BIS - LIMS (Laboratory Information Management System)

BIS, Eastern Regional Laboratory (ERL)

(1) Annex Building & Sample-Cell: Bureau of Indian Standards, P-230, CIT Scheme, VII- M, Block-W,Kankurgachi,Kolkata-700054 (2) Main building: 1/14, CIT Scheme VII M, VIP Road, Kankurgachi,Kolkata-700054, Kolkata, Kolkata, West Bengal, 700054

- erol@bis.gov.in

Scope List

Reset

302 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 5872 (2025)

Steel strapping for packaging ( Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause. 7.0 (Reverse Bend Test)	-
Clause. 6.0 (Tensile Test)	-
Clause. 6.0 (Elongation test)	-
Clause. 5.0 (Carbon)	-
Clause. 5.0 (Manganese)	-
Clause. 5.0 (Sulphur)	-
Clause. 5.0 (Phosphorus)	-

-
Excluding Salt spray test and micro alloying elements (V,Nb,B,Ti)

IS 12679 (2023)

By-Product Gypsum for Construction - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4, Table-1 (i) (P2O5, percent by mass, Max)	-
Cl-4, Table-1 (ii) (F, percent by mass, Max)	-
Cl-4, Table-1 (iii) (Na2 O, percent by mass, Max)	-
Cl-4, Table-1 (iv) (K2 O, percent by mass, Max)	-
Cl-4, Table-1 (v) (Organic matter, percent by mass, Max)	-
Cl-4, Table-1 (vi) (CaSO4.2H2O, percent by mass, Min)	-
Cl-4, Table-1 (vii) (Cl as NaCl, percent by mass, Max)	-
Cl-4, Table-1 (viii) (pH of 10 percent aqueous suspension of gypsum, Min)	-
Cl-4, Table-1 (ix) (free water, percent by mass, Max)	-

-
-

IS 18482 (2023)

Textiles - Sandwich extrusion laminated polypropylene PP woven sacks for packaging bulk commodities - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Sack Type)	-

-
Except UV Resistance and c

IS 14500 (1998)

Linearlow - Densitypolyethylene (Lldpe)Films - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1.1 (Appearance)	-
6.1.2 (Film form)	-
6.1.3 (Odour)	-
6.2.1 (Nominal Thickness and Nominal Width)	-

-
-

IS 15354 : Part 1 (2018)

Single - Use medical examination gloves: Part 1 specification for gloves made from rubber latex or rubber solution (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 & Table 2 (Size code)	-
6.1 & Table 2 (Descriptive size)	-
6.3.2 & Table 3 (Minimum force at break before accelerated ageing)	-
6.3.2 & Table 3 (Minimum Elongation at break before accelerated ageing)	-
6.3.3 & Table 3 (Minimum force at break after accelerated ageing)	-
6.3.3 & Table 3 (Minimum Elongation at break after accelerated ageing)	-
6.2 (Watertightness)	-
6.1 & Table 2 (Width corresponding to size code (dimension w,Figure 1))	-
6.1 & Table 2 (Width corresponding to Descriptive size (dimension w,Figure 1))	-
6.1 & Table 2 (Minimum length (dimension l, Figure 1))	-
6.1 & Table 2 (Minimum thickness (at locations shown in Figure 2))	-
6.1 & Table 2 (Maximum thickness (at approximate centre of palm))	-

-
-

IS 3667 (1993)

Textiles – B-twill jute cloth – Specification (second revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (General)	-
4.2 (General)	-
4.3 (General)	-
5.1, Table 1 (Corrected Mass per square meter, g)	-
5.1, Table 1 (Ends per dm, Tolerance)	-
5.1, Table 1 (Picks per dm, Tolerance)	-
5.1, Table 1 (Width, cm Tolerance)	-
5.1, Table 1 (Breaking Loade of Cloath)	-
5.1, Table 1 (Moisture Regain)	-
5.1, Table 1 (Oil Content)	-

-
-

IS 2566 (1993)

