BIS - LIMS (Laboratory Information Management System)

FOOTWEAR DESIGN AND DEVELOPMENT INSTITUTE

A-10/A GAUTAM BUDDTH NAGAR SECTOR 24 NOIDA, NOIDA, Gautam Buddha Nagar, Uttar Pradesh, 201301

9891994460 rajeshmishra@fddiindia.com

Scope List

Reset

29 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

16500 View breakup
-

Clause No.	Exclusion	Remark
Cl 5.2(Design)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.2.2, Table 4(" Height of upper ")	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.2.3(Heel area)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.1.1(Construction of whole footwear)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.1.2(Upper/outsole bond strength)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.2.1(Toe protection - general)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.2.2(Internal length)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.2.3(Width of toecap flange)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.2.6(Impact resistance)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.2.7(Compression resistance)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.3(Leak proofness)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.4("Specific ergonomic features ")	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.7(Seam strength)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.8(Lead Content ( National Annex A))	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.2(Thickness)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.3(Tear strength)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.5(Flexing resistance)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.6(Water vapour permeability and coefficient)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.7(Resistance to hydrolysis)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.5.2(Lining- Tear strength)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.5.3(Lining- Abrasion resistance)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.6.2, Table 14(Tear strength of tongue)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.7.2(Water permeability of insock)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.8.2.2(Cleated area)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.8.2.3(Cleat height)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.8.3(Outsole- Tear strength)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.8.4(Outsole- Abrasion resistance)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.8.5(Outsole-Flexing resistance)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.8.7(Interlayer bond strength)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.1.2(Construction of perforation resistant insert)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.3.1(Heat insulation of outsole complex)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.3.2(Cold insulation of outsole complex)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.4(Energy absorption of seat region)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.5(Water resistance)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.6.1(Metatarsal protection - Construction)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.7(Ankle protection)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.8.2(Cut resistance footwear- design)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.8.3(Resistance to cutting)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.9(Scuff cap)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.3(Upper — Water penetration and absorption)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.4.1(Resistance to hot contact - Outsole)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.4.3.2(Design of Ladder grip)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.4.3.4(Heel breast of Ladder grip)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 7, Table 20("Marking ")	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.

31 May, 2028

-
-

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

33950 View breakup
-

Clause No.	Exclusion	Remark
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-.
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.4,Table no. 4(ii)(Density)	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.4,Table no. 5(i)(Density)	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	We offer the package price for BIS Sample only. For mechanical test 10500/- and for chemical test 23450/-
Cl-5 ((Amendment No-1)(Category And Type)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/--
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-
Cl-10 (Amendment No-1)(Marking)	-	We offer the package price for BIS Sample only. For mechanical test complete footwear 7500/-(type I & Type II),COMPLETE FOOTWEAR for kids 4500/-,complete footwear with all components for all type 10500/- for chemical test 23450/- & for lead only 640/-

31 May, 2028

-
-

IS 10702 (2023)

Hawai Chappal-Specification

33950 View breakup
-

Clause No.	Exclusion	Remark
4.1(Material)	-	We offer the package price For BIS Sample only. For Mechanical Test 10500/- and For all Chemical Test 23450/.
4.2(Length)	-	We offer the package price For BIS Sample only. For Mechanical Test 10500/- and For all Chemical Test 23450/.
4.3(Thickness)	-	We offer the package price For BIS Sample only. For Mechanical Test 10500/- and For all Chemical Test 23450/.
4.4 , Table No. 1 , i)(Density)	-	We offer the package price For BIS Sample only. For Mechanical Test 10500/- and For all Chemical Test 23450/.
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	We offer the package price For BIS Sample only. For Mechanical Test 10500/- and For all Chemical Test 23450/.
4.4 , Table No. 1 , iii)(3Split tear strength)	-	We offer the package price For BIS Sample only. For Mechanical Test 10500/- and For all Chemical Test 23450/.
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	We offer the package price For BIS Sample only. For Mechanical Test 10500/- and For all Chemical Test 23450/.
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	We offer the package price For BIS Sample only. For Mechanical Test 10500/- and For all Chemical Test 23450/.
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	We offer the package price For BIS Sample only. For Mechanical Test 10500/- and For all Chemical Test 23450/.
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	We offer the package price For BIS Sample only. For Mechanical Test 10500/- and For all Chemical Test 23450/.
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	We offer the package price For BIS Sample only. For Mechanical Test 10500/- and For all Chemical Test 23450/. .
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	We offer the package price For BIS Sample only. For Mechanical Test 10500/- and For all Chemical Test 23450/.
4.4 , Table No . 2 , iv)(Stud bolt)	-	We offer the package price For BIS Sample only. For Mechanical Test 10500/- and For all Chemical Test 23450/.
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	We offer the package price For BIS Sample only. For Mechanical Test 10500/- and For all Chemical Test 23450/.
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	We offer the package price For BIS Sample only. For Mechanical Test 10500/- and For all Chemical Test 23450/.
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	We offer the package price For BIS Sample only. For Mechanical Test 10500/- and For all Chemical Test 23450/.
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	We offer the package price For BIS Sample only. For Mechanical Test 10500/- and For all Chemical Test 23450/.
Cl-4 ((Amendment No-1)(Category And Type)	-	We offer the package price For BIS Sample only. For Mechanical Test ADULT(type I & type II) 10500/- for KIDS 5500/- For chemical 23450/- & for lead content only 640/-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	We offer the package price For BIS Sample only. For Mechanical Test ADULT(type I & type II) 10500/- fOR KIDS 5500/- For chemical 23450/- & for lead content only 640/-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	We offer the package price For BIS Sample only. For Mechanical Test ADULT(type I & type II) 10500/- fOR KIDS 5500/- For chemical 23450/- & for lead contant only 640/-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	We offer the package price For BIS Sample only. For Mechanical Test ADULT(type I & type II) 10500/- fOR KIDS 5500/- For chemical 23450/- & for lead contant only 640/-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	We offer the package price For BIS Sample only. For Mechanical Test ADULT(type I & type II) 10500/- fOR KIDS 5500/- For chemical 23450/- & for lead contant only 640/-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	We offer the package price For BIS Sample only. For Mechanical Test ADULT(type I & type II) 10500/- fOR KIDS 5500/- For chemical 23450/- & for lead contant only 640/-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	We offer the package price For BIS Sample only. For Mechanical Test ADULT(type I & type II) 10500/- fOR KIDS 5500/- For chemical 23450/- & for lead contant only 640/-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	We offer the package price For BIS Sample only. For Mechanical Test ADULT(type I & type II) 10500/- fOR KIDS 5500/- For chemical 23450/- & for lead contant only 640/-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	We offer the package price For BIS Sample only. For Mechanical Test ADULT(type I & type II) 10500/- fOR KIDS 5500/- For chemical 23450/- & for lead contant only 640/-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	We offer the package price For BIS Sample only. For Mechanical Test ADULT(type I & type II) 10500/- fOR KIDS 5500/- For chemical 23450/- & for lead contant only 640/-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	We offer the package price For BIS Sample only. For Mechanical Test ADULT(type I & type II) 10500/- fOR KIDS 5500/- For chemical 23450/- & for lead contant only 640/-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	We offer the package price For BIS Sample only. For Mechanical Test ADULT(type I & type II) 10500/- fOR KIDS 5500/- For chemical 23450/- & for lead contant only 640/-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	We offer the package price For BIS Sample only. For Mechanical Test ADULT(type I & type II) 10500/- fOR KIDS 5500/- For chemical 23450/- & for lead contant only 640/-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	We offer the package price For BIS Sample only. For Mechanical Test ADULT(type I & type II) 10500/- fOR KIDS 5500/- For chemical 23450/- & for lead contant only 640/-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	We offer the package price For BIS Sample only. For Mechanical Test ADULT(type I & type II) 10500/- fOR KIDS 5500/- For chemical 23450/- & for lead contant only 640/-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	We offer the package price For BIS Sample only. For Mechanical Test ADULT(type I & type II) 10500/- fOR KIDS 5500/- For chemical 23450/- & for lead contant only 640/-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	We offer the package price For BIS Sample only. For Mechanical Test ADULT(type I & type II) 10500/- fOR KIDS 5500/- For chemical 23450/- & for lead contant only 640/-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	We offer the package price For BIS Sample only. For Mechanical Test ADULT(type I & type II) 10500/- fOR KIDS 5500/- For chemical 23450/- & for lead contant only 640/-

31 May, 2028

-
-

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

46850 View breakup
-

Clause No.	Exclusion	Remark
Cl No.4.3(Whole Footwear)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
4.3.1(Insole)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
4.3.2(Toe spring height)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
4.3.6(Energy Absorption at Seat Region)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
4.3.7(Complete Shoe Flexing)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
4.3.8(Washability)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
4.3.9(Slip Resistance)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/- Additional 10 % discount to Bis for Mechanical Test only.
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/- Additional 10 % discount to Bis for Mechanical Test only.
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/- Additional 10 % discount to Bis for Mechanical Test only.
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	We We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-.
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	We ofWe offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/- Additional 10 % discount to Bis for Mechanical Test only.
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/- Additional 10 % discount to Bis for Mechanical Test only.-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/- Additional 10 % discount to Bis for Mechanical Test only.
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-.
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-640/-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	WWe offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	We offer the package price for Bis sample only, For mechanical Test, complete footwear type -1 10,500/- , Type II and (KIDS) 5500/-. Optional with type -1 23400/- & Optional with Type II and kids 11700/- Chemical 23450/- & lead 640/-

31 May, 2028

-
-

IS 17043 : Part 2 (2024)

