BIS - LIMS (Laboratory Information Management System)

TVS LABS

A-5/16A, A-Block, Third & Fourth Floor, Jhilmil Industrial Area, Shahdara, Delhi, Shahdara, Delhi, 110095

9116653300 tvslabs@gmail.com

Scope List

Reset

14 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 14927 : Part 2 : Sec 1 (2023)

Cable trunking systems and cable ducting Systems for electrical installations Part 2-1: particular requirements cable trunking systems and cable Ducting systems intended for mounting on walls and ceilings first revision

Up to Including 100x50mm

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.9.1(Sharp edges)	-	500	-
Cl.9.2(Apparatus mounting)	-	500	-
Cl.9.3(Means for protective separation and/or retention)	-	500	-
Cl.9.4(Mechanical connections)	-	500	-
Cl.9.5(Accessible conductive parts)	-	1000	-
Cl.9.6(Equipotential bonding)	-	500	-
Cl.9.7(Access to live parts)	-	500	-
Cl.9.8(Inlet openings)	-	500	-
Cl.9.9(Membranes)	-	500	-
Cl.9.10(Cable restrainer)	-	500	-
Cl.9.11(Cable anchorage)	-	500	-
Cl. 9.101(Assembling)	-	150	-
Cl. 9.102(Contact between liquids and insulated conductors and live parts)	-	500	-
Cl.10.1(Linear deflection test)	-	1500	-
Cl.10.2(Cable support test)	-	2500	-
Cl.10.5(External load test)	-	2000	-
Cl.10.6(System access cover retention)	-	500	-
Cl. 10.101(Compression test for CDS)	-	1500	-
Cl.11.1(Electrical continuity)	-	2500	-
Cl.11.2(Electrical insulation)	-	3000	-
Cl.12(Thermal properties)	-	500	-
Cl.13(Fire hazard)	-	1500	-
Cl.10.1(Mechanical strength)	-	1500	-
Cl.10.3(Impact test)	-	2500	-
Cl.14(External influences)	-	500	-

18 Oct, 2028

-
-

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

UP TO AND INCLUDING 32A

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	10	-
Cl-5(General notes on tests)	-	10	-
Cl-6(Rating)	-	20	-
Cl-7(Classification)	-	50	-
Cl-8(Marking)	-	100	-
Cl-9(Checking of dimensions)	-	150	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	150	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	150	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	250	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	250	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	250	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	200	-
Cl-11(Provision for earthing)	-	200	-
Cl-12(Terminals)	-	200	-
Cl-13(Constructional requirements)	-	200	-
Cl-14(Mechanism)	-	250	-
Cl-15.1(Resistance to Ageing)	-	1000	-
Cl-15.3(Resistance to Humidity)	-	1000	-
Cl-16.1(General)	-	200	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	150	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	500	-
Cl-18(Making and breaking capacity)	-	2000	-
Cl-19(Normal operation)	-	2000	-
Cl-20(Mechanical strength)	-	200	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	200	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	250	-
Cl-24.1(Resistance to abnormal heat and fire)	-	250	-
Cl-25(Resistance to rusting)	-	250	-
19.1(Test for Switches Intended for Inductive Loads)	-	500	-
13.5(Attachment of knobs)	-	200	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	250	-
12.3.12(Table 13)(Deflection Test Forces)	-	230	-
Cl-24.2(Resistance to tracking)	-	500	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	2500	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	3000	-
Cl-19(Normal operation)	-	2500	-
Cl-4(General Requirements)	-	10	-
Cl-5(General notes on tests)	-	10	-
Cl-6(Rating)	-	20	-
Cl-7(Classification)	-	50	-
Cl-8(Marking)	-	100	-
Cl-9(Checking of dimensions)	-	150	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	150	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	150	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	250	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	250	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	250	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	200	-
Cl-11(Provision for earthing)	-	200	-
Cl-12(Terminals)	-	200	-
Cl-13(Constructional requirements)	-	200	-
Cl-14(Mechanism)	-	250	-
Cl-15.1(Resistance to Ageing)	-	1000	-
Cl-15.3(Resistance to Humidity)	-	1000	-
Cl-16.1(General)	-	200	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	150	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	500	-
Cl-18(Making and breaking capacity)	-	2000	-
Cl-19(Normal operation)	-	2000	-
Cl-20(Mechanical strength)	-	200	-
Cl-21(Resistance to heat)	-	2000	-
Cl-22(Screws, current carrying parts and connections)	-	200	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	250	-
Cl-24.1(Resistance to abnormal heat and fire)	-	250	-
Cl-25(Resistance to rusting)	-	250	-
19.1(Test for Switches Intended for Inductive Loads)	-	500	-
13.5(Attachment of knobs)	-	200	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	250	-
12.3.12(Table 13)(Deflection Test Forces)	-	230	-
Cl-24.2(Resistance to tracking)	-	500	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	0	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	0	-

