BIS - LIMS (Laboratory Information Management System)

National Research and Technology Consortium (NRTC), Parwanoo

HPCED Building, Department of industries complex, Sector-1, Parwanoo, Solan, Himachal Pradesh, 173220

9816034484 nrtcpwn@gmail.com

Scope List

Reset

24 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

30000 View breakup
-

Clause No.	Exclusion	Remark
12(Charging of metal-ion batteries)	-	included
6(Classification- IS 302-1)	-	included
5(General conditions for the tests)	-	included
11.8(Temperature rise)	-	included
11.7(Duration corresponding)	-	included
11.6(Combined appliances)	-	included
11.5(Motor-operated appliances)	-	included
11.4(Heating appliances)	-	included
8.1.5(Live parts of built-in appliances)	-	included
18(Endurance)	-	included
17(Overload protection of transformers and associated circuits)	-	included
16(Leakage current and electric strength)	-	included
4(General requirement)	-	included
32.1(Radiation Toxicity and Similar Hazards)	-	included
31(Resistance to Rusting)	-	included
30.2(Needle Flame Test)	-	included
30.2(Glow Wire Test)	-	included
30.1(Ball pressure test)	-	included
29(clearance, creepage distances and solid insulation)	-	included
28(Screw test and connections)	-	included
27.1(Provision for Earthing, IS 302-1)	-	included
26(Terminals for external conductors)	-	included
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	included
24(Components)	-	included
23.1(Internal Wiring, IS 302-1)	-	included
22.1(Construction, IS 302-1)	-	included
21.1(Mechanical Strength, IS 302-1)	-	included
20.1(Stability & Mechanical Hazards, IS 302-1)	-	included
19(Abnormal Operation)	-	included
18(Endurance)	-	included
17(Over Load Protection of Transformers and associated circuits)	-	included
16.3(Electric Strength (after clause 15 and 16.2))	-	included
16.2(Leakage Current (after Clause 15))	-	included
16.1(General)	-	included
16.0(General)	-	included
15.3(Humidity Test)	-	included
15.2(Spillage Test)	-	included
15.1(Ingress Protection test other than IPX0 (IP test))	-	included
15.0(Moisture resistance)	-	included
14(Transient Over Voltages)	-	included
13.3(Electric Strength at operating temperature)	-	included
13.2(Leakage current at operating temperature)	-	included
13(Leakage current and electric strength at operating temperature)	-	included
11.3(Heating)	-	included
11.2(General)	-	included
11.1(General)	-	included
10.2(Current input)	-	included
10.1(Power input)	-	included
9(Starting of motor operation test requirements and tests)	-	included
8.1.4(Protection against live parts against protective impedance)	-	included
8.1.3(Protection against live parts in visible glowing heating elements)	-	included
8.1.2(Protection against live parts in openings)	-	included
8.1.1(Protection against live parts in all positions)	-	included
7(Marking and instructions)	-	included
A.2(Earth continuity test)	-	included
Annex C(Ageing test on motors)	-	included
Annex D(Thermal motor protectors)	-	included
15.2(Moisture resistance)	-	included
19.17(Abnormal Operation, IS 302-1)	-	included
20.2(Stability & Mechanical Hazards, IS 302-1)	-	included
21.2(Mechanical Strength, IS 302-1)	-	included
21.3(Mechanical Strength, IS 302-1)	-	included
22.5(Construction)	-	included
22.6(Construction, IS 302-1)	-	included
22.11(Construction, IS 302-1)	-	included
22.16(Construction)	-	included
22.32(Construction, IS 302-1)	-	included
22.42(Construction)	-	included
23.3(Internal Wiring, IS 302-1)	-	included
25.6(Supply connection and external flexible cords, IS 302-1)	-	included
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	included
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	included
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	included
26.5(Terminals for external conductors)	-	included
27.5(Provision for Earthing, IS 302-1)	-	included
28.1(Screws and connections)	-	included
22.2(Construction, IS 302-1)	-	included
22.3(Construction, IS 302-1)	-	included
B.22.4(Construction, IS 302-1)	-	included
B.22.5(Construction, IS 302-1)	-	included
7.1(Marking- IS 302-1)	-	included
7.1(Marking- IS 302-1)	-	included
7.1(Marking- IS 302-1)	-	included
7.1(Marking- IS 302-1)	-	included
7.1(Marking- IS 302-1)	-	included
7.1(Marking- IS 302-1)	-	included
7.1(Marking- IS 302-1)	-	included
7.3(Marking- IS 302-1)	-	included
7.4(Marking- IS 302-1)	-	included
7.5(Marking- IS 302-1)	-	included
7.6(Marking- IS 302-1)	-	included
7.7(Marking- IS 302-1)	-	included
7.8(Marking- IS 302-1)	-	included
7.9(Marking- IS 302-1)	-	included
7.1O(Marking- IS 302-1)	-	included
7.11(Marking- IS 302-1)	-	included
7.12(Marking- IS 302-2-15)	-	included
7.13(Marking- IS 302-1)	-	included
6(Classification- IS 302-1)	-	included
7.15(Marking- IS 302-1)	-	included
11(Heating, IS 302-1, Table -3)	-	included
11(Heating, IS 302-1, Table -3)	-	included
11(Heating, IS 302-1, Table -3)	-	included
11(Heating, IS 302-1, Table -3)	-	included
11(Heating, IS 302-1, Table -3)	-	included
11(Heating, IS 302-1, Table -3)	-	included
11(Heating, IS 302-1)	-	included
19.7(Abnormal Operation, IS 302-1)	-	included
19.8(Abnormal Operation, IS 302-1)	-	included
19.9(Abnormal Operation, IS 302-1)	-	included
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	included
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	included
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	included
19.17(Abnormal Operation, IS 302-1)	-	included
22.7(Construction, IS 302-1)	-	included
22.9(Construction, IS 302-1)	-	included
22.10(Construction, IS 302-1)	-	included
22.12(Construction, IS 302-1)	-	included
22.14(Construction, IS 302-1)	-	included
22.15(Construction, IS 302-1)	-	included
22.18(Construction, IS 302-1)	-	included
22.19(Construction, IS 302-1)	-	included
22.21(Construction, IS 302-1)	-	included
22.22(Construction, IS 302-1)	-	included
22.24(Construction, IS 302-1)	-	included
22.25(Construction, IS 302-1)	-	included
22.28(Construction, IS 302-1)	-	included
22.31(Construction, IS 302-1)	-	included
22.34(Construction, IS 302-1)	-	included
22.35(Construction, IS 302-1)	-	included
22.36(Construction, IS 302-1)	-	included
22.37(Construction, IS 302-1)	-	included
22.38(Construction, IS 302-1)	-	included
22.40(Construction, IS 302-1)	-	included
22.41(Construction, IS 302-1)	-	included
22.43(Construction, IS 302-1)	-	included
22.43(Construction, IS 302-1)	-	included
22.44(Construction, IS 302-1)	-	included
22.49(Construction, IS 302-1)	-	included
22.54(Construction, IS 302-1)	-	included
22.55(Construction, IS 302-1)	-	included
22.58(Construction, IS 302-1)	-	included
22.59(Construction, IS 302-1)	-	included
22.60(Construction, IS 302-1)	-	included
22.61(Construction, IS 302-1)	-	included
23.2(Internal Wiring, IS 302-1)	-	included
23.4(Internal Wiring, IS 302-1)	-	included
23.6(Internal Wiring, IS 302-1)	-	included
23.7(Internal Wiring, IS 302-1)	-	included
23.8(Internal Wiring, IS 302-1)	-	included
23.9(Internal Wiring, IS 302-1)	-	included
23.10(Internal Wiring, IS 302-1)	-	included
25.1(Supply connection and external flexible cords, IS 302-1)	-	included
25.2(Supply connection and external flexible cords, IS 302-1)	-	included
25.3(Supply connection and external flexible cords, IS 302-1)	-	included
25.4(Supply connection and external flexible cords, IS 302-1)	-	included
25.5(Supply connection and external flexible cords, IS 302-1)	-	included
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	included
25.10(Supply Connection and External Flexible Cords, IS 302-1)	-	included
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	included
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	included
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	included
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	included
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	included
25.20(Supply Connection and External Flexible Cords, IS 302-1)	-	included
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	included
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	included
25.23(Supply Connection and External Flexible Cords, IS 302-1)	-	included
25.24(Supply Connection and External Flexible Cords, IS 302-1)	-	included
27.2(Provision for Earthing, IS 302-1)	-	included
27.3(Provision for Earthing, IS 302-1)	-	included
27.4(Provision for Earthing, IS 302-1)	-	included
27.6(Provision for Earthing, IS 302-1)	-	included
32.1(Radiation, toxicity and similar hazards, is 302-1)	-	included
32.2(Radiation, toxicity and similar hazards, is 302-1)	-	included
12(Charging of metal-ion batteries)	-	included
6(Classification- IS 302-1)	-	included
5(General conditions for the tests)	-	included
11.8(Temperature rise)	-	included
11.7(Duration corresponding)	-	included
11.6(Combined appliances)	-	included
11.5(Motor-operated appliances)	-	included
11.4(Heating appliances)	-	included
8.1.5(Live parts of built-in appliances)	-	included
18(Endurance)	-	included
17(Overload protection of transformers and associated circuits)	-	included
16(Leakage current and electric strength)	-	included
4(General requirement)	-	included
31(Resistance to Rusting)	-	included
30.2(Needle Flame Test)	-	included
30.2(Glow Wire Test)	-	included
30.1(Ball pressure test)	-	included
29(clearance, creepage distances and solid insulation)	-	included
28(Screw test and connections)	-	included
27.1(Provision for Earthing, IS 302-1)	-	included
26(Terminals for external conductors)	-	included
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	included
23.1(Internal Wiring, IS 302-1)	-	included
22.1(Construction, IS 302-1)	-	included
21.1(Mechanical Strength, IS 302-1)	-	included
20.1(Stability & Mechanical Hazards, IS 302-1)	-	included
19(Abnormal Operation)	-	included
18(Endurance)	-	included
17(Over Load Protection of Transformers and associated circuits)	-	included
16.3(Electric Strength (after clause 15 and 16.2))	-	included
16.2(Leakage Current (after Clause 15))	-	included
16.1(General)	-	included
16.0(General)	-	included
15.3(Humidity Test)	-	included
15.2(Spillage Test)	-	included
15.1(Ingress Protection test other than IPX0 (IP test))	-	included
15.0(Moisture resistance)	-	included
14(Transient Over Voltages)	-	included
13.3(Electric Strength at operating temperature)	-	included
13.2(Leakage current at operating temperature)	-	included
13(Leakage current and electric strength at operating temperature)	-	included
11.3(Heating)	-	included
11.2(General)	-	included
11.1(General)	-	included
10.2(Current input)	-	included
10.1(Power input)	-	included
9(Starting of motor operation test requirements and tests)	-	included
8.1.4(Protection against live parts against protective impedance)	-	included
8.1.3(Protection against live parts in visible glowing heating elements)	-	included
8.1.2(Protection against live parts in openings)	-	included
8.1.1(Protection against live parts in all positions)	-	included
7(Marking and instructions)	-	included
A.2(Earth continuity test)	-	included
Annex C(Ageing test on motors)	-	included
Annex D(Thermal motor protectors)	-	included
15.2(Moisture resistance)	-	included
19.17(Abnormal Operation, IS 302-1)	-	included
20.2(Stability & Mechanical Hazards, IS 302-1)	-	included
21.2(Mechanical Strength, IS 302-1)	-	included
21.3(Mechanical Strength, IS 302-1)	-	included
22.5(Construction)	-	included
22.6(Construction, IS 302-1)	-	included
22.11(Construction, IS 302-1)	-	included
22.16(Construction)	-	included
22.42(Construction)	-	included
23.3(Internal Wiring, IS 302-1)	-	included
25.6(Supply connection and external flexible cords, IS 302-1)	-	included
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	included
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	included
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	included
26.5(Terminals for external conductors)	-	included
27.5(Provision for Earthing, IS 302-1)	-	included
28.1(Screws and connections)	-	included
22.2(Construction, IS 302-1)	-	included
22.3(Construction, IS 302-1)	-	included
B.22.4(Construction, IS 302-1)	-	included
B.22.5(Construction, IS 302-1)	-	included
7.1(Marking- IS 302-1)	-	included
7.1(Marking- IS 302-1)	-	included
7.1(Marking- IS 302-1)	-	included
7.1(Marking- IS 302-1)	-	included
7.1(Marking- IS 302-1)	-	included
7.1(Marking- IS 302-1)	-	included
7.1(Marking- IS 302-1)	-	included
7.3(Marking- IS 302-1)	-	included
7.4(Marking- IS 302-1)	-	included
7.5(Marking- IS 302-1)	-	included
7.6(Marking- IS 302-1)	-	included
7.7(Marking- IS 302-1)	-	included
7.8(Marking- IS 302-1)	-	included
7.9(Marking- IS 302-1)	-	included
7.1O(Marking- IS 302-1)	-	included
7.11(Marking- IS 302-1)	-	included
7.12(Marking- IS 302-2-15)	-	-
7.13(Marking- IS 302-1)	-	-
6(Classification- IS 302-1)	-	-
7.15(Marking- IS 302-1)	-	-
11(Heating, IS 302-1, Table -3)	-	-
11(Heating, IS 302-1, Table -3)	-	-
11(Heating, IS 302-1, Table -3)	-	-
11(Heating, IS 302-1, Table -3)	-	-
11(Heating, IS 302-1, Table -3)	-	-
11(Heating, IS 302-1, Table -3)	-	-
11(Heating, IS 302-1)	-	-
19.7(Abnormal Operation, IS 302-1)	-	-
19.8(Abnormal Operation, IS 302-1)	-	-
19.9(Abnormal Operation, IS 302-1)	-	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	-
19.17(Abnormal Operation, IS 302-1)	-	-
22.7(Construction, IS 302-1)	-	-
22.9(Construction, IS 302-1)	-	-
22.10(Construction, IS 302-1)	-	-
22.12(Construction, IS 302-1)	-	-
22.14(Construction, IS 302-1)	-	-
22.15(Construction, IS 302-1)	-	-
22.18(Construction, IS 302-1)	-	-