Shoes: Shoes for General Purpose

39950 View breakup
-

Clause No.	Exclusion	Remark
Cl-5.1(Shape and Design)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with optional 8500/-
Cl-5.3(Material)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-5.4, Table-1 (i)(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-5.4, Table-1 (ii)(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-5.4, Table-1 (iii)(Whole shoe flexing, flexes)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-5.4, Table-1 (iv)(Water proofness on complete shoe)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-5.4, Table-1 (v)(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-5.4, Table-1 (vi)(Attachment strength of strap and buckle/D-ring N)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-5.4, Table-1 (vii)(Attachment strength of strap and velcro , N, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-5.4, Table-1 (viii)(Strength of eyelet attachment, N, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-5.4, Table-1 (ix)(Heel pull off strength, N, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-5.4, Table-1 (x)(Top piece attachment strength, N, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-5.4, Table-1 (xi)(Seam strength, N/mm, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-5.4, Table-1 (xii)(Whole shoe topline strength, N, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-5.4, Table-1 (xiii)(Abrasion resistance (volume loss), mm3)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-5.4, Table-1 (xiv)(Chemical requirements(3))	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-5.4, Table-1 (xv)(Lead content (as Pb) ppm, Max)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-5.4, Table-1 (xvi)(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.1.1, Table-2 (i)(Tear trength, N)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.1.1, Table-2 (ii)(Flexing resistance, flexes)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.1.1, Table-2 (iii)(Colour fastness to rubbing (marring/staining))	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.1.1, Table-2 (iv)(Colour fastness to water (contact method- multi fabrics))	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.1.1, Table-2 (v)(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.1.1, Table-2 (vi)(Stitch tear strength, N/mm, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.1.2, Table-3 (i)(Colour fastness to light, Marring, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.1.2, Table-3 (ii)(Water resistance)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.1.2, Table-3 (iii)(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.1.3, Table- 4 (i)(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.1.3, Table- 4 (ii)(Tear Strength, N, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.1.3, Table- 4 (iii)(Strength at needle perforation, N/mm, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.1.3, Table- 4 (iv)(Flexing resistance, Flexes)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.1.3, Table- 4 (v)(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.1.3, Table- 4 (vi)(Hydrolysis resistance)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.1.4, Table-5 (i)(Colour fastness to light, Marring, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.1.4, Table- 5 (ii)(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.2, Table-6 (i)(Tear strength, N, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.2, Table-6 (ii)(Abrasion resistance)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.2, Table-6 (iii)(Colour fastness rubbing (crocking))	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.2, Table-6 (iv)(Colour fastness to perspiration)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.2, Table-6 (v)(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.3, Table-7 (i)(Flexing index, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.3, Table-7 (ii)(Abrasion resistance at 400 cycles)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.3, Table-7 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.4, Table-8 (i)(Thickness, mm, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.4, Table-8 (ii)(Abrasion resistance)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.4, Table-8 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.5.1, , Table-9 (i)(Flexing resistance)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.5.1, , Table-9 (ii)(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.5.1, , Table-9 (iii)(Compression set, percent, Max)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.5.2.1, Table-10 (i)(Grain crack index, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.5.2.1, Table-10 (ii)(Density, g/cm3 , Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.5.2.1, Table-10 (iii)(Abrasion resistance, mm/kcs, Max)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.5.2.2, Table-11 (i)(Water resistance, (dynamic method))	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.5.2.3, Table-12 (i)(Hardness, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.5.2.3, Table-12 (ii)(Density, g/cm3 , Max)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.5.2.3, Table-12 (iii)(Abrasion resistance (volume loss), mm3 , Max)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.5.2.3, Table-12 (iv)(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.6, Table-13 (i)(Heat shrinkage, percent, Max)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.6, Table-13 (ii)(Split tear strength, kg/25 mm, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.6, Table-13 (iii)(Compression set, percent, Max)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.7, Table-14 (i)(Hardness, N)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.7, Table-14 (ii)(Resilience, percent)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.7, Table-14 (iii)(Moisture resistance, percent)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.10, Table-17 (i)(Lace breaking strength, N, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.10, Table-17 (ii)(Lace tag strength, N, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.10, Table-17 (iii)(Lace to lace abrasion resistance, cycles)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.10, Table-17 (iv)(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.10, Table-17 (v)(Corrosion resistance)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.11, Table-18 (i)(Fatigue resistance, cycles, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.11, Table-18 (ii)(Security of puller attachment strength, N, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.11, Table-18 (iii)(Lateral load, N, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.11, Table-18 (iv)(End attachment strength, N, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-8.1(Marking)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.7, Table-14 (iv)(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.7, Table-14 (v)(Adhesion strength, N/mm)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.8, Table-15 (i)(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl- 6.8, Table-15 (ii)(a) Shear strength, kPa b) Initial, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl- 6.9, Table-16 (i)(Limit of useful extension, percent, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl- 6.9, Table-16 (ii)(Needle strength, N/mm, Min)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.1.1, Table-2 (vii)(Abrasion resistance)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-
Cl-6.1.3, Table- 4 (vii)(Abrasion resistance)	-	For mechanical Test, 16500/- AND FOR Chemical test 23450 /- and for lead content only 640/- for type -1 and type-2 8500/-, kids 7000/- , type -1 with optional 16500/- , type-II/KIDS with opt 8500/-

31 May, 2028

-
-

IS 17043 : Part 1 (2024)

Shoes - Specification Part 1 Shoes for Services

39950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5, Table 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	0	WE offer the package price for BIS sample only. For mechanical 16500/- & for chemical 23450/- . Additional charges will be applicable for additional mechanical test.
Cl-5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	WE offer the package price for BIS sample only. For mechanical 16500/- & for chemical 23450/- . Additional charges will be applicable for additional mechanical test.
Cl-5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	WE offer the package price for BIS sample only. For mechanical 16500/- & for chemical 23450/- . Additional charges will be applicable for additional mechanical test.
Cl-5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	0	WE offer the package price for BIS sample only. For mechanical 16500/- & for chemical 23450/- . Additional charges will be applicable for additional mechanical test.
Cl-5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	0	WE offer the package price for BIS sample only. For mechanical 16500/- & for chemical 23450/- . Additional charges will be applicable for additional mechanical test.
Cl-5, Table no 1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	WE offer the package price for BIS sample only. For mechanical 16500/- & for chemical 23450/- . Additional charges will be applicable for additional mechanical test.
Cl-5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	0	WE offer the package price for BIS sample only. For mechanical 16500/- & for chemical 23450/- . Additional charges will be applicable for additional mechanical test.
Cl-5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	0	WE offer the package price for BIS sample only. For mechanical 16500/- & for chemical 23450/- . Additional charges will be applicable for additional mechanical test.
Cl-5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	WE offer the package price for BIS sample only. For mechanical 16500/- & for chemical 23450/- . Additional charges will be applicable for additional mechanical test.
Cl-5, Table no 1 of IS 17011 (x)(pH)	-	0	WE offer the package price for BIS sample only. For mechanical 16500/- & for chemical 23450/- . Additional charges will be applicable for additional mechanical test.
Cl-5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	0	WE offer the package price for BIS sample only. For mechanical 16500/- & for chemical 23450/- . Additional charges will be applicable for additional mechanical test.
Cl-5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	0	WE offer the package price for BIS sample only. For mechanical 16500/- & for chemical 23450/- . Additional charges will be applicable for additional mechanical test.
Cl-4.2(Design)	-	-	-
Cl-4.3.1(Size)	-	-	-
Cl-4.3.2(Weight)	-	-	-
Cl-4.4(Height of Upper)	-	-	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	-	-
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	-	-
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	-	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	-	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	-	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	-	-
Cl-4.6.1(Material)	-	-	-
Cl-4.6.2(Tear Strength)	-	-	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	-	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	-	-
Cl-4.7.1(Material)	-	-	-
Cl-4.7.2(Tear Strength)	-	-	-
Cl-4.7.3(Abrasion Resistance)	-	-	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	-	-
Cl. 4.8.1(Material)	-	-	-
Cl-4.8.2(Abrasion Resistance)	-	-	-
Cl-4.8.3(Water Absorption and Desorption)	-	-	-
Cl-4.9.3(Abrasion Resistance)	-	-	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	-	-
Cl-4.11.1(Material)	-	-	-
Cl-4.11.2(Tear Strength)	-	-	-
Cl-4.12(Closing Thread)	-	-	-
Cl-4.13.2(Thickness)	-	-	-
Cl-4.13.3(Moulded Density)	-	-	-
Cl-4.13.4(Hardness)	-	-	-
Cl-4.13.5(Ageing Test)	-	-	-
Cl-4.13.6(Tear Strength)	-	-	-
Cl-4.13.7(Abrasion Resistance)	-	-	-
Cl-4.13.8(Flexing Resistance)	-	-	-
Cl-4.14(Eyelet)	-	-	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	-	-
Cl-5(Chemical Requirements)	-	-	-
Cl-7(Marking)	-	-	-
Cl.4.5.8(Energy Absorption of Seat Region)	-	-	-
Cl- 4.5.3.1(Upper-outsole bond strength)	-	-	-
Cl.4.5.3.2(Interlayer bond strength)	-	-	-
Cl-4.13.1(Material)	-	-	-
Cl-4.9.1(Material)	-	-	-
Cl-4.9.2(Water Absorption and Desorption)	-	-	-
Cl-4.15.1(Material)	-	-	-

31 May, 2028

-
-

IS 17861 (2022)