18 Oct, 2028

-
-

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

UP TO & INCLUDING 32A

14475 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Ratings)	-	100	-
6(Ratings)	-	100	-
6(RATINGS)	-	100	-
6.1(RATINGS)	-	0	-
6.1(RATINGS)	-	0	-
6.1(RATINGS)	-	0	-
6.1(RATINGS)	-	0	-
6.2(RATINGS)	-	0	-
6.2(RATINGS)	-	0	-
6.2(RATINGS)	-	0	-
6.2(RATINGS)	-	0	-
7(CLASSIFICATION)	-	100	-
7(CLASSIFICATION)	-	100	-
7(CLASSIFICATION)	-	100	-
7(CLASSIFICATION)	-	100	-
7(CLASSIFICATION)	-	100	-
7.1.1(Accessories Classification)	-	0	-
7.1.2(Accessories Classification)	-	0	-
7.1.3(Accessories Classification)	-	0	-
7.1.4(Accessories Classification)	-	0	-
7.1.5(Accessories Classification)	-	0	-
7.2.1(Socket-Outlets Classification)	-	0	-
7.2.2(Socket-Outlets Classification)	-	0	-
7.2.3(Socket-Outlets Classification)	-	0	-
7.2.4(Socket-Outlets Classification)	-	0	-
7.3(Plug Classification)	-	0	-
8.1(MARKING)	-	0	-
8.8(MARKING)	-	0	-
8.9(MARKING)	-	0	-
9.1(CHECKING OF DIMENSIONS)	-	0	-
9.2(CHECKING OF DIMENSIONS)	-	0	-
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
11.1(PROVISIONS FOR EARTHING)	-	0	-
11.2(PROVISIONS FOR EARTHING)	-	0	-
11.3(PROVISIONS FOR EARTHING)	-	0	-
11.4(PROVISIONS FOR EARTHING)	-	0	-
11.5(PROVISIONS FOR EARTHING)	-	0	-
11.6(PROVISIONS FOR EARTHING)	-	0	-
12.1.1(TERMINALS)	-	0	-
12.1.2(TERMINALS)	-	0	-
12.2.1(TERMINALS)	-	0	-
12.2.2(TERMINALS)	-	0	-
12.2.3(TERMINALS)	-	0	-
12.2.4(TERMINALS)	-	0	-
12.2.5(TERMINALS)	-	0	-
12.2.6(TERMINALS)	-	0	-
12.2.7(TERMINALS)	-	0	-
12.2.8(TERMINALS)	-	0	-
12.2.9(TERMINALS)	-	0	-
12.2.10(TERMINALS)	-	0	-
12.2.11(TERMINALS)	-	0	-
12.3.1(TERMINALS)	-	0	-
12.3.2(TERMINALS)	-	0	-
12.3.3(TERMINALS)	-	0	-
12.3.4(TERMINALS)	-	0	-
12.3.5(TERMINALS)	-	0	-
12.3.6(TERMINALS)	-	0	-
12.3.7(TERMINALS)	-	0	-
12.3.8(TERMINALS)	-	0	-
12.3.9(TERMINALS)	-	0	-
12.3.10(TERMINALS)	-	0	-
12.3.11(TERMINALS)	-	0	-
12.3.12(TERMINALS)	-	0	-
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
13.3(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
13.4(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
13.5(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
13.6(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
13.7(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
13.8(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
13.9(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
13.11(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
13.12(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
13.13(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
13.14(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
13.15(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
13.16(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
13.17(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
13.18(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	0
13.19(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
13.21(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
13.22(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
13.23(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	0
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	-
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	1
15(INTERLOCKED SOCKET-OUTLETS)	-	100	-
16.1(RESISTANCE TO AGEING,)	-	0	-
16.3(Resistance to Humidity)	-	0	-
17.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	-
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	-
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	-
18(OPERATION OF EARTHING CONTACTS)	-	200	-
19(TEMPERATURE RISE)	-	1000	-
20(BREAKING CAPACITY)	-	2500	-
21(NORMAL OPERATION)	-	2500	-
21(NORMAL OPERATION)	-	2500	-
21(NORMAL OPERATION)	-	2500	-
21(NORMAL OPERATION)	-	2500	-
22.1(Verification of the Maximum Withdrawal Force)	-	0	1
22.2(Verification of Minimum Withdrawal Force)	-	0	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	-
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	-
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	-
24.1(MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-	0	-
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	-
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	0	-
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	-
24.2(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies other than elastomeric or thermoplastic material)	-	0	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	-
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	0	-
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	-
24.4(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	-
24.4(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	-
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	-
24.5(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	-
24.5(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	-
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	-
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	0	1
24.8(MECHANICAL STRENGTH For shuttered socket-outlets)	-	0	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	1
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	-
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	-
24.11(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	0	-
24.12(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	0	-
24.13(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	0	-
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	0	-
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	0	-
24.14.3(MECHANICAL STRENGTH For plugs and portable socket-outlets)	-	0	-
24.15(MECHANICAL STRENGTH )	-	0	-
24.16(MECHANICAL STRENGTH )	-	0	-
24.16(MECHANICAL STRENGTH For shroud of portable socket-outlets)	-	0	-
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	0	-
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	0	-
25.2(RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-	0	-
25.3(RESISTANCE TO HEAT Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them)	-	0	-
25.4(RESISTANCE TO HEAT )	-	0	-
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	-
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	-
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	-
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	-
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	-
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	-
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	-
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	-
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	-
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	0	-
28.1.2(Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-	0	-
28.2(Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-	0	-
29(RESISTANCE TO RUSTING)	-	300	-
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	0	-
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	1	-
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	0	-
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	0	-
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	0	-
7.1.1(Accessories Classification)	-	0	-
7.1.2(Accessories Classification)	-	0	-
7.1.3(Accessories Classification)	-	0	-
7.1.4(Accessories Classification)	-	0	-
7.1.5(Accessories Classification)	-	0	-
7.2.1(Socket-Outlets Classification)	-	0	-
7.2.2(Socket-Outlets Classification)	-	0	0
7.2.3(Socket-Outlets Classification)	-	0	-
7.2.4(Socket-Outlets Classification)	-	0	-
7.3(Plug Classification)	-	0	-
8.1(MARKING)	-	0	-
8.8(MARKING)	-	0	-
8.9(MARKING)	-	0	-
9.1(CHECKING OF DIMENSIONS)	-	0	-
9.2(CHECKING OF DIMENSIONS)	-	0	-
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	0
11.1(PROVISIONS FOR EARTHING)	-	0	-
11.2(PROVISIONS FOR EARTHING)	-	0	-
11.3(PROVISIONS FOR EARTHING)	-	0	-
11.4(PROVISIONS FOR EARTHING)	-	0	-
11.5(PROVISIONS FOR EARTHING)	-	0	-
11.6(PROVISIONS FOR EARTHING)	-	0	-
12.1.1(TERMINALS)	-	0	-
12.1.2(TERMINALS)	-	0	-
12.2.1(TERMINALS)	-	0	-
12.2.2(TERMINALS)	-	0	-
12.2.3(TERMINALS)	-	0	-
12.2.4(TERMINALS)	-	0	-
12.2.5(TERMINALS)	-	0	-
12.2.6(TERMINALS)	-	0	-
12.2.7(TERMINALS)	-	0	-
12.2.8(TERMINALS)	-	0	-
12.2.9(TERMINALS)	-	0	-
12.2.10(TERMINALS)	-	0	-
12.2.11(TERMINALS)	-	0	-
12.3.1(TERMINALS)	-	0	-
12.3.2(TERMINALS)	-	0	-
12.3.3(TERMINALS)	-	0	-
12.3.4(TERMINALS)	-	0	1
12.3.5(TERMINALS)	-	0	-
12.3.6(TERMINALS)	-	0	-
12.3.7(TERMINALS)	-	1	-
12.3.8(TERMINALS)	-	1	-
12.3.9(TERMINALS)	-	1	-
12.3.10(TERMINALS)	-	1	-
12.3.11(TERMINALS)	-	1	-
12.3.12(TERMINALS)	-	1	-
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
13.3(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
13.4(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
13.5(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
13.6(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	1
13.7(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
13.8(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
13.9(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
13.11(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
13.12(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
13.13(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
13.14(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
13.15(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
13.16(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
13.17(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
13.18(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
13.19(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
13.21(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
13.22(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
13.23(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	1
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
15(INTERLOCKED SOCKET-OUTLETS)	-	100	-
16.1(RESISTANCE TO AGEING,)	-	1	-
16.3(Resistance to Humidity)	-	1	-
17.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1	-
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1	-
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1	-
18(OPERATION OF EARTHING CONTACTS)	-	200	-
19(TEMPERATURE RISE)	-	1000	-
20(BREAKING CAPACITY)	-	2500	-
21(NORMAL OPERATION)	-	2500	-
21(NORMAL OPERATION)	-	2500	-
21(NORMAL OPERATION)	-	2500	-
21(NORMAL OPERATION)	-	2500	-
22.1(Verification of the Maximum Withdrawal Force)	-	1	-