Textiles – B-twill jute bags for packing foodgrains – Specification (third revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl4.2( IS 9113 ) (HEMING AT THE MOUTH At the mouth of the bag, the raw edges of fabric shall be turned over first to a depth of minimum 18 mm and then to a depth of 20 mm minimum and the three layers of fabric thus formed shall be hemmed with jute yarns (see 5.1.2).)	-
Cl.4.5 ( Freedom from Defects The bags should be generally free from weaving and sewing defects which effect the performance of the bag, such as holes, cuts, tears, floats, crushed selvedges, soots, stains, gap stitches, loose ends and frayed ends.)	-
Cl.5.1 (IS 1954 : 1990) The bag shall conform to the requirements specified in Table 1. (i) Dimensions ( see Note ):)	-
Cl.5.1 1& Cl.8.5.2 of IS 9113 : 1993 The bag shall conform to the requirements specified in Table (Corrected mass per bag, g:)	-
Cl.5.1 (IS 1963 : 1990) The bag shall conform to the requirements specified in Table 1. (Ends per dm)	-
Cl.5.1 (IS 1963 : 1990) The bag shall conform to the requirements specified in Table 1. (Picks per dm)	-
Cl.5.1 (IS 1969 : 1990) The bag shall conform to the requirements specified in Table 1. (Breaking load of cloth ( Min ) ( revelled strip method. 10 × 20 cm ):)	-
Cl.5.1 (IS 9030 : 1990) The bag shall conform to the requirements specified in Table 1. (Scam breaking load ( Min ) ( revelled strip method, 5 × 20 cm ) N ( kgf ))	-
Cl4.3, Cl.4.3.1. See fig 1 & IS 9113 ( Seam For bags with hemming at the mouth, the sides of the bags shall be sewn with overhead or herakles stitches on selvedge through two layers of fabric ( see Fig. 1 ). The stitching shall be of even tension throughout with all the loose ends securely fastened. The number of stitches per 10 cm at the sides shall be between 9 and 11 ( see also IS 9113 : 1993 ).)	-
Cl4.3, Cl.4.3.1. See fig 1 & IS 9113 (For bags with selvedge at the mouth, the stitching of the raw edges of the bag shall be done after turning to a depth of 38 mm, with overhead or herakle stitches through four layers of the fabric ( see Fig. 2 ). The bottom of the bag shall be stiched at selvedge through two layers of the fabric with overhead or herakle stitch as the case may be ( see also IS 9113 :1993 ).)	-

-
-

IS 15138 (2024)

Textiles - Jute Bags For Packing 50 Kg Sugar - Specification (second revision)

All type

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
As per Clause 4.1 (Febric)	-
As per Clause 4.1.1 (Febric)	-
As per Clause 4.2 (Seam)	-
As per Clause 4.3 (Hemming at the mouth)	-
As per Clause 4.4 (Freedom from defects)	-
As per Clause 5,5.1,5.2(Table 1) (i). Dimension,(a.-outside length) (b.-outside width))	-
As per Clause 5,5.1,5.2(Table 1) (ii). Ends/dm)	-
As per Clause 5,5.1,5.2(Table 1) (iii). Picks/dm)	-
As per Clause 5,5.1,5.2(Table 1) (iv). Corrected mass per bags)	-
As per Clause 5,5.1,5.2(Table 1) (v). Average breaking load of sacking(a) warpway (b)weftway)	-
As per Clause 5,5.1,5.2(Table 1) (vi). Average breaking load of seam(a) warpway (b)weftway)	-
As per Clause 5,5.1,5.2(Table 1) (vii).Moisture regain)	-
As per Clause 5,5.1,5.2(Table 1) (viii).oil content)	-

-
30 bags + Yarns(1 Ply,3 Ply) + Fabric + 2 Ply Yarn if safety stitch present. Type to be declared.

IS 10258 : Part 1 (2022)

Sterile hypodermic syringes for single use Part 1: Syringes for manual use Third Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.2 (Limits of acidity or alkalinity, unit)	-
Cl. 6.3 (Difference in content of Distilled water(Pb, Sn, Zn & Fe), mg/kg, Max)	-
Cl. 6.3 (Cadmium, mg/kg, Max)	-
6.1 (General)	-
Cl. 6.3 (Difference in content of Distilled water(Pb, Sn, Zn & Fe), mg/kg, Max)	-

-
-

IS 8086 (1991)

Rehabilitation equipment - Wheelchairs, folding, junior size - Specification (First Revision)