TEXTILE BOOTS WITH POLYMERIC SOLE JUNGLE BOOTS - SPECIFICATION Third Revision

39950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-5.7.4(Colour Fastness: Light)	-	0	we offer the package price for BIS Sample only 16500 / - for mechanical & 23450/- for chemical . additional testing charges will be applicable on additional mechanical test .
Cl 5.9(Outer Toe Cap (minimum thickness))	-	0	we offer the package price for BIS Sample only 16500 / - for mechanical & 23450/- for chemical . additional testing charges will be applicable on additional mechanical test .
Cl- 6, Table No 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	we offer the package price for BIS Sample only 16500 / - for mechanical & 23450/- for chemical . additional testing charges will be applicable on additional mechanical test .
Cl-6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	we offer the package price for BIS Sample only 16500 / - for mechanical & 23450/- for chemical . additional testing charges will be applicable on additional mechanical test .
Cl-6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	0	we offer the package price for BIS Sample only 16500 / - for mechanical & 23450/- for chemical . additional testing charges will be applicable on additional mechanical test .
Cl-6, Table no-1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	0	we offer the package price for BIS Sample only 16500 / - for mechanical & 23450/- for chemical . additional testing charges will be applicable on additional mechanical test .
Cl-6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	we offer the package price for BIS Sample only 16500 / - for mechanical & 23450/- for chemical . additional testing charges will be applicable on additional mechanical test .
Cl-6, Table no-1 of IS 17011 (vii)(Formaldehyde)	-	0	we offer the package price for BIS Sample only 16500 / - for mechanical & 23450/- for chemical . additional testing charges will be applicable on additional mechanical test .
Cl-6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	0	we offer the package price for BIS Sample only 16500 / - for mechanical & 23450/- for chemical . additional testing charges will be applicable on additional mechanical test .
Cl-6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	we offer the package price for BIS Sample only 16500 / - for mechanical & 23450/- for chemical . additional testing charges will be applicable on additional mechanical test .
Cl-6, Table no 1 of IS 17011 (x)(pH)	-	0	we offer the package price for BIS Sample only 16500 / - for mechanical & 23450/- for chemical . additional testing charges will be applicable on additional mechanical test .
Cl-6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	0	we offer the package price for BIS Sample only 16500 / - for mechanical & 23450/- for chemical . additional testing charges will be applicable on additional mechanical test .
Cl-6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	0	we offer the package price for BIS Sample only 16500 / - for mechanical & 23450/- for chemical . additional testing charges will be applicable on additional mechanical test .
Clause-5.1(Design)	-	-	-
Clause-5.2(Size and Fitting)	-	-	-
Clause-5.3(Height of Upper)	-	-	-
Clause-5.4(Weight)	-	-	-
Clause-5.5.1(Construction)	-	-	-
Clause-5.5.2(Upper – Outsole Bond Strength)	-	-	-
Clause-5.5.3(Consolidation Test (For Type 1 and Type 2))	-	-	-
Clause-5.5.5(Slip Resistance)	-	-	-
Clause-5.5.6(Energy Absorption of Seat Region)	-	-	-
Clause-5.5.7(Water Resistance)	-	-	-
Clause-5.6.1(Penetration Resistance)	-	-	-
Clause-5.6.2(Electrical Resistance (Antistatic))	-	-	-
Clause-5.6.3(Heat Insulation of Sole Complex)	-	-	-
Clause-5.6.4(Cold Insulation of Sole Complex)	-	-	-
Clause-5.7.1(Material)	-	-	-
Clause-5.7.2(Tear Strength)	-	-	-
Clause-5.7.3(Water Vapour Permeability and Coefficient)	-	-	-
Clause-5.8.2(Tear Strength)	-	-	-
Clause-5.8.3(Abrasion Resistance)	-	-	-
Clause-5.8.4(Water Vapour Permeability and Coefficient)	-	-	-
Clause-5.9.1(Tear Strength)	-	-	-
Clause-5.10.1(Binding Tape)	-	-	-
Clause-5.11.1(Closing Thread)	-	-	-
Clause-5.12.1(Material and Thickness)	-	-	-
Clause-5.12.2(Abrasion Resistance)	-	-	-
Clause-5.12.3(Water Absorption and Desorption)	-	-	-
Clause-5.13.1(Material and Thickness)	-	-	-
Clause-5.13.2(Abrasion Resistance)	-	-	-
Clause-5.13.3(Bond Strength of Textile Layer and Insock)	-	-	-
Clause-5.15(Toe Puff and Counter Stiffener)	-	-	-
Clause-5.16.1(Material)	-	-	-
Clause-5.16.2(Thickness)	-	-	-
Clause-5.16.3(Sole Density)	-	-	-
Clause-5.16.4(Hardness)	-	-	-
Clause-5.16.5(Ageing)	-	-	-
Clause-5.16.6(Tear Strength)	-	-	-
Clause-5.16.7(Abrasion Resistance)	-	-	-
Clause-5.16.8(Flexing Resistance)	-	-	-
Clause-5.16.9(Hydrolysis)	-	-	-
Clause-5.16.10(Interlayer Bond Strength)	-	-	-
Clause-5.17(Eyelets)	-	-	-
Clause-5.18.1(Material)	-	-	-
Clause-5.18.2(Colour Fastness (Light, Washing))	-	-	-
Clause-5.18.3(Breaking Load and Tag Retention)	-	-	-
Clause-5.18.4.1(Lace to lace)	-	-	-
Clause-5.18.4.2(Lace to eyelet)	-	-	-
Clause-6, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	-	-
Clause-7(Marking)	-	-	-
Clause-5.5.4(Ergonomic Features)	-	-	-
Clause-5.7.4(Colour Fastness:Washing)	-	-	-
Cl-5.10.2(Colour fastness to washing)	-	-	-
Cl-5.11.2(Colour fastness to washing)	-	-	-
Cl-5.10.2(Colour fastness to light)	-	-	-
Cl-5.11.2(Colour fastness to light)	-	-	-
Cl-5.11.2(Colour fastness to perspiration)	-	-	-

31 May, 2028

-
-

IS 15844 : Part 2 (2023)

SPORTS FOOTWEAR PART -2 PERFORMANCE SPORTS FOOTWEAR

46850 View breakup
-

Clause No.	Exclusion	Remark
7.1.1(Whole Footwear)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.1.5(Energy Absorption at Seat Region)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.1.6(Complete Shoe Flexing)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.1.7(Washability)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.1.8(Slip Resistance)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.1.9(Heel Drop)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.2 , Table No. 2 , i)(Flexing resistance)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.2 , Table No. 2 , vii)(Tensile strength)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.2 , Table No. 3 , ii)(Elongation at break)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.3 , Table No. 4 , i)(Tear strength,)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/- .
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.4 , Table No. 5 , i)(Thickness)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.4 , Table No. 5 , ii)(Flexing index)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.5 , Table No. 6 , i)(Thickness)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.6 , Table No. 7 , iv)(Tear strength)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.6 , Table No. 7 , v)(Tensile strength)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.6 , Table No. 7 , vi)(Elongation at break)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/- .
7.6 , Table No. 7 , vii)(Compression set)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.7 , Table No. 8 , i)(Compression set)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.8 , Table No. 9 , ii)(Resilience)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.8 , Table No. 9 , v)(Peel strength)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.9 , Table No. 10 , i)(Peel strength)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.9 , Table No. 10 , ii)(Shear strength)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.10 , Table No. 11 , ii)(Needle strength,)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	We offer the package price for Bis sample only, For mechanical Test 23400/-, and For chemical Test l 23450/-

31 May, 2028

-
-

IS 17043 (2018)

Derby shoes - Specification

39950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuosness test IS 17011)	-	23450	23450/ - for chemical test (IS 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.15.2(Breaking load & tag retention)	-	0	We offer the package price for BIS sample .
4.15.1(Length of laces )	-	0	We offer the package price for BIS sample .
4.14(Eyelet pull out test)	-	0	We offer the package price for BIS sample .
4.13.8(Flex resistance )	-	0	We offer the package price for BIS sample .
4.13.7(Abrasion resistance )	-	0	We offer the package price for BIS sample .
4.13.6(Tear Strength)	-	0	We offer the package price for BIS sample .
4.13.5(Ageing test)	-	0	We offer the package price for BIS sample .
4.13.4(Hardness (IRHD))	-	0	We offer the package price for BIS sample .
4.13.3(Density )	-	0	We offer the package price for BIS sample .
4.13.2(Thickness )	-	0	We offer the package price for BIS sample .
4.12(Breaking Strength of thread)	-	0	We offer the package price for BIS sample .
4.11.2(Tear Strength)	-	0	We offer the package price for BIS sample .
4.11.1(Thickness )	-	0	We offer the package price for BIS sample .
4.9.2(Water absorption & desorption )	-	0	We offer the package price for BIS sample .
4.9.1(Thickness )	-	0	We offer the package price for BIS sample .
4.8.3(Water absorption & desorption )	-	0	We offer the package price for BIS sample .
4.8.2(Abrasion )	-	0	We offer the package price for BIS sample .
4.8.1(Thickness )	-	0	We offer the package price for BIS sample .
4.7.4(Water vapour permeability & coefficent )	-	0	We offer the package price for BIS sample .
4.7.3(Abrasion resistance )	-	0	We offer the package price for BIS sample .
4.7.2(Tear Strength)	-	0	We offer the package price for BIS sample .
4.7.1(Thickness )	-	0	We offer the package price for BIS sample .
4.6.4(Water penetration and water absorption)	-	0	We offer the package price for BIS sample .
4.6.3(Water vapour permeability & coefficent )	-	0	We offer the package price for BIS sample .
4.6.2(Tear Strength)	-	0	We offer the package price for BIS sample .
4.6.1(Thickness )	-	0	We offer the package price for BIS sample .
4.5.8(Energy absorption of seat region )	-	0	We offer the package price for BIS sample .
4.5.7(Cold insulation tester )	-	0	We offer the package price for BIS sample .
4.5.6(Heat insulation of sole complex)	-	0	We offer the package price for BIS sample .
4.5.5.1(Electrical Properties Antistatic )	-	0	We offer the package price for BIS sample .
4.5.4(Slip Resitance)	-	0	We offer the package price for BIS sample .
4.5.3.2(Interayer bond strength)	-	0	We offer the package price for BIS sample .
4.5.3.1(Upper/outsole bond strength)	-	0	We offer the package price for BIS sample .
4.5.2(Ergonomic Feature)	-	0	We offer the package price for BIS sample .
4.4(Height of upper )	-	0	We offer the package price for BIS sample .
4.5.3(Bond Strength)	-	0	We offer the package price for BIS sample .
4.9(Insocks)	-	0	We offer the package price for BIS sample .
6.3.1(Visual and Tactile Examination)	-	0	We offer the package price for BIS sample .

31 May, 2028

-
-

IS 17037 (2018)

Anti riot shoes - Specification

39950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuosness test IS 17011)	-	23450	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.16.2(Breaking load & lag retention)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.16.1(Length of laces )	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.15(D-ring and Hooks )	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.14.10(Resistance to fuel oil)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.14.9(Resistance to hot contact)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.14.8(Flex resistance)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.14.7(Abrasion resistance)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.14.6(Tear Strength)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.14.5(Ageing test)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.14.4(Hardness (IRHD))	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.14.3(Density )	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.14.2(Thickness )	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.13(Breaking Strength of thread)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.12.2(Tear Strength)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.12.1(Thickness )	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.11.2(Tear Strength)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.11.1(Thickness)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.10(Counter stiffener thickness)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.9.3(Water absorption & desorption )	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.9.2(Abrasion resistance )	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.8.3(Water absorption & desorption )	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.8.2(Abrasion resistance )	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.7.5(Water vapour permeability & coefficent )	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.7.4(Abrasion resistance )	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.7.3(Tear Strength)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.6.4(Water penetration and water absorption)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.6.3(Water vapour permeability & coefficent )	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.6.2(Tear Strength)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.6.1(Thickness )	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.5.11(Water resistance machine method)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.5.11(Water Resistance Tray method )	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.5.11(Thickness Toe puff & counter stiffener)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.5.10(Energy absorption of seat region )	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.5.9(Cold insulation of sole complex)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.5.8(Heat insulation of sole complex)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.5.7.1(Antistatic test)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.5.6.4(Compression resistance)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.5.6.3(Impact resistance )	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.5.6.2(Internal Toe cap length)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.5.5.4(Ageing test)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.5.5.3(Nail penetraion Insert )	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.5.5.2(Flex resistance )	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.5.5.1(Dimension)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.5.4(Slip Resitance)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.5.3.2(Interayer bond strength)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.5.3.1(Upper/outsole bond strength)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.5.2(Ergonomic Feature)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.4(Height of upper )	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.3.2(Weight)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.5.3(Bond strength)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.9(Insocks)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
5(Chemical Requirements)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .
4.4, Table 2(Height)	-	0	23450/- for chemical (IS 17011) & 16500/- FOR MECHANICAL TEST ). we offer the package price for Bis sample only .