22.19(Construction, IS 302-1)	-	-
22.21(Construction, IS 302-1)	-	-
22.22(Construction, IS 302-1)	-	-
22.24(Construction, IS 302-1)	-	-
22.25(Construction, IS 302-1)	-	-
22.28(Construction, IS 302-1)	-	-
22.31(Construction, IS 302-1)	-	-
22.34(Construction, IS 302-1)	-	-
22.35(Construction, IS 302-1)	-	-
22.36(Construction, IS 302-1)	-	-
22.37(Construction, IS 302-1)	-	-
22.38(Construction, IS 302-1)	-	-
22.40(Construction, IS 302-1)	-	-
22.41(Construction, IS 302-1)	-	-
22.43(Construction, IS 302-1)	-	-
22.43(Construction, IS 302-1)	-	-
22.44(Construction, IS 302-1)	-	-
22.49(Construction, IS 302-1)	-	-
22.54(Construction, IS 302-1)	-	-
22.55(Construction, IS 302-1)	-	-
22.58(Construction, IS 302-1)	-	-
22.59(Construction, IS 302-1)	-	-
22.60(Construction, IS 302-1)	-	-
22.61(Construction, IS 302-1)	-	-
23.2(Internal Wiring, IS 302-1)	-	-
23.4(Internal Wiring, IS 302-1)	-	-
23.6(Internal Wiring, IS 302-1)	-	-
23.7(Internal Wiring, IS 302-1)	-	-
23.8(Internal Wiring, IS 302-1)	-	-
23.9(Internal Wiring, IS 302-1)	-	-
23.10(Internal Wiring, IS 302-1)	-	-
25.1(Supply connection and external flexible cords, IS 302-1)	-	-
25.2(Supply connection and external flexible cords, IS 302-1)	-	-
25.3(Supply connection and external flexible cords, IS 302-1)	-	-
25.4(Supply connection and external flexible cords, IS 302-1)	-	-
25.5(Supply connection and external flexible cords, IS 302-1)	-	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.10(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.20(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.23(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.24(Supply Connection and External Flexible Cords, IS 302-1)	-	-
27.2(Provision for Earthing, IS 302-1)	-	-
27.3(Provision for Earthing, IS 302-1)	-	-
27.4(Provision for Earthing, IS 302-1)	-	-
27.6(Provision for Earthing, IS 302-1)	-	-
12(Charging of metal-ion batteries)	-	-
6(Classification- IS 302-1)	-	-
5(General conditions for the tests)	-	-
11.8(Temperature rise)	-	-
11.7(Duration corresponding)	-	-
11.6(Combined appliances)	-	-
11.5(Motor-operated appliances)	-	-
11.4(Heating appliances)	-	-
8.1.5(Live parts of built-in appliances)	-	-
18(Endurance)	-	-
17(Overload protection of transformers and associated circuits)	-	-
16(Leakage current and electric strength)	-	-
4(General requirement)	-	-
31(Resistance to Rusting)	-	-
30.2(Needle Flame Test)	-	-
30.2(Glow Wire Test)	-	-
30.1(Ball pressure test)	-	-
29(clearance, creepage distances and solid insulation)	-	-
28(Screw test and connections)	-	-
27.1(Provision for Earthing, IS 302-1)	-	-
26(Terminals for external conductors)	-	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	-
23.1(Internal Wiring, IS 302-1)	-	-
22.1(Construction, IS 302-1)	-	-
21.1(Mechanical Strength, IS 302-1)	-	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	-
19(Abnormal Operation)	-	-
18(Endurance)	-	-
17(Over Load Protection of Transformers and associated circuits)	-	-
16.3(Electric Strength (after clause 15 and 16.2))	-	-
16.2(Leakage Current (after Clause 15))	-	-
16.1(General)	-	-
16.0(General)	-	-
15.3(Humidity Test)	-	-
15.2(Spillage Test)	-	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	-
15.0(Moisture resistance)	-	-
14(Transient Over Voltages)	-	-
13.3(Electric Strength at operating temperature)	-	-
13.2(Leakage current at operating temperature)	-	-
13(Leakage current and electric strength at operating temperature)	-	-
11.3(Heating)	-	-
11.2(General)	-	-
11.1(General)	-	-
10.2(Current input)	-	-
10.1(Power input)	-	-
9(Starting of motor operation test requirements and tests)	-	-
8.1.4(Protection against live parts against protective impedance)	-	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	-
8.1.2(Protection against live parts in openings)	-	-
8.1.1(Protection against live parts in all positions)	-	-
7(Marking and instructions)	-	-
A.2(Earth continuity test)	-	-
Annex C(Ageing test on motors)	-	-
Annex D(Thermal motor protectors)	-	-
15.2(Moisture resistance)	-	-
19.17(Abnormal Operation, IS 302-1)	-	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	-
21.2(Mechanical Strength, IS 302-1)	-	-
21.3(Mechanical Strength, IS 302-1)	-	-
22.5(Construction)	-	-
22.6(Construction, IS 302-1)	-	-
22.11(Construction, IS 302-1)	-	-
22.16(Construction)	-	-
22.42(Construction)	-	-
23.3(Internal Wiring, IS 302-1)	-	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	-
26.5(Terminals for external conductors)	-	-
27.5(Provision for Earthing, IS 302-1)	-	-
28.1(Screws and connections)	-	-
22.2(Construction, IS 302-1)	-	-
22.3(Construction, IS 302-1)	-	-
B.22.4(Construction, IS 302-1)	-	-
B.22.5(Construction, IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.3(Marking- IS 302-1)	-	-
7.4(Marking- IS 302-1)	-	-
7.5(Marking- IS 302-1)	-	-
7.6(Marking- IS 302-1)	-	-
7.7(Marking- IS 302-1)	-	-
7.8(Marking- IS 302-1)	-	-
7.9(Marking- IS 302-1)	-	-
7.1O(Marking- IS 302-1)	-	-
7.11(Marking- IS 302-1)	-	-
7.12(Marking- IS 302-2-15)	-	-
7.13(Marking- IS 302-1)	-	-
6(Classification- IS 302-1)	-	-
7.15(Marking- IS 302-1)	-	-
11(Heating, IS 302-1, Table -3)	-	-
11(Heating, IS 302-1, Table -3)	-	-
11(Heating, IS 302-1, Table -3)	-	-
11(Heating, IS 302-1, Table -3)	-	-
11(Heating, IS 302-1, Table -3)	-	-
11(Heating, IS 302-1, Table -3)	-	-
11(Heating, IS 302-1)	-	-
19.7(Abnormal Operation, IS 302-1)	-	-
19.8(Abnormal Operation, IS 302-1)	-	-
19.9(Abnormal Operation, IS 302-1)	-	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	-
19.17(Abnormal Operation, IS 302-1)	-	-
22.7(Construction, IS 302-1)	-	-
22.9(Construction, IS 302-1)	-	-
22.10(Construction, IS 302-1)	-	-
22.12(Construction, IS 302-1)	-	-
22.14(Construction, IS 302-1)	-	-
22.15(Construction, IS 302-1)	-	-
22.18(Construction, IS 302-1)	-	-
22.19(Construction, IS 302-1)	-	-
22.21(Construction, IS 302-1)	-	-
22.22(Construction, IS 302-1)	-	-
22.24(Construction, IS 302-1)	-	-
22.25(Construction, IS 302-1)	-	-
22.28(Construction, IS 302-1)	-	-
22.31(Construction, IS 302-1)	-	-
22.34(Construction, IS 302-1)	-	-
22.35(Construction, IS 302-1)	-	-
22.36(Construction, IS 302-1)	-	-
22.37(Construction, IS 302-1)	-	-
22.38(Construction, IS 302-1)	-	-
22.40(Construction, IS 302-1)	-	-
22.41(Construction, IS 302-1)	-	-
22.43(Construction, IS 302-1)	-	-
22.43(Construction, IS 302-1)	-	-
22.44(Construction, IS 302-1)	-	-
22.49(Construction, IS 302-1)	-	-
22.54(Construction, IS 302-1)	-	-
22.55(Construction, IS 302-1)	-	-
22.58(Construction, IS 302-1)	-	-
22.59(Construction, IS 302-1)	-	-
22.60(Construction, IS 302-1)	-	-
22.61(Construction, IS 302-1)	-	-
23.2(Internal Wiring, IS 302-1)	-	-
23.4(Internal Wiring, IS 302-1)	-	-
23.6(Internal Wiring, IS 302-1)	-	-
23.7(Internal Wiring, IS 302-1)	-	-
23.8(Internal Wiring, IS 302-1)	-	-
23.9(Internal Wiring, IS 302-1)	-	-
23.10(Internal Wiring, IS 302-1)	-	-
25.1(Supply connection and external flexible cords, IS 302-1)	-	-
25.2(Supply connection and external flexible cords, IS 302-1)	-	-
25.3(Supply connection and external flexible cords, IS 302-1)	-	-
25.4(Supply connection and external flexible cords, IS 302-1)	-	-
25.5(Supply connection and external flexible cords, IS 302-1)	-	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.10(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.20(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.23(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.24(Supply Connection and External Flexible Cords, IS 302-1)	-	-
27.2(Provision for Earthing, IS 302-1)	-	-
27.3(Provision for Earthing, IS 302-1)	-	-
27.4(Provision for Earthing, IS 302-1)	-	-
27.6(Provision for Earthing, IS 302-1)	-	-
12(Charging of metal-ion batteries)	-	-
6(Classification- IS 302-1)	-	-
5(General conditions for the tests)	-	-
11.8(Temperature rise)	-	-
11.7(Duration corresponding)	-	-
11.6(Combined appliances)	-	-
11.5(Motor-operated appliances)	-	-
11.4(Heating appliances)	-	-
8.1.5(Live parts of built-in appliances)	-	-
18(Endurance)	-	-
17(Overload protection of transformers and associated circuits)	-	-
16(Leakage current and electric strength)	-	-
4(General requirement)	-	-
31(Resistance to Rusting)	-	-
30.2(Needle Flame Test)	-	-
30.2(Glow Wire Test)	-	-
30.1(Ball pressure test)	-	-
29(clearance, creepage distances and solid insulation)	-	-
28(Screw test and connections)	-	-
27.1(Provision for Earthing, IS 302-1)	-	-
26(Terminals for external conductors)	-	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	-
23.1(Internal Wiring, IS 302-1)	-	-
22.1(Construction, IS 302-1)	-	-
21.1(Mechanical Strength, IS 302-1)	-	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	-
19(Abnormal Operation)	-	-
18(Endurance)	-	-
17(Over Load Protection of Transformers and associated circuits)	-	-
16.3(Electric Strength (after clause 15 and 16.2))	-	-
16.2(Leakage Current (after Clause 15))	-	-
16.1(General)	-	-
16.0(General)	-	-
15.3(Humidity Test)	-	-
15.2(Spillage Test)	-	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	-
15.0(Moisture resistance)	-	-
14(Transient Over Voltages)	-	-
13.3(Electric Strength at operating temperature)	-	-
13.2(Leakage current at operating temperature)	-	-
13(Leakage current and electric strength at operating temperature)	-	-
11.3(Heating)	-	-
11.2(General)	-	-
11.1(General)	-	-
10.2(Current input)	-	-
10.1(Power input)	-	-
9(Starting of motor operation test requirements and tests)	-	-
8.1.4(Protection against live parts against protective impedance)	-	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	-
8.1.2(Protection against live parts in openings)	-	-
8.1.1(Protection against live parts in all positions)	-	-
7(Marking and instructions)	-	-
A.2(Earth continuity test)	-	-
Annex C(Ageing test on motors)	-	-
Annex D(Thermal motor protectors)	-	-
15.2(Moisture resistance)	-	-
19.17(Abnormal Operation, IS 302-1)	-	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	-
21.2(Mechanical Strength, IS 302-1)	-	-
21.3(Mechanical Strength, IS 302-1)	-	-
22.5(Construction)	-	-
22.6(Construction, IS 302-1)	-	-
22.11(Construction, IS 302-1)	-	-
22.16(Construction)	-	-
22.42(Construction)	-	-
23.3(Internal Wiring, IS 302-1)	-	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	-
26.5(Terminals for external conductors)	-	-
27.5(Provision for Earthing, IS 302-1)	-	-
28.1(Screws and connections)	-	-
22.2(Construction, IS 302-1)	-	-
22.3(Construction, IS 302-1)	-	-
B.22.4(Construction, IS 302-1)	-	-
B.22.5(Construction, IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.1(Marking- IS 302-1)	-	-
7.3(Marking- IS 302-1)	-	-
7.4(Marking- IS 302-1)	-	-
7.5(Marking- IS 302-1)	-	-
7.6(Marking- IS 302-1)	-	-
7.7(Marking- IS 302-1)	-	-
7.8(Marking- IS 302-1)	-	-
7.9(Marking- IS 302-1)	-	-
7.1O(Marking- IS 302-1)	-	-
7.11(Marking- IS 302-1)	-	-
7.12(Marking- IS 302-2-15)	-	-
7.13(Marking- IS 302-1)	-	-
6(Classification- IS 302-1)	-	-
7.15(Marking- IS 302-1)	-	-
11(Heating, IS 302-1, Table -3)	-	-
11(Heating, IS 302-1, Table -3)	-	-
11(Heating, IS 302-1, Table -3)	-	-
11(Heating, IS 302-1, Table -3)	-	-
11(Heating, IS 302-1, Table -3)	-	-
11(Heating, IS 302-1, Table -3)	-	-
11(Heating, IS 302-1)	-	-
19.7(Abnormal Operation, IS 302-1)	-	-
19.8(Abnormal Operation, IS 302-1)	-	-
19.9(Abnormal Operation, IS 302-1)	-	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	-
19.17(Abnormal Operation, IS 302-1)	-	-
22.7(Construction, IS 302-1)	-	-
22.9(Construction, IS 302-1)	-	-
22.10(Construction, IS 302-1)	-	-
22.12(Construction, IS 302-1)	-	-
22.14(Construction, IS 302-1)	-	-
22.15(Construction, IS 302-1)	-	-
22.18(Construction, IS 302-1)	-	-
22.19(Construction, IS 302-1)	-	-
22.21(Construction, IS 302-1)	-	-
22.22(Construction, IS 302-1)	-	-
22.24(Construction, IS 302-1)	-	-
22.25(Construction, IS 302-1)	-	-
22.28(Construction, IS 302-1)	-	-
22.31(Construction, IS 302-1)	-	-
22.34(Construction, IS 302-1)	-	-
22.35(Construction, IS 302-1)	-	-
22.36(Construction, IS 302-1)	-	-
22.37(Construction, IS 302-1)	-	-
22.38(Construction, IS 302-1)	-	-
22.40(Construction, IS 302-1)	-	-
22.41(Construction, IS 302-1)	-	-
22.43(Construction, IS 302-1)	-	-
22.43(Construction, IS 302-1)	-	-
22.44(Construction, IS 302-1)	-	-
22.49(Construction, IS 302-1)	-	-
22.54(Construction, IS 302-1)	-	-
22.55(Construction, IS 302-1)	-	-
22.58(Construction, IS 302-1)	-	-
22.59(Construction, IS 302-1)	-	-
22.60(Construction, IS 302-1)	-	-
22.61(Construction, IS 302-1)	-	-
23.2(Internal Wiring, IS 302-1)	-	-
23.4(Internal Wiring, IS 302-1)	-	-
23.6(Internal Wiring, IS 302-1)	-	-
23.7(Internal Wiring, IS 302-1)	-	-
23.8(Internal Wiring, IS 302-1)	-	-
23.9(Internal Wiring, IS 302-1)	-	-
23.10(Internal Wiring, IS 302-1)	-	-
25.1(Supply connection and external flexible cords, IS 302-1)	-	-
25.2(Supply connection and external flexible cords, IS 302-1)	-	-
25.3(Supply connection and external flexible cords, IS 302-1)	-	-
25.4(Supply connection and external flexible cords, IS 302-1)	-	-
25.5(Supply connection and external flexible cords, IS 302-1)	-	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.10(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.20(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.23(Supply Connection and External Flexible Cords, IS 302-1)	-	-
25.24(Supply Connection and External Flexible Cords, IS 302-1)	-	-
27.2(Provision for Earthing, IS 302-1)	-	-
27.3(Provision for Earthing, IS 302-1)	-	-
27.4(Provision for Earthing, IS 302-1)	-	-
27.6(Provision for Earthing, IS 302-1)	-	-