22.2(Verification of Minimum Withdrawal Force)	-	1	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1	-
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1	-
24.1(MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-	1	-
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	1	-
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	1	-
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	1	-
24.2(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	1	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies other than elastomeric or thermoplastic material)	-	1	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	1	-
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	1	-
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	1	-
24.4(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	1	-
24.4(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	1	-
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1	-
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	1	-
24.5(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	1	-
24.5(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	1	-
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	1	-
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	1	-
24.8(MECHANICAL STRENGTH For shuttered socket-outlets)	-	1	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	1	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	1	-
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	1	-
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	1	-
24.11(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	1	-
24.12(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	1	-
24.13(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	1	-
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	1	-
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	1	-
24.14.3(MECHANICAL STRENGTH For plugs and portable socket-outlets)	-	1	-
24.15(MECHANICAL STRENGTH )	-	1	-
24.16(MECHANICAL STRENGTH )	-	1	-
24.16(MECHANICAL STRENGTH For shroud of portable socket-outlets)	-	1	-
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	1	1
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	1	-
25.2(RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-	1	-
25.3(RESISTANCE TO HEAT Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them)	-	1	-
25.4(RESISTANCE TO HEAT )	-	1	-
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	-
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	-
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	-
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	1
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	1
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	-
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	-
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1	-
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1	-
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1	-
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	1	-
28.1.2(Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-	1	-
28.2(Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-	1	1
29(RESISTANCE TO RUSTING)	-	300	-
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	1	-
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	1	-
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	1	-
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	1	-
8.7(Marking)	-	1	-
8.6(Marking)	-	1	-
8.5(Marking)	-	1	-
8.4(Marking)	-	1	-
8.3(Marking)	-	1	-
8.2(Marking)	-	1	-
10.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
23.2(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1	1
24.17(MECHANICAL STRENGTH)	-	1	-
24.18(MECHANICAL STRENGTH)	-	1	-
24.19(MECHANICAL STRENGTH)	-	1	-
28.1(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	1	-
27(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	200	-
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	-
26(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	150	-
25.4(RESISTANCE TO HEAT)	-	1	-
25(RESISTANCE TO HEAT)	-	250	-
24.19(MECHANICAL STRENGTH)	-	1	-
24.17(MECHANICAL STRENGTH)	-	1	-
24.14(MECHANICAL STRENGTH)	-	1	-
24(MECHANICAL STRENGTH)	-	1	-
24.18(MECHANICAL STRENGTH)	-	1	-
23(FLEXIBLE CABLES AND THEIR CONNECTION)	-	150	-
22.1.2(FORCE NECESSARY TO WITHDRAW THE PLUG)	-	1	-
22.1.1(FORCE NECESSARY TO WITHDRAW THE PLUG)	-	1	-
19.3(TEMPERATURE RISE)	-	1	-
19.2(TEMPERATURE RISE)	-	1	-
19.1(TEMPERATURE RISE)	-	1	-
17.1.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1	-
17.1.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1	-
16.2.2(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	1	-
16.2.1.2(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	1	-
16.2.1.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	1	-
16.2.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	1	1
16(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	50	-
14.10.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.10.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.10.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	1
13.7.3 (CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
13.7.2 (CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
13.7.1(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
13(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	100	-
12.3.11 (b)(TERMINALS)	-	1	-
12.3.11 (a)(TERMINALS)	-	1	-
12.3(TERMINALS)	-	1	-
12.2.1(TERMINALS)	-	1	-
12.2(TERMINALS)	-	1	-
12.1(TERMINALS)	-	1	-
12(TERMINALS)	-	1000	-
11(PROVISION FOR EARTHING)	-	200	-
10.2.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10.2.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	250	-
9(CHECKING OF DIMENSIONS)	-	200	-
8.7(MARKING)	-	1	-
8.6(MARKING)	-	1	-
8.5(MARKING)	-	1	-
8.4(MARKING)	-	1	-
8.3(MARKING)	-	1	-
8.2(MARKING)	-	1	-
8(MARKING)	-	100	-
7.2(CLASSIFICATION)	-	1	-
7.1(CLASSIFICATION)	-	1	-
30(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES)	-	300	-
28.1(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	1	-
28(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	1	-
27(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	200	1
26(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	150	-
25(RESISTANCE TO HEAT)	-	250	-
24.19(MECHANICAL STRENGTH)	-	1	-
24.18(MECHANICAL STRENGTH)	-	1	-
24.17(MECHANICAL STRENGTH)	-	1	-
24.14(MECHANICAL STRENGTH)	-	1	-
24(MECHANICAL STRENGTH)	-	150	-
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1	-
23.2(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1	-
19.3(TEMPERATURE RISE)	-	1	-
19.2(TEMPERATURE RISE)	-	1	-
19.1(TEMPERATURE RISE)	-	1	-
23(FLEXIBLE CABLES AND THEIR CONNECTION)	-	150	-
17.1.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1	-
17.1.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1	-
17(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	500	-
16.2.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	1	-
14.10.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.10.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.10.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
12.3.11 (b)(TERMINALS)	-	1	-
12.3.11 (a)(TERMINALS)	-	1	-
12.3(TERMINALS)	-	1	-
12.2(TERMINALS)	-	1	-
12.1(TERMINALS)	-	1	-
12(TERMINALS)	-	1000	-
11(PROVISION FOR EARTHING)	-	200	-
10.2.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10.2.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	250	-
9(CHECKING OF DIMENSIONS)	-	200	-
8.7(MARKING)	-	1	-
8.6(MARKING)	-	1	-
8.5(MARKING)	-	1	-
8.4(MARKING)	-	1	-
8.3(MARKING)	-	1	-
8.2(MARKING)	-	1	-
8(MARKING)	-	100	-
7.2(CLASSIFICATION)	-	1	-
7.1(CLASSIFICATION)	-	1	-
28.1.2(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	1	-
28.1(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	1	1
27(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	200	-
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	-
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	-
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	-
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	-
26(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	150	-
25(RESISTANCE TO HEAT)	-	250	-
24.18(MECHANICAL STRENGTH)	-	1	-
24.17(MECHANICAL STRENGTH)	-	1	-
24.16 & 24.14.2(MECHANICAL STRENGTH)	-	1	-
24.16 & 24.14.1(MECHANICAL STRENGTH)	-	1	-
24.15 & 24.14.2(MECHANICAL STRENGTH)	-	1	-
24.15 & 24.14.1(MECHANICAL STRENGTH)	-	1	-
24.14.2(MECHANICAL STRENGTH)	-	1	-
24.14.1(MECHANICAL STRENGTH)	-	1	-
24.14(MECHANICAL STRENGTH)	-	1	-
24.13(MECHANICAL STRENGTH)	-	1	-
24.12(MECHANICAL STRENGTH)	-	1	-
24.11(MECHANICAL STRENGTH)	-	1	-
24.1(MECHANICAL STRENGTH)	-	1	-
24.9(MECHANICAL STRENGTH)	-	1	-
24.8(MECHANICAL STRENGTH)	-	1	-
24.7(MECHANICAL STRENGTH)	-	1	-
24.6(MECHANICAL STRENGTH)	-	1	-
24.5(MECHANICAL STRENGTH)	-	1	-
24.4(MECHANICAL STRENGTH)	-	1	-
24.3(MECHANICAL STRENGTH)	-	1	-
24.2(MECHANICAL STRENGTH)	-	1	-
24.1(MECHANICAL STRENGTH)	-	1	-
24(MECHANICAL STRENGTH)	-	1	-
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1	-
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1	-
23.2(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1	-
23(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1	-
22(FORCE NECESSARY TO WITHDRAW THE PLUG)	-	200	-
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1	-
17.1.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1	-
17.1.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1	-
17(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1	-
16.2.4(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	1	-
16.2.3(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	1	-
16(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	1	-
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	1
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	1
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
13.23(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
13.22(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
13.21(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
13.2(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
13.19(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
13.18(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
13.15(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
13.13(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
13.12(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