31 May, 2028

-
-

IS 17012 (2018)

High ankle tactical boots with pu - Rubber sole - Specification

39950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuousness Test IS 17011)	-	23450	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.16.2(Breaking Strength of lace )	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.16.1(Length of lace )	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
6.1(Resistance to Fuel Oil)	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.14.9(Resistance to hot contact )	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.14.8(Flexing resistance )	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.14.7(Ageing test)	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.14.6(Hardness (IRHD))	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.14.5(Abrasion resistance )	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.14.4(Tear Strength)	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.14.3(Sole Density )	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.14.2(Thickness)	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.13(Breaking Strength of thread )	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.12.2(Tear Strength)	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.12.1(Thickness )	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.11.2(Tear Strength)	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.11.1(Thickness )	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.10.3(Water absorption & desorption percent)	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.10.2(Abrasion resistance )	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.9.3(Water absorption & desorption percent)	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.9.2(Abrasion resistance )	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.9.1(Thickness)	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.8(Thickness Toe puff & counter stiffener)	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.7.5(Water Vapour permeability & coefficient )	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.7.4(Abrasion resistance )	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.7.3(Tear Strength)	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.6.3(Water Penetration and water absorption )	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.6.2(Tear Strength)	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.6.1(Thickness )	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.5.8(Energy absorption of seat region )	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.5.7(Cold Insulation of sole complex)	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.5.6(Heat Insulation of sole Complex)	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.5.5(Antistatic test)	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.5.4(Slip Resitance)	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.5.3.2(Interayer bond strength)	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.5.3.1(Upper/outsole bond strength)	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.5.2(Ergonomic Feature)	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.4(Height of upper )	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.3.2(Weight)	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.
4.2(Design )	-	0	23450/- for chemical test ( 17011) & 16500/- for mechanical test . Both are the package price for BIS sample only.

31 May, 2028

-
-

IS 11226 (1993)

Leather safety footwear having direct moulded rubber sole specification (First Revision)

16500 View breakup
-

Clause No.	Exclusion	Remark
5.2(Materials)	-	we offer the package price for BIS sample only.
5.2.1(Materials)	-	we offer the package price for BIS sample only.
5.2.1.1(Materials)	-	we offer the package price for BIS sample only.
5.2.2(Materials)	-	we offer the package price for BIS sample only.
5.2.3(Materials)	-	we offer the package price for BIS sample only.
5.2.4(Materials)	-	we offer the package price for BIS sample only.
5.2.5(Materials)	-	we offer the package price for BIS sample only.
5.2.6(Materials)	-	we offer the package price for BIS sample only.
5.2.6.1(Materials)	-	we offer the package price for BIS sample only.
5.2.6.2(Materials)	-	we offer the package price for BIS sample only.
5.2.6.3(Materials)	-	we offer the package price for BIS sample only.
5.2.7(Materials)	-	we offer the package price for BIS sample only.
5.2.8(Materials)	-	we offer the package price for BIS sample only.
5.2.9(Materials)	-	we offer the package price for BIS sample only.
5.2.10(Materials)	-	we offer the package price for BIS sample only.
5.2.11(Materials)	-	we offer the package price for BIS sample only.
5.2.11.1(Materials)	-	we offer the package price for BIS sample only.
5.2.11.2(Materials)	-	we offer the package price for BIS sample only.
5.2.11.3(Materials)	-	we offer the package price for BIS sample only.
5.3(Components)	-	we offer the package price for BIS sample only.
5.5(Mass)	-	we offer the package price for BIS sample only.
5.4.8(Leg height)	-	we offer the package price for BIS sample only.
5.4(Dimension )	-	we offer the package price for BIS sample only.
5.3 & 5.4.2(Thickness of components )	-	we offer the package price for BIS sample only.
5.2.11.2(Flexing resistance)	-	we offer the package price for BIS sample only.
5.2.11.2(Resistance to Fuel Oil)	-	we offer the package price for BIS sample only.
5.2.11.2(Elongation at break)	-	we offer the package price for BIS sample only.
5.2.11.2(Tensile Strength)	-	we offer the package price for BIS sample only.
5.2.11.2(Hardness (Shore A))	-	we offer the package price for BIS sample only.
5.2.11(Flexing resistance)	-	we offer the package price for BIS sample only.
5.2.11(Elongation at break)	-	we offer the package price for BIS sample only.
5.2.11(Tensile Strength)	-	we offer the package price for BIS sample only.
5.2.11(Hardness (IRHD))	-	we offer the package price for BIS sample only.
5.2.11(Relative density )	-	we offer the package price for BIS sample only.

31 May, 2028

-
-

IS 10702 (1992)

Rubber hawal chappal - Specification (Second Revision)

16500 View breakup
-

Clause No.	Exclusion	Remark
5.4(Stud diameter)	-	we offer the package price for BIS sample only.
5.4(Tear strength )	-	we offer the package price for BIS sample only.
5.4(Hardness (shore A)- after ageing)	-	we offer the package price for BIS sample only.
5.4(Hardness (Shore A))	-	we offer the package price for BIS sample only.
5.4(Breaking strength )	-	we offer the package price for BIS sample only.
5.4(Tensile Strength )	-	we offer the package price for BIS sample only.
5.4(Relative density )	-	we offer the package price for BIS sample only.
5.4(Shrinkage test (at 100 C temp))	-	we offer the package price for BIS sample only.
5.4(Shrinkage test (at room temp))	-	we offer the package price for BIS sample only.
5.4(Split tear strength )	-	we offer the package price for BIS sample only.
5.4(Compression set)	-	we offer the package price for BIS sample only.
5.4(Hardness (Shore A))	-	we offer the package price for BIS sample only.
5.4(Relative density)	-	we offer the package price for BIS sample only.
5.3(Thickness )	-	we offer the package price for BIS sample only.
5.1(Shape & Design)	-	we offer the package price for BIS sample only.

31 May, 2028

-
-

IS 3736 (1995)

Canvas boots, rubber sole - Specification (Second Revision)

16500 View breakup
-

Clause No.	Exclusion	Remark
Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5. i) Tensile Length)	-	we offer the package price for BIS sample only.
Cl.4.1.7.4 Ageing(ii) Elongation at break)	-	we offer the package price for BIS sample only.
Cl.4.1.7.2 IS 3400 (Part 2) : 1980(2)Hardness, IRHD)	-	we offer the package price for BIS sample only.
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	we offer the package price for BIS sample only.
Cl.4.1.1 upper IS 1969(d) Picks/dm)	-	we offer the package price for BIS sample only.
Cl.4.4.5 ( Table 1.)(d) Picks/dm)	-	we offer the package price for BIS sample only.
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	we offer the package price for BIS sample only.
Cl.4.1.1 upper IS 1969(c) Ends/dm )	-	we offer the package price for BIS sample only.
Cl.4.1.7.2 IS 3400 (Part 4) : 1987 IS 3400 (Part 2) : 1980(Change in initial hardness after accelerated ageing for 24 h at l00 ± 1°C)	-	we offer the package price for BIS sample only.
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	we offer the package price for BIS sample only.
Cl.4.4.9(From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine)	-	we offer the package price for BIS sample only.
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Tensile strength in MPa, Min)	-	we offer the package price for BIS sample only.
Cl.4.1.3 Binding Material IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in Table 2, when tested in accordance with the methods referred to in col 4 of Table 2. 1)Width, mm. Min )	-	we offer the package price for BIS sample only.
Cl.4.4.3(The top, side and front edges of the quarters and tongue shall be bound with cotton tape NEWAR of not less than 13 mm width using variety No. 29 thread.)	-	we offer the package price for BIS sample only.
Cl.4.1.7.3 IS 3400 (Part 10) : 1977(Compression set, in percent. Max)	-	we offer the package price for BIS sample only.
Cl.4.4.4( The back of the quarter shall be reinforced with a strip, not less than 25 mm wide,of either upper material or canvas. In case of composite upper material the edges of the strip shall be bound by cotton tape ( NEWAR ). When canvas cloth is used the edges shall be folded and shall be stitched with two rows of stitching.)	-	we offer the package price for BIS sample only.
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Elongation at break, in percent, Min)	-	we offer the package price for BIS sample only.
IS 1969:1985(Breaking load on 50 cm test length. N, Min)	-	we offer the package price for BIS sample only.
4.1.6 Fabric Laces Cl.4.1.6.1(The laces shall have a minimum breaking load of 450 N, when tested between 18 cm grips, the rate of traverse of power actuated grip being 30 cm/min.)	-	we offer the package price for BIS sample only.
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles b)Cut growth at the end of 150 000 cycles, Percent, Max)	-	we offer the package price for BIS sample only.
Cl.4.1.1 upper IS 1969(Breaking load in N.Min (5 × 20 cm grip): a) Wrap)	-	we offer the package price for BIS sample only.
4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.)	-	we offer the package price for BIS sample only.
Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed in Table 6.)	-	we offer the package price for BIS sample only.
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	we offer the package price for BIS sample only.
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	we offer the package price for BIS sample only.
Cl.4.1.3.3( Black tapes shall be free from sulphur dyes when tested in accordance with Annex B.)	-	we offer the package price for BIS sample only.
4.1.6 Fabric Laces Cl.4.1.6.1(The two ends of the lace shall be provided with suitable metal or plastic tips. Black laces shall be free from sulphur dyes when tested in accordance with Annex B.)	-	we offer the package price for BIS sample only.
Cl.4.1.7 Rubber Components Cl.4.1.7.1( the soles and heels shall conform to Type 2 of IS 5676:1995.)	-	we offer the package price for BIS sample only.
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	we offer the package price for BIS sample only.
Cl.4.4.3( The upper shall be stitched on a lockstitch machine, with 30 to 40 stitches per decimetre by thread of variety No. 8 and variety No. 29 cotton sewing thread conforming to 4.1.5 using variety No. 29 for taping and binding and variety No. 8 for remaining seams. )	-	we offer the package price for BIS sample only.
Cl.4.4.6( A minimum of seven aluminium, brass or steel eyelets having 10 mm diameter and wall thickness 0.30 to 0.35 mm shall be fitted in each face.')	-	we offer the package price for BIS sample only.
Cl.4.4.8( A strengthening rubber arch piece shall be firmly pasted and stitched at the middle arch of the inside quarter. Another strengthening rubber piece, circular in shape 35 ± 1 mm in diameter, may bepasted and stitched at the centre of the inside)	-	we offer the package price for BIS sample only.
Cl.4.4.10( A 25 mm Min wide and 2 mm Min thick rubber golosh in serrated, diamond or any otherdesign, as agreed to between the purchaser and thesupplier, shall be fitted all round the sole edge of the boot. The golosh shall not extend below the edge of the sole.)	-	we offer the package price for BIS sample only.
Cl.4.6 Mass(The mass of finished boots, rubber sole, of size 8 shall not exceed 1130 g per pair, and the mass shall increase or decrease by 75 g per pair for each bigger or smaller size respectively.)	-	we offer the package price for BIS sample only.
Cl.4.9 Composite Breaking Strength Test( From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine.Rate of traverse of pulling jaw shall be 100 ± 5 mm per minute. Two such test pieces will be required to be obtained from the made up footwear and will be subjected to test to break each test piece. Mean value of each set of test pieces comprising of length wise and height wise test pieces will be 1 000 N/25 mm width minimum.')	-	we offer the package price for BIS sample only.

