BIS - LIMS (Laboratory Information Management System)

BIS, Eastern Regional Laboratory (ERL)

(1) Annex Building & Sample-Cell: Bureau of Indian Standards, P-230, CIT Scheme, VII- M, Block-W,Kankurgachi,Kolkata-700054 (2) Main building: 1/14, CIT Scheme VII M, VIP Road, Kankurgachi,Kolkata-700054, Kolkata, Kolkata, West Bengal, 700054

- erol@bis.gov.in

Scope List

Reset

327 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 4759 (1996)

Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 Table 1, 9.2, 9.2.1 ,9.2.2 (Msaa of Zinc Coating - IS 4759 IS 6745 IS 3203 IS 6012 )	-
9.4 (Adhesion of Galvanizing coating - IS 2629 )	-
6.2 & 6.4 (Freedom from Defects - IS 4759)	-
9.3 (Uniformity of Zinc Coating - IS 4759 IS 2633 )	-
10 (Marking)	-
9.3 (Uniformity of Zinc Coating - IS 4759 IS 2633 )	-
6.2 & 6.4 (Freedom from Defects - IS 4759)	-
6.1 Table 1, 9.2, 9.2.1 ,9.2.2 (Msaa of Zinc Coating - IS 4759 IS 6745 IS 3203 IS 6012 )	-
9.4 (Adhesion of Galvanizing coating - IS 2629 )	-
6.2 & 6.4 (Freedom from Defects - IS 4759)	-
6.1 Table 1, 9.2, 9.2.1 ,9.2.2 (Msaa of Zinc Coating - IS 4759 IS 6745 IS 3203 IS 6012 )	-
9.3 (Uniformity of Zinc Coating - IS 4759 IS 2633 )	-
9.4 (Adhesion of Galvanizing coating - IS 2629 )	-
6.2 & 6.4 (Freedom from Defects - IS 4759)	-
6.1 Table 1, 9.2, 9.2.1 ,9.2.2 (Msaa of Zinc Coating - IS 4759 IS 6745 IS 3203 IS 6012 )	-
9.3 (Uniformity of Zinc Coating - IS 4759 IS 2633 )	-
9.4 (Adhesion of Galvanizing coating - IS 2629 )	-
6.2 & 6.4 (Freedom from Defects - IS 4759)	-

-
Mech: Complete

IS 3954 (1991)

Hot Rolled Steel Channel Sections for General Engineering Purposes - Dimensions

For all sizes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
Mech: Complete

IS 2255 (1977)

Specification for mild steel wire rod for the manufacture of machine screws (By Cold Heading Process) (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (Sizes and tolernces)	-
8 (FREEDOM FROM DEFECTS)	-
Cl. 5.1 (Carbon- Relevant parts of IS 228.)	-
Cl. 5.1 (Sulphur- Relevant parts of IS 228.)	-
Cl. 5.1 (Phosphorus- Relevant parts of IS 228.)	-
Cl. 5.1 (Manganese- Relevant parts of IS 228.)	-

-
Chem: Complete

IS 16984 (2024)

Coated Folding Box Board for General Consumer Product Packaging â Specification (First Revision)

All types

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (General)	-
5.2 (Squareness)	-
5.4 (Dimensions)	-
5.5 (Size)	-
5.6 (Print Resistance and Ink Adhesion of Printed Cartons)	-
5.8 (Strength)	-
Table 1 (Gloss 75°)	-
Table 1 (Gloss 75°)	-
Table 1 (Gloss 75°)	-

-
Facility not available for Specific Requirements for Items in Contact with Food: Clause 5.10.1, OBA (optical brightening agent), Anthraquinone, Clause 5.10.2, Dioxins and Furans, Clause 5.10.2, Table 2, S.No v: Pentachlorophenol (PCP), Clause 5.10.2, Table 2, S.No vi: Polychlorinated biphenyls (PCBs), Cl 5.3 Thickness, Cl 5.7 Stiffness, Cl 5.9 table 1 - bulk, Cobb, Brightness, Gloss, IGT Dry Pick, Roughness.

IS 3989 (2024)

CENTRIFUGALLY CAST (SPUN) IRON SPIGOT AND SOCKET PIPES, FITTINGS AND ACCESSORIES ï¿½ SPECIFICATION (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-7 (SIZES)	-
Cl-8 (TOLERANCES)	-
Cl-5 (HAMMER TEST)	-
Cl-8.1 (i) (External diameter of barrel, DE)	-
Cl-8.1 (ii) (Internal diameter of socket, DI)	-
Cl-8.1 (iii) (Depth of socket, P)	-
Cl-9 (Coating)	-

-
Except hydrostatic test

IS 18800 (2023)

Stainless steel feeding bottle for infants -- Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1.2 (Manufacture, Workmanship, Finish and Appearance)	-
5.1.3 (Wall Thickness)	-
5.3.1 (Leakage Test)	-
5.3.2 (Drop Test)	-
5.3.3 (Compressive Deformation Resistance)	-
5.2 (Mechanical Requirements)	-
Cl.4.1 (Carbon - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.1 (Silicon - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.1 (Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.1 (Nickel - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.1 (Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.1 (Sulphur - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.1 (Phosphorous - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.1 (Nitrogen - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.1 (Molybdenum - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.1 (Copper - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.1 (Other Elements - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.5.3.4 (Permanency of Pigments - Annex D of IS 18800)	-

-
For raw material testing please see status for relevant IS.

IS 3521 : Part 5 (2021)

Personal Fall Arrest Systems Specification Part 5 Connectors with self-closing and self-locking gates

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause No. 4.1 (General requirement)	-
Clause No. 4.2.1 (" Gate-face resistance ")	-
Clause No. 4.2.2 (" Gate side-load resistance ")	-
Clause No. 4.3 ("Static strength ")	-
Clause No. 4.4 (" Corrosion resistance ")	-
Clause No. 6.2 (Marking)	-

-
Facility not available for Gate-resistance tests, Static strength test, Corrosion test

IS 444 (2017)

Rubber hoses, textile - Reinforced, for general - Purpose water applications - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Classification - IS 444)	-
5 (Lining - IS 444)	-
5 (Reinforcement - IS 444)	-
5 (Cover - IS 444)	-
5 (Lining and Cover - IS 444)	-
6.1- Table 1 (Internal diameters - ISO 4671)	-
6.2 (Concentricity - ISO 4671)	-
6.3 (Length -IS 4671)	-
6.4 ( thickness of the lining plus cover - ISO 4671)	-
6.4 (If the cover is fluted, the depth of the flutes - ISO 4671)	-
7.1 - Table 2 ( tensile strength of Lining - ISO 37 )	-
7.1 - Table 2 ( tensile strength of Cover - ISO 37 )	-
7.1 - Table 2 (elongation at break of Cover - ISO 37)	-
7.1 - Table 2 (Change in tensile strength of Lining from original value after ageing(max) - ISO 188 and ISO 37)	-
7.1 - Table 2 (Change in elongation at break of Lining from original value after ageing (max.) - ISO 188 and ISO 37)	-
7.1 - Table 2 (Change in elongation at break of Cover from original value after ageing (max.) - ISO 188 and ISO 37)	-
7.2 - Table 3 (Proof pressure at 23 °C - ISO 1402)	-
7.2 - Table 3 (Change in length at proof pressure - ISO 1402)	-
7.2 - Table 3 (Minimum burst pressure - ISO 1402)	-
7.2 - Table 3 (Adhesion between components - ISO 8033)	-
7.2 - Table 3 (Ozone resistance - ISO 7326)	-
7.2 - Table 3 (Flexibility at 23 °C - Method A of ISO 1746)	-
7.2 - Table 3 (Low-temperature flexibility - Method B of ISO 4672)	-