10 Apr, 2026

-
1 19.11.4.7 (Harmonics) harmonics EMI EMC facility not available. 2 19.11.4.6 (Class 3 Voltage dips and interruptions) Voltage dips and interruptions EMI EMC facility not available. 3 19.11.4.5 (Immunity to conducted discharges) immunity to conduced discharges EMI EMC facility not available. 4 19.11.4.4 (Surge immunity test) Surge Immunity Test EMI EMC facility not available. 5 19.11.4.3 (Fast transient bursts) Fast Transient Bursts EMI EMC facility not available. 6 19.11.4.2 (Radiated fields) Radiated Fields EMI EMC facility not available. 7 19.11.4.1 (Electrostatic discharges) Electrostatic Discharges EMI EMC facility not available. 8 32.1 (Radiation Toxicity and Similar Hazards) Radiation Toxicity and Similar Hazards Ionization meter, Lux meter available, ultraviolet hazard test facility not available. 9 24 (Components) Components Testing critical components list with certificate number supplied by the manufacturer, verified by lab for compliance with respective standards. 10 22.32 (Construction, IS 302-1) Oxygen Air Bomb Test Oxygen air bomb test facility not available. 11 32.1 (Radiation, toxicity and similar hazards, is 302-1) Radiation Toxicity and Similar Hazards Ionization meter, Lux meter available, ultraviolet hazard test facility not available. 12 32.2 (Radiation, toxicity and similar hazards, is 302-1) Radiation Toxicity and Similar hazards Ionization meter, Lux meter available, ultraviolet hazard test facility not available".