31 May, 2028

-
-

IS 3735 (1996)

Canvas Shoes, Rubber Sole

16500 View breakup
-

Clause No.	Exclusion	Remark
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	we offer the package price for BIS sample only.
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	we offer the package price for BIS sample only.
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	we offer the package price for BIS sample only.
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	we offer the package price for BIS sample only.
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	we offer the package price for BIS sample only.
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	we offer the package price for BIS sample only.
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	we offer the package price for BIS sample only.
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	we offer the package price for BIS sample only.
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	we offer the package price for BIS sample only.
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	we offer the package price for BIS sample only.
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	we offer the package price for BIS sample only.
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	we offer the package price for BIS sample only.
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	we offer the package price for BIS sample only.
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	we offer the package price for BIS sample only.
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	we offer the package price for BIS sample only.
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	we offer the package price for BIS sample only.
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	we offer the package price for BIS sample only.
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	we offer the package price for BIS sample only.
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	we offer the package price for BIS sample only.
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	we offer the package price for BIS sample only.
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	we offer the package price for BIS sample only.
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	we offer the package price for BIS sample only.
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	we offer the package price for BIS sample only.
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	we offer the package price for BIS sample only.
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	we offer the package price for BIS sample only.
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	we offer the package price for BIS sample only.
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	we offer the package price for BIS sample only.
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	we offer the package price for BIS sample only.
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	we offer the package price for BIS sample only.
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	we offer the package price for BIS sample only.
4.8(Adhesion )	-	we offer the package price for BIS sample only.
4.7(Consolidation test )	-	we offer the package price for BIS sample only.
4.6(Mass )	-	we offer the package price for BIS sample only.
4.3(Leg Height )	-	we offer the package price for BIS sample only.
4.1.6.2(Thickness of components )	-	we offer the package price for BIS sample only.
4.1.6.2(Ageing)	-	we offer the package price for BIS sample only.
4.1.6.2(Elongation at break after ageing )	-	we offer the package price for BIS sample only.
4.1.6.2(Tensile after ageing )	-	we offer the package price for BIS sample only.
4.1.6(Hardness (after accelerated ))	-	we offer the package price for BIS sample only.
4.1.6(Flexing resistance test)	-	we offer the package price for BIS sample only.
4.1.6(Hardness )	-	we offer the package price for BIS sample only.
4.1.6(Relative density)	-	we offer the package price for BIS sample only.
4.1.5(Sulpher dyes content )	-	we offer the package price for BIS sample only.
4.1.5(Breaking Load )	-	we offer the package price for BIS sample only.
4.1.4(Thickness)	-	we offer the package price for BIS sample only.
4.1.3(Color fastness to perspiration)	-	we offer the package price for BIS sample only.
4.1.3(Colorfastness to washing)	-	we offer the package price for BIS sample only.
4.1.3(Colorfastness to light )	-	we offer the package price for BIS sample only.
4.1.2(Colorfastness to washing)	-	we offer the package price for BIS sample only.
4.1.1 (Drill) (End & Picks/dm)	-	we offer the package price for BIS sample only.
4.1.1 (canvas )(End & Picks/dm)	-	we offer the package price for BIS sample only.
4.1.1 (Drill) (Colorfastness to light )	-	we offer the package price for BIS sample only.
4.1.1 (canvas )(Breaking Load )	-	we offer the package price for BIS sample only.

31 May, 2028

-
-

IS 15844 (2010)

Sports Footwear Specification

23400 View breakup
-

Clause No.	Exclusion	Remark
3.11(Corrosion resistance)	-	we offer the package price for BIS sample.
3.10(Ross Flex test)	-	we offer the package price for BIS sample.
3.10(Shape retention percent )	-	we offer the package price for BIS sample.
3.10(Collapsing load )	-	we offer the package price for BIS sample.
3.10(Crush load )	-	we offer the package price for BIS sample.
3.9(Lace abrasion test)	-	we offer the package price for BIS sample.
3.9(Griping Strength of Tags)	-	we offer the package price for BIS sample.
3.9(Colour migration / Colour fastness)	-	we offer the package price for BIS sample.
3.9(Breaking Strength )	-	we offer the package price for BIS sample.
3.8(Heat resistance tester )	-	we offer the package price for BIS sample.
3.8(Compression set )	-	we offer the package price for BIS sample.
3.8(Die-C tear Strength )	-	we offer the package price for BIS sample.
3.8(Tensile Strength)	-	we offer the package price for BIS sample.
3.7(Flexing index)	-	we offer the package price for BIS sample.
3.7(Abrasion resistance )	-	we offer the package price for BIS sample.
3.7(Water absorption & loss percent )	-	we offer the package price for BIS sample.
3.7(Tensile Strength)	-	we offer the package price for BIS sample.
3.6(Ross flexing )	-	we offer the package price for BIS sample.
3.6(Adhesion to mid sole )	-	we offer the package price for BIS sample.
3.6(Abrasion resistance )	-	we offer the package price for BIS sample.
3.6(Die-C tear Strength )	-	we offer the package price for BIS sample.
3.6(Trouser tear strength )	-	we offer the package price for BIS sample.
3.5(Heat resistance tester )	-	we offer the package price for BIS sample.
3.5(Adhesive to sole)	-	we offer the package price for BIS sample.
3.5(Compression set )	-	we offer the package price for BIS sample.
3.5(Die-C tear Strength )	-	we offer the package price for BIS sample.
3.5(Split tear strength )	-	we offer the package price for BIS sample.
3.5(Tensile Strength)	-	we offer the package price for BIS sample.
3.4(Colorfastness to light )	-	we offer the package price for BIS sample.
3.4(Colour fastness to crocking )	-	we offer the package price for BIS sample.
3.4(Tear Strength)	-	we offer the package price for BIS sample.
3.4(Tensile Strength)	-	we offer the package price for BIS sample.
3.4(Adhesive Strength )	-	we offer the package price for BIS sample.
3.4(Hydrolysis )	-	we offer the package price for BIS sample.
3.4(Upper flexing resistance )	-	we offer the package price for BIS sample.
3.3.4(Energy absorption of seat region )	-	we offer the package price for BIS sample.
3.3.3(Sole /midsole bond strength )	-	we offer the package price for BIS sample.
3.3.2(Upper/outsole bond strength)	-	we offer the package price for BIS sample.
3.3.1(Contruction)	-	we offer the package price for BIS sample.
3.2.3 & 3.2.4(Visual )	-	we offer the package price for BIS sample.
3.2.1(Design )	-	we offer the package price for BIS sample.

31 May, 2028

-
-

IS 15298 : Part 3 (2019)

Personal protective equipment: Part 3 protective footwear (Second Revision)

16500 View breakup
-

Clause No.	Exclusion	Remark
5.2.2 Table-2(Height of upper)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.3.1.2 Table-2(Upper/Outsole Bond)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
Table-2(Strength)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.3.2.2 Table-2(Internal Length of toe cap)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.3.2.3 Table-2(Impact Resistance -T- )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.3.2.4 Table-2(Compression)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.3.3 Table-2(Leak Proofness)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.3.4 Table-2(Specific Ergonomic)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.3.5.2 Table-2(Slip Resistance SRA)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.3.5.3 Table-2(Slip Resistance SRB)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.3.5.4 Table-2(Slip Resistance SRC)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.4.2 Table-2(Thickness)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5 4 3 Table-2(Tear Strength)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.4.4 Table-2(Tensile Properties)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.4.5 Table-2(Flexing Resistance)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.4.6 Table-2(Water Vapour Permeability & Coefficient)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5 4.8 Table-2(Hydrolysis)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.4 9 Table-2(Chrome VI)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.5.1 Table-2(Tear Strength)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.5.2 Table-2(Abrasion Resistance)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.5.3 Table-2(Water Vapour Permeability & Coefficient)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.5.4 Table-2(pH Value)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.5.5 Table-2(Chrome VI)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.6.1 Table-2(Tear Strength)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.6.2 Table-2(pH Value)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.6.3 Table-2(Chromium VI)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.7.1 Table-3(Thickness)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.7.2 Table-3(pH Value)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.7.3 Table-3(Water Absorption &)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.7.4.1 Table-3(Insole Abrasion)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.7.5 Table-3(Chromium VI)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.8.2 Table-2(Tear Strength)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.8.3 Table-3(Abrasion Resistance)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.8.4 Table-3(Flexing Resistance)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.8.5 Table-3(Hydrolysis)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.8.6 Table-2(Interlayer BondStrength)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.1 Table-I8(Penetration Resistance)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.2.1 Table-18(Electrical Properties)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.2.2 Table-18(Antistatic Footwear)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.2.3 Table-18(Electrically Insulated)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.3.1 Table-18(Heat Insulated Comp)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.3.2 Table-18(Cold Insulated)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.4 Table-18(Energy Absorption of seat region)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.5 Table-18(Water Resistance)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.8 Table-18(Cut Resistance)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.3 Table-18(Water Penetration & Absorption)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.4.1 Table-18(Resistance to Hot Contact)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.4.2 Table-18(Resistance to Fuel oil)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test

