BIS - LIMS (Laboratory Information Management System)

M/s. TUV INDIA PVT LTD

Plot No. 105, Peenya 3rd phase, sy.no. 90,92 and 93 Peenya Village, Yeshwanthapura Hobli,, BANGALORE, Bengaluru Urban, Karnataka, 560058

9182140492 rchaitanya@tuv-nord.com

Scope List

Reset

12 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.6(Power interface .)	-	2000	-
1.7(Markings and instructions)	-	1000	-
2.1(Protection from electric shock and energy hazards)	-	1500	-
2.2(SELV circuits)	-	1500	-
2.3(TNV circuits)	-	1500	-
2.4(Limited current circuits)	-	1500	-
2.5(Limited power sources .)	-	1500	-
2.6(Provisions for earthing and bonding)	-	1500	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	1500	-
2.8(Safety interlocks)	-	1500	-
2.9(Electrical insulation)	-	36000	300/Hour
2.10(Clearances, creepage distances and distances through insulation)	-	1500	-
3.1(General)	-	0	-
3.2(Connection to a mains supply)	-	1500	-
3.3(Wiring terminals for connection of external conductors)	-	0	-
4.1(Stability)	-	1500	-
4.2(Mechanical strength)	-	1500	-
4.3(Design and construction)	-	1500	-
4.4(Protection against hazardous moving parts)	-	1500	-
1.5(Components)	-	0	-
4.6(Openings in enclosures)	-	1500	-
4.7(Resistance to fire)	-	1500	-
5.2(Electric strength)	-	1500	-
5.3(Abnormal operating and fault conditions)	-	4000	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	0	-
7.1(General)	-	0	-
Annex A3(Hot flaming oil test)	-	0	-
Annex B(Motor tests under abnormal conditions)	-	0	-
Annex C(Transformers)	-	0	-
Annex U(Insulating winding wires for use without interleaved insulation)	-	0	-
4.5(Thermal requirements)	-	4000	-
3.4(Disconnection from the mains supply)	-	1000	-
3.5(Interconnection of equipment)	-	500	-
5.1(Touch current and protective conductor curren)	-	2000	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	2000	-
6.3(Protection of the telecommunication wiring system from overheating)	-	2000	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	2000	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	2000	-
7.4(Insulation between primary circuits and cable distribution systems)	-	1000	-
1.5(Components)	-	0	-

23 Dec, 2027

-
-

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General test conditions)	-	0	-
5(Marking and instructions)	-	2000	-
7(Heating under normal operating conditions)	-	7000	-
8(Constructional requirements with regard to the protection against electric shock)	-	3000	-
9(Electric shock hazard under normal operating conditions)	-	3000	-
10(Insulation requirements)	-	15000	-
12(Mechanical strength)	-	10000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	3000	-
15(TERMINALS)	-	4000	-
16(External flexible cords)	-	3000	-
17(Electrical connections and mechanical fixings)	-	3000	-
19(Stability and mechanical hazards)	-	3000	-
20(Resistance to fire)	-	3000	-
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	0	-
11(Fault conditions)	-	2000	-
14(Components)	-	0	-

23 Dec, 2027

-
-

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

58500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1500	-
8(Protection against live parts)	-	1500	-
10(POWER INPUT AND CURRENT)	-	1500	-
11(HEATING)	-	10000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1500	-
14(IMPULSE VOLTAGE TEST)	-	1500	-
15(HUMIDITY TREATMENT TEST)	-	14400	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1500	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1500	-
18(ENDURANCE)	-	10000	-
19(ABNORMAL OPERATION)	-	5000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	Each
22(CONSTRUCTION)	-	1500	-
23(INTERNAL WIRING)	-	1500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1500	-
27(PROVISION FOR EARTHING)	-	1500	-
28(SCREWS AND CONNECTIONS)	-	1500	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1500	-
30(RESISTANCE TO HEAT AND FIRE)	-	2000	Each
31(RESISTANCE TO RUSTING)	-	1500	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	3000	-
6.0(Classification)	-	500	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	500	-
21(MECHANICAL STRENGTH)	-	2000	-
24(COMPONENTS)	-	0	-

23 Dec, 2027

-
-

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	-
8(Protection against accidental contact with live parts)	-	3000	-
10(PROVISION FOR EARTHING)	-	3000	-
9(Terminals)	-	2000	-
11(MOISTURE RESISTANCE)	-	300	Per Hour
12(Electric Strength)	-	4000	-
14(Fault conditions)	-	5000	-
15(Transformer heating)	-	4000	-
17(Creepage distance and clearances)	-	3000	-
18(Screws, current carrying parts and connections)	-	1500	-
19(Resistance to heat, fire and tracking)	-	2000	-
20(Resistance to corrosion)	-	1500	-
16(Construction)	-	0	-