-
except physical test,performance and pressure requirements; except Proof pressure ,Change in length, Min Burst pr , Adhesion between components, Ozone resistance , Flexibility at 23 °C, Flexibility at low temp cl 13 RADIOGRAPHIC EXAMINATION ;

IS 1783 : Part 2 (2014)

Drums large, fixed ends - Specification: Part 2 grade B drums (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Capacity)	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
6 (Material)	-
7 (Construction)	-
7.1 (Construction)	-
7.2 (Construction)	-
7.3 (Construction)	-
7.4 (Construction)	-
7.5 (Construction)	-
7.7 (Construction)	-
8 (Finish )	-
9.1 (Leakage at air pressure )	-
9.2 (Drop Test)	-
9.3 (Hydraulic Pressure Test)	-
5 (Dimensions (Type 2 C Drums Figure 2))	-
5 (Dimensions (Type 2 C Drums Figure 2))	-
5 (Dimensions (Type 2 C Drums Figure 2))	-
5 (Dimensions (Type 2 C Drums Figure 2))	-
5 (Dimensions (Type 2 C Drums Figure 2))	-
5 (Dimensions (Type 2 C Drums Figure 2))	-
5 (Dimensions (Type 2 C Drums Figure 2))	-
5 (Dimensions (Type 2 C Drums Figure 2))	-
5 (Dimensions (Type 2 C Drums Figure 2))	-
5 (Dimensions (Type 2 C Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
6 (Material)	-
5 (Dimensions (Type 1 C Drums Figure 1))	-

-
Mech: 9.2 Drop Test,9.3 Hydraulic Pressure Test

IS 16984 (2018)

Folding box board for general consumer product packaging - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
Partial; Chem(except OBA (optical brightening agent), Anthraquinone, Dioxins and Furans,Pentachlorophenol (PCP), Polychlorinated biphenyls) Mech(except Cl 5.9 table 1 bulk, Cobb, Brightness, Gloss, IGT Dry Pick, Roughness. Cl 5.7 Stiffness

IS 15030 (2022)

TEREPHTHALIC ACID - SPECIFICATION (First revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2-Table 1-(i) (Moisture content)	-
3.2-Table 1-(ii) (Colour, Pt-Co)	-
3.2-Table 1-(iii) (Ash content)	-
3.2-Table 1-(iv) (Acid value)	-
3.2-Table 1-(v) (Total of iron, cobalt, manganese, chromium and titanium)	-
3.2-Table 1-(vii) (4-carboxybenzaldehyde)	-
3.2-Table 1-(vi) (Total of sodium, magnesium, potassium, calcium and nickel)	-
3.2-Table 1-(viii) (4-carboxybenzaldehyde + p-toluic acid)	-

-
COMPLETE

IS 10116 (2015)

Boric acid - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2, 4.3, 4.4, Table 1 (Boric acid (as H3BO3 ))	-
4.2, 4.3, 4.4, Table 1 (Moisture)	-
4.2, 4.3, 4.4, Table 1 (Water insoluble matter)	-
4.2, 4.3, 4.4, Table 1 (Heavy metals (as Pb))	-
4.2, 4.3, 4.4, Table 1 (Iron (as Fe))	-
4.2, 4.3, 4.4, Table 1 (Ca)	-
4.2, 4.3, 4.4, Table 1 (As)	-
4.2, 4.3, 4.4, Table 1 (Na)	-
4.2, 4.3, 4.4, Table 1 (Cl)	-
4.2, 4.3, 4.4, Table 1 (Sulphate (as SO4 ))	-
4.2, 4.3, 4.4, Table 1 (Phosphate (PO4 ))	-
4.2 ( Description)	-

-
COMPLETE

IS 12146 (1987)

Specification for carbon manganese steel forgings for pressure vessels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1, Table 3 (Yield Strength, Mpa)	-
6.1, Table 3 (Tensile Strength, Mpa)	-
6.1, Table 3 (Elongation, %)	-

-
Except Impact, Metallographic, Ultrasonic, Chem- Complete

IS 5405 (2019)

Sanitary napkins – Specification (second revision)

For all sizes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7.1 (pH Value, IS 1390 (cold method) for all sizes)	-
Cl 7.2 (Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-
Cl 7.3.1 (Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-
Cl7.3.2 (Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-
Cl 5 (SIZES, Regular )	-
Cl 5 (SIZES, Large)	-
Cl 5 (SIZES, Extra Large)	-
Cl 5 (SIZES, XXL)	-

-
Partial

IS 863 (2023)

Medical Textiles - Cotton bandage cloth - Specification third revision of IS 863

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2, Table 1, ii) (Threads, dm, Min)	-
4.2, Table 1, iii) (Mass, g/m2)	-
4.2, Table 1, iv) (Length, m, tolerance)	-
4.2, Table 1, v) (Width, m, tolerance)	-
4.2, Table 1, ix) (Colour fastness: b) Washing (A1))	-

-
Mech: All tests except 3.1 Yarn, 4.1 Fiber identification, Table 2 (Color fastness to light and sterility (optional))

IS 13095 (2020)

Butterfly Valves for General Purposes ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (VALVE END CONNECTIONS)	-
6.0 ( NOMINAL SIZES )	-
7.2 (Class designations)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Flange-D)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-D)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Pipe O.D.- d1)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange -D)	-
9.1.1 ( Double Flanged Body Ends)	-
9.2.2 (Wafer Body Ends)	-
10.1 -Table1 (FACE TO FACE DIMENSIONS)	-

-
Mech: Test facility not available for 13. Seating and Linings, 14. Bearings, 16. Operations and 17. Testing

IS 758 (2023)

MEDICAL TEXTILES ï¿½ COTTON ABSORBENT GAUZE ï¿½ SPECIFICATION ( Fifth Revision of IS 758 )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.2, Table 1 (vii) (pH value of aqueous extract)	-
Cl-4.2, Table 1 (vi) (Absorbency)	-
Cl-4.2, Table 1 (viii) (Scouring loss, percent)	-
Cl-4.2, Table 1 (ix) (Freedom from optical whitener)	-
Cl-3.2 ("Cloth- shall be free from weaving defects, sizing, dressing and filling materials, and substances liable to cause subsequent tendering.Shall be reasonably free from holes, slubs, snarls and naps")	-
Cl-3.2 a ("Cloth- The fabric shall be reasonably free from Odour")	-
Cl-3.2 b ("Cloth- The fabric shall be reasonably free from Defective Selvedge")	-
Cl-3.2 c ("Cloth- The fabric shall be reasonably free from Cracks")	-
Cl-3.2 d ("Cloth- The fabric shall be reasonably free from Double ends")	-
Cl-3.2 e ("Cloth- The fabric shall be reasonably free from Sloughing")	-
Cl-4.2, Table 1 (i) ("Count of yarn (for guidance only) (a)-Warp")	-
Cl-4.2, Table 1 (i) ("Count of yarn (for guidance only) (b)-Weft")	-
Cl-4.2, Table 1 (ii) (Threads/dm)	-
Cl-4.2, Table 1 (iii) (Mass, g/m2)	-
Cl-4.2, Table 1 (iv) (Length, m)	-
Cl-4.2, Table 1 (v) (Width, cm)	-
4.3 (Non-sterile product)	-
Medical Textiles — Absorbent Cotton Gauze — Specification (Fifth Revision) (Sterile product)	-
Cl.4.2 - Table No 1 - Sl. No.-vii (pH value of aqueous extract - IS 1390)	-
Cl.4.2 - Table No 1 - Sl. No.-viii (Scouring loss - IS 1383 (mild method))	-
Cl.4.2 - Table No 1 - Sl. No.-ix ("Freedom from optical whitener - viewing under ultra-violet light")	-
Cl.4.2 - Table No 1 - Sl. No.-vi (Absorbency- IS 2369)	-