31 May, 2028

-
-

IS 15298 : part 4 (2017)

Personal protective equipment: Part 4 occupational footwear (Second Revision)

16500 View breakup
-

Clause No.	Exclusion	Remark
5.2.2.2(Height of upper)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.3.1.2(Upper/outsole bond strength)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.3.2.2(Leakproofness)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.3.2.3(Specific ergonomic features )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.3.4.1(Slip resistance)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.3.4.3(Slip resistance on steel floor with glycerine )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.3.4.4(Slip resistance on ceramic tile floor with SLS and on steel floor with glycerine )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.4.2.2(Thickness )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.4.2.3(Tear strenth)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.4.2.4(Tensile properties)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.4.2.5(Flexing resistance )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.4.2.6(Water vapour permeability and coefficient )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.4.2.7(pH value )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.4.2.8(Hydrolysis)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.4.2.9(Chromium VI content )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.5.2.1(Tear strength )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.5.2.2(Abrasion resistance )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.5.2.3(Water vapour permeability and coefficient )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.5.2.4(pH value )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.5.2.5(Chromium VI content )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.6.2.1(Tear strength )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.6.2.2(pH value )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.6.2.3(Chromium VI content )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.7.2.3(Water absorption and desorption )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.7.4.1(Abrasion resistance )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.7.2.5(Chromium VI content )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.8.1.1(Thickness )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.8.1.3(Cleat height)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.8.2.2(Tear strength )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.8.2.3(Abrasion resistance )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.8.2.4(Flexing resistance )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.8.2.5(Hydrolysis )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
5.8.2.6(Interlayer bond strength )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.1.1(Metallic anti-penetration insert )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.1.1.2(Non-metallic anti-penetration insert used as an insole)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.1.3(Dimensions )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.1.4(Flex resistance of penetration-resistant inserts )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.1.5.1(Corrosion resistance of penetration-resistant metallic inserts)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.1.5.2(Penetration-resistant non-metallic inserts)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.2.1(Conductive footwear)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.2.2(Antistatic footwear)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.3.1(Heat insulation of sole complex )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.3.2(Cold insulation of sole complex)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.2.4(Energy absorption of seat region )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.2.5(Water resistance )	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.2.6(Ankle protection)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.7.1(Cut resistance foot wear)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.7.3(Resistance to cutting)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.2.7.4(Pentration resistance)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.3.2.2(Upper- water penetration)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.4.2.1(Resistance to hot contact)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
6.4.2.2(Resistance to fuel oil)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
7(a)(Marking)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test
7(b)(Marking)	-	We offer the package price for BIS sample . For mechanical test 16500/- for chemical test ( IS 17011 ) 23450/- , additional charges will be applicable for additional mechanical test

31 May, 2028

-
-

IS 5557 : Part 2 (2018)

All rubber gum boots and ankle boots: Part 2 occupational purposes

15000 View breakup
-

Clause No.	Exclusion	Remark
3.1(VISUAL)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
3.2(specificgravity)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
3.3(specificgravity)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
3.4(specificgravity)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
3.5(visual)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
3.6(VISUAL)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
3.7(VISUAL)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
4(visual)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
5(visual)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
6(visual)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
7.1(visual)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
7.1.1(Tear strength)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
7.1.2(Abrasion resistance)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
7.2(all test of table 1)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
7.3(all test of table 2)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
7.4(Visual)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
7.4.1(all test of table 3)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
7.5(Visual)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
7.5.1(Tensile)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
7.5.2(Thickness)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
7.5.3(Upper flexing)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
7.6(VISUAL)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
7.6.1(Out sole thickness)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
7.6.2(out sole tear strength)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
7.6.3(out sole abrasion)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
7.6.4(out sole flexing)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
7.6.5(Interlayer bond strength)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
7.7(INSOCK Visual)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
7.7.1(Insock thickness)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
8(CONSTRUCTION)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
8.1(Hot contact)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
8.2(Leak proofness)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
8.3(Height of upper)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
8.4(Adhesion test)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
8.5(Resistance to acid & alkaline)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
8.6(Resistance to fule oil)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
8.7.1(Antistatic)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
8.7.2(CONDUCTIVE FOOTWEAR)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
8.7.3(Elecrically nsulating footwear)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
8.7.4(Resistance to cold)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
10(Visual OBSERVATION)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
11.1(Visual OBSERVATION)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
11.2(Visual OBSERVATION)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,
11.3(Visual OBSERVATION)	-	We offer the package price for BIS samples, For mechanical test 15000/- for chemical test 23450/- ,

31 May, 2028

-
-

IS 15298 : Part 2 (2016)

Personal protective equipment: Part 2 safety footwear (Second Revision)

16500 View breakup
-

Clause No.	Exclusion	Remark
5.2.2, Fig 4(Height of Upper, ISO 20344 , 6.2)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.2.3, Table 10 ,Design A(Seat Region)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.3.1.2(Upper/outer sole bond strength , ISO 20344 , 5.2)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.3.2.2,Table 5(Internal length of toecaps , ISO 20344 , 5.3)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.3.2.3,Table 6(Impact resistance of safety footwear,ISO 20344 , 5.4)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.3.2.4 ,Table 6(Compression Resistance of safety footwear ,ISO20344 , 5.5)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.3.2.5.1(Corrosion resistance of metallic toecaps ,ISO20344 , 5.6.2)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.3.3(Leak proofness ,ISO 20344 , 5.7)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.3.4(Specific ergonomic feature ,ISO 20344 , 5.1)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.3.5.2,Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.4.2, Table 11(Thickness , ISO 20344 , 6.1 )	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.4.3, Table 12(Tear Strength, ISO 20344 , 6.3 )	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.4.4, Table 13(Tensile properties ,ISO 20344 , 6.4.1 )	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.4.5, Table 14(Flexing resistance ,ISO 20344,6.5)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.4.6(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.4.7(Ph Value ; ISO 20344,6.9)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.6.3(Chromium VI content; ISO 17075)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.4.8(Hydrolysis ; ISO 20344,6.10)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.5.1,Table 15(Tear Strength, ISO 20344 , 6.3)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.5.2(Abrasion Resistance ;ISO 20344 , 6.12)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.5.3(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.5.4(Ph Value ; ISO 20344,6.9)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.5.5(Chromium VI content; ISO 17075)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.6(Tongue - IS 15298 Part 2 )	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.6.1,Table 16(Tear Strength, ISO 20344 , 6.3)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.6.2(Ph Value ; ISO 20344,6.9)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.7.1;Table 3(Thickness ; ISO 20344,7.1)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.7.2(Ph Value ; ISO 20344,6.9)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.7.3(Water Absorption and desorption ISO 20344,7.2 )	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.7.4.1(Insole ; ISO 20344,7.3 )	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.7.4.2(Insocks ; ISO 20344, 6.12)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.7.5(Chromium VI content; ISO 17075)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.8.1.1, Table 17(Thickness ; ISO 20344, 8.1.2)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.8.1.3, Table 17(Cleat height; ISO 20344, 8.1)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.8.2(Tear Strength, ISO 20344 , 8.2)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.8.3(Abrasion Resistance ;ISO 20344 , 8.3)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.8.4(Flexing resistance ,ISO 20344,8.4)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.8.5(Hydrolysis ; ISO 20344,8.5)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
5.8.6(Interlayer bond strength; ISO 20344, 5.2)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
6.2.1.1.1(Metallic anti-penetration insert; ISO 20344, 5.8.2)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
6.2.1.4(Flex resistance of penetration -resistant insert ; ISO 20344,5.9)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
6.2.1.5.1(Corrosion resistance of penetration -resistant metallic insert - ISO 20344, 5.6.3 &5.6.1)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
6.2.1.5.2(Penetration -resistant non-metallic insert ; EN 12568,6.4&7.4)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
6.2.3.1(Hear insulation of sole complex; ISO 20344,5.12 ;Annex B)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
6.2.3.2(Cold insulation of sole complex; ISO 20344,5.13)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
6.2.4(Energy absorption of seat region; ISO 20344,5.14)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
6.2.5(Water resistance ; 5.15.1 & 5.15.2)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
6.2.6.2 , Table 19(Impact resistance of metatarsal protective device,ISO 20344 , 5.16)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
6.2.7 (Ankle protection ; ISO 20344 , 5.17)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
6.2.8.4(Penetration Resistance)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
6.3(Upper--Water penetration and absorption ; ISO 20344 , 5.13)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
6.4.1(Resistance to hot contact ; ISO 20344 , 8.7)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test
6.4.2(Resistance to fuel oil ; ISO 20344 , 8.6.1& 8.6.2 ; )	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 23450/- , Additional charges will be applicable for additional mechanical test

31 May, 2028

-
-

IS 5852 : Part 1 (2019)

Toe caps for protection of feet - Specification: Part 1 metallic toe caps (Fifth Revision)

3000 View breakup
-

Clause No.	Exclusion	Remark
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	We offer package price of all test for BIS in this specification
4/4.1(REQUIREMENTS- Finishing)	-	We offer package price of all test for BIS in this specification
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	We offer package price of all test for BIS in this specification
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	We offer package price of all test for BIS in this specification
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	We offer package price of all test for BIS in this specification
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	We offer package price of all test for BIS in this specification
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	We offer package price of all test for BIS in this specification
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	We offer package price of all test for BIS in this specification
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	We offer package price of all test for BIS in this specification
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	We offer package price of all test for BIS in this specification

31 May, 2028

-
-

IS 5676 (1995)

Moulded solid rubber soles and heels - SpecificatlOn (Second Revision)