All sizes except tests mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5.1 (Overall length )	-
Cl.5.1 (Overall width, open)	-
Cl.5.1 (Overall width , folded)	-
Cl.5.1 (Overall height)	-
Cl.5.1 (Sea t height from floor at the front )	-
Cl.5.1 (Armrest height from seat)	-
Cl.5.1 (Slope of the scat)	-
Cl.5.1 (Seat width )	-
Cl.5.1 (Seat depth)	-
Cl.5.1 (Distance between seat and footrest)	-
Cl.5.1 (Clearance of frame from floor )	-
Cl.5.1 (Clearance of foot rest from floor)	-
Cl.5.1 (Wheel diameter)	-
Cl.5.1 (Weight of the wheelchair ( basic model ))	-
Cl. 7.1 (Backrest and Seat)	-
Cl. 7.2 (Frame)	-
Cl. 7.3 (Footrests and Supports)	-
Cl. 7.5 (Hand Rims)	-
Cl. 7.6 (Brakes )	-
Cl. 7.7 ( Castors)	-
Cl. 7.8 (Wheels)	-
Cl. 7.9 (Clothing Guards)	-
Cl. 7.10 (Folding Mechanism)	-
Cl. 7.11 (Lubrication)	-
Cl. 8 (Finish)	-
Cl. 9.3 (Load Test)	-

-
-

IS 2266 (2019)

Steel wire ropes for general engineering purpose - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Rope Size and Tolerance )	-
5 (Minimum Breaking Force)	-
8 (a) Fibre Core)	-
8.2 (Steel Core)	-
Clause 10 (Mass of Zinc Coating)	-
Clause 10 (Uniformity of Coating)	-
Clause 6 of IS 2266, IS 6594 Clause 7 (Freedom from defect)	-
Clause 6 of IS 2266, IS 6594 Clause 10.3.1.1 (Tensile Test (Individual Wire))	-
Clause 6 of IS 2266, IS 6594 Clause 10.3.1.1 (Torsion Test (Indiviual Wire))	-
Clause 6 of IS 2266, IS 6594 Clause 10.3.1.1 (Reverse Bend test (Individual Wire))	-
Clause 6 of IS 2266, IS 6594 Clause 10.3.6 (Diameter of Wire)	-

-
-

IS 2365 (2018)

Steel wire suspension ropes for lifts, elevators and hoists - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 4, Table 1 to 5 (Diameter)	-
Cl. 5, Table 1 to 5 (Breaking force of rope with fibre core- IS 6594)	-
Cl. 5, Table 1 to 5 (Breaking force of rope with steel core - IS 6594)	-
Cl. 6.1 (Core)	-
Cl. 6.4 (Mass of Zinc Coating- IS 6745)	-
Cl. 6.4 (Uniformity of zinc coating- IS 2633)	-
Clause-6.4 (CARBON)	-
Clause-6.4 (SULPHUR)	-
Clause-6.4 (PHOSPHURS)	-
Clause-6.4 (MANGANESE)	-
Clause-6.4 (SILICON)	-

-
-

IS 3626 (2001)

Locked coil winding ropes - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1-Table-1 (Diameter - IS 3626)	-
4.2 (Length - IS 3626)	-
4.1-Table-1 (Diameter - IS 3626)	-
5.3-Table-1 (Carbon - IS 1835)	-
5.3-Table-1 (Manganese - IS 1835)	-
5.3-Table-1 (Silicon - IS 1835)	-
5.3-Table-1 (Sulphur - IS 1835)	-
5.3-Table-1 (Phosphorur - IS 1835)	-
5.3-Table-1 (Copper - IS 1835)	-
5.3-Table-1 (Nickle - IS 1835)	-
5.3-Table-1 (Chromium - IS 1835)	-

-
-

IS 1363 : Part 3 (2018)

Hexagon Head Bolts, Screws and Nuts of Product Grade ˜C ™ Part 3 (Style 1) Hexagon Nuts ( Size Range M 5 to M 64 ) ( Fifth Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3-Table 2 (Dimensions-D)	-
3-Table 1 (Dimensions-P)	-
4-Table 3 (General requirements)	-
4-Table 3 (Mechanical property-Rockwell hardness (ISO 898-1) HRB)	-
4-Table 3 (Mechanical property-Rockwell hardness (ISO 898-1) HRC)	-
4-Table 3 (Mechanical property-Surface integrity (ISO 898-1)-- Quench cracks (ISO 6157-3))	-
4-Table 3 (Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-
4-Table 3 (Mechanical property-Surface integrity (ISO 898-1)-Damages - (ISO 6157-3))	-
4-Table 3 (Mechanical property-Impact strength (ISO 898-1))	-
4-Table 3 (Mechanical property-Percentage reduction of area after fracture for machined test pieces (ISO 898-1))	-

-
-

IS 8856 (1991)

Hexagon weld nuts - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Hardness)	-
3 (Material)	-
3 (Dimensions)	-
3 (Thread)	-

-
-

IS 18809 (2024)

Wear and abrasion resistant steel sheet and plate ï¿½ Specification

For all grades except for the tests mentioned in remarks.

