20 Feb, 2028

-
-

IS 17786 (2022)

Medical Textiles Underpad Specification

6850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5, Table 1(Dimensions of underpad, mm)	-	500	-
Clause 6(WORKMANSHIP AND FINISH)	-	500	-
Clause 8.1(PH Value)	-	250	-
Clause 8.2, Table 2, (i)(Minimum absorption capacity (ml))	-	500	-
Clause 8.2, Table 2, (ii)(Absorption Time, s/ml, Max)	-	500	-
Clause 8.2, Table 2, (iii)(Retention Capacity #, Min)	-	500	-
Clause 8.3.1(Bacterial and Fungal Bioburden)	-	3600	-
Clause 8.3.2(Test for Common Skin Pathogen - Staphylococcus Aureus)	-	500	-
Clause 8.3.3(" Good Manufacturing Practice Guideline for Hygiene Requirement")	-	0	-
Clause 5, Table 1(Dimensions of underpad, mm)	-	0	-
Clause 6(WORKMANSHIP AND FINISH)	-	0	-
Clause 8.1(PH Value)	-	0	-
Clause 8.2, Table 2, (i)(Minimum absorption capacity (ml))	-	0	-
Clause 8.2, Table 2, (ii)(Absorption Time, s/ml, Max)	-	0	-
Clause 8.2, Table 2, (iii)(Retention Capacity #, Min)	-	0	-
Clause 8.3.1(Bacterial and Fungal Bioburden)	-	0	-
Clause 8.3.2(Test for Common Skin Pathogen - Staphylococcus Aureus)	-	0	-
Clause 8.3.3(" Good Manufacturing Practice Guideline for Hygiene Requirement")	-	0	-

20 Feb, 2028

-
-

IS 17630 (2021)

Medical Textiles Bedsheet and Pillow Cover Specification

8550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(WORKMANSHIP AND FINISH)	-	500	-
6(GENERAL REQUIREMENTS - Fabric Washing & Tumble Drying)	-	0	-
6- Table 1- i)(GENERAL REQUIREMENTS - Colour fastness to rubbing a) Dry 4 or better b) Wet)	-	200	-
6- Table 1- ii)(GENERAL REQUIREMENTS - Colour fastness to perspiration (acidic and alkaline) a) Colour change b) Staining)	-	300	-
6- Table 1- iii)(GENERAL REQUIREMENTS - Colour fastness to washing a) Colour change b) Staining)	-	200	-
6- Table 1- v)(GENERAL REQUIREMENTS - Dimensional stability to washing, percentage Length and width)	-	500	-
7.1- Table 2- i)(PERFORMANCE REQUIREMENTS - Tensile strength (dry and wet) (N))	-	500	-
7.1- Table 2- ii)(PERFORMANCE REQUIREMENTS - Bursting strength (dry and wet) (kPa))	-	500	-
7.1- Table 2- iii)(PERFORMANCE REQUIREMENTS - Seam strength (dry and wet) (N))	-	500	-
7.1- Table 2- iv)(PERFORMANCE REQUIREMENTS - pH)	-	250	-
7.1- Table 2- vi)(PERFORMANCE REQUIREMENTS - Cleanliness–microbial (CFU/100 cm2))	-	3600	-
7.2(The performance requirements of reusable products shall have to be met after declared wash and sterilization cycle)	-	0	-
8.2(PACKAGING of Products STERILIZATION of Products)	-	500	-
9(MARKING)	-	500	-
5(WORKMANSHIP AND FINISH)	-	0	-
6- Table 1- i)(GENERAL REQUIREMENTS - Colour fastness to rubbing a) Dry 4 or better b) Wet)	-	0	-
6- Table 1- ii)(GENERAL REQUIREMENTS - Colour fastness to perspiration (acidic and alkaline) a) Colour change b) Staining)	-	0	-
6- Table 1- iii)(GENERAL REQUIREMENTS - Colour fastness to washing a) Colour change b) Staining)	-	0	-
6- Table 1- v)(GENERAL REQUIREMENTS - Dimensional stability to washing, percentage Length and width)	-	0	-
7.1- Table 2- i)(PERFORMANCE REQUIREMENTS - Tensile strength (dry and wet) (N))	-	0	-
7.1- Table 2- ii)(PERFORMANCE REQUIREMENTS - Bursting strength (dry and wet) (kPa))	-	0	-
7.1- Table 2- iii)(PERFORMANCE REQUIREMENTS - Seam strength (dry and wet) (N))	-	0	-
7.1- Table 2- iv)(PERFORMANCE REQUIREMENTS - pH)	-	0	-
7.1- Table 2- vi)(PERFORMANCE REQUIREMENTS - Cleanliness–microbial (CFU/100 cm2))	-	0	-
8.2(PACKAGING of Products STERILIZATION of Products)	-	0	-
9(MARKING)	-	0	-
6- Table 1- vi)(GENERAL REQUIREMENTS - Pilling resistance)	-	500	-
6- Table 1- vi)(GENERAL REQUIREMENTS - Pilling resistance)	-	0	-