7650 View breakup
-

Clause No.	Exclusion	Remark
5/5.5- Table1(REQUIREMENTS-Thickness)	-	We offer package price of all test for BIS in this specification
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	We offer package price of all test for BIS in this specification
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	We offer package price of all test for BIS in this specification
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	We offer package price of all test for BIS in this specification
5/5.5- Table1(REQUIREMENTS-Thickness)	-	We offer package price of all test for BIS in this specification

31 May, 2028

-
-

IS 3976 (2018)

Safety Rubber Canvas Boots for Miners Ã¢â‚¬ Specification ( Sixth Revision )

16500 View breakup
-

Clause No.	Exclusion	Remark
Cl.5.2.5 Compact Sole Heel Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested as per corresponding test methods prescribed in col 4 of Table 2. i)i) Hardness (IRHD)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.6.3 Tear Strength of Compact Outsole( When outsoles are tested in accordance to 8.2 of IS 15298 (Part 1), the tear strength shall be not less than 8 kN/m for material having density higher than 0.9/cm³ and when density of material is less than or equal to 0.9 g/cm³, tear strength shall not be less than 5 kN/m.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.2.3 Coated Binding Material IS 1954( Coated binding materials shall conform to the requirements given in col 3 of Table 1 when tested according to the methods prescribed in col 4 of Table 1. i)Width in mm, )	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water coefficient as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.13 Energy Absorption Test(When footwear is tested in accordance with the method prescribed in 5.14 of IS 15298 (Part 1), the energy absorption of the seat region shall not be less than 20 J.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.2.3 Coated Binding Material Annex C(ii) Breaking load in N, Min (50 cm grip length test specimen) )	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water vapour permeability as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
CL.5.2.10 Counter Stiffener( A counter stiffener, made out of textile reinforced withpolymer/rubber including (thermoplastic) having thickness not less than 1.5 mm is to be stitched at inside of upper so as to fortify the back of the footwear at joints of quarter.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.2.1 Upper Cl.5.2.1.1 IS 3400(Part 5)( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load of 1.5 kg.))	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.2.1.2( Composite upper material shall comply with tear strength as per 5.4.3 of IS 15298 (Part 2).)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.2.1.3 , Cl.6.5 of IS 15298 (Part 1).( Composite upper material shall develop no cracks before 150 000 cycles when tested in accordance with 6.5 of IS 15298 (Part 1).)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.2.1.5( Inner layer of upper shall meet requirement of abrasion resistance as prescribed in 5.5.2 of IS 15298 (Part 2).)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.2.2 Compact Insole/Compact Insocks/Counter Stiffener Lining(Textile material shall be used as lining material for compact insole/compact insocks / counter stiffener. It shall meet the requirement of tear strength as prescribed in 5.6.1 of IS 15298 (Part 2).)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/ counter stiffener( When textiles used as lining for all the above are tested in accordance with 6.12 of IS 15298 (Part 1), the lining shall not develop any holes before the following number of cycles has been performed:)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.2.3.1 In case of cotton black binding materia( the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.2.5 Compact Sole Heel 5.2.5.1 IS 3400 (Part 4)(ii)*Change in hardness after accelerated ageing at 100 ± 2 °C for 24 h )	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.2.5.3 Ageing for whole footwear(When rubber is used for manufacturing boots or when the outer sole heel is made of bi-polymer, the finished boots shall be aged at 100 ± 2°C for 24 h. On completion of test, all rubber components shall not develop any sign of tackiness or brittleness.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.2.5.4 Thickness of compact sole hee(Thickness of compact sole heel of the boots shall comply with the thickness and material requirements prescribed in Table 3.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.2.5.4 Thickness of compact sole hee(of black cotton thread, the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.2.6 Thread for Upper Closing( The length (m/kg) and construction of sewing thread shall conform to requirements as prescribed in Table 4.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.2.8.1( The boots shall be provided with laces having minimum length of 115 cm for Type 1 and minimum 100 cm for Type 2.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.2.8.2 (Minimum breaking load of 60 kg is to be achieved when tested between 18 cm grip length in accordance with Annex C.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.2.8.3( In case of cotton lace of black colour, the same shall be free from sulphur dyes when tested in accordance with Annex B. Two ends of the laces shall be provided with plastic tips.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.2.9 Eyelets( Aluminum eyelets of external collar diameter not less than 10 mm and wall thickness of 0.30 to 0.35 mm shall be used.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.3.6( A designed foxing of width of minimum 25 mm and of thickness of minimum 2 mm is to be provided. The foxing shall not extend the edges of the outer sole.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.3.7( Two pairs of detachable insocks are to be provided. The insocks shall be compact in nature having thickness not less than 2 mm.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.5 Mass(The mass of one pair of finished footwear of size 8 shall not exceed 1 500 g for Type 1 and 1 400 g for Type 2 with an increase or decrease of 100 g for each bigger or smaller size, respectively.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.6( Height of Upper Height of upper of the boots shall conform to column 5 (Design C) and column 4 (Design B) of 5.2.2, Table 4 of IS 15298 (Part 2) for Type 1 and Type 2, respectively when measured as per 6.2 of IS 15298 (Part 1) on the inside of the back of the footwear and from seat of the insole to top edge of the upper.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.7 Performance Test(When safety footwear is tested in accordance with the method described in 5.4 of IS 15298 (Part 1), at an impact energy of (200 ± 4) J, the clearance under the toecap at the moment of impact shall be in accordance with Table 5. In addition, the toecap shall not develop any cracks which go through the material, that is, through which light can be seen.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.8 Upper/Outsole Bond Strength(When the footwear is tested in accordance with the method prescribed in 5.2 of IS 15298 (Part 1), the bond strength shall not be less than 4.0 N/mm, unless there is tearing of the sole in which case the bond strength shall not be less than 3.0 N/mm.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.9 Sole Interlayer Bond Strength for Bi-polymer( and Bi-density Sole When tested in accordance with 5.2 of IS 15298 (Part 1), the bond strength between the outer or cleated layer and the adjacent layer shall not be less than 4.0 N/mm unless there is tearing of any part of the sole, in which case the bond strength shall not be less than 3.0 N/mm.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.10 Consolidation Test( Representative sample of width 25 ± 0.5 mm are cut out from the quarter of the upper along the length of boot. The plies are separated by breaking the bond. Carry out the test on two specimens in accordance with IS 3400 (Part 5). Th)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.11 Compression Resistance( 5.11.1 When safety boots are tested in accordance with 5.5 of IS 15298 (Part 1), the clearance under the toe cap at a compression load of 15 kN ± 0.1 kN shall be in accordance with Table 5.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.5.12 Internal Length of Toe Cap( For safety boots, internal length of the toe cap shall meet the specification given in Table 5 of IS 15298 (Part 2) when tested as per 5.3 of IS 15298 (Part 1).)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.6.1 Abrasion Resistance of Compact Outsole( When outsole is tested in accordance with 8.3 of IS 15298 (Part 1), the relative volume loss shall not be greater than 250 mm³ for materials having density 0.9 g/cm³ or less, and not greater than 150 mm³ for materials with density greater than 0.9 g/cm³.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.6.2 Flexing Resistance of Compact Outsole( When outsole is tested in accordance with 8.4 of IS 15298 (Part 1), the cut growth shall not be greater than 4 mm before 30 000 cycles.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.6.4 Resistance to Hot Contact( — Sole Heel When sole heel is tested in accordance with 8.7 of IS 15298 (Part 1), the material shall not melt/deform and shall not develop any cracks when bent around the mandrel.)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
Cl.6.5 Hydrolysis( When bottom sole or other components are made out of polyurethane, the same shall be tested in accordance with 8.5 of IS 15298 (Part 1) and the same shall comply with 5.8.5 of IS 15298 (Part 2).)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
4(Types)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
5.1(Design)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
5.10(consolidation test IS 3400 (Part 5))	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
5.2.4(Reinforcing Material)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
5.10(Consolidation Test IS 3400 (Part 5) : 1986)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,
8(CHEMICAL REQUIREMENTS)	-	We offer the package price for BIS samples, For mechanical test 16500/- for chemical test 11350 /- ,

31 May, 2028

-
-

IS 12254 (1993)

Polyvinyl chloride (PVC) Industrial boots - Specification (First Revision)

10500 View breakup
-

Clause No.	Exclusion	Remark
4.2.3(Sulphur content )	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.5(Relative Density)	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.6(Volatility )	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.7(Lead Content )	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.1.1(Shape and Dimension)	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.3.1(Thickness)	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.3.2 Table 1(Thickness, Boot Upper, IS 12240 (Part 1))	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.3.2 Table 1(Thickness, Foxing strip, At the Heel, IS 12240 (Part 1))	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.3.2 Table 1(Thickness, Foxing strip , Elsewhere, IS 12240 (Part 1))	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.3.2 Table 1(Boot Bottom, Full Thickness, IS 12240 (Part 1))	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.3.2 Table 1(Boot Bottom, Full Thickness, IS 12240 (Part 1))	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.3.2 Table 1(Boot Bottom, Outsole only, IS 12240 (Part 1))	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.3.2 Table 1(Heel , Full Thickness, IS 12240 (Part 1))	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.3.2 Table 1(Heel, Wearing surface to filler Block,IS 12240 (Part 1))	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.4 Table 2(Hardness, IS 12240 (Part 2))	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.5(Relative Density, IS 12240 (Part 3))	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.6(Volatility, IS 12240 ( Part 2) )	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.8 Table 3(Tensile Requirements, Upper, IS 12240 ( Part 6) )	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.8 Table 3(Tensile Requirements, Upper, IS 12240 ( Part 6) )	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.8 Table 3(Tensile Requirements, Sole, IS 12240 (part 6))	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.8 Table 3(Tensile Requirements, Sole, IS 12240 (part 6))	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.9(Resistance to Cut Growth (Flexing test) for Sole, IS 12240 (Part 7))	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.1(Resistance to Flexing for Upper, IS 12240 (Part 8))	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.11(Leg Height, IS 12240 (part 9))	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.12(Leakage Resistance)	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.13(Cold Flex Temperature)	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,
5.15(Performance)	-	We offer the package price for BIS samples, For mechanical test 10500/- for chemical test 1600/- ,

31 May, 2028

-
-

IS 5557 (2004)

Industrial and protective rubber knee and ankle boots - Specification (Fourth Revision)

10000 View breakup
-

Clause No.	Exclusion	Remark
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	We offer package prize to BIS for all the test as per this specification .
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	We offer package prize to BIS for all the test as per this specification .
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	We offer package prize to BIS for all the test as per this specification .
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	We offer package prize to BIS for all the test as per this specification .
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	We offer package prize to BIS for all the test as per this specification .
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	We offer package prize to BIS for all the test as per this specification .
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	We offer package prize to BIS for all the test as per this specification .
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	We offer package prize to BIS for all the test as per this specification .
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	We offer package prize to BIS for all the test as per this specification .
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	We offer package prize to BIS for all the test as per this specification .
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	We offer package prize to BIS for all the test as per this specification .
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	We offer package prize to BIS for all the test as per this specification .
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	We offer package prize to BIS for all the test as per this specification .
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	We offer package prize to BIS for all the test as per this specification .
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	We offer package prize to BIS for all the test as per this specification .