IS 302 : Part 2 : Sec 74 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 74 Portable immersion heaters

15500 View breakup
-

Clause No.	Exclusion	Remark
7(Marking and instructions)	-	included
8(Protection against access to live parts)	-	included
10(Power input and current)	-	included
10(Power input and current)	-	included
11(Heating)	-	included
13.1 &13.2(Leakage current test)	-	included
13.1 &13.3(Electric strength test)	-	included
14(Transient overvoltages)	-	included
15(Moisture resistance)	-	included
15.3(Moisture resistance)	-	included
16.1 &16.2(Leakage current test)	-	included
16.1 & 16.3(Electric strength test)	-	included
17(Overload protection of transformers and associated circuits)	-	included
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	included
20.1(Stability and mechanical hazards)	-	included
20.2(Stability and mechanical hazards)	-	included
21(Mechanical strength)	-	included
22(Construction)	-	included
23(Internal wiring)	-	included
24(Components)	-	included
25("Supply connection and external flexible cords")	-	included
26("Terminals for external conductors")	-	included
27(Provision for earthing)	-	included
28(Screws and connections)	-	included
29("Clearances, creepage distances and solid insulation")	-	included
30(Resistance to heat and fire)	-	included
30.101(Resistance to heat and fire)	-	included
31(Resistance to rusting)	-	included
32("Radiation, toxicity and similar hazards")	-	included
24.101(Components)	-	included
7(Marking and instructions)	-	included
8(Protection against access to live parts)	-	included
10(Power input and current)	-	included
10(Power input and current)	-	included
11(Heating)	-	included
13.1 &13.2(Leakage current test)	-	included
13.1 &13.3(Electric strength test)	-	included
14(Transient overvoltages)	-	included
15(Moisture resistance)	-	included
15.3(Moisture resistance)	-	included
16.1 &16.2(Leakage current test)	-	included
16.1 & 16.3(Electric strength test)	-	included
17(Overload protection of transformers and associated circuits)	-	included
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	included
20.1(Stability and mechanical hazards)	-	included
20.2(Stability and mechanical hazards)	-	included
21(Mechanical strength)	-	included
22(Construction)	-	included
23(Internal wiring)	-	included
24(Components)	-	included
25("Supply connection and external flexible cords")	-	included
26("Terminals for external conductors")	-	included
27(Provision for earthing)	-	included
28(Screws and connections)	-	included
29("Clearances, creepage distances and solid insulation")	-	included
30(Resistance to heat and fire)	-	included
30.101(Resistance to heat and fire)	-	included
31(Resistance to rusting)	-	included
32("Radiation, toxicity and similar hazards")	-	included
24.101(Components)	-	included
7(Marking and instructions)	-	included
8(Protection against access to live parts)	-	included
10(Power input and current)	-	included
10(Power input and current)	-	included
11(Heating)	-	included
13.1 &13.2(Leakage current test)	-	included
13.1 &13.3(Electric strength test)	-	included
14(Transient overvoltages)	-	included
15(Moisture resistance)	-	included
15.3(Moisture resistance)	-	included
16.1 &16.2(Leakage current test)	-	included
16.1 & 16.3(Electric strength test)	-	included
17(Overload protection of transformers and associated circuits)	-	included
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	included
20.1(Stability and mechanical hazards)	-	included
20.2(Stability and mechanical hazards)	-	included
21(Mechanical strength)	-	included
22(Construction)	-	included
23(Internal wiring)	-	included
25("Supply connection and external flexible cords")	-	included
26("Terminals for external conductors")	-	included
27(Provision for earthing)	-	included
28(Screws and connections)	-	included
29("Clearances, creepage distances and solid insulation")	-	included
30(Resistance to heat and fire)	-	included
30.101(Resistance to heat and fire)	-	included
31(Resistance to rusting)	-	included

10 Apr, 2026

-
Included w.e.f 06.01.2026 "Cl-19.11.4.1 (Electrostatic discharges) Cl-19.11.4.2 (Radiated fields) Cl-19.11.4.3 (Fast transient bursts) Cl-19.11.4.4 (Voltage surges) Cl-19.11.4.5 (Immunity to conducted discharges) Cl-19.11.4.6 (Class 3 Voltage dips and interruptions) Cl-19.11.4.7 Harmonics and inter-harmonics Cl 19.11.4.8 (Abnormal operation) Cl-24 (Components) 32 (""Radiation, toxicity and similar hazards"")"

IS 302 : Part 2 : Sec 3 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision)

15500 View breakup
-

Clause No.	Exclusion	Remark
Cl-4(General requirement)	-	included
Cl-7(Marking and instructions)	-	included
Cl-8(Protection against access to live parts)	-	included
Cl-10(Power input and current)	-	included
Cl-11(Heating)	-	included
Cl-12(Charging of metal-ion batteries)	-	included
Cl-13(Leakage current and electric strength at operating temperature)	-	included
Cl-14(Transient overvoltages)	-	included
Cl-15(Moisture resistance)	-	included
Cl-16(Leakage current and electric strength)	-	included
Cl-17(Overload protection of transformers and associated circuits)	-	included
Cl-19(Abnormal operation)	-	included
Cl-20(Stability and mechanical hazards)	-	included
Cl-21(Mechanical strength)	-	included
Cl-22(Construction)	-	included
Cl-23(Internal wiring)	-	included
Cl-24(Components)	-	included
Cl-25(Supply connection and external flexible cords)	-	included
Cl-26(Terminals for external conductors)	-	included
Cl-27(Provision for earthing)	-	included
Cl-28(Screws and connections)	-	included
Cl-29(Clearances, creepage distances and solid insulation)	-	included
Cl-30(Resistance to heat and fire)	-	included
Cl-31(Resistance to rusting)	-	included
Cl-32(Radiation, toxicity and similar hazards)	-	included
Cl-18(Endurance)	-	included
Cl-4(General requirement)	-	included
Cl-7(Marking and instructions)	-	included
Cl-8(Protection against access to live parts)	-	included
Cl-10(Power input and current)	-	included
Cl-11(Heating)	-	included
Cl-12(Charging of metal-ion batteries)	-	included
Cl-13(Leakage current and electric strength at operating temperature)	-	included
Cl-14(Transient overvoltages)	-	included
Cl-15(Moisture resistance)	-	included
Cl-16(Leakage current and electric strength)	-	included
Cl-17(Overload protection of transformers and associated circuits)	-	included
Cl-19(Abnormal operation)	-	included
Cl-20(Stability and mechanical hazards)	-	included
Cl-21(Mechanical strength)	-	included
Cl-22(Construction)	-	included
Cl-23(Internal wiring)	-	included
Cl-24(Components)	-	included
Cl-25(Supply connection and external flexible cords)	-	included
Cl-26(Terminals for external conductors)	-	included
Cl-27(Provision for earthing)	-	included
Cl-28(Screws and connections)	-	included
Cl-29(Clearances, creepage distances and solid insulation)	-	included
Cl-30(Resistance to heat and fire)	-	included
Cl-31(Resistance to rusting)	-	included
Cl-32(Radiation, toxicity and similar hazards)	-	included
Cl-18(Endurance)	-	included
Cl-4(General requirement)	-	included
Cl-7(Marking and instructions)	-	included
Cl-8(Protection against access to live parts)	-	included
Cl-10(Power input and current)	-	included
Cl-11(Heating)	-	included
Cl-12(Charging of metal-ion batteries)	-	included
Cl-13(Leakage current and electric strength at operating temperature)	-	included
Cl-14(Transient overvoltages)	-	included
Cl-15(Moisture resistance)	-	included
Cl-16(Leakage current and electric strength)	-	included
Cl-17(Overload protection of transformers and associated circuits)	-	included
Cl-19(Abnormal operation)	-	included
Cl-20(Stability and mechanical hazards)	-	included
Cl-21(Mechanical strength)	-	included
Cl-22(Construction)	-	included
Cl-23(Internal wiring)	-	included
Cl-25(Supply connection and external flexible cords)	-	included
Cl-26(Terminals for external conductors)	-	included
Cl-27(Provision for earthing)	-	included
Cl-28(Screws and connections)	-	included
Cl-29(Clearances, creepage distances and solid insulation)	-	included
Cl-30(Resistance to heat and fire)	-	included
Cl-31(Resistance to rusting)	-	included
Cl-18(Endurance)	-	included

10 Apr, 2026

-
Included w.e.f 06.01.2026 "Cl-19.11.4.1 (Electrostatic discharges) Cl-19.11.4.2 (Radiated fields) Cl-19.11.4.3 (Fast transient bursts) Cl-19.11.4.4 (Surge immunity test) Cl-19.11.4.5 (Immunity to conducted discharges) Cl-19.11.4.6 (Class 3 Voltage dips and interruptions) Cl-19.11.4.7 (Harmonics) Cl-24 (Components) Cl-32 (Radiation, toxicity and similar hazards)"

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

25000 View breakup
-

Clause No.	Exclusion	Remark
Cl-4(General Requirements)	-	included
Cl-5(General Conditions for the tests)	-	included
Cl-6(Classification)	-	included
Cl-7(Marking)	-	included
Cl-8(Safety Requirements)	-	included
Cl-9(Endurance fpr motor and base assembly)	-	included
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	included
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	included
Cl-10.4(Idli Batter)	-	included
Cl-10.5(Operational Tests for Juicers)	-	included
Cl-11(Temperature Withstand Test for Bowl)	-	included
Cl-12.1(Test for Switches)	-	included
Cl-13(Strength of Assembly)	-	included
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	included
Cl-14.2, Table-2 (ii)(Power input and current)	-	included
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	included
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	included
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	included
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	included
Cl-4(General Requirements)	-	included
Cl-5(General Conditions for the tests)	-	included
Cl-6(Classification)	-	included
Cl-7(Marking)	-	included
Cl-8(Safety Requirements)	-	included
Cl-9(Endurance fpr motor and base assembly)	-	included
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	included
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	included
Cl-10.4(Idli Batter)	-	included
Cl-10.5(Operational Tests for Juicers)	-	included
Cl-11(Temperature Withstand Test for Bowl)	-	included
Cl-12.1(Test for Switches)	-	included
Cl-13(Strength of Assembly)	-	included
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	included
Cl-14.2, Table-2 (ii)(Power input and current)	-	included
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	included
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	included
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	included
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	included
Cl-4(General Requirements)	-	included
Cl-5(General Conditions for the tests)	-	included
Cl-6(Classification)	-	included
Cl-7(Marking)	-	included
Cl-8(Safety Requirements)	-	included
Cl-9(Endurance fpr motor and base assembly)	-	included
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	included
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	included
Cl-10.4(Idli Batter)	-	included
Cl-10.5(Operational Tests for Juicers)	-	included
Cl-11(Temperature Withstand Test for Bowl)	-	included
Cl-12.1(Test for Switches)	-	included
Cl-13(Strength of Assembly)	-	included
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	included
Cl-14.2, Table-2 (ii)(Power input and current)	-	included
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	included
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	included
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	included
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	included

10 Apr, 2026

-
Included w.e.f.10.09.2025 Exclusion Cl 19.11.4.1 To Cl 19.11.4.7 EMI/EMC

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

14250 View breakup
-

Clause No.	Exclusion	Remark
6(Classification- IS 302-1 )	-	Test Charges for this clause is included
7.1(Marking- IS 302-1)	-	Test Charges for this clause is included
8( Protection Against Electric Shock, IS 302-1)	-	Test Charges for this clause is included
10(Power Input and Current, IS 302-1)	-	Test Charges for this clause is included
11(Heating, IS 302-1)	-	Test Charges for this clause is included
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	Test Charges for this clause is included
14(Transient Over Voltages, IS 302-1)	-	Test Charges for this clause is included
15(Moisture Resistance, IS 302-1)	-	Test Charges for this clause is included
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	Test Charges for this clause is included
19(Abnormal Operation, IS 302-1)	-	Test Charges for this clause is included
20(Stability & Mechanical Hazards, IS 302-1)	-	Test Charges for this clause is included
21(Mechanical Strength, IS 302-1)	-	Test Charges for this clause is included
22.1(Construction)	-	Test Charges for this clause is included
23(Internal Wiring, IS 302-1)	-	Test Charges for this clause is included
24.1(Components, IS 302-1)	-	Test Charges for this clause is included
25(Supply Connection and External Flexible Cords, IS 302-1)	-	Test Charges for this clause is included
26(Terminals for External Conductors, IS 302-1)	-	Test Charges for this clause is included
27(Provision for Earthing, IS 302-1)	-	Test Charges for this clause is included
28(Screws & Connections, IS 302-1)	-	Test Charges for this clause is included
29(Clearances and Distances through Insulation, IS 302-1)	-	Test Charges for this clause is included
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	Test Charges for this clause is included
31(Resistance of Rusting, IS 302-1)	-	Test Charges for this clause is included
Cl.32(Radiation, toxicity and similar hazards)	-	Test Charges for this clause is included
Cl 34(Operational Tests)	-	Test Charges for this clause is included
35(Temperature withstand test for bowl)	-	Test Charges for this clause is included
36(Test for controls )	-	Test Charges for this clause is included
37(Strength of Assembly )	-	Test Charges for this clause is included