-
Except Absorbency, pH, Scouring loss, Freedom from Optical whitener

IS 7466 (1994)

Rubber gaskets for pressure cookers - Specifications (First Revison)

Rs.9480/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Workmanship and Finish )	-
3.4-Table 1(i) (Requirements of Rubber Used for Gaskets-Hardness IRHD)	-
3.4-Table 1(ii) (Requirements of Rubber Used for Gaskets-Tensile strength,)	-
3.4-Table 1(iii) (Requirements of Rubber Used for Gaskets-Elongation at break)	-
3.4-Table 1(iv-a) (Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing 3 days in Aie-oven Change From Original Value))	-
3.4-Table 1(iv-b) (Requirements of Rubber Used for Gaskets-Tensile strength(After ageing 3 days in Aie-oven Change From Original Value))	-
3.4-Table 1(iv-c) (Requirements of Rubber Used for Gaskets-Elongation at break(After ageing 3 days in Aie-oven Change From Original Value))	-
3.4-Table 1(v-a) (Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing in an autoclave Change From Original Value))	-
3.4-Table 1(v-b) (Requirements of Rubber Used for Gaskets-Tensile strength(After ageing in an autoclave Change From Original Value))	-
3.4-Table 1(v-c) (Requirements of Rubber Used for Gaskets-Elongation at break(After ageing in an autoclave Change From Original Value))	-
3.4-Table 1(vi) (Compression set)	-
3.5-ANNEX C (PERFORMANCE TEST FOR PRESSURE COOKER )	-
Clause 4.3 Table 1 (Zinc oxide)	-
Clause 3.4 Table 1 (Heavy metal content)	-

-
Chem- C (Total ZnO & Heavy metals only) SL NO. 1 xii) N-Nitrosamines xiii) N-Nitrosatables Mech: Hydrostatic test

IS 16581 (2018)

High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packing of solid ammonium nitrate for explosives - Specification

For all type

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 Table 1 (i) (Dimensions, mm a) Length)	-
5.1 Table 1 (i) (Dimensions, mm b) Width)	-
5.1 Table 1 (iii) (Picks per dm)	-
5.1 Table 1 (iv) (Mass of fabric, g/m2)	-
5.1 Table 1 (v) (Average breaking strength of fabric, Min [Raveled strip method, 200 mm × 50 mm1), N²) (kgf)]:)	-
5.1 Table 1 (vi) (Minimum breaking strength of bottom seam (Strip method), N²) (kgf), Min)	-
5.1 Table 1 (vii) (Elongation at break of fabric (Raveled strip method), percent :)	-
5.1 Table 1 (v) (Average breaking strength of fabric, Min [Raveled strip method, 200 mm × 50 mm1), N²) (kgf)]: a) Length-wise b) Width-wise)	-
5.1 Table 1 (ii) (Ends per dm)	-
5.1 Table 1 (iii) (Picks per dm)	-
5.1 Table 1 (iv) (Mass of fabric, g/m2)	-
5.1 Table 1 (vi) (Minimum breaking strength of bottom seam (Strip method), N²) (kgf), Min)	-
5.1 Table 1 (vii) (Elongation at break of fabric (Raveled strip method), percent :)	-
6 (PRINTING, PACKING AND MARKING)	-
6 (PRINTING, PACKING AND MARKING)	-

-
Complete

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

All (see remarks)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause - 7.1 (CARBON)	-
Clause - 7.1 (SULPHUR)	-
Clause - 7.1 (PHOSPHURS)	-
Clause - 7.1 (MANGANESE)	-
Clause - 7.1 (NITROGEN)	-
Clause.7.1 (Silicon)	-
Clause.7.1 (Carbon Equbalant)	-
Clause. 13 (Macro examination test.)	-
Clause. 13 (Sulphur print.)	-
Clause. 13 (Inclusion content)	-

-
Chem- except Nb, V, Al. Mech- Sample should be in the form of a block (atleast 5cm x 5 cm x 5 cm)for S Imprinting & Inclusion Content test.

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

For all nominal Dia

Total Testing Charges : Rs. 9970.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
12.3 (Vicat softening tempewrature)	-
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-
Cl.15, Annex B (Sulphated Ash Content)	-
Cl.14, Annex A (Titanium Di-Oxide Content)	-
19 (Marking)	-
4 (Size Designation)	-
5 (Colour of fittings)	-
7.1,Table 1 (Wall thickness)	-
7.2 ,Table 2&3 (Socket Dimensions)	-
7.3 (Dimensions of waste trap(Nahani Trap)	-
8 (Sealing Rings)	-
10 (Workmanship)	-
11.4,Table 5 (Vent cowl)	-
11.5,Table 6 (Pipe Clips)	-
12.1 (Visual appearance)	-
12.2 (Stress relief test)	-
12.3 (Vicat softening tempewrature)	-
16.1 (Impact test)	-
7.4 (Chamfer)	-
12.4 (Effect on water test)	-
Cl 12.4 (Effect on Water Lead (first extraction))	-
Cl 12.4 (Effect on Water Lead (third extraction))	-
Cl 12.4 (Effect on Water Dialkyl tin C4 and higher homologues(measured as tin )(third extraction ))	-
Cl 12.4 (Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-
Cl 12.4 (Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-

-
Except Water Tightness of joints. Chemical: All except Effect on Water which is for Pipes above 60 mm Nominal dia and except for the requirement of 'Other Toxic Substances such a di-n-octyl Tin -s-s bis iso-octyl mercapto acetate' and 'butyl stearate'; Mech- All except HST.