31 May, 2028

-
-

IS 12254 (2021)

POLYVINYLCHLORIDE PVC INDUSTRIAL BOOTS - SPECIFICATION Second Revision

16500 View breakup
-

Clause No.	Exclusion	Remark
5.2(Size)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.3(Height)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.4.2(Ergonomic feature)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.4.3(Sole bond)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.4.4(Slip resistance)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.4.5(Leak proofness)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.4.6.1(Toe caps General)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.4.6.2(Internal length of toecaps)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.4.6.3(Corrosion resistance)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.4.6.4(Impact resistance)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.4.6.5(Compression resistance)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.4.7(Colour)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.5.1(Upper material)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.5.1(Upper Thickness)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.5.2(Upper tensile strength)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.5.3(Upper flexing)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.5.4(Upper Hardness)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.6.1(Lining material)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.6.2(Lining Tear strength)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.6.3(Lining abrasion)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.6.4(Lining adhesion with upper)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.7.1(Insole material)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.7.1(Insole thickness)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.7.2(Insole abrasion)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.7.3(Water absorption and desorption)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.8.2(Eyelets material)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.8.2(Lace material)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.8.2(Lace length)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.8.2(Lace breaking load)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.9.1(Insock material)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.9.2(Inscok abrasion resistance)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.9.3(Insock water absorption and desorption)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.8.2(Closing thread breaking load)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.11.1(Outsole material)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.11.1(Outsole thickness)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.11.2(Outsole density)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.11.3(Outsole Interlayer bond)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.11.4(Outsole tear)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.11.5(Outsole Abrasion)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.11.6(Outsole hardness)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.11.7(Outsole flexing)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.4.8.1(Conductive Footwear)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.4.8.2(Antistatic Footwear)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.4.8.3.2(Penetration resistance)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.4.8.4(Cut resistance)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.5.5(Upper Cold flex resistance)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.4.8.5(Outsole resistance to acid and alkali)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.4.8.6(Outsole resistance to fuel oil)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.11.8(Outsole cold flex resistance)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
6.1(Volatility)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
6.2(Lead content)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
Table 1 as per IS 17011 2018(pH)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
Table 1 as per IS 17011 2018(Phthalates (each individual phthalate))	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
Table 1 as per IS 17011 2018(Nickel, on skin contact)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
Table 1 as per IS 17011 2018(Allergenic and carcinogenic disperse dyes)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
Table 1 as per IS 17011 2018(Chromium (VI))	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
Table 1 as per IS 17011 2018(Dimethyl fumarate (DMFU))	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
Table 1 as per IS 17011 2018(Formaldehyde (free or released by partial hydrolysis))	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
Table 1 as per IS 17011 2018(Formaldehyde)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
Table 1 as per IS 17011 2018(Organotin compounds)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
Table 1 as per IS 17011 2018(PCP-TeCP-TriCP polychlorophenols)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
5.10(Closing Thread (If used))	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
Cl.6.1(Volatility- IS 12240 (Part 4))	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .
Cl.6.2(Lead Content-IS 12240 (Part 5),)	-	For mechanical test (Basic test) :16500/- For chemical test : 23450/- For Lead : 800/- For additional test : separate charges will be applicable .

31 May, 2028

-
Included w.e.f.18.06.2025

IS 15298 : part 4 (2024)

Personal Protective Equipment Part 4 Occupational Footwear (ISO 20347 : 2021, MOD) (Third Revision)

16500 View breakup
-

Clause No.	Exclusion	Remark
Cl 5.2(Design)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.2.2(" Height of upper ")	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.2.3(Heel area)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.1.1(Construction of whole footwear)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.1.2(Upper/outsole bond strength)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.2(Leak proofness)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.3(Specific ergonomic features)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.6(Seam strength)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.3.7(Lead Content ( National Annex A))	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.2(Thickness)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.3(Tear strength)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.5(Flexing resistance)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.6(Water vapour permeability and coefficient)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.4.7(Resistance to hydrolysis)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.5.2(Lining- Tear strength)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.5.3(Lining- Abrasion resistance)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.6.2(Tear strength of tongue)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.7.2(Water permeability of insock)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.8.2.1(Thickness of Outsole)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.8.2.2(Cleated area)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.8.2.3(Cleat height)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.8.3(Outsole- Tear strength)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.8.4(Outsole- Abrasion resistance)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.8.5(Outsole-Flexing resistance)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 5.8.7(Interlayer bond strength)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.1.2(Construction of perforation resistant insert)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.3.1(Heat insulation of outsole complex)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.3.2(Cold insulation of outsole complex)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.4(Energy absorption of seat region)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.5(Water resistance)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.6(Ankle protection)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.7.1(Cut resistance footwear- design)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.7.3(Resistance to cutting)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.8(Scuff cap)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.3(Upper — Water penetration and absorption)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.4.1(Resistance to hot contact - Outsole)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.4.3.2(Design of Ladder grip)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 6.4.3.4(Heel breast of Ladder grip)	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.
Cl 7("Marking ")	-	For mechanical Test (BASIC Test ) :16500/- For chemical test : 23450/- For Additional test : Charges will be extra.

31 May, 2028

-
Included w.e.f.18.06.2025

IS 15298 : Part 3 (2024)

Personal Protective Equipment Part 3 Protective Footwear (ISO 20346 : 2021, MOD) (Third Revision)

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.2.2(" Height of upper ")	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.2.3(Heel area)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.1.1(Construction of whole footwear)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.1.2(Upper/outsole bond strength)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.2.1(Toe protection - general)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.2.2(Internal length)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.2.3(Width of toecap flange)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.2.6(Impact resistance)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.2.7(Compression resistance)	-	9	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.3(Leak proofness)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.4("Specific ergonomic features ")	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.5.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.7(Seam strength)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.8(Lead Content ( National Annex A))	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.2(Thickness)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.3(Tear strength)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.6(Water vapour permeability and coefficient)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.7(Resistance to hydrolysis)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.5.2(Lining- Tear strength)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.5.3(Lining- Abrasion resistance)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.6.2(Tear strength of tongue)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.7.2(Water permeability of insock)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.8.2.1(Thickness of Outsole)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.8.2.2(Cleated area)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.8.2.3(Cleat height)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.8.3(Outsole- Tear strength)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.8.4(Outsole- Abrasion resistance)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.8.5(Outsole-Flexing resistance)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.8.7(Interlayer bond strength)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.1.2(Construction of perforation resistant insert)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.3.1(Heat insulation of outsole complex)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.3.2(Cold insulation of outsole complex)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.4(Energy absorption of seat region)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.5(Water resistance)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.6.1(Metatarsal protection - Construction)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.7(Ankle protection)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.8.2(Cut resistance footwear- design)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.8.3(Resistance to cutting)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.10("Slip resistance on ceramic tile floor with glycerine ")	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.3(Upper — Water penetration and absorption)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.4.1(Resistance to hot contact - Outsole)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.4.3.2(Design of Ladder grip)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.4.3.4(Heel breast of Ladder grip)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 7("Marking ")	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 7("Marking ")	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.5(Flexing resistance)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.9(Scuff cap)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.

31 May, 2028

-
Included w.e.f.18.06.2025

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

21000 View breakup
-

Clause No.	Exclusion	Remark
Cl 5.2(Design)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.2.2, Table 4(" Height of upper ")	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.2.3(Heel area)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.1.1(Construction of whole footwear)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.1.2(Upper/outsole bond strength)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.2.1(Toe protection - general)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.2.2(Internal length)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.2.3(Width of toecap flange)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.2.6(Impact resistance)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.2.7(Compression resistance)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.3(Leak proofness)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.4("Specific ergonomic features ")	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.7(Seam strength)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.3.8(Lead Content ( National Annex A))	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.2(Thickness)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.3(Tear strength)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.5(Flexing resistance)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.6(Water vapour permeability and coefficient)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.4.7(Resistance to hydrolysis)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.5.2(Lining- Tear strength)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.5.3(Lining- Abrasion resistance)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.6.2, Table 14(Tear strength of tongue)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.7.2(Water permeability of insock)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.8.2.2(Cleated area)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.8.2.3(Cleat height)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.8.3(Outsole- Tear strength)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.8.4(Outsole- Abrasion resistance)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.8.5(Outsole-Flexing resistance)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 5.8.7(Interlayer bond strength)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.1.2(Construction of perforation resistant insert)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.3.1(Heat insulation of outsole complex)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.3.2(Cold insulation of outsole complex)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.4(Energy absorption of seat region)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.5(Water resistance)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.6.1(Metatarsal protection - Construction)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.7(Ankle protection)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.8.2(Cut resistance footwear- design)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.8.3(Resistance to cutting)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.9(Scuff cap)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.3(Upper — Water penetration and absorption)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.4.1(Resistance to hot contact - Outsole)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.4.3.2(Design of Ladder grip)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 6.4.3.4(Heel breast of Ladder grip)	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.
Cl 7, Table 20("Marking ")	-	Only for All basis test 16500/- for chemical test 23450/- For any other additional test - Extra charges will be applicable.

31 May, 2028

-
Included w.e.f 30.04.2025

Bureau of Indian Standards

The National Standards Body of India

FOOTWEAR DESIGN AND DEVELOPMENT INSTITUTE

A-10/A GAUTAM BUDDTH NAGAR SECTOR 24 NOIDA, NOIDA, Gautam Buddha Nagar, Uttar Pradesh, 201301

9891994460 rajeshmishra@fddiindia.com

Scope List