13.11(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
13.8(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
13.7.3 (CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
13.7.2 (CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
13.7.1(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
13.7(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
13(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
12.3.11 (b)(TERMINALS)	-	1	-
12.3.11 (a)(TERMINALS)	-	1	-
12.3.10(TERMINALS)	-	1	1
12.3.9(TERMINALS)	-	1	-
12.3.8(TERMINALS)	-	1	-
12.3.7(TERMINALS)	-	1	-
12.3.6(TERMINALS)	-	1	-
12.3.5(TERMINALS)	-	1	-
12.3.4(TERMINALS)	-	1	-
12.3.3(TERMINALS)	-	1	-
12.3.2(TERMINALS)	-	1	-
12.3.1(TERMINALS)	-	1	-
12.3(TERMINALS)	-	1	-
12.2.8(TERMINALS)	-	1	-
12.2.6(TERMINALS)	-	1	-
12.2(TERMINALS)	-	1	-
12.1.2(TERMINALS)	-	1	-
12.1.1(TERMINALS)	-	1	-
12(TERMINALS)	-	1	-
12.3.12 (TERMINALS)	-	1	-
12.3.11 (b)(TERMINALS)	-	1	-
11.4(PROVISION FOR EARTHING)	-	1	-
11.3(PROVISION FOR EARTHING)	-	1	-
11(PROVISION FOR EARTHING)	-	1	-
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10.2.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10.2.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
9.3(CHECKING OF DIMENSIONS)	-	1	-
9.2(CHECKING OF DIMENSIONS)	-	1	-
9.1(CHECKING OF DIMENSIONS)	-	1	-
8.8(MARKING)	-	1	-
8.7(MARKING)	-	1	-
8.6(MARKING)	-	1	-
8.5(MARKING)	-	1	-
8.4(MARKING)	-	1	-
8.3(MARKING)	-	1	-
8.2(MARKING)	-	1	-
8.1(MARKING)	-	1	1
7.3(CLASSIFICATION)	-	1	-
7.2.5(CLASSIFICATION)	-	1	-
7.2.4(CLASSIFICATION)	-	1	-
7.2.3(CLASSIFICATION)	-	1	1
7.2.2 (CLASSIFICATION)	-	1	1
7.2.1(CLASSIFICATION)	-	1	-
7.2(CLASSIFICATION)	-	1	-
7.1.4(CLASSIFICATION)	-	1	-
7.1.3 (CLASSIFICATION)	-	1	-
7.1.2(CLASSIFICATION)	-	1	-
7.1.1 (CLASSIFICATION)	-	1	-
7.1(CLASSIFICATION)	-	1	-
30(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES)	-	1	-
29(RESISTANCE TO RUSTING)	-	1	-
28.2(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	1	-
28.1.1(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	1	1
28.1(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	1	-
28(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	1	-
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1	-
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1	-
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1	-
27(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1	-
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	-
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	-
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	-
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	-
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	-
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	-
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	-
26(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	-
25.4(RESISTANCE TO HEAT)	-	1	-
25.3(RESISTANCE TO HEAT)	-	1	-
25.2(RESISTANCE TO HEAT)	-	1	-
25.1(RESISTANCE TO HEAT)	-	1	-
25(RESISTANCE TO HEAT)	-	1	-
24.16 & 24.14.2(MECHANICAL STRENGTH)	-	1	-
24.16 & 24.14.1(MECHANICAL STRENGTH)	-	1	-
24.15 & 24.14.2(MECHANICAL STRENGTH)	-	1	-
24.15 & 24.14.1(MECHANICAL STRENGTH)	-	1	-
24.14.2(MECHANICAL STRENGTH)	-	1	-
24.14.1(MECHANICAL STRENGTH)	-	1	-
24.14(MECHANICAL STRENGTH)	-	1	-
24.8(MECHANICAL STRENGTH)	-	1	-
24.6(MECHANICAL STRENGTH)	-	1	-
24.3(MECHANICAL STRENGTH)	-	1	-
24.1(MECHANICAL STRENGTH)	-	1	-
24(MECHANICAL STRENGTH)	-	1	-
23(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1	-
21(NORMAL OPERATION)	-	1	-
20(MAKING AND BREAKING CAPACITY)	-	1	-
19(TEMPERATURE RISE)	-	1	-
18(OPERATION OF EARTHING CONTACTS)	-	1	-
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1	-
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1	-
17.1.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1	-
17.1.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1	-
17(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1	-
16.3(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	1	-
16.2.4(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	1	-
16.2.3(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	1	-
16.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	1	-
16(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	1	-
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	1
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	1
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
12.3.12 (TERMINALS)	-	1	-
12.3.11 (b)(TERMINALS)	-	1	-
12.3.11 (a)(TERMINALS)	-	1	-
12.3.10(TERMINALS)	-	1	-
12.3.9(TERMINALS)	-	1	-
12.3.8(TERMINALS)	-	1	-
12.3.7(TERMINALS)	-	1	-
12.3.6(TERMINALS)	-	1	-
12.3.5(TERMINALS)	-	1	-
12.3.4(TERMINALS)	-	1	-
12.3.3(TERMINALS)	-	1	-
12.3.2(TERMINALS)	-	1	-
12.3.1(TERMINALS)	-	1	-
12.3(TERMINALS)	-	1	-
12.2.11(TERMINALS)	-	1	-
12.2.10(TERMINALS)	-	1	-
12.2.9(TERMINALS)	-	1	-
12.2.8(TERMINALS)	-	1	-
12.2.7(TERMINALS)	-	1	-
12.2.6(TERMINALS)	-	1	-
12.2.5(TERMINALS)	-	1	-
12.2.4(TERMINALS)	-	1	1
12.2.3(TERMINALS)	-	1	-
12.2.2(TERMINALS)	-	1	-
12.2.1(TERMINALS)	-	1	-
12.2(TERMINALS)	-	1	-
12.1.2(TERMINALS)	-	1	1
12.1.1(TERMINALS)	-	1	-
12(TERMINALS)	-	1	-
11.5(PROVISION FOR EARTHING)	-	1	-
11.4(PROVISION FOR EARTHING)	-	1	-
11.3(PROVISION FOR EARTHING)	-	1	-
11.2(PROVISION FOR EARTHING)	-	1	-
11.1(PROVISION FOR EARTHING)	-	1	-
11(PROVISION FOR EARTHING)	-	1	-
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10.2.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10.2.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
9.3(CHECKING OF DIMENSIONS)	-	1	-
9.2(CHECKING OF DIMENSIONS)	-	1	-
9.1(CHECKING OF DIMENSIONS)	-	1	-
8.8(MARKING)	-	1	-
8.7(MARKING)	-	1	-
8.6(MARKING)	-	1	-
8.5(MARKING)	-	1	-
8.4(MARKING)	-	1	-
8.3(MARKING)	-	1	-
8.2(MARKING)	-	1	-
8.1(MARKING)	-	1	-
7.3(CLASSIFICATION)	-	1	-
7.2.5(CLASSIFICATION)	-	1	-
7.2.4(CLASSIFICATION)	-	1	-
7.2.3(CLASSIFICATION)	-	1	-
7.2.2 (CLASSIFICATION)	-	1	1
7.2.1(CLASSIFICATION)	-	1	-
7.2(CLASSIFICATION)	-	1	-
7.1.4(CLASSIFICATION)	-	1	-
7.1.3 (CLASSIFICATION)	-	1	-
7.1.2(CLASSIFICATION)	-	1	-
7.1.1 (CLASSIFICATION)	-	1	-
7.1(CLASSIFICATION)	-	1	-
28.1(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	1	-
27(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1	-
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	-
26(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	-
25.4(RESISTANCE TO HEAT)	-	1	-
25(RESISTANCE TO HEAT)	-	1	-
24.19(MECHANICAL STRENGTH)	-	1	-
24.18(MECHANICAL STRENGTH)	-	1	-
24.17(MECHANICAL STRENGTH)	-	1	-
24.14(MECHANICAL STRENGTH)	-	1	-
24(MECHANICAL STRENGTH)	-	1	-
23(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1	-
22.1.2(FORCE NECESSARY TO WITHDRAW THE PLUG)	-	1	-
22.1.1(FORCE NECESSARY TO WITHDRAW THE PLUG)	-	1	-
19.3(TEMPERATURE RISE)	-	1	-
19.2(TEMPERATURE RISE)	-	1	-
19.1(TEMPERATURE RISE)	-	1	-
17.1.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1	-
17.1.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1	-
16(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	1	-
14.10.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.10.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.10.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
13.7.3 (CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
13.7.2 (CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
13.7.1(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
13(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	1	-
12.3.11 (a)(TERMINALS)	-	1	-
12.3(TERMINALS)	-	1	-
12.2.1(TERMINALS)	-	1	-
12.2(TERMINALS)	-	1	-
12.1(TERMINALS)	-	1	-
12(TERMINALS)	-	1	-
11(PROVISION FOR EARTHING)	-	1	-
10.2.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10.2.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
9(CHECKING OF DIMENSIONS)	-	1	-
8.7(MARKING)	-	12	-
8.6(MARKING)	-	1	-
8.5(MARKING)	-	1	1
8.4(MARKING)	-	1	-
8.3(MARKING)	-	1	-
8.2(MARKING)	-	1	-
8(MARKING)	-	1	-
7.2(CLASSIFICATION)	-	1	-
7.1(CLASSIFICATION)	-	1	-
6.2(RATINGS)	-	1	-
6.1(RATINGS)	-	1	-
30(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES)	-	1	-
28.1(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	1	-
28(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	1	-
27(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1	-
26(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1	-
25(RESISTANCE TO HEAT)	-	1	-
24.19(MECHANICAL STRENGTH)	-	1	-
24.18(MECHANICAL STRENGTH)	-	1	-
24.17(MECHANICAL STRENGTH)	-	1	-
24.14(MECHANICAL STRENGTH)	-	1	-
24(MECHANICAL STRENGTH)	-	1	-
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1	-
23.2(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1	-
23(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1	-
19.3(TEMPERATURE RISE)	-	1	-
19.2(TEMPERATURE RISE)	-	1	-
19.1(TEMPERATURE RISE)	-	1	-
17.1.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1	-
17.1.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1	-
17(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1	-
14.10.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.10.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14.10.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1	-
12.3.11 (b)(TERMINALS)	-	1	-
12.3.11 (a)(TERMINALS)	-	1	-
12.3(TERMINALS)	-	1	-
12.2(TERMINALS)	-	1	-
12.1(TERMINALS)	-	1	-
12(TERMINALS)	-	1	-
11(PROVISION FOR EARTHING)	-	1	-
10.2.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10.2.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	1	-
9(CHECKING OF DIMENSIONS)	-	1	-
8.7(MARKING)	-	1	-
8.6(MARKING)	-	1	-
8.5(MARKING)	-	1	-
8.4(MARKING)	-	1	-
8.3(MARKING)	-	1	-
8.2(MARKING)	-	1	-
8(MARKING)	-	1	-
7.2(CLASSIFICATION)	-	1	-
7.1(CLASSIFICATION)	-	1	-
6.2(RATINGS)	-	1	-
6.1(RATINGS)	-	1	-
9.1 (a)(Dimension of plug (6/10A))	-	1	-
9.1 (b)(Dimension of plug (6/10A))	-	1	-
9.1 (c)(Dimension of plug (6/10A))	-	1	-
9.1 (d)(Dimension of plug (6/10A))	-	1	-
9.1 (e)(Dimension of plug (6/10A))	-	1	-
9.1 (f)(Dimension of plug (6/10A))	-	1	-
9.1 (g)(Dimension of plug (6/10A))	-	1	-
9.1 (h)(Dimension of plug (16 A))	-	1	-
9.1 (i)(Dimension of plug (16 A))	-	1	-
9.1 (j)(Dimension of plug (16 A))	-	1	-
9.1 (k)(Dimension of plug (16 A))	-	1	-
9.1 (l)(Dimension of plug (16 A))	-	1	-
9.1 (m)(Dimension of plug (16 A))	-	1	-
9.1 (n)()	-	1	-
13.2.1(Terminal)	-	1	-
22.2(Resistance to Rusting)	-	1	-