10 Apr, 2026

-
-

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

7300 View breakup
-

Clause No.	Exclusion	Remark
Cl. 7(Verification)	-	Test Charges for this clause is included
Cl. 7(Verification)	-	Test Charges for this clause is included
Cl.8(Verification)	-	Test Charges for this clause is included
Cl.10(Verification)	-	Test Charges for this clause is included
Cl.11(Verification)	-	Test Charges for this clause is included
Cl.13(Verification)	-	Test Charges for this clause is included
Cl.14(Verification)	-	Test Charges for this clause is included
Cl.15(Verification)	-	Test Charges for this clause is included
Cl. 16(Verification)	-	Test Charges for this clause is included
Cl.19(Verification)	-	Test Charges for this clause is included
Cl.20(Verification)	-	Test Charges for this clause is included
Cl.21(Verification)	-	Test Charges for this clause is included
Cl.22(Verification)	-	Test Charges for this clause is included
Cl.23(Verification)	-	Test Charges for this clause is included
Cl.24(Verification)	-	Test Charges for this clause is included
Cl.25(Verification)	-	Test Charges for this clause is included
Cl.26(Verification)	-	Test Charges for this clause is included
Cl.27(Verification)	-	Test Charges for this clause is included
Cl.28(Verification)	-	Test Charges for this clause is included
CL.29(Verification)	-	Test Charges for this clause is included
Cl.30(Verification)	-	Test Charges for this clause is included
Cl.31(Verification)	-	Test Charges for this clause is included
Cl.32(Verification)	-	Test Charges for this clause is included

10 Apr, 2026

-
-

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

15400 View breakup
-

Clause No.	Exclusion	Remark
Cl. 6(Classification- IS 302-1)	-	Test Charges for this clause is included
Cl. 7(Verification)	-	Test Charges for this clause is included
Cl.8(Verification)	-	Test Charges for this clause is included
Cl.10(Verification)	-	Test Charges for this clause is included
Cl.11(Verification)	-	Test Charges for this clause is included
Cl.13(Verification)	-	Test Charges for this clause is included
Cl.14(Verification)	-	Test Charges for this clause is included
Cl.15.1(Moisture Resistance)	-	Test Charges for this clause is included
Cl. 16(Verification)	-	Test Charges for this clause is included
Cl.19(Verification)	-	Test Charges for this clause is included
Cl.20(Verification)	-	Test Charges for this clause is included
Cl.21(Verification)	-	Test Charges for this clause is included
Cl.22(Verification)	-	Test Charges for this clause is included
Cl.23(Verification)	-	Test Charges for this clause is included
Cl.24(Verification)	-	Test Charges for this clause is included
Cl.25(Verification)	-	Test Charges for this clause is included
Cl.26(Verification)	-	Test Charges for this clause is included
Cl.27(Verification)	-	Test Charges for this clause is included
Cl.28(Verification)	-	Test Charges for this clause is included
CL.29(Verification)	-	Test Charges for this clause is included
Cl.30(Verification)	-	Test Charges for this clause is included
Cl.31(Verification)	-	Test Charges for this clause is included
Cl.32(Verification)	-	Test Charges for this clause is included

10 Apr, 2026

-
Included w.e.f. 23-11-2020. EXCLUSIONS: EMI/EMC test (Cl.19.11.4.1 to Cl.19.11.4.7)

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

83600 View breakup
Rs. 83600/- (1.Digital Camera2.Standalone Switch Mode Power Supplies (SMPS)with output voltage 48 V (max)3.USB Type External Solid- State Storage Devices (above 256 GB capacity)4.USB Type External Hard Disk Drive5.Automatic Teller Cash Dispensing Machines6.Keyboard7.Smart Watches8.USB driven Barcode readers, barcode scanners, Iris scanners, Optical fingerprint scanners9.CCTV Cameras/CCTV Recorders10.Visual Display Units, Video Monitors of screen size up-to 32”11.Power Banks for use in portable applications12.Passport Reader13.Mail Processing Machines/Postage Machines/Franking Machines14.Smart Card Readers15.Copying Machine/Duplicators16.Point of Sale Terminals17.Cash Registers18.Mobile Phones19.Power Adaptors for IT Equipments20.Automatic Data Processing Machines21.Set Top Box22.Telephone Answering Machines23.Wireless Keyboards24.Scanners25.Printer, Plotters26.Visual Display Units, Video Monitors of screen size 32? & above27.Laptop/Notebook/Tablets)

Clause No.	Exclusion	Remark
1.5(Components)	-	Test Charges for this clause is included
1.6(Power interface .)	-	Test Charges for this clause is included
1.7(Markings and instructions)	-	Test Charges for this clause is included
2.1(Protection from electric shock and energy hazards)	-	Test Charges for this clause is included
2.2(SELV circuits)	-	Test Charges for this clause is included
2.3(TNV circuits)	-	Test Charges for this clause is included
2.4(Limited current circuits)	-	Test Charges for this clause is included
2.5(Limited power sources .)	-	Test Charges for this clause is included
2.6(Provisions for earthing and bonding)	-	Test Charges for this clause is included
2.7(Overcurrent and earth fault protection in primary circuits)	-	Test Charges for this clause is included
2.9(Electrical insulation)	-	Test Charges for this clause is included
2.10(Clearances, creepage distances and distances through insulation)	-	Test Charges for this clause is included
3.1(General)	-	Test Charges for this clause is included
3.2(Connection to a mains supply)	-	Test Charges for this clause is included
4.1(Stability)	-	Test Charges for this clause is included
4.2(Mechanical strength)	-	Test Charges for this clause is included
4.3(Design and construction)	-	Test Charges for this clause is included
4.4(Protection against hazardous moving parts)	-	Test Charges for this clause is included
4.5(Thermal requirements)	-	Test Charges for this clause is included
4.6(Openings in enclosures)	-	Test Charges for this clause is included
4.7(Resistance to fire)	-	Test Charges for this clause is included
5.1(Touch current and protective conductor curren)	-	Test Charges for this clause is included
5.2(Electric strength)	-	Test Charges for this clause is included
5.3(Abnormal operating and fault conditions)	-	Test Charges for this clause is included
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	Test Charges for this clause is included
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	Test Charges for this clause is included
6.3(Protection of the telecommunication wiring system from overheating)	-	Test Charges for this clause is included
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	Test Charges for this clause is included
7.4(Insulation between primary circuits and cable distribution systems)	-	Test Charges for this clause is included

10 Apr, 2026

-
Up to 50Hz only Excluding: Cl.1.5 Components, Cl.2.8 Safety interlocks, Cl. 2.10.5.4 Semiconductor devices ,Cl. 2.10.6 Annex U, Coated printed boards, Cl.2.10.7 Components external terminations, Cl.2.10.8 Sample preparation and preliminary inspection, Cl.2.10.9 Thermal cycling, Cl.2.10.10 Test for Pollution Degree I env. And for insulating compound, Cl.2.10.11 Tests for semiconductor devices and for cemented joints, Cl. 3.2.5 10 Power supply cords, Cl.4.2.8 Cathode ray tubes, Cl. 4.3.8 Batteries, 4.3.10 Dust, powders, liquids and gases, 4.3.12 Flammable liquids, 4.3.13.3 Effect of ultraviolet (UV) radiation on materials, 4.3.13.4 Human exposure to ultraviolet (UV) radiation, 4.3.13.5 Effect of Lasers (including LEDs).

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

86000 View breakup
Rs. 86000/- (1.Bluetooth Speakers2.Smart Speakers (With and Without Display)3.Webcam (Finished Product)4.Video Camera5.Wireless Microphone6.Television other than Plasma/ LCD/LED TVs7.Electronic Musical System with input power below 200 Watts8.Wireless Headphone and Earphone9.Plasma/ LCD/LED Television of screen size up-to 32”10.Power Adaptors for Audio, Video & Similar Electronic Apparatus11.Electronic Musical Systems with input power 200W and above12.Amplifiers with input power 2000W and above13.Optical Disc Players with built in amplifiers of input power 200W and above14.Plasma/ LCD/LED Televisions of screen size 32? & above15.Electronic Games (Video)

Clause No.	Exclusion	Remark
5(Marking and instructions)	-	test charges for this clause is included
6(Hazardous radiations)	-	test charges for this clause is included
7(Heating under normal operating conditions)	-	test charges for this clause is included
8(Constructional requirements with regard to the protection against electric shock)	-	test charges for this clause is included
9(Electric shock hazard under normal operating conditions)	-	test charges for this clause is included
10(Insulation requirements)	-	test charges for this clause is included
11(Fault conditions)	-	test charges for this clause is included
12(Mechanical strength)	-	test charges for this clause is included
13(CLEARANCES and CREEPAGE DISTANCES)	-	test charges for this clause is included
14(Components)	-	test charges for this clause is included
15(TERMINALS)	-	test charges for this clause is included
16(External flexible cords)	-	test charges for this clause is included
17(Electrical connections and mechanical fixings)	-	test charges for this clause is included
19(Stability and mechanical hazards)	-	test charges for this clause is included
20(Resistance to fire)	-	test charges for this clause is included
6.1(Ionizing radiation)	-	test charges for this clause is included
4(General test conditions)	-	test charges for this clause is included
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	test charges for this clause is included

10 Apr, 2026

-
Up to 50Hz only Excluding: Cl. 6.2- Laser Radiations, Cl. 6.3 Light Emitting Diodes (LEDs), Cl. 8.16 Requirements for insulated winding wires for use without additional interleaved insulation, Cl. 8.17-Endurance test for wound components with insulated winding wires without additional interleaved insulation, Cl. 13.5-Printed Boards, Cl.14 components, Cl. 15.1-Plugs and Sockets, Cl.15.3-Terminals for external flexible cords and for permanent connection to the MAINS supply, Cl.16 External flexible cords, Cl.18 Mechanical strength of picture tubes and protection against the effects of implosion.