23 Dec, 2027

-
-

IS 10322 : Part 5 : Sec 2 (2012)

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking)	-	2000	-
7(Construction)	-	2000	-
8(Creepage Distance and Clearances)	-	3000	-
9(Provision for earthing)	-	3000	-
10(Terminals)	-	2000	-
11(External & Internal Wiring)	-	3000	-
12(Protection against electric shock)	-	2000	-
13(Endurance Tests and Thermal Tests)	-	5000	-
14(Resistance to Dust and Moisture)	-	300	Given Charges are per hour
15(Insulation Resistance and Electric Strength)	-	4000	-
16(Resistance to Heat , fire and tracking)	-	4000	-
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-

23 Dec, 2027

-
-

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	2000	-
7.0(Construction)	-	2000	-
8.0(Creepage Distance and Clearances)	-	3000	-
9.0(Provision for earthing)	-	3000	-
10.0(Terminals)	-	2000	-
11.0(External & Internal Wiring)	-	3000	-
12.0(Protection against electric shock)	-	2000	-
13.0(Endurance Tests and Thermal Tests)	-	5000	-
14.0(Resistance to Dust & Moisture)	-	300	Given Charges are per hour
15.0(Insulation Resistance and Electric Strength)	-	4000	-
16.0(Resistance to Heat , fire and tracking)	-	4000	-
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-

23 Dec, 2027

-
-

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1500	-
8.1.1(Protection against live parts in all positions)	-	1500	-
8.1.2(Protection against live parts in openings)	-	1500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1500	-
8.1.4(Protection against live parts against protective impedance)	-	1500	-
10.1(Power input)	-	1500	-
10.2(Current input)	-	1500	-
11.1(General)	-	0	-
11.2(General)	-	0	-
11.3(Heating)	-	10000	-
13.1(General)	-	0	-
13.2(Leakage current at operating temperature)	-	1500	-
14(Transient Over Voltages)	-	1500	-
15.0(General)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1500	-
15.2(Spillage Test)	-	1500	-
15.3(Humidity Test)	-	14400	-
16.0(General)	-	0	-
16.1(General)	-	0	-
16.2(Leakage Current (after Clause 15))	-	1500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1500	-
17(Over Load Protection of Transformers and associated circuits)	-	1500	-
19(Abnormal Operation)	-	3000	-
20(Stability test)	-	1000	Each
21(Mechanical Strength Test)	-	1500	-
22(Construction verification related test)	-	1500	-
23(General)	-	1500	-
25(Supply connection and external flexible cords)	-	1500	-
26(Terminals for external conductors)	-	1500	-
27(Provision for earthing)	-	1500	-
28(Screw test and connections)	-	1500	-
29(clearance, creepage distances and solid insulation)	-	1500	-
30.1(Ball pressure test)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
31(Resistance to Rusting)	-	1500	-
8.1.5(Live parts of built-in appliances)	-	0	-
11.4(Heating appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.6(Combined appliances)	-	0	-
11.7(Duration corresponding)	-	0	-
11.8(Temperature rise)	-	0	-
19.11.4.1(Electrostatic discharges)	-	3000	-
19.11.4.3(Fast transient bursts)	-	3000	-
19.11.4.4(Surge immunity test)	-	3000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1500	-
24(Components)	-	0	-

23 Dec, 2027

-
24 (Components) 19.11.4.2 (Radiated fields)

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	2000	-
6(Interchangeability)	-	5000	-
7(Protection against accidental contact with live parts)	-	3000	-
8(Insulation Resistance and Electric Strength)	-	4000	-
9(MECHANICAL STRENGTH)	-	4000	-
10(cap temperature)	-	5000	-
11(Resistance to Heat)	-	3000	-
12(Resistance to Flame and Ignition)	-	3000	-
13(Fault conditions)	-	3000	-
14(Creepage distance and clearances)	-	2000	-

23 Dec, 2027

-
-

IS 16333 : Part 3 (2017)

Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(Inputting of text)	-	15000		-
5.2(Message Readability)	-	15000		-

23 Dec, 2027

-
-

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

1950000 View breakup
For Ni-Cd/Ni-MH/Li-System up to 250 Ah Rs.1350000/ For vented type cell / Battery Rs. 1300000/ For Lead acid cell/ Battery Rs.1950000/ (Range >250Ah to 400Ah)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Photovoltaic Energy System)	-	5000	-
Cl-4.2(Secondary Cells and Batteries)	-	5000	-
Cl-4.3(General Operating Conditions)	-	5000	-
Cl-4.3.8(Storage)	-	5000	-
Cl-5.1(Mechanical Endurance)	-	5000	-
Cl-5.2(Charge Efficiency)	-	5000	-
Cl-5.3(Deep Discharge Protection)	-	5000	-
Cl-5.4(Marking)	-	5000	-
Cl-5.5(Safety)	-	5000	-
Cl-5.6(Documentation)	-	5000	-
Cl-6(Functional characteristice)	-	5000	-
Cl-7(General test conditions)	-	5000	-
Cl-8.1(Capacity Test)	-	20000	-
Cl-8.2(Endurance Test)	-	800000	-
Cl-8.3(Charge Retention Test)	-	30000	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	1500000	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	25000	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	40000	-
4.3.7.1(Specific gravity)	-	5000	-
Cl-9.1(Type Tests)	-	5000	-
Cl-9.2(Acceptance Test)	-	5000	-
Cl-4.3.9(Operating Temperature)	-	5000	-