18 Oct, 2028

-
-

IS 3854 (1997)

Switches for domestic and similar purposes - Specification (Second Revision)

Upto & including 32A

11850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Marking)	-	100	-
8(Marking)	-	100	-
8(Marking)	-	100	-
8(Marking)	-	100	-
8(Marking)	-	100	-
8(Marking)	-	100	-
8(Marking)	-	100	-
8(Marking)	-	100	-
8(Marking)	-	100	-
8.9(Marking)	-	100	-
8(Marking)	-	100	-
6(Rating)	-	100	-
6(Rating)	-	100	-
7(Classification)	-	100	-
7(Classification)	-	100	-
7(Classification)	-	100	-
7(Classification)	-	100	-
7(Classification)	-	100	-
7(Classification)	-	100	-
7(Classification)	-	100	-
7(Classification)	-	100	-
7(Classification)	-	100	-
10(Protection against Electric Shock)	-	250	-
11.1(Provision for earthing)	-	200	-
12(Terminals)	-	1000	-
12.2.1(Terminals)	-	1000	-
12(Terminals)	-	1000	-
12.2.2(Connection of conductor)	-	1000	-
12.2.3(Mechanical strength of terminals)	-	1000	-
12.2.3(Mechanical strength of terminals)	-	1000	-
12.2.4(Resistance to corrosion)	-	1000	-
12.2.4(Resistance to corrosion)	-	1000	-
12.2.5(Undue damage to conductor)	-	1000	-
12.2.7(Insertion of conductor)	-	1000	-
12.2.9(Locking against accidental loosening)	-	1000	-
12.2.11(Distance between screw and conductor)	-	1000	-
12.3.2(Screwless terminals)	-	1000	-
12.3.3(Connectin of conductor)	-	1000	-
12.3.4(Material of terminals)	-	1000	-
12.3.5(Clamping)	-	1000	-
12.3.5(Clamping)	-	1000	-
12.3.7(v) Interconnection of conductors [Cl. 12.3.7])	-	1000	-
12.3.11(vi) Electrical & Thermal Stresses [Cl 12.3.11])	-	1000	-
12.3.11(vi) Electrical & Thermal Stresses [Cl 12.3.11])	-	1000	-
12.3.12(vii) Deflection Stresses [Cl. 12.3.12])	-	1000	-
12.2.11(Distance between screw and conductor)	-	1000	-
13.1(a) Insulating lining, barriers and the like [Cl 13.1])	-	100	-
13.2(b) Construction of switch [Cl 13.2])	-	100	-
13.2(i) Installation Test)	-	100	-
13.3(c) Covers,cover plates and actuating members [Cl 13.3])	-	100	-
13.4(d) Ordinary switches [Cl 13.4])	-	100	-
13.5(e) Rotary switches [Cl 13.5])	-	100	-
13.6(f) Screws and other means [Cl 13.6])	-	100	-
13.7(g) Combination of switches or switches and socket outlets [Cl 13.7])	-	100	-
13.8(h) Assessories combined with switches [Cl. 13.8])	-	100	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	100	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	100	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	100	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	100	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	100	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	100	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	100	-
13.1(k) Switches to be installed in a box [Cl. 13.10])	-	100	-
13.11(l) Surface type switches other than ordinary switch [Cl. 13.11])	-	100	-
13.12, 13.13, 13.14(m) Inlet opening [Cl. 13.12.13.13 & 13.14])	-	100	-
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	100	-
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	100	-
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	100	-
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	100	-
14(Mechanism [Cl. 14])	-	100	-
14.4(Mechanism)	-	100	-
15.1(Resistance to Ageing, to Harmful Ingress of water and to Humidity [Cl. 15]: Resistance to Ageing, [Cl. 15.1])	-	3000	-
15.2(b)Resistance to Harmful ingress of water [Cl. 15.2])	-	500	-
15.2(b)Resistance to Harmful ingress of water [Cl. 15.2])	-	500	-
15.3(c) Resistance to Humidity [Cl. 15.3])	-	1000	-
16.1(Insulation resistance [Cl. 16.1])	-	500	-
16.2( Electric Strength [Cl. 16.2])	-	1500	-
17(Temperature- rise [Cl. 17])	-	1000	-
18(Marking and breaking Capacity[Cl. 18])	-	2500	-
18(Marking and breaking Capacity[Cl. 18])	-	2500	-
19(Normal Operation [Cl. 19] a) General & Operation)	-	2500	-
19(b) Electric Strength)	-	1500	-
19(c)Temperature-rise )	-	1000	-
14.3(d)Test for arcing and sparking [Cl 14.3])	-	500	-
19.2(Normal Operation (For AX type Switches) [Cl. 19.2])	-	2500	-
19.2(Normal Operation (For AX type Switches) [Cl. 19.2])	-	2500	-
20(Mechanical Strength Test [Cl. 20])	-	150	-
21(Resistance to Heat [Cl.21])	-	200	-
21(Resistance to Heat [Cl.21])	-	200	-
21(Resistance to Heat [Cl.21])	-	200	-
22(Screw, Current Carrying Part And Connection [Cl.22])	-	200	-
22.1(i) Screw & Nuts [Cl.22.1])	-	200	-
22.4(ii) Screw & rivets [Cl . 22.4])	-	200	-
22.3(iii) Electrical Connections [Cl.22.3])	-	200	-
22.5(iv) Current carrying part [Cl.22.5])	-	200	-
23.2(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	200	-
23(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	200	-
23(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	200	-
24.1.1(Resistance to Abnormal Heat & Fire [Cl.24.1] [Glow Wire Test] [Cl.24.1.1])	-	300	-
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	300	-
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	300	-
25 of IS 3854 : 1997(Resistance to rusting)	-	300	-
11.3(Provision for earthing)	-	200	-
11.2(Provision for earthing)	-	200	-
12.3.9(Screwless terminal fixing)	-	1000	-
12.3.8(Screwless terminals design)	-	1000	-
12.3.6(Connection)	-	1000	-
12.3.1(Screwless terminals)	-	1000	-
14.6(Mechanism)	-	100	-
14.5(Mechanism)	-	100	-
16.3(Flash test)	-	500	-
20.8(Mechanical Strength Test)	-	150	-
20.7(Mechanical Strength Test)	-	150	-
20.6(Mechanical Strength Test)	-	150	-
20.5(Mechanical Strength Test)	-	150	-
20.4(Mechanical Strength Test)	-	150	-
20.3(Mechanical strength )	-	150	-
20.2(Mechanical Strength Test)	-	150	-
20.1(Mechanical Strength Test)	-	150	-
21.2(Resistance to Heat)	-	200	-
22.2(Measurement and manual test)	-	200	-
22.6(Inspection and chemical analysis)	-	2500	-
22.5(Screws, current carrying parts and connections )	-	200	-
22.4(Screws, current carrying parts and connections )	-	200	-
22.3(Screws, current carrying parts and connections )	-	200	-
22.2(Screws, current carrying parts and connections )	-	200	-
22.1(Screws, current carrying parts and connections )	-	200	-
21.3(Resistance to heat )	-	200	-
21.2(Resistance to heat )	-	200	-
20.3(Mechanical Strength Test)	-	150	-
21.1(Resistance to heat )	-	200	-
20.9(Mechanical strength )	-	150	-
20.8(Mechanical strength )	-	150	-
20.7(Mechanical strength )	-	150	-
20.6 & 24.4.2(Mechanical strength )	-	500	-
20.6 & 24.4.1(Mechanical strength )	-	500	-
20.5 & 24.4.2(Mechanical strength )	-	500	-
20.5 & 24.4.1(Mechanical strength )	-	500	-
20.4.2(Mechanical strength )	-	150	-
20.4.1(Mechanical strength )	-	150	-
20.4(Mechanical strength )	-	150	-
20.2(Mechanical strength )	-	150	-
20.1(Mechanical strength )	-	150	-
19.2(Normal operation)	-	2500	-
19.1(Normal operation)	-	2500	-
18.2(Making and breaking capacity )	-	2500	-
18.1(Making and breaking capacity )	-	2500	-
16.3(Insulation resistance and electric strength )	-	2000	-
16(Insulation resistance and electric strength )	-	2000	-
15.3(Resistance to ageing, to harmful ingress of water and to humidity )	-	3000	-
15.2.1(Resistance to ageing, to harmful ingress of water and to humidity )	-	3000	-
15.2(Resistance to ageing, to harmful ingress of water and to humidity )	-	3000	-
15.1(Resistance to ageing, to harmful ingress of water and to humidity )	-	3000	-
15(Resistance to ageing, to harmful ingress of water and to humidity )	-	3000	-
14.6(Mechanism)	-	100	-
14.5(Mechanism)	-	100	-
14.4(Mechanism)	-	100	-
14.3(Mechanism)	-	100	-
14.2(Mechanism)	-	100	-
14.1(Mechanism)	-	100	-
13.15.2(Constructional requirements )	-	100	-
13.15.1(Constructional requirements )	-	100	-
13.15(Constructional requirements )	-	100	-
13.14(Constructional requirements )	-	100	-
13.13(Constructional requirements )	-	100	-
13.12(Constructional requirements )	-	100	-
13.11(Constructional requirements )	-	100	-
13.1(Constructional requirements )	-	100	-
13.9(Constructional requirements )	-	100	-
13.8(Constructional requirements )	-	100	-
13.7(Constructional requirements )	-	100	-
13.6(Constructional requirements )	-	100	-
13.5(Constructional requirements )	-	100	-
13.4(Constructional requirements )	-	100	-
13.3.3(Constructional requirements )	-	100	-
13.3.2(Constructional requirements )	-	100	-
13.3.1(Constructional requirements )	-	100	-
13.3(Constructional requirements )	-	100	-
13.2(Constructional requirements )	-	100	-
13.1(Constructional requirements )	-	100	-
13(Constructional requirements )	-	100	-
12.3.12(Terminals)	-	1000	-
12.3.11.b(Terminals)	-	1000	-
12.3.11.a(Terminals)	-	1000	-
12.3.10(Terminals)	-	1000	-
12.3.9(Terminals)	-	1000	-
12.3.8(Terminals)	-	1000	-
12.3.6(Terminals)	-	1000	-
12.3.1(Terminals)	-	1000	-
12.3(Terminals)	-	1000	-
12.2.12(Terminals)	-	1000	-
12.2.10(Terminals)	-	1000	-
12.2.8(Terminals)	-	1000	-
12.2.6(Terminals)	-	1000	-
12.2(Terminals)	-	1000	-
12.1(Terminals)	-	1000	-
11.4(Provision for earthing)	-	200	-
11.3(Provision for earthing)	-	200	-
11.2(Provision for earthing)	-	200	-
11.1(Provision for earthing)	-	200	-
10.7(Protection against electric shock )	-	250	-
10.6(Protection against electric shock )	-	250	-
10.5(Protection against electric shock )	-	250	-
10.4(Protection against electric shock )	-	250	-
10.3.2(Protection against electric shock )	-	250	-
10.3.1(Protection against electric shock )	-	250	-
10.3(Protection against electric shock )	-	250	-
10.2(Protection against electric shock )	-	250	-
10.1(Protection against electric shock )	-	250	-
8.1(Marking)	-	100	-
8.8(Marking)	-	100	-
8.7(Marking)	-	100	-
8.6(Marking)	-	100	-
8.5(Marking)	-	100	-
8.4(Marking)	-	100	-
8.3(Marking)	-	100	-
8.2(Marking)	-	100	-
8.1(Marking)	-	100	-
7.2(Classification)	-	100	-
7.1.8(Classification)	-	100	-
7.1.7(Classification)	-	100	-
7.1.6(Classification)	-	100	-
7.1.5(Classification)	-	100	-
7.1.4(Classification)	-	100	-
7.1.3(Classification)	-	100	-
7.1.2(Classification)	-	100	-
7.1.1(Classification)	-	100	-
7.1(Classification)	-	100	-
6.2(Ratings)	-	100	-
6.1(Ratings)	-	100	-
6(Ratings)	-	100	-
24.1(Resistance of insulating material to abnormal heat, to fire and to tracking )	-	300	-
24(Resistance of insulating material to abnormal heat, to fire and to tracking )	-	300	-
23.2(Creepage distances, clearances & distance through sealing compound )	-	200	-
23.1(Creepage distances, clearances & distance through sealing compound )	-	200	-
22.7(Screws, current carrying parts and connections )	-	200	-
22.6(Screws, current carrying parts and connections )	-	150	-
22.5(Screws, current carrying parts and connections )	-	150	-
22.4(Screws, current carrying parts and connections )	-	150	-
22.3(Screws, current carrying parts and connections )	-	150	-
22.2(Screws, current carrying parts and connections )	-	150	-
22.1(Screws, current carrying parts and connections )	-	150	-
21.3(Resistance to heat )	-	200	-
21.2(Resistance to heat )	-	200	-
21.1(Resistance to heat )	-	200	-
20.9(Mechanical strength )	-	150	-
20.8(Mechanical strength )	-	150	-
20.7(Mechanical strength )	-	150	-
20.6 & 24.4.2(Mechanical strength )	-	500	-
20.6 & 24.4.1(Mechanical strength )	-	500	-
20.5 & 24.4.2(Mechanical strength )	-	500	-
20.5 & 24.4.1(Mechanical strength )	-	500	-
20.4.2(Mechanical strength )	-	150	-
20.4.1(Mechanical strength )	-	150	-
20.4(Mechanical strength )	-	150	-
20.3(Mechanical strength )	-	150	-
20.2(Mechanical strength )	-	150	-
20.1(Mechanical strength )	-	150	-
19.2(Normal operation)	-	2500	-
19.1(Normal operation)	-	2500	-
18.2(Making and breaking capacity )	-	2500	-
18.1(Making and breaking capacity )	-	2500	-
16.3(Insulation resistance and electric strength )	-	2000	-
16(Insulation resistance and electric strength )	-	2000	-
15.3(Resistance to ageing, to harmful ingress of water and to humidity )	-	3000	-
15.2.1(Resistance to ageing, to harmful ingress of water and to humidity )	-	3000	-
15.2(Resistance to ageing, to harmful ingress of water and to humidity )	-	3000	-
15.1(Resistance to ageing, to harmful ingress of water and to humidity )	-	3000	-
15(Resistance to ageing, to harmful ingress of water and to humidity )	-	3000	-
14.6(Mechanism)	-	100	-
14.5(Mechanism)	-	100	-
14.4(Mechanism)	-	100	-
14.3(Mechanism)	-	100	-
14.2(Mechanism)	-	100	-
14.1(Mechanism)	-	100	-
13.15.2(Constructional requirements )	-	100	-
13.15.1(Constructional requirements )	-	100	-
13.15(Constructional requirements )	-	100	-
13.14(Constructional requirements )	-	100	-
13.13(Constructional requirements )	-	100	-
13.12(Constructional requirements )	-	100	-
13.11(Constructional requirements )	-	100	-
13.1(Constructional requirements )	-	100	-
13.9(Constructional requirements )	-	100	-
13.8(Constructional requirements )	-	100	-
13.7(Constructional requirements )	-	100	-
13.6(Constructional requirements )	-	100	-
13.5(Constructional requirements )	-	100	-
13.4(Constructional requirements )	-	100	-
13.3.3(Constructional requirements )	-	100	-
13.3.2(Constructional requirements )	-	100	-
13.3.1(Constructional requirements )	-	100	-
13.3(Constructional requirements )	-	100	-
13.2(Constructional requirements )	-	100	-
13.1(Constructional requirements )	-	100	-
13(Constructional requirements )	-	100	-
12.3.12(Terminals)	-	1000	-
12.3.11.b(Terminals)	-	1000	-
12.3.11.a(Terminals)	-	1000	-
12.3.10(Terminals)	-	1000	-
12.3.9(Terminals)	-	1000	-
12.3.8(Terminals)	-	1000	-
12.3.6(Terminals)	-	1000	-
12.3.1(Terminals)	-	1000	-
12.3(Terminals)	-	1000	-
12.2.12(Terminals)	-	1000	-
12.2.10(Terminals)	-	1000	-
12.2.8(Terminals)	-	1000	-
12.2.6(Terminals)	-	1000	-
12.2(Terminals)	-	1000	-
12.1(Terminals)	-	1000	-
11.4(Provision for earthing)	-	200	-
11.3(Provision for earthing)	-	200	-
11.2(Provision for earthing)	-	200	-
11.1(Provision for earthing)	-	200	-
10.7(Protection against electric shock )	-	250	-
10.6(Protection against electric shock )	-	250	-
10.5(Protection against electric shock )	-	250	-
10.4(Protection against electric shock )	-	250	-
10.3.2(Protection against electric shock )	-	250	-
10.3.1(Protection against electric shock )	-	250	-
10.3(Protection against electric shock )	-	250	-
10.2(Protection against electric shock )	-	250	-
10.1(Protection against electric shock )	-	250	-
8.1(Marking)	-	100	-
8.8(Marking)	-	100	-
8.7(Marking)	-	100	-
8.6(Marking)	-	100	-
8.5(Marking)	-	100	-
8.4(Marking)	-	100	-
8.3(Marking)	-	100	-
8.2(Marking)	-	100	-
8.1(Marking)	-	100	-
7.2(Classification)	-	100	-
7.1.8(Classification)	-	100	-
7.1.7(Classification)	-	100	-
7.1.6(Classification)	-	100	-
7.1.5(Classification)	-	100	-
7.1.4(Classification)	-	100	-
7.1.3(Classification)	-	100	-
7.1.2(Classification)	-	100	-
7.1.1(Classification)	-	100	-
7.1(Classification)	-	100	-
6.2(Ratings)	-	100	-
6.1(Ratings)	-	100	-
6(Ratings)	-	100	-
25(Resistance to Rusting)	-	300	-
12.2.6(Terminals, Qualitative)	-	1000	-
12.3.1(Terminals, Qualitative)	-	1000	-
12.3.6(Terminals, Qualitative)	-	1000	-
12.3.10(Terminals, Qualitative)	-	1000	-
13.12(Qualitative)	-	100	-
14(Mechanism)	-	100	-
21.1(Resistance to Heat)	-	200	-
24.1(Resistance of insulating material to abnormal heat, to fire and to tracking )	-	300	-
24(Resistance of insulating material to abnormal heat, to fire and to tracking )	-	300	-
23.2(Creepage distances, clearances & distance through sealing compound )	-	200	-
23.1(Creepage distances, clearances & distance through sealing compound )	-	200	-
22.7(Screws, current carrying parts and connections )	-	150	-
22.6(Screws, current carrying parts and connections )	-	150	-
12.3.7(v) Interconnection of conductors [Cl. 12.3.7])	-	1000	-