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.1 (Table-5) (Hardness Test)	-
8.2 (Tensile test)	-
8.3 (Table 7) (Bend Test)	-
8.4 (Table 8) (Charpy V-Notch- Impact Test)	-
11 (Freedom From Defects)	-
12 (Dimenstions and Tolerences)	-
Cl.7 (Carbon - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.7 (Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.7 (Silicon - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.7 (Phosphorus - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.7 (Sulphur - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.7 (Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.7 (Molybdenum - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.7 (Nickel - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.7 (Nitrogen - IS 228 and its parts or any other intrumental/chemical methods)	-

-
Hardness: Available for thickness above 15 mm. Charpy impact: Available for -20 degree Celsius. Test facility not available for Non-destructive test

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
12.2, Table-1 (Measurement of diameter of individual aluminium wire)	-
12.3, Table-1 (Breaking load before stranding)	-
12.3, Table-1 (Breaking load after stranding)	-
12.4 (Wrapping test)	-
12.5, Table 1 (Resistance test)	-
12.6, Table 3 (Measurement of lay ratio)	-
9.3 (Stranding)	-
6 (Freedom from defects)	-
7.2.1 (Sizes)	-
8, 8.1, 8.2 (Joint in wires, except during stranding)	-
9.2 (Lay ratio)	-
9.4 (Multiple layer of wires)	-

-
-

IS 17509 (2021)

Disposable Baby Diaper Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause no.7.3 (Hygiene Testing Requirement, Total Viable Count)	-
Clause no.7.3 (Hygiene Testing Requirement, Staphylococcus Aureus)	-
Clause no.7.1 (pH Value)	-
Clause no.7.5 (Phthalate Test)	-
Clause no.7.2 Table-2 (Rate of Absorption (All Sizes))	-
Clause no.7.2 Table-2 (Rewet under Load (All Sizes))	-
Clause no.7.2 Table-2 (Minimum absorption Capacity (X Large))	-
Clause no.6 (Type and Size: FOR X LARGE)	-

-
-

IS 17508 (2020)

Disposable Adult Incontinence Diaper - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause no.7.3 (Hygiene Testing Requirement, Total Viable Count)	-
Clause no.7.3.2 (Hygiene Testing Requirement, Staphylococcus Aureus)	-

-
-

IS 5557 : Part 1 (2024)

All Rubber Gum Boots and Ankle Boots Part 1 Safety and Protective

For all type and veriety

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5 (Design)	-
6 (Sizes and Fittines)	-
7 (Consturction)	-
8.1 (Lining Material)	-
8.2, Table-1 (i) (Width, mm, Min)	-
8.2, Table-1 (ii) (Breaking load, N, Min (50 cm grip length test specimen))	-
8.3, Table-2 (i) (Sewing thread for piping/binding")	-
8.4 (Use of Rubber material)	-
8.4.1, Table-3 (i) (Hardness, (IRHD))	-
8.4.1, Table-3 (ii) (Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h)	-
8.5 (Upper material)	-
8.5.1 (Tensile Strength of upper)	-
8.5.2 (Thickness)	-
8.5.3 (Flexing Resistance)	-
8.5.4 (Abrasion Resistance)	-
8.6.1 (Thickness of Outsole)	-
8.6.2 (Tear Strength)	-
8.6.3 (Abrasion Resistance of Outsole)	-
8.6.4 (Flexing Resistance)	-
8.6.5 (Inter layer Bond Strength of outsole)	-
Cl-8.7 (Insocks material)	-
8.7.1 (Thickness of Insocks)	-
Cl-8.7.2 (Abrasion Resistance of Insock)	-
Cl-8.8.1 (Outsole/Heel)	-
Cl-8.9 (Leak Proof Test)	-
8.10 (Height of Upper)	-
8.11 (Adhesion Test for Rubberized Textile Upper)	-
Cl-8.12 (Upper Outsole Bond Strength)	-
Cl-8.13 (Internal Length of Toe Cap)	-
Cl-8.14 (Impact Resistance of Safety Footwear)	-
Cl-8.15 (Compression Resistance of Safety Footwear)	-
8.18 (Corrosion Resistant Test for Toe Caps)	-
9.1 (Penetration Resistance)	-
9.6 (Resistance to Fuel Oil)	-
11.2 (Marking)	-