20 Feb, 2028

-
-

IS 17349 (2020)

Medical textiles – Shoe covers – Specification

6100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Workmanship and finish)	-	500	-
5.2 - Table 1 - (i)(Cleanliness - Microbial)	-	3600	-
5.2 - Table 1 - (ii)(Tensile Strength)	-	500	-
5.2 - Table 1 - (iii)(Bursting Strength)	-	500	-
6(Packing)	-	500	-
7(Marking)	-	500	-
5(Requirements)	-	0	-
5.1(Workmanship and Finish)	-	0	-
5.2- Table 1- i)(Cleanliness – Microbial)	-	0	-
5.2- Table 1- ii)(Tensile strength)	-	0	-
5.2- Table 1- iii)(Bursting strength)	-	0	-
6(Packing)	-	0	-
7(Marking)	-	0	-
5.1(Workmanship and finish)	-	0	-
5.2 - Table 1 - (i)(Cleanliness - Microbial)	-	0	-
5.2 - Table 1 - (ii)(Tensile Strength)	-	0	-
5.2 - Table 1 - (iii)(Bursting Strength)	-	0	-
6(Packing)	-	0	-
7(Marking)	-	0	-
5(Requirements)	-	0	-
5.1(Workmanship and Finish)	-	0	-
5.2- Table 1- i)(Cleanliness – Microbial)	-	0	-
5.2- Table 1- ii)(Tensile strength)	-	0	-
5.2- Table 1- iii)(Bursting strength)	-	0	-
6(Packing)	-	0	-
7(Marking)	-	0	-

20 Feb, 2028

-
-

IS 9473 (2002)

Respiratory protective devices - Filtering half masks to protect against particles - Specification (First Revision)

62000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Material)	-	500	-
Cl 5.2(Cleaning and Disinfecting)	-	2000	-
Cl 5.3(Practical Performance Test)	-	2000	-
5.4.1.a(Total Inward Leakage (TC-5 Samples) )	-	2000	-
5.4.1.b(Total Inward Leakage (TC -5 Samples))	-	2000	-
5.4.1.a(Total Inward Leakage (AR-5 Samples) )	-	2000	-
5.4.1.b(Total lnward Leakage (AR- 5 Samples) )	-	2000	-
5.4.2(Penetration of Filter Material (MS-3 Samples) )	-	3000	-
5.4.2(Penetration of Filter Material (SW-3 Samples) )	-	3000	-
5.4.2(Penetration of Filter Material (TC-3 Samples) )	-	3000	-
5.4.2(Penetration of Filter Material (AR-3 Samples) )	-	3000	-
Cl 5.5(Compatibility with Skin)	-	500	-
Cl 5.6(Flammability)	-	4000	Flammability (As received condition) - Rs 2000 Flammability (Temperature condition) - Rs 2000
Cl 5.7(Carbon Dioxide Content of the Inhalation Air)	-	5000	-
Cl 5.8(Head Harness)	-	500	-
Cl 5.9(Field of Vision)	-	1500	-
Cl 5.10(Inhalation and Exhalation Valves)	-	8000	Inhalation & exhalation valves - Rs 3000 Exhalation valve Flow i)As received) - Rs 1000 ii)Temp conditioning - Rs 1000 Exhalation valve Tensile force i)As Received - Rs 1000 ii)Temp conditioning - Rs 1000 iii)Simulated wearing -Rs 1000
Cl 5.11(Breathing Resistance)	-	9000	As received - Rs 3000 Temp Conditioning -Rs 3000 Simulated Wearing - Rs 3000
Cl 5.12(Clogging (Coal & Dolomite))	-	6000	-
Cl 5.13(De-mountable Parts)	-	500	-
6.1(Packing)	-	500	-
6.2.1(Marking)	-	500	-
6.2.2(Marking)	-	500	-
7.0(Instructions for Use)	-	1000	-

20 Feb, 2028

-
-

IS 17423 (2020)

Medical textiles – Coveralls for COVID 19 – Specification

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 1)	-	4500	GST 18% Excluding.
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 2)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 3)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 1)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 2)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 3)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 1)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 2)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 3)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 1)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 2)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 3)	-	0	-

20 Feb, 2028

-
-

IS 16289 (2014)

Medical textiles - Surgical face masks - Specification

29500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Materials and Construction)	-	500	-
4.1.2(Design)	-	500	-
4.2 Table 1 i)(Bacterial Filtration Efficiency)	-	8000	-
4.2 Table 1 ii)(Differential Pressure)	-	2500	-
4.2 Table 1 iii)(Splash Resistance)	-	6000	-
4.2 Table 1 iv)(Sub-micron particulate filtration efficiency at 0.1 µ)	-	10000	-

20 Feb, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

VIRIDIAN TESTING LABORATORIES LLP, TIRUPUR

8/3176-A5, Jothipuram, 2nd Street,, PN Road, Pandiyan Nagar,, Tirupur- 641602. Tamilnadu., Tiruppur, Tamil Nadu, 641602

9865698286 venkatesh@viridianlab.com

Scope List