18 Oct, 2028

-
-

IS 3419 (1988)

Specification for fittings for rigid non - Metallic (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8 & 5(Visual Examination -IS:3419)	-	500	-
6.2 & 9.1- Table-1, ii(Inside Diameter of Collar for Slip type cuplers -IS:3419)	-	500	-
6.2 & 9.1- Table-1, iii(Inside Diameter of Ridge for Slip type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-1, iv(Minimum overall length for Slip type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-1, v(Minimum wall thickness for Slip type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-2, ii(Inside Diameter of Collar for Socketed type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-2, iii(Inside Diameter of Ridge for Socketed type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-2, iv(Minimum overall length (a) for Socketed type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-2, v(Minimum overall length (l) for Socketed type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-2, vi(Minimum wall thickness for Socketed type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-3, ii(Inside Diameter of Collar(d6) for Clamp type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-3, iii(Inside Diameter of Collar (d5) for Clamp type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-3, iv(Inside Diameter of Ridge for Clamp type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-3, vi(Minimum wall thickness for Clamp type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-4, ii(Outside Dameter of Normal type bend -IS:3419)	-	0	-
6.2 & 9.1- Table-4, iii(Minimum Inside Diameter of Normal Type Bend -IS:3419)	-	0	-
6.2 & 9.1- Table-4, iv(Radious(R) of Normal Type Bend -IS:3419)	-	0	-
6.2 & 9.1- Table-4, v(Length (l1) of Normal Type Bend -IS:3419)	-	0	-
6.2 & 9.1- Table-5, ii(Outside Dameter of Slip type cupling bend -IS:3419)	-	0	-
6.2 & 9.1- Table-5, iii(Minimum Inside Diameter of Slip type cupling bend -IS:3419)	-	0	-
6.2 & 9.1- Table-5, iv(Inside Diameter of collar for Slip type cupling bend -IS:3419)	-	0	-
6.2 & 9.1- Table-5, v(R- for Slip type cupling bend -IS:3419)	-	0	-
6.2 & 9.1- Table-5, vi(Y- for Slip type cupling bend -IS:3419)	-	0	-
6.2 & 9.1- Table-5, vii(l2- for Slip type cupling bend -IS:3419)	-	0	-
6.2 & 9.1- Table-6, ii(Inside Diameter of collar for Normal type Elbows -IS:3419)	-	0	-
6.2 & 9.1- Table-6, iii(Length (l) of Normal Type Elbows -IS:3419)	-	0	-
6.2 & 9.1- Table-6, iv(Radious(r) of Normal Type Elbows -IS:3419)	-	0	-
6.2 & 9.1- Table-6, v(Minimum wall thicknes of Elbows -IS:3419)	-	0	-
6.2 & 9.1- Table-7, ii(Inside Diameter of Collear for Normal type Tees -IS:3419)	-	0	-
6.2 & 9.1- Table-7, iii(Length (l) of Normal type Tees -IS:3419)	-	0	-
6.2 & 9.1- Table-7, iv(Radious(r) of Normal type Tees -IS:3419)	-	0	-
6.2 & 9.1- Table-7, v( Minimum wall thicknes of Normal type Tees -IS:3419)	-	0	-
6.2 & 9.1- Table-8, ii(Inside Diameter of Collear for socketed type Tees - IS:3419)	-	0	-
6.2 & 9.1- Table-8, iii(a - of socketed type Tees -IS:3419)	-	0	-
6.2 & 9.1- Table-8, iv(l - of socketed type Tees -IS:3419)	-	0	-
6.2 & 9.1- Table-8, v(Minimum wall thicknes of socketed type Tees -IS:3419)	-	0	-
6.2 & 9.1- Table-9, ii(B - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-9, iii(C - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-9, iv(D - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-9, v(E - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-9, vi(F(Max) - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-9, vii(F(Min) - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-9, viii(G - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-9, ix(t - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-3, iv(Minimum length for Clamp type cuplers -IS:3419)	-	0	-
10(Resistance to Heat -IS:3419)	-	1000	-
11(Resistance to Burning - IS 3419)	-	500	-
12(Moisture Absorption - IS 3419)	-	500	-
13.2 &13.3(Resistance to chemival action in Acid solution - IS 3419)	-	1500	-
13.2 &13.3(Resistance to chemival action in Alkaline solution - IS 3419)	-	1500	-
14.1(Copper Test - IS 3419)	-	1000	-
15, 15.3(Resistance to Oil - IS 3419)	-	750	-
15,15.4(Resistance to Oil - IS 3419)	-	750	-
16- Appendix-A(Resistance to Impact -IS 3419)	-	500	-
17.2(Electric Strength - IS 3419)	-	500	-
17.3(Insulation Resistance - IS 3419)	-	500	-

18 Oct, 2028

-
-

IS 14927 : Part 2 (2001)

Cable Trunking and Ducting Systems for Electrical Installations : Part 2 Cable Trunking and Ducting Systems Intended for Mounting on Walls or Ceiling