IS 5082 (1998)

Wrought aluminium and aluminium alloy bars, rods, tubes, sections, plates and sheets for electrical applications (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1, Table 1 (Copper)	-
6.1, Table 1 (Magnesium)	-
6.1, Table 1 (Silicon)	-
6.1, Table 1 (Manganese)	-
6.1, Table 1 (Zinc)	-
6.1, Table 1 (Titanium)	-
6.1, Table 1 (Chromium)	-
6.1, Table 1 (Iron)	-
Clause 5 (FREEDOM FROM DEFECTS)	-
8.1 (MECHANICAL TEST Tensile Strength Min, Mpa)	-
8.1 (MECHANICAL TEST (0.2 Percent Proof Stress Min, Mpa))	-
8.1 (Percent Elongation on 5.65 Min)	-
8.2 (Bend Test)	-
8.1 (Maximum Electrical Resistivity at 20°C ohm-mm/mm2)	-

-
Chemical : Except Al, V and others elements

IS 15844 : Part 2 (2023)

SPORTS FOOTWEAR PART -2 PERFORMANCE SPORTS FOOTWEAR

For all

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (DESIGN)	-
7.1.1 (Whole Footwear)	-
7.1.2 (Upper to Mid Sole/Out Sole Bond Performance)	-
7.1.3 ("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-
7.1.4 (Out Sole to Mid Sole (Multilayer) Bond Performance)	-
7.1.5 (Energy Absorption at Seat Region)	-
7.12, Table no. 1 of IS 17011,(i) (Allergenic and carcinogenic disperse dyes)	-
7.12, Table no. 1 of IS 17011,(ii) (Aromatic amines released from Azo dyes (each individual amine))	-
7.12, Table no. 1 of IS 17011,(iv) (Chromium (VI))	-
7.12, Table no. 1 of IS 17011,(v) (Dimethyl fumarate (DMFU))	-
7.12, Table no. 1 of IS 17011,(vi) (Formaldehyde (free or released by partial hydrolysis))	-
7.12, Table no. 1 of IS 17011,(viii) (Organotin compounds)	-
7.12, Table no. 1 of IS 17011,(x) (pH)	-
7.12, Table no. 1 of IS 17011,(xi) (Phthalates (each individual phthalate))	-
7.12, Table no. 1 of IS 17011,(xii) (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-
Cl.1.4.1 of IS 17011 (Table B Sl I ) (Phthalate: DINP)	-
Cl.1.4.1 of IS 17011 (Table B Sl II ) (Phthalate:: DNOP)	-
Cl.1.4.1 of IS 17011 (Table B Sl III ) (Phthalate: DEHP)	-
Cl.1.4.1 of IS 17011 (Table B Sl IV ) (Phthalate: DIDP)	-
Cl.1.4.1 of IS 17011 (Table B Sl V) (Phthalate: BBP)	-
Cl.1.4.1 of IS 17011 (Table B Sl VI ) (Phthalate:DBP)	-
Cl.1.4.1 of IS 17011 (Table B Sl VII ) (Phthalate: DIBP)	-
Cl.4.1 (Annex-A Sl I ) (Organotin: Dibutyltin)	-
Cl.4.1 (Annex-A Sl II ) (Organotin: Dibutyltin Dichloride)	-
Cl.4.1 (Annex-A Sl III ) (Organotin: Dioctyltin)	-
Cl.4.1 (Annex-A Sl IV) (Organotin: Monobutyltin)	-
Cl.4.1 (Annex-A Sl V ) (Organotin: Tributyltin)	-
Cl.4.1 (Annex-A Sl VI) (Organotin: Triphenyltin)	-
Cl.4.1 (Annex-A Sl VII ) (Organotin: Monoctyltin)	-
Cl.4.1 (Annex-A Sl VIII) (Organotin: Bis (tributyltin) oxide)	-
Cl.4.1 (Table B-1 Sl I) (Aromatic Amines: 4-aminobiphenyl)	-
Cl.4.1 (Table B-1 Sl II) (Aromatic Amines: Benzidine)	-
Cl.4.1 (Table B-1 Sl III) (Aromatic Amines: 4-chloro-o-toluidine)	-
Cl.4.1 (Table B-1 Sl IV) (Aromatic Amines: 2-naphthylamine)	-
Cl.4.1 (Table B-1 Sl V) (Aromatic Amines :o-aminoazotoluene)	-
Cl.4.1 (Table B-1 Sl VI) (Aromatic Amines: 2-amino-4-nitrotoluenem)	-
Cl.4.1 (Table B-1 Sl VII) (Aromatic Amines: p-chloroaniline)	-
Cl.4.1 (Table B-1 Sl VIII) (Aromatic Amines: 2,4-diaminoanisole)	-
Cl.4.1 (Table B-1 Sl IX) (Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-
Cl.4.1 (Table B-1 Sl X) (Aromatic Amines : 3,3’-dichlorobenzidine)	-
Cl.4.1 (Table B-1 Sl XI) (Aromatic Amines : 3,3’-dimethoxybenzidine)	-
Cl.4.1 (Table B-1 Sl XII) (Aromatic Amines : 3,3’-dimethylbenzidine)	-
Cl.4.1 (Table B-1 Sl XIII) (Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-
Cl.4.1 (Table B-1 Sl XIV) (Aromatic Amines : p-cresi)	-
Cl.4.1 (Table B-1 Sl XV) (Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-
Cl.4.1 (Table B-1 Sl XVI) (Aromatic Amines :4,4’-oxydianiline)	-
Cl.4.1 (Table B-1 Sl XVII) (Aromatic Amines:4,4’-thiodianiline)	-
Cl.4.1 (Table B-1 Sl XVIII) (Aromatic Amines :o-toluidine:)	-
Cl.4.1 (Table B-1 Sl XIX) (Aromatic Amines: 2,4-toluylendiamine)	-
Cl.4.1 (Table B-1 Sl XX) (Aromatic Amines: 2,4,5-trimethylaniline)	-
Cl.4.1 (Table B-1 Sl XXI) (Aromatic Amines :2,4-dimethylaniline)	-
Cl.4.1 (Table B-1 Sl XXII) (Aromatic Amines: 2,6-dimethylaniline:)	-
Cl.4.1 (Table B-1 Sl XXIII) (Aromatic Amines :2-methoxyaniline)	-
Cl.4.1 (Table B-1 Sl XXIV) (Aromatic Amines :4-aminoazobenzene)	-
Cl.4.1 (Table B-3 Sl I) (Allergenic Disperse Dyes :Disperse blue 3)	-
Cl.4.1 (Table B-3 Sl II) (Allergenic Disperse Dyes :Disperse blue 7)	-
Cl.4.1 (Table B-3 Sl III) (Allergenic Disperse Dyes :Disperse blue 26)	-
Cl.4.1 (Table B-3 Sl IV) (Allergenic Disperse Dyes :Disperse blue 102)	-
Cl.4.1 (Table B-3 Sl V) (Allergenic Disperse Dyes: Disperse brown 1)	-
Cl.4.1 (Table B-3 Sl VI) (Allergenic Disperse Dyes :Disperse yellow 1)	-
Cl.4.1 (Table B-3 Sl VII) (Allergenic Disperse Dyes :Disperse yellow 9)	-
Cl.4.1 (Table B-3 Sl VIII) (Allergenic Disperse Dyes :Disperse yellow 39)	-
Cl.4.1 (Table B-3 Sl IX) (Allergenic Disperse Dyes :Disperse yellow 49)	-
Cl.4.1 (Table B-3 Sl X) (Allergenic Disperse Dyes :Disperse orange 1)	-
Cl.4.1 (Table B-3 Sl XI) (Allergenic Disperse Dyes :Disperse red 11)	-
Cl.4.1 (Table B-3 Sl XII) (Allergenic Disperse Dyes :Disperse red 17)	-
Cl.4.1 (Table B-3 Sl XIII) (Allergenic Disperse Dyes :Disperse yellow 7)	-
Cl.4.1 (Table B-3 Sl XIV) (Allergenic Disperse Dyes :Disperse yellow 56)	-
Cl.4.1 (Table B-3 Sl XV) (Allergenic Disperse Dyes :Disperse red 151)	-
Cl.4.1 (Table B-3 Sl XVI) (Allergenic Disperse Dyes :Solvent red 23)	-
Cl.4.1 (Table B-4 Sl I) (Carcinogenic Disperse Dyes :Navy blue)	-
Cl.4.1 (Table B-4 Sl II) (Carcinogenic Disperse Dyes: Disperse blue 1)	-
Cl.4.1 (Table B-4 Sl III) (Carcinogenic Disperse Dyes: Disperse blue 35)	-
Cl.4.1 (Table B-4 Sl IV) (Carcinogenic Disperse Dyes :Disperse blue 106)	-
Cl.4.1 (Table B-4 Sl V) (Carcinogenic Disperse Dyes: Disperse blue 124)	-
Cl.4.1 (Table B-4 Sl VI) (Carcinogenic Disperse Dyes :Disperse yellow 3)	-
Cl.4.1 (Table B-4 Sl VII) (Carcinogenic Disperse Dyes: Disperse orange 3)	-
Cl.4.1 (Table B-4 Sl VIII) (Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-
Cl.4.1 (Table B-4 Sl IX) (Carcinogenic Disperse Dyes :Disperse red 1)	-
Cl.4.1 (Table B-4 Sl X) (Carcinogenic Disperse Dyes :Basic red 9)	-
Cl.4.1 (Table B-4 Sl XI) (Carcinogenic Disperse Dyes :Violet 3)	-
Cl.4.1 (Table B-4 Sl XII) (Carcinogenic Disperse Dyes Disperse yellow 23)	-
Cl.4.1 (Table B-3) (Allergenic and Carcinogenic Disperse Dyes)	-
Cl.4.1 (Table B-11) (PCP-TeCP-TriCP polychlorophenols)	-