IS 366 (1991)

Electric iron - Specification (Fourth Revision)

15700 View breakup
-

Clause No.	Exclusion	Remark
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.1 of IS 302-1))	-	Test Charges for this clause is included
9.0(Protection against access to live parts (as per Cl. 8 of IS 302-2-3 and IS 302-1))	-	Test Charges for this clause is included
9.0(Power input and current (as per Cl. 10 of IS 302-2-3 and IS 302-1))	-	Test Charges for this clause is included
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	Test Charges for this clause is included
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	Test Charges for this clause is included
9.0(Transient Overvoltage (as per of Cl. 14 of IS 302-2-3 and Table 6 of IS 302-1))	-	Test Charges for this clause is included
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	Test Charges for this clause is included
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	Test Charges for this clause is included
9.0(Staibilty and mechanical hazards (as per of Cl.20 of IS 302-2-3 and IS 302-1) )	-	Test Charges for this clause is included
9.0(Mechanical strength (as per of Cl.21 of IS 302-2-3 and IS 302-1) )	-	Test Charges for this clause is included
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	Test Charges for this clause is included
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	Test Charges for this clause is included
9.0(Components (as per of Cl.24 of IS 302-2-3 and IS 302-1) )	-	Test Charges for this clause is included
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	Test Charges for this clause is included
9.0(Terminals for external conductors (as per of Cl.26 of IS 302-2-3 and IS 302-1) )	-	Test Charges for this clause is included
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	Test Charges for this clause is included
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	Test Charges for this clause is included
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	Test Charges for this clause is included
9.0(Resistance to Heat and Fire (as per of Cl.30 of IS 302-2-3 and IS 302-1))	-	Test Charges for this clause is included
9.0(Resistance to Rusting (as per of Cl.31 of IS 302-2-3 and IS 302-1))	-	Test Charges for this clause is included
10.0(Measurement of Heating up time)	-	Test Charges for this clause is included
11.0(Measurement of sole plate temperature)	-	Test Charges for this clause is included
12.0(Measurement of Tempearture Distribution)	-	Test Charges for this clause is included
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	Test Charges for this clause is included
14.0(Measurement of Cyclic fluctuation of temperature of hottest point )	-	Test Charges for this clause is included
16.0(Measurement of Thermostatic staibility)	-	Test Charges for this clause is included
17(Measurement of Thermostatic staibility)	-	Test Charges for this clause is included
16 of IS 302-2-3(Leakage current electric strength)	-	Test Charges for this clause is included
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.2 of IS 302-1))	-	Test Charges for this clause is included

10 Apr, 2026

-
-

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

47600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6(Power interface)	-	0.0	Test Charges for this clause is included
4.7(Marking & instructions)	-	0.0	Test Charges for this clause is included
5.1(Protection against shock and energy hazards)	-	0.0	Test Charges for this clause is included
5.2(Requirement of auxiliary circuits)	-	0.0	Test Charges for this clause is included
5.3(Protective earthing and bonding)	-	0.0	Test Charges for this clause is included
5.4(AC and DC power isolation)	-	0.0	Test Charges for this clause is included
5.5(Over current and earth fault condition)	-	0.0	Test Charges for this clause is included
5.6(Safety interlocks)	-	0	Test Charges for this clause is included
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	0.0	Test Charges for this clause is included
6.1(Wiring, connections and supply)	-	0.0	Test Charges for this clause is included
6.2(Connection to power)	-	0.0	Test Charges for this clause is included
6.3(Wiring terminals for external power conductors)	-	0.0	Test Charges for this clause is included
7.1(Enclosure)	-	0.0	Test Charges for this clause is included
7.2(STABILITY)	-	0.0	Test Charges for this clause is included
7.3(MECHANICAL STRENGTH)	-	0.0	Test Charges for this clause is included
7.4(Construction details)	-	0.0	Test Charges for this clause is included
7.5(Resistance to fire)	-	0.0	Test Charges for this clause is included
7.6(Battery location)	-	0.0	Test Charges for this clause is included
7.7(Temperature rise)	-	0.0	Test Charges for this clause is included
8.1(General procision for earth leakage)	-	0.0	Test Charges for this clause is included
8.2(Electric Strength)	-	0.0	Test Charges for this clause is included
8.3(Abnormal operating and fault conditions)	-	0.0	Test Charges for this clause is included
9.0(Connection to telecommunication networks)	-	0.0	Test Charges for this clause is included

10 Apr, 2026

-
Up to 50Hz only For UPS/Inverter up to 10 KVA) Excluding Cl.3.3.3, Annex-L.5 - Non- linear loads Cl.4.5- Components Cl.5.6- Protection of Personnel-Safety Interlocks Cl.6.2.1 /RD Cl.3.2.6.1-Power supply cords Cl.7.6.7, Annex M- Gas Concentration, Ventilation of Battery Compartments Annex I.5-Solid State back feed protection

IS 9281 : Part 3 (1981)

Specification for electronic weighing systems: Part 3 requirements

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1 Table 1 Sl. No.3(Rated Load ( RL ) - IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.4(Mode of operation Compression/tension/ universal -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.5(Input resistance / impedance - IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.6(Output resistance / impedance -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.7(Input voltage/current - IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.9(Overload, safe - IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.10(Overload, ultimate - IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.11(Accuracy - IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.12(Rated output voltage - IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.14(No load output - IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.15(Drift in no load output (zero drift ) after 1 hour of warm-up -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.16(Instability of RO after warm-up period of 1 hour -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.17(Non-linearity ( whereever applicable )- IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.18(Hysteresis (wherever applicable) -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.19(Non-repeatability of zero output -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.20(Non-repeatability of rated output - IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.21(Creep at rated load after 30 minutes -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.22(Creep recovery after 10 minutes - IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.26(Concentric angular loading error At 1° inclination -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.27(Concentric angular loading eror At 3° inclination -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.28(Eccentric loading error (at 1 mm of eccentricity) -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.29(Eccentric angular loading error 1 mm eccentricity and 1° inclination - IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.30(1 mm eccentricity and 3° inclination - IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.33(Temperature effect on no load output -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.34(Temperature effect on rated output - IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.36(Insulation resistance -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.42(Dimensions, weight -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.43(Casing material -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.44(Surface finish/protection/ type sealing -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.45(Mounting details and outline drawing -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.46(Manufacturer's name and address -IS : 9281 ( Part III )-1981)	-	0.0	Test Charges for this clause is included
3.1 Table 2 Sl. No.1(Rated load -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 2 Sl. No.2(Accuracy -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 2 Sl. No.4(Non-linearity -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 2 Sl. No.5(Drift of no-load output with temperature -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 2 Sl. No.6(Drift of no-load output with time after 1 h -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 2 Sl. No.7(Drift of full scale output with time after 1 h -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 2 Sl. No.8(Internal calibration -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 2 Sl. No.9(Number of scale division -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 2 Sl. No.10(Resolution -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 2 Sl. No.11(Tare provision -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 2 Sl. No.12(Display -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 2 Sl. No.13(Recording -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 2 Sl. No.15(Overload indication -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 2 Sl. No.16(Response to full scale -IS : 9281 ( Part II )-1979)	-	200	verification test
3.1 Table 2 Sl. No.17(Operating temperature -IS : 9281 ( Part II )-1979)	-	750	verification test
3.1 Table 2 Sl. No.18(Warm up periods -IS : 9281 ( Part II )-1979)	-	100	verification test
3.1 Table 2 Sl. No.19(Weight IS : 9281 ( Part II )-1979)	-	200	inspection
3.1 Table 2 Sl. No.20(Dimensions -IS : 9281 ( Part II )-1979)	-	200	inspection
3.1 Table 2 Sl. No.21(Environmental condition -IS : 9281 ( Part II )-1979)	-	500	conditioning
3.1 Table 2 Sl. No.22(Operating voltage and frequency -IS : 9281 ( Part II )-1979)	-	200	verification test
3.1 Table 2 Sl. No.23(Tolerance on operating voltage -IS : 9281 ( Part II )-1979)	-	200	verification
3.1 Table 1 Sl. No.41(Electrical connection -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.39(Humidity -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.24(Side load, ultimate -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.25(Side load error for 10 percent RL -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 1 Sl. No.23(Side load, safe -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 2 Sl. No.14(Speed of measurement- IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included
3.1 Table 2 Sl. No.3(Transducer excitation and distortion/regulation -IS : 9281 ( Part II )-1979)	-	0.0	Test Charges for this clause is included

10 Apr, 2026

-
-

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

14000 View breakup
-

Clause No.	Exclusion	Remark
Cl.6 of IS 302-2-35:2017(Classification)	-	Test Charges for this clause is included
Cl.7 of IS 302-2-35:2017(Marking)	-	Test Charges for this clause is included
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	Test Charges for this clause is included
Cl.10 of IS 302-2- 35:2011(Power Input & Current )	-	Test Charges for this clause is included
Cl.11 of 302-2-35:2017(Heating)	-	Test Charges for this clause is included
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	Test Charges for this clause is included
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	Test Charges for this clause is included
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	Test Charges for this clause is included
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	Test Charges for this clause is included
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	Test Charges for this clause is included
Cl.20 of IS 302-2-35-2011(Stability & Mechanical Hazards )	-	Test Charges for this clause is included
Cl.21.1 of IS 302-2-35-2011(Mechanical strength)	-	Test Charges for this clause is included
Cl.22 of IS 302-2-35-2011(Construction )	-	Test Charges for this clause is included
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	Test Charges for this clause is included
Cl.24 of IS 302-2-35:2017(Component )	-	Test Charges for this clause is included
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	Test Charges for this clause is included
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	Test Charges for this clause is included
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	Test Charges for this clause is included
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	Test Charges for this clause is included
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	Test Charges for this clause is included
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	Test Charges for this clause is included
Cl.31 of IS 302-2-35: 2011(Resistance to Rusting )	-	Test Charges for this clause is included
Cl.32 of IS 302-2-35: 2011(Radiation, Toxicity and Similar Hazards )	-	Test Charges for this clause is included
Cl.10 of IS 8978 : 1992(Finish)	-	Test Charges for this clause is included
Cl.11 of IS 8978 : 1992(Operation of flow switch)	-	Test Charges for this clause is included
Cl.12 of IS 8978 : 1992(Endurance)	-	Test Charges for this clause is included

10 Apr, 2026

-
-

IS 369 (2019)

Household electric direct - Acting room heaters - Performance requirements (Fourth Revision)