up to & including 100 x 50 mm

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.2(Marking (as per Cl 7.2 of IS:14927(Pt-I ):2001))	-	0	-
8.1( Dimensions (As per cl.8.1 of IS 14927(Pt-1) : 2001))	-	0	-
8.2(Dimensions (As per cl.8.2 of IS 14927(Pt-1) : 2001)	-	0	-
8.3, table 2( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8.3, table 2( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8.3, table 2( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
9.1(Construction ( As per Cl. 9.1 of IS 14927(Pt-1):2001))	-	0	-
9.1(Construction)	-	0	-
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9.3(Construction ( As per Cl. 9.3 of IS 14927(Pt-1):2001))	-	0	-
9.3.1(Construction ( As per Cl. 9.3.1 of IS 14927(Pt-1):2001))	-	0	-
9.3.2, table 3(Construction ( As per Cl. 9.3.2, Table-3 of IS 14927(Pt-1):2001))	-	0	-
9.4.1(Construction [Access to Live Parts (As per Cl. 9.4.1 of IS 14927(Pt-1):2001)])	-	0	-
9.5(Construction (As per Cl. 9.5 of IS 14927(Pt-1):2001))	-	0	-
9.6.2(Construction [Membranes (As per Cl.9.6.2 of IS: 14927 (Pt-1):2001)])	-	0	-
9.6.4(Construction [Membranes (As per Cl.9.6.4 of IS: 14927 (Pt-1):2001)])	-	0	-
9.7.2, table 4(Construction [Glands (As per Cl.9.7.2 and Table-4 of IS: 14927 (Pt-1):2001)] )	-	0	-
10(Mechanical Properties )	-	10000	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10.3(Impact Test [ Cl.10.3 ])	-	0	-
10.3.4(Impact Test (As per Cl. 10.3.4 of IS: 14927(Pt-1):2001) )	-	0	-
10.4(Linear Deflection Test [ Cl.10.4 ])	-	0	-
10.5(External load Test [ Cl.10.5 ])	-	0	-
11.1.1(Resistance to flame propagation (As per Cl. 11.1.1))	-	0	-
11.1.1(Resistance to flame propagation (As per Cl. 11.1.1))	-	0	-
12.2(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	0	-
12.2(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	0	-
12.3(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
12.3(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
12.3(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
13(External Influences )	-	0	-
7(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.101(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.102(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7(Marking (as per Cl 7.2 of IS:14927(Pt-I ):2001))	-	0	-
8( Dimensions (As per cl.8.1 of IS 14927(Pt-1) : 2001))	-	0	-
8(Dimensions (As per cl.8.2 of IS 14927(Pt-1) : 2001)	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
9(Construction ( As per Cl. 9.1 of IS 14927(Pt-1):2001))	-	0	-
9.1.101(Construction)	-	0	-
9(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.3 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.3.1 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.3.2, Table-3 of IS 14927(Pt-1):2001))	-	0	-
9(Construction [Access to Live Parts (As per Cl. 9.4.1 of IS 14927(Pt-1):2001)])	-	0	-
9(Construction (As per Cl. 9.5 of IS 14927(Pt-1):2001))	-	0	-
9(Construction [Membranes (As per Cl.9.6.2 of IS: 14927 (Pt-1):2001)])	-	0	-
9(Construction [Membranes (As per Cl.9.6.4 of IS: 14927 (Pt-1):2001)])	-	0	-
9(Construction [Glands (As per Cl.9.7.2 and Table-4 of IS: 14927 (Pt-1):2001)] )	-	0	-
10(Mechanical Properties )	-	10000	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10(Impact Test [ Cl.10.3 ])	-	0	-
10(Impact Test (As per Cl. 10.3.4 of IS: 14927(Pt-1):2001) )	-	0	-
10(Linear Deflection Test [ Cl.10.4 ])	-	0	-
10(External load Test [ Cl.10.5 ])	-	0	-
11(Resistance to flame propagation (As per Cl. 11.1.1))	-	0	-
11(Resistance to flame propagation (As per Cl. 11.1.1))	-	0	-
12(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	0	-
12(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	0	-
12(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
12(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
12(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
13(External Influences )	-	0	-
4(General Requirements)	-	500	-
5(General Conditions for test)	-	500	-
7(Marking)	-	500	-
8(Dimensions)	-	1000	-
9(Construction)	-	1500	-
10(Mechanical Properties)	-	10000	-
11(Resistance to flame propagation)	-	1000	-
12(Electrical characteristics)	-	3000	-
13(External Influences)	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.2(Marking (as per Cl 7.2 of IS:14927(Pt-I ):2001))	-	0	-
8.1( Dimensions (As per cl.8.1 of IS 14927(Pt-1) : 2001))	-	0	-
8.2(Dimensions (As per cl.8.2 of IS 14927(Pt-1) : 2001)	-	0	-
8.3, table 2( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8.3, table 2( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8.3, table 2( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
9.1(Construction ( As per Cl. 9.1 of IS 14927(Pt-1):2001))	-	0	-
9.1(Construction)	-	0	-
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9.3(Construction ( As per Cl. 9.3 of IS 14927(Pt-1):2001))	-	0	-
9.3.1(Construction ( As per Cl. 9.3.1 of IS 14927(Pt-1):2001))	-	0	-
9.3.2, table 3(Construction ( As per Cl. 9.3.2, Table-3 of IS 14927(Pt-1):2001))	-	0	-
9.4.1(Construction [Access to Live Parts (As per Cl. 9.4.1 of IS 14927(Pt-1):2001)])	-	0	-
9.5(Construction (As per Cl. 9.5 of IS 14927(Pt-1):2001))	-	0	-
10(Mechanical Properties )	-	10000	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10.3(Impact Test [ Cl.10.3 ])	-	0	-
10.3.4(Impact Test (As per Cl. 10.3.4 of IS: 14927(Pt-1):2001) )	-	0	-
11.1.1(Resistance to flame propagation (As per Cl. 11.1.1))	-	0	-
11.1.1(Resistance to flame propagation (As per Cl. 11.1.1))	-	0	-
12.2(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	0	-
12.2(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	0	-
12.3(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
12.3(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
12.3(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
7(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.101(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.102(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7(Marking (as per Cl 7.2 of IS:14927(Pt-I ):2001))	-	0	-
8( Dimensions (As per cl.8.1 of IS 14927(Pt-1) : 2001))	-	0	-
8(Dimensions (As per cl.8.2 of IS 14927(Pt-1) : 2001)	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
9(Construction ( As per Cl. 9.1 of IS 14927(Pt-1):2001))	-	0	-
9.1.101(Construction)	-	0	-
9(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.3 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.3.1 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.3.2, Table-3 of IS 14927(Pt-1):2001))	-	0	-
9(Construction [Access to Live Parts (As per Cl. 9.4.1 of IS 14927(Pt-1):2001)])	-	0	-
9(Construction (As per Cl. 9.5 of IS 14927(Pt-1):2001))	-	0	-
10(Mechanical Properties )	-	10000	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10(Impact Test [ Cl.10.3 ])	-	0	-
10(Impact Test (As per Cl. 10.3.4 of IS: 14927(Pt-1):2001) )	-	0	-
11(Resistance to flame propagation (As per Cl. 11.1.1))	-	0	-
11(Resistance to flame propagation (As per Cl. 11.1.1))	-	0	-
12(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	0	-
12(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	0	-
12(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
12(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
12(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
4(General Requirements)	-	500	-
5(General Conditions for test)	-	500	-
7(Marking)	-	500	-
8(Dimensions)	-	1000	-
9(Construction)	-	1500	-
10(Mechanical Properties)	-	10000	-
11(Resistance to flame propagation)	-	1000	-
12(Electrical characteristics)	-	3000	-
10(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10(Mechanical Properties )	-	0	-
10.3(Impact Test [ Cl.10.3 ])	-	1000	-
10(Mechanical Properties )	-	0	-
9(Construction)	-	500	-
10(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	10000	-
9.6.2(Construction [Membranes (As per Cl.9.6.2 of IS: 14927 (Pt-1):2001)])	-	0	-
9.6.4(Construction [Membranes (As per Cl.9.6.4 of IS: 14927 (Pt-1):2001)])	-	0	-
9.7.2, table 4(Construction [Glands (As per Cl.9.7.2 and Table-4 of IS: 14927 (Pt-1):2001)] )	-	0	-
10.4(Linear Deflection Test [ Cl.10.4 ])	-	0	-
9(Construction [Membranes (As per Cl.9.6.2 of IS: 14927 (Pt-1):2001)])	-	0	-
9(Construction [Membranes (As per Cl.9.6.4 of IS: 14927 (Pt-1):2001)])	-	0	-
9(Construction [Glands (As per Cl.9.7.2 and Table-4 of IS: 14927 (Pt-1):2001)] )	-	0	-
10(Linear Deflection Test [ Cl.10.4 ])	-	0	-

18 Oct, 2028

-
-

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

4950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	500	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	300	-
6.3(Standard Mark on Conduit)	-	250	-
7.1.1(Maximum and minimum outside diameter of socket)	-	500	-
7.1.1 Table-2(Length of Socket end)	-	300	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	500	-
7.2(Minimum inside diameter of conduit)	-	500	-
7.3(Length of conduit)	-	250	-
7.4(Unifomity of The wall Thickness)	-	250	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	250	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1000	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	1000	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	2500	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1500	-
10(Resistance to Heat -Ball presure test)	-	1000	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	1000	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1500	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	1500	-

18 Oct, 2028

-
-

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

8900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	250	-
7.1 Table-1(Dimensional measurement of wires)	-	1000	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	1000	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	0	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	0	-
9.1(Stranding)	-	0	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	500	-
9.3(Direction of Lay)	-	0	-
9.4(Multiple layers of wires)	-	0	-
11(Packing and Marking)	-	0	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	1250	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	1250	-
12.3 Table 1(Elongation Test- Before Stranding)	-	1000	-
12.3 Table 1(Elongation Test- After Stranding)	-	1000	-
12.4 Table 1(Resistance of Aluminium wire)	-	1000	-
9.2(Lay Ratio 24 wire layer)	-	500	-
9.2(Lay Ratio 18 wire layer)	-	500	-
9.2(Lay Ratio 12 wire layer)	-	500	-
9.2(Lay Ratio 3/6 wire layer)	-	500	-

18 Oct, 2028

-
-

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	350	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	350	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	350	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	350	-
10 (elec)(Stranding)	-	0	-
10 (elec)(Stranding)	-	0	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	500	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	500	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	500	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	500	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	250	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	250	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	250	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	250	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	750	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	750	-
13.7.2 (elec)(Mass of Zinc coating)	-	750	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	750	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	250	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	250	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	250	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	250	-

18 Oct, 2028

-
-

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	1250	-
12.3, Table-1(Breaking load before stranding)	-	1250	-
12.3, Table-1(Breaking load after stranding)	-	1250	-
12.4(Wrapping test)	-	1000	-
12.5, Table 1(Resistance test)	-	1250	-
12.6, Table 3(Measurement of lay ratio)	-	1000	-
9.3(Stranding)	-	0	-
6(Freedom from defects)	-	250	-