-
Except Flexing resistance table 2, Colour fastness rubbing table 2, Slip Resistance (Cl 7.1.8), Washability (Cl 7.1.7), Colour fastness to light table 2, Flexing resistance table 3, Colour fastness to light table 3, Flexing index(Only applicable for cellulose board) as per Table 5, Counter stiffener as per Table 9, Peel strength & Shear strength as per Table 10, Colour fastness to water of table 12, Strength at Needle Perforation table 3, Needle Strength of Elastic Tape table 11 Chem- Complete, Material declaration required for Innocuousness test.

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

For all type

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5, Table -1 S. No-(i) (Amendment No-1) (Insole)	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1) (Toe spring height)	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1) ("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1) (Energy absorption at seat region)	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1) ("Abrasion resistance a-Cellular sole b-Solid sole")	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1) (Hydrolysis resistance)	-
Cl No . 4.14, Table no. 1 of IS 17011(i) (Allergenic and carcinogenic disperse dyes)	-
Cl No . 4.14, Table no. 1 of IS 17011(ii) (Aromatic amines released from Azo dyes (each individual amine))	-
Cl No . 4.14, Table no. 1 of IS 17011(iv) (Chromium (VI))	-
Cl No . 4.14, Table no. 1 of IS 17011(v) (Dimethyl fumarate (DMFU))	-
Cl No . 4.14, Table no. 1 of IS 17011(vi) (Formaldehyde (free or released by partial hydrolysis))	-
Cl No . 4.14, Table no. 1 of IS 17011(viii) (Organotin compounds)	-
Cl No . 4.14, Table no. 1 of IS 17011(x) (pH)	-
Cl No . 4.14, Table no. 1 of IS 17011(xi) (Phthalates (each individual phthalate))	-
Cl No . 4.14, Table no. 1 of IS 17011(xii) (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-
Cl.1.4.1 of IS 17011 (Table B Sl I ) (Phthalate: DINP)	-
Cl.1.4.1 of IS 17011 (Table B Sl II ) (Phthalate:: DNOP)	-
Cl.1.4.1 of IS 17011 (Table B Sl III ) (Phthalate: DEHP)	-
Cl.1.4.1 of IS 17011 (Table B Sl IV ) (Phthalate: DIDP)	-
Cl.1.4.1 of IS 17011 (Table B Sl V) (Phthalate: BBP)	-
Cl.1.4.1 of IS 17011 (Table B Sl VI ) (Phthalate:DBP)	-
Cl.1.4.1 of IS 17011 (Table B Sl VII ) (Phthalate: DIBP)	-
Cl.4.1 (Annex-A Sl I ) (Organotin: Dibutyltin)	-
Cl.4.1 (Annex-A Sl II ) (Organotin: Dibutyltin Dichloride)	-
Cl.4.1 (Annex-A Sl III ) (Organotin: Dioctyltin)	-
Cl.4.1 (Annex-A Sl IV) (Organotin: Monobutyltin)	-
Cl.4.1 (Annex-A Sl V ) (Organotin: Tributyltin)	-
Cl.4.1 (Annex-A Sl VI) (Organotin: Triphenyltin)	-
Cl.4.1 (Annex-A Sl VII ) (Organotin: Monoctyltin)	-
Cl.4.1 (Annex-A Sl VIII) (Organotin: Bis (tributyltin) oxide)	-
Cl.4.1 (Table B-1 Sl I) (Aromatic Amines: 4-aminobiphenyl)	-
Cl.4.1 (Table B-1 Sl II) (Aromatic Amines: Benzidine)	-
Cl.4.1 (Table B-1 Sl III) (Aromatic Amines: 4-chloro-o-toluidine)	-
Cl.4.1 (Table B-1 Sl IV) (Aromatic Amines: 2-naphthylamine)	-
Cl.4.1 (Table B-1 Sl V) (Aromatic Amines :o-aminoazotoluene)	-
Cl.4.1 (Table B-1 Sl VI) (Aromatic Amines: 2-amino-4-nitrotoluenem)	-
Cl.4.1 (Table B-1 Sl VII) (Aromatic Amines: p-chloroaniline)	-
Cl.4.1 (Table B-1 Sl VIII) (Aromatic Amines: 2,4-diaminoanisole)	-
Cl.4.1 (Table B-1 Sl IX) (Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-
Cl.4.1 (Table B-1 Sl X) (Aromatic Amines : 3,3’-dichlorobenzidine)	-
Cl.4.1 (Table B-1 Sl XI) (Aromatic Amines : 3,3’-dimethoxybenzidine)	-
Cl.4.1 (Table B-1 Sl XII) (Aromatic Amines : 3,3’-dimethylbenzidine)	-
Cl.4.1 (Table B-1 Sl XIII) (Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-
Cl.4.1 (Table B-1 Sl XIV) (Aromatic Amines : p-cresi)	-
Cl.4.1 (Table B-1 Sl XV) (Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-
Cl.4.1 (Table B-1 Sl XVI) (Aromatic Amines :4,4’-oxydianiline)	-
Cl.4.1 (Table B-1 Sl XVII) (Aromatic Amines:4,4’-thiodianiline)	-
Cl.4.1 (Table B-1 Sl XVIII) (Aromatic Amines :o-toluidine:)	-
Cl.4.1 (Table B-1 Sl XIX) (Aromatic Amines: 2,4-toluylendiamine)	-
Cl.4.1 (Table B-1 Sl XX) (Aromatic Amines: 2,4,5-trimethylaniline)	-
Cl.4.1 (Table B-1 Sl XXI) (Aromatic Amines :2,4-dimethylaniline)	-
Cl.4.1 (Table B-1 Sl XXII) (Aromatic Amines: 2,6-dimethylaniline:)	-
Cl.4.1 (Table B-1 Sl XXIII) (Aromatic Amines :2-methoxyaniline)	-
Cl.4.1 (Table B-1 Sl XXIV) (Aromatic Amines :4-aminoazobenzene)	-
Cl.4.1 (Table B-3 Sl I) (Allergenic Disperse Dyes :Disperse blue 3)	-
Cl.4.1 (Table B-3 Sl II) (Allergenic Disperse Dyes :Disperse blue 7)	-
Cl.4.1 (Table B-3 Sl III) (Allergenic Disperse Dyes :Disperse blue 26)	-
Cl.4.1 (Table B-3 Sl IV) (Allergenic Disperse Dyes :Disperse blue 102)	-
Cl.4.1 (Table B-3 Sl V) (Allergenic Disperse Dyes: Disperse brown 1)	-
Cl.4.1 (Table B-3 Sl VI) (Allergenic Disperse Dyes :Disperse yellow 1)	-
Cl.4.1 (Table B-3 Sl VII) (Allergenic Disperse Dyes :Disperse yellow 9)	-
Cl.4.1 (Table B-3 Sl VIII) (Allergenic Disperse Dyes :Disperse yellow 39)	-
Cl.4.1 (Table B-3 Sl IX) (Allergenic Disperse Dyes :Disperse yellow 49)	-
Cl.4.1 (Table B-3 Sl X) (Allergenic Disperse Dyes :Disperse orange 1)	-
Cl.4.1 (Table B-3 Sl XI) (Allergenic Disperse Dyes :Disperse red 11)	-
Cl.4.1 (Table B-3 Sl XII) (Allergenic Disperse Dyes :Disperse red 17)	-
Cl.4.1 (Table B-3 Sl XIII) (Allergenic Disperse Dyes :Disperse yellow 7)	-
Cl.4.1 (Table B-3 Sl XIV) (Allergenic Disperse Dyes :Disperse yellow 56)	-
Cl.4.1 (Table B-3 Sl XV) (Allergenic Disperse Dyes :Disperse red 151)	-
Cl.4.1 (Table B-3 Sl XVI) (Allergenic Disperse Dyes :Solvent red 23)	-
Cl.4.1 (Table B-4 Sl I) (Carcinogenic Disperse Dyes :Navy blue)	-
Cl.4.1 (Table B-4 Sl II) (Carcinogenic Disperse Dyes: Disperse blue 1)	-
Cl.4.1 (Table B-4 Sl IV) (Carcinogenic Disperse Dyes :Disperse blue 106)	-
Cl.4.1 (Table B-4 Sl V) (Carcinogenic Disperse Dyes: Disperse blue 124)	-
Cl.4.1 (Table B-4 Sl VI) (Carcinogenic Disperse Dyes :Disperse yellow 3)	-
Cl.4.1 (Table B-4 Sl VII) (Carcinogenic Disperse Dyes: Disperse orange 3)	-
Cl.4.1 (Table B-4 Sl VIII) (Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-
Cl.4.1 (Table B-4 Sl IX) (Carcinogenic Disperse Dyes :Disperse red 1)	-
Cl.4.1 (Table B-4 Sl X) (Carcinogenic Disperse Dyes :Basic red 9)	-
Cl.4.1 (Table B-4 Sl XI) (Carcinogenic Disperse Dyes :Violet 3)	-
Cl.4.1 (Table B-4 Sl XII) (Carcinogenic Disperse Dyes Disperse yellow 23)	-
Cl-5, Table -1 S. No- (v) (Amendment No-1) (Complete shoe flexing)	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1) (Washability)	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1) (Slip resistance, coefficient of friction (COF),)	-
Cl.4.1 (Table B-11) (PCP-TeCP-TriCP polychlorophenols)	-
Cl.4.1 (Table B-3) (Allergenic and Carcinogenic Disperse Dyes)	-