-
Mech- Except Slip resistance (Cl 8.17), Flame resistance property (Cl 9.3), Resistance to Acid & Alkali (Cl 9.5)

IS 5145 (1969)

Specification for walking sticks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-2.1 (Wood)	-
Cl.2.2 (ALUMINIUM)	-
Cl.4 (MANUFACTURE)	-
Cl.5 (WORKMANSHIP AND FINISH)	-
Cl.6.1 (STRENGTH TEST)	-
Cl.7 (MARKING)	-
Cl.8 (PACKING)	-

-
Mech- Except Material (Cl 2)

IS 13995 (1995)

Unlined moulded rubber boots - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Thickness )	-
5.1.1 (Tensile Strength (before ageing))	-
5.1.2 (Tensile Strength (after ageing))	-
5.1.3 (Tear Strength)	-
5.1.4 (Resistance to dry heat ageing )	-
5.1.5 (Flexing resistance of upper)	-
5.1.7 (Size)	-
5.1.6 (Design)	-
6, 6.1 (Marking)	-
Cl.6, 6.1 (Marking)	-

-
-

IS 4759 (1996)

Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 Table 1, 9.2, 9.2.1 ,9.2.2 (Msaa of Zinc Coating - IS 4759 IS 6745 IS 3203 IS 6012 )	-
9.4 (Adhesion of Galvanizing coating - IS 2629 )	-
6.2 & 6.4 (Freedom from Defects - IS 4759)	-
9.3 (Uniformity of Zinc Coating - IS 4759 IS 2633 )	-
10 (Marking)	-
9.3 (Uniformity of Zinc Coating - IS 4759 IS 2633 )	-
6.2 & 6.4 (Freedom from Defects - IS 4759)	-
6.1 Table 1, 9.2, 9.2.1 ,9.2.2 (Msaa of Zinc Coating - IS 4759 IS 6745 IS 3203 IS 6012 )	-
9.4 (Adhesion of Galvanizing coating - IS 2629 )	-
6.2 & 6.4 (Freedom from Defects - IS 4759)	-
6.1 Table 1, 9.2, 9.2.1 ,9.2.2 (Msaa of Zinc Coating - IS 4759 IS 6745 IS 3203 IS 6012 )	-
9.3 (Uniformity of Zinc Coating - IS 4759 IS 2633 )	-
9.4 (Adhesion of Galvanizing coating - IS 2629 )	-
6.2 & 6.4 (Freedom from Defects - IS 4759)	-
6.1 Table 1, 9.2, 9.2.1 ,9.2.2 (Msaa of Zinc Coating - IS 4759 IS 6745 IS 3203 IS 6012 )	-
9.3 (Uniformity of Zinc Coating - IS 4759 IS 2633 )	-
9.4 (Adhesion of Galvanizing coating - IS 2629 )	-
6.2 & 6.4 (Freedom from Defects - IS 4759)	-

-
Mech: Complete

IS 3954 (1991)

Hot Rolled Steel Channel Sections for General Engineering Purposes - Dimensions

For all sizes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
Mech: Complete

IS 2255 (1977)

Specification for mild steel wire rod for the manufacture of machine screws (By Cold Heading Process) (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (Sizes and tolernces)	-
8 (FREEDOM FROM DEFECTS)	-
Cl. 5.1 (Carbon- Relevant parts of IS 228.)	-
Cl. 5.1 (Sulphur- Relevant parts of IS 228.)	-
Cl. 5.1 (Phosphorus- Relevant parts of IS 228.)	-
Cl. 5.1 (Manganese- Relevant parts of IS 228.)	-

-
-

IS 16984 (2024)