18 Oct, 2028

-
-

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	0	-
4.1.1(INSULATION : General Purjose Insulaiion)	-	0	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	0	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
6.1(MATERIALS : ARMGURING)	-	0	-
6.2(MATERIALS : ARMGURING)	-	0	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	0	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	0	-
8.1(CONSTRUCTION : CONDUCTOR)	-	0	-
8.2(CONSTRUCTION : CONDUCTOR)	-	0	-
9.1(INSULATION )	-	0	-
9.2(INSULATION : Thickness of Insulation)	-	500	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	0	-
9.4(INSULATION : Application of Insulation)	-	0	-
10.1(CORE IDENTIFICATION)	-	0	-
10.2(CORE IDENTIFICATION)	-	0	-
10.3(CORE IDENTIFICATION)	-	0	-
10.3.1(Arrangement of Marking)	-	0	-
11.1(LAYING UP OF CORES)	-	0	-
11.2(LAYING UP OF CORES)	-	0	-
12.1(INNER SHEATH)	-	0	-
12.2(INNER SHEATH)	-	0	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	250	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	250	-
13.1.1(ARMOURING : Application)	-	0	-
13.1.2(Armouring: Coverage )	-	250	-
13.1.3(ARMOURING : Direction of lay )	-	0	-
13.2(ARMOURING : Type of Armour)	-	0	-
13.2.1(ARMOURING : Type of Armour)	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	250	-
13.3(Armouring : Dimensions -Formed wire )	-	250	-
13.4(ARMOURING : Joints)	-	0	-
13.5.1(ARMOURING : Resistance)	-	500	-
13.5.2(ARMOURING : Resistance)	-	500	-
13.6 a)(ARMOURING: Tensile Strength)	-	250	-
13.6 b)(ARMOURING: Elongation )	-	250	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	250	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	250	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	350	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	350	-
13.6 g)(ARMOURING: Resistivity)	-	350	-
14.1(OUTER SHEATH)	-	0	-
14.2(OUTER SHEATH)	-	0	-
14.3(OUTER SHEATH : Colour )	-	0	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	250	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	250	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	500	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	350	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	350	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	250	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	750	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	500	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	500	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	500	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	250	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	250	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	1000	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	1000	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	0	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	0	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	0	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	0	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	250	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	250	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
15.1 d)4)(Hot deformation : Insulation )	-	500	-
15.1 d)4)(Hot deformation : Sheath )	-	500	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	1000	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	1000	-
15.1 d)6)(Heat shock test- Insulation )	-	250	-
15.1 d)6)(Heat shock test- sheath )	-	250	-
15.1 d)7)(Thermal stability- insulation )	-	350	-
15.1 d)7)(Thermal stability- Sheath )	-	350	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	750	-
15.1 e)(Insulation resistance test : IR Constant )	-	0	-
15.1 f)(High voltage test ( water immersion test ))	-	750	-
15.1 g)(High voltage test at room temperature)	-	500	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	500	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	500	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	500	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	500	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	350	-
16.1(DETAILS OF TESTS : General)	-	0	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	0	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	0	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	750	-
16.4(Flammability Test)	-	1000	-
16.5(Oxygen Index Test)	-	1500	-
16.6(Flame Retardance Test on Single Cables)	-	1000	-
16.7(Flame Retardance Test on Bunched Cables)	-	6000	-
16.9(Test for Halogen Acid Gas Evolution)	-	2500	-
16.1(Temperature Index)	-	1500	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	0	-
17.2(IDENTIFICATION : Cable Identification)	-	0	-
17.2.1(IDENTIFICATION : Cable Identification)	-	0	-
17.3(IDENTIFICATION : Cable Code)	-	0	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	0	-
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	0	-
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	0	-
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	0	-
16.4(Flammability Test- Un affected portion)	-	0	-
16.4(Flammability Test- Period of Burning)	-	0	-
9.3(Minimum Thickness of Reduce core insulation)	-	0	-
9.2(Thickness of Reduce core insulation)	-	0	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	0	-
Cl No. 16.10(Smoke density test)	-	6000	-
Cl No. 16.8(Test for specific optical density of smoke)	-	2500	-
Table 4(Copper purity test)	-	750	-

18 Oct, 2028

-
-

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

38500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	0	-
4(INSULATION : MATERIALS)	-	0	-
5.1(FILLER AND INNER SHEATH)	-	0	-
5.2(FILLER AND INNER SHEATH)	-	0	-
6(ARMOURING)	-	0	-
7(OUTER SHEATH)	-	0	-
8.1(CONDUCTOR: CONSTRUCTION)	-	0	-
8.2(PROTECTIVE BARRIER)	-	0	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	0	-
9.1(Insulation Applied by extrusicn)	-	0	-
9.2(Thickness of Insulation - Average)	-	350	-
9.3(Thickness of Insulation - Minimum)	-	350	-
9.4(Application of Insulation)	-	0	-
10.1(Core Identification)	-	0	-
10.2(Core Identification- Neutral)	-	0	-
10.3(Core Identification by number )	-	0	-
10.4(Core Identification by number - Neutral )	-	0	-
11(LAVING UP OF CORES)	-	0	-
12.1 & 12.2(Inner sheath : Application)	-	0	-
12.3(Thickness of Inner Sheath)	-	250	-
13.1(Armouring: Application)	-	0	-
13.1.2(Armouring: Coverage )	-	250	-
13.1.3(Armouring: Direction of Lay )	-	0	-
13.2(Type of armour )	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	250	-
13.3(Armouring : Dimensions -Formed wire )	-	250	-
13.4(Armour: Joint)	-	0	-
13.5(Armouring : Resistance Test)	-	500	-
13.6 a)(ARMOURING: Tensile Strength)	-	350	-
13.6 b)(ARMOURING: Elongation )	-	350	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	350	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	350	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	350	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	350	-
13.6 g)(ARMOURING: Resistivity)	-	350	-
14.1(Outer Sheath : Application)	-	0	-
14.2(Colour of outer sheath)	-	0	-
14.3(Thickness of outer sheath - AVERAGE)	-	250	-
14.3(Thickness of outer sheath - minimum)	-	250	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	350	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	350	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	350	-
15.1 a) iii)(Wrapping test (for aluminium))	-	350	-
15.1 a) iv)(Resistance test - Main conductor)	-	750	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	500	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	500	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	500	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	1000	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	1000	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	500	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	500	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	500	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	3000	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	250	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	250	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	1000	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	1000	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	2000	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	250	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
15.1 e) v) (Sheath : Hot deformation)	-	750	-
15.1 e) vi) (Sheath : Heat shock test)	-	350	-
15.1 e) vii) (Sheath : Thermalstability)	-	500	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	500	-
16.2(HIGH VOLTAGE TEST )	-	1000	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	750	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	750	-
16.9(Oxygen Index Test)	-	1500	-
16.1(Flame Retardance Test on Single Cables)	-	1000	-
16.11(Flame Retardance Test on Bunched Cables)	-	7500	-
16.13(Test for Halogen Acid Gas Evolution)	-	2500	-
16.14(Temperature Index)	-	1500	-
Cl No. 16.15(Smoke density test)	-	4000	-
17.1(Manufacturer'. identification)	-	0	-
17.2(cable Indentification )	-	0	-
17.3(cable Code )	-	0	-
15.4 (a)(Cold bend)	-	500	-
15.4 (b)(Cold impact)	-	500	-
Table 4(Copper purity test)	-	750	-

18 Oct, 2028

-
-

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

32500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Cable code)	-	0	-
11.2(Legibility)	-	0	-
11.1(Durability)	-	0	-
11(Identification)	-	0	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	4500	-
10.4(Flammability test- Unaffected portion)	-	500	-
10.4(Flammability test-Burning after flame removal)	-	500	-
table 1 e) 3) (IR constant- max. Temp)	-	250	-
table 1 e) 3) (IR constant- Room temp )	-	250	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	500	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	500	-
10.2(HV (room temperature))	-	500	-
10.1(HV (water immersion))	-	750	-
10.8(Smoke density rating)	-	3000	-
10.6(Halogen evolution)	-	3000	-
10.7(Temperature index)	-	1500	-
10.5(Oxygen index)	-	1500	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	500	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	500	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	750	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	750	-
Table 1(Category Code)	-	0	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	250	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	250	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	450	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	450	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	250	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	250	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	250	-
Table 1 iii) d) 4)(Cracks Observed)	-	0	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	250	-
Table 1 iii) c) 4)(Cracks Observed)	-	0	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	1000	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	2000	-
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	250	-
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	250	-
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	1000	-
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	1000	-
Table 1 iii) d) 3)(Sheath- TS variation)	-	0	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	0	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	250	-
Table 1 iii) c) 1)(Elongation (Without ageing))	-	250	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	1000	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	1000	-
Table 1 iii) c) 3)(TS variation)	-	0	-
Table 1 iii) c) 3)(Elongation variation)	-	0	-
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	0	-
8.3(Thickness of Sheath)	-	250	-
5.2(Application )	-	0	-
5.3(Thickness of Insulation)	-	250	-
9.1(Ovality)	-	150	-
9(Overall dimensions)	-	150	-
10.11(Per sulphate test (for tinned Cu cable only))	-	500	-
4.2(Conductor resistance test)	-	500	-
4.1(Wrapping test (for Al))	-	150	-
4.1(Tensile test (for Al)- After Stranding)	-	150	-
4.1(Tensile test (for Al)-Before Stranding)	-	150	-
4.1(Annealing test (for copper))	-	300	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	0	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	0	-
12(CONSTRUCTION Core Identification)	-	0	-
8.1(Sheath Material )	-	0	-
7(Binder Tape)	-	0	-
6.2(Filler)	-	0	-
5.1(Insulation)	-	0	-
4.4(Joints in Conductor)	-	0	-
4.1(Conductor - Material)	-	0	-
Table 2, IS 8130(No fo wire in a conductor)	-	0	-
Table 4(Copper purity test)	-	750	-
(Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5))	-	0	-
(Cl.6.1.3 of IS 8130:2013)( Flexible Conductors (Classes 5))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	0	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	0	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	0	-
4, IS 8130(Construction of conductor)	-	0	-
8.3(Minimum thickness of Sheath)	-	0	-
8.3(Avarage thickness of Sheath)	-	0	-
5.3(Minimum thickness of insulation)	-	0	-
5.3(Avarage thickness of insulation)	-	0	-

18 Oct, 2028

-
-

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

23500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	0	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	0	-
5.1(Insulation)	-	0	-
6.1(Flexibility class)	-	0	-
6.2(Compactness)	-	0	-
6.2(No of strands)	-	0	-
6.2(Surface)	-	0	-
6.3(Protective barrier)	-	0	-
6.4(size of street lighting conductor)	-	0	-
6.5(Size of messenger conductor )	-	0	-
6.6(Joints in messenger conductor )	-	0	-
6.6(Direction of outer layer)	-	0	-
7.1(Insulation)	-	0	-
7.2( Thickness of insulation)	-	500	-
7.3(Tolerance on thickness of insulation )	-	0	-
7.4(Aplication of the insulation )	-	0	-
7.5(Colour of the insulation )	-	0	-
8.1(Core identification)	-	0	-
8.2(Core identification)	-	0	-
8.3(Identification by other means)	-	0	-
9.1(Assembly (Laying up))	-	0	-
9.2(Assembly (Laying up))	-	0	-
9.3(Direction of lay)	-	0	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	500	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	250	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	500	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	750	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	750	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	500	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	1500	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	1500	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	500	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	500	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	400	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	100	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	3000	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	1000	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	1000	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	1500	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	1000	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	2500	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	750	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	750	-
10.1 g)(High voltage test - IS10810:Part 45)	-	750	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	750	-

18 Oct, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

TVS LABS

A-5/16A, A-Block, Third & Fourth Floor, Jhilmil Industrial Area, Shahdara, Delhi, Shahdara, Delhi, 110095

9116653300 tvslabs@gmail.com

Scope List