-
Except Slip resistance(4.3.9), Washability (4.3.8), Flexing Resistance(Table 1), Colour fastness to Rubbing(Table 1), Colour fastness to light(Table 1), Flexing resistance-Wet & Dry, Bursting strength, Flexing Index, Counter Stiffner, Colour Fastness to Water, Colour fastness to rubbing (Crocking) Mech-Quantity:- 3 Pairs + Raw material for Additional requirements + Type to be declared + Slab for Hydrolysis resistance test (200 X 200 mm of thickness 3.0 +/- 0.2 mm) + For maltilayer outsole separate slab of outerlayer of outsole to be provided for Abrasion Resistance test Chem-Complete, Material declaration required for Innocuousness test.

IS 10805 (2022)

Foot-Valves, Reflux Valves or NonReturn Valves and Bore Valves to be Used in Suction Lines of Agricultural Pumping Systems â Specification ( Second Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Dimensions)	-
5.3 (Flange Dimensions)	-

-
Mechanical: Test facility not available for Seat Test, Housing Test, K-value test, frictional loss. Declaration required for nominal size of pipe and valve.

IS 17753 (2021)

Paperbased Multilayer Laminated/Extruded Composite Cartons (Aseptic and Non-Aseptic) for Processed Liquid Food Products and Beverages Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2.1 (Over-all Migration)	-
5.2.2 (Specific Migration Test)	-
5.1.1 (Description)	-
5.2.7 (Ink Adhesion Test)	-
5.2.6 (Print Resistance Test)	-
4.3 (Capacity)	-
4.1 Table 1 (i) (Grammage of paperboard, g/m2 , Max)	-
4.1 Table 1 (ii) (Thickness of aluminium foil, microns, Max)	-
4.1 Table 1 (iii) (Thickness of polyethylene, microns, Max)	-
5.2.3 (Vibration Leakage Test)	-
Cl..5.2.1 (Overall migration, mg/dm2, Max- IS 9845:1988)	-
Cl..5.2.1 (Colour migration- IS 9845:1988)	-
Cl..5.2.2- Tabl 2- S.No-viii ("Specific migration, Phthalic acid, (2-ethylhexyl) ester (DEHP), mg/kg, Max- IS 9873(Part 6):2021")	-
Cl..5.2.2- Tabl 2- S.No-viii (Specific migration, Antimony, mg/kg, Max- IS 3025 (Part 65) : 2025)	-
Cl..5.2.2- Tabl 2- S.No-vii (Specific migration, Zinc, mg/kg, Max- IS 3025 (Part 65) : 2025)	-
Cl..5.2.2- Tabl 2- S.No-vi (Specific migration, Manganese, mg/kg, Max- IS 3025 (Part 65) : 2025)	-
Cl..5.2.2- Tabl 2- S.No-v (Specific migration, Lithium, mg/kg, Max- IS 3025 (Part 65) : 2025)	-
Cl..5.2.2- Tabl 2- S.No-iv (Specific migration, Iron, mg/kg, Max- IS 3025 (Part 65) : 2025)	-
Cl..5.2.2- Tabl 2- S.No-iii (Specific migration, Copper, mg/kg, Max- IS 3025 (Part 65) : 2025)	-
Cl..5.2.2- Tabl 2- S.No-ii (Specific migration, Cobalt, mg/kg, Max- IS 3025 (Part 65) : 2025)	-
Cl..5.2.2- Tabl 2- S.No-i (Specific migration, Barium, mg/kg, Max- IS 3025 (Part 65) : 2025)	-
5.2.4.2 (Shelf-life test)	-
5.2.4.3 (Total bacterial count, CFU/g, max)	-
5.2.4.3 (Total spore count,CFU/g, max)	-
5.2.4.3 (Yeast and mould, CFU/100cm2, max)	-
5.2.4.4 (Visual observation)	-
5.2.4.5 (a) (" The sheet/carton meets the requirements for microbiological parameters at the end of declared shelf-life or at the end of accelerated condition period ")	-
5.2.4.5 (b) (There is no delamination and no deformation into the sheet/carton at the end of declared shelf-life or atthe end of accelerated condition period.)	-