12700 View breakup
-

Clause No.	Exclusion	Remark
Cl.6 of IS 302-2-30:2007(Classification)	-	Test Charges for this clause is included
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	Test Charges for this clause is included
Cl.8 of IS 302-2-30:2007 &IS:302-1:2008(Protection Against Access to Live Parts)	-	Test Charges for this clause is included
Cl.10 of IS 302-2-30:2007 &IS:302-1:2008(Power Input and Current)	-	Test Charges for this clause is included
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	Test Charges for this clause is included
Cl.13 of IS 302-2-30:2007 &IS:302-1:2008(Leakage Current & Electric Strength at operating temp)	-	Test Charges for this clause is included
Cl.14 of IS 302-2-30:2007 &IS:302-1:2008(Transient Over Voltages)	-	Test Charges for this clause is included
Cl.15 of IS 302-2-30:2007 &IS:302-1:2008(Moisture Resistance)	-	Test Charges for this clause is included
Cl.16 of IS 302-2-30:2007 &IS:302-1:2008(Leakage Current & Electric Strength )	-	Test Charges for this clause is included
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	Test Charges for this clause is included
Cl.20 of IS 302-2-30:2007 &IS:302-1:2008(Stability & Mechanical Hazards)	-	Test Charges for this clause is included
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008(Mechanical Strength)	-	Test Charges for this clause is included
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	Test Charges for this clause is included
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008(Internal Wiring)	-	Test Charges for this clause is included
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	Test Charges for this clause is included
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	Test Charges for this clause is included
Cl.26 of IS 302-2-30:2007 &IS:302-1:2008(Terminal for External Conductors)	-	Test Charges for this clause is included
Cl.27 of IS 302-2-30:2007 &IS:302-1:2008(Provision for Earthing)	-	Test Charges for this clause is included
Cl.28 of IS 302-2-30:2007 &IS:302-1:2008(Screws and Connections)	-	Test Charges for this clause is included
Cl.29 of IS 302-2-30:2007 &IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation.)	-	Test Charges for this clause is included
Cl.30 of IS 302-2-30:2007 &IS:302-1:2008(Resistance to Heat and Fire.)	-	Test Charges for this clause is included
Cl.31 of IS 302-2-30:2007 &IS:302-1:2008(Resistance to Rusting)	-	Test Charges for this clause is included
Cl.7 of IS 369:2019(Dimensions)	-	Test Charges for this clause is included
Cl.9 of IS 369:2019(Temperature rises of surfaces surrounding the heater)	-	Test Charges for this clause is included
Cl.18 of IS 302-2-30:2007 (Endurance)	-	Test Charges for this clause is included
Cl.10 of IS 369:2019(Warming-up time of the heater)	-	Test Charges for this clause is included
Cl.8 of IS 369:2019(Temperature rises of air-outlet grilles and external surfaces)	-	Test Charges for this clause is included
Cl.14 of IS 369:2019(Inrush current)	-	Test Charges for this clause is included
Cl.15 of IS 369:2019(Effect of radiant heat)	-	Test Charges for this clause is included
Cl.16 of IS 369:2019(Usable power)	-	Test Charges for this clause is included

10 Apr, 2026

-
-

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

12600 View breakup
-

Clause No.	Exclusion	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	Test Charges for this clause is included
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	Test Charges for this clause is included
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	Test Charges for this clause is included
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	Test Charges for this clause is included
Cl.11 of IS 302-2201: 2008(Heating)	-	Test Charges for this clause is included
Cl. 12 of IS 368:2014(Operation under overload conditions of appliances with heating elements)	-	Test Charges for this clause is included
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	Test Charges for this clause is included
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	Test Charges for this clause is included
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	Test Charges for this clause is included
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	Test Charges for this clause is included
Cl.18 of IS 368:2014(Endurance)	-	Test Charges for this clause is included
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	Test Charges for this clause is included
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	Test Charges for this clause is included
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	Test Charges for this clause is included
Cl.22 of IS 302-2-201: 2008(Construction)	-	Test Charges for this clause is included
Cl.23 of 302-2-201:2008(Internal Wiring )	-	Test Charges for this clause is included
Cl.24 of IS 302-2-201: 2008(Component)	-	Test Charges for this clause is included
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	Test Charges for this clause is included
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	Test Charges for this clause is included
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	Test Charges for this clause is included
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	Test Charges for this clause is included
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	Test Charges for this clause is included
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	Test Charges for this clause is included
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	Test Charges for this clause is included
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	Test Charges for this clause is included

10 Apr, 2026

-
-

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

9250 View breakup
-

Clause No.	Exclusion	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	Test Charges for this clause is included
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	Test Charges for this clause is included
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	Test Charges for this clause is included
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	Test Charges for this clause is included
Cl.11 of IS 302-2201: 2008(Heating)	-	Test Charges for this clause is included
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	Test Charges for this clause is included
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	Test Charges for this clause is included
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	Test Charges for this clause is included
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	Test Charges for this clause is included
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	Test Charges for this clause is included
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	Test Charges for this clause is included
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	Test Charges for this clause is included
Cl.22 of IS 302-2-201: 2008(Construction)	-	Test Charges for this clause is included
Cl.23 of 302-2-201:2008(Internal Wiring )	-	Test Charges for this clause is included
Cl.24 of IS 302-2-201: 2008(Component)	-	Test Charges for this clause is included
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	Test Charges for this clause is included
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	Test Charges for this clause is included
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	Test Charges for this clause is included
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	Test Charges for this clause is included
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	Test Charges for this clause is included
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	Test Charges for this clause is included
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	Test Charges for this clause is included
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	Test Charges for this clause is included

10 Apr, 2026

-
-

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

12700 View breakup
-

Clause No.	Exclusion	Remark
Cl.6 (Classification)	-	Test charges for this clause is included
Cl.7(Marking and Instructions)	-	Test charges for this clause is included
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	Test charges for this clause is included
Cl.10 & IS:302-1:2008(Power Input and Current)	-	Test charges for this clause is included
Cl.11 & IS:302-1:2008(Heating)	-	Test charges for this clause is included
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	Test charges for this clause is included
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	Test charges for this clause is included
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	Test charges for this clause is included
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	Test charges for this clause is included
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	Test charges for this clause is included
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	Test charges for this clause is included
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	Test charges for this clause is included
Cl.22.1 of IS 302-1:2008(Construction)	-	Test charges for this clause is included
Cl.23 & IS:302-1:2008(Internal Wiring )	-	Test charges for this clause is included
Cl.24.1 of 302-1:2008(Component)	-	Test charges for this clause is included
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	Test charges for this clause is included
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	Test charges for this clause is included
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	Test charges for this clause is included
Cl.28 of 302-1:2008(Screws and Connections.)	-	Test charges for this clause is included
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	Test charges for this clause is included
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	Test charges for this clause is included
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	Test charges for this clause is included
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	Test charges for this clause is included

10 Apr, 2026

-
-

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

15400 View breakup
-

Clause No.	Exclusion	Remark
6.0(Classification)	-	Test charges for this clause is included
7(Marking and instructions)	-	Test charges for this clause is included
8(Protection against live parts)	-	Test charges for this clause is included
10(POWER INPUT AND CURRENT)	-	Test charges for this clause is included
11(HEATING)	-	Test charges for this clause is included
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	Test charges for this clause is included
14(TRANSIENT OVERVOLTAGES)	-	Test charges for this clause is included
15(MOISTURE RESISTANCE)	-	Test charges for this clause is included
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	Test charges for this clause is included
19(ABNORMAL OPERATION)	-	Test charges for this clause is included
20(STABILITY AND MECHANICAL HAZARDS)	-	Test charges for this clause is included
21(MECHANICAL STRENGTH)	-	Test charges for this clause is included
22(CONSTRUCTION)	-	Test charges for this clause is included
23(INTERNAL WIRING)	-	Test charges for this clause is included
24(COMPONENTS)	-	Test charges for this clause is included
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	Test charges for this clause is included
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	Test charges for this clause is included
27(PROVISION FOR EARTHING)	-	Test charges for this clause is included
28(SCREWS AND CONNECTIONS)	-	Test charges for this clause is included
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	Test charges for this clause is included
30(RESISTANCE TO HEAT AND FIRE)	-	Test charges for this clause is included
31(RESISTANCE TO RUSTING)	-	Test charges for this clause is included
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	Test charges for this clause is included

10 Apr, 2026

-
-

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

14250 View breakup
-

Clause No.	Exclusion	Remark
6(Classification- IS 302-1 )	-	Test charges for this clause is included
7.1(Marking- IS 302-1)	-	Test charges for this clause is included
8( Protection Against Electric Shock, IS 302-1)	-	Test charges for this clause is included
10(Power Input and Current, IS 302-1)	-	Test charges for this clause is included
11(Heating, IS 302-1)	-	Test charges for this clause is included
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	Test charges for this clause is included
14(Transient Over Voltages, IS 302-1)	-	Test charges for this clause is included
15.1(Moisture Resistance, IS 302-1)	-	Test charges for this clause is included
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	Test charges for this clause is included
19.7(Abnormal Operation, IS 302-1)	-	Test charges for this clause is included
20.1(Stability & Mechanical Hazards, IS 302-1)	-	Test charges for this clause is included
21.1(Mechanical Strength, IS 302-1)	-	Test charges for this clause is included
22(Construction, IS 302-1)	-	Test charges for this clause is included
23.1(Internal Wiring, IS 302-1)	-	Test charges for this clause is included
24.1(Components, IS 302-1)	-	Test charges for this clause is included
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	Test charges for this clause is included
26(Terminals for External Conductors, IS 302-1)	-	Test charges for this clause is included
27(Provision for Earthing, IS 302-1)	-	Test charges for this clause is included
28(Screws & Connections, IS 302-1)	-	Test charges for this clause is included
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	Test charges for this clause is included
30.1(Resistance to Heat and Fire, IS 302-1)	-	Test charges for this clause is included
31(Resistance of Rusting, IS 302-1)	-	Test charges for this clause is included
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	Test charges for this clause is included

10 Apr, 2026

-
-

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

15400 View breakup
-

Clause No.	Exclusion	Remark
6.0(Classification)	-	Test charges for this clause is included
7.0(Marking and instructions)	-	Test charges for this clause is included
8.0(Protection against access to live part test)	-	Test charges for this clause is included
10.0(Power Input and current test)	-	Test charges for this clause is included
11.0(Heating test)	-	Test charges for this clause is included
13.0(Leakage current and electric strength test)	-	Test charges for this clause is included
14.0(Transient voltages)	-	Test charges for this clause is included
15.0(Moisture Resistance)	-	Test charges for this clause is included
16.0(Leakage current and electric strength test)	-	Test charges for this clause is included
19.0(Abnormal Operations)	-	Test charges for this clause is included
20.0(Stability and Mechanical Hazards)	-	Test charges for this clause is included
21.0(Mechanical Strength)	-	Test charges for this clause is included
22.0(Construction verification related tests)	-	Test charges for this clause is included
23.0(Internal wiring)	-	Test charges for this clause is included
24.0(Components)	-	Test charges for this clause is included
25.0(Supply connections and External Flexible Cords)	-	Test charges for this clause is included
26.0(Terminal for External Conductors)	-	Test charges for this clause is included
27.0(Provision for Earthing)	-	Test charges for this clause is included
28.0(Screws and connections)	-	Test charges for this clause is included
29.0(Clearances and Creepage distances and solid insulation)	-	Test charges for this clause is included
30.0(Resistance to heat and fire)	-	Test charges for this clause is included
31.0(Resistance to rusting)	-	Test charges for this clause is included
32.0(Radiation, Toxicity and Similar hazards)	-	Test charges for this clause is included

10 Apr, 2026

-
Included w.e.f. 23-11-2020. EXCLUSIONS: EMI/EMC test (Cl.19.11.4.1 to Cl.19.11.4.7)

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

8500 View breakup
-

Clause No.	Exclusion	Remark
6(Classification- IS 302-1 )	-	Test charges for this clause is included
7.1(Marking- IS 302-1)	-	Test charges for this clause is included
8( Protection Against Electric Shock, IS 302-1)	-	Test charges for this clause is included
10(Power Input and Current, IS 302-1)	-	Test charges for this clause is included
11(Heating, IS 302-1)	-	Test charges for this clause is included
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	Test charges for this clause is included
14(Transient Over Voltages, IS 302-1)	-	Test charges for this clause is included
15.1(Moisture Resistance, IS 302-1)	-	Test charges for this clause is included
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	Test charges for this clause is included
19.1(Abnormal Operation)	-	Test charges for this clause is included
20.1(Stability & Mechanical Hazards, IS 302-1)	-	Test charges for this clause is included
21.1(Mechanical Strength, IS 302-1)	-	Test charges for this clause is included
22(Construction, IS 302-1)	-	Test charges for this clause is included
23.1(Internal Wiring, IS 302-1)	-	Test charges for this clause is included
24.1(Components, IS 302-1)	-	Test charges for this clause is included
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	Test charges for this clause is included
26(Terminals for External Conductors, IS 302-1)	-	Test charges for this clause is included
27.1(Provision for Earthing, IS 302-1)	-	Test charges for this clause is included
28(Screws & Connections, IS 302-1)	-	Test charges for this clause is included
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	Test charges for this clause is included
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	Test charges for this clause is included
31(Resistance of Rusting, IS 302-1)	-	Test charges for this clause is included
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	Test charges for this clause is included