Coated Folding Box Board for General Consumer Product Packaging â Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (General)	-
5.2 (Squareness)	-
5.4 (Dimensions)	-
5.5 (Size)	-
5.6 (Print Resistance and Ink Adhesion of Printed Cartons)	-
5.8 (Strength)	-
Table 1 (Gloss 75°)	-
Table 1 (Gloss 75°)	-
Table 1 (Gloss 75°)	-

-
-

IS 3989 (2024)

CENTRIFUGALLY CAST (SPUN) IRON SPIGOT AND SOCKET PIPES, FITTINGS AND ACCESSORIES ï¿½ SPECIFICATION (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-7 (SIZES)	-
Cl-8 (TOLERANCES)	-
Cl-5 (HAMMER TEST)	-
Cl-8.1 (i) (External diameter of barrel, DE)	-
Cl-8.1 (ii) (Internal diameter of socket, DI)	-
Cl-8.1 (iii) (Depth of socket, P)	-
Cl-9 (Coating)	-

-
-

IS 18800 (2023)

Stainless steel feeding bottle for infants -- Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1.2 (Manufacture, Workmanship, Finish and Appearance)	-
5.1.3 (Wall Thickness)	-
5.3.1 (Leakage Test)	-
5.3.2 (Drop Test)	-
5.3.3 (Compressive Deformation Resistance)	-
5.2 (Mechanical Requirements)	-
Cl.4.1 (Carbon - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.1 (Silicon - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.1 (Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.1 (Nickel - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.1 (Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.1 (Sulphur - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.1 (Phosphorous - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.1 (Nitrogen - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.1 (Molybdenum - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.1 (Copper - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.1 (Other Elements - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.5.3.4 (Permanency of Pigments - Annex D of IS 18800)	-

-
For raw material testing please see status for relevant IS.

IS 3521 : Part 5 (2021)

Personal Fall Arrest Systems Specification Part 5 Connectors with self-closing and self-locking gates

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause No. 4.1 (General requirement)	-
Clause No. 4.2.1 (" Gate-face resistance ")	-
Clause No. 4.2.2 (" Gate side-load resistance ")	-
Clause No. 4.3 ("Static strength ")	-
Clause No. 4.4 (" Corrosion resistance ")	-
Clause No. 6.2 (Marking)	-

-
-

IS 444 (2017)

Rubber hoses, textile - Reinforced, for general - Purpose water applications - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Classification - IS 444)	-
5 (Lining - IS 444)	-
5 (Reinforcement - IS 444)	-
5 (Cover - IS 444)	-
5 (Lining and Cover - IS 444)	-
6.1- Table 1 (Internal diameters - ISO 4671)	-
6.2 (Concentricity - ISO 4671)	-
6.3 (Length -IS 4671)	-
6.4 ( thickness of the lining plus cover - ISO 4671)	-
6.4 (If the cover is fluted, the depth of the flutes - ISO 4671)	-
7.1 - Table 2 ( tensile strength of Lining - ISO 37 )	-
7.1 - Table 2 ( tensile strength of Cover - ISO 37 )	-
7.1 - Table 2 (elongation at break of Cover - ISO 37)	-
7.1 - Table 2 (Change in tensile strength of Lining from original value after ageing(max) - ISO 188 and ISO 37)	-
7.1 - Table 2 (Change in elongation at break of Lining from original value after ageing (max.) - ISO 188 and ISO 37)	-
7.1 - Table 2 (Change in elongation at break of Cover from original value after ageing (max.) - ISO 188 and ISO 37)	-
7.2 - Table 3 (Proof pressure at 23 °C - ISO 1402)	-
7.2 - Table 3 (Change in length at proof pressure - ISO 1402)	-
7.2 - Table 3 (Minimum burst pressure - ISO 1402)	-
7.2 - Table 3 (Adhesion between components - ISO 8033)	-
7.2 - Table 3 (Ozone resistance - ISO 7326)	-
7.2 - Table 3 (Flexibility at 23 °C - Method A of ISO 1746)	-
7.2 - Table 3 (Low-temperature flexibility - Method B of ISO 4672)	-

-
-

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Eastern Regional Laboratory (ERL)

(1) Annex Building & Sample-Cell: Bureau of Indian Standards, P-230, CIT Scheme, VII- M, Block-W,Kankurgachi,Kolkata-700054 (2) Main building: 1/14, CIT Scheme VII M, VIP Road, Kankurgachi,Kolkata-700054, Kolkata, Kolkata, West Bengal, 700054

- erol@bis.gov.in

Scope List