-
Excluding Cl 4.1-4.1.4 (material & Construction), cl 5.2.5 [Water Vapour Transmission Rate (WVTR) and Oxygen Transmission Rate (OTR)]

IS 6719 (1972)

Solid Pvc Soles And Heels

For all

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.6.1 (Hardness )	-
3.6 (i) (Relative density )	-
3.6 (v) (Volatility, percent by means )	-
Table 1 (Flexing resistance) (Table 1 (Flexing resistance, Bennewart method, cut growth at the end of 30 000 cycles, mm, Max))	-
Table 1 (Abrasion resistance) (Abrasion resistance at applied force of 10 N (volume loss), mm3, Max)	-
Cl. 6.4 (Measurement of thickness)	-
3.6 (iv) (Tear Strength a) Force Part b) Back Part )	-
Cl. 3.1,3.2,3.3,3.4,3.5 (Material)	-
3.6 (iii) (Elongation at break, percent )	-
3.6 (ii) (Tensile Strength )	-
6 ,6.1,6.2,6.3 (Test Method)	-
Cl. 3.1,3.2,3.3,3.4,3.5 (Material)	-
3.6 (vi) (Lead (as Pb) ppm)	-
Table 1 Cl. 3.6, Sl No (iii) (Volatility, Percent by mass)	-
Table 1 Cl. 3.6, Sl No (iv) ("Lead (as Pb), Shoes for infants, children and boys and girls, ppm")	-
Table 1 Cl. 3.6, Sl No (iv) ("Lead (as Pb), for other sized shoes, ppm ")	-

-
Mech- Complete Chem - Complete

IS 15298 : part 4 (2024)

Personal Protective Equipment Part 4 Occupational Footwear (ISO 20347 : 2021, MOD) (Third Revision)

For all class, design and size

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.2 (Design)	-
Cl 5.2.2 (" Height of upper ")	-
Cl 5.2.3 (Heel area)	-
Cl 5.3.1.1 (Construction of whole footwear)	-
Cl 5.3.1.2 (Upper/outsole bond strength)	-
Cl 5.3.2 (Leak proofness)	-
Cl 5.3.3 (Specific ergonomic features)	-
Cl 5.3.6 (Seam strength)	-
Cl 5.4.1.1 (Class I footwear, determination of the area where upper requirements apply of Upper)	-
Cl 5.4.1.2 (Hybrid footwear, determination of the area where upper requirements apply of Upper)	-
Cl 5.4.2 (Thickness)	-
Cl 5.4.3 (Tear strength)	-
Cl 5.4.4, Table 9 (Tensile properties- Tensile strength)	-
Cl 5.4.4, Table 9 (Tensile properties- Breaking Force)	-
Cl 5.4.4, Table 9 (Tensile properties-Modulus at 100 % elongation)	-
Cl 5.4.4, Table 9 (Tensile properties- Elongation at break)	-
Cl 5.4.5 (Flexing resistance)	-
Cl 5.4.6 (Water vapour permeability and coefficient)	-
Cl 5.4.7 (Resistance to hydrolysis)	-
Cl 5.5.2 (Lining- Tear strength)	-
Cl 5.5.3 (Lining- Abrasion resistance)	-
Cl 5.5.4 (Lining-Water vapour permeability and coefficient)	-
Cl 5.6.2 (Tear strength of tongue)	-
Cl 5.7.1 (Thickness of Insole, insock and footbed)	-
Cl 5.7.2 (Water permeability of insock)	-
Cl 5.7.3 (Water absorption and desorption of Insole, insock and footbed)	-
Cl 5.7.4.1 (Abrasion resistance of Insoles)	-
Cl 5.7.4.2 (Abrasion resistance of Insocks)	-
Cl 5.8.2.1 (Thickness of Outsole)	-
Cl 5.8.2.2 (Cleated area)	-
Cl 5.8.2.3 (Cleat height)	-
Cl 5.8.3 (Outsole- Tear strength)	-
Cl 5.8.4 (Outsole- Abrasion resistance)	-
Cl 5.8.5 (Outsole-Flexing resistance)	-
Cl 5.8.6 (Outsole-Resistance to hydrolysis)	-
Cl 5.8.7 (Interlayer bond strength)	-
Cl.1.4.1 of IS 17011 (Table B Sl I ) (Phthalate: DINP)	-
Cl.1.4.1 of IS 17011 (Table B Sl II ) (Phthalate:: DNOP)	-
Cl.1.4.1 of IS 17011 (Table B Sl III ) (Phthalate: DEHP)	-
Cl.1.4.1 of IS 17011 (Table B Sl IV ) (Phthalate: DIDP)	-
Cl.1.4.1 of IS 17011 (Table B Sl V) (Phthalate: BBP)	-
Cl.1.4.1 of IS 17011 (Table B Sl VI ) (Phthalate:DBP)	-
Cl.1.4.1 of IS 17011 (Table B Sl VII ) (Phthalate: DIBP)	-
Cl.4.1 (Annex-A Sl I ) (Organotin: Dibutyltin)	-
Cl.4.1 (Annex-A Sl II ) (Organotin: Dibutyltin Dichloride)	-
Cl.4.1 (Annex-A Sl III ) (Organotin: Dioctyltin)	-
Cl.4.1 (Annex-A Sl IV) (Organotin: Monobutyltin)	-
Cl.4.1 (Annex-A Sl V ) (Organotin: Tributyltin)	-
Cl.4.1 (Annex-A Sl VI) (Organotin: Triphenyltin)	-
Cl.4.1 (Annex-A Sl VII ) (Organotin: Monoctyltin)	-
Cl.4.1 (Annex-A Sl VIII) (Organotin: Bis (tributyltin) oxide)	-
Cl. No.8.6.1,Table 1 of IS 17011 (Chromium)	-
Cl. No.8.6.1,Table 1 of IS 17011 (Formaldehyde (free or released by partial hydrolysis))	-
Cl. No.8.6.1,Table 1 of IS 17011 (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-
Cl.8 - Table No 1 (Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988)	-
Cl.4.1 (Table B-3 Sl I) (Allergenic Disperse Dyes :Disperse blue 3)	-
Cl.4.1 (Table B-3 Sl II) (Allergenic Disperse Dyes :Disperse blue 7)	-
Cl.4.1 (Table B-3 Sl III) (Allergenic Disperse Dyes :Disperse blue 26)	-
Cl.4.1 (Table B-3 Sl IV) (Allergenic Disperse Dyes :Disperse blue 102)	-
Cl.4.1 (Table B-3 Sl V) (Allergenic Disperse Dyes: Disperse brown 1)	-
Cl.4.1 (Table B-3 Sl VI) (Allergenic Disperse Dyes :Disperse yellow 1)	-
Cl.4.1 (Table B-3 Sl VII) (Allergenic Disperse Dyes :Disperse yellow 9)	-
Cl.4.1 (Table B-3 Sl VIII) (Allergenic Disperse Dyes :Disperse yellow 39)	-
Cl.4.1 (Table B-3 Sl IX) (Allergenic Disperse Dyes :Disperse yellow 49)	-
Cl.4.1 (Table B-3 Sl X) (Allergenic Disperse Dyes :Disperse orange 1)	-
Cl.4.1 (Table B-3 Sl XI) (Allergenic Disperse Dyes :Disperse red 11)	-
Cl.4.1 (Table B-3 Sl XII) (Allergenic Disperse Dyes :Disperse red 17)	-
Cl.4.1 (Table B-3 Sl XIII) (Allergenic Disperse Dyes :Disperse yellow 7)	-
Cl.4.1 (Table B-3 Sl XIV) (Allergenic Disperse Dyes :Disperse yellow 56)	-
Cl.4.1 (Table B-3 Sl XV) (Allergenic Disperse Dyes :Disperse red 151)	-
Cl.4.1 (Table B-3 Sl XVI) (Allergenic Disperse Dyes :Solvent red 23)	-
Cl.4.1 (Table B-4 Sl I) (Carcinogenic Disperse Dyes :Navy blue)	-
Cl.4.1 (Table B-4 Sl II) (Carcinogenic Disperse Dyes: Disperse blue 1)	-
Cl.4.1 (Table B-4 Sl III) (Carcinogenic Disperse Dyes: Disperse blue 35)	-
Cl.4.1 (Table B-4 Sl IV) (Carcinogenic Disperse Dyes :Disperse blue 106)	-
Cl.4.1 (Table B-4 Sl V) (Carcinogenic Disperse Dyes: Disperse blue 124)	-
Cl.4.1 (Table B-4 Sl VI) (Carcinogenic Disperse Dyes :Disperse yellow 3)	-
Cl.4.1 (Table B-4 Sl VII) (Carcinogenic Disperse Dyes: Disperse orange 3)	-
Cl.4.1 (Table B-4 Sl VIII) (Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-
Cl.4.1 (Table B-4 Sl IX) (Carcinogenic Disperse Dyes :Disperse red 1)	-
Cl.4.1 (Table B-4 Sl X) (Carcinogenic Disperse Dyes :Basic red 9)	-
Cl.4.1 (Table B-4 Sl XI) (Carcinogenic Disperse Dyes :Violet 3)	-
Cl.4.1 (Table B-4 Sl XII) (Carcinogenic Disperse Dyes Disperse :yellow 23)	-
Cl 5.3.5, Table no 1 of IS 17011 (ix) (PCP-TeCP-TriCP polychlorophenols)	-

