BIS - LIMS (Laboratory Information Management System)

Customer Services & Development Center, HPCL-Mittal Energy Limited

Plot A27, Sector 65, Gautam Buddha Nagar, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

9988885236 satyajit.samanta@hmel.in

Scope List

Reset

2 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 10951 (2020)

Specification for Polypropylene ( PP ) Materials for Moulding and Extrusion ( Second Revision )

Specification of PP materials for Moulding & Extrusion

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.5.1,Table-3 or Clause 6.2.1.1(Melt Mass Flow-Rate (MFR) or Melt Flow Index,g/10min,IS 13360 (Part 4/Sec 1)/ASTM D1238)	-	1500	-
Clause 3.5.2,Table-4 or Clause 6.2.1.2(Flexural Modulus,Mpa,IS 13360 (Part 5/ Sec 7),ASTM D790)	-	2000	-
Clause 3.5.3,Table-5 or Clause 6.2.1.3(Izod Impact Strength,J/m,IS 13360 (Part 5/Sec 4)/ASTM D256)	-	2000	-
Clause 6.3.2,Table-8, Sl no.1(Tensile yield strength, Mpa,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	-
Clause 6.3.2,Table-8, Sl no.1(Elongation at yield, %, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	-
Clause 6.3.2,Table-8, Sl no.1(Tensile strength at break, Mpa, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	-
Clause 6.3.2,Table-8, Sl no.1(Elongation at break, percent, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	-
Clause 6.3.2,Table-8, Sl no.1(Charpy impact strength, KJ/m2, IS 13360 (Part 5/Sec 5))	-	2000	-
Clause 6.3.2,Table-8, Sl no.1(Hardness – Rockwell R, Shore D,IS 13360 (Part 5/Sec 13),IS 13360 (Part 5/Sec 11))	-	1500	-
Clause 6.3.2,Table-8, Sl no.2(Melting temperature,ᴼC,IS 13360 (Part 6/Sec 10))	-	4000	-
Clause 6.3.2,Table-8, Sl no.2(Temperature of deflection under load,°C,IS 13360 (Part 6/ Sec 3),IS 13360 (Part 6/ Sec 17))	-	2000	-
Clause 6.3.2,Table-8, Sl no.2(Vicat softening temperature, ᴼC,S 13360 (Part 6/Sec 1))	-	2000	-
Clause 6.3.2,Table-8, Sl no.4(Water absorption,%,IS 13360 (Part 8/ Sec 1))	-	1500	-
Clause 6.3.2,Table-8, Sl no.4(Density,kg/m3,IS 13360 (Part 3/ Sec 10),IS 13360 (Part 3/ Sec 11))	-	1500	-
Clause 3.5.1,Table-3 or Clause 6.2.1.1(Melt Mass Flow-Rate (MFR) or Melt Flow Index,g/10min,IS 13360 (Part 4/Sec 1)/ASTM D1238)	-	1500	-
Clause 3.5.2,Table-4 or Clause 6.2.1.2(Flexural Modulus,Mpa,IS 13360 (Part 5/ Sec 7),ASTM D790)	-	2000	-
Clause 3.5.3,Table-5 or Clause 6.2.1.3(Izod Impact Strength,J/m,IS 13360 (Part 5/Sec 4)/ASTM D256)	-	1999.99	-
Clause 6.3.2,Table-8, Sl no.1(Tensile yield strength, Mpa,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	1999.98	-
Clause 6.3.2,Table-8, Sl no.1(Elongation at yield, %, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	-
Clause 6.3.2,Table-8, Sl no.1(Tensile strength at break, Mpa, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	-
Clause 6.3.2,Table-8, Sl no.1(Elongation at break, percent, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	1999.99	-
Clause 6.3.2,Table-8, Sl no.1(Charpy impact strength, KJ/m2, IS 13360 (Part 5/Sec 5))	-	2000	-
Clause 6.3.2,Table-8, Sl no.1(Hardness – Rockwell R, Shore D,IS 13360 (Part 5/Sec 13),IS 13360 (Part 5/Sec 11))	-	1500	-
Clause 6.3.2,Table-8, Sl no.2(Melting temperature,ᴼC,IS 13360 (Part 6/Sec 10))	-	4000	-
Clause 6.3.2,Table-8, Sl no.2(Temperature of deflection under load,°C,IS 13360 (Part 6/ Sec 3),IS 13360 (Part 6/ Sec 17))	-	2000	-
Clause 6.3.2,Table-8, Sl no.2(Temperature of deflection under load,°C,IS 13360 (Part 6/ Sec 3),IS 13360 (Part 6/ Sec 17))	-	2000	-
Clause 6.3.2,Table-8, Sl no.2(Vicat softening temperature, ᴼC,S 13360 (Part 6/Sec 1))	-	2000	-
Clause 6.3.2,Table-8, Sl no.4(Water absorption,%,IS 13360 (Part 8/ Sec 1))	-	2000	-
Clause 6.3.2,Table-8, Sl no.4(Density,kg/m3,IS 13360 (Part 3/ Sec 10),IS 13360 (Part 3/ Sec 11))	-	1500	-
6.1(The material shall be uniform and free from foreign matter.)	-	1000	-

Complete

Included w.e.f. 16.07.2024 Exclusion: sample preparation facility for mechanical testing Cl.6.3.2 Table-8 1. Mechanical Properties a) Tensile yield strength, MPa b) Elongation at yield, percent c) Tensile strength at break, MPa d) Elongation at break, percent f) Hardness – Rockwell, R 2. Thermal Properties ºC d) Flammability, mm/min, e) Ignitability (Oxygen index), percent 3. Electrical Properties a) Relative permittivity b) Dissipation factor c) Volume resistivity d) Surface resistivity e) Dielectric strength Cl.6.4.1, 6.4.2

IS 7328 (2020)

Specification for Polyethylene Material for Moulding and Extrusion ( Third Revision )

Polyethylene

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1.1(Density)	-	1500	The test charge is in INR and for one sample
5.2.1.2(MFI)	-	1500	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Tensile strength at yield)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Elongation at yield)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Tensile strength at break)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Elongation at break)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec7)(Flexural modulas)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec4)(Izod/Charpy impact strength)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec11)(Shore Aor D hardness)	-	1500	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 11/Sec1)(Coeffiicient of friction)	-	1500	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 6/Sec3)(Heat deflection temperature)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 6/Sec1)(Vicat softening temperature)	-	2000	The test charge is in INR and for one sample
Annex B of IS 4984 5.3.2 Table6(Oxidation induction time)	-	4000	The test charge is in INR and for one sample
4 of IS 7016 (part 8)(Oven ageing)	-	1800	The test charge is in INR for 24 hrs
IS 13360(part 9/Sec7)(Specular gloss)	-	1500	The test charge is in INR and for one sample
IS 13360(part 9/Sec5)(Haze or luminious transmittance)	-	1500	The test charge is in INR and for one sample
IS 13360(part 9/Sec9)/ASTME313(Yellowness index or whiteness index)	-	1500	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec23)(Tear Strength)	-	2000	The test charge is in INR and for one sample
5.3.2 Table 6 IS 13360 (Part 5/Sec6)(Dart Impact strength)	-	2000	The test charge is in INR and for one sample

Complete

Scope may be restricted as 'For polymer resin only'

Bureau of Indian Standards

The National Standards Body of India

Customer Services & Development Center, HPCL-Mittal Energy Limited

Plot A27, Sector 65, Gautam Buddha Nagar, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

9988885236 satyajit.samanta@hmel.in

Scope List