23 Dec, 2027

-
Included.w.e.f.04.12.2024

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

480000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	5000	-
5(General Safety Considerations)	-	5000	-
5.1(General)	-	5000	-
5.2(Insulation and Wiring)	-	10000	-
5.3(Venting)	-	5000	-
5.4(Temperature, Voltage and Current Management)	-	5000	-
5.5(Terminal Contacts)	-	5000	-
5.6(Assembly of Cells into batteries)	-	5000	-
5.7(Quality Plan)	-	5000	-
5.8(Battery Safety Components)	-	5000	-
6(Type Test and Sample Size)	-	5000	-
7(Specific requirements and tests)	-	5000	-
7.1(Charging procedure for test purposes)	-	20000	-
7.2(Intended Use)	-	30000	-
7.3(Reasonably foreseeable misuse)	-	330000	-
8(Information for safety)	-	5000	-
8.1(General)	-	5000	-
8.2(Small Cell and battery safety information)	-	5000	-
9(Marking)	-	5000	-
9.1(Cell Marking)	-	5000	-
9.2(Battery Marking)	-	5000	-
9.3(Caution for ingestion of small cells and batteries)	-	5000	-
9.4(Other information)	-	1000	-
10(Packaging)	-	5000	-
4(Parameter Measurement Tolerances)	-	5000	-
5(General Safety Considerations)	-	5000	-
5.1(General)	-	5000	-
5.2(Insulation and Wiring)	-	10000	-
5.3(Venting)	-	5000	-
5.4(Temperature, Voltage and Current Management)	-	5000	-
5.5(Terminal Contacts)	-	5000	-
5.6(Assembly of Cells into batteries)	-	5000	-
5.7(Quality Plan)	-	5000	-
5.8(Battery Safety Components)	-	5000	-
6(Type Test and Sample Size)	-	5000	-
7(Specific requirements and tests)	-	5000	-
7.1(Charging procedure for test purposes)	-	20000	-
7.2(Intended Use)	-	30000	-
7.3(Reasonably foreseeable misuse)	-	330000	-
8(Information for safety)	-	5000	-
8.1(General)	-	5000	-
8.2(Small Cell and battery safety information)	-	5000	-
9(Marking)	-	5000	-
9.1(Cell Marking)	-	5000	-
9.2(Battery Marking)	-	5000	-
9.3(Caution for ingestion of small cells and batteries)	-	5000	-
9.4(Other information)	-	1000	-
10(Packaging)	-	5000	-

23 Dec, 2027

-
Included w.e.f.04.2024

IS 16046 : Part 1 (2018)

340000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	-
5(General Safety Considerations)	-	0	-
5.1(General)	-	0	-
5.2(Insulation and Wiring)	-	10000	-
5.3(Venting)	-	5000	-
5.4(Temperature, Voltage and Current Management)	-	5000	-
5.5(Terminal Contacts)	-	5000	-
5.6(Assembly of Cells into batteries)	-	5000	-
5.7(Quality Plan)	-	5000	-
6(Tyoe Test amd Sample Size)	-	5000	-
7(Specific requirements and tests)	-	0	-
7.1(Charging procedure for test purposes)	-	20000	-
7.2(Intended Use)	-	100000	-
7.3(Reasonably foreseeable misuse)	-	150000	-
8(Information for safety)	-	5000	-
8.1(General)	-	5000	-
8.2(Small Cell and battery safety information)	-	10000	-
9(Marking)	-	5000	-
9.1(Cell Marking)	-	5000	-
9.2(Battery Marking)	-	10000	-
9.3(Caution for ingestion of small cells and batteries)	-	10000	-
9.4(Other information)	-	5000	-
10(Packaging)	-	5000	-

23 Dec, 2027

-
Included w.e.f.04.12.2024

Bureau of Indian Standards

The National Standards Body of India

M/s. TUV INDIA PVT LTD

Plot No. 105, Peenya 3rd phase, sy.no. 90,92 and 93 Peenya Village, Yeshwanthapura Hobli,, BANGALORE, Bengaluru Urban, Karnataka, 560058

9182140492 rchaitanya@tuv-nord.com

Scope List