-
Mech- Except Slip resistance Chem - Complete, Material declaration required for Innocuousness test.

IS 15298 : Part 3 (2024)

Personal Protective Equipment Part 3 Protective Footwear (ISO 20346 : 2021, MOD) (Third Revision)

For all class, design and size

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.2 (Design)	-
Cl 5.2.2 (" Height of upper ")	-
Cl 5.2.3 (Heel area)	-
Cl 5.3.1.1 (Construction of whole footwear)	-
Cl 5.3.1.2 (Upper/outsole bond strength)	-
Cl 5.3.2.1 (Toe protection - general)	-
Cl 5.3.2.2 (Internal length)	-
Cl 5.3.2.3 (Width of toecap flange)	-
Cl 5.3.2.4.1 (Corrosion resistance of Class I footwear and hybrid mounted footwear)	-
Cl 5.3.2.4.2 (Corrosion resistance of Class II and hybrid moulded footwear)	-
Cl 5.3.2.5 (Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-
Cl 5.3.2.6 (Impact resistance)	-
Cl 5.3.2.7 (Compression resistance)	-
Cl 5.3.3 (Leak proofness)	-
Cl 5.3.4 ("Specific ergonomic features ")	-
Cl 5.3.7 (Seam strength)	-
Cl 5.4.1.1 (Class I footwear, determination of the area where upper requirements apply of Upper)	-
Cl 5.4.1.2 (Hybrid footwear, determination of the area where upper requirements apply of Upper)	-
Cl 5.4.2 (Thickness)	-
Cl 5.4.3 (Tear strength)	-
Cl 5.4.4, Table 11 (Tensile properties- Tensile strength)	-
Cl 5.4.4, Table 11 (Tensile properties- Breaking Force)	-
Cl 5.4.4, Table 11 (Tensile properties-Modulus at 100 % elongation)	-
Cl 5.4.4, Table 11 (Tensile properties- Elongation at break)	-
Cl 5.4.6 (Water vapour permeability and coefficient)	-
Cl 5.4.7 (Resistance to hydrolysis)	-
Cl 5.5.2 (Lining- Tear strength)	-
Cl 5.5.3 (Lining- Abrasion resistance)	-
Cl 5.5.4 (Lining-Water vapour permeability and coefficient)	-
Cl 5.6.2 (Tear strength of tongue)	-
Cl 5.7.1 (Thickness of Insole, insock and footbed)	-
Cl 5.7.2 (Water permeability of insock)	-
Cl 5.7.3 (Water absorption and desorption of Insole, insock and footbed)	-
Cl 5.7.4.1 (Abrasion resistance of Insoles)	-
Cl 5.7.4.2 (Abrasion resistance of Insocks)	-
Cl 5.8.2.1 (Thickness of Outsole)	-
Cl 5.8.2.2 (Cleated area)	-
Cl 5.8.2.3 (Cleat height)	-
Cl 5.8.3 (Outsole- Tear strength)	-
Cl 5.8.4 (Outsole- Abrasion resistance)	-
Cl 5.8.5 (Outsole-Flexing resistance)	-
Cl 5.8.6 (Outsole-Resistance to hydrolysis)	-
Cl 5.8.7 (Interlayer bond strength)	-
Cl 5.3.6, Table no 1 of IS 17011 (ix) (PCP-TeCP-TriCP polychlorophenols)	-

-
Mech- Except Slip resistance Chem- Complete, Material declaration required for Innocuousness test.

IS 15914 (2011)

High tensile strength flat rolled steel plate (Up To 6 Mm), sheet and strip for the manufacture of welded gas cylinder - Specification

All grades

Rs. 7760/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 (UTM)	-
Cl 9 (Workmanship)	-
Cl. 10 (Mass)	-
Cl 10 (Length, Width & Thickness)	-
Cl. 7 Table 3 (Elongation)	-
Cl. 7 Table 3 (Yield Stress)	-
6.0 (CARBON)	-
6.0 (SULPHUR)	-
6.0 (PHOSPHORUS)	-
6.0 (MANGANESE)	-
6.0 (SILICON)	-
6.0 (NITROGEN)	-

-
Except C,S, P, Mn, Si, N(except Al and microalloying elements), Grade to be declared

First
Prev
1
2
3
4
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Eastern Regional Laboratory (ERL)

(1) Annex Building & Sample-Cell: Bureau of Indian Standards, P-230, CIT Scheme, VII- M, Block-W,Kankurgachi,Kolkata-700054 (2) Main building: 1/14, CIT Scheme VII M, VIP Road, Kankurgachi,Kolkata-700054, Kolkata, Kolkata, West Bengal, 700054

- erol@bis.gov.in

Scope List