10 Apr, 2026

-
-

IS 367 (1993)

Electric kettles and jugs for household and similar use - Specification (Fourth Revision)

15400 View breakup
-

Clause No.	Exclusion	Remark
7(Classification)	-	charge of this clause is included
8(Marking and Instruction)	-	charge of this clause is included
9(Safety Requirements)	-	charge of this clause is included
11(Overall Dimensions)	-	charge of this clause is included
12(Mass)	-	charge of this clause is included
13(Water Capacity)	-	charge of this clause is included
14(Time to boil one litre of water)	-	charge of this clause is included
15(Time to boil water capacity)	-	charge of this clause is included
16(Minimum quantity of water that can be boiled)	-	charge of this clause is included
17(Temperature of supporting surface)	-	charge of this clause is included
18(Thermal Efficiency)	-	charge of this clause is included
19(Endurance)	-	charge of this clause is included
20(Finish)	-	charge of this clause is included

10 Apr, 2026

-
Included w.e.f. 14.07.2023.

IS 302 : Part 2 : Sec 209 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 209 low speed food grinding machines

15400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(CI. 6 IS 302-2-209 : 1994(Classification )	-	0.0	Charge of this clause is included
Cl. 7 302-2-209 : 1994(Marking)	-	0	Charge of this clause is included
Cl. 8 302-2-209 : 1994(Protection Against Electric Shock )	-	0	Charge of this clause is included
Cl. 10 302-2-209 : 1994(Power Input and Current )	-	0	Charge of this clause is included
Cl. 11 302-2-209 : 1994(Temperature Rise)	-	0	Charge of this clause is included
Cl. 13 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	0	Charge of this clause is included
Cl. 14 302-2-209 : 1994(Radio and television interference suppression / Transient over voltages)	-	0	Charge of this clause is included
Cl. 15 302-2-209 : 1994(Moisture Resistance Test )	-	0	Charge of this clause is included
Cl. 16 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	0	Charge of this clause is included
Cl. 18 302-2-209 : 1994(Endurance)	-	0	Charge of this clause is included
Cl. 19 302-2-209 : 1994(Abnormal Operation )	-	0	Charge of this clause is included
Cl. 20 302-2-209 : 1994(Stability & Mechanical Hazards)	-	0	Charge of this clause is included
Cl. 21 302-2-209 : 1994(Mechanical strength)	-	0	Charge of this clause is included
Cl. 22 302-2-209 : 1994(Construction )	-	0	Charge of this clause is included
Cl. 23 302-2-209 : 1994(Internal Wiring)	-	0	Charge of this clause is included
Cl. 24 302-2-209 : 1994(Components)	-	0	Charge of this clause is included
Cl. 25 302-2-209 : 1994(Supply Connection & External Flexible Cords)	-	0	Charge of this clause is included
Cl. 26 302-2-209 : 1994(Terminals for External conductors )	-	0	Charge of this clause is included
Cl. 27 302-2-209 : 1994(Provision for Earthing )	-	0	Charge of this clause is included
Cl. 28 302-2-209 : 1994(Screws & Connections)	-	0	Charge of this clause is included
Cl. 29 302-2-209 : 1994(Clearances, Creepage Distances & Solid insulation )	-	0	Charge of this clause is included
Cl. 30 302-2-209 : 1994(Resistance to Heat Fire & Tracking )	-	0	Charge of this clause is included
Cl. 31 302-2-209 : 1994(Resistance to Rusting)	-	0	Charge of this clause is included
Cl. 32 302-2-209 : 1994(Radiation Hazards)	-	0	Charge of this clause is included
(CI. 6 IS 302-2-209 : 1994(Classification )	-	0	Charge of this clause is included
Cl. 7 302-2-209 : 1994(Marking)	-	0	Charge of this clause is included
Cl. 8 302-2-209 : 1994(Protection Against Electric Shock )	-	0	Charge of this clause is included
Cl. 10 302-2-209 : 1994(Power Input and Current )	-	0	Charge of this clause is included
Cl. 11 302-2-209 : 1994(Temperature Rise)	-	0	Charge of this clause is included
Cl. 13 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	0	Charge of this clause is included
Cl. 14 302-2-209 : 1994(Radio and television interference suppression / Transient over voltages)	-	0	Charge of this clause is included
Cl. 15 302-2-209 : 1994(Moisture Resistance Test )	-	0	Charge of this clause is included
Cl. 16 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	0	Charge of this clause is included
Cl. 18 302-2-209 : 1994(Endurance)	-	0	Charge of this clause is included
Cl. 19 302-2-209 : 1994(Abnormal Operation )	-	0	Charge of this clause is included
Cl. 20 302-2-209 : 1994(Stability & Mechanical Hazards)	-	0	Charge of this clause is included
Cl. 21 302-2-209 : 1994(Mechanical strength)	-	0	Charge of this clause is included
Cl. 22 302-2-209 : 1994(Construction )	-	0	Charge of this clause is included
Cl. 23 302-2-209 : 1994(Internal Wiring)	-	0	Charge of this clause is included
Cl. 24 302-2-209 : 1994(Components)	-	0	Charge of this clause is included
Cl. 25 302-2-209 : 1994(Supply Connection & External Flexible Cords)	-	0	-
Cl. 26 302-2-209 : 1994(Terminals for External conductors )	-	0	Charge of this clause is included
Cl. 27 302-2-209 : 1994(Provision for Earthing )	-	0	Charge of this clause is included
Cl. 28 302-2-209 : 1994(Screws & Connections)	-	0	Charge of this clause is included
Cl. 29 302-2-209 : 1994(Clearances, Creepage Distances & Solid insulation )	-	0	Charge of this clause is included
Cl. 30 302-2-209 : 1994(Resistance to Heat Fire & Tracking )	-	0	Charge of this clause is included
Cl. 31 302-2-209 : 1994(Resistance to Rusting)	-	0	Charge of this clause is included
Cl. 32 302-2-209 : 1994(Radiation Hazards)	-	0	Charge of this clause is included
Cl. 9 302-2-209 : 1994(Starting of motor operated appliances)	-	0	Charge of this clause is included
Cl. 17 302-2-209 : 1994(Overload Protection of Transformers and Associated Circuit)	-	0	Charge of this clause is included

10 Apr, 2026

-
Included w.e.f. 14.07.2023.

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

Class I, Class II and class III

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	0.0	charge of this clause is included
8.1.1(Protection against live parts in all positions)	-	0.0	charge of this clause is included
10.1(Power input)	-	0.0	charge of this clause is included
11.3(Heating)	-	0.0	charge of this clause is included
13.1(General)	-	0.0	charge of this clause is included
14(Transient Over Voltages)	-	0.0	charge of this clause is included
15.0(General)	-	0.0	charge of this clause is included
16.1(General)	-	0.0	charge of this clause is included
18(Endurance Test requirements and tests)	-	0.0	charge of this clause is included
19(Abnormal Operation)	-	0.0	charge of this clause is included
20(Stability test)	-	0.0	charge of this clause is included
21(Mechanical Strength Test)	-	0.0	charge of this clause is included
22(Construction verification related test)	-	0.0	charge of this clause is included
23(General)	-	0.0	charge of this clause is included
24(Components)	-	0.0	charge of this clause is included
25(Supply connection and external flexible cords)	-	0.0	charge of this clause is included
26(Terminals for external conductors)	-	0.0	charge of this clause is included
27(Provision for earthing)	-	0.0	charge of this clause is included
28(Screw test and connections)	-	0.0	charge of this clause is included
29(clearance, creepage distances and solid insulation)	-	0.0	charge of this clause is included
30.1(Ball pressure test)	-	0.0	charge of this clause is included
31(Resistance to Rusting)	-	0.0	charge of this clause is included
32(Radiation Toxicity and Similar Hazards)	-	0.0	charge of this clause is included
7(Marking and instructions)	-	0	charge of this clause is included
8.1.1(Protection against live parts in all positions)	-	0	charge of this clause is included
10.1(Power input)	-	0	charge of this clause is included
11.3(Heating)	-	0	charge of this clause is included
13.1(General)	-	0	charge of this clause is included
14(Transient Over Voltages)	-	0	charge of this clause is included
15.0(General)	-	0	charge of this clause is included
16.1(General)	-	0	charge of this clause is included
18(Endurance Test requirements and tests)	-	0	charge of this clause is included
19(Abnormal Operation)	-	0	charge of this clause is included
20(Stability test)	-	0	charge of this clause is included
21(Mechanical Strength Test)	-	0	charge of this clause is included
22(Construction verification related test)	-	0	charge of this clause is included
23(General)	-	0	charge of this clause is included
24(Components)	-	0	charge of this clause is included
25(Supply connection and external flexible cords)	-	0	charge of this clause is included
26(Terminals for external conductors)	-	0	charge of this clause is included
27(Provision for earthing)	-	0	charge of this clause is included
28(Screw test and connections)	-	0	charge of this clause is included
29(clearance, creepage distances and solid insulation)	-	0	charge of this clause is included
30.1(Ball pressure test)	-	0	charge of this clause is included
31(Resistance to Rusting)	-	0	charge of this clause is included
32(Radiation Toxicity and Similar Hazards)	-	0	charge of this clause is included
8.1.2(Protection against live parts in openings)	-	0	charge of this clause is included
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	charge of this clause is included
8.1.4(Protection against live parts against protective impedance)	-	0	charge of this clause is included
8.1.5(Live parts of built-in appliances)	-	0	charge of this clause is included
11.1(General)	-	0	charge of this clause is included
11.2(General)	-	0	charge of this clause is included
11.4(Heating appliances)	-	0	charge of this clause is included
11.5(Motor-operated appliances)	-	0	charge of this clause is included
11.6(Combined appliances)	-	0	charge of this clause is included
11.7(Duration corresponding)	-	0	charge of this clause is included
11.8(Temperature rise)	-	0	charge of this clause is included
13.2(Leakage current at operating temperature)	-	0	charge of this clause is included
13.3(Electric Strength at operating temperature)	-	0	charge of this clause is included
17(Over Load Protection of Transformers and associated circuits)	-	0	charge of this clause is included
30.2(Glow Wire Test)	-	0	charge of this clause is included

10 Apr, 2026

-
Included w.e.f. 14.07.2023. "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

Bureau of Indian Standards

The National Standards Body of India

National Research and Technology Consortium (NRTC), Parwanoo

HPCED Building, Department of industries complex, Sector-1, Parwanoo, Solan, Himachal Pradesh, 173220

9816034484 nrtcpwn@gmail